Merge pull request #673 from Telecominfraproject/main

v3.1.0 merge

.github/workflows/build-dev.yml

@@ -21,7 +21,7 @@ jobs:
     strategy:
       fail-fast: false
       matrix:
-        target: [ 'cig_wf186h', 'cig_wf186w', 'cig_wf188n', 'cig_wf196', 'cig_wf189', 'cybertan_eww631-a1', 'cybertan_eww631-b1','sonicfi_rap630c-311g', 'sonicfi_rap630w-311g', 'sonicfi_rap630w-211g', 'edgecore_eap101', 'edgecore_eap102', 'edgecore_eap104', 'edgecore_eap105', 'edgecore_eap111', 'edgecore_eap112', 'edgecore_oap101', 'edgecore_oap101-6e', 'edgecore_oap101e', 'edgecore_oap101e-6e', 'hfcl_ion4xe', 'hfcl_ion4xi', 'hfcl_ion4x', 'hfcl_ion4x_2', 'hfcl_ion4x_3', 'hfcl_ion4xi_w', 'hfcl_ion4x_w', 'indio_um-305ax', 'sercomm_ap72tip', 'udaya_a6-id2', 'wallys_dr5018', 'wallys_dr6018', 'wallys_dr6018-v4', 'yuncore_ax820', 'yuncore_ax840', 'yuncore_fap640', 'yuncore_fap650', 'yuncore_fap655' ]
+        target: [ 'cig_wf186h', 'cig_wf186w', 'cig_wf188n', 'cig_wf196', 'cig_wf189', 'cybertan_eww631-a1', 'cybertan_eww631-b1', 'edgecore_eap101', 'edgecore_eap102', 'edgecore_eap104', 'edgecore_eap111', 'edgecore_ecw5211', 'edgecore_oap101', 'edgecore_oap101-6e', 'edgecore_oap101e', 'edgecore_oap101e-6e', 'hfcl_ion4', 'hfcl_ion4xe', 'hfcl_ion4xi', 'hfcl_ion4x', 'hfcl_ion4x_2', 'hfcl_ion4x_3', 'hfcl_ion4xi_w', 'hfcl_ion4x_w', 'indio_um-305ax', 'indio_um-325ac', 'indio_um-510ac-v3', 'indio_um-550ac', 'sercomm_ap72tip', 'udaya_a5-id2', 'udaya_a6-id2', 'wallys_dr40x9', 'wallys_dr6018', 'wallys_dr6018-v4', 'yuncore_ax820', 'yuncore_ax840', 'yuncore_fap640', 'yuncore_fap650', 'yuncore_fap655' ]
 
     steps:
     - uses: actions/checkout@v3

feeds/ipq807x_v5.4/ath11k-wifi/Makefile

@@ -32,12 +32,9 @@ ALLWIFIBOARDS:= \
 	cybertan-eww622-a1 \
 	cybertan-eww631-a1 \
 	cybertan-eww631-b1 \
-	sonicfi-rap630c-311g \
-	sonicfi-rap630w-311g \
 	edgecore-eap101 \
 	gl-ax1800 \
 	gl-axt1800 \
-	gl-b3000 \
 	sercomm-wallaby \
 	edgecore-eap102 \
 	edgecore-oap102 \
@@ -48,7 +45,6 @@ ALLWIFIBOARDS:= \
 	indio-um-510axm-v1 \
 	muxi-ap3220l \
 	plasmacloud-pax1800 \
-	wallys-dr5018 \
 	wallys-dr6018 \
 	wallys-dr6018-v4 \
 	tplink-ex227 \
@@ -109,11 +105,6 @@ $(call Package/ath11k-wifi-default)
     TITLE:=gl-axt1800 bdf
 endef
 
-define Package/ath11k-wifi-gl-b3000
-$(call Package/ath11k-wifi-default)
-    TITLE:=gl-b3000 bdf
-endef
-
 define Package/ath11k-wifi-motorola-q14
 $(call Package/ath11k-wifi-default)
     TITLE:=motorola q14 bdf
@@ -299,13 +290,6 @@ define Package/ath11k-wifi-gl-axt1800/install
 	$(INSTALL_DATA) ./board-gl-axt1800.bin.IPQ6018 $(1)/lib/firmware/ath11k/IPQ6018/hw1.0/board-2.bin
 endef
 
-define Package/ath11k-wifi-gl-b3000/install
-	$(INSTALL_DIR) $(1)/lib/firmware/ath11k/IPQ5018/hw1.0/
-	$(INSTALL_DIR) $(1)/lib/firmware/ath11k/qcn6122/hw1.0/
-	$(INSTALL_DATA) ./board-gl-b3000.bin.IPQ5018 $(1)/lib/firmware/ath11k/IPQ5018/hw1.0/board.bin
-	$(INSTALL_DATA) ./board-gl-b3000.bin.QCN6122 $(1)/lib/firmware/ath11k/qcn6122/hw1.0/board.bin
-endef
-
 define Package/ath11k-wifi-motorola-q14/install
 	$(INSTALL_DIR) $(1)/lib/firmware/ath11k/IPQ5018/hw1.0/
 	$(INSTALL_DIR) $(1)/lib/firmware/ath11k/qcn6122/hw1.0/
@@ -392,8 +376,6 @@ $(eval $(call generate-ath11k-wifi-package,cig-wf194c4,Cigtech WF194c4))
 $(eval $(call generate-ath11k-wifi-package,cybertan-eww622-a1,CyberTan EWW622 A1))
 $(eval $(call generate-ath11k-wifi-package,cybertan-eww631-a1,CyberTan EWW631 A1))
 $(eval $(call generate-ath11k-wifi-package,cybertan-eww631-b1,CyberTan EWW631 B1))
-$(eval $(call generate-ath11k-wifi-package,sonicfi-rap630c-311g,Sonicfi RAP630C 311G))
-$(eval $(call generate-ath11k-wifi-package,sonicfi-rap630w-311g,Sonicfi RAP630W 311G))
 $(eval $(call generate-ath11k-wifi-package,sercomm-wallaby,Sercomm Kiwi))
 $(eval $(call generate-ath11k-wifi-package,wallys-dr6018,Wallys DR6018))
 $(eval $(call generate-ath11k-wifi-package,wallys-dr6018-v4,Wallys DR6018 V4))
@@ -413,7 +395,6 @@ $(eval $(call generate-ath11k-wifi-package,muxi-ap3220l,MUXI AP3220L))
 $(eval $(call generate-ath11k-wifi-package,yuncore-fap650,YunCore FAP650))
 $(eval $(call generate-ath11k-wifi-package,yuncore-fap655,YunCore FAP655))
 $(eval $(call generate-ath11k-wifi-package,udaya-a6-id2,Udaya A6-ID2))
-$(eval $(call generate-ath11k-wifi-package,wallys-dr5018,Wallys DR5018))
 
 $(foreach PACKAGE,$(ALLWIFIPACKAGES),$(eval $(call BuildPackage,$(PACKAGE))))
 $(eval $(call BuildPackage,ath11k-wifi-qcom-ipq5018))

feeds/ipq807x_v5.4/hostapd/Makefile

@@ -601,11 +601,10 @@ define Package/afcd/install
 	$(INSTALL_DIR) $(1)/usr/share/hostap $(1)/etc/init.d
 	$(INSTALL_BIN) ./files/afcd.init $(1)/etc/init.d/afcd
 	$(INSTALL_DATA) ./files/afcd.uc $(1)/usr/share/hostap/
-	$(INSTALL_DATA) ./files/afc_location.uc $(1)/usr/share/hostap/
 endef
 
 define Install/hostapd
-	$(INSTALL_DIR) $(1)/usr/sbin $(1)/usr/share/hostap $(1)/etc/init.d
+	$(INSTALL_DIR) $(1)/usr/sbin $(1)/usr/share/hostap
 	$(INSTALL_DATA) ./files/hostapd.uc $(1)/usr/share/hostap/
 	$(INSTALL_DIR) $(1)/etc/init.d $(1)/etc/config $(1)/etc/radius
 	ln -sf hostapd $(1)/usr/sbin/hostapd-radius
@@ -613,8 +612,6 @@ define Install/hostapd
 	$(INSTALL_DATA) ./files/radius.config $(1)/etc/config/radius
 	$(INSTALL_DATA) ./files/radius.clients $(1)/etc/radius/clients
 	$(INSTALL_DATA) ./files/radius.users $(1)/etc/radius/users
-	$(INSTALL_BIN) ./files/mpskd $(1)/usr/share/hostap/
-	$(INSTALL_BIN) ./files/mpskd.init $(1)/etc/init.d/mpskd
 endef
 
 define Install/supplicant

feeds/ipq807x_v5.4/hostapd/files/afc_location.uc

@@ -1,23 +0,0 @@
-#!/usr/bin/env ucode
-'use strict';
-let fs = require("fs");
-let ubus = require('ubus').connect();
-
-let gps_info = ubus.call('gps', 'info');
-let latitude = gps_info.latitude ?? 0;
-let longitude = gps_info.longitude ?? 0;
-
-// afc-location.json file content
-let afc_location = {};
-afc_location.location_type = "ellipse";
-afc_location.location = longitude + ":" + latitude ;
-afc_location.height = gps_info.elevation ?? 0;
-afc_location.height_type = "AMSL";
-afc_location.major_axis = gps_info.major_axis ?? 0;
-afc_location.minor_axis = gps_info.minor_axis ?? 0;
-afc_location.orientation = gps_info.major_orientation ?? 0;
-afc_location.vertical_tolerance = gps_info.vdop ?? 0;
-
-let afc_location_json = fs.open("/etc/ucentral/afc-location.json", "w");
-afc_location_json.write(afc_location);
-afc_location_json.close();

feeds/ipq807x_v5.4/hostapd/files/afcd.init

@@ -4,7 +4,6 @@ START=19
 
 USE_PROCD=1
 NAME=afcd
-PROG=/usr/bin/ucode
 
 add_afc() {
 	config_get_bool disabled "$1" disabled 0
@@ -15,16 +14,8 @@ add_afc() {
 	[ -n "$url" ] || return
 
 	procd_open_instance afcd
-	procd_set_param command "$PROG" /usr/share/hostap/afcd.uc -u "$url"
-	[ -n "$cert" ] && procd_append_param command -c "$cert"
-	procd_set_param respawn
-	procd_close_instance
-}
-
-_afc_location() {
-	# create afc-location.json
-	procd_open_instance
-	procd_set_param command "$PROG" /usr/share/hostap/afc_location.uc
+	procd_set_param command /usr/bin/ucode /usr/share/hostap/afcd.uc -u "$url"
+	[ -n "$cert" ] && procd_append_param command -c "$cert" 
 	procd_set_param respawn
 	procd_close_instance
 }
@@ -32,9 +23,6 @@ _afc_location() {
 start_service() {
 	config_load wireless
 	config_foreach add_afc afc-server
-
-	local gps_disabled=$(uci get gps.@gps[-1].disabled)
-	[ "$gps_disabled" -eq 0 ] && _afc_location
 }
 
 service_triggers()

feeds/ipq807x_v5.4/hostapd/files/afcd.uc

@@ -72,7 +72,7 @@ function handle_request(req)
 
 	let cl = uclient.new(opts.url, null, cb);
 
-	if (!cl.ssl_init({ verify: !!opts.cert, ca_files: [ opts.cert ] })) {
+	if (!cl.ssl_init({ verify: true, ca_files: [ opts.cert ] })) {
 		warn(`Failed to initialize SSL\n`);
 		return false;
 	}

feeds/ipq807x_v5.4/hostapd/files/hostapd.sh

@@ -47,8 +47,8 @@ hostapd_append_wpa_key_mgmt() {
 			[ "${ieee80211w:-0}" -gt 0 ] && append wpa_key_mgmt "WPA-${auth_type_l}-SHA256"
 		;;
 		eap192)
-			[ "${ieee80211r:-0}" -gt 0 ] || append wpa_key_mgmt "WPA-EAP-SUITE-B-192"
-			[ "${ieee80211r:-0}" -gt 0 ] && append wpa_key_mgmt "FT-EAP-SHA384"
+			append wpa_key_mgmt "WPA-EAP-SUITE-B-192"
+			[ "${ieee80211r:-0}" -gt 0 ] && append wpa_key_mgmt "FT-EAP"
 		;;
 		eap-eap2)
 			append wpa_key_mgmt "WPA-EAP"
@@ -73,10 +73,6 @@ hostapd_append_wpa_key_mgmt() {
 		owe)
 			append wpa_key_mgmt "OWE"
 		;;
-		psk2-radius)
-			append wpa_key_mgmt "WPA-PSK"
-			[ "${ieee80211r:-0}" -gt 0 ] && append wpa_key_mgmt "FT-PSK"
-		;;
 	esac
 
 	[ "$fils" -gt 0 ] && {
@@ -409,7 +405,7 @@ hostapd_common_add_bss_config() {
 
 	config_add_boolean ieee80211r pmk_r1_push ft_psk_generate_local ft_over_ds
 	config_add_int r0_key_lifetime reassociation_deadline ft_l2_refresh
-	config_add_string mobility_domain r1_key_holder ft_key
+	config_add_string mobility_domain r1_key_holder
 	config_add_array r0kh r1kh
 
 	config_add_int ieee80211w_max_timeout ieee80211w_retry_timeout
@@ -1018,7 +1014,7 @@ hostapd_set_bss_options() {
 			[ -n "$ft_l2_refresh" ] && append bss_conf "ft_l2_refresh=$ft_l2_refresh" "$N"
 
 			if [ "$skip_kh_setup" -eq "0" ]; then
-				json_get_vars r0_key_lifetime r1_key_holder pmk_r1_push ft_key
+				json_get_vars r0_key_lifetime r1_key_holder pmk_r1_push
 				json_get_values r0kh r0kh
 				json_get_values r1kh r1kh
 
@@ -1026,15 +1022,12 @@ hostapd_set_bss_options() {
 				set_default pmk_r1_push 0
 
 				[ -n "$r0kh" -a -n "$r1kh" ] || {
-					[ -z "$ft_key" ] && {
-						key=`echo -n "$mobility_domain/$auth_secret" | md5sum | awk '{print $1}'`
+					key=`echo -n "$mobility_domain/$auth_secret" | md5sum | awk '{print $1}'`
 
-						set_default r0kh "ff:ff:ff:ff:ff:ff,*,$key"
-						set_default r1kh "00:00:00:00:00:00,00:00:00:00:00:00,$key"
-					}
+					set_default r0kh "ff:ff:ff:ff:ff:ff,*,$key"
+					set_default r1kh "00:00:00:00:00:00,00:00:00:00:00:00,$key"
 				}
 
-				[ -n "$ft_key" ] && append bss_conf "ft_key=$ft_key" "$N"
 				[ -n "$r1_key_holder" ] && append bss_conf "r1_key_holder=$r1_key_holder" "$N"
 				append bss_conf "r0_key_lifetime=$r0_key_lifetime" "$N"
 				append bss_conf "pmk_r1_push=$pmk_r1_push" "$N"

feeds/ipq807x_v5.4/hostapd/files/hostapd.uc

@@ -833,8 +833,6 @@ let main_obj = {
 			hostapd.printf(`Set new config for phy ${phy}: ${file}`);
 			iface_set_config(phy, config);
 
-			hostapd.data.auth_obj.notify("reload", { phy });
-
 			return {
 				pid: hostapd.getpid()
 			};
@@ -874,9 +872,6 @@ let main_obj = {
 hostapd.data.ubus = ubus;
 hostapd.data.obj = ubus.publish("hostapd", main_obj);
 
-let auth_obj = {};
-hostapd.data.auth_obj = ubus.publish("hostapd-auth", auth_obj);
-
 function bss_event(type, name, data) {
 	let ubus = hostapd.data.ubus;
 
@@ -906,23 +901,5 @@ return {
 	},
 	bss_remove: function(name, obj) {
 		bss_event("remove", name);
-	},
-	sta_auth: function(iface, sta) {
-		let msg = { iface, sta };
-		let ret = {};
-		let data_cb = (type, data) => {
-			ret = { ...ret, ...data };
-		};
-		hostapd.data.auth_obj.notify("sta_auth", msg, data_cb, null, null, 1000);
-		return ret;
-	},
-	sta_connected: function(iface, sta, data) {
-		let msg = { iface, sta, ...data };
-		let ret = {};
-		let data_cb = (type, data) => {
-			ret = { ...ret, ...data };
-		};
-		hostapd.data.auth_obj.notify("sta_connected", msg, data_cb, null, null, 1000);
-		return ret;
-	},
+	}
 };

feeds/ipq807x_v5.4/hostapd/files/mpskd

@@ -1,335 +0,0 @@
-#!/usr/bin/env ucode
-'use strict';
-import * as uloop from 'uloop';
-import * as libubus from 'ubus';
-
-uloop.init();
-let ubus = libubus.connect();
-
-let interfaces = {};
-let ssids = {};
-let cache = {};
-let sub_6g = [];
-let sub_6g_obj;
-let reload_timer;
-let gc_timer;
-
-let timeout = 48 * 60 * 60;
-
-function event_cb_6g(req) {
-	//printf('6g %s %.J\n', req.data, req.type);
-	if (req.type != 'auth' && req.type != 'probe')
-		return 0;
-
-	let addr = req.data.address;
-	let iface = interfaces[req.data.ifname];
-	if (!iface)
-		return 0;
-
-	let ssid = iface.ssid;
-	if (!ssid || !length(ssids[ssid].keys))
-		return 0;
-
-	let ssid_cache = cache[ssid];
-	if (ssid_cache && ssid_cache[addr])
-		return 0;
-
-	if (req.type == 'probe') {
-		printf(`Ignore probe ${req.type} on ${req.data.ifname} from ${addr}\n`);
-		return 1;
-	}
-
-	printf(`reject ${req.type} on ${req.data.ifname} from ${addr}\n`);
-	return 5;
-}
-
-function event_cb(req) {
-	//printf('normal %s %.J\n', req.data, req.type);
-	if (req.type != 'probe')
-		return 0;
-
-	let addr = req.data.address;
-	let iface = interfaces[req.data.ifname];
-	if (!iface)
-		return 0;
-
-	let ssid = iface.ssid;
-	if (!ssid || !length(ssids[ssid].keys))
-		return 0;
-
-	let ssid_cache = cache[ssid];
-	if (ssid_cache && ssid_cache[addr])
-		return 0;
-
-	printf(`reply to ${req.type} on ${req.data.ifname} from ${addr} without 6G RNR\n`);
-	return 2; 
-}
-
-function create_6g_subscriber() {
-	for (let cur_sub in sub_6g)
-		cur_sub.remove();
-	sub_6g = [];
-
-	for (let ifname, iface in interfaces) {
-		let obj = 'hostapd.' + ifname;
-		let cur_sub;
-		if (iface.band == '6g')
-			cur_sub = ubus.subscriber((req) => event_cb_6g(req));
-		else
-			cur_sub = ubus.subscriber((req) => event_cb(req));
-		cur_sub.subscribe(obj);
-		push(sub_6g, cur_sub);
-		printf(`subscribe ${ifname}\n`);
-		ubus.call(obj, 'notify_response', { notify_response: 1 });
-	}
-}
-
-function cache_gc() {
-	let ts = time();
-
-	for (let ssid in keys(cache)) {
-		if (!ssids[ssid]) {
-			delete cache[ssid];
-			continue;
-		}
-
-		let ssid_cache = cache[ssid];
-		ssid = ssids[ssid];
-
-		for (let addr in keys(ssid_cache)) {
-			let sta = ssid_cache[addr];
-			let keep = ts < cache.timeout;
-
-			if (keep && !ssid.keys[sta.key])
-				keep = false;
-			if (keep)
-				sta.keydata = ssid.keys[sta.key];
-			if (!keep)
-				delete cache[addr];
-		}
-	}
-}
-
-function netifd_reload() {
-	let data = ubus.call('network.wireless', 'status');
-
-	ssids = {};
-	interfaces = {};
-
-	for (let radio_name, radio in data) {
-		if (!radio.up)
-			continue;
-
-		for (let iface in radio.interfaces) {
-			let config = iface.config;
-
-			if (config.mode != 'ap' || !iface.ifname)
-				continue;
-
-			let band = radio.config.band;
-			let nr_data = ubus.call('hostapd.' + iface.ifname, 'rrm_nr_get_own');
-			let nr;
-			if (nr_data && nr_data.value && nr_data.value[2])
-				nr = nr_data.value[2];
-			interfaces[iface.ifname] = {
-				band, nr,
-				ssid: config.ssid,
-			};
-
-			ssids[config.ssid] ??= {
-				interfaces: [],
-				keys: {},
-				bands: {},
-			};
-			let ssid = ssids[config.ssid];
-
-			push(ssid.interfaces, iface.ifname);
-			ssid.bands[band] = iface.ifname;
-			for (let sta in iface.stations) {
-				let stacfg = sta.config;
-
-				let key = stacfg.key;
-				if (!key)
-					continue;
-
-				let keydata = {};
-				let vid = stacfg.vid;
-				if (vid)
-					keydata.vlan = +vid;
-				let mac = stacfg.mac;
-				if (mac)
-					keydata.mac = mac;
-				ssid.keys[key] = keydata;
-			}
-		}
-	}
-	printf('New config: %.J\n',  { ssids, interfaces });
-	cache_gc();
-	create_6g_subscriber();
-}
-
-function iface_ssid(ifname) {
-	let iface = interfaces[ifname];
-	if (!iface)
-		return;
-
-	return iface.ssid;
-}
-
-function sta_cache_entry_get(ssid, addr) {
-	let ssid_cache = cache[ssid] ?? {};
-
-	let entry = ssid_cache[addr];
-	if (entry)
-		entry.timeout = time() + timeout;
-
-	printf(`Get cache entry ssid=${ssid} addr=${addr}: ${entry}\n`);
-	return entry;
-}
-
-function sta_cache_entry_add(ssid, addr, key) {
-	cache[ssid] ??= {};
-	let ssid_cache = cache[ssid];
-	let ssid_data = ssids[ssid];
-	let keydata = ssid_data.keys[key];
-
-	let cache_data = {
-		timeout: time() + timeout,
-		ssid, key,
-		data: keydata ?? {},
-	};
-	ssid_cache[addr] = cache_data;
-	printf(`Added cache entry ssid=${ssid} addr=${addr}\n`);
-	return cache_data;
-}
-
-function ssid_psk(ssid, addr) {
-	ssid = ssids[ssid];
-	if (!ssid)
-		return [];
-
-	let specific = [];
-	let rest = [];
-	for (let k, v in ssid.keys)
-		if (v.mac == addr)
-			push(specific, k);
-		else if (!v.mac)
-			push(rest, k);
-
-	if (length(specific))
-		return specific;
-
-	return rest;
-}
-
-function sta_auth_psk(ifname, addr) {
-	let ssid = iface_ssid(ifname);
-	if (!ssid)
-		return;
-
-	let cache = sta_cache_entry_get(ssid, addr);
-	if (cache)
-		return [ cache.key ];
-
-	return ssid_psk(ssid, addr);
-}
-
-function sta_auth_cache(ifname, addr, idx, phrase) {
-	let ssid = iface_ssid(ifname);
-	if (!ssid)
-		return;
-
-	let cache = sta_cache_entry_get(ssid, addr);
-	if (cache)
-		return cache.data;
-
-	let psk = ssid_psk(ssid, addr);
-	if (!psk)
-		return;
-
-	psk = psk[idx];
-	if (!psk)
-		psk = phrase;
-
-	if (!psk)
-		return;
-
-	cache = sta_cache_entry_add(ssid, addr, psk);
-	if (!cache)
-		return;
-
-	let ssid_data = ssids[ssid];
-	if (!ssid_data)
-		return cache.data;
-
-	let target_ifname = ssid_data.bands['6g'];
-	if (!target_ifname)
-		return cache.data;
-
-	let target_iface = interfaces[target_ifname];
-	if (!target_iface)
-		return cache.data;
-
-	cache.timer = uloop.timer(30 * 1000, () => {
-		let msg = {
-			addr,
-			disassociation_imminent: false,
-			neighbors: [
-				target_iface.nr
-			],
-			abridged: false,
-		};
-		printf(`ubus call hostapd.${ifname} bss_transition_request '${msg}'\n`);
-		ubus.call('hostapd.' + ifname, 'bss_transition_request', msg);
-		delete cache.timer;
-	});
-
-	return cache.data;
-}
-
-function auth_cb(msg) {
-	let data = msg.data;
-
-	printf(`Event ${msg.type}: ${msg.data}\n`);
-	switch (msg.type) {
-	case 'sta_auth':
-		return {
-			psk: sta_auth_psk(data.iface, data.sta),
-			force_psk: true,
-		};
-	case 'sta_connected':
-		if (data.psk_idx == null)
-			return;
-		return sta_auth_cache(data.iface, data.sta, data.psk_idx, data.psk);
-	case 'reload':
-		netifd_reload();
-		reload_timer.set(5000);
-		break;
-	}
-}
-
-let ubus_methods = {
-	state: {
-		call: function(req) {
-			return {
-				interfaces,
-				ssids,
-				cache
-			};
-		},
-		args: {
-		}
-	},
-};
-
-reload_timer = uloop.timer(-1, () => { netifd_reload(); });
-gc_timer = uloop.timer(1000, () => { gc_timer.set(30 * 1000); cache_gc(); });
-ubus.publish('mpsk', ubus_methods);
-let sub = ubus.subscriber(auth_cb);
-let listener = ubus.listener('ubus.object.add', (event, msg) => {
-	if (msg.path == 'hostapd-auth')
-		sub.subscribe(msg.path);
-});
-sub.subscribe('hostapd-auth');
-netifd_reload();
-uloop.run();

feeds/ipq807x_v5.4/hostapd/files/mpskd.init

@@ -1,13 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=19
-
-USE_PROCD=1
-NAME=mpskd
-
-start_service() {
-	procd_open_instance mpskd
-	procd_set_param command /usr/share/hostap/mpskd
-	procd_set_param respawn
-	procd_close_instance
-}

feeds/ipq807x_v5.4/hostapd/files/wpad_acl.json

@@ -14,6 +14,6 @@
 			"methods": [ "request" ]
 		}
 	},
-	"publish": [ "hostapd", "hostapd.*", "wpa_supplicant", "wpa_supplicant.*", "hostapd-auth" ],
+	"publish": [ "hostapd", "hostapd.*", "wpa_supplicant", "wpa_supplicant.*" ],
 	"send": [ "bss.*", "wps_credentials" ]
 }

feeds/ipq807x_v5.4/hostapd/patches/601-ucode_support.patch

@@ -585,146 +585,37 @@
  	.send_mlme = driver_nl80211_send_mlme,
  	.get_hw_feature_data = nl80211_get_hw_feature_data,
  	.sta_add = wpa_driver_nl80211_sta_add,
---- a/src/ap/ieee802_11.c
-+++ b/src/ap/ieee802_11.c
-@@ -494,11 +494,17 @@ static const char * sae_get_password(str
- 				     struct sae_pt **s_pt,
- 				     const struct sae_pk **s_pk)
- {
-+	struct hostapd_bss_config *conf = hapd->conf;
-+	struct hostapd_ssid *ssid = &conf->ssid;
-+	struct hostapd_sta_wpa_psk_short *psk;
- 	const char *password = NULL;
--	struct sae_password_entry *pw;
-+	struct sae_password_entry *pw = NULL;
- 	struct sae_pt *pt = NULL;
- 	const struct sae_pk *pk = NULL;
+--- a/src/ap/ucode.c
++++ b/src/ap/ucode.c
+@@ -255,6 +255,7 @@ uc_hostapd_bss_set_config(uc_vm_t *vm, s
  
-+	if (sta && sta->use_sta_psk)
-+		goto use_sta_psk;
-+
- 	for (pw = hapd->conf->sae_passwords; pw; pw = pw->next) {
- 		if (!is_broadcast_ether_addr(pw->peer_addr) &&
- 		    os_memcmp(pw->peer_addr, sta->addr, ETH_ALEN) != 0)
-@@ -519,6 +525,31 @@ static const char * sae_get_password(str
- 		pt = hapd->conf->ssid.pt;
+ 	hostapd_setup_bss(hapd, hapd == iface->bss[0], true);
+ 	hostapd_ucode_update_interfaces();
++	hostapd_owe_update_trans(iface);
+ 
+ done:
+ 	ret = 0;
+@@ -375,6 +376,7 @@ uc_hostapd_iface_add_bss(uc_vm_t *vm, si
+ 	conf->bss[idx] = NULL;
+ 	ret = hostapd_ucode_bss_get_uval(hapd);
+ 	hostapd_ucode_update_interfaces();
++	hostapd_owe_update_trans(iface);
+ 	goto out;
+ 
+ deinit_ctrl:
+@@ -602,6 +604,7 @@ out:
+ 
+ 		ieee802_11_set_beacon(hapd);
  	}
++	hostapd_owe_update_trans(iface);
  
-+use_sta_psk:
-+	if (!password && sta) {
-+		for (psk = sta->psk; psk; psk = psk->next) {
-+			if (!psk->is_passphrase)
-+				continue;
-+
-+			password = psk->passphrase;
-+			if (!sta->use_sta_psk)
-+				break;
-+
-+			if (sta->sae_pt) {
-+				pt = sta->sae_pt;
-+				break;
-+			}
-+
-+			pt = sae_derive_pt(conf->sae_groups, ssid->ssid,
-+					   ssid->ssid_len,
-+					   (const u8 *) password,
-+					   os_strlen(password),
-+					   NULL);
-+			sta->sae_pt = pt;
-+			break;
-+		}
-+	}
-+
- 	if (pw_entry)
- 		*pw_entry = pw;
- 	if (s_pt)
-@@ -3698,6 +3729,12 @@ static void handle_auth(struct hostapd_d
- 		goto fail;
- 	}
- 
-+	res = hostapd_ucode_sta_auth(hapd, sta);
-+	if (res) {
-+		resp = res;
-+		goto fail;
-+	}
-+
- 	sta->flags &= ~WLAN_STA_PREAUTH;
- 	ieee802_1x_notify_pre_auth(sta->eapol_sm, 0);
- 
---- a/src/ap/sta_info.c
-+++ b/src/ap/sta_info.c
-@@ -412,6 +412,9 @@ void ap_free_sta(struct hostapd_data *ha
- 	os_free(sta->sae_postponed_commit);
- #endif /* CONFIG_TESTING_OPTIONS */
- 
-+	if (sta->sae_pt)
-+		sae_deinit_pt(sta->sae_pt);
-+
- 	os_free(sta);
+ 	return ucv_boolean_new(true);
  }
+@@ -693,6 +696,7 @@ uc_hostapd_bss_rename(uc_vm_t *vm, size_
+ 	hostapd_ubus_add_bss(hapd);
  
-@@ -1280,6 +1283,8 @@ void ap_sta_set_authorized(struct hostap
- 	else
- 		sta->flags &= ~WLAN_STA_AUTHORIZED;
- 
-+	if (authorized)
-+		hostapd_ucode_sta_connected(hapd, sta);
- #ifdef CONFIG_P2P
- 	if (hapd->p2p_group == NULL) {
- 		if (sta->p2p_ie != NULL &&
---- a/src/ap/sta_info.h
-+++ b/src/ap/sta_info.h
-@@ -201,6 +201,9 @@ struct sta_info {
- 	int vlan_id_bound; /* updated by ap_sta_bind_vlan() */
- 	 /* PSKs from RADIUS authentication server */
- 	struct hostapd_sta_wpa_psk_short *psk;
-+	struct sae_pt *sae_pt;
-+	int use_sta_psk;
-+	int psk_idx;
- 
- 	char *identity; /* User-Name from RADIUS */
- 	char *radius_cui; /* Chargeable-User-Identity from RADIUS */
---- a/src/ap/wpa_auth_glue.c
-+++ b/src/ap/wpa_auth_glue.c
-@@ -337,6 +337,7 @@ static const u8 * hostapd_wpa_auth_get_p
- 	struct sta_info *sta = ap_get_sta(hapd, addr);
- 	const u8 *psk;
- 
-+	sta->psk_idx = 0;
- 	if (vlan_id)
- 		*vlan_id = 0;
- 	if (psk_len)
-@@ -381,13 +382,18 @@ static const u8 * hostapd_wpa_auth_get_p
- 	 * returned psk which should not be returned again.
- 	 * logic list (all hostapd_get_psk; all sta->psk)
- 	 */
-+	if (sta && sta->use_sta_psk)
-+		psk = NULL;
- 	if (sta && sta->psk && !psk) {
- 		struct hostapd_sta_wpa_psk_short *pos;
-+		int psk_idx;
- 
- 		if (vlan_id)
- 			*vlan_id = 0;
- 		psk = sta->psk->psk;
-+		sta->psk_idx = psk_idx = 1;
- 		for (pos = sta->psk; pos; pos = pos->next) {
-+			psk_idx++;
- 			if (pos->is_passphrase) {
- 				pbkdf2_sha1(pos->passphrase,
- 					    hapd->conf->ssid.ssid,
-@@ -396,10 +402,14 @@ static const u8 * hostapd_wpa_auth_get_p
- 				pos->is_passphrase = 0;
- 			}
- 			if (pos->psk == prev_psk) {
-+				sta->psk_idx = psk_idx;
- 				psk = pos->next ? pos->next->psk : NULL;
- 				break;
- 			}
- 		}
-+
-+		if (!psk)
-+			sta->psk_idx = 0;
- 	}
- 	return psk;
- }
+ 	hostapd_ucode_update_interfaces();
++	hostapd_owe_update_trans(hapd->iface);
+ out:
+ 	if (interfaces->ctrl_iface_init)
+ 		interfaces->ctrl_iface_init(hapd);

feeds/ipq807x_v5.4/hostapd/patches/751-wispr-ft.patch

@@ -1,552 +0,0 @@
---- a/src/ap/wpa_auth.h
-+++ b/src/ap/wpa_auth.h
-@@ -15,6 +15,10 @@
- #include "common/ieee802_11_defs.h"
- 
- struct vlan_description;
-+struct rate_description {
-+	u32 rx;
-+	u32 tx;
-+};
- 
- #define MAX_OWN_IE_OVERRIDE 256
- 
-@@ -87,6 +91,7 @@ struct ft_rrb_frame {
- #define FT_RRB_IDENTITY      15
- #define FT_RRB_RADIUS_CUI    16
- #define FT_RRB_SESSION_TIMEOUT  17 /* le32 seconds */
-+#define FT_RRB_RATE_LIMIT	18
- 
- struct ft_rrb_tlv {
- 	le16 type;
-@@ -327,6 +332,10 @@ struct wpa_auth_callbacks {
- 			struct vlan_description *vlan);
- 	int (*get_vlan)(void *ctx, const u8 *sta_addr,
- 			struct vlan_description *vlan);
-+	int (*set_rate_limit)(void *ctx, const u8 *sta_addr,
-+			      struct rate_description *rate);
-+	int (*get_rate_limit)(void *ctx, const u8 *sta_addr,
-+			      struct rate_description *rate);
- 	int (*set_identity)(void *ctx, const u8 *sta_addr,
- 			    const u8 *identity, size_t identity_len);
- 	size_t (*get_identity)(void *ctx, const u8 *sta_addr, const u8 **buf);
-@@ -479,7 +488,7 @@ int wpa_ft_fetch_pmk_r1(struct wpa_authe
- 			struct vlan_description *vlan,
- 			const u8 **identity, size_t *identity_len,
- 			const u8 **radius_cui, size_t *radius_cui_len,
--			int *session_timeout);
-+			int *session_timeout, struct rate_description *rate);
- 
- #endif /* CONFIG_IEEE80211R_AP */
- 
---- a/src/ap/wpa_auth_glue.c
-+++ b/src/ap/wpa_auth_glue.c
-@@ -1172,6 +1172,40 @@ static int hostapd_wpa_auth_get_vlan(voi
- }
- 
- 
-+static int hostapd_wpa_auth_set_rate_limit(void *ctx, const u8 *sta_addr,
-+					   struct rate_description *rate)
-+{
-+	struct hostapd_data *hapd = ctx;
-+	struct sta_info *sta;
-+
-+	sta = ap_get_sta(hapd, sta_addr);
-+	if (!sta || !sta->wpa_sm)
-+		return -1;
-+
-+	memcpy(sta->bandwidth, rate, sizeof(*rate));
-+	hostapd_logger(hapd, sta->addr, HOSTAPD_MODULE_IEEE80211,
-+		       HOSTAPD_LEVEL_INFO, "rate-limit %d %d", sta->bandwidth[0], sta->bandwidth[1]);
-+
-+	return 0;
-+}
-+
-+
-+static int hostapd_wpa_auth_get_rate_limit(void *ctx, const u8 *sta_addr,
-+					   struct rate_description *rate)
-+{
-+	struct hostapd_data *hapd = ctx;
-+	struct sta_info *sta;
-+
-+	sta = ap_get_sta(hapd, sta_addr);
-+	if (!sta)
-+		return -1;
-+
-+	memcpy(rate, sta->bandwidth, sizeof(*rate));
-+
-+	return 0;
-+}
-+
-+
- static int
- hostapd_wpa_auth_set_identity(void *ctx, const u8 *sta_addr,
- 			      const u8 *identity, size_t identity_len)
-@@ -1490,6 +1524,8 @@ int hostapd_setup_wpa(struct hostapd_dat
- 		.add_tspec = hostapd_wpa_auth_add_tspec,
- 		.set_vlan = hostapd_wpa_auth_set_vlan,
- 		.get_vlan = hostapd_wpa_auth_get_vlan,
-+		.set_rate_limit = hostapd_wpa_auth_set_rate_limit,
-+		.get_rate_limit = hostapd_wpa_auth_get_rate_limit,
- 		.set_identity = hostapd_wpa_auth_set_identity,
- 		.get_identity = hostapd_wpa_auth_get_identity,
- 		.set_radius_cui = hostapd_wpa_auth_set_radius_cui,
---- a/src/ap/ieee802_11.c
-+++ b/src/ap/ieee802_11.c
-@@ -3215,7 +3215,7 @@ static void handle_auth_pasn_1(struct ho
- 						  rsn_data.pmkid,
- 						  pmk_r1, &pmk_r1_len, NULL,
- 						  NULL, NULL, NULL,
--						  NULL, NULL, NULL);
-+						  NULL, NULL, NULL, NULL);
- 			if (ret) {
- 				wpa_printf(MSG_DEBUG,
- 					   "PASN: FT: Failed getting PMK-R1");
---- a/src/ap/wpa_auth_ft.c
-+++ b/src/ap/wpa_auth_ft.c
-@@ -375,6 +375,14 @@ static size_t wpa_ft_vlan_len(const stru
- 	return tlv_len;
- }
- 
-+static size_t wpa_ft_rate_limit_len(const struct rate_description *rate)
-+{
-+	if (!rate || (!rate->rx && !rate->tx))
-+		return 0;
-+
-+	return (sizeof(struct ft_rrb_tlv) + 8);
-+}
-+
- 
- static size_t wpa_ft_vlan_lin(const struct vlan_description *vlan,
- 			      u8 *start, u8 *endpos)
-@@ -430,10 +438,48 @@ static size_t wpa_ft_vlan_lin(const stru
- }
- 
- 
-+static size_t wpa_ft_rate_limit_lin(const struct rate_description *rate,
-+				    u8 *start, u8 *endpos)
-+{
-+	size_t tlv_len;
-+	int i, len;
-+	struct ft_rrb_tlv *hdr;
-+	u8 *pos = start;
-+
-+	if (!rate)
-+		return 0;
-+
-+	tlv_len = 0;
-+	if (rate->rx || rate->tx) {
-+		tlv_len += sizeof(*hdr);
-+		if (start + tlv_len > endpos)
-+			return tlv_len;
-+		hdr = (struct ft_rrb_tlv *) pos;
-+		hdr->type = host_to_le16(FT_RRB_RATE_LIMIT);
-+		hdr->len = host_to_le16(2 * sizeof(le32));
-+		pos = start + tlv_len;
-+
-+		tlv_len += sizeof(u32);
-+		if (start + tlv_len > endpos)
-+			return tlv_len;
-+		WPA_PUT_LE32(pos, rate->rx);
-+		pos = start + tlv_len;
-+		tlv_len += sizeof(u32);
-+		if (start + tlv_len > endpos)
-+			return tlv_len;
-+		WPA_PUT_LE32(pos, rate->tx);
-+		pos = start + tlv_len;
-+	}
-+
-+	return tlv_len;
-+}
-+
-+
- static int wpa_ft_rrb_lin(const struct tlv_list *tlvs1,
- 			  const struct tlv_list *tlvs2,
- 			  const struct vlan_description *vlan,
--			  u8 **plain, size_t *plain_len)
-+			  u8 **plain, size_t *plain_len,
-+			  const struct rate_description *rate)
- {
- 	u8 *pos, *endpos;
- 	size_t tlv_len;
-@@ -441,6 +487,7 @@ static int wpa_ft_rrb_lin(const struct t
- 	tlv_len = wpa_ft_tlv_len(tlvs1);
- 	tlv_len += wpa_ft_tlv_len(tlvs2);
- 	tlv_len += wpa_ft_vlan_len(vlan);
-+	tlv_len += wpa_ft_rate_limit_len(rate);
- 
- 	*plain_len = tlv_len;
- 	*plain = os_zalloc(tlv_len);
-@@ -454,6 +501,7 @@ static int wpa_ft_rrb_lin(const struct t
- 	pos += wpa_ft_tlv_lin(tlvs1, pos, endpos);
- 	pos += wpa_ft_tlv_lin(tlvs2, pos, endpos);
- 	pos += wpa_ft_vlan_lin(vlan, pos, endpos);
-+	pos += wpa_ft_rate_limit_lin(rate, pos, endpos);
- 
- 	/* sanity check */
- 	if (pos != endpos) {
-@@ -522,7 +570,8 @@ static int wpa_ft_rrb_build(const u8 *ke
- 			    const struct tlv_list *tlvs_auth,
- 			    const struct vlan_description *vlan,
- 			    const u8 *src_addr, u8 type,
--			    u8 **packet, size_t *packet_len)
-+			    u8 **packet, size_t *packet_len,
-+			    const struct rate_description *rate)
- {
- 	u8 *plain = NULL, *auth = NULL, *pos, *tmp;
- 	size_t plain_len = 0, auth_len = 0;
-@@ -530,10 +579,10 @@ static int wpa_ft_rrb_build(const u8 *ke
- 	size_t pad_len = 0;
- 
- 	*packet = NULL;
--	if (wpa_ft_rrb_lin(tlvs_enc0, tlvs_enc1, vlan, &plain, &plain_len) < 0)
-+	if (wpa_ft_rrb_lin(tlvs_enc0, tlvs_enc1, vlan, &plain, &plain_len, rate) < 0)
- 		goto out;
- 
--	if (wpa_ft_rrb_lin(tlvs_auth, NULL, NULL, &auth, &auth_len) < 0)
-+	if (wpa_ft_rrb_lin(tlvs_auth, NULL, NULL, &auth, &auth_len, NULL) < 0)
- 		goto out;
- 
- 	*packet_len = sizeof(u16) + auth_len + plain_len;
-@@ -696,6 +745,24 @@ static int wpa_ft_get_vlan(struct wpa_au
- }
- 
- 
-+static int wpa_ft_get_rate_limit(struct wpa_authenticator *wpa_auth,
-+				 const u8 *sta_addr, struct rate_description *rate)
-+{
-+	if (!wpa_auth->cb->get_rate_limit)
-+		return -1;
-+	return wpa_auth->cb->get_rate_limit(wpa_auth->cb_ctx, sta_addr, rate);
-+}
-+
-+
-+static int wpa_ft_set_rate_limit(struct wpa_authenticator *wpa_auth,
-+				 const u8 *sta_addr, struct rate_description *rate)
-+{
-+	if (!wpa_auth->cb->set_rate_limit)
-+		return -1;
-+	return wpa_auth->cb->set_rate_limit(wpa_auth->cb_ctx, sta_addr, rate);
-+}
-+
-+
- static int
- wpa_ft_set_identity(struct wpa_authenticator *wpa_auth, const u8 *sta_addr,
- 		    const u8 *identity, size_t identity_len)
-@@ -991,7 +1058,7 @@ wpa_ft_rrb_seq_req(struct wpa_authentica
- 
- 	if (wpa_ft_rrb_build(key, key_len, NULL, NULL, seq_req_auth, NULL,
- 			     wpa_auth->addr, FT_PACKET_R0KH_R1KH_SEQ_REQ,
--			     &packet, &packet_len) < 0) {
-+			     &packet, &packet_len, NULL) < 0) {
- 		item = NULL; /* some other seq resp might still accept this */
- 		goto err;
- 	}
-@@ -1174,6 +1241,7 @@ struct wpa_ft_pmk_r0_sa {
- 	u8 spa[ETH_ALEN];
- 	int pairwise; /* Pairwise cipher suite, WPA_CIPHER_* */
- 	struct vlan_description *vlan;
-+	struct rate_description *rate;
- 	os_time_t expiration; /* 0 for no expiration */
- 	u8 *identity;
- 	size_t identity_len;
-@@ -1192,6 +1260,7 @@ struct wpa_ft_pmk_r1_sa {
- 	u8 spa[ETH_ALEN];
- 	int pairwise; /* Pairwise cipher suite, WPA_CIPHER_* */
- 	struct vlan_description *vlan;
-+	struct rate_description *rate;
- 	u8 *identity;
- 	size_t identity_len;
- 	u8 *radius_cui;
-@@ -1220,6 +1289,7 @@ static void wpa_ft_free_pmk_r0(struct wp
- 
- 	os_memset(r0->pmk_r0, 0, PMK_LEN_MAX);
- 	os_free(r0->vlan);
-+	os_free(r0->rate);
- 	os_free(r0->identity);
- 	os_free(r0->radius_cui);
- 	os_free(r0);
-@@ -1273,6 +1343,7 @@ static void wpa_ft_free_pmk_r1(struct wp
- 	eloop_cancel_timeout(wpa_ft_expire_pmk_r1, r1, NULL);
- 
- 	os_memset(r1->pmk_r1, 0, PMK_LEN_MAX);
-+	os_free(r1->rate);
- 	os_free(r1->vlan);
- 	os_free(r1->identity);
- 	os_free(r1->radius_cui);
-@@ -1326,7 +1397,8 @@ static int wpa_ft_store_pmk_r0(struct wp
- 			       const struct vlan_description *vlan,
- 			       int expires_in, int session_timeout,
- 			       const u8 *identity, size_t identity_len,
--			       const u8 *radius_cui, size_t radius_cui_len)
-+			       const u8 *radius_cui, size_t radius_cui_len,
-+			       struct rate_description *rate)
- {
- 	struct wpa_ft_pmk_cache *cache = wpa_auth->ft_pmk_cache;
- 	struct wpa_ft_pmk_r0_sa *r0;
-@@ -1354,6 +1426,14 @@ static int wpa_ft_store_pmk_r0(struct wp
- 		}
- 		*r0->vlan = *vlan;
- 	}
-+	if (rate) {
-+		r0->rate = os_zalloc(sizeof(*rate));
-+		if (!r0->rate) {
-+			bin_clear_free(r0, sizeof(*r0));
-+			return -1;
-+		}
-+		*r0->rate = *rate;
-+	}
- 	if (identity) {
- 		r0->identity = os_malloc(identity_len);
- 		if (r0->identity) {
-@@ -1413,7 +1493,8 @@ static int wpa_ft_store_pmk_r1(struct wp
- 			       const struct vlan_description *vlan,
- 			       int expires_in, int session_timeout,
- 			       const u8 *identity, size_t identity_len,
--			       const u8 *radius_cui, size_t radius_cui_len)
-+			       const u8 *radius_cui, size_t radius_cui_len,
-+			       struct rate_description *rate)
- {
- 	struct wpa_ft_pmk_cache *cache = wpa_auth->ft_pmk_cache;
- 	int max_expires_in = wpa_auth->conf.r1_max_key_lifetime;
-@@ -1443,6 +1524,14 @@ static int wpa_ft_store_pmk_r1(struct wp
- 		}
- 		*r1->vlan = *vlan;
- 	}
-+	if (rate) {
-+		r1->rate = os_zalloc(sizeof(*rate));
-+		if (!r1->rate) {
-+			bin_clear_free(r1, sizeof(*r1));
-+			return -1;
-+		}
-+		*r1->rate = *rate;
-+	}
- 	if (identity) {
- 		r1->identity = os_malloc(identity_len);
- 		if (r1->identity) {
-@@ -1479,7 +1568,7 @@ int wpa_ft_fetch_pmk_r1(struct wpa_authe
- 			struct vlan_description *vlan,
- 			const u8 **identity, size_t *identity_len,
- 			const u8 **radius_cui, size_t *radius_cui_len,
--			int *session_timeout)
-+			int *session_timeout, struct rate_description *rate)
- {
- 	struct wpa_ft_pmk_cache *cache = wpa_auth->ft_pmk_cache;
- 	struct wpa_ft_pmk_r1_sa *r1;
-@@ -1499,6 +1588,12 @@ int wpa_ft_fetch_pmk_r1(struct wpa_authe
- 				*vlan = *r1->vlan;
- 			if (vlan && !r1->vlan)
- 				os_memset(vlan, 0, sizeof(*vlan));
-+			if (rate) {
-+				if (r1->rate)
-+					*rate = *r1->rate;
-+				else
-+					memset(rate, 0, sizeof(*rate));
-+			}
- 			if (identity && identity_len) {
- 				*identity = r1->identity;
- 				*identity_len = r1->identity_len;
-@@ -2025,7 +2120,7 @@ static int wpa_ft_pull_pmk_r1(struct wpa
- 
- 	if (wpa_ft_rrb_build(key, key_len, req_enc, NULL, req_auth, NULL,
- 			     sm->wpa_auth->addr, FT_PACKET_R0KH_R1KH_PULL,
--			     &packet, &packet_len) < 0)
-+			     &packet, &packet_len, NULL) < 0)
- 		return -1;
- 
- 	ft_pending_req_ies = wpabuf_alloc_copy(ies, ies_len);
-@@ -2054,6 +2149,7 @@ int wpa_ft_store_pmk_fils(struct wpa_sta
- {
- 	int expires_in = sm->wpa_auth->conf.r0_key_lifetime;
- 	struct vlan_description vlan;
-+	struct rate_description rate;
- 	const u8 *identity, *radius_cui;
- 	size_t identity_len, radius_cui_len;
- 	int session_timeout;
-@@ -2065,6 +2161,7 @@ int wpa_ft_store_pmk_fils(struct wpa_sta
- 			   MAC2STR(sm->addr));
- 		return -1;
- 	}
-+	wpa_ft_get_rate_limit(sm->wpa_auth, sm->addr, &rate);
- 
- 	identity_len = wpa_ft_get_identity(sm->wpa_auth, sm->addr, &identity);
- 	radius_cui_len = wpa_ft_get_radius_cui(sm->wpa_auth, sm->addr,
-@@ -2074,7 +2171,7 @@ int wpa_ft_store_pmk_fils(struct wpa_sta
- 	return wpa_ft_store_pmk_r0(sm->wpa_auth, sm->addr, pmk_r0, pmk_r0_len,
- 				   pmk_r0_name, sm->pairwise, &vlan, expires_in,
- 				   session_timeout, identity, identity_len,
--				   radius_cui, radius_cui_len);
-+				   radius_cui, radius_cui_len, &rate);
- }
- 
- 
-@@ -2095,6 +2192,7 @@ int wpa_auth_derive_ptk_ft(struct wpa_st
- 	int psk_local = sm->wpa_auth->conf.ft_psk_generate_local;
- 	int expires_in = sm->wpa_auth->conf.r0_key_lifetime;
- 	struct vlan_description vlan;
-+	struct rate_description rate;
- 	const u8 *identity, *radius_cui;
- 	size_t identity_len, radius_cui_len;
- 	int session_timeout;
-@@ -2119,6 +2217,8 @@ int wpa_auth_derive_ptk_ft(struct wpa_st
- 		return -1;
- 	}
- 
-+	wpa_ft_get_rate_limit(sm->wpa_auth, sm->addr, &rate);
-+
- 	identity_len = wpa_ft_get_identity(sm->wpa_auth, sm->addr, &identity);
- 	radius_cui_len = wpa_ft_get_radius_cui(sm->wpa_auth, sm->addr,
- 					       &radius_cui);
-@@ -2134,7 +2234,7 @@ int wpa_auth_derive_ptk_ft(struct wpa_st
- 				    pmk_r0_name,
- 				    sm->pairwise, &vlan, expires_in,
- 				    session_timeout, identity, identity_len,
--				    radius_cui, radius_cui_len);
-+				    radius_cui, radius_cui_len, &rate);
- 
- 	if (wpa_derive_pmk_r1(pmk_r0, pmk_r0_len, pmk_r0_name, r1kh, sm->addr,
- 			      pmk_r1, sm->pmk_r1_name) < 0)
-@@ -2143,7 +2243,8 @@ int wpa_auth_derive_ptk_ft(struct wpa_st
- 		wpa_ft_store_pmk_r1(sm->wpa_auth, sm->addr, pmk_r1, pmk_r1_len,
- 				    sm->pmk_r1_name, sm->pairwise, &vlan,
- 				    expires_in, session_timeout, identity,
--				    identity_len, radius_cui, radius_cui_len);
-+				    identity_len, radius_cui, radius_cui_len,
-+				    &rate);
- 
- 	return wpa_pmk_r1_to_ptk(pmk_r1, pmk_r1_len, sm->SNonce, sm->ANonce,
- 				 sm->addr, sm->wpa_auth->addr, sm->pmk_r1_name,
-@@ -2986,7 +3087,8 @@ static int wpa_ft_local_derive_pmk_r1(st
- 				      const u8 **identity, size_t *identity_len,
- 				      const u8 **radius_cui,
- 				      size_t *radius_cui_len,
--				      int *out_session_timeout)
-+				      int *out_session_timeout,
-+				      struct rate_description *rate)
- {
- 	struct wpa_auth_config *conf = &wpa_auth->conf;
- 	const struct wpa_ft_pmk_r0_sa *r0;
-@@ -3023,7 +3125,8 @@ static int wpa_ft_local_derive_pmk_r1(st
- 			    pmk_r1_name,
- 			    sm->pairwise, r0->vlan, expires_in, session_timeout,
- 			    r0->identity, r0->identity_len,
--			    r0->radius_cui, r0->radius_cui_len);
-+			    r0->radius_cui, r0->radius_cui_len,
-+			    r0->rate);
- 
- 	*out_pairwise = sm->pairwise;
- 	if (vlan) {
-@@ -3033,6 +3136,13 @@ static int wpa_ft_local_derive_pmk_r1(st
- 			os_memset(vlan, 0, sizeof(*vlan));
- 	}
- 
-+	if (rate) {
-+		if (r0->rate)
-+			*rate = *r0->rate;
-+		else
-+			os_memset(rate, 0, sizeof(*rate));
-+	}
-+
- 	if (identity && identity_len) {
- 		*identity = r0->identity;
- 		*identity_len = r0->identity_len;
-@@ -3063,6 +3173,7 @@ static int wpa_ft_process_auth_req(struc
- 	u8 *pos, *end;
- 	int pairwise, session_timeout = 0;
- 	struct vlan_description vlan;
-+	struct rate_description rate = {};
- 	const u8 *identity, *radius_cui;
- 	size_t identity_len = 0, radius_cui_len = 0;
- 	int use_sha384;
-@@ -3152,7 +3263,7 @@ static int wpa_ft_process_auth_req(struc
- 	} else if (wpa_ft_fetch_pmk_r1(sm->wpa_auth, sm->addr, pmk_r1_name,
- 				       pmk_r1, &pmk_r1_len, &pairwise, &vlan,
- 				       &identity, &identity_len, &radius_cui,
--				       &radius_cui_len, &session_timeout) < 0) {
-+				       &radius_cui_len, &session_timeout, &rate) < 0) {
- 		wpa_printf(MSG_DEBUG,
- 			   "FT: No PMK-R1 available in local cache for the requested PMKR1Name");
- 		if (wpa_ft_local_derive_pmk_r1(sm->wpa_auth, sm,
-@@ -3161,7 +3272,7 @@ static int wpa_ft_process_auth_req(struc
- 					       pmk_r1_name, pmk_r1, &pairwise,
- 					       &vlan, &identity, &identity_len,
- 					       &radius_cui, &radius_cui_len,
--					       &session_timeout) == 0) {
-+					       &session_timeout, &rate) == 0) {
- 			wpa_printf(MSG_DEBUG,
- 				   "FT: Generated PMK-R1 based on local PMK-R0");
- 			goto pmk_r1_derived;
-@@ -3219,6 +3330,7 @@ pmk_r1_derived:
- 		wpa_printf(MSG_DEBUG, "FT: Failed to configure VLAN");
- 		return WLAN_STATUS_UNSPECIFIED_FAILURE;
- 	}
-+	wpa_ft_set_rate_limit(sm->wpa_auth, sm->addr, &rate);
- 	if (wpa_ft_set_identity(sm->wpa_auth, sm->addr,
- 				identity, identity_len) < 0 ||
- 	    wpa_ft_set_radius_cui(sm->wpa_auth, sm->addr,
-@@ -3791,7 +3903,7 @@ static int wpa_ft_rrb_build_r0(const u8
- 
- 	ret = wpa_ft_rrb_build(key, key_len, tlvs, sess_tlv, tlv_auth,
- 			       pmk_r0->vlan, src_addr, type,
--			       packet, packet_len);
-+			       packet, packet_len, pmk_r0->rate);
- 
- 	forced_memzero(pmk_r1, sizeof(pmk_r1));
- 
-@@ -3931,7 +4043,7 @@ static int wpa_ft_rrb_rx_pull(struct wpa
- 		ret = wpa_ft_rrb_build(key, key_len, resp, NULL, resp_auth,
- 				       NULL, wpa_auth->addr,
- 				       FT_PACKET_R0KH_R1KH_RESP,
--				       &packet, &packet_len);
-+				       &packet, &packet_len, NULL);
- 	} else {
- 		ret = wpa_ft_rrb_build_r0(key, key_len, resp, r0, f_r1kh_id,
- 					  f_s1kh_id, resp_auth, wpa_auth->addr,
-@@ -3983,11 +4095,15 @@ static int wpa_ft_rrb_rx_r1(struct wpa_a
- 	size_t f_expires_in_len;
- 	size_t f_identity_len, f_radius_cui_len;
- 	size_t f_session_timeout_len;
-+	size_t f_rate_len;
-+	const u8 *f_rate;
- 	int pairwise;
- 	int ret = -1;
- 	int expires_in;
- 	int session_timeout;
- 	struct vlan_description vlan;
-+	struct rate_description rate;
-+	int has_rate = 0;
- 	size_t pmk_r1_len;
- 
- 	RRB_GET_AUTH(FT_RRB_R0KH_ID, r0kh_id, msgtype, -1);
-@@ -4096,6 +4212,13 @@ static int wpa_ft_rrb_rx_r1(struct wpa_a
- 	wpa_printf(MSG_DEBUG, "FT: vlan %d%s",
- 		   le_to_host16(vlan.untagged), vlan.tagged[0] ? "+" : "");
- 
-+	RRB_GET_OPTIONAL(FT_RRB_RATE_LIMIT, rate, msgtype, 2 * sizeof(le32));
-+	if (f_rate) {
-+		memcpy(&rate, f_rate, sizeof(rate));
-+		rate.rx = le_to_host32(rate.rx);
-+		rate.tx = le_to_host32(rate.tx);
-+		has_rate = 1;
-+	};
- 	RRB_GET_OPTIONAL(FT_RRB_IDENTITY, identity, msgtype, -1);
- 	if (f_identity)
- 		wpa_hexdump_ascii(MSG_DEBUG, "FT: Identity", f_identity,
-@@ -4118,7 +4241,7 @@ static int wpa_ft_rrb_rx_r1(struct wpa_a
- 				f_pmk_r1_name,
- 				pairwise, &vlan, expires_in, session_timeout,
- 				f_identity, f_identity_len, f_radius_cui,
--				f_radius_cui_len) < 0)
-+				f_radius_cui_len, has_rate ? &rate : 0) < 0)
- 		goto out;
- 
- 	ret = 0;
-@@ -4431,7 +4554,7 @@ static int wpa_ft_rrb_rx_seq_req(struct
- 
- 	if (wpa_ft_rrb_build(key, key_len, NULL, NULL, seq_resp_auth, NULL,
- 			     wpa_auth->addr, FT_PACKET_R0KH_R1KH_SEQ_RESP,
--			     &packet, &packet_len) < 0)
-+			     &packet, &packet_len, NULL) < 0)
- 		goto out;
- 
- 	wpa_ft_rrb_oui_send(wpa_auth, src_addr,

feeds/ipq807x_v5.4/hostapd/patches/999-re-assoc-event.patch

@@ -1,147 +0,0 @@
---- a/src/ap/ieee802_11.c
-+++ b/src/ap/ieee802_11.c
-@@ -469,6 +469,7 @@ static void handle_auth_ft_finish(void *
- 
- 	hostapd_logger(hapd, dst, HOSTAPD_MODULE_IEEE80211,
- 		       HOSTAPD_LEVEL_DEBUG, "authentication OK (FT)");
-+	hostapd_ubus_notify(hapd, "ft-finish", sta->addr);
- 	sta->flags |= WLAN_STA_AUTH;
- 	mlme_authenticate_indication(hapd, sta);
- }
-@@ -5435,6 +5436,8 @@ static void handle_assoc(struct hostapd_
- 	}
- 
- 	sta = ap_get_sta(hapd, mgmt->sa);
-+	if (sta && reassoc)
-+		memcpy(sta->origin_ap, mgmt->u.reassoc_req.current_ap, 6);
- #ifdef CONFIG_IEEE80211R_AP
- 	if (sta && sta->auth_alg == WLAN_AUTH_FT &&
- 	    (sta->flags & WLAN_STA_AUTH) == 0) {
-@@ -5588,6 +5591,7 @@ static void handle_assoc(struct hostapd_
- 		.type = HOSTAPD_UBUS_ASSOC_REQ,
- 		.mgmt_frame = mgmt,
- 		.ssi_signal = rssi,
-+		.reassoc = reassoc,
- 	};
- 
- 	/* followed by SSID and Supported rates; and HT capabilities if 802.11n
-@@ -6414,7 +6418,7 @@ static void handle_assoc_cb(struct hosta
- 		 * Open, static WEP, FT protocol, or FILS; no separate
- 		 * authorization step.
- 		 */
--		ap_sta_set_authorized(hapd, sta, 1);
-+		_ap_sta_set_authorized(hapd, sta, 1, reassoc);
- 	}
- 
- 	if (reassoc)
---- a/src/ap/ubus.c
-+++ b/src/ap/ubus.c
-@@ -1870,6 +1870,8 @@ int hostapd_ubus_handle_event(struct hos
- 	if (req->ssi_signal)
- 		blobmsg_add_u32(&b, "signal", req->ssi_signal);
- 	blobmsg_add_u32(&b, "freq", hapd->iface->freq);
-+	if (req->reassoc && req->mgmt_frame)
-+		blobmsg_add_macaddr(&b, "origin", req->mgmt_frame->u.reassoc_req.current_ap);
- 
- 	if (req->elems) {
- 		if(req->elems->ht_capabilities)
-@@ -1940,6 +1942,7 @@ void hostapd_ubus_notify(struct hostapd_
- 	blob_buf_init(&b, 0);
- 	blobmsg_add_macaddr(&b, "address", addr);
- 	blobmsg_add_string(&b, "ifname", hapd->conf->iface);
-+	blobmsg_printf(&b, "target", MACSTR, MAC2STR(hapd->conf->bssid));
- 
- 	ubus_notify(ctx, &hapd->ubus.obj, type, b.head, -1);
- }
-@@ -1958,7 +1961,7 @@ void hostapd_ubus_notify_csa(struct host
- }
- 
- 
--void hostapd_ubus_notify_authorized(struct hostapd_data *hapd, struct sta_info *sta)
-+void hostapd_ubus_notify_authorized(struct hostapd_data *hapd, struct sta_info *sta, int reassoc)
- {
- 	if (!hapd->ubus.obj.has_subscribers)
- 		return;
-@@ -1975,6 +1978,9 @@ void hostapd_ubus_notify_authorized(stru
- 		blobmsg_add_u32(&b, "", sta->bandwidth[1]);
- 		blobmsg_close_array(&b, r);
- 	}
-+	if (reassoc)
-+		blobmsg_add_macaddr(&b, "origin", sta->origin_ap);
-+	blobmsg_printf(&b, "target", MACSTR, MAC2STR(hapd->conf->bssid));
- 
- 	ubus_notify(ctx, &hapd->ubus.obj, "sta-authorized", b.head, -1);
- }
---- a/src/ap/ubus.h
-+++ b/src/ap/ubus.h
-@@ -22,6 +22,7 @@ struct hostapd_ubus_request {
- 	const struct ieee802_11_elems *elems;
- 	int ssi_signal; /* dBm */
- 	const u8 *addr;
-+	int reassoc;
- };
- 
- struct hostapd_iface;
-@@ -49,7 +50,7 @@ void hostapd_ubus_remove_vlan(struct hos
- 
- int hostapd_ubus_handle_event(struct hostapd_data *hapd, struct hostapd_ubus_request *req);
- void hostapd_ubus_notify(struct hostapd_data *hapd, const char *type, const u8 *mac);
--void hostapd_ubus_notify_authorized(struct hostapd_data *hapd, struct sta_info *sta);
-+void hostapd_ubus_notify_authorized(struct hostapd_data *hapd, struct sta_info *sta, int reassoc);
- void hostapd_ubus_notify_beacon_report(struct hostapd_data *hapd,
- 				       const u8 *addr, u8 token, u8 rep_mode,
- 				       struct rrm_measurement_beacon_report *rep,
---- a/src/ap/sta_info.c
-+++ b/src/ap/sta_info.c
-@@ -1265,8 +1265,8 @@ const char * ap_sta_wpa_get_keyid(struct
- }
- 
- 
--void ap_sta_set_authorized(struct hostapd_data *hapd, struct sta_info *sta,
--			   int authorized)
-+void _ap_sta_set_authorized(struct hostapd_data *hapd, struct sta_info *sta,
-+			    int authorized, int reassoc)
- {
- 	const u8 *dev_addr = NULL;
- 	char buf[100];
-@@ -1346,7 +1346,7 @@ void ap_sta_set_authorized(struct hostap
- 				    " keyid=%s", keyid);
- 		}
- 
--		hostapd_ubus_notify_authorized(hapd, sta);
-+		hostapd_ubus_notify_authorized(hapd, sta, reassoc);
- 		wpa_msg(hapd->msg_ctx, MSG_INFO, AP_STA_CONNECTED "%s%s%s%s",
- 			buf, ip_addr, keyid_buf, alg_buf);
- 
-@@ -1375,6 +1375,11 @@ void ap_sta_set_authorized(struct hostap
- 	}
- #endif /* CONFIG_FST */
- }
-+void ap_sta_set_authorized(struct hostapd_data *hapd, struct sta_info *sta,
-+			   int authorized)
-+{
-+	_ap_sta_set_authorized(hapd, sta, authorized, 0);
-+}
- 
- 
- void ap_sta_disconnect(struct hostapd_data *hapd, struct sta_info *sta,
---- a/src/ap/sta_info.h
-+++ b/src/ap/sta_info.h
-@@ -106,6 +106,7 @@ struct sta_info {
- 	struct sta_info *next; /* next entry in sta list */
- 	struct sta_info *hnext; /* next entry in hash table list */
- 	u8 addr[6];
-+	u8 origin_ap[6];
- 	be32 ipaddr;
- 	struct dl_list ip6addr; /* list head for struct ip6addr */
- 	u16 aid; /* STA's unique AID (1 .. 2007) or 0 if not yet assigned */
-@@ -392,6 +393,9 @@ const char * ap_sta_wpa_get_keyid(struct
- void ap_sta_disconnect(struct hostapd_data *hapd, struct sta_info *sta,
- 		       const u8 *addr, u16 reason);
- 
-+void _ap_sta_set_authorized(struct hostapd_data *hapd,
-+			    struct sta_info *sta, int authorized,
-+			    int reassoc);
- void ap_sta_set_authorized(struct hostapd_data *hapd,
- 			   struct sta_info *sta, int authorized);
- static inline int ap_sta_is_authorized(struct sta_info *sta)

feeds/ipq807x_v5.4/hostapd/patches/t00-012-hostapd-Fix-DVLAN-802.1x-issue.patch

@@ -1,53 +0,0 @@
-From 98b6503b87bb36bf2f5ae16e52e230e8870c867f Mon Sep 17 00:00:00 2001
-From: Venkat Chimata <venkata@shasta.cloud>
-Date: Fri, 28 Jun 2024 14:39:31 +0530
-Subject: [PATCH] hostapd: Fix DVLAN + 802.1x issue
-
-In case of swconfig switches, the basename of the interface should be based on the last dot.
-Earlier it was done based on the first dot, which would result in incorrect basename.
-For example if the interface name is eth0.4087 then the vlan->ifname would be eth0.4087.  (A dot at the end) .
-Before this patch, the basename was returned as eth0. It should be eth0.4087
-
-Also fixed the return code by adding a default value of 0 and removed an unncessary check
-for if_add before ubus add call.
-
-Signed-off-by: Venkat Chimata <venkata@shasta.cloud>
----
- src/ap/vlan_init.c | 7 ++++---
- 1 file changed, 4 insertions(+), 3 deletions(-)
-
-diff --git a/src/ap/vlan_init.c b/src/ap/vlan_init.c
-index 3e27671..cfeb1e5 100644
---- a/src/ap/vlan_init.c
-+++ b/src/ap/vlan_init.c
-@@ -23,7 +23,8 @@ static int vlan_if_add(struct hostapd_data *hapd, struct hostapd_vlan *vlan,
- 		       int existsok)
- {
- 	bool vlan_exists = iface_exists(vlan->ifname);
--	int ret;
-+	int ret = 0;
-+
- #ifdef CONFIG_WEP
- 	int i;
- 
-@@ -38,7 +39,7 @@ static int vlan_if_add(struct hostapd_data *hapd, struct hostapd_vlan *vlan,
- #endif /* CONFIG_WEP */
- 
- 	if (!hapd->driver || !hapd->driver->if_add) {
--		char *dot = strstr(vlan->ifname, ".");
-+		char *dot = strrchr(vlan->ifname, '.');
- 		if (dot)
- 			*dot = '\0';
- 		ret = 0;
-@@ -59,7 +60,7 @@ static int vlan_if_add(struct hostapd_data *hapd, struct hostapd_vlan *vlan,
- 	if (hapd->wpa_auth)
- 		ret = wpa_auth_ensure_group(hapd->wpa_auth, vlan->vlan_id);
- 
--	if (!ret && !vlan_exists && hapd->driver->if_add)
-+	if (!ret && !vlan_exists)
- 		hostapd_ubus_add_vlan(hapd, vlan);
- 
- 	if (ret == 0)
--- 
-2.34.1
-

feeds/ipq807x_v5.4/hostapd/patches/zzz-deny-6g-probe-resp.patch

@@ -1,156 +0,0 @@
---- a/src/ap/ieee802_11.c
-+++ b/src/ap/ieee802_11.c
-@@ -7740,7 +7740,7 @@ enum colocation_mode get_colocation_mode
- }
- 
- 
--size_t hostapd_eid_rnr_len(struct hostapd_data *hapd, u32 type)
-+size_t _hostapd_eid_rnr_len(struct hostapd_data *hapd, u32 type, int add_6g)
- {
- 	size_t len = 0, current_len = 0;
- 	enum colocation_mode mode = get_colocation_mode(hapd);
-@@ -7753,7 +7753,7 @@ size_t hostapd_eid_rnr_len(struct hostap
- 		/* fallthrough */
- 
- 	case WLAN_FC_STYPE_PROBE_RESP:
--		if (mode == COLOCATED_LOWER_BAND)
-+		if (add_6g && mode == COLOCATED_LOWER_BAND)
- 			len += hostapd_eid_rnr_colocation_len(hapd,
- 							      &current_len);
- 
-@@ -7776,6 +7776,10 @@ size_t hostapd_eid_rnr_len(struct hostap
- 	return len;
- }
- 
-+size_t hostapd_eid_rnr_len(struct hostapd_data *hapd, u32 type)
-+{
-+	return _hostapd_eid_rnr_len(hapd, type, 1);
-+}
- 
- static u8 *hostapd_eid_rnr_iface(struct hostapd_data *hapd,
- 				 struct hostapd_data *reporting_hapd,
-@@ -7938,7 +7942,7 @@ static u8 *hostapd_eid_neighbor_report_d
- }
- 
- 
--u8 * hostapd_eid_rnr(struct hostapd_data *hapd, u8 *eid, u32 type)
-+u8 * _hostapd_eid_rnr(struct hostapd_data *hapd, u8 *eid, u32 type, int add_6g)
- {
- 	u8 *eid_start = eid;
- 	size_t current_len = 0;
-@@ -7955,7 +7959,7 @@ u8 * hostapd_eid_rnr(struct hostapd_data
- 		/* fallthrough */
- 
- 	case WLAN_FC_STYPE_PROBE_RESP:
--		if (mode == COLOCATED_LOWER_BAND)
-+		if (add_6g && mode == COLOCATED_LOWER_BAND)
- 			eid = hostapd_eid_rnr_colocation(hapd, eid,
- 							 &current_len);
- 
-@@ -7981,4 +7985,9 @@ u8 * hostapd_eid_rnr(struct hostapd_data
- 	return eid;
- }
- 
-+u8 * hostapd_eid_rnr(struct hostapd_data *hapd, u8 *eid, u32 type)
-+{
-+	return _hostapd_eid_rnr(hapd, eid, type, 1);
-+}
-+
- #endif /* CONFIG_NATIVE_WINDOWS */
---- a/src/ap/ieee802_11.h
-+++ b/src/ap/ieee802_11.h
-@@ -135,6 +135,7 @@ u8 * hostapd_eid_time_zone(struct hostap
- int hostapd_update_time_adv(struct hostapd_data *hapd);
- void hostapd_client_poll_ok(struct hostapd_data *hapd, const u8 *addr);
- u8 * hostapd_eid_bss_max_idle_period(struct hostapd_data *hapd, u8 *eid);
-+u8 * _hostapd_eid_rnr(struct hostapd_data *hapd, u8 *eid, u32 type, int add_6g);
- u8 * hostapd_eid_rnr(struct hostapd_data *hapd, u8 *eid, u32 type);
- u8 * hostapd_eid_multiple_bssid(struct hostapd_data *hapd,
- 				struct hostapd_data *req_bss, u8 *eid, u8 *end,
-@@ -146,6 +147,7 @@ size_t hostapd_eid_multiple_bssid_len(st
- 				      struct hostapd_data *req_bss, u32 type,
- 				      const u8 *known_bssids,
- 				      u8 known_bssids_len, size_t *rnr_len);
-+size_t _hostapd_eid_rnr_len(struct hostapd_data *hapd, u32 type, int add_6g);
- size_t hostapd_eid_rnr_len(struct hostapd_data *hapd, u32 type);
- int auth_sae_init_committed(struct hostapd_data *hapd, struct sta_info *sta);
- #ifdef CONFIG_SAE
---- a/src/ap/beacon.c
-+++ b/src/ap/beacon.c
-@@ -463,7 +463,8 @@ static u8 * hostapd_eid_supported_op_cla
- static u8 * hostapd_gen_probe_resp(struct hostapd_data *hapd,
- 				   const struct ieee80211_mgmt *req,
- 				   int is_p2p, size_t *resp_len,
--				   const u8 *known_bssids, u8 known_bssids_len)
-+				   const u8 *known_bssids, u8 known_bssids_len,
-+				   int add_6g)
- {
- 	struct hostapd_data *req_bss = NULL;
- 	struct ieee80211_mgmt *resp;
-@@ -523,7 +524,7 @@ static u8 * hostapd_gen_probe_resp(struc
- 							 known_bssids,
- 							 known_bssids_len,
- 							 NULL);
--	buflen += hostapd_eid_rnr_len(hapd, WLAN_FC_STYPE_PROBE_RESP);
-+	buflen += _hostapd_eid_rnr_len(hapd, WLAN_FC_STYPE_PROBE_RESP, add_6g);
- 
- 	resp = os_zalloc(buflen);
- 	if (resp == NULL)
-@@ -706,7 +707,7 @@ static u8 * hostapd_gen_probe_resp(struc
- 	pos = hostapd_eid_mbo(hapd, pos, (u8 *) resp + buflen - pos);
- 	pos = hostapd_eid_owe_trans(hapd, pos, (u8 *) resp + buflen - pos);
- 	pos = hostapd_eid_dpp_cc(hapd, pos, (u8 *) resp + buflen - pos);
--	pos = hostapd_eid_rnr(hapd, pos, WLAN_FC_STYPE_PROBE_RESP);
-+	pos = _hostapd_eid_rnr(hapd, pos, WLAN_FC_STYPE_PROBE_RESP, add_6g);
- 
- 	if (hapd->conf->vendor_elements) {
- 		os_memcpy(pos, wpabuf_head(hapd->conf->vendor_elements),
-@@ -930,6 +931,7 @@ void handle_probe_req(struct hostapd_dat
- 		.ssi_signal = ssi_signal,
- 		.elems = &elems,
- 	};
-+	int ubus_response;
- 
- 	if (hapd->iconf->rssi_ignore_probe_request && ssi_signal &&
- 	    ssi_signal < hapd->iconf->rssi_ignore_probe_request)
-@@ -1118,7 +1120,12 @@ void handle_probe_req(struct hostapd_dat
- 	}
- #endif /* CONFIG_P2P */
- 
--	if (hostapd_ubus_handle_event(hapd, &req)) {
-+	ubus_response = hostapd_ubus_handle_event(hapd, &req);
-+
-+	if (ubus_response == 2) {
-+		wpa_printf(MSG_DEBUG, "Probe request for " MACSTR " without 6G RNR.\n",
-+		       MAC2STR(mgmt->sa));
-+	} else if (ubus_response) {
- 		wpa_printf(MSG_DEBUG, "Probe request for " MACSTR " rejected by ubus handler.\n",
- 		       MAC2STR(mgmt->sa));
- 		return;
-@@ -1170,7 +1177,7 @@ void handle_probe_req(struct hostapd_dat
- 
- 	resp = hostapd_gen_probe_resp(hapd, mgmt, elems.p2p != NULL,
- 				      &resp_len, elems.known_bssids,
--				      elems.known_bssids_len);
-+				      elems.known_bssids_len, ubus_response == 2 ? 0 : 1);
- 	if (resp == NULL)
- 		return;
- 
-@@ -1239,7 +1246,7 @@ static u8 * hostapd_probe_resp_offloads(
- 			   "this");
- 
- 	/* Generate a Probe Response template for the non-P2P case */
--	return hostapd_gen_probe_resp(hapd, NULL, 0, resp_len, NULL, 0);
-+	return hostapd_gen_probe_resp(hapd, NULL, 0, resp_len, NULL, 0, 1);
- }
- 
- #endif /* NEED_AP_MLME */
-@@ -1269,7 +1276,7 @@ static u8 * hostapd_unsol_bcast_probe_re
- 
- 	return hostapd_gen_probe_resp(hapd, NULL, 0,
- 				      &params->unsol_bcast_probe_resp_tmpl_len,
--				      NULL, 0);
-+				      NULL, 0, 1);
- }
- #endif /* CONFIG_IEEE80211AX */
- 

feeds/ipq807x_v5.4/hostapd/patches/zzz-radius-extended-avp.patch

@@ -1,11 +0,0 @@
---- a/src/radius/radius.c
-+++ b/src/radius/radius.c
-@@ -755,7 +755,7 @@ struct radius_attr_hdr * radius_msg_add_
- 			ext->length = sizeof(*ext) + 1 + alen;
- 			ext->ext_type = ext_type;
- 			wpabuf_put_u8(msg->buf, data_len > alen ? 0x80 : 0);
--			wpabuf_put_data(msg->buf, data, data_len);
-+			wpabuf_put_data(msg->buf, data, alen);
- 			data += alen;
- 			data_len -= alen;
- 			if (radius_msg_add_attr_to_array(

feeds/ipq807x_v5.4/hostapd/patches/zzz-roaming-key.patch

@@ -1,69 +0,0 @@
---- a/hostapd/config_file.c
-+++ b/hostapd/config_file.c
-@@ -3154,6 +3154,8 @@ static int hostapd_config_fill(struct ho
- 		bss->ft_psk_generate_local = atoi(pos);
- 	} else if (os_strcmp(buf, "ft_l2_refresh") == 0) {
- 		bss->ft_l2_refresh = atoi(pos);
-+	} else if (os_strcmp(buf, "ft_key") == 0) {
-+		strncpy(bss->ft_key, pos, sizeof(bss->ft_key));
- #endif /* CONFIG_IEEE80211R_AP */
- #ifndef CONFIG_NO_CTRL_IFACE
- 	} else if (os_strcmp(buf, "ctrl_interface") == 0) {
-@@ -4996,8 +4998,22 @@ struct hostapd_config * hostapd_config_r
- 
- 	fclose(f);
- 
--	for (i = 0; i < conf->num_bss; i++)
-+	for (i = 0; i < conf->num_bss; i++) {
-+		if (*conf->bss[i]->ft_key) {
-+			u8 buffer[128];
-+			sprintf(buffer, "%02X:%02X:%02X:%02X:%02X:%02X %02X%02X%02X%02X%02X%02X %s", MAC2STR(conf->bss[i]->bssid), MAC2STR(conf->bss[i]->bssid), conf->bss[i]->ft_key);
-+			add_r0kh(conf->bss[i], buffer);
-+			sprintf(buffer, "%02X:%02X:%02X:%02X:%02X:%02X %02X:%02X:%02X:%02X:%02X:%02X %s", MAC2STR(conf->bss[i]->bssid), MAC2STR(conf->bss[i]->bssid), conf->bss[i]->ft_key);
-+			add_r1kh(conf->bss[i], buffer);
-+			sprintf(buffer, "ff:ff:ff:ff:ff:ff * %s", conf->bss[i]->ft_key);
-+			add_r0kh(conf->bss[i], buffer);
-+			sprintf(buffer, "00:00:00:00:00:00 00:00:00:00:00:00 %s", conf->bss[i]->ft_key);
-+			add_r1kh(conf->bss[i], buffer);
-+			hexstr2bin(conf->bss[i]->bssid, conf->bss[i]->r1_key_holder, FT_R1KH_ID_LEN); 
-+			conf->bss[i]->r0_key_holder_bssid = 1;
-+		}
- 		hostapd_set_security_params(conf->bss[i], 1);
-+	}
- 
- 	if (hostapd_config_check(conf, 1))
- 		errors++;
---- a/src/ap/ap_config.h
-+++ b/src/ap/ap_config.h
-@@ -403,6 +403,7 @@ struct hostapd_bss_config {
- 	int ft_psk_generate_local;
- 	int ft_l2_refresh;
- 	int r1_max_key_lifetime;
-+	u8 ft_key[65];
- #endif /* CONFIG_IEEE80211R_AP */
- 
- 	char *ctrl_interface; /* directory for UNIX domain sockets */
---- a/src/ap/ap_config.h
-+++ b/src/ap/ap_config.h
-@@ -390,6 +390,7 @@ struct hostapd_bss_config {
- 	/* IEEE 802.11r - Fast BSS Transition */
- 	u8 mobility_domain[MOBILITY_DOMAIN_ID_LEN];
- 	u8 r1_key_holder[FT_R1KH_ID_LEN];
-+	int r0_key_holder_bssid;
- 	u32 r0_key_lifetime; /* PMK-R0 lifetime seconds */
- 	int rkh_pos_timeout;
- 	int rkh_neg_timeout;
---- a/src/ap/wpa_auth_glue.c
-+++ b/src/ap/wpa_auth_glue.c
-@@ -80,7 +80,10 @@ static void hostapd_wpa_auth_conf(struct
- 	os_memcpy(wconf->ssid, conf->ssid.ssid, wconf->ssid_len);
- 	os_memcpy(wconf->mobility_domain, conf->mobility_domain,
- 		  MOBILITY_DOMAIN_ID_LEN);
--	if (conf->nas_identifier &&
-+	if (1 || conf->r0_key_holder_bssid) {
-+		sprintf(wconf->r0_key_holder, "%02X%02X%02X%02X%02X%02X", MAC2STR(conf->bssid));
-+		wconf->r0_key_holder_len = 12;
-+	} else if (conf->nas_identifier &&
- 	    os_strlen(conf->nas_identifier) <= FT_R0KH_ID_MAX_LEN) {
- 		wconf->r0_key_holder_len = os_strlen(conf->nas_identifier);
- 		os_memcpy(wconf->r0_key_holder, conf->nas_identifier,

feeds/ipq807x_v5.4/hostapd/src/src/ap/ubus.c

@@ -1830,8 +1830,7 @@ ubus_event_cb(struct ubus_notify_request *req, int idx, int ret)
 {
 	struct ubus_event_req *ureq = container_of(req, struct ubus_event_req, nreq);
 
-	if (!ureq->resp)
-		ureq->resp = ret;
+	ureq->resp = ret;
 }
 
 int hostapd_ubus_handle_event(struct hostapd_data *hapd, struct hostapd_ubus_request *req)
@@ -1864,7 +1863,6 @@ int hostapd_ubus_handle_event(struct hostapd_data *hapd, struct hostapd_ubus_req
 
 	blob_buf_init(&b, 0);
 	blobmsg_add_macaddr(&b, "address", addr);
-	blobmsg_add_string(&b, "ifname", hapd->conf->iface);
 	if (req->mgmt_frame)
 		blobmsg_add_macaddr(&b, "target", req->mgmt_frame->da);
 	if (req->ssi_signal)

feeds/ipq807x_v5.4/hostapd/src/src/ap/ucode.c

@@ -9,7 +9,6 @@
 #include "ap_drv_ops.h"
 #include "dfs.h"
 #include "acs.h"
-#include "ieee802_11_auth.h"
 #include <libubox/uloop.h>
 
 static uc_resource_type_t *global_type, *bss_type, *iface_type;
@@ -256,7 +255,6 @@ uc_hostapd_bss_set_config(uc_vm_t *vm, size_t nargs)
 
 	hostapd_setup_bss(hapd, hapd == iface->bss[0], true);
 	hostapd_ucode_update_interfaces();
-	hostapd_owe_update_trans(iface);
 
 done:
 	ret = 0;
@@ -377,7 +375,6 @@ uc_hostapd_iface_add_bss(uc_vm_t *vm, size_t nargs)
 	conf->bss[idx] = NULL;
 	ret = hostapd_ucode_bss_get_uval(hapd);
 	hostapd_ucode_update_interfaces();
-	hostapd_owe_update_trans(iface);
 	goto out;
 
 deinit_ctrl:
@@ -605,7 +602,6 @@ out:
 
 		ieee802_11_set_beacon(hapd);
 	}
-	hostapd_owe_update_trans(iface);
 
 	return ucv_boolean_new(true);
 }
@@ -697,7 +693,6 @@ uc_hostapd_bss_rename(uc_vm_t *vm, size_t nargs)
 	hostapd_ubus_add_bss(hapd);
 
 	hostapd_ucode_update_interfaces();
-	hostapd_owe_update_trans(hapd->iface);
 out:
 	if (interfaces->ctrl_iface_init)
 		interfaces->ctrl_iface_init(hapd);
@@ -705,113 +700,6 @@ out:
 	return ret ? NULL : ucv_boolean_new(true);
 }
 
-int hostapd_ucode_sta_auth(struct hostapd_data *hapd, struct sta_info *sta)
-{
-	char addr[sizeof(MACSTR)];
-	uc_value_t *val, *cur;
-	int ret = 0;
-
-	if (wpa_ucode_call_prepare("sta_auth"))
-		return 0;
-
-	uc_value_push(ucv_get(ucv_string_new(hapd->conf->iface)));
-
-	snprintf(addr, sizeof(addr), MACSTR, MAC2STR(sta->addr));
-	val = ucv_string_new(addr);
-	uc_value_push(ucv_get(val));
-
-	val = wpa_ucode_call(2);
-
-	cur = ucv_object_get(val, "psk", NULL);
-	if (ucv_type(cur) == UC_ARRAY) {
-		struct hostapd_sta_wpa_psk_short *p, **next;
-		size_t len = ucv_array_length(cur);
-
-		next = &sta->psk;
-		hostapd_free_psk_list(*next);
-		*next = NULL;
-
-		for (size_t i = 0; i < len; i++) {
-			uc_value_t *cur_psk;
-			const char *str;
-			size_t str_len;
-
-			cur_psk = ucv_array_get(cur, i);
-			str = ucv_string_get(cur_psk);
-			str_len = strlen(str);
-			if (!str || str_len < 8 || str_len > 64)
-				continue;
-
-			p = os_zalloc(sizeof(*p));
-			if (len == 64) {
-				if (hexstr2bin(str, p->psk, PMK_LEN) < 0) {
-					free(p);
-					continue;
-				}
-			} else {
-				p->is_passphrase = 1;
-				memcpy(p->passphrase, str, str_len + 1);
-			}
-
-			*next = p;
-			next = &p->next;
-		}
-	}
-
-	cur = ucv_object_get(val, "force_psk", NULL);
-	sta->use_sta_psk = ucv_is_truish(cur);
-
-	cur = ucv_object_get(val, "status", NULL);
-	if (ucv_type(cur) == UC_INTEGER)
-		ret = ucv_int64_get(cur);
-
-	ucv_put(val);
-	ucv_gc(vm);
-
-	return ret;
-}
-
-void hostapd_ucode_sta_connected(struct hostapd_data *hapd, struct sta_info *sta)
-{
-	struct hostapd_sta_wpa_psk_short *psk = sta->psk;
-	char addr[sizeof(MACSTR)];
-	uc_value_t *val, *cur;
-	int ret = 0;
-
-	if (wpa_ucode_call_prepare("sta_connected"))
-		return;
-
-	uc_value_push(ucv_get(ucv_string_new(hapd->conf->iface)));
-
-	snprintf(addr, sizeof(addr), MACSTR, MAC2STR(sta->addr));
-	val = ucv_string_new(addr);
-	uc_value_push(ucv_get(val));
-
-	val = ucv_object_new(vm);
-	if (sta->psk_idx)
-		ucv_object_add(val, "psk_idx", ucv_int64_new(sta->psk_idx - 1));
-	if (sta->psk)
-		ucv_object_add(val, "psk", ucv_string_new(sta->psk->passphrase));
-	uc_value_push(ucv_get(val));
-
-	val = wpa_ucode_call(3);
-	if (ucv_type(val) != UC_OBJECT)
-		goto out;
-
-	cur = ucv_object_get(val, "vlan", NULL);
-	if (ucv_type(cur) == UC_INTEGER) {
-		struct vlan_description vdesc = {
-			.notempty = 1,
-			.untagged = ucv_int64_get(cur),
-		};
-
-		ap_sta_set_vlan(hapd, sta, &vdesc);
-		ap_sta_bind_vlan(hapd, sta);
-	}
-
-out:
-	ucv_put(val);
-}
 
 int hostapd_ucode_init(struct hapd_interfaces *ifaces)
 {

feeds/ipq807x_v5.4/hostapd/src/src/ap/ucode.h

@@ -23,8 +23,6 @@ int hostapd_ucode_init(struct hapd_interfaces *ifaces);
 
 void hostapd_ucode_free(void);
 void hostapd_ucode_free_iface(struct hostapd_iface *iface);
-int hostapd_ucode_sta_auth(struct hostapd_data *hapd, struct sta_info *sta);
-void hostapd_ucode_sta_connected(struct hostapd_data *hapd, struct sta_info *sta);
 void hostapd_ucode_add_bss(struct hostapd_data *hapd);
 void hostapd_ucode_free_bss(struct hostapd_data *hapd);
 void hostapd_ucode_reload_bss(struct hostapd_data *hapd);
@@ -46,13 +44,6 @@ static inline void hostapd_ucode_free_iface(struct hostapd_iface *iface)
 static inline void hostapd_ucode_reload_bss(struct hostapd_data *hapd)
 {
 }
-static inline int hostapd_ucode_sta_auth(struct hostapd_data *hapd, struct sta_info *sta)
-{
-	return 0;
-}
-static inline void hostapd_ucode_sta_connected(struct hostapd_data *hapd, struct sta_info *sta)
-{
-}
 static inline void hostapd_ucode_add_bss(struct hostapd_data *hapd)
 {
 }

feeds/ipq807x_v5.4/ipq50xx/base-files/etc/board.d/01_leds

@@ -7,29 +7,16 @@ board_config_update
 board=$(board_name)
 
 case "$board" in
-wallys,dr5018)
-	ucidef_set_led_netdev "wan" "wan" "green:uplink" "eth0"
-	;;
 edgecore,eap104)
 	ucidef_set_led_wlan "wlan2g" "WLAN2G" "green:wifi2" "phy0tpt"
 	ucidef_set_led_wlan "wlan5g" "WLAN5G" "green:wifi5" "phy1tpt"
 	ucidef_set_led_netdev "wan" "wan" "yellow:uplink" "eth0"
-        ucidef_set_led_default "power" "POWER" "green:power" "on"
-	;;
-cig,wf186h|\
-cig,wf186w)
-        ucidef_set_led_default "power" "POWER" "green:status" "on"
-	;;
-cybertan,eww631-a1|\
-cybertan,eww631-b1)
-        ucidef_set_led_default "power" "POWER" "sys:blue" "on"
 	;;
 edgecore,oap101|\
 edgecore,oap101-6e|\
 edgecore,oap101e|\
 edgecore,oap101e-6e)
 	ucidef_set_led_netdev "wan" "wan" "red:ethernet" "eth1"
-        ucidef_set_led_default "power" "POWER" "blue:management" "on"
 	;;
 hfcl,ion4x_w|\
 hfcl,ion4xi_w)

feeds/ipq807x_v5.4/ipq50xx/base-files/etc/board.d/02_network

@@ -18,12 +18,10 @@ qcom_setup_interfaces()
 	cig,wf186h)
 		ucidef_add_switch "switch0" "4:wan" "1:lan" "2:lan" "6@eth0"
 		;;
-	sonicfi,rap630c-311g|\
 	cybertan,eww631-a1)
 		ucidef_set_interface_wan "eth0"
 		ucidef_set_interface_lan ""
 		;;
-	sonicfi,rap630w-311g|\
 	cybertan,eww631-b1)
 		ucidef_add_switch "switch1" "5:wan" "2:lan" "3:lan" "4:lan" "6@eth0"
 		;;
@@ -38,7 +36,6 @@ qcom_setup_interfaces()
 		ucidef_set_interface_lan "eth1"
 		ucidef_set_interface_wan "eth0"
 		;;
-	wallys,dr5018|\
 	edgecore,eap104)
 		ucidef_set_interface_wan "eth0"
 		ucidef_add_switch "switch1" \
@@ -59,9 +56,6 @@ qcom_setup_interfaces()
 		ucidef_add_switch "switch1" \
 			"6@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan"
 		;;
-	glinet,b3000)
-		ucidef_add_switch "switch1" "6@eth1" "1:wan" "2:lan" "3:lan"
-		;;
 	esac
 }
 
@@ -80,8 +74,6 @@ qcom_setup_macs()
 		ucidef_set_network_device_mac eth0 $wan_mac
 		ip link set eth0 address $wan_mac
 		;;
-	sonicfi,rap630c-311g|\
-	sonicfi,rap630w-311g|\
 	cybertan,eww631-a1|\
 	cybertan,eww631-b1)
 		mtd=$(find_mtd_chardev "0:APPSBLENV")
@@ -94,10 +86,6 @@ qcom_setup_macs()
 		ip link set eth0 address $wan_mac
 		ucidef_set_label_macaddr $wan_mac
 		;;
-	glinet,b3000)
-		wan_mac=$(cat /sys/class/net/eth1/address)
-		lan_mac=$(macaddr_add "$wan_mac" 2)
-		;;
 	*)
 		wan_mac=$(cat /sys/class/net/eth0/address)
 		lan_mac=$(macaddr_add "$wan_mac" 1)

feeds/ipq807x_v5.4/ipq50xx/base-files/etc/hotplug.d/firmware/10-ath11k-caldata

@@ -61,39 +61,6 @@ ath11k_generate_macs_eww631_b1() {
 	echo -ne \\x${mac2//:/\\x} >> /lib/firmware/ath11k-macs
 }
 
-ath11k_generate_macs_rap630c_311g() {
-	touch /lib/firmware/ath11k-macs
-	local dev=$(find_mtd_chardev "0:APPSBLENV")
-	mac=$(grep BaseMacAddress= $dev | cut -d '=' -f2)
-	eth=$(macaddr_canonicalize $mac)
-	mac1=$(macaddr_add $eth 1)
-	mac2=$(macaddr_add $eth 2)
-	echo -ne \\x${mac1//:/\\x} >> /lib/firmware/ath11k-macs
-	echo -ne \\x${mac2//:/\\x} >> /lib/firmware/ath11k-macs
-}
-
-ath11k_generate_macs_rap630w_311g() {
-	touch /lib/firmware/ath11k-macs
-	local dev=$(find_mtd_chardev "0:APPSBLENV")
-	mac=$(grep BaseMacAddress= $dev | cut -d '=' -f2)
-	eth=$(macaddr_canonicalize $mac)
-	mac1=$(macaddr_add $eth 2)
-	mac2=$(macaddr_add $eth 3)
-	echo -ne \\x${mac1//:/\\x} >> /lib/firmware/ath11k-macs
-	echo -ne \\x${mac2//:/\\x} >> /lib/firmware/ath11k-macs
-}
-
-ath11k_generate_macs_gl_b3000() {
-	mac=$(cat /proc/gl-hw-info/device_mac)
-	[ -z "$mac" ] && ath11k_generate_macs || {
-		touch /lib/firmware/ath11k-macs
-		mac1=$(macaddr_add $mac 2)
-		mac2=$(macaddr_add $mac 3)
-		echo -ne \\x${mac2//:/\\x} >> /lib/firmware/ath11k-macs
-		echo -ne \\x${mac1//:/\\x} >> /lib/firmware/ath11k-macs
-	}
-}
-
 caldata_die() {
 	echo "caldata: " "$*"
 	exit 1
@@ -119,8 +86,6 @@ ath11k/IPQ5018/hw1.0/caldata.bin)
 	case "$board" in
 	cig,wf186w|\
 	cig,wf186h|\
-	sonicfi,rap630c-311g|\
-	sonicfi,rap630w-311g|\
 	cybertan,eww631-a1|\
 	cybertan,eww631-b1|\
 	edgecore,eap104|\
@@ -135,9 +100,7 @@ ath11k/IPQ5018/hw1.0/caldata.bin)
 	optimcloud,d50|\
 	optimcloud,d50-5g|\
 	udaya,a6-id2|\
-	wallys,dr5018|\
-	yuncore,fap655|\
-	glinet,b3000)
+	yuncore,fap655)
 		caldata_extract "0:ART" 0x1000 0x20000  
 		;;
 	esac
@@ -146,8 +109,6 @@ ath11k/qcn6122/hw1.0/caldata_1.bin)
 	case "$board" in
 	cig,wf186w|\
 	cig,wf186h|\
-	sonicfi,rap630c-311g|\
-	sonicfi,rap630w-311g|\
 	cybertan,eww631-a1|\
 	cybertan,eww631-b1|\
 	edgecore,oap101|\
@@ -156,7 +117,6 @@ ath11k/qcn6122/hw1.0/caldata_1.bin)
 	edgecore,oap101e-6e|\
 	udaya,a6-id2|\
 	hfcl,ion4xi_w|\
-	wallys,dr5018|\
 	yuncore,fap655)
 		caldata_extract "0:ART" 0x26800 0x20000  
 		;;
@@ -164,17 +124,13 @@ ath11k/qcn6122/hw1.0/caldata_1.bin)
 	;;
 ath11k/qcn6122/hw1.0/caldata_2.bin)
 	case "$board" in
-	wallys,dr5018|\
 	edgecore,eap104|\
 	edgecore,oap101-6e|\
 	edgecore,oap101e-6e)
 		caldata_extract "0:ART" 0x4c000 0x20000  
 		;;
-	sonicfi,rap630c-311g|\
-	sonicfi,rap630w-311g|\
 	cybertan,eww631-a1|\
-	cybertan,eww631-b1|\
-	glinet,b3000)
+	cybertan,eww631-b1)
 		caldata_extract "0:ART" 0x26800 0x20000
 		;;
 	esac
@@ -195,12 +151,6 @@ ath11k-macs)
 	cig,wf186h)
 		ath11k_generate_macs_wf186w
 		;;
-	sonicfi,rap630c-311g)
-		ath11k_generate_macs_rap630c_311g
-		;;
-	sonicfi,rap630w-311g)
-		ath11k_generate_macs_rap630w_311g
-		;;		
 	cybertan,eww631-a1)
 		ath11k_generate_macs_eww631_a1
 		;;
@@ -208,7 +158,6 @@ ath11k-macs)
 		ath11k_generate_macs_eww631_b1
 		;;
 	edgecore,eap104|\
-	edgecore,oap101|\
 	edgecore,oap101-6e|\
 	edgecore,oap101e-6e|\
 	optimcloud,d60|\
@@ -222,9 +171,6 @@ ath11k-macs)
 	hfcl,ion4xi_w)
 		ath11k_generate_macs_ion4x
 		;;
-	glinet,b3000)
-		ath11k_generate_macs_gl_b3000
-		;;
 	esac
 	;;
 *)

feeds/ipq807x_v5.4/ipq50xx/base-files/etc/hotplug.d/firmware/11-ath11k-pdev-stats

@@ -1,31 +0,0 @@
-#!/bin/sh
-
-. /lib/functions.sh
-
-board=$(board_name)
-
-case "$board" in
-    "edgecore,eap101")
-        ln -s /sys/kernel/debug/ath11k/ipq6018\ hw1.0/mac0/fw_stats/pdev_stats /tmp/pdev_stats_phy0
-        ln -s /sys/kernel/debug/ath11k/ipq6018\ hw1.0/mac1/fw_stats/pdev_stats /tmp/pdev_stats_phy1
-        ;;
-    "edgecore,eap102")
-        ln -s /sys/kernel/debug/ath11k/ipq8074\ hw2.0/mac0/fw_stats/pdev_stats /tmp/pdev_stats_phy0
-        ln -s /sys/kernel/debug/ath11k/ipq8074\ hw2.0/mac1/fw_stats/pdev_stats /tmp/pdev_stats_phy1
-        ;;
-    "edgecore,oap101e-6e"|\
-    "edgecore,oap101-6e")
-        ln -s /sys/kernel/debug/ath11k/ipq5018\ hw1.0/mac0/fw_stats/pdev_stats /tmp/pdev_stats_phy0
-        ln -s /sys/kernel/debug/ath11k/qcn6122_1/mac0/fw_stats/pdev_stats /tmp/pdev_stats_phy1
-        ln -s /sys/kernel/debug/ath11k/qcn6122_2/mac0/fw_stats/pdev_stats /tmp/pdev_stats_phy2
-        ;;
-    "edgecore,oap101e"|\
-    "edgecore,oap101")
-        ln -s /sys/kernel/debug/ath11k/ipq5018\ hw1.0/mac0/fw_stats/pdev_stats /tmp/pdev_stats_phy0
-        ln -s /sys/kernel/debug/ath11k/qcn6122_1/mac0/fw_stats/pdev_stats /tmp/pdev_stats_phy1
-        ;;
-    "edgecore,eap104")
-        ln -s /sys/kernel/debug/ath11k/ipq5018\ hw1.0/mac0/fw_stats/pdev_stats /tmp/pdev_stats_phy0
-        ln -s /sys/kernel/debug/ath11k/qcn6122_2/mac0/fw_stats/pdev_stats /tmp/pdev_stats_phy1
-        ;;
-esac

feeds/ipq807x_v5.4/ipq50xx/base-files/etc/init.d/bootcount

@@ -7,11 +7,5 @@ boot() {
 	hfcl,ion4xi_w)
 		fw_setenv boot_count 0
 		;;		
-	edgecore,oap101|\
-	edgecore,eap104)
-		avail=$(fw_printenv -n upgrade_available)
-		[ "${avail}" -eq 0 ] && fw_setenv upgrade_available 1
-		fw_setenv bootcount 0
-		;;
 	esac
 }

feeds/ipq807x_v5.4/ipq50xx/base-files/lib/upgrade/platform.sh

@@ -70,12 +70,9 @@ platform_check_image() {
 	case $board in
 	cig,wf186w|\
 	cig,wf186h|\
-	sonicfi,rap630c-311g|\
-	sonicfi,rap630w-311g|\
 	cybertan,eww631-a1|\
 	cybertan,eww631-b1|\
 	edgecore,eap104|\
-	wallys,dr5018|\
 	hfcl,ion4x_w|\
 	hfcl,ion4xi_w|\
 	optimcloud,d60|\
@@ -83,7 +80,6 @@ platform_check_image() {
 	optimcloud,d50|\
 	optimcloud,d50-5g|\
 	yuncore,fap655|\
-	glinet,b3000|\
 	udaya,a6-id2|\
 	edgecore,oap101|\
 	edgecore,oap101-6e|\
@@ -102,7 +98,6 @@ platform_do_upgrade() {
 
 	board=$(board_name)
 	case $board in
-	glinet,b3000|\
 	edgecore,oap101|\
 	edgecore,oap101-6e|\
 	edgecore,oap101e|\
@@ -128,7 +123,6 @@ platform_do_upgrade() {
 	cig,wf186w|\
 	cig,wf186h|\
 	udaya,a6-id2|\
-	wallys,dr5018|\
 	optimcloud,d60|\
 	optimcloud,d60-5g|\
 	optimcloud,d50|\
@@ -140,8 +134,6 @@ platform_do_upgrade() {
 		}
 		nand_upgrade_tar "$1"
 		;;
-	sonicfi,rap630c-311g|\
-	sonicfi,rap630w-311g|\
 	cybertan,eww631-a1|\
 	cybertan,eww631-b1)
 		boot_part=$(fw_printenv bootfrom | cut  -d = -f2)

feeds/ipq807x_v5.4/ipq50xx/files/arch/arm64/boot/dts/qcom/qcom-ipq5018-gl-b3000.dts

@@ -1,801 +0,0 @@
-/dts-v1/;
-/* Copyright (c) 2018-2021, The Linux Foundation. All rights reserved.
- *
- * Copyright (c) 2021 Qualcomm Innovation Center, Inc. All rights reserved.
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- */
-
-#include "ipq5018.dtsi"
-#include <dt-bindings/input/input.h>
-
-/ {
-	#address-cells = <0x2>;
-	#size-cells = <0x2>;
-	model = "GL.iNet B3000";
-	compatible = "glinet,b3000", "qcom,ipq5018-mp03.5", "qcom,ipq5018";
-	interrupt-parent = <&intc>;
-
-	aliases {
-		serial0 = &blsp1_uart1;
-		ethernet0 = "/soc/dp1";
-		ethernet1 = "/soc/dp2";
-		led-upgrade = &led_system;
-	};
-
-	chosen {
-		bootargs = "console=ttyMSM0,115200,n8 rw init=/init";
-		bootargs-append = " swiotlb=1 coherent_pool=2M";
-		stdout-path = "serial0";
-	};
-
-	gl-hw {
-		compatible = "gl-hw-info";
-		model = "b3000";
-		radio = "radio0";
-		wan = "eth1.1";
-		lan = "eth1.2 eth1.3";
-		secondwan_vlan_port = "2";
-		dfs;
-		reset-button = "gpio-27";
-		flash_size = <128>;
-		temperature = "/sys/devices/virtual/thermal/thermal_zone0/temp";
-		factory_data {
-			device_mac = "0:ART", "0x6";
-			device_ddns = "0:ART", "0x10";
-			device_sn_bak = "0:ART", "0x20";
-			device_sn = "0:ART", "0x30";
-			country_code = "0:ART", "0x88";
-			device_cert = "0:ART", "0x50000";
-		};
-	};
-
-	reserved-memory {
-	#ifdef __IPQ_MEM_PROFILE_256_MB__
-	/*		   256 MB Profile
-	 * +==========+==============+=========================+
-	 * |	  |	      |			 |
-	 * |  Region  | Start Offset |	  Size	   |
-	 * |	  |	      |			 |
-	 * +----------+--------------+-------------------------+
-	 * |    NSS   |  0x40000000  |	   8MB	   |
-	 * +----------+--------------+-------------------------+
-	 * |   Linux  |  0x40800000  | Depends on total memory |
-	 * +----------+--------------+-------------------------+
-	 * |   uboot  |  0x4A600000  |	   4MB	   |
-	 * +----------+--------------+-------------------------+
-	 * |    SBL   |  0x4AA00000  |	   1MB	   |
-	 * +----------+--------------+-------------------------+
-	 * |   smem   |  0x4AB00000  |	   1MB	   |
-	 * +----------+--------------+-------------------------+
-	 * |    TZ    |  0x4AC00000  |	   4MB	   |
-	 * +----------+--------------+-------------------------+
-	 * |    Q6    |	      |			 |
-	 * |   code/  |  0x4B000000  |	  20MB	   |
-	 * |   data   |	      |			 |
-	 * +----------+--------------+-------------------------+
-	 * |  IPQ5018 |	      |			 |
-	 * |   data   |  0x4C400000  |	  13MB	   |
-	 * +----------+--------------+-------------------------+
-	 * |  IPQ5018 |	      |			 |
-	 * |  M3 Dump |  0x4D100000  |	   1MB	   |
-	 * +----------+--------------+-------------------------+
-	 * |  IPQ5018 |	      |			 |
-	 * |   QDSS   |  0x4D200000  |	   1MB	   |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_1|	      |			 |
-	 * |   data   |  0x4D300000  |	  13MB	   |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_1|	      |			 |
-	 * |  M3 Dump |  0x4E000000  |	   1MB	   |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_1|	      |			 |
-	 * |   QDSS   |  0x4E100000  |	   1MB	   |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_2|	      |			 |
-	 * |   data   |  0x4E200000  |	  13MB	   |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_2|	      |			 |
-	 * |  M3 Dump |  0x4EF00000  |	   1MB	   |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_2|	      |			 |
-	 * |   QDSS   |  0x4F000000  |	   1MB	   |
-	 * +----------+--------------+-------------------------+
-	 * |						   |
-	 * |	    Rest of the memory for Linux	   |
-	 * |						   |
-	 * +===================================================+
-	 */
-		q6_mem_regions: q6_mem_regions@4B000000 {
-			no-map;
-			reg = <0x0 0x4B000000 0x0 0x4100000>;
-		};
-
-		q6_code_data: q6_code_data@4B000000 {
-			no-map;
-			reg = <0x0 0x4B000000 0x0 0x1400000>;
-		};
-
-		q6_ipq5018_data: q6_ipq5018_data@4C400000 {
-			no-map;
-			reg = <0x0 0x4C400000 0x0 0xD00000>;
-		};
-
-		m3_dump: m3_dump@4D100000 {
-			no-map;
-			reg = <0x0 0x4D100000 0x0 0x100000>;
-		};
-
-		q6_etr_region: q6_etr_dump@4D200000 {
-			no-map;
-			reg = <0x0 0x4D200000 0x0 0x100000>;
-		};
-
-		q6_qcn6122_data1: q6_qcn6122_data1@4D300000 {
-			no-map;
-			reg = <0x0 0x4D300000 0x0 0xD00000>;
-		};
-
-		m3_dump_qcn6122_1: m3_dump_qcn6122_1@4E000000 {
-			no-map;
-			reg = <0x0 0x4E000000 0x0 0x100000>;
-		};
-
-		q6_qcn6122_etr_1: q6_qcn6122_etr_1@4E100000 {
-			no-map;
-			reg = <0x0 0x4E100000 0x0 0x100000>;
-		};
-
-		q6_qcn6122_data2: q6_qcn6122_data2@4E200000 {
-			no-map;
-			reg = <0x0 0x4E200000 0x0 0xD00000>;
-		};
-
-		m3_dump_qcn6122_2: m3_dump_qcn6122_2@4EF00000 {
-			no-map;
-			reg = <0x0 0x4EF00000 0x0 0x100000>;
-		};
-
-		q6_qcn6122_etr_2: q6_qcn6122_etr_2@4F000000 {
-			no-map;
-			reg = <0x0 0x4F000000 0x0 0x100000>;
-		};
-	#else
-	/*		 512MB/1GB Profiles
-	 * +==========+==============+=========================+
-	 * |	  |	      |			 |
-	 * |  Region  | Start Offset |	  Size	   |
-	 * |	  |	      |			 |
-	 * +----------+--------------+-------------------------+
-	 * |    NSS   |  0x40000000  |	  16MB	   |
-	 * +----------+--------------+-------------------------+
-	 * |   Linux  |  0x41000000  | Depends on total memory |
-	 * +----------+--------------+-------------------------+
-	 * |   uboot  |  0x4A600000  |	   4MB	   |
-	 * +----------+--------------+-------------------------+
-	 * |    SBL   |  0x4AA00000  |	   1MB	   |
-	 * +----------+--------------+-------------------------+
-	 * |   smem   |  0x4AB00000  |	   1MB	   |
-	 * +----------+--------------+-------------------------+
-	 * |    TZ    |  0x4AC00000  |	   4MB	   |
-	 * +----------+--------------+-------------------------+
-	 * |    Q6    |	      |			 |
-	 * |   code/  |  0x4B000000  |	  20MB	   |
-	 * |   data   |	      |			 |
-	 * +----------+--------------+-------------------------+
-	 * |  IPQ5018 |	      |			 |
-	 * |   data   |  0x4C400000  |	  13MB	   |
-	 * +----------+--------------+-------------------------+
-	 * |  IPQ5018 |	      |			 |
-	 * |  M3 Dump |  0x4D100000  |	   1MB	   |
-	 * +----------+--------------+-------------------------+
-	 * |  IPQ5018 |	      |			 |
-	 * |   QDSS   |  0x4D200000  |	   1MB	   |
-	 * +----------+--------------+-------------------------+
-	 * |  IPQ5018 |	      |			 |
-	 * |  Caldb   |  0x4D300000  |	   2MB	   |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_1|	      |			 |
-	 * |   data   |  0x4D500000  |	  13MB	   |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_1|	      |			 |
-	 * |  M3 Dump |  0x4E200000  |	   1MB	   |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_1|	      |			 |
-	 * |   QDSS   |  0x4E300000  |	   1MB	   |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_1|	      |			 |
-	 * |  Caldb   |  0x4E400000  |	   5MB	   |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_2|	      |			 |
-	 * |   data   |  0x4E900000  |	  13MB	   |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_2|	      |			 |
-	 * |  M3 Dump |  0x4F600000  |	   1MB	   |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_2|	      |			 |
-	 * |   QDSS   |  0x4F700000  |	   1MB	   |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_2|	      |			 |
-	 * |  Caldb   |  0x4F800000  |	   5MB	   |
-	 * +----------+--------------+-------------------------+
-	 * |						   |
-	 * |	    Rest of the memory for Linux	   |
-	 * |						   |
-	 * +===================================================+
-	 */
-		q6_mem_regions: q6_mem_regions@4B000000 {
-			no-map;
-			reg = <0x0 0x4B000000 0x0 0x4D00000>;
-		};
-
-		q6_code_data: q6_code_data@4B000000 {
-			no-map;
-			reg = <0x0 0x4B000000 0x0 01400000>;
-		};
-
-		q6_ipq5018_data: q6_ipq5018_data@4C400000 {
-			no-map;
-			reg = <0x0 0x4C400000 0x0 0xD00000>;
-		};
-
-		m3_dump: m3_dump@4D100000 {
-			no-map;
-			reg = <0x0 0x4D100000 0x0 0x100000>;
-		};
-
-		q6_etr_region: q6_etr_dump@4D200000 {
-			no-map;
-			reg = <0x0 0x4D200000 0x0 0x100000>;
-		};
-
-		q6_caldb_region: q6_caldb_region@4D300000 {
-			no-map;
-			reg = <0x0 0x4D300000 0x0 0x200000>;
-		};
-
-		q6_qcn6122_data1: q6_qcn6122_data1@4D500000 {
-			no-map;
-			reg = <0x0 0x4D500000 0x0 0xD00000>;
-		};
-
-		m3_dump_qcn6122_1: m3_dump_qcn6122_1@4E200000 {
-			no-map;
-			reg = <0x0 0x4E200000 0x0 0x100000>;
-		};
-
-		q6_qcn6122_etr_1: q6_qcn6122_etr_1@4E300000 {
-			no-map;
-			reg = <0x0 0x4E300000 0x0 0x100000>;
-		};
-
-		q6_qcn6122_caldb_1: q6_qcn6122_caldb_1@4E400000 {
-			no-map;
-			reg = <0x0 0x4E400000 0x0 0x500000>;
-		};
-
-		q6_qcn6122_data2: q6_qcn6122_data2@4E900000 {
-			no-map;
-			reg = <0x0 0x4E900000 0x0 0xD00000>;
-		};
-
-		m3_dump_qcn6122_2: m3_dump_qcn6122_2@4F600000 {
-			no-map;
-			reg = <0x0 0x4F600000 0x0 0x100000>;
-		};
-
-		q6_qcn6122_etr_2: q6_qcn6122_etr_2@4F700000 {
-			no-map;
-			reg = <0x0 0x4F700000 0x0 0x100000>;
-		};
-
-		q6_qcn6122_caldb_2: q6_qcn6122_caldb_2@4F800000 {
-			no-map;
-			reg = <0x0 0x4F800000 0x0 0x500000>;
-		};
-
-	#endif
-	};
-
-	soc {
-		serial@78af000 {
-			status = "ok";
-		};
-
-		qpic_bam: dma@7984000{
-			status = "ok";
-		};
-
-		nand: qpic-nand@79b0000 {
-			pinctrl-0 = <&qspi_nand_pins>;
-			pinctrl-names = "default";
-			status = "ok";
-		};
-
-		mdio0: mdio@88000 {
-			status = "ok";
-
-			ethernet-phy@0 {
-				reg = <7>;
-			};
-		};
-
-		mdio1: mdio@90000 {
-			status = "ok";
-			pinctrl-0 = <&mdio1_pins>;
-			pinctrl-names = "default";
-			phy-reset-gpio = <&tlmm 39 0>;
-			ethernet-phy@0 {
-				reg = <0>;
-			};
-
-			ethernet-phy@1 {
-				reg = <1>;
-			};
-
-			ethernet-phy@2 {
-				reg = <2>;
-			};
-
-			ethernet-phy@3 {
-				reg = <3>;
-			};
-		};
-
-		ess-instance {
-			num_devices = <0x2>;
-			ess-switch@0x39c00000 {
-				compatible = "qcom,ess-switch-ipq50xx";
-				device_id = <0>;
-				switch_mac_mode = <0xf>; /* mac mode for uniphy instance*/
-				cmnblk_clk = "internal_96MHz"; /* cmnblk clk*/
-				qcom,port_phyinfo {
-					port@0 {
-						port_id = <1>;
-						phy_address = <7>;
-					};
-					port@1 {
-						port_id = <2>;
-						forced-speed = <1000>;
-						forced-duplex = <1>;
-					};
-				};
-				led_source@0 {
-					source = <0>;
-					mode = "normal";
-					speed = "all";
-					blink_en = "enable";
-					active = "high";
-				};
-			};
-			ess-switch1@1 {
-				compatible = "qcom,ess-switch-qca83xx";
-				device_id = <1>;
-				switch_access_mode = "mdio";
-				mdio-bus = <&mdio1>;
-				reset_gpio = <&tlmm 0x27 0>;
-				switch_cpu_bmp = <0x40>;  /* cpu port bitmap */
-				switch_lan_bmp = <0xc>; /* lan port bitmap */
-				switch_wan_bmp = <0x2>;  /* wan port bitmap */
-				qca,ar8327-initvals = <
-						0x00004 0x7600000   /* PAD0_MODE */
-						0x00008 0x1000000   /* PAD5_MODE */
-						0x0000c 0x80	/* PAD6_MODE */
-						0x00010 0x2613a0    /* PORT6 FORCE MODE*/
-						0x000e4 0xaa545     /* MAC_POWER_SEL */
-						0x000e0 0xc74164de  /* SGMII_CTRL */
-						0x0007c 0x4e	/* PORT0_STATUS */
-						0x00094 0x4e	/* PORT6_STATUS */
-				>;
-				qcom,port_phyinfo {
-					port@0 {
-						port_id = <1>;
-						phy_address = <0>;
-					};
-					port@1 {
-						port_id = <2>;
-						phy_address = <1>;
-					};
-					port@2 {
-						port_id = <3>;
-						phy_address = <2>;
-					};
-					port@3 {
-						port_id = <4>;
-						phy_address = <3>;
-					};
-				};
-			};
-		};
-
-		dp1 {
-			device_type = "network";
-			compatible = "qcom,nss-dp";
-			clocks = <&gcc GCC_SNOC_GMAC0_AXI_CLK>;
-			clock-names = "nss-snoc-gmac-axi-clk";
-			qcom,id = <1>;
-			reg = <0x39C00000 0x10000>;
-			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
-			qcom,mactype = <2>;
-			qcom,link-poll = <1>;
-			qcom,phy-mdio-addr = <7>;
-			mdio-bus = <&mdio0>;
-			local-mac-address = [000000000000];
-			phy-mode = "sgmii";
-			qcom,rx-page-mode = <0>;
-		};
-
-		dp2 {
-			device_type = "network";
-			compatible = "qcom,nss-dp";
-			clocks = <&gcc GCC_SNOC_GMAC1_AXI_CLK>;
-			clock-names = "nss-snoc-gmac-axi-clk";
-			qcom,id = <2>;
-			reg = <0x39D00000 0x10000>;
-			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
-			qcom,mactype = <2>;
-			local-mac-address = [000000000000];
-			phy-mode = "sgmii";
-			qcom,rx-page-mode = <0>;
-		};
-
-		nss-macsec1 {
-			compatible = "qcom,nss-macsec";
-			phy_addr = <0x1c>;
-			mdiobus = <&mdio1>;
-		};
-
-	};
-
-	qcom,test@0 {
-		status = "ok";
-	};
-
-	thermal-zones {
-		status = "ok";
-	};
-};
-
-&tlmm {
-	pinctrl-names = "default";
-
-	qspi_nand_pins: qspi_nand_pins {
-		qspi_clock {
-			pins = "gpio9";
-			function = "qspi_clk";
-			drive-strength = <8>;
-			bias-disable;
-		};
-
-		qspi_cs {
-			pins = "gpio8";
-			function = "qspi_cs";
-			drive-strength = <8>;
-			bias-disable;
-		};
-
-		qspi_data {
-			pins = "gpio4", "gpio5", "gpio6", "gpio7";
-			function = "qspi_data";
-			drive-strength = <8>;
-			bias-disable;
-		};
-	};
-
-	mdio1_pins: mdio_pinmux {
-		mux_0 {
-			pins = "gpio36";
-			function = "mdc";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
-
-		mux_1 {
-			pins = "gpio37";
-			function = "mdio";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
-	};
-
-	button_pins: button_pins {
-		reset_button {
-			pins = "gpio27";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
-	};
-
-	leds_pins: leds_pins {
-		led_system {
-			pins = "gpio24";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-		led_white {
-			pins = "gpio23";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-	};
-};
-
-&soc {
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		pinctrl-0 = <&button_pins>;
-		pinctrl-names = "default";
-
-		reset {
-			label = "reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&tlmm 27 GPIO_ACTIVE_LOW>;
-			linux,input-type = <1>;
-			debounce-interval = <60>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&leds_pins>;
-		pinctrl-names = "default";
-
-		led_system: led@24 {
-			label = "blue_led";
-			gpios = <&tlmm 24 GPIO_ACTIVE_HIGH>;
-			default-state = "on";
-		};
-		led@23 {
-			label = "white_led";
-			gpios = <&tlmm 23 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-	};
-};
-
-&q6v5_wcss {
-	compatible = "qcom,ipq5018-q6-mpd";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	ranges;
-	firmware = "IPQ5018/q6_fw.mdt";
-	reg = <0x0cd00000 0x4040>,
-		<0x1938000 0x8>,
-		<0x193d204 0x4>;
-	reg-names = "qdsp6",
-			"tcsr-msip",
-			"tcsr-q6";
-	resets = <&gcc GCC_WCSSAON_RESET>,
-			<&gcc GCC_WCSS_Q6_BCR>;
-
-	reset-names = "wcss_aon_reset",
-			"wcss_q6_reset";
-
-	clocks = <&gcc GCC_Q6_AXIS_CLK>,
-		<&gcc GCC_WCSS_ECAHB_CLK>,
-		<&gcc GCC_Q6_AXIM_CLK>,
-		<&gcc GCC_Q6_AXIM2_CLK>,
-		<&gcc GCC_Q6_AHB_CLK>,
-		<&gcc GCC_Q6_AHB_S_CLK>,
-		<&gcc GCC_WCSS_AXI_S_CLK>;
-	clock-names = "gcc_q6_axis_clk",
-		"gcc_wcss_ecahb_clk",
-		"gcc_q6_axim_clk",
-		"gcc_q6_axim2_clk",
-		"gcc_q6_ahb_clk",
-		"gcc_q6_ahb_s_clk",
-		"gcc_wcss_axi_s_clk";
-
-	#ifdef __IPQ_MEM_PROFILE_256_MB__
-		memory-region = <&q6_mem_regions>, <&q6_etr_region>;
-	#else
-		memory-region = <&q6_mem_regions>, <&q6_etr_region>,
-				<&q6_caldb_region>;
-	#endif
-
-	qcom,rproc = <&q6v5_wcss>;
-	qcom,bootargs_smem = <507>;
-	boot-args = <0x1 0x4 0x3 0x0F 0x0 0x0>,
-			<0x2 0x4 0x2 0x12 0x0 0x0>;
-	status = "ok";
-	q6_wcss_pd1: remoteproc_pd1@4ab000 {
-		compatible = "qcom,ipq5018-wcss-ahb-mpd";
-		reg = <0x4ab000 0x20>;
-		reg-names = "rmb";
-		firmware = "IPQ5018/q6_fw.mdt";
-		m3_firmware = "IPQ5018/m3_fw.mdt";
-		interrupts-extended = <&wcss_smp2p_in 8 0>,
-					<&wcss_smp2p_in 9 0>,
-					<&wcss_smp2p_in 12 0>,
-					<&wcss_smp2p_in 11 0>;
-		interrupt-names = "fatal",
-					"ready",
-					"spawn-ack",
-					"stop-ack";
-
-		resets = <&gcc GCC_WCSSAON_RESET>,
-				<&gcc GCC_WCSS_BCR>,
-				<&gcc GCC_CE_BCR>;
-		reset-names = "wcss_aon_reset",
-				"wcss_reset",
-				"ce_reset";
-
-		clocks = <&gcc GCC_WCSS_AHB_S_CLK>,
-				<&gcc GCC_WCSS_ACMT_CLK>,
-				<&gcc GCC_WCSS_AXI_M_CLK>;
-		clock-names = "gcc_wcss_ahb_s_clk",
-					"gcc_wcss_acmt_clk",
-					"gcc_wcss_axi_m_clk";
-
-		qcom,halt-regs = <&tcsr_q6_block 0xa000 0xd000 0x0>;
-
-		qcom,smem-states = <&wcss_smp2p_out 8>,
-					<&wcss_smp2p_out 9>,
-					<&wcss_smp2p_out 10>;
-		qcom,smem-state-names = "shutdown",
-					"stop",
-					"spawn";
-	#ifdef __IPQ_MEM_PROFILE_256_MB__
-		memory-region = <&q6_ipq5018_data>, <&m3_dump>,
-				<&q6_etr_region>;
-	#else
-		memory-region = <&q6_ipq5018_data>, <&m3_dump>,
-				<&q6_etr_region>, <&q6_caldb_region>;
-	#endif
-
-	};
-
-	q6_wcss_pd2: remoteproc_pd2 {
-		compatible = "qcom,ipq5018-wcss-pcie-mpd";
-		firmware = "IPQ5018/q6_fw.mdt";
-		m3_firmware = "qcn6122/m3_fw.mdt";
-		interrupts-extended = <&wcss_smp2p_in 16 0>,
-					<&wcss_smp2p_in 17 0>,
-					<&wcss_smp2p_in 20 0>,
-					<&wcss_smp2p_in 19 0>;
-		interrupt-names = "fatal",
-					"ready",
-					"spawn-ack",
-					"stop-ack";
-
-		qcom,smem-states = <&wcss_smp2p_out 16>,
-					<&wcss_smp2p_out 17>,
-					<&wcss_smp2p_out 18>;
-		qcom,smem-state-names = "shutdown",
-					"stop",
-					"spawn";
-	#ifdef __IPQ_MEM_PROFILE_256_MB__
-		memory-region = <&q6_qcn6122_data1>, <&m3_dump_qcn6122_1>,
-				<&q6_qcn6122_etr_1>;
-	#else
-		memory-region = <&q6_qcn6122_data1>, <&m3_dump_qcn6122_1>,
-				<&q6_qcn6122_etr_1>, <&q6_qcn6122_caldb_1>;
-	#endif
-
-	};
-
-	q6_wcss_pd3: remoteproc_pd3 {
-		compatible = "qcom,ipq5018-wcss-pcie-mpd";
-		firmware = "IPQ5018/q6_fw.mdt";
-		m3_firmware = "qcn6122/m3_fw.mdt";
-		interrupts-extended = <&wcss_smp2p_in 24 0>,
-					<&wcss_smp2p_in 25 0>,
-					<&wcss_smp2p_in 28 0>,
-					<&wcss_smp2p_in 27 0>;
-		interrupt-names = "fatal",
-					"ready",
-					"spawn-ack",
-					"stop-ack";
-
-		qcom,smem-states = <&wcss_smp2p_out 24>,
-					<&wcss_smp2p_out 25>,
-					<&wcss_smp2p_out 26>;
-		qcom,smem-state-names = "shutdown",
-					"stop",
-					"spawn";
-	#ifdef	__IPQ_MEM_PROFILE_256_MB__
-		memory-region = <&q6_qcn6122_data2>, <&m3_dump_qcn6122_2>,
-				<&q6_qcn6122_etr_2>;
-	#else
-		memory-region = <&q6_qcn6122_data2>, <&m3_dump_qcn6122_2>,
-				<&q6_qcn6122_etr_2>, <&q6_qcn6122_caldb_2>;
-	#endif
-	};
-};
-
-&wifi0 {
-	/* IPQ5018 */
-	qcom,multipd_arch;
-	qcom,rproc = <&q6_wcss_pd1>;
-	qcom,userpd-subsys-name = "q6v5_wcss_userpd1";
-#ifdef __IPQ_MEM_PROFILE_256_MB__
-	qcom,tgt-mem-mode = <2>;
-#else
-	qcom,tgt-mem-mode = <1>;
-#endif
-	qcom,board_id = <0x23>;
-#ifdef __CNSS2__
-	qcom,bdf-addr = <0x4C400000 0x4C400000 0x4C400000 0x0 0x0>;
-	qcom,caldb-addr = <0x4D300000 0x4D300000 0 0 0>;
-	qcom,caldb-size = <0x200000>;
-	mem-region = <&q6_ipq5018_data>;
-#else
-	memory-region = <&q6_ipq5018_data>;
-#endif
-	status = "ok";
-};
-
-&wifi1 {
-	/* QCN6122 5G */
-	qcom,multipd_arch;
-	qcom,userpd-subsys-name = "q6v5_wcss_userpd3";
-	qcom,rproc = <&q6_wcss_pd3>;
-#ifdef __IPQ_MEM_PROFILE_256_MB__
-	qcom,tgt-mem-mode = <2>;
-#else
-	qcom,tgt-mem-mode = <1>;
-#endif
-	qcom,board_id = <0x60>;
-#ifdef __CNSS2__
-	qcom,bdf-addr = <0x4E900000 0x4E900000 0x4E200000 0x0 0x0>;
-	qcom,caldb-addr = <0x4F800000 0x4F800000 0 0 0>;
-	qcom,caldb-size = <0x500000>;
-	mem-region = <&q6_qcn6122_data2>;
-#else
-	memory-region = <&q6_qcn6122_data2>;
-#endif
-	status = "ok";
-};
-
-&dwc_0 {
-       /delete-property/ #phy-cells;
-       /delete-property/ phys;
-       /delete-property/ phy-names;
-};
-
-&hs_m31phy_0 {
-       status = "ok";
-};
-
-&eud {
-	status = "ok";
-};
-
-&pcie_x1 {
-	perst-gpio = <&tlmm 18 GPIO_ACTIVE_LOW>;
-};
-
-&pcie_x2 {
-	perst-gpio = <&tlmm 15 GPIO_ACTIVE_LOW>;
-};
-
-&pcie_x1_rp {
-	status = "disabled";
-
-	mhi_0: qcom,mhi@0 {
-		reg = <0 0 0 0 0 >;
-	};
-};
-
-&pcie_x2_rp {
-	status = "disabled";
-
-	mhi_1: qcom,mhi@1 {
-		reg = <0 0 0 0 0 >;
-
-	};
-};

feeds/ipq807x_v5.4/ipq50xx/files/arch/arm64/boot/dts/qcom/qcom-ipq5018-rap630c-311g.dts

@@ -1,915 +0,0 @@
-/dts-v1/;
-/* Copyright (c) 2018-2021, The Linux Foundation. All rights reserved.
- *
- * Copyright (c) 2021 Qualcomm Innovation Center, Inc. All rights reserved.
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- */
-
-#include "ipq5018.dtsi"
-
-/ {
-	#address-cells = <0x2>;
-	#size-cells = <0x2>;
-	model = "Sonicfi RAP630C-311G";
-	compatible = "sonicfi,rap630c-311g", "qcom,ipq5018-mp03.5", "qcom,ipq5018";
-	interrupt-parent = <&intc>;
-
-	aliases {
-		sdhc1 = &sdhc_1; /* SDC1 eMMC slot */
-		serial0 = &blsp1_uart1;
-		serial1 = &blsp1_uart2;
-		ethernet0 = "/soc/dp1";
-		ethernet1 = "/soc/dp2";
-	};
-
-	chosen {
-		bootargs = "console=ttyMSM0,115200,n8 rw init=/init";
-		bootargs-append = " swiotlb=1 coherent_pool=2M";
-		stdout-path = "serial0";
-	};
-
-	reserved-memory {
-	#ifdef __IPQ_MEM_PROFILE_256_MB__
-	/*                   256 MB Profile
-	 * +==========+==============+=========================+
-	 * |          |              |                         |
-	 * |  Region  | Start Offset |          Size           |
-	 * |          |              |                         |
-	 * +----------+--------------+-------------------------+
-	 * |    NSS   |  0x40000000  |           8MB           |
-	 * +----------+--------------+-------------------------+
-	 * |   Linux  |  0x40800000  | Depends on total memory |
-	 * +----------+--------------+-------------------------+
-	 * |   uboot  |  0x4A600000  |           4MB           |
-	 * +----------+--------------+-------------------------+
-	 * |    SBL   |  0x4AA00000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * |   smem   |  0x4AB00000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * |    TZ    |  0x4AC00000  |           4MB           |
-	 * +----------+--------------+-------------------------+
-	 * |    Q6    |              |                         |
-	 * |   code/  |  0x4B000000  |          20MB           |
-	 * |   data   |              |                         |
-	 * +----------+--------------+-------------------------+
-	 * |  IPQ5018 |              |                         |
-	 * |   data   |  0x4C400000  |          13MB           |
-	 * +----------+--------------+-------------------------+
-	 * |  IPQ5018 |              |                         |
-	 * |  M3 Dump |  0x4D100000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * |  IPQ5018 |              |                         |
-	 * |   QDSS   |  0x4D200000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_1|              |                         |
-	 * |   data   |  0x4D300000  |          13MB           |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_1|              |                         |
-	 * |  M3 Dump |  0x4E000000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_1|              |                         |
-	 * |   QDSS   |  0x4E100000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_2|              |                         |
-	 * |   data   |  0x4E200000  |          13MB           |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_2|              |                         |
-	 * |  M3 Dump |  0x4EF00000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_2|              |                         |
-	 * |   QDSS   |  0x4F000000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * |                                                   |
-	 * |            Rest of the memory for Linux           |
-	 * |                                                   |
-	 * +===================================================+
-	 */
-		q6_mem_regions: q6_mem_regions@4B000000 {
-			no-map;
-			reg = <0x0 0x4B000000 0x0 0x4100000>;
-		};
-
-		q6_code_data: q6_code_data@4B000000 {
-			no-map;
-			reg = <0x0 0x4B000000 0x0 0x1400000>;
-		};
-
-		q6_ipq5018_data: q6_ipq5018_data@4C400000 {
-			no-map;
-			reg = <0x0 0x4C400000 0x0 0xD00000>;
-		};
-
-		m3_dump: m3_dump@4D100000 {
-			no-map;
-			reg = <0x0 0x4D100000 0x0 0x100000>;
-		};
-
-		q6_etr_region: q6_etr_dump@4D200000 {
-			no-map;
-			reg = <0x0 0x4D200000 0x0 0x100000>;
-		};
-
-		q6_qcn6122_data1: q6_qcn6122_data1@4D300000 {
-			no-map;
-			reg = <0x0 0x4D300000 0x0 0xD00000>;
-		};
-
-		m3_dump_qcn6122_1: m3_dump_qcn6122_1@4E000000 {
-			no-map;
-			reg = <0x0 0x4E000000 0x0 0x100000>;
-		};
-
-		q6_qcn6122_etr_1: q6_qcn6122_etr_1@4E100000 {
-			no-map;
-			reg = <0x0 0x4E100000 0x0 0x100000>;
-		};
-
-		q6_qcn6122_data2: q6_qcn6122_data2@4E200000 {
-			no-map;
-			reg = <0x0 0x4E200000 0x0 0xD00000>;
-		};
-
-		m3_dump_qcn6122_2: m3_dump_qcn6122_2@4EF00000 {
-			no-map;
-			reg = <0x0 0x4EF00000 0x0 0x100000>;
-		};
-
-		q6_qcn6122_etr_2: q6_qcn6122_etr_2@4F000000 {
-			no-map;
-			reg = <0x0 0x4F000000 0x0 0x100000>;
-		};
-	#else
-	/*                 512MB/1GB Profiles
-	 * +==========+==============+=========================+
-	 * |          |              |                         |
-	 * |  Region  | Start Offset |          Size           |
-	 * |          |              |                         |
-	 * +----------+--------------+-------------------------+
-	 * |    NSS   |  0x40000000  |          16MB           |
-	 * +----------+--------------+-------------------------+
-	 * |   Linux  |  0x41000000  | Depends on total memory |
-	 * +----------+--------------+-------------------------+
-	 * |   uboot  |  0x4A600000  |           4MB           |
-	 * +----------+--------------+-------------------------+
-	 * |    SBL   |  0x4AA00000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * |   smem   |  0x4AB00000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * |    TZ    |  0x4AC00000  |           4MB           |
-	 * +----------+--------------+-------------------------+
-	 * |    Q6    |              |                         |
-	 * |   code/  |  0x4B000000  |          20MB           |
-	 * |   data   |              |                         |
-	 * +----------+--------------+-------------------------+
-	 * |  IPQ5018 |              |                         |
-	 * |   data   |  0x4C400000  |          13MB           |
-	 * +----------+--------------+-------------------------+
-	 * |  IPQ5018 |              |                         |
-	 * |  M3 Dump |  0x4D100000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * |  IPQ5018 |              |                         |
-	 * |   QDSS   |  0x4D200000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * |  IPQ5018 |              |                         |
-	 * |  Caldb   |  0x4D300000  |           2MB           |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_1|              |                         |
-	 * |   data   |  0x4D500000  |          13MB           |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_1|              |                         |
-	 * |  M3 Dump |  0x4E200000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_1|              |                         |
-	 * |   QDSS   |  0x4E300000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_1|              |                         |
-	 * |  Caldb   |  0x4E400000  |           5MB           |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_2|              |                         |
-	 * |   data   |  0x4E900000  |          13MB           |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_2|              |                         |
-	 * |  M3 Dump |  0x4F600000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_2|              |                         |
-	 * |   QDSS   |  0x4F700000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_2|              |                         |
-	 * |  Caldb   |  0x4F800000  |           5MB           |
-	 * +----------+--------------+-------------------------+
-	 * |                                                   |
-	 * |            Rest of the memory for Linux           |
-	 * |                                                   |
-	 * +===================================================+
-	 */
-		q6_mem_regions: q6_mem_regions@4B000000 {
-			no-map;
-			reg = <0x0 0x4B000000 0x0 0x4D00000>;
-		};
-
-		q6_code_data: q6_code_data@4B000000 {
-			no-map;
-			reg = <0x0 0x4B000000 0x0 01400000>;
-		};
-
-		q6_ipq5018_data: q6_ipq5018_data@4C400000 {
-			no-map;
-			reg = <0x0 0x4C400000 0x0 0xD00000>;
-		};
-
-		m3_dump: m3_dump@4D100000 {
-			no-map;
-			reg = <0x0 0x4D100000 0x0 0x100000>;
-		};
-
-		q6_etr_region: q6_etr_dump@4D200000 {
-			no-map;
-			reg = <0x0 0x4D200000 0x0 0x100000>;
-		};
-
-		q6_caldb_region: q6_caldb_region@4D300000 {
-			no-map;
-			reg = <0x0 0x4D300000 0x0 0x200000>;
-		};
-
-		q6_qcn6122_data1: q6_qcn6122_data1@4D500000 {
-			no-map;
-			reg = <0x0 0x4D500000 0x0 0xD00000>;
-		};
-
-		m3_dump_qcn6122_1: m3_dump_qcn6122_1@4E200000 {
-			no-map;
-			reg = <0x0 0x4E200000 0x0 0x100000>;
-		};
-
-		q6_qcn6122_etr_1: q6_qcn6122_etr_1@4E300000 {
-			no-map;
-			reg = <0x0 0x4E300000 0x0 0x100000>;
-		};
-
-		q6_qcn6122_caldb_1: q6_qcn6122_caldb_1@4E400000 {
-			no-map;
-			reg = <0x0 0x4E400000 0x0 0x500000>;
-		};
-
-		q6_qcn6122_data2: q6_qcn6122_data2@4E900000 {
-			no-map;
-			reg = <0x0 0x4E900000 0x0 0xD00000>;
-		};
-
-		m3_dump_qcn6122_2: m3_dump_qcn6122_2@4F600000 {
-			no-map;
-			reg = <0x0 0x4F600000 0x0 0x100000>;
-		};
-
-		q6_qcn6122_etr_2: q6_qcn6122_etr_2@4F700000 {
-			no-map;
-			reg = <0x0 0x4F700000 0x0 0x100000>;
-		};
-
-		q6_qcn6122_caldb_2: q6_qcn6122_caldb_2@4F800000 {
-			no-map;
-			reg = <0x0 0x4F800000 0x0 0x500000>;
-		};
-
-	#endif
-	};
-
-	soc {
-		serial@78af000 {
-			status = "ok";
-		};
-
-		blsp1_uart2: serial@78b0000 {
-			pinctrl-0 = <&blsp1_uart_pins>;
-			pinctrl-names = "default";
-		};
-
-		qpic_bam: dma@7984000{
-			status = "ok";
-		};
-
-		nand: qpic-nand@79b0000 {
-			pinctrl-0 = <&qspi_nand_pins>;
-			pinctrl-names = "default";
-			status = "ok";
-		};
-
-		spi_0: spi@78b5000 { /* BLSP1 QUP0 */
-			pinctrl-0 = <&blsp0_spi_pins>;
-			pinctrl-names = "default";
-			cs-select = <0>;
-			status = "ok";
-
-			m25p80@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0>;
-				compatible = "n25q128a11";
-				linux,modalias = "m25p80", "n25q128a11";
-				spi-max-frequency = <50000000>;
-				use-default-sizes;
-			};
-		};
-
-		mdio0: mdio@88000 {
-			status = "ok";
-
-			ethernet-phy@0 {
-				reg = <7>;
-			};
-		};
-
-		mdio1: mdio@90000 {
-			status = "disabled";
-			pinctrl-0 = <&mdio1_pins>;
-			pinctrl-names = "default";
-			phy-reset-gpio = <&tlmm 39 0>;
-
-			ethernet-phy@0 {
-				reg = <28>;
-			};
-		};
-
-		ess-instance {
-			num_devices = <0x1>;
-			ess-switch@0x39c00000 {
-				switch_mac_mode = <0xf>; /* mac mode for uniphy instance*/
-				cmnblk_clk = "internal_96MHz"; /* cmnblk clk*/
-				qcom,port_phyinfo {
-					port@0 {
-						port_id = <1>;
-						phy_address = <7>;
-						mdiobus = <&mdio0>;
-					};
-					/*
-					port@1 {
-						port_id = <2>;
-						phy_address = <0x1c>;
-						mdiobus = <&mdio1>;
-						port_mac_sel = "QGMAC_PORT";
-					};
-					*/
-				};
-				
-				led_source@0 {
-					source = <0>;
-					mode = "normal";
-					speed = "all";
-					blink_en = "enable";
-					active = "high";
-				};
-				
-			};
-		};
-
-		dp1 {
-			device_type = "network";
-			compatible = "qcom,nss-dp";
-			clocks = <&gcc GCC_SNOC_GMAC0_AXI_CLK>;
-			clock-names = "nss-snoc-gmac-axi-clk";
-			qcom,id = <1>;
-			reg = <0x39C00000 0x10000>;
-			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
-			qcom,mactype = <2>;
-			qcom,link-poll = <1>;
-			qcom,phy-mdio-addr = <7>;
-			mdio-bus = <&mdio0>;
-			local-mac-address = [000000000000];
-			phy-mode = "sgmii";
-			qcom,rx-page-mode = <0>;
-		};
-		/*
-		dp2 {
-			device_type = "network";
-			compatible = "qcom,nss-dp";
-			clocks = <&gcc GCC_SNOC_GMAC1_AXI_CLK>;
-			clock-names = "nss-snoc-gmac-axi-clk";
-			qcom,id = <2>;
-			reg = <0x39D00000 0x10000>;
-			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
-			qcom,mactype = <2>;
-			qcom,link-poll = <1>;
-			qcom,phy-mdio-addr = <28>;
-			mdio-bus = <&mdio1>;
-			local-mac-address = [000000000000];
-			phy-mode = "sgmii";
-			qcom,rx-page-mode = <0>;
-		};
-		*/
-
-		nss-macsec1 {
-			compatible = "qcom,nss-macsec";
-			phy_addr = <0x1c>;
-			mdiobus = <&mdio1>;
-		};
-	};
-
-	qcom,test@0 {
-		status = "ok";
-	};
-
-	thermal-zones {
-		status = "ok";
-	};
-};
-
-&tlmm {
-	pinctrl-0 = <&blsp0_uart_pins &phy_led_pins>;
-	pinctrl-names = "default";
-
-	blsp0_uart_pins: blsp0_uart_pins {
-		blsp0_uart_rx_tx {
-			pins = "gpio20", "gpio21";
-			function = "blsp0_uart0";
-			bias-disable;
-		};
-	};
-
-	blsp1_uart_pins: blsp1_uart_pins {
-		blsp1_uart_rx_tx {
-			pins = "gpio23", "gpio25", "gpio24", "gpio26";
-			function = "blsp1_uart2";
-			bias-disable;
-		};
-	};
-
-	blsp0_spi_pins: blsp0_spi_pins {
-		mux {
-			pins = "gpio10", "gpio11", "gpio12", "gpio13";
-			function = "blsp0_spi";
-			drive-strength = <2>;
-			bias-disable;
-		};
-	};
-
-	qspi_nand_pins: qspi_nand_pins {
-		qspi_clock {
-			pins = "gpio9";
-			function = "qspi_clk";
-			drive-strength = <8>;
-			bias-disable;
-		};
-
-		qspi_cs {
-			pins = "gpio8";
-			function = "qspi_cs";
-			drive-strength = <8>;
-			bias-disable;
-		};
-
-		qspi_data {
-			pins = "gpio4", "gpio5", "gpio6", "gpio7";
-			function = "qspi_data";
-			drive-strength = <8>;
-			bias-disable;
-		};
-	};
-
-	mdio1_pins: mdio_pinmux {
-		mux_0 {
-			pins = "gpio36";
-			function = "mdc";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
-
-		mux_1 {
-			pins = "gpio37";
-			function = "mdio";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
-	};
-
-	phy_led_pins: phy_led_pins {
-		gephy_led_pin {
-			pins = "gpio46";
-			function = "led0";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-	};
-
-	i2c_pins: i2c_pins {
-		i2c_scl {
-			pins = "gpio25";
-			function = "blsp2_i2c1";
-			drive-strength = <8>;
-			bias-disable;
-		};
-
-		i2c_sda {
-			pins = "gpio26";
-			function = "blsp2_i2c1";
-			drive-strength = <8>;
-			bias-disable;
-		};
-	};
-
-	button_pins: button_pins {
-		reset_button {
-			pins = "gpio28";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
-	};
-
-	audio_pins: audio_pinmux {
-		mux_1 {
-			pins = "gpio24";
-			function = "audio_rxbclk";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-
-		mux_2 {
-			pins = "gpio25";
-			function = "audio_rxfsync";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-
-		mux_3 {
-			pins = "gpio26";
-			function = "audio_rxd";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-
-		mux_4 {
-			pins = "gpio27";
-			function = "audio_txmclk";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-
-		mux_5 {
-			pins = "gpio28";
-			function = "audio_txbclk";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-
-		mux_6 {
-			pins = "gpio29";
-			function = "audio_txfsync";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-
-		mux_7 {
-			pins = "gpio30";
-			function = "audio_txd";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-	};
-	leds_pins: leds_pinmux {
-		sys_blue {
-			pins = "gpio30";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
-		sys_red {
-			pins = "gpio36";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-disable;
-		};
-		sys_green {
-			pins = "gpio37";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-disable;
-		};
-	};
-};
-
-&soc {
-	gpio_keys {
-		compatible = "gpio-keys";
-		pinctrl-0 = <&button_pins>;
-		pinctrl-names = "default";
-
-		button@1 {
-			label = "reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&tlmm 28 GPIO_ACTIVE_LOW>;
-			linux,input-type = <1>;
-			debounce-interval = <60>;
-		};
-	};
-	gpio_leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&leds_pins>;
-		pinctrl-names = "default";
-
-		led@30 {
-			label = "sys:blue";
-			gpios = <&tlmm 30 GPIO_ACTIVE_HIGH>;  /* GPIO_30 */
-			default-state="on";
-		/*	linux,default-trigger = "timer";
-			active-delay = <700>;
-			inactive-delay = <700>;
-			default-state="on";		*/
-		};
-		led@36 {
-			label = "sys:red";
-			gpios = <&tlmm 36 GPIO_ACTIVE_HIGH>;  /* GPIO_36 */
-			default-state="off";
-		/*	linux,default-trigger = "timer";
-			active-delay = <700>;
-			inactive-delay = <700>;
-			default-state="on";		*/
-		};
-		led@37 {
-			label = "sys:green";
-			gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>;  /* GPIO_37 */
-			default-state="off";
-		/*	linux,default-trigger = "timer";
-			active-delay = <700>;
-			inactive-delay = <700>;
-			default-state="on";		*/
-		};
-	};
-
-};
-
-&q6v5_wcss {
-	compatible = "qcom,ipq5018-q6-mpd";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	ranges;
-	firmware = "IPQ5018/q6_fw.mdt";
-	reg = <0x0cd00000 0x4040>,
-		<0x1938000 0x8>,
-		<0x193d204 0x4>;
-	reg-names = "qdsp6",
-			"tcsr-msip",
-			"tcsr-q6";
-	resets = <&gcc GCC_WCSSAON_RESET>,
-			<&gcc GCC_WCSS_Q6_BCR>;
-
-	reset-names = "wcss_aon_reset",
-			"wcss_q6_reset";
-
-	clocks = <&gcc GCC_Q6_AXIS_CLK>,
-		<&gcc GCC_WCSS_ECAHB_CLK>,
-		<&gcc GCC_Q6_AXIM_CLK>,
-		<&gcc GCC_Q6_AXIM2_CLK>,
-		<&gcc GCC_Q6_AHB_CLK>,
-		<&gcc GCC_Q6_AHB_S_CLK>,
-		<&gcc GCC_WCSS_AXI_S_CLK>;
-	clock-names = "gcc_q6_axis_clk",
-		"gcc_wcss_ecahb_clk",
-		"gcc_q6_axim_clk",
-		"gcc_q6_axim2_clk",
-		"gcc_q6_ahb_clk",
-		"gcc_q6_ahb_s_clk",
-		"gcc_wcss_axi_s_clk";
-
-	#ifdef __IPQ_MEM_PROFILE_256_MB__
-		memory-region = <&q6_mem_regions>, <&q6_etr_region>;
-	#else
-		memory-region = <&q6_mem_regions>, <&q6_etr_region>,
-				<&q6_caldb_region>;
-	#endif
-
-	qcom,rproc = <&q6v5_wcss>;
-	qcom,bootargs_smem = <507>;
-	boot-args = <0x1 0x4 0x3 0x0F 0x0 0x0>,
-			<0x2 0x4 0x2 0x12 0x0 0x0>;
-	status = "ok";
-	q6_wcss_pd1: remoteproc_pd1@4ab000 {
-		compatible = "qcom,ipq5018-wcss-ahb-mpd";
-		reg = <0x4ab000 0x20>;
-		reg-names = "rmb";
-		firmware = "IPQ5018/q6_fw.mdt";
-		m3_firmware = "IPQ5018/m3_fw.mdt";
-		interrupts-extended = <&wcss_smp2p_in 8 0>,
-					<&wcss_smp2p_in 9 0>,
-					<&wcss_smp2p_in 12 0>,
-					<&wcss_smp2p_in 11 0>;
-		interrupt-names = "fatal",
-					"ready",
-					"spawn-ack",
-					"stop-ack";
-
-		resets = <&gcc GCC_WCSSAON_RESET>,
-				<&gcc GCC_WCSS_BCR>,
-				<&gcc GCC_CE_BCR>;
-		reset-names = "wcss_aon_reset",
-				"wcss_reset",
-				"ce_reset";
-
-		clocks = <&gcc GCC_WCSS_AHB_S_CLK>,
-				<&gcc GCC_WCSS_ACMT_CLK>,
-				<&gcc GCC_WCSS_AXI_M_CLK>;
-		clock-names = "gcc_wcss_ahb_s_clk",
-					"gcc_wcss_acmt_clk",
-					"gcc_wcss_axi_m_clk";
-
-		qcom,halt-regs = <&tcsr_q6_block 0xa000 0xd000 0x0>;
-
-		qcom,smem-states = <&wcss_smp2p_out 8>,
-					<&wcss_smp2p_out 9>,
-					<&wcss_smp2p_out 10>;
-		qcom,smem-state-names = "shutdown",
-					"stop",
-					"spawn";
-	#ifdef __IPQ_MEM_PROFILE_256_MB__
-		memory-region = <&q6_ipq5018_data>, <&m3_dump>,
-				<&q6_etr_region>;
-	#else
-		memory-region = <&q6_ipq5018_data>, <&m3_dump>,
-				<&q6_etr_region>, <&q6_caldb_region>;
-	#endif
-
-	};
-
-	q6_wcss_pd2: remoteproc_pd2 {
-		compatible = "qcom,ipq5018-wcss-pcie-mpd";
-		firmware = "IPQ5018/q6_fw.mdt";
-		m3_firmware = "qcn6122/m3_fw.mdt";
-		interrupts-extended = <&wcss_smp2p_in 16 0>,
-					<&wcss_smp2p_in 17 0>,
-					<&wcss_smp2p_in 20 0>,
-					<&wcss_smp2p_in 19 0>;
-		interrupt-names = "fatal",
-					"ready",
-					"spawn-ack",
-					"stop-ack";
-
-		qcom,smem-states = <&wcss_smp2p_out 16>,
-					<&wcss_smp2p_out 17>,
-					<&wcss_smp2p_out 18>;
-		qcom,smem-state-names = "shutdown",
-					"stop",
-					"spawn";
-	#ifdef __IPQ_MEM_PROFILE_256_MB__
-		memory-region = <&q6_qcn6122_data1>, <&m3_dump_qcn6122_1>,
-				<&q6_qcn6122_etr_1>;
-	#else
-		memory-region = <&q6_qcn6122_data1>, <&m3_dump_qcn6122_1>,
-				<&q6_qcn6122_etr_1>, <&q6_qcn6122_caldb_1>;
-	#endif
-
-	};
-
-	q6_wcss_pd3: remoteproc_pd3 {
-		compatible = "qcom,ipq5018-wcss-pcie-mpd";
-		firmware = "IPQ5018/q6_fw.mdt";
-		interrupts-extended = <&wcss_smp2p_in 24 0>,
-					<&wcss_smp2p_in 25 0>,
-					<&wcss_smp2p_in 28 0>,
-					<&wcss_smp2p_in 27 0>;
-		interrupt-names = "fatal",
-					"ready",
-					"spawn-ack",
-					"stop-ack";
-
-		qcom,smem-states = <&wcss_smp2p_out 24>,
-					<&wcss_smp2p_out 25>,
-					<&wcss_smp2p_out 26>;
-		qcom,smem-state-names = "shutdown",
-					"stop",
-					"spawn";
-	#ifdef	__IPQ_MEM_PROFILE_256_MB__
-		memory-region = <&q6_qcn6122_data2>, <&m3_dump_qcn6122_2>,
-				<&q6_qcn6122_etr_2>;
-	#else
-		memory-region = <&q6_qcn6122_data2>, <&m3_dump_qcn6122_2>,
-				<&q6_qcn6122_etr_2>, <&q6_qcn6122_caldb_2>;
-	#endif
-	};
-};
-
-&i2c_0 {
-	pinctrl-0 = <&i2c_pins>;
-	pinctrl-names = "default";
-	status = "disabled";
-};
-
-&wifi0 {
-	/* IPQ5018 */
-	qcom,multipd_arch;
-	qcom,rproc = <&q6_wcss_pd1>;
-	qcom,userpd-subsys-name = "q6v5_wcss_userpd1";
-#ifdef __IPQ_MEM_PROFILE_256_MB__
-	qcom,tgt-mem-mode = <2>;
-#else
-	qcom,tgt-mem-mode = <1>;
-#endif
-	qcom,board_id = <0x24>;
-#ifdef __CNSS2__
-	qcom,bdf-addr = <0x4C400000 0x4C400000 0x4C400000 0x0 0x0>;
-	qcom,caldb-addr = <0x4D300000 0x4D300000 0 0 0 0>;
-	qcom,caldb-size = <0x200000>;
-	mem-region = <&q6_ipq5018_data>;
-1235
-#else
-	memory-region = <&q6_ipq5018_data>;
-#endif
-	status = "ok";
-};
-
-&wifi1 {
-	/* QCN6122 5G */
-	qcom,multipd_arch;
-	qcom,userpd-subsys-name = "q6v5_wcss_userpd3";
-	qcom,rproc = <&q6_wcss_pd3>;
-#ifdef __IPQ_MEM_PROFILE_256_MB__
-	qcom,tgt-mem-mode = <2>;
-#else
-	qcom,tgt-mem-mode = <1>;
-#endif
-	qcom,board_id = <0x60>;
-#ifdef __CNSS2__
-	qcom,bdf-addr = <0x4E900000 0x4E900000 0x4E200000 0x0 0x0>;
-	qcom,caldb-addr = <0x4F800000 0x4F800000 0 0 0>;
-	qcom,caldb-size = <0x500000>;
-	mem-region = <&q6_qcn6122_data2>;
-#else
-	memory-region = <&q6_qcn6122_data2>;
-#endif
-	status = "ok";
-};
-
-&wifi2 {
-	/* QCN6122 6G */
-	qcom,multipd_arch;
-	qcom,userpd-subsys-name = "q6v5_wcss_userpd3";
-#ifdef __IPQ_MEM_PROFILE_256_MB__
-	qcom,tgt-mem-mode = <2>;
-#else
-	qcom,tgt-mem-mode = <1>;
-#endif
-	qcom,board_id = <0xb0>;
-	qcom,bdf-addr = <0x4ED00000 0x4ED00000 0x4E400000 0x0 0x0>;
-#ifdef __CNSS2__
-	qcom,caldb-addr = <0x4FF00000 0x4FF00000 0 0 0>;
-#else
-	qcom,caldb-addr = <0x4FF00000>;
-	m3-dump-addr = <0x4FD00000>;
-#endif
-	qcom,caldb-size = <0x500000>;
-	status = "disabled";
-};
-
-&usb3 {
-       status = "ok";
-       device-power-gpio = <&tlmm 24 1>;
-};
-
-&dwc_0 {
-       /delete-property/ #phy-cells;
-       /delete-property/ phys;
-       /delete-property/ phy-names;
-};
-
-&hs_m31phy_0 {
-       status = "ok";
-};
-
-&eud {
-	status = "ok";
-};
-
-&pcie_x1 {
-	perst-gpio = <&tlmm 18 GPIO_ACTIVE_LOW>;
-};
-
-&pcie_x2 {
-	perst-gpio = <&tlmm 15 GPIO_ACTIVE_LOW>;
-};
-
-&pcie_x1_rp {
-	status = "disabled";
-
-	mhi_0: qcom,mhi@0 {
-		reg = <0 0 0 0 0 >;
-	};
-};
-
-&pcie_x2_rp {
-	status = "disabled";
-
-	mhi_1: qcom,mhi@1 {
-		reg = <0 0 0 0 0 >;
-
-	};
-};

feeds/ipq807x_v5.4/ipq50xx/files/arch/arm64/boot/dts/qcom/qcom-ipq5018-rap630w-311g.dts

@@ -1,981 +0,0 @@
-/dts-v1/;
-/* Copyright (c) 2018-2021, The Linux Foundation. All rights reserved.
- *
- * Copyright (c) 2021 Qualcomm Innovation Center, Inc. All rights reserved.
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- */
-
-#include "ipq5018.dtsi"
-
-/ {
-	#address-cells = <0x2>;
-	#size-cells = <0x2>;
-	model = "Sonicfi RAP630W-311G";
-	compatible = "sonicfi,rap630w-311g", "qcom,ipq5018-mp03.5", "qcom,ipq5018";
-	interrupt-parent = <&intc>;
-
-	aliases {
-		sdhc1 = &sdhc_1; /* SDC1 eMMC slot */
-		serial0 = &blsp1_uart1;
-		serial1 = &blsp1_uart2;
-		ethernet0 = "/soc/dp1";
-		ethernet1 = "/soc/dp2";
-	};
-
-	chosen {
-		bootargs = "console=ttyMSM0,115200,n8 rw init=/init";
-		bootargs-append = " swiotlb=1 coherent_pool=2M";
-		stdout-path = "serial0";
-	};
-
-	reserved-memory {
-	#ifdef __IPQ_MEM_PROFILE_256_MB__
-	/*                   256 MB Profile
-	 * +==========+==============+=========================+
-	 * |          |              |                         |
-	 * |  Region  | Start Offset |          Size           |
-	 * |          |              |                         |
-	 * +----------+--------------+-------------------------+
-	 * |    NSS   |  0x40000000  |           8MB           |
-	 * +----------+--------------+-------------------------+
-	 * |   Linux  |  0x40800000  | Depends on total memory |
-	 * +----------+--------------+-------------------------+
-	 * |   uboot  |  0x4A600000  |           4MB           |
-	 * +----------+--------------+-------------------------+
-	 * |    SBL   |  0x4AA00000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * |   smem   |  0x4AB00000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * |    TZ    |  0x4AC00000  |           4MB           |
-	 * +----------+--------------+-------------------------+
-	 * |    Q6    |              |                         |
-	 * |   code/  |  0x4B000000  |          20MB           |
-	 * |   data   |              |                         |
-	 * +----------+--------------+-------------------------+
-	 * |  IPQ5018 |              |                         |
-	 * |   data   |  0x4C400000  |          13MB           |
-	 * +----------+--------------+-------------------------+
-	 * |  IPQ5018 |              |                         |
-	 * |  M3 Dump |  0x4D100000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * |  IPQ5018 |              |                         |
-	 * |   QDSS   |  0x4D200000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_1|              |                         |
-	 * |   data   |  0x4D300000  |          13MB           |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_1|              |                         |
-	 * |  M3 Dump |  0x4E000000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_1|              |                         |
-	 * |   QDSS   |  0x4E100000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_2|              |                         |
-	 * |   data   |  0x4E200000  |          13MB           |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_2|              |                         |
-	 * |  M3 Dump |  0x4EF00000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_2|              |                         |
-	 * |   QDSS   |  0x4F000000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * |                                                   |
-	 * |            Rest of the memory for Linux           |
-	 * |                                                   |
-	 * +===================================================+
-	 */
-		q6_mem_regions: q6_mem_regions@4B000000 {
-			no-map;
-			reg = <0x0 0x4B000000 0x0 0x4100000>;
-		};
-
-		q6_code_data: q6_code_data@4B000000 {
-			no-map;
-			reg = <0x0 0x4B000000 0x0 0x1400000>;
-		};
-
-		q6_ipq5018_data: q6_ipq5018_data@4C400000 {
-			no-map;
-			reg = <0x0 0x4C400000 0x0 0xD00000>;
-		};
-
-		m3_dump: m3_dump@4D100000 {
-			no-map;
-			reg = <0x0 0x4D100000 0x0 0x100000>;
-		};
-
-		q6_etr_region: q6_etr_dump@4D200000 {
-			no-map;
-			reg = <0x0 0x4D200000 0x0 0x100000>;
-		};
-
-		q6_qcn6122_data1: q6_qcn6122_data1@4D300000 {
-			no-map;
-			reg = <0x0 0x4D300000 0x0 0xD00000>;
-		};
-
-		m3_dump_qcn6122_1: m3_dump_qcn6122_1@4E000000 {
-			no-map;
-			reg = <0x0 0x4E000000 0x0 0x100000>;
-		};
-
-		q6_qcn6122_etr_1: q6_qcn6122_etr_1@4E100000 {
-			no-map;
-			reg = <0x0 0x4E100000 0x0 0x100000>;
-		};
-
-		q6_qcn6122_data2: q6_qcn6122_data2@4E200000 {
-			no-map;
-			reg = <0x0 0x4E200000 0x0 0xD00000>;
-		};
-
-		m3_dump_qcn6122_2: m3_dump_qcn6122_2@4EF00000 {
-			no-map;
-			reg = <0x0 0x4EF00000 0x0 0x100000>;
-		};
-
-		q6_qcn6122_etr_2: q6_qcn6122_etr_2@4F000000 {
-			no-map;
-			reg = <0x0 0x4F000000 0x0 0x100000>;
-		};
-	#else
-	/*                 512MB/1GB Profiles
-	 * +==========+==============+=========================+
-	 * |          |              |                         |
-	 * |  Region  | Start Offset |          Size           |
-	 * |          |              |                         |
-	 * +----------+--------------+-------------------------+
-	 * |    NSS   |  0x40000000  |          16MB           |
-	 * +----------+--------------+-------------------------+
-	 * |   Linux  |  0x41000000  | Depends on total memory |
-	 * +----------+--------------+-------------------------+
-	 * |   uboot  |  0x4A600000  |           4MB           |
-	 * +----------+--------------+-------------------------+
-	 * |    SBL   |  0x4AA00000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * |   smem   |  0x4AB00000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * |    TZ    |  0x4AC00000  |           4MB           |
-	 * +----------+--------------+-------------------------+
-	 * |    Q6    |              |                         |
-	 * |   code/  |  0x4B000000  |          20MB           |
-	 * |   data   |              |                         |
-	 * +----------+--------------+-------------------------+
-	 * |  IPQ5018 |              |                         |
-	 * |   data   |  0x4C400000  |          14MB           |
-	 * +----------+--------------+-------------------------+
-	 * |  IPQ5018 |              |                         |
-	 * |  M3 Dump |  0x4D200000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * |  IPQ5018 |              |                         |
-	 * |   QDSS   |  0x4D300000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * |  IPQ5018 |              |                         |
-	 * |  Caldb   |  0x4D400000  |           2MB           |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_1|              |                         |
-	 * |   data   |  0x4D600000  |          16MB           |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_1|              |                         |
-	 * |  M3 Dump |  0x4E600000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_1|              |                         |
-	 * |   QDSS   |  0x4E700000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_1|              |                         |
-	 * |  Caldb   |  0x4E800000  |           5MB           |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_2|              |                         |
-	 * |   data   |  0x4ED00000  |          16MB           |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_2|              |                         |
-	 * |  M3 Dump |  0x4FD00000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_2|              |                         |
-	 * |   QDSS   |  0x4FE00000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_2|              |                         |
-	 * |  Caldb   |  0x4FF00000  |           5MB           |
-	 * +----------+--------------+-------------------------+
-	 * |                                                   |
-	 * |            Rest of the memory for Linux           |
-	 * |                                                   |
-	 * +===================================================+
-	 */
-		q6_mem_regions: q6_mem_regions@4B000000 {
-			no-map;
-			reg = <0x0 0x4B000000 0x0 0x5400000>;
-		};
-
-		q6_code_data: q6_code_data@4B000000 {
-			no-map;
-			reg = <0x0 0x4B000000 0x0 01400000>;
-		};
-
-		q6_ipq5018_data: q6_ipq5018_data@4C400000 {
-			no-map;
-			reg = <0x0 0x4C400000 0x0 0xE00000>;
-		};
-
-		m3_dump: m3_dump@4D200000 {
-			no-map;
-			reg = <0x0 0x4D200000 0x0 0x100000>;
-		};
-
-		q6_etr_region: q6_etr_dump@4D300000 {
-			no-map;
-			reg = <0x0 0x4D300000 0x0 0x100000>;
-		};
-
-		q6_caldb_region: q6_caldb_region@4D400000 {
-			no-map;
-			reg = <0x0 0x4D400000 0x0 0x200000>;
-		};
-
-		q6_qcn6122_data1: q6_qcn6122_data1@4D600000 {
-			no-map;
-			reg = <0x0 0x4D600000 0x0 0x1000000>;
-		};
-
-		m3_dump_qcn6122_1: m3_dump_qcn6122_1@4E600000 {
-			no-map;
-			reg = <0x0 0x4E600000 0x0 0x100000>;
-		};
-
-		q6_qcn6122_etr_1: q6_qcn6122_etr_1@4E700000 {
-			no-map;
-			reg = <0x0 0x4E700000 0x0 0x100000>;
-		};
-
-		q6_qcn6122_caldb_1: q6_qcn6122_caldb_1@4E800000 {
-			no-map;
-			reg = <0x0 0x4E800000 0x0 0x500000>;
-		};
-
-		q6_qcn6122_data2: q6_qcn6122_data2@4E900000 {
-			no-map;
-			reg = <0x0 0x4ED00000 0x0 0x1000000>;
-		};
-
-		m3_dump_qcn6122_2: m3_dump_qcn6122_2@4FD00000 {
-			no-map;
-			reg = <0x0 0x4FD00000 0x0 0x100000>;
-		};
-
-		q6_qcn6122_etr_2: q6_qcn6122_etr_2@4FE00000 {
-			no-map;
-			reg = <0x0 0x4FE00000 0x0 0x100000>;
-		};
-
-		q6_qcn6122_caldb_2: q6_qcn6122_caldb_2@4FF00000 {
-			no-map;
-			reg = <0x0 0x4FF00000 0x0 0x500000>;
-		};
-
-	#endif
-	};
-
-	soc {
-		serial@78af000 {
-			status = "ok";
-		};
-/*
-		blsp1_uart2: serial@78b0000 {
-			pinctrl-0 = <&blsp1_uart_pins>;
-			pinctrl-names = "default";
-		};
-*/
-		qpic_bam: dma@7984000{
-			status = "ok";
-		};
-
-		nand: qpic-nand@79b0000 {
-			pinctrl-0 = <&qspi_nand_pins>;
-			pinctrl-names = "default";
-			status = "ok";
-		};
-
-		spi_0: spi@78b5000 { /* BLSP1 QUP0 */
-			pinctrl-0 = <&blsp0_spi_pins>;
-			pinctrl-names = "default";
-			cs-select = <0>;
-			status = "ok";
-
-			m25p80@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0>;
-				compatible = "n25q128a11";
-				linux,modalias = "m25p80", "n25q128a11";
-				spi-max-frequency = <50000000>;
-				use-default-sizes;
-			};
-		};
-
-		mdio0: mdio@88000 {
-			status = "ok";
-
-			ethernet-phy@0 {
-				reg = <7>;
-			};
-		};
-
-		mdio1: mdio@90000 {
-			status = "ok";
-			pinctrl-0 = <&mdio1_pins>;
-			pinctrl-names = "default";
-			phy-reset-gpio = <&tlmm 38 0>;
-
-			ethernet-phy@0 {
-				reg = <0>;
-			};
-
-			ethernet-phy@1 {
-				reg = <1>;
-			};
-
-			ethernet-phy@2 {
-				reg = <2>;
-			};
-
-			ethernet-phy@3 {
-				reg = <3>;
-			};
-
-			ethernet-phy@4 {
-				reg = <4>;
-			};
-		};
-
-		ess-instance {
-			num_devices = <0x2>;
-			ess-switch@0x39c00000 {
-				compatible = "qcom,ess-switch-ipq50xx";
-				device_id = <0>;
-				switch_mac_mode = <0xf>; /* mac mode for uniphy instance*/
-				cmnblk_clk = "internal_96MHz"; /* cmnblk clk*/
-				qcom,port_phyinfo {
-					port@0 {
-						port_id = <1>;
-						phy_address = <7>;
-					};
-					port@1 {
-						port_id = <2>;
-						forced-speed = <1000>;
-						forced-duplex = <1>;
-					};
-				};
-				led_source@0 {
-					source = <0>;
-					mode = "normal";
-					speed = "all";
-					blink_en = "enable";
-					active = "high";
-				};
-			};
-			ess-switch1@1 {
-				compatible = "qcom,ess-switch-qca83xx";
-				device_id = <1>;
-				switch_access_mode = "mdio";
-				mdio-bus = <&mdio1>;
-				reset_gpio = <&tlmm 0x26 0>;
-				switch_cpu_bmp = <0x40>;  /* cpu port bitmap (Port 6 GMAC) */
-				switch_lan_bmp = <0x3c>; /* lan port bitmap */
-				switch_wan_bmp = <0x0>;  /* wan port bitmap */
-				qca,ar8327-initvals = <
-						0x00004 0x7600000   /* PAD0_MODE */
-						0x00008 0x1000000   /* PAD5_MODE */
-						0x0000c 0x80        /* PAD6_MODE */
-						0x00010 0x2613a0    /* PORT6 FORCE MODE*/
-						0x000e4 0xaa545     /* MAC_POWER_SEL */
-						0x000e0 0xc74164de  /* SGMII_CTRL */
-						0x0007c 0x4e        /* PORT0_STATUS */
-						0x00094 0x4e        /* PORT6_STATUS */
-				>;
-				qcom,port_phyinfo {
-					port@0 {
-						port_id = <1>;
-						phy_address = <0>;
-					};
-					port@1 {
-						port_id = <2>;
-						phy_address = <1>;
-					};
-					port@2 {
-						port_id = <3>;
-						phy_address = <2>;
-					};
-					port@3 {
-						port_id = <4>;
-						phy_address = <3>;
-					};
-					port@4 {
-						port_id = <5>;
-						phy_address = <4>;
-					};
-				};
-			};
-		};
-		dp1 {
-			device_type = "network";
-			compatible = "qcom,nss-dp";
-			clocks = <&gcc GCC_SNOC_GMAC1_AXI_CLK>;
-			clock-names = "nss-snoc-gmac-axi-clk";
-			qcom,id = <2>;
-			reg = <0x39D00000 0x10000>;
-			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
-			qcom,mactype = <2>;
-			local-mac-address = [000000000000];
-			phy-mode = "sgmii";
-		};
-
-		dp2 {
-			device_type = "network";
-			compatible = "qcom,nss-dp";
-			clocks = <&gcc GCC_SNOC_GMAC0_AXI_CLK>;
-			clock-names = "nss-snoc-gmac-axi-clk";
-			qcom,id = <1>;
-			reg = <0x39C00000 0x10000>;
-			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
-			qcom,mactype = <2>;
-			qcom,link-poll = <1>;
-			qcom,phy-mdio-addr = <7>;
-			mdio-bus = <&mdio0>;
-			local-mac-address = [000000000000];
-			phy-mode = "sgmii";
-		};
-
-		qcom,test@0 {
-			status = "ok";
-		};
-
-/*
-		lpass: lpass@0xA000000{
-			status = "disabled";
-		};
-
-		pcm: pcm@0xA3C0000{
-			pinctrl-0 = <&audio_pins>;
-			pinctrl-names = "default";
-			status = "disabled";
-		};
-
-		pcm_lb: pcm_lb@0 {
-			status = "disabled";
-		};
-*/
-	};
-
-	thermal-zones {
-		status = "ok";
-	};
-};
-
-&tlmm {
-	pinctrl-0 = <&blsp0_uart_pins>; //<&blsp0_uart_pins &phy_led_pins>;
-	pinctrl-names = "default";
-
-	blsp0_uart_pins: blsp0_uart_pins {
-		blsp0_uart_rx_tx {
-			pins = "gpio20", "gpio21";
-			function = "blsp0_uart0";
-			bias-disable;
-		};
-	};
-/*
-	blsp1_uart_pins: blsp1_uart_pins {
-		blsp1_uart_rx_tx {
-			pins = "gpio23", "gpio25", "gpio24", "gpio26";
-			function = "blsp1_uart2";
-			bias-disable;
-		};
-	};
-*/
-	blsp0_spi_pins: blsp0_spi_pins {
-		mux {
-			pins = "gpio10", "gpio11", "gpio12", "gpio13";
-			function = "blsp0_spi";
-			drive-strength = <2>;
-			bias-disable;
-		};
-	};
-
-	qspi_nand_pins: qspi_nand_pins {
-		qspi_clock {
-			pins = "gpio9";
-			function = "qspi_clk";
-			drive-strength = <8>;
-			bias-disable;
-		};
-
-		qspi_cs {
-			pins = "gpio8";
-			function = "qspi_cs";
-			drive-strength = <8>;
-			bias-disable;
-		};
-
-		qspi_data {
-			pins = "gpio4", "gpio5", "gpio6", "gpio7";
-			function = "qspi_data";
-			drive-strength = <8>;
-			bias-disable;
-		};
-	};
-
-	mdio1_pins: mdio_pinmux {
-		mux_0 {
-			pins = "gpio36";
-			function = "mdc";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
-
-		mux_1 {
-			pins = "gpio37";
-			function = "mdio";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
-	};
-/*
-	phy_led_pins: phy_led_pins {
-		gephy_led_pin {
-			pins = "gpio46";
-			function = "led0";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-	};
-*/
-	i2c_pins: i2c_pins {
-		i2c_scl {
-			pins = "gpio25";
-			function = "blsp2_i2c1";
-			drive-strength = <8>;
-			bias-disable;
-		};
-
-		i2c_sda {
-			pins = "gpio26";
-			function = "blsp2_i2c1";
-			drive-strength = <8>;
-			bias-disable;
-		};
-	};
-
-	button_pins: button_pins {
-		reset_button {
-			pins = "gpio28";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
-	};
-/*
-	audio_pins: audio_pinmux {
-		mux_1 {
-			pins = "gpio24";
-			function = "audio_rxbclk";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-
-		mux_2 {
-			pins = "gpio25";
-			function = "audio_rxfsync";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-
-		mux_3 {
-			pins = "gpio26";
-			function = "audio_rxd";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-
-		mux_4 {
-			pins = "gpio27";
-			function = "audio_txmclk";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-
-		mux_5 {
-			pins = "gpio28";
-			function = "audio_txbclk";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-
-		mux_6 {
-			pins = "gpio29";
-			function = "audio_txfsync";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-
-		mux_7 {
-			pins = "gpio30";
-			function = "audio_txd";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-	};
-*/
-	poe_pins: poe_pinmux {
-		/*
-			LAN port PoE output enable
-			H --> enable; L --> disable (Default setting to H)
-		*/
-		mux_0 { /* PoE_OUT_EN */
-			pins = "gpio24";
-			function = "gpio";
-			drive-strength = <2>;
-			bias-pull-up;
-			output-high;
-		};
-
-		mux_1 { /* PSE_INT_N */
-			pins = "gpio27";
-			function = "gpio";
-			bias-pull-up;
-			input;
-		};
-	};
-
-	leds_pins: leds_pinmux {
-		sys_green {
-			pins = "gpio1";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-disable;
-		};
-		sys_blue {
-			pins = "gpio30";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
-		sys_red {
-			pins = "gpio46";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-disable;
-		};
-	};
-};
-
-&soc {
-	gpio_keys {
-		compatible = "gpio-keys";
-		pinctrl-0 = <&button_pins>;
-		pinctrl-names = "default";
-
-		button@1 {
-			label = "reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&tlmm 28 GPIO_ACTIVE_LOW>;
-			linux,input-type = <1>;
-			debounce-interval = <60>;
-		};
-	};
-
-	gpio_leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&leds_pins>;
-		pinctrl-names = "default";
-
-		led@1 {
-			label = "sys:green";
-			gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>;  /* GPIO_1/ATST_QP0 */
-			default-state="off";
-		};
-		led@30 {
-			label = "sys:blue";
-			gpios = <&tlmm 30 GPIO_ACTIVE_HIGH>;  /* GPIO_30 */
-			default-state="on";
-		};
-		led@46 {
-			label = "sys:red";
-			gpios = <&tlmm 46 GPIO_ACTIVE_HIGH>;  /* GPIO_46 */
-			default-state="off";
-		};
-	};
-};
-
-&q6v5_wcss {
-	compatible = "qcom,ipq5018-q6-mpd";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	ranges;
-	firmware = "IPQ5018/q6_fw.mdt";
-	reg = <0x0cd00000 0x4040>,
-		<0x1938000 0x8>,
-		<0x193d204 0x4>;
-	reg-names = "qdsp6",
-			"tcsr-msip",
-			"tcsr-q6";
-	resets = <&gcc GCC_WCSSAON_RESET>,
-			<&gcc GCC_WCSS_Q6_BCR>;
-
-	reset-names = "wcss_aon_reset",
-			"wcss_q6_reset";
-
-	clocks = <&gcc GCC_Q6_AXIS_CLK>,
-		<&gcc GCC_WCSS_ECAHB_CLK>,
-		<&gcc GCC_Q6_AXIM_CLK>,
-		<&gcc GCC_Q6_AXIM2_CLK>,
-		<&gcc GCC_Q6_AHB_CLK>,
-		<&gcc GCC_Q6_AHB_S_CLK>,
-		<&gcc GCC_WCSS_AXI_S_CLK>;
-	clock-names = "gcc_q6_axis_clk",
-		"gcc_wcss_ecahb_clk",
-		"gcc_q6_axim_clk",
-		"gcc_q6_axim2_clk",
-		"gcc_q6_ahb_clk",
-		"gcc_q6_ahb_s_clk",
-		"gcc_wcss_axi_s_clk";
-
-	#ifdef __IPQ_MEM_PROFILE_256_MB__
-		memory-region = <&q6_mem_regions>, <&q6_etr_region>;
-	#else
-		memory-region = <&q6_mem_regions>, <&q6_etr_region>,
-				<&q6_caldb_region>;
-	#endif
-
-	qcom,rproc = <&q6v5_wcss>;
-	qcom,bootargs_smem = <507>;
-	boot-args = <0x1 0x4 0x3 0x0F 0x0 0x0>,
-			<0x2 0x4 0x2 0x12 0x0 0x0>;
-	status = "ok";
-	q6_wcss_pd1: remoteproc_pd1@4ab000 {
-		compatible = "qcom,ipq5018-wcss-ahb-mpd";
-		reg = <0x4ab000 0x20>;
-		reg-names = "rmb";
-		firmware = "IPQ5018/q6_fw.mdt";
-		m3_firmware = "IPQ5018/m3_fw.mdt";
-		interrupts-extended = <&wcss_smp2p_in 8 0>,
-					<&wcss_smp2p_in 9 0>,
-					<&wcss_smp2p_in 12 0>,
-					<&wcss_smp2p_in 11 0>;
-		interrupt-names = "fatal",
-					"ready",
-					"spawn-ack",
-					"stop-ack";
-
-		resets = <&gcc GCC_WCSSAON_RESET>,
-				<&gcc GCC_WCSS_BCR>,
-				<&gcc GCC_CE_BCR>;
-		reset-names = "wcss_aon_reset",
-				"wcss_reset",
-				"ce_reset";
-
-		clocks = <&gcc GCC_WCSS_AHB_S_CLK>,
-				<&gcc GCC_WCSS_ACMT_CLK>,
-				<&gcc GCC_WCSS_AXI_M_CLK>;
-		clock-names = "gcc_wcss_ahb_s_clk",
-					"gcc_wcss_acmt_clk",
-					"gcc_wcss_axi_m_clk";
-
-		qcom,halt-regs = <&tcsr_q6_block 0xa000 0xd000 0x0>;
-
-		qcom,smem-states = <&wcss_smp2p_out 8>,
-					<&wcss_smp2p_out 9>,
-					<&wcss_smp2p_out 10>;
-		qcom,smem-state-names = "shutdown",
-					"stop",
-					"spawn";
-	#ifdef __IPQ_MEM_PROFILE_256_MB__
-		memory-region = <&q6_ipq5018_data>, <&m3_dump>,
-				<&q6_etr_region>;
-	#else
-		memory-region = <&q6_ipq5018_data>, <&m3_dump>,
-				<&q6_etr_region>, <&q6_caldb_region>;
-	#endif
-
-	};
-
-	q6_wcss_pd2: remoteproc_pd2 {
-		compatible = "qcom,ipq5018-wcss-pcie-mpd";
-		firmware = "IPQ5018/q6_fw.mdt";
-		m3_firmware = "qcn6122/m3_fw.mdt";
-		interrupts-extended = <&wcss_smp2p_in 16 0>,
-					<&wcss_smp2p_in 17 0>,
-					<&wcss_smp2p_in 20 0>,
-					<&wcss_smp2p_in 19 0>;
-		interrupt-names = "fatal",
-					"ready",
-					"spawn-ack",
-					"stop-ack";
-
-		qcom,smem-states = <&wcss_smp2p_out 16>,
-					<&wcss_smp2p_out 17>,
-					<&wcss_smp2p_out 18>;
-		qcom,smem-state-names = "shutdown",
-					"stop",
-					"spawn";
-	#ifdef __IPQ_MEM_PROFILE_256_MB__
-		memory-region = <&q6_qcn6122_data1>, <&m3_dump_qcn6122_1>,
-				<&q6_qcn6122_etr_1>;
-	#else
-		memory-region = <&q6_qcn6122_data1>, <&m3_dump_qcn6122_1>,
-				<&q6_qcn6122_etr_1>, <&q6_qcn6122_caldb_1>;
-	#endif
-
-	};
-
-	q6_wcss_pd3: remoteproc_pd3 {
-		compatible = "qcom,ipq5018-wcss-pcie-mpd";
-		firmware = "IPQ5018/q6_fw.mdt";
-		interrupts-extended = <&wcss_smp2p_in 24 0>,
-					<&wcss_smp2p_in 25 0>,
-					<&wcss_smp2p_in 28 0>,
-					<&wcss_smp2p_in 27 0>;
-		interrupt-names = "fatal",
-					"ready",
-					"spawn-ack",
-					"stop-ack";
-
-		qcom,smem-states = <&wcss_smp2p_out 24>,
-					<&wcss_smp2p_out 25>,
-					<&wcss_smp2p_out 26>;
-		qcom,smem-state-names = "shutdown",
-					"stop",
-					"spawn";
-	#ifdef	__IPQ_MEM_PROFILE_256_MB__
-		memory-region = <&q6_qcn6122_data2>, <&m3_dump_qcn6122_2>,
-				<&q6_qcn6122_etr_2>;
-	#else
-		memory-region = <&q6_qcn6122_data2>, <&m3_dump_qcn6122_2>,
-				<&q6_qcn6122_etr_2>, <&q6_qcn6122_caldb_2>;
-	#endif
-	};
-};
-
-&i2c_0 {
-	pinctrl-0 = <&i2c_pins>;
-	pinctrl-names = "default";
-	status = "ok";
-};
-
-&wifi0 {
-	/* IPQ5018 */
-	qcom,multipd_arch;
-	qcom,rproc = <&q6_wcss_pd1>;
-	qcom,userpd-subsys-name = "q6v5_wcss_userpd1";
-#ifdef __IPQ_MEM_PROFILE_256_MB__
-	qcom,tgt-mem-mode = <2>;
-#else
-	qcom,tgt-mem-mode = <1>;
-#endif
-	qcom,board_id = <0x24>;
-#ifdef __CNSS2__
-	qcom,bdf-addr = <0x4C400000 0x4C400000 0x4C400000 0x0 0x0 0x0>;
-	qcom,caldb-addr = <0x4D300000 0x4D300000 0 0 0 0>;
-	qcom,caldb-size = <0x200000>;
-	mem-region = <&q6_ipq5018_data>;
-#else
-	memory-region = <&q6_ipq5018_data>;
-#endif
-	status = "ok";
-};
-
-&wifi1 {
-	/* QCN6122 5G */
-	qcom,multipd_arch;
-	qcom,userpd-subsys-name = "q6v5_wcss_userpd3";
-	qcom,rproc = <&q6_wcss_pd3>;
-#ifdef __IPQ_MEM_PROFILE_256_MB__
-	qcom,tgt-mem-mode = <2>;
-#else
-	qcom,tgt-mem-mode = <1>;
-#endif
-	qcom,board_id = <0x60>;
-#ifdef __CNSS2__
-	qcom,bdf-addr = <0x4E900000 0x4E900000 0x4E200000 0x0 0x0>;
-	qcom,caldb-addr = <0x4F800000 0x4F800000 0 0 0>;
-	qcom,caldb-size = <0x500000>;
-	mem-region = <&q6_qcn6122_data2>;
-#else
-	memory-region = <&q6_qcn6122_data2>;
-#endif
-	status = "ok";
-};
-
-&wifi2 {
-	/* QCN6122 6G */
-	qcom,multipd_arch;
-	qcom,userpd-subsys-name = "q6v5_wcss_userpd3";
-#ifdef __IPQ_MEM_PROFILE_256_MB__
-	qcom,tgt-mem-mode = <2>;
-#else
-	qcom,tgt-mem-mode = <1>;
-#endif
-	qcom,board_id = <0xb0>;
-	qcom,bdf-addr = <0x4ED00000 0x4ED00000 0x4E400000 0x0 0x0>;
-#ifdef __CNSS2__
-	qcom,caldb-addr = <0x4FF00000 0x4FF00000 0 0 0>;
-#else
-	qcom,caldb-addr = <0x4FF00000>;
-	m3-dump-addr = <0x4FD00000>;
-#endif
-	qcom,caldb-size = <0x500000>;
-	status = "disabled";
-};
-
-&usb3 {
-       status = "ok";
-       device-power-gpio = <&tlmm 24 1>;
-};
-
-&dwc_0 {
-       /delete-property/ #phy-cells;
-       /delete-property/ phys;
-       /delete-property/ phy-names;
-};
-
-&hs_m31phy_0 {
-       status = "ok";
-};
-
-&eud {
-	status = "ok";
-};
-
-&pcie_x1 {
-	perst-gpio = <&tlmm 18 GPIO_ACTIVE_LOW>;
-};
-
-&pcie_x2 {
-	perst-gpio = <&tlmm 15 GPIO_ACTIVE_LOW>;
-};
-
-&pcie_x1_rp {
-	status = "disabled";
-
-	mhi_0: qcom,mhi@0 {
-		reg = <0 0 0 0 0 >;
-	};
-};
-
-&pcie_x2_rp {
-	status = "disabled";
-
-	mhi_1: qcom,mhi@1 {
-		reg = <0 0 0 0 0 >;
-
-	};
-};

feeds/ipq807x_v5.4/ipq50xx/files/arch/arm64/boot/dts/qcom/qcom-ipq5018-udaya-a6-id2.dts

@@ -425,7 +425,7 @@
 			pinctrl-0 = <&button_pins>;
 			pinctrl-names = "default";
 
-			reset {
+			wps {
 				label = "reset";
 				linux,code = <KEY_RESTART>;
 				gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
@@ -550,7 +550,7 @@
 	};
 
 	button_pins: button_pins {
-		reset_button {
+		wps_button {
 			pins = "gpio38";
 			function = "gpio";
 			drive-strength = <8>;
@@ -625,9 +625,9 @@
 		pinctrl-0 = <&button_pins>;
 		pinctrl-names = "default";
 
-		reset {
-			label = "reset";
-			linux,code = <KEY_RESTART>;
+		button@1 {
+			label = "wps";
+			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
 			linux,input-type = <1>;
 			debounce-interval = <60>;

feeds/ipq807x_v5.4/ipq50xx/files/arch/arm64/boot/dts/qcom/qcom-ipq5018-wallys-dr5018.dts

@@ -1,915 +0,0 @@
-/dts-v1/;
-/* Copyright (c) 2018-2021, The Linux Foundation. All rights reserved.
- *
- * Copyright (c) 2021 Qualcomm Innovation Center, Inc. All rights reserved.
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- */
-
-#include "ipq5018.dtsi"
-#include <dt-bindings/input/input.h>
-
-/ {
-	#address-cells = <0x2>;
-	#size-cells = <0x2>;
-	model = "Wallys DR5018";
-	compatible = "wallys,dr5018", "qcom,ipq5018-mp03.5", "qcom,ipq5018";
-	interrupt-parent = <&intc>;
-
-	aliases {
-		sdhc1 = &sdhc_1; /* SDC1 eMMC slot */
-		serial0 = &blsp1_uart1;
-		serial1 = &blsp1_uart2;
-		ethernet0 = "/soc/dp1";
-		ethernet1 = "/soc/dp2";
-
-		led-boot = &led_power;
-		led-failsafe = &led_power;
-		led-running = &led_power;
-		led-upgrade = &led_power;
-	};
-
-	chosen {
-		bootargs = "console=ttyMSM0,115200,n8 rw init=/init";
-		bootargs-append = " swiotlb=1 coherent_pool=2M";
-		stdout-path = "serial0";
-	};
-
-	reserved-memory {
-	#ifdef __IPQ_MEM_PROFILE_256_MB__
-	/*		   256 MB Profile
-	 * +==========+==============+=========================+
-	 * |	  |	      |			 |
-	 * |  Region  | Start Offset |	  Size	   |
-	 * |	  |	      |			 |
-	 * +----------+--------------+-------------------------+
-	 * |    NSS   |  0x40000000  |	   8MB	   |
-	 * +----------+--------------+-------------------------+
-	 * |   Linux  |  0x40800000  | Depends on total memory |
-	 * +----------+--------------+-------------------------+
-	 * |   uboot  |  0x4A600000  |	   4MB	   |
-	 * +----------+--------------+-------------------------+
-	 * |    SBL   |  0x4AA00000  |	   1MB	   |
-	 * +----------+--------------+-------------------------+
-	 * |   smem   |  0x4AB00000  |	   1MB	   |
-	 * +----------+--------------+-------------------------+
-	 * |    TZ    |  0x4AC00000  |	   4MB	   |
-	 * +----------+--------------+-------------------------+
-	 * |    Q6    |	      |			 |
-	 * |   code/  |  0x4B000000  |	  20MB	   |
-	 * |   data   |	      |			 |
-	 * +----------+--------------+-------------------------+
-	 * |  IPQ5018 |	      |			 |
-	 * |   data   |  0x4C400000  |	  13MB	   |
-	 * +----------+--------------+-------------------------+
-	 * |  IPQ5018 |	      |			 |
-	 * |  M3 Dump |  0x4D100000  |	   1MB	   |
-	 * +----------+--------------+-------------------------+
-	 * |  IPQ5018 |	      |			 |
-	 * |   QDSS   |  0x4D200000  |	   1MB	   |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_1|	      |			 |
-	 * |   data   |  0x4D300000  |	  13MB	   |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_1|	      |			 |
-	 * |  M3 Dump |  0x4E000000  |	   1MB	   |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_1|	      |			 |
-	 * |   QDSS   |  0x4E100000  |	   1MB	   |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_2|	      |			 |
-	 * |   data   |  0x4E200000  |	  13MB	   |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_2|	      |			 |
-	 * |  M3 Dump |  0x4EF00000  |	   1MB	   |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_2|	      |			 |
-	 * |   QDSS   |  0x4F000000  |	   1MB	   |
-	 * +----------+--------------+-------------------------+
-	 * |						   |
-	 * |	    Rest of the memory for Linux	   |
-	 * |						   |
-	 * +===================================================+
-	 */
-		q6_mem_regions: q6_mem_regions@4B000000 {
-			no-map;
-			reg = <0x0 0x4B000000 0x0 0x4100000>;
-		};
-
-		q6_code_data: q6_code_data@4B000000 {
-			no-map;
-			reg = <0x0 0x4B000000 0x0 0x1400000>;
-		};
-
-		q6_ipq5018_data: q6_ipq5018_data@4C400000 {
-			no-map;
-			reg = <0x0 0x4C400000 0x0 0xD00000>;
-		};
-
-		m3_dump: m3_dump@4D100000 {
-			no-map;
-			reg = <0x0 0x4D100000 0x0 0x100000>;
-		};
-
-		q6_etr_region: q6_etr_dump@4D200000 {
-			no-map;
-			reg = <0x0 0x4D200000 0x0 0x100000>;
-		};
-
-		q6_qcn6122_data1: q6_qcn6122_data1@4D300000 {
-			no-map;
-			reg = <0x0 0x4D300000 0x0 0xD00000>;
-		};
-
-		m3_dump_qcn6122_1: m3_dump_qcn6122_1@4E000000 {
-			no-map;
-			reg = <0x0 0x4E000000 0x0 0x100000>;
-		};
-
-		q6_qcn6122_etr_1: q6_qcn6122_etr_1@4E100000 {
-			no-map;
-			reg = <0x0 0x4E100000 0x0 0x100000>;
-		};
-
-		q6_qcn6122_data2: q6_qcn6122_data2@4E200000 {
-			no-map;
-			reg = <0x0 0x4E200000 0x0 0xD00000>;
-		};
-
-		m3_dump_qcn6122_2: m3_dump_qcn6122_2@4EF00000 {
-			no-map;
-			reg = <0x0 0x4EF00000 0x0 0x100000>;
-		};
-
-		q6_qcn6122_etr_2: q6_qcn6122_etr_2@4F000000 {
-			no-map;
-			reg = <0x0 0x4F000000 0x0 0x100000>;
-		};
-	#else
-	/*		 512MB/1GB Profiles
-	 * +==========+==============+=========================+
-	 * |	  |	      |			 |
-	 * |  Region  | Start Offset |	  Size	   |
-	 * |	  |	      |			 |
-	 * +----------+--------------+-------------------------+
-	 * |    NSS   |  0x40000000  |	  16MB	   |
-	 * +----------+--------------+-------------------------+
-	 * |   Linux  |  0x41000000  | Depends on total memory |
-	 * +----------+--------------+-------------------------+
-	 * |   uboot  |  0x4A600000  |	   4MB	   |
-	 * +----------+--------------+-------------------------+
-	 * |    SBL   |  0x4AA00000  |	   1MB	   |
-	 * +----------+--------------+-------------------------+
-	 * |   smem   |  0x4AB00000  |	   1MB	   |
-	 * +----------+--------------+-------------------------+
-	 * |    TZ    |  0x4AC00000  |	   4MB	   |
-	 * +----------+--------------+-------------------------+
-	 * |    Q6    |	      |			 |
-	 * |   code/  |  0x4B000000  |	  20MB	   |
-	 * |   data   |	      |			 |
-	 * +----------+--------------+-------------------------+
-	 * |  IPQ5018 |	      |			 |
-	 * |   data   |  0x4C400000  |	  13MB	   |
-	 * +----------+--------------+-------------------------+
-	 * |  IPQ5018 |	      |			 |
-	 * |  M3 Dump |  0x4D100000  |	   1MB	   |
-	 * +----------+--------------+-------------------------+
-	 * |  IPQ5018 |	      |			 |
-	 * |   QDSS   |  0x4D200000  |	   1MB	   |
-	 * +----------+--------------+-------------------------+
-	 * |  IPQ5018 |	      |			 |
-	 * |  Caldb   |  0x4D300000  |	   2MB	   |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_1|	      |			 |
-	 * |   data   |  0x4D500000  |	  13MB	   |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_1|	      |			 |
-	 * |  M3 Dump |  0x4E200000  |	   1MB	   |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_1|	      |			 |
-	 * |   QDSS   |  0x4E300000  |	   1MB	   |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_1|	      |			 |
-	 * |  Caldb   |  0x4E400000  |	   5MB	   |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_2|	      |			 |
-	 * |   data   |  0x4E900000  |	  13MB	   |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_2|	      |			 |
-	 * |  M3 Dump |  0x4F600000  |	   1MB	   |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_2|	      |			 |
-	 * |   QDSS   |  0x4F700000  |	   1MB	   |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_2|	      |			 |
-	 * |  Caldb   |  0x4F800000  |	   5MB	   |
-	 * +----------+--------------+-------------------------+
-	 * |						   |
-	 * |	    Rest of the memory for Linux	   |
-	 * |						   |
-	 * +===================================================+
-	 */
-		q6_mem_regions: q6_mem_regions@4B000000 {
-			no-map;
-			reg = <0x0 0x4B000000 0x0 0x4D00000>;
-		};
-
-		q6_code_data: q6_code_data@4B000000 {
-			no-map;
-			reg = <0x0 0x4B000000 0x0 01400000>;
-		};
-
-		q6_ipq5018_data: q6_ipq5018_data@4C400000 {
-			no-map;
-			reg = <0x0 0x4C400000 0x0 0xD00000>;
-		};
-
-		m3_dump: m3_dump@4D100000 {
-			no-map;
-			reg = <0x0 0x4D100000 0x0 0x100000>;
-		};
-
-		q6_etr_region: q6_etr_dump@4D200000 {
-			no-map;
-			reg = <0x0 0x4D200000 0x0 0x100000>;
-		};
-
-		q6_caldb_region: q6_caldb_region@4D300000 {
-			no-map;
-			reg = <0x0 0x4D300000 0x0 0x200000>;
-		};
-
-		q6_qcn6122_data1: q6_qcn6122_data1@4D500000 {
-			no-map;
-			reg = <0x0 0x4D500000 0x0 0xD00000>;
-		};
-
-		m3_dump_qcn6122_1: m3_dump_qcn6122_1@4E200000 {
-			no-map;
-			reg = <0x0 0x4E200000 0x0 0x100000>;
-		};
-
-		q6_qcn6122_etr_1: q6_qcn6122_etr_1@4E300000 {
-			no-map;
-			reg = <0x0 0x4E300000 0x0 0x100000>;
-		};
-
-		q6_qcn6122_caldb_1: q6_qcn6122_caldb_1@4E400000 {
-			no-map;
-			reg = <0x0 0x4E400000 0x0 0x500000>;
-		};
-
-		q6_qcn6122_data2: q6_qcn6122_data2@4E900000 {
-			no-map;
-			reg = <0x0 0x4E900000 0x0 0xD00000>;
-		};
-
-		m3_dump_qcn6122_2: m3_dump_qcn6122_2@4F600000 {
-			no-map;
-			reg = <0x0 0x4F600000 0x0 0x100000>;
-		};
-
-		q6_qcn6122_etr_2: q6_qcn6122_etr_2@4F700000 {
-			no-map;
-			reg = <0x0 0x4F700000 0x0 0x100000>;
-		};
-
-		q6_qcn6122_caldb_2: q6_qcn6122_caldb_2@4F800000 {
-			no-map;
-			reg = <0x0 0x4F800000 0x0 0x500000>;
-		};
-
-	#endif
-	};
-
-	soc {
-		serial@78af000 {
-			status = "ok";
-		};
-
-		blsp1_uart2: serial@78b0000 {
-			pinctrl-0 = <&blsp1_uart_pins>;
-			pinctrl-names = "default";
-			status = "ok";
-		};
-
-		qpic_bam: dma@7984000{
-			status = "ok";
-		};
-
-		nand: qpic-nand@79b0000 {
-			pinctrl-0 = <&qspi_nand_pins>;
-			pinctrl-names = "default";
-			status = "ok";
-		};
-
-		spi_0: spi@78b5000 { /* BLSP1 QUP0 */
-			pinctrl-0 = <&blsp0_spi_pins>;
-			pinctrl-names = "default";
-			cs-select = <0>;
-			status = "ok";
-
-			m25p80@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0>;
-				compatible = "n25q128a11";
-				linux,modalias = "m25p80", "n25q128a11";
-				spi-max-frequency = <50000000>;
-				use-default-sizes;
-			};
-		};
-
-		mdio0: mdio@88000 {
-			status = "ok";
-
-			ethernet-phy@0 {
-				reg = <7>;
-			};
-		};
-
-		mdio1: mdio@90000 {
-			status = "ok";
-			pinctrl-0 = <&mdio1_pins>;
-			pinctrl-names = "default";
-			phy-reset-gpio = <&tlmm 39 0>;
-			ethernet-phy@0 {
-				reg = <0>;
-			};
-
-			ethernet-phy@1 {
-				reg = <1>;
-			};
-
-			ethernet-phy@2 {
-				reg = <2>;
-			};
-
-			ethernet-phy@3 {
-				reg = <3>;
-			};
-		};
-
-		ess-instance {
-			num_devices = <0x2>;
-			ess-switch@0x39c00000 {
-				compatible = "qcom,ess-switch-ipq50xx";
-				device_id = <0>;
-				switch_mac_mode = <0xf>; /* mac mode for uniphy instance*/
-				cmnblk_clk = "internal_96MHz"; /* cmnblk clk*/
-				qcom,port_phyinfo {
-					port@0 {
-						port_id = <1>;
-						phy_address = <7>;
-					};
-					port@1 {
-						port_id = <2>;
-						forced-speed = <1000>;
-						forced-duplex = <1>;
-					};
-				};
-				led_source@0 {
-					source = <0>;
-					mode = "normal";
-					speed = "all";
-					blink_en = "enable";
-					active = "high";
-				};
-			};
-			ess-switch1@1 {
-				compatible = "qcom,ess-switch-qca83xx";
-				device_id = <1>;
-				switch_access_mode = "mdio";
-				mdio-bus = <&mdio1>;
-				reset_gpio = <&tlmm 0x27 0>;
-				switch_cpu_bmp = <0x40>;  /* cpu port bitmap */
-				switch_lan_bmp = <0x1e>; /* lan port bitmap */
-				switch_wan_bmp = <0x0>;  /* wan port bitmap */
-				qca,ar8327-initvals = <
-						0x00004 0x7600000   /* PAD0_MODE */
-						0x00008 0x1000000   /* PAD5_MODE */
-						0x0000c 0x80	/* PAD6_MODE */
-						0x00010 0x2613a0    /* PORT6 FORCE MODE*/
-						0x000e4 0xaa545     /* MAC_POWER_SEL */
-						0x000e0 0xc74164de  /* SGMII_CTRL */
-						0x0007c 0x4e	/* PORT0_STATUS */
-						0x00094 0x4e	/* PORT6_STATUS */
-				>;
-				qcom,port_phyinfo {
-					port@0 {
-						port_id = <1>;
-						phy_address = <0>;
-					};
-					port@1 {
-						port_id = <2>;
-						phy_address = <1>;
-					};
-					port@2 {
-						port_id = <3>;
-						phy_address = <2>;
-					};
-					port@3 {
-						port_id = <4>;
-						phy_address = <3>;
-					};
-				};
-			};
-		};
-
-		dp1 {
-			device_type = "network";
-			compatible = "qcom,nss-dp";
-			clocks = <&gcc GCC_SNOC_GMAC0_AXI_CLK>;
-			clock-names = "nss-snoc-gmac-axi-clk";
-			qcom,id = <1>;
-			reg = <0x39C00000 0x10000>;
-			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
-			qcom,mactype = <2>;
-			qcom,link-poll = <1>;
-			qcom,phy-mdio-addr = <7>;
-			mdio-bus = <&mdio0>;
-			local-mac-address = [000000000000];
-			phy-mode = "sgmii";
-			qcom,rx-page-mode = <0>;
-		};
-
-		dp2 {
-			device_type = "network";
-			compatible = "qcom,nss-dp";
-			clocks = <&gcc GCC_SNOC_GMAC1_AXI_CLK>;
-			clock-names = "nss-snoc-gmac-axi-clk";
-			qcom,id = <2>;
-			reg = <0x39D00000 0x10000>;
-			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
-			qcom,mactype = <2>;
-			local-mac-address = [000000000000];
-			phy-mode = "sgmii";
-			qcom,rx-page-mode = <0>;
-		};
-
-		nss-macsec1 {
-			compatible = "qcom,nss-macsec";
-			phy_addr = <0x1c>;
-			mdiobus = <&mdio1>;
-		};
-	};
-
-	qcom,test@0 {
-		status = "ok";
-	};
-
-	thermal-zones {
-		status = "ok";
-	};
-};
-
-&tlmm {
-	pinctrl-0 = <&blsp0_uart_pins &mcu_pins>;
-	pinctrl-names = "default";
-
-	mcu_pins: mcu_pins {
-		mcu_rst {
-			pins = "gpio31";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-disable;
-			output-low;
-		};
-
-		mcu_sbl {
-			pins = "gpio35";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-disable;
-			output-low;
-		};
-	};
-
-	blsp0_uart_pins: uart_pins {
-		blsp0_uart_rx_tx {
-			pins = "gpio20", "gpio21";
-			function = "blsp0_uart0";
-			bias-disable;
-		};
-	};
-
-	blsp1_uart_pins: blsp1_uart_pins {
-		blsp1_uart_rx_tx {
-			pins = "gpio23", "gpio25", "gpio24", "gpio26";
-			function = "blsp1_uart2";
-			bias-disable;
-		};
-	};
-
-	blsp0_spi_pins: blsp0_spi_pins {
-		mux {
-			pins = "gpio10", "gpio11", "gpio12", "gpio13";
-			function = "blsp0_spi";
-			drive-strength = <2>;
-			bias-disable;
-		};
-	};
-
-	qspi_nand_pins: qspi_nand_pins {
-		qspi_clock {
-			pins = "gpio9";
-			function = "qspi_clk";
-			drive-strength = <8>;
-			bias-disable;
-		};
-
-		qspi_cs {
-			pins = "gpio8";
-			function = "qspi_cs";
-			drive-strength = <8>;
-			bias-disable;
-		};
-
-		qspi_data {
-			pins = "gpio4", "gpio5", "gpio6", "gpio7";
-			function = "qspi_data";
-			drive-strength = <8>;
-			bias-disable;
-		};
-	};
-
-	mdio1_pins: mdio_pinmux {
-		mux_0 {
-			pins = "gpio36";
-			function = "mdc";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
-
-		mux_1 {
-			pins = "gpio37";
-			function = "mdio";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
-	};
-
-	leds_pins: leds_pins {
-		led_power {
-			pins = "gpio30";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-		led_uplink {
-			pins = "gpio46";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-	};
-
-	i2c_pins: i2c_pins {
-		i2c_scl {
-			pins = "gpio33";
-			function = "blsp2_i2c0";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
-
-		i2c_sda {
-			pins = "gpio34";
-			function = "blsp2_i2c0";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
-	};
-
-	button_pins: button_pins {
-		wps_button {
-			pins = "gpio38";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
-	};
-};
-
-&soc {
-	gpio-export {
-		compatible = "gpio-export";
-		#size-cells = <0>;
-
-		mcu-bootloader {
-			gpio-export,name = "mcu-bootloader";
-			gpio-export,output = <0>;
-			gpios = <&tlmm 35 GPIO_ACTIVE_LOW>;
-		};
-
-		mcu-enable {
-			gpio-export,name = "mcu-enable";
-			gpio-export,output = <0>;
-			gpios = <&tlmm 31 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		pinctrl-0 = <&button_pins>;
-		pinctrl-names = "default";
-
-		wps {
-			label = "reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&tlmm 32 GPIO_ACTIVE_LOW>;
-			linux,input-type = <1>;
-			debounce-interval = <60>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&leds_pins>;
-		pinctrl-names = "default";
-
-		led_power: led@30 {
-			label = "green:power";
-			gpios = <&tlmm 30 GPIO_ACTIVE_HIGH>;
-			default-state = "on";
-		};
-		led@46 {
-			label = "green:uplink";
-			gpios = <&tlmm 46 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-	};
-};
-
-&q6v5_wcss {
-	compatible = "qcom,ipq5018-q6-mpd";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	ranges;
-	firmware = "IPQ5018/q6_fw.mdt";
-	reg = <0x0cd00000 0x4040>,
-		<0x1938000 0x8>,
-		<0x193d204 0x4>;
-	reg-names = "qdsp6",
-			"tcsr-msip",
-			"tcsr-q6";
-	resets = <&gcc GCC_WCSSAON_RESET>,
-			<&gcc GCC_WCSS_Q6_BCR>;
-
-	reset-names = "wcss_aon_reset",
-			"wcss_q6_reset";
-
-	clocks = <&gcc GCC_Q6_AXIS_CLK>,
-		<&gcc GCC_WCSS_ECAHB_CLK>,
-		<&gcc GCC_Q6_AXIM_CLK>,
-		<&gcc GCC_Q6_AXIM2_CLK>,
-		<&gcc GCC_Q6_AHB_CLK>,
-		<&gcc GCC_Q6_AHB_S_CLK>,
-		<&gcc GCC_WCSS_AXI_S_CLK>;
-	clock-names = "gcc_q6_axis_clk",
-		"gcc_wcss_ecahb_clk",
-		"gcc_q6_axim_clk",
-		"gcc_q6_axim2_clk",
-		"gcc_q6_ahb_clk",
-		"gcc_q6_ahb_s_clk",
-		"gcc_wcss_axi_s_clk";
-
-	#ifdef __IPQ_MEM_PROFILE_256_MB__
-		memory-region = <&q6_mem_regions>, <&q6_etr_region>;
-	#else
-		memory-region = <&q6_mem_regions>, <&q6_etr_region>,
-				<&q6_caldb_region>;
-	#endif
-
-	qcom,rproc = <&q6v5_wcss>;
-	qcom,bootargs_smem = <507>;
-	boot-args = <0x1 0x4 0x3 0x0F 0x0 0x0>,
-			<0x2 0x4 0x2 0x12 0x0 0x0>;
-	status = "ok";
-	q6_wcss_pd1: remoteproc_pd1@4ab000 {
-		compatible = "qcom,ipq5018-wcss-ahb-mpd";
-		reg = <0x4ab000 0x20>;
-		reg-names = "rmb";
-		firmware = "IPQ5018/q6_fw.mdt";
-		m3_firmware = "IPQ5018/m3_fw.mdt";
-		interrupts-extended = <&wcss_smp2p_in 8 0>,
-					<&wcss_smp2p_in 9 0>,
-					<&wcss_smp2p_in 12 0>,
-					<&wcss_smp2p_in 11 0>;
-		interrupt-names = "fatal",
-					"ready",
-					"spawn-ack",
-					"stop-ack";
-
-		resets = <&gcc GCC_WCSSAON_RESET>,
-				<&gcc GCC_WCSS_BCR>,
-				<&gcc GCC_CE_BCR>;
-		reset-names = "wcss_aon_reset",
-				"wcss_reset",
-				"ce_reset";
-
-		clocks = <&gcc GCC_WCSS_AHB_S_CLK>,
-				<&gcc GCC_WCSS_ACMT_CLK>,
-				<&gcc GCC_WCSS_AXI_M_CLK>;
-		clock-names = "gcc_wcss_ahb_s_clk",
-					"gcc_wcss_acmt_clk",
-					"gcc_wcss_axi_m_clk";
-
-		qcom,halt-regs = <&tcsr_q6_block 0xa000 0xd000 0x0>;
-
-		qcom,smem-states = <&wcss_smp2p_out 8>,
-					<&wcss_smp2p_out 9>,
-					<&wcss_smp2p_out 10>;
-		qcom,smem-state-names = "shutdown",
-					"stop",
-					"spawn";
-	#ifdef __IPQ_MEM_PROFILE_256_MB__
-		memory-region = <&q6_ipq5018_data>, <&m3_dump>,
-				<&q6_etr_region>;
-	#else
-		memory-region = <&q6_ipq5018_data>, <&m3_dump>,
-				<&q6_etr_region>, <&q6_caldb_region>;
-	#endif
-
-	};
-
-	q6_wcss_pd2: remoteproc_pd2 {
-		compatible = "qcom,ipq5018-wcss-pcie-mpd";
-		firmware = "IPQ5018/q6_fw.mdt";
-		m3_firmware = "qcn6122/m3_fw.mdt";
-		interrupts-extended = <&wcss_smp2p_in 16 0>,
-					<&wcss_smp2p_in 17 0>,
-					<&wcss_smp2p_in 20 0>,
-					<&wcss_smp2p_in 19 0>;
-		interrupt-names = "fatal",
-					"ready",
-					"spawn-ack",
-					"stop-ack";
-
-		qcom,smem-states = <&wcss_smp2p_out 16>,
-					<&wcss_smp2p_out 17>,
-					<&wcss_smp2p_out 18>;
-		qcom,smem-state-names = "shutdown",
-					"stop",
-					"spawn";
-	#ifdef __IPQ_MEM_PROFILE_256_MB__
-		memory-region = <&q6_qcn6122_data1>, <&m3_dump_qcn6122_1>,
-				<&q6_qcn6122_etr_1>;
-	#else
-		memory-region = <&q6_qcn6122_data1>, <&m3_dump_qcn6122_1>,
-				<&q6_qcn6122_etr_1>, <&q6_qcn6122_caldb_1>;
-	#endif
-
-	};
-
-	q6_wcss_pd3: remoteproc_pd3 {
-		compatible = "qcom,ipq5018-wcss-pcie-mpd";
-		firmware = "IPQ5018/q6_fw.mdt";
-		interrupts-extended = <&wcss_smp2p_in 24 0>,
-					<&wcss_smp2p_in 25 0>,
-					<&wcss_smp2p_in 28 0>,
-					<&wcss_smp2p_in 27 0>;
-		interrupt-names = "fatal",
-					"ready",
-					"spawn-ack",
-					"stop-ack";
-
-		qcom,smem-states = <&wcss_smp2p_out 24>,
-					<&wcss_smp2p_out 25>,
-					<&wcss_smp2p_out 26>;
-		qcom,smem-state-names = "shutdown",
-					"stop",
-					"spawn";
-	#ifdef	__IPQ_MEM_PROFILE_256_MB__
-		memory-region = <&q6_qcn6122_data2>, <&m3_dump_qcn6122_2>,
-				<&q6_qcn6122_etr_2>;
-	#else
-		memory-region = <&q6_qcn6122_data2>, <&m3_dump_qcn6122_2>,
-				<&q6_qcn6122_etr_2>, <&q6_qcn6122_caldb_2>;
-	#endif
-	};
-};
-
-&i2c_0 {
-	pinctrl-0 = <&i2c_pins>;
-	pinctrl-names = "default";
-};
-
-&wifi0 {
-	/* IPQ5018 */
-	qcom,multipd_arch;
-	qcom,rproc = <&q6_wcss_pd1>;
-	qcom,userpd-subsys-name = "q6v5_wcss_userpd1";
-#ifdef __IPQ_MEM_PROFILE_256_MB__
-	qcom,tgt-mem-mode = <2>;
-#else
-	qcom,tgt-mem-mode = <1>;
-#endif
-	qcom,board_id = <0x23>;
-#ifdef __CNSS2__
-	qcom,bdf-addr = <0x4C400000 0x4C400000 0x4C400000 0x0 0x0>;
-	qcom,caldb-addr = <0x4D300000 0x4D300000 0 0 0>;
-	qcom,caldb-size = <0x200000>;
-	mem-region = <&q6_ipq5018_data>;
-#else
-	memory-region = <&q6_ipq5018_data>;
-#endif
-	status = "ok";
-};
-
-&wifi1 {
-	/* QCN6122 5G */
-	qcom,multipd_arch;
-	qcom,userpd-subsys-name = "q6v5_wcss_userpd2";
-	qcom,rproc = <&q6_wcss_pd2>;
-#ifdef __IPQ_MEM_PROFILE_256_MB__
-	qcom,tgt-mem-mode = <2>;
-#else
-	qcom,tgt-mem-mode = <1>;
-#endif
-	qcom,board_id = <0x60>;
-#ifdef __CNSS2__
-	qcom,bdf-addr = <0x4D500000 0x4D500000 0x4D300000 0x0 0x0>;
-	qcom,caldb-addr = <0x4E400000 0x4E400000 0 0 0>;
-	qcom,caldb-size = <0x500000>;
-	mem-region = <&q6_qcn6122_data1>;
-#else
-	memory-region = <&q6_qcn6122_data1>;
-#endif
-	status = "disabled";
-};
-
-&wifi2 {
-	/* QCN6122 6G */
-	qcom,multipd_arch;
-	qcom,userpd-subsys-name = "q6v5_wcss_userpd3";
-	qcom,rproc = <&q6_wcss_pd3>;
-#ifdef __IPQ_MEM_PROFILE_256_MB__
-	qcom,tgt-mem-mode = <2>;
-#else
-	qcom,tgt-mem-mode = <1>;
-#endif
-	qcom,board_id = <0xb0>;
-#ifdef __CNSS2__
-	qcom,bdf-addr = <0x4E900000 0x4E900000 0x4E200000 0x0 0x0>;
-	qcom,caldb-addr = <0x4F800000 0x4F800000 0 0 0>;
-	qcom,caldb-size = <0x500000>;
-	mem-region = <&q6_qcn6122_data2>;
-#else
-	memory-region = <&q6_qcn6122_data2>;
-#endif
-	status = "ok";
-};
-
-&usb3 {
-       status = "ok";
-       device-power-gpio = <&tlmm 24 1>;
-};
-
-&dwc_0 {
-       /delete-property/ #phy-cells;
-       /delete-property/ phys;
-       /delete-property/ phy-names;
-};
-
-&hs_m31phy_0 {
-       status = "ok";
-};
-
-&eud {
-	status = "ok";
-};
-
-&pcie_x1 {
-	perst-gpio = <&tlmm 18 GPIO_ACTIVE_LOW>;
-};
-
-&pcie_x2 {
-	perst-gpio = <&tlmm 15 GPIO_ACTIVE_LOW>;
-};
-
-&pcie_x1_rp {
-	status = "disabled";
-
-	mhi_0: qcom,mhi@0 {
-		reg = <0 0 0 0 0 >;
-	};
-};
-
-&pcie_x2_rp {
-	status = "disabled";
-
-	mhi_1: qcom,mhi@1 {
-		reg = <0 0 0 0 0 >;
-
-	};
-};

feeds/ipq807x_v5.4/ipq50xx/image/ipq50xx.mk

@@ -40,28 +40,6 @@ define Device/cybertan_eww631_b1
 endef
 TARGET_DEVICES += cybertan_eww631_b1
 
-define Device/sonicfi_rap630c_311g
-  DEVICE_TITLE := Sonicfi RAP630C-311G
-  DEVICE_DTS := qcom-ipq5018-rap630c-311g
-  SUPPORTED_DEVICES := sonicfi,rap630c-311g
-  DEVICE_PACKAGES := ath11k-wifi-sonicfi-rap630c-311g ath11k-firmware-ipq50xx-spruce ath11k-firmware-qcn6122
-  DEVICE_DTS_CONFIG := config@mp03.5-c1
-  IMAGES := sysupgrade.tar nand-factory.bin nand-factory.ubi
-  IMAGE/nand-factory.ubi := append-ubi
-endef
-TARGET_DEVICES += sonicfi_rap630c_311g
-
-define Device/sonicfi_rap630w_311g
-  DEVICE_TITLE := Sonicfi RAP630W-311G
-  DEVICE_DTS := qcom-ipq5018-rap630w-311g
-  SUPPORTED_DEVICES := sonicfi,rap630w-311g
-  DEVICE_PACKAGES := ath11k-wifi-sonicfi-rap630w-311g ath11k-firmware-ipq50xx-spruce ath11k-firmware-qcn6122
-  DEVICE_DTS_CONFIG := config@mp03.5-c1
-  IMAGES := sysupgrade.tar nand-factory.bin nand-factory.ubi
-  IMAGE/nand-factory.ubi := append-ubi
-endef
-TARGET_DEVICES += sonicfi_rap630w_311g
-
 define Device/edgecore_eap104
   DEVICE_TITLE := EdgeCore EAP104
   DEVICE_DTS := qcom-ipq5018-eap104
@@ -80,15 +58,6 @@ define Device/udaya_a6_id2
 endef
 TARGET_DEVICES += udaya_a6_id2
 
-define Device/wallys_dr5018
-  DEVICE_TITLE := Wallys DR5018
-  DEVICE_DTS := qcom-ipq5018-wallys-dr5018
-  SUPPORTED_DEVICES := wallys,dr5018
-  DEVICE_PACKAGES := ath11k-wifi-wallys-dr5018 uboot-envtools ath11k-firmware-ipq50xx-spruce ath11k-firmware-qcn6122
-  DEVICE_DTS_CONFIG := config@mp03.5-c1
-endef
-TARGET_DEVICES += wallys_dr5018
-
 define Device/yuncore_fap655
   DEVICE_TITLE := Yuncore FAP650
   DEVICE_DTS := qcom-ipq5018-yuncore-fap655
@@ -187,15 +156,3 @@ define Device/optimcloud_d60
   DEVICE_DTS_CONFIG := config@mp03.1
 endef
 TARGET_DEVICES += optimcloud_d60
-
-define Device/glinet_b3000
-  DEVICE_TITLE := GL.iNet B3000
-  DEVICE_DTS := qcom-ipq5018-gl-b3000
-  SUPPORTED_DEVICES := glinet,b3000
-  DEVICE_PACKAGES := ath11k-wifi-gl-b3000 ath11k-firmware-ipq50xx-spruce ath11k-firmware-qcn6122
-  DEVICE_DTS_CONFIG := config@mp03.5-c1
-  IMAGES := sysupgrade.tar nand-factory.bin
-  IMAGE/sysupgrade.tar := sysupgrade-tar | append-metadata
-  IMAGE/nand-factory.bin := append-ubi | qsdk-ipq-factory-nand
-endef
-TARGET_DEVICES += glinet_b3000

feeds/ipq807x_v5.4/ipq50xx/patches/401-add-GD5Fx-nand-support.patch

@@ -1,17 +0,0 @@
-Index: linux-5.4.164-qsdk-26349818b464f8c7b52d59ce73579d9f3dd6bd5d/drivers/mtd/nand/raw/nand_ids.c
-===================================================================
---- linux-5.4.164-qsdk-26349818b464f8c7b52d59ce73579d9f3dd6bd5d.orig/drivers/mtd/nand/raw/nand_ids.c
-+++ linux-5.4.164-qsdk-26349818b464f8c7b52d59ce73579d9f3dd6bd5d/drivers/mtd/nand/raw/nand_ids.c
-@@ -86,6 +86,12 @@ struct nand_flash_dev nand_flash_ids[] =
- 	{"GD5F1GQ5REYIH SPI NAND 1G 1.8V",
- 		{ .id = {0xc8, 0x21} },
- 		SZ_2K, SZ_128, SZ_128K, 0, 2, 64, NAND_ECC_INFO(4, SZ_512), 0},
-+	{"GD5F1GM7REYIG SPI NAND 1G-BIT",
-+		{.id = {0xc8, 0x81}},
-+		SZ_2K, SZ_128, SZ_128K, 0, 2, 128, NAND_ECC_INFO(8,SZ_512), 0},
-+	{"GD5F2GM7REYIG SPI NAND 2G 8-bit",
-+		{.id = {0xc8, 0x82}},
-+		SZ_2K, SZ_256, SZ_128K, 0, 2, 128, NAND_ECC_INFO(8,SZ_512), 0},
- 	{"W25N01JW SPI NAND 1.8V 1G-BIT",
- 		{ .id = {0xef, 0xbc} },
- 		SZ_2K, SZ_128, SZ_128K, 0, 2, 64, NAND_ECC_INFO(4, SZ_512), 0},

feeds/ipq807x_v5.4/ipq60xx/base-files/etc/board.d/01_leds

@@ -13,7 +13,6 @@ cig,wf188n)
 	ucidef_set_led_netdev "wan" "WAN" "green:wan" "eth0" "tx rx link"
         ucidef_set_led_wlan "wlan5g" "WLAN5G" "green:wifi5" "phy0tpt"
         ucidef_set_led_wlan "wlan2g" "WLAN2G" "green:wifi2" "phy1tpt"
-        ucidef_set_led_default "power" "POWER" "green:power" "on"
 	;;
 edgecore,eap101)
         ucidef_set_led_wlan "wlan5g" "WLAN5G" "green:wifi5" "phy0tpt"
@@ -21,7 +20,6 @@ edgecore,eap101)
 	ucidef_set_led_netdev "lan1" "lan1" "green:lan1" "eth1"
 	ucidef_set_led_netdev "lan2" "lan2" "green:lan2" "eth2"
 	ucidef_set_led_netdev "poe" "poe" "green:wan" "eth0"
-        ucidef_set_led_default "power" "POWER" "green:led_pwr" "on"
 	;;
 hfcl,ion4xi|\
 hfcl,ion4x|\

feeds/ipq807x_v5.4/ipq60xx/base-files/etc/board.d/02_network

@@ -34,10 +34,6 @@ qcom_setup_interfaces()
 		ucidef_set_interface_lan "eth1"
 		ucidef_set_interface_wan "eth0"
 		;;
-       cig,wf660a)
-		ucidef_set_interface_wan "eth0"		
-		;;
-
 	yuncore,fap650)
 		ucidef_set_interface_lan "eth3 eth2 eth1 eth0"
 		ucidef_set_interface_wan "eth4"
@@ -64,17 +60,7 @@ qcom_setup_macs()
 		lan_mac=$(macaddr_add "$wan_mac" 1)
 		ucidef_set_network_device_mac eth0 $wan_mac
 		ucidef_set_network_device_mac eth1 $lan_mac
-                ucidef_set_label_macaddr $wan_mac
-		;;
-	cig,wf660a)
-		mmc_dev=$(find_mtd_chardev "0:APPSBLENV")
-		[ -z "$mmc_dev" ] && mmc_dev=$(find_mmc_part "0:APPSBLENV")
-		[ -z "$mmc_dev" ] && return
-		mac=$(grep BaseMacAddress= $mmc_dev | cut -dx -f2)
-		[ -z "$mac" ] && return;
-		wan_mac=$(macaddr_canonicalize $mac)
-		ucidef_set_network_device_mac eth0 $wan_mac
-		ip link set eth0 address $wan_mac
+		ucidef_set_label_macaddr $wan_mac
 		;;
 	yuncore,ax840)
 		wan_mac=$(cat /sys/class/net/eth1/address)

feeds/ipq807x_v5.4/ipq60xx/base-files/etc/hotplug.d/firmware/10-ath11k-caldata

@@ -36,20 +36,6 @@ ath11k_generate_macs_ion4x() {
 	echo -ne \\x${wifimac2//:/\\x} >> /lib/firmware/ath11k-macs
 }
 
-ath11k_generate_macs_wf660a() {
-	touch /lib/firmware/ath11k-macs
-	mmc_dev=$(find_mtd_chardev "0:APPSBLENV")
-	[ -z "$mmc_dev" ] && mmc_dev=$(find_mmc_part "0:APPSBLENV")
-	[ -n "$mmc_dev" ] && mac=$(grep BaseMacAddress= $mmc_dev | cut -dx -f2)
-	eth=$(macaddr_canonicalize $mac)
-	mac1=$(macaddr_add $eth 1)
-	mac2=$(macaddr_add $eth 2)
-	mac3=$(macaddr_add $eth 3)
-	echo -ne \\x${mac1//:/\\x} >> /lib/firmware/ath11k-macs
-	echo -ne \\x${mac2//:/\\x} >> /lib/firmware/ath11k-macs
-	echo -ne \\x${mac3//:/\\x} >> /lib/firmware/ath11k-macs
-}
-
 caldata_die() {
         echo "caldata: " "$*"
         exit 1
@@ -74,7 +60,6 @@ case "$FIRMWARE" in
 "ath11k/IPQ6018/hw1.0/caldata.bin")
 	case "$board" in
 	cig,wf188n|\
-	cig,wf660a|\
 	edgecore,eap101|\
 	hfcl,ion4xi|\
 	hfcl,ion4x|\
@@ -112,9 +97,6 @@ ath11k-macs)
 	cig,wf188n)
 		ath11k_generate_macs
 		;;
-	cig,wf660a)
-		ath11k_generate_macs_wf660a
-		;;
 	esac
 	;;
 ath11k/IPQ6018/hw1.0/board.bin)

feeds/ipq807x_v5.4/ipq60xx/base-files/etc/hotplug.d/firmware/11-ath11k-pdev-stats

@@ -1,31 +0,0 @@
-#!/bin/sh
-
-. /lib/functions.sh
-
-board=$(board_name)
-
-case "$board" in
-    "edgecore,eap101")
-        ln -s /sys/kernel/debug/ath11k/ipq6018\ hw1.0/mac0/fw_stats/pdev_stats /tmp/pdev_stats_phy0
-        ln -s /sys/kernel/debug/ath11k/ipq6018\ hw1.0/mac1/fw_stats/pdev_stats /tmp/pdev_stats_phy1
-        ;;
-    "edgecore,eap102")
-        ln -s /sys/kernel/debug/ath11k/ipq8074\ hw2.0/mac0/fw_stats/pdev_stats /tmp/pdev_stats_phy0
-        ln -s /sys/kernel/debug/ath11k/ipq8074\ hw2.0/mac1/fw_stats/pdev_stats /tmp/pdev_stats_phy1
-        ;;
-    "edgecore,oap101e-6e"|\
-    "edgecore,oap101-6e")
-        ln -s /sys/kernel/debug/ath11k/ipq5018\ hw1.0/mac0/fw_stats/pdev_stats /tmp/pdev_stats_phy0
-        ln -s /sys/kernel/debug/ath11k/qcn6122_1/mac0/fw_stats/pdev_stats /tmp/pdev_stats_phy1
-        ln -s /sys/kernel/debug/ath11k/qcn6122_2/mac0/fw_stats/pdev_stats /tmp/pdev_stats_phy2
-        ;;
-    "edgecore,oap101e"|\
-    "edgecore,oap101")
-        ln -s /sys/kernel/debug/ath11k/ipq5018\ hw1.0/mac0/fw_stats/pdev_stats /tmp/pdev_stats_phy0
-        ln -s /sys/kernel/debug/ath11k/qcn6122_1/mac0/fw_stats/pdev_stats /tmp/pdev_stats_phy1
-        ;;
-    "edgecore,eap104")
-        ln -s /sys/kernel/debug/ath11k/ipq5018\ hw1.0/mac0/fw_stats/pdev_stats /tmp/pdev_stats_phy0
-        ln -s /sys/kernel/debug/ath11k/qcn6122_2/mac0/fw_stats/pdev_stats /tmp/pdev_stats_phy1
-        ;;
-esac

feeds/ipq807x_v5.4/ipq60xx/base-files/lib/upgrade/platform.sh

@@ -49,52 +49,6 @@ do_flash_emmc() {
 	tar Oxf $tar_file ${board_dir}/$part | dd of=${emmcblock}
 }
 
-spi_nor_emmc_do_upgrade_bootconfig() {
-	local tar_file="$1"
-
-	local board_dir=$(tar tf $tar_file | grep -m 1 '^sysupgrade-.*/$')
-	board_dir=${board_dir%/}
-	[ -f /proc/boot_info/getbinary_bootconfig ] || {
-		echo "bootconfig does not exist"
-		exit
-	}
-	CI_ROOTPART="$(cat /proc/boot_info/rootfs/upgradepartition)"
-	CI_KERNPART="$(cat /proc/boot_info/0:HLOS/upgradepartition)"
-
-	[ -n "$CI_KERNPART" -a -n "$CI_ROOTPART" ] || {
-		echo "kernel or rootfs partition is unknown"
-		exit
-	}
-
-	local primary="0"
-	[ "$(cat /proc/boot_info/rootfs/primaryboot)" = "0" ] && primary="1"
-	echo "$primary" > /proc/boot_info/rootfs/primaryboot 2>/dev/null
-	echo "$primary" > /proc/boot_info/0:HLOS/primaryboot 2>/dev/null
-	cp /proc/boot_info/getbinary_bootconfig /tmp/bootconfig
-
-	do_flash_emmc $tar_file $CI_KERNPART $board_dir kernel
-	do_flash_emmc $tar_file $CI_ROOTPART $board_dir root
-
-	local emmcblock="$(find_mmc_part "rootfs_data")"
-	if [ -e "$emmcblock" ]; then
-		mkfs.ext4 -F "$emmcblock"
-	fi
-
-	for part in "0:BOOTCONFIG" "0:BOOTCONFIG1"; do
-               local mtdchar=$(echo $(find_mtd_chardev $part) | sed 's/^.\{5\}//')
-               if [ -n "$mtdchar" ]; then
-                       echo start to update $mtdchar
-                       mtd -qq write /proc/boot_info/getbinary_bootconfig "/dev/${mtdchar}" 2>/dev/null && echo update mtd $mtdchar
-               else
-                       emmcblock=$(find_mmc_part $part)
-                       echo erase ${emmcblock}
-                       dd if=/dev/zero of=${emmcblock} 2> /dev/null
-                       echo update $emmcblock
-                       dd if=/tmp/bootconfig of=${emmcblock} 2> /dev/null
-               fi
-	done
-}
-
 emmc_do_upgrade() {
 	local tar_file="$1"
 
@@ -113,7 +67,6 @@ platform_check_image() {
 	local magic_long="$(get_magic_long "$1")"
 	board=$(board_name)
 	case $board in
-	cig,wf660a|\
 	cig,wf188n|\
 	cig,wf194c4|\
 	cig,wf196|\
@@ -142,9 +95,6 @@ platform_do_upgrade() {
 
 	board=$(board_name)
 	case $board in
-	cig,wf660a)
-		spi_nor_emmc_do_upgrade_bootconfig $1
-		;;
 	cig,wf188n|\
 	glinet,ax1800|\
 	glinet,axt1800|\

feeds/ipq807x_v5.4/ipq60xx/files/arch/arm64/boot/dts/qcom/qcom-ipq6018-cig-wf660a.dts

@@ -1,40 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
-/*
- * IPQ6018 CP01 board device tree source
- *
- * Copyright (c) 2019-2021 The Linux Foundation. All rights reserved.
- */
-
-/dts-v1/;
-
-#include "qcom-ipq6018-cp01-cig-wf660a.dtsi"
-
-/ {
-	model = "Cigtech WF-660a";
-        compatible = "cig,wf660a", "qcom,ipq6018-ap-cp01-c1", "qcom,ipq6018-ap-cp01", "qcom,ipq6018";	
-};
-
-&tlmm {
-	i2c_1_pins: i2c_1_pins {
-		mux {
-			pins = "gpio42", "gpio43";
-			function = "blsp2_i2c";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-	};
-};
-
-&i2c_1 {
-	pinctrl-0 = <&i2c_1_pins>;
-	pinctrl-names = "default";
-	status = "ok";
-};
-
-&sdhc_1 {
-	status = "ok";
-};
-
-&sdhc_2 {
-	status = "disable";
-};

feeds/ipq807x_v5.4/ipq60xx/files/arch/arm64/boot/dts/qcom/qcom-ipq6018-cp01-cig-wf660a.dtsi

@@ -1,475 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
-/*
- * IPQ6018 CP01 board device tree source
- *
- * Copyright (c) 2019-2021 The Linux Foundation. All rights reserved.
- */
-
-/dts-v1/;
-
-#include "ipq6018.dtsi"
-#include "ipq6018-cpr-regulator.dtsi"
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pwm/pwm.h>
-
-/ {
-    compatible = "cig,wf660a", "qcom,ipq6018-ap-cp01", "qcom,ipq6018";
-
-	aliases {
-		serial0 = &blsp1_uart3;
-		serial1 = &blsp1_uart2;
-		sdhc1 = &sdhc_1;
-		/*
-		 * Aliases as required by u-boot
-		 * to patch MAC addresses
-		 */
-		ethernet0 = "/soc/dp1";
-		ethernet1 = "/soc/dp2";
-		ethernet2 = "/soc/dp3";
-		ethernet3 = "/soc/dp4";
-		ethernet4 = "/soc/dp5";
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-		bootargs-append = " swiotlb=1";
-	};
-};
-
-&blsp1_uart2 {
-	pinctrl-0 = <&hsuart_pins>;
-	pinctrl-names = "default";
-	qca,bt-rfr-fixup;
-	status = "ok";
-};
-
-&blsp1_uart3 {
-	pinctrl-0 = <&serial_3_pins>;
-	pinctrl-names = "default";
-	status = "ok";
-};
-
-&spi_0 {
-	pinctrl-0 = <&spi_0_pins>;
-	pinctrl-names = "default";
-	cs-select = <0>;
-	status = "ok";
-
-	m25p80@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <0>;
-		compatible = "n25q128a11";
-		linux,modalias = "m25p80", "n25q128a11";
-		spi-max-frequency = <50000000>;
-		use-default-sizes;
-	};
-};
-
-&spi_1 { /* BLSP1 QUP1 */
-	pinctrl-0 = <&spi_1_pins>;
-	pinctrl-names = "default";
-	cs-select = <0>;
-	quartz-reset-gpio = <&tlmm 79 1>;
-	status = "disabled";
-	spidev1: spi@1 {
-		compatible = "qca,spidev";
-		reg = <0>;
-		spi-max-frequency = <24000000>;
-	};
-};
-
-&i2c_0 {
-	pinctrl-0 = <&i2c_0_pins>;
-	pinctrl-names = "default";
-	status = "ok";
-};
-
-&tlmm {
-	i2c_0_pins: i2c_0_pins {
-		mux {
-			pins = "gpio69", "gpio70";
-			function = "blsp1_i2c";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-	};
-
-	i2c_1_pins: i2c_1_pins {
-		mux {
-			pins = "gpio42", "gpio43";
-			function = "blsp2_i2c";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-	};
-
-	i2c_4_pins: i2c_4_pins {
-		mux {
-			pins = "gpio55", "gpio56";
-			function = "blsp4_i2c";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-	};
-	
-	spi_0_pins: spi-0-pins {
-		pins = "gpio38", "gpio39", "gpio40", "gpio41";
-		function = "blsp0_spi";
-		drive-strength = <8>;
-		bias-pull-down;
-	};
-
-	spi_1_pins: spi_1_pins {
-		mux {
-			pins = "gpio69", "gpio71", "gpio72";
-			function = "blsp1_spi";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-		spi_cs {
-			pins = "gpio70";
-			function = "blsp1_spi";
-			drive-strength = <8>;
-			bias-disable;
-		};
-		quartz_interrupt {
-			pins = "gpio78";
-			function = "gpio";
-			input;
-			bias-disable;
-		};
-		quartz_reset {
-			pins = "gpio79";
-			function = "gpio";
-			output-low;
-			bias-disable;
-		};
-
-	};
-
-	sd_pins: sd-pinmux {
-		pins = "gpio62";
-		function = "sd_card";
-		drive-strength = <8>;
-		bias-pull-up;
-	};
-
-	mdio_pins: mdio_pinmux {
-		mux_0 {
-			pins = "gpio64";
-			function = "mdc";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
-		mux_1 {
-			pins = "gpio65";
-			function = "mdio";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
-		mux_2 {
-			pins = "gpio75";
-			function = "gpio";
-			bias-pull-up;
-		};
-		mux_3 {
-			pins = "gpio77";
-			function = "gpio";
-			bias-pull-up;
-		};
-	};
-
-	pwm_pins: pwm_pinmux {
-		mux_1 {
-			pins = "gpio22";
-			function = "pwm02";
-			drive-strength = <8>;
-		};
-		mux_2 {
-			pins = "gpio23";
-			function = "pwm12";
-			drive-strength = <8>;
-		};
-		mux_3 {
-			pins = "gpio24";
-			function = "pwm22";
-			drive-strength = <8>;
-		};
-	};
-
-	hsuart_pins: hsuart_pins {
-		mux {
-			pins = "gpio71", "gpio72";
-			function = "blsp1_uart";
-			drive-strength = <8>;
-			bias-disable;
-		};
-	};
-
-	leds_pins: leds_pins {
-		led_5g {
-			pins = "gpio35";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-		led_2g {
-			pins = "gpio37";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-		led_usb0 {
-			pins = "gpio50";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-	};
-
-	btcoex_pins: btcoex_pins {
-		mux_0 {
-			pins = "gpio51";
-			function = "pta1_1";
-			drive-strength = <6>;
-			bias-pull-down;
-		};
-		mux_1 {
-			pins = "gpio53";
-			function = "pta1_0";
-			drive-strength = <6>;
-			bias-pull-down;
-		};
-		mux_2 {
-			pins = "gpio52";
-			function = "pta1_2";
-			drive-strength = <6>;
-			bias-pull-down;
-		};
-	};
-};
-
-&soc {
-	mdio: mdio@90000 {
-		pinctrl-0 = <&mdio_pins>;
-		pinctrl-names = "default";
-		phy-reset-gpio = <&tlmm 77 0>;
-		status = "ok";
-		phy0: ethernet-phy@0 {
-			reg = <0>;
-		};
-		phy1: ethernet-phy@1 {
-			reg = <1>;
-		};
-		phy2: ethernet-phy@2 {
-			reg = <2>;
-		};
-		phy3: ethernet-phy@3 {
-			reg = <3>;
-		};
-		phy4: ethernet-phy@4 {
-			reg = <0x1c>;
-		};
-	};
-
-	dp1 {
-		device_type = "network";
-		compatible = "qcom,nss-dp";
-		qcom,id = <1>;
-		reg = <0x3a001000 0x200>;
-		qcom,mactype = <0>;
-		local-mac-address = [000000000000];
-		qcom,link-poll = <1>;
-		qcom,phy-mdio-addr = <0>;
-		phy-mode = "sgmii";
-	};
-
-	dp2 {
-		device_type = "network";
-		compatible = "qcom,nss-dp";
-		qcom,id = <2>;
-		reg = <0x3a001200 0x200>;
-		qcom,mactype = <0>;
-		local-mac-address = [000000000000];
-		qcom,link-poll = <1>;
-		qcom,phy-mdio-addr = <1>;
-		phy-mode = "sgmii";
-	};
-
-	dp3 {
-		device_type = "network";
-		compatible = "qcom,nss-dp";
-		qcom,id = <3>;
-		reg = <0x3a001400 0x200>;
-		qcom,mactype = <0>;
-		local-mac-address = [000000000000];
-		qcom,link-poll = <1>;
-		qcom,phy-mdio-addr = <2>;
-		phy-mode = "sgmii";
-	};
-
-	dp4 {
-		device_type = "network";
-		compatible = "qcom,nss-dp";
-		qcom,id = <4>;
-		reg = <0x3a001600 0x200>;
-		qcom,mactype = <0>;
-		local-mac-address = [000000000000];
-		qcom,link-poll = <1>;
-		qcom,phy-mdio-addr = <3>;
-		phy-mode = "sgmii";
-	};
-
-	dp5 {
-		device_type = "network";
-		compatible = "qcom,nss-dp";
-		qcom,id = <5>;
-		reg = <0x3a001800 0x200>;
-		qcom,mactype = <0>;
-		local-mac-address = [000000000000];
-		qcom,link-poll = <1>;
-		qcom,phy-mdio-addr = <28>;
-		phy-mode = "sgmii";
-	};
-
-	i2c_4: i2c@78b9000 {
-		compatible = "qcom,i2c-qup-v2.2.1";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x78b9000 0x600>;
-		interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&gcc GCC_BLSP1_AHB_CLK>,
-				<&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>;
-		clock-names = "iface", "core";
-		clock-frequency  = <100000>;
-		dmas = <&blsp_dma 21>, <&blsp_dma 20>;
-		dma-names = "rx", "tx";
-		pinctrl-0 = <&i2c_4_pins>;
-		status = "ok";
-	};
-
-	ess-switch@3a000000 {
-		switch_cpu_bmp = <0x1>;  /* cpu port bitmap */
-		switch_lan_bmp = <0x0>; /* lan port bitmap */
-		switch_wan_bmp = <0x20>; /* wan port bitmap */
-		switch_inner_bmp = <0xc0>; /*inner port bitmap*/
-		switch_mac_mode = <0x0>; /* mac mode for uniphy instance0*/
-		switch_mac_mode1 = <0xf>; /* mac mode for uniphy instance1*/
-		switch_mac_mode2 = <0xff>; /* mac mode for uniphy instance2*/
-		qcom,port_phyinfo {
-			port@0 {
-				port_id = <1>;
-				phy_address = <0>;
-			};
-			port@1 {
-				port_id = <2>;
-				phy_address = <1>;
-			};
-			port@2 {
-				port_id = <3>;
-				phy_address = <2>;
-			};
-			port@3 {
-				port_id = <4>;
-				phy_address = <3>;
-			};
-			port@4 {
-				port_id = <5>;
-				phy_address = <0x1c>;
-				port_mac_sel = "QGMAC_PORT";
-			};
-		};
-	};
-
-	nss-macsec0 {
-		compatible = "qcom,nss-macsec";
-		phy_addr = <0x1c>;
-		phy_access_mode = <0>;
-		mdiobus = <&mdio>;
-	};
-
-	pwm {
-		pinctrl-0 = <&pwm_pins>;
-		pinctrl-names = "default";
-		used-pwm-indices = <1>, <1>, <1>, <0>;
-		dft-pwm-status = <0>, <1>, <0>, <0>;
-		status = "ok";
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&leds_pins>;
-		pinctrl-names = "default";
-
-		led@35 {
-			label = "led_5g";
-			gpios = <&tlmm 35 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "led_5g";
-			default-state = "off";
-		};
-		led@37 {
-			label = "led_2g";
-			gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "led_2g";
-			default-state = "off";
-		};
-		led@50 {
-			label = "led_usb0";
-			gpios = <&tlmm 50 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "usb-host";
-			default-state = "off";
-		};
-	};
-};
-
-&qpic_bam {
-	status = "ok";
-};
-
-&qpic_nand {
-	status = "disable";
-};
-
-&pcie_phy {
-	status = "ok";
-};
-
-&pcie0 {
-#if defined(__CNSS2__)
-	status = "ok";
-#endif
-};
-
-&qusb_phy_0 {
-	status = "ok";
-};
-
-&qusb_phy_1 {
-	status = "ok";
-};
-
-&usb2 {
-	status = "ok";
-};
-
-&ssphy_0 {
-	status = "ok";
-};
-
-&usb3 {
-	status = "ok";
-};
-
-&nss_crypto {
-	status = "ok";
-};
-
-&sd_pwrseq {
-	status = "disable";
-};
-
-&ipq6018_l2 {
-	status = "disable";
-};

feeds/ipq807x_v5.4/ipq60xx/image/ipq60xx.mk

@@ -2,17 +2,6 @@ KERNEL_LOADADDR := 0x41080000
 
 DEVICE_VARS += CE_TYPE
 
-define Device/cig_wf660a
-  DEVICE_TITLE := Cigtech WF-660a
-  DEVICE_DTS := qcom-ipq6018-cig-wf660a
-  SUPPORTED_DEVICES := cig,wf660a
-  DEVICE_DTS_CONFIG := config@cp01-c1
-  DEVICE_PACKAGES := ath11k-wifi-cig-wf660a uboot-env uboot-envtools
-  IMAGES := sysupgrade.tar mmc-factory.bin
-  IMAGE/mmc-factory.bin := append-ubi | qsdk-ipq-factory-mmc
-endef
-TARGET_DEVICES += cig_wf660a
-
 define Device/cig_wf188n
   DEVICE_TITLE := Cigtech WF-188n
   DEVICE_DTS := qcom-ipq6018-cig-wf188n

feeds/ipq807x_v5.4/ipq60xx/modules.mk

@@ -77,23 +77,6 @@ endef
 
 $(eval $(call KernelPackage,usb-dwc3-qcom-internal))
 
-define KernelPackage/diag-char
-  TITLE:=CHAR DIAG
-  KCONFIG:= CONFIG_DIAG_MHI=y@ge5.4 \
-          CONFIG_DIAG_OVER_PCIE=n@ge5.4 \
-          CONFIG_DIAGFWD_BRIDGE_CODE=y \
-          CONFIG_DIAG_CHAR=m
-  DEPENDS:=+kmod-lib-crc-ccitt
-  FILES:=$(LINUX_DIR)/drivers/char/diag/diagchar.ko
-endef
-
-define KernelPackage/diag-char/description
- CHAR DIAG
-endef
-
-$(eval $(call KernelPackage,diag-char))
-
-
 define KernelPackage/bootconfig
   SUBMENU:=Other modules
   TITLE:=Bootconfig partition for failsafe

feeds/ipq807x_v5.4/ipq807x/base-files/etc/board.d/01_leds

@@ -17,15 +17,10 @@ edgecore,oap102)
 	ucidef_set_led_netdev "poe" "poe" "green:wan" "eth0"
         ucidef_set_led_wlan "wlan5g" "WLAN5G" "green:wifi5" "phy0tpt"
         ucidef_set_led_wlan "wlan2g" "WLAN2G" "green:wifi2" "phy1tpt"
-        ucidef_set_led_wlan "power" "POWER" "green:power" "default-on"
 	;;
-sonicfi,rap630w-311g|\
 cybertan,eww631-b1)
 	ucidef_set_led_default "power" "POWER" "sys:blue" "on"
 	;;
-cig,wf196)
-        ucidef_set_led_default "power" "POWER" "green:status" "on"
-	;;
 esac
 
 board_config_flush

feeds/ipq807x_v5.4/ipq807x/base-files/etc/hotplug.d/firmware/11-ath11k-pdev-stats

@@ -1,31 +0,0 @@
-#!/bin/sh
-
-. /lib/functions.sh
-
-board=$(board_name)
-
-case "$board" in
-    "edgecore,eap101")
-        ln -s /sys/kernel/debug/ath11k/ipq6018\ hw1.0/mac0/fw_stats/pdev_stats /tmp/pdev_stats_phy0
-        ln -s /sys/kernel/debug/ath11k/ipq6018\ hw1.0/mac1/fw_stats/pdev_stats /tmp/pdev_stats_phy1
-        ;;
-    "edgecore,eap102")
-        ln -s /sys/kernel/debug/ath11k/ipq8074\ hw2.0/mac0/fw_stats/pdev_stats /tmp/pdev_stats_phy0
-        ln -s /sys/kernel/debug/ath11k/ipq8074\ hw2.0/mac1/fw_stats/pdev_stats /tmp/pdev_stats_phy1
-        ;;
-    "edgecore,oap101e-6e"|\
-    "edgecore,oap101-6e")
-        ln -s /sys/kernel/debug/ath11k/ipq5018\ hw1.0/mac0/fw_stats/pdev_stats /tmp/pdev_stats_phy0
-        ln -s /sys/kernel/debug/ath11k/qcn6122_1/mac0/fw_stats/pdev_stats /tmp/pdev_stats_phy1
-        ln -s /sys/kernel/debug/ath11k/qcn6122_2/mac0/fw_stats/pdev_stats /tmp/pdev_stats_phy2
-        ;;
-    "edgecore,oap101e"|\
-    "edgecore,oap101")
-        ln -s /sys/kernel/debug/ath11k/ipq5018\ hw1.0/mac0/fw_stats/pdev_stats /tmp/pdev_stats_phy0
-        ln -s /sys/kernel/debug/ath11k/qcn6122_1/mac0/fw_stats/pdev_stats /tmp/pdev_stats_phy1
-        ;;
-    "edgecore,eap104")
-        ln -s /sys/kernel/debug/ath11k/ipq5018\ hw1.0/mac0/fw_stats/pdev_stats /tmp/pdev_stats_phy0
-        ln -s /sys/kernel/debug/ath11k/qcn6122_2/mac0/fw_stats/pdev_stats /tmp/pdev_stats_phy1
-        ;;
-esac

feeds/ipq807x_v5.4/mac80211/patches/pending/331-mac80211-Update-tx-stats-correctly-in-case-of-AP-mod.patch

@@ -1,30 +0,0 @@
-From f3eaf64231edde8b6553f869cf33ff2b2897be38 Mon Sep 17 00:00:00 2001
-From: Venkat Chimata <venkata@shasta.cloud>
-Date: Mon, 8 Jul 2024 19:23:34 +0530
-Subject: [PATCH] mac80211: Update tx stats correctly in case of AP mode
-
-In the backports driver the tx stats are updated in ieee80211_8023_xmit.
-However in AP mode the packets are transmitted in ieee80211_8023_xmit_ap.
-ieee80211_8023_xmit is not hit in case of AP mode. Update the stats just
-before calling ieee80211_8023_xmit_ap
-
-Signed-off-by: Venkat Chimata <venkata@shasta.cloud>
----
- net/mac80211/tx.c | 1 +
- 1 file changed, 1 insertion(+)
-
-diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c
-index d6181be..9e978f9 100644
---- a/net/mac80211/tx.c
-+++ b/net/mac80211/tx.c
-@@ -4526,6 +4526,7 @@ void ieee80211_8023_xmit_ap(struct ieee80211_sub_if_data *sdata,
- 
- 	control.sta = pubsta;
- 
-+	ieee80211_tx_stats(dev, skb->len);
- 	drv_tx(local, &control, skb);
- 
- 	if (sta)
--- 
-2.34.1
-

feeds/ipq807x_v5.4/mac80211/patches/pending/999-fix-monitor-mode.patch

@@ -1,26 +0,0 @@
---- a/drivers/net/wireless/ath/ath11k/rx_desc.h
-+++ b/drivers/net/wireless/ath/ath11k/rx_desc.h
-@@ -1375,11 +1375,9 @@ struct hal_rx_desc_ipq8074 {
- 	__le32 mpdu_end_tag;
- 	struct rx_mpdu_end mpdu_end;
- 	u8 rx_padding1[HAL_RX_DESC_PADDING1_BYTES];
--#ifndef CPTCFG_ATH11K_MEM_PROFILE_512M
- 	__le32 hdr_status_tag;
- 	__le32 phy_ppdu_id;
- 	u8 hdr_status[HAL_RX_DESC_HDR_STATUS_LEN];
--#endif
- 	u8 msdu_payload[0];
- } __packed;
- 
-@@ -1396,11 +1394,9 @@ struct hal_rx_desc_qcn9074 {
- 	__le32 mpdu_end_tag;
- 	struct rx_mpdu_end mpdu_end;
- 	u8 rx_padding1[HAL_RX_DESC_PADDING1_BYTES];
--#ifndef CPTCFG_ATH11K_MEM_PROFILE_512M
- 	__le32 hdr_status_tag;
- 	__le32 phy_ppdu_id;
- 	u8 hdr_status[HAL_RX_DESC_HDR_STATUS_LEN];
--#endif
- 	u8 msdu_payload[0];
- } __packed;
- 

feeds/ipq807x_v5.4/qca-ssdk/patches/300-fdb.patch

@@ -57,9 +57,9 @@ Index: qca-ssdk/src/init/ssdk_init.c
 +				entry.fid = fdb_entry.fid;
 +
 +				if (SW_OK != fal_fdb_entry_del_bymac(0, &entry)) 
-+					SSDK_INFO("failed to delete FDB entry\n");
++					printk("failed to delete FDB entry\n");
 +				else
-+					SSDK_INFO("deleted %s/%d\n", data, entry.fid);
++					printk("deleted %s/%d\n", data, entry.fid);
 +			}
 +
 +			ret = fal_fdb_entry_extend_getnext(0, &fdb_op, &fdb_entry);

feeds/ipq95xx/hostapd/files/hostapd.sh

@@ -252,7 +252,7 @@ hostapd_prepare_device_config() {
 	[ "$maxassoc_ignore_probe" -gt 0 ] && append base_cfg "no_probe_resp_if_max_sta=1" "$N"
 	[ "$rnr_beacon" -gt 0 ] && append base_cfg "rnr_beacon=$rnr_beacon" "$N"
 #	[ "$he_co_locate" -gt 0 ] && append base_cfg "he_co_locate=$he_co_locate" "$N"
-	[ "$multiple_bssid" -gt 0 ] && append base_cfg "mbssid=$multiple_bssid" "$N"
+	[ "$multiple_bssid" -gt 0 ] && append base_cfg "multiple_bssid=$multiple_bssid" "$N"
 	[ "$ema" -gt 0 ] && append base_cfg "ema=$ema" "$N"
 	[ "$mlo" -gt 0 ] && append base_cfg "mlo=1" "$N"
 	[ "$acs_exclude_dfs" -gt 0 ] && append base_cfg "acs_exclude_dfs=$acs_exclude_dfs" "$N"

feeds/ipq95xx/ipq53xx/base-files/etc/board.d/02_network

@@ -1,8 +1,6 @@
 #!/bin/sh
 
 . /lib/functions/uci-defaults.sh
-. /lib/functions.sh
-. /lib/functions/system.sh
 
 ipq53xx_setup_interfaces()
 {
@@ -12,9 +10,7 @@ ipq53xx_setup_interfaces()
 	qcom,ipq9574-ap-al02-c4)
 		ucidef_set_interfaces_lan_wan "eth1 eth2 eth3 eth4 eth5" "eth0"
 		;;
-	cig,wf189)
-		ucidef_set_interfaces_lan_wan "eth0" "eth1"
-		;;
+	cig,wf189|\
 	edgecore,eap105|\
 	sercomm,ap72tip)
 		ucidef_set_interfaces_lan_wan "eth1" "eth0"
@@ -22,36 +18,9 @@ ipq53xx_setup_interfaces()
 	esac
 }
 
-qcom_setup_macs()
-{
-        local board="$1"
-
-        case $board in
-        cig,wf189)
-                mtd=$(find_mtd_chardev "0:APPSBLENV")
-                [ -z "$mtd" ] && return;
-                mac=$(grep BaseMacAddress= $mtd | cut -dx -f2)
-                [ -z "$mac" ] && return;
-                wan_mac=$(macaddr_canonicalize $mac)
-                lan_mac=$(macaddr_add "$wan_mac" 1)
-                ucidef_set_network_device_mac eth0 $lan_mac
-                ucidef_set_network_device_mac eth1 $wan_mac
-                ucidef_set_label_macaddr $wan_mac
-                ;;
-        *)
-                wan_mac=$(cat /sys/class/net/eth1/address)
-                lan_mac=$(macaddr_add "$wan_mac" 1)
-                ;;
-        esac
-        [ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" $lan_mac
-        [ -n "$wan_mac" ] && ucidef_set_interface_macaddr "wan" $wan_mac
-        [ -n "$wan_mac" ] && ucidef_set_label_macaddr "$wan_mac"
-}
-
 board_config_update
 board=$(board_name)
 ipq53xx_setup_interfaces $board
-qcom_setup_macs $board
 board_config_flush
 
 exit 0

feeds/ipq95xx/ipq53xx/base-files/etc/hotplug.d/firmware/ath12k-pdev-stats

@@ -1,13 +0,0 @@
-#!/bin/sh
-
-. /lib/functions.sh
-
-board=$(board_name)
-
-case "$board" in
-    "edgecore,eap105")
-        ln -s /sys/kernel/debug/ath12k/ipq5332\ hw1.0_c000000.wifi/mac0/fw_stats/pdev_stats /tmp/pdev_stats_phy0
-        ln -s /sys/kernel/debug/ath12k/qcn9274\ hw2.0_0001:01:00.0/mac0/fw_stats/pdev_stats /tmp/pdev_stats_phy1
-        ln -s /sys/kernel/debug/ath12k/qcn9274\ hw2.0_0001:01:00.0/mac1/fw_stats/pdev_stats /tmp/pdev_stats_phy2
-        ;;
-esac

feeds/mediatek-sdk/hostapd/files/hostapd.sh

@@ -47,8 +47,8 @@ hostapd_append_wpa_key_mgmt() {
 			[ "${ieee80211w:-0}" -gt 0 ] && append wpa_key_mgmt "WPA-${auth_type_l}-SHA256"
 		;;
 		eap192)
-			[ "${ieee80211r:-0}" -gt 0 ] || append wpa_key_mgmt "WPA-EAP-SUITE-B-192"
-			[ "${ieee80211r:-0}" -gt 0 ] && append wpa_key_mgmt "FT-EAP-SHA384"
+			append wpa_key_mgmt "WPA-EAP-SUITE-B-192"
+			[ "${ieee80211r:-0}" -gt 0 ] && append wpa_key_mgmt "FT-EAP"
 		;;
 		eap-eap2)
 			append wpa_key_mgmt "WPA-EAP"
@@ -73,10 +73,6 @@ hostapd_append_wpa_key_mgmt() {
 		owe)
 			append wpa_key_mgmt "OWE"
 		;;
-		psk2-radius)
-			append wpa_key_mgmt "WPA-PSK"
-			[ "${ieee80211r:-0}" -gt 0 ] && append wpa_key_mgmt "FT-PSK"
-		;;
 	esac
 
 	[ "$fils" -gt 0 ] && {
@@ -130,30 +126,9 @@ hostapd_common_add_device_config() {
 
 	config_add_boolean multiple_bssid rnr_beacon he_co_locate ema
 
-	config_add_boolean afc
-	config_add_string \
-		afc_request_version afc_request_id afc_serial_number \
-		afc_location_type afc_location afc_height afc_height_type
-	config_add_array afc_cert_ids afc_freq_range afc_op_class
-	config_add_int \
-		afc_min_power afc_major_axis afc_minor_axis afc_orientation \
-		afc_vertical_tolerance
-
 	hostapd_add_log_config
 }
 
-
-hostapd_get_list() {
-	local var="$1"
-	local field="$2"
-
-	local cur __val_list
-	json_get_values __val_list "$field"
-	for cur in $__val_list; do
-		append "$var" "$cur" ","
-	done
-}
-
 hostapd_prepare_device_config() {
 	local config="$1"
 	local driver="$2"
@@ -164,7 +139,7 @@ hostapd_prepare_device_config() {
 		acs_chan_bias local_pwr_constraint spectrum_mgmt_required airtime_mode cell_density \
 		rts_threshold beacon_rate rssi_reject_assoc_rssi rssi_ignore_probe_request maxassoc \
 		multiple_bssid he_co_locate rnr_beacon ema acs_exclude_dfs \
-		maxassoc_ignore_probe band
+		maxassoc_ignore_probe
 
 	hostapd_set_log_options base_cfg
 
@@ -277,45 +252,6 @@ hostapd_prepare_device_config() {
 	[ "$multiple_bssid" -gt 0 ] && append base_cfg "multiple_bssid=$multiple_bssid" "$N"
 	[ "$ema" -gt 0 ] && append base_cfg "ema=$ema" "$N"
 	[ "$acs_exclude_dfs" -gt 0 ] && append base_cfg "acs_exclude_dfs=$acs_exclude_dfs" "$N"
-	if [ "$band" = "6g" ]; then
-		json_get_vars afc he_6ghz_reg_pwr_type
-	else
-		afc=0
-		he_6ghz_reg_pwr_type=
-	fi
-	set_default afc 0
-	[ "$afc" -gt 0 ] && {
-		for v in afc_request_version afc_request_id afc_serial_number afc_min_power afc_height afc_height_type afc_vertical_tolerance \
-				 afc_major_axis afc_minor_axis afc_orientation; do
-			json_get_var val $v
-			append base_cfg "$v=$val" "$N"
-		done
-
-		for v in afc_cert_ids afc_op_class afc_freq_range; do
-			val=
-			hostapd_get_list val $v
-			append base_cfg "$v=$val" "$N"
-		done
-
-		json_get_vars afc_location_type afc_location
-		case "$afc_location_type" in
-			ellipse)
-				append base_cfg "afc_location_type=0" "$N"
-				append base_cfg "afc_linear_polygon=$afc_location" "$N"
-			;;
-			linear_polygon)
-				append base_cfg "afc_location_type=1" "$N"
-				append base_cfg "afc_linear_polygon=$afc_location" "$N"
-			;;
-			radial_polygon)
-				append base_cfg "afc_location_type=2" "$N"
-				append base_cfg "afc_radial_polygon=$afc_location" "$N"
-			;;
-		esac
-
-		he_6ghz_reg_pwr_type=1
-	}
-	[ -n "$he_6ghz_reg_pwr_type" ] && append base_cfg "he_6ghz_reg_pwr_type=$he_6ghz_reg_pwr_type" "$N"
 
 	json_get_values opts hostapd_options
 	for val in $opts; do
@@ -408,8 +344,8 @@ hostapd_common_add_bss_config() {
 	config_add_string lci civic
 
 	config_add_boolean ieee80211r pmk_r1_push ft_psk_generate_local ft_over_ds
-	config_add_int r0_key_lifetime reassociation_deadline ft_l2_refresh
-	config_add_string mobility_domain r1_key_holder ft_key
+	config_add_int r0_key_lifetime reassociation_deadline
+	config_add_string mobility_domain r1_key_holder
 	config_add_array r0kh r1kh
 
 	config_add_int ieee80211w_max_timeout ieee80211w_retry_timeout
@@ -503,7 +439,6 @@ hostapd_set_psk() {
 	local ifname="$1"
 
 	rm -f /var/run/hostapd-${ifname}.psk
-	touch /var/run/hostapd-${ifname}.psk
 	for_each_station hostapd_set_psk_file ${ifname}
 }
 
@@ -667,7 +602,7 @@ append_radius_server() {
 	set_default dae_port 3799
 	set_default request_cui 0
 
-	[ "$eap_server" -eq 0  -a -n "$auth_server" ] && {
+	[ "$eap_server" -eq 0 ] && {
 		append bss_conf "auth_server_addr=$auth_server" "$N"
 		append bss_conf "auth_server_port=$auth_port" "$N"
 		append bss_conf "auth_server_shared_secret=$auth_secret" "$N"
@@ -789,7 +724,8 @@ hostapd_set_bss_options() {
 		[ -n "$wpa_strict_rekey" ] && append bss_conf "wpa_strict_rekey=$wpa_strict_rekey" "$N"
 	}
 
-	[ -n "$nasid" ] && append bss_conf "nas_identifier=$nasid" "$N"
+	set_default nasid "${macaddr//\:}"
+	append bss_conf "nas_identifier=$nasid" "$N"
 
 	[ -n "$acct_server" ] && {
 		append bss_conf "acct_server_addr=$acct_server" "$N"
@@ -836,7 +772,9 @@ hostapd_set_bss_options() {
 			# with WPS enabled, we got to be in unconfigured state.
 			wps_not_configured=1
 			vlan_possible=1
-			append_radius_server
+			[ "$macfilter" = radius ] && {
+				append_radius_server
+			}
 		;;
 		psk|sae|psk-sae)
 			json_get_vars key wpa_psk_file
@@ -855,7 +793,6 @@ hostapd_set_bss_options() {
 			}
 			[ "$eapol_version" -ge "1" -a "$eapol_version" -le "2" ] && append bss_conf "eapol_version=$eapol_version" "$N"
 
-			append_radius_server
 			set_default dynamic_vlan 0
 			vlan_possible=1
 			wps_possible=1
@@ -988,11 +925,10 @@ hostapd_set_bss_options() {
 		set_default ieee80211r 0
 
 		if [ "$ieee80211r" -gt "0" ]; then
-			json_get_vars mobility_domain ft_psk_generate_local ft_over_ds reassociation_deadline ft_l2_refresh
+			json_get_vars mobility_domain ft_psk_generate_local ft_over_ds reassociation_deadline
 
 			set_default mobility_domain "$(echo "$ssid" | md5sum | head -c 4)"
 			set_default ft_over_ds 1
-			set_default ft_l2_refresh 30
 			set_default reassociation_deadline 1000
 			skip_kh_setup=0
 
@@ -1015,10 +951,9 @@ hostapd_set_bss_options() {
 			append bss_conf "ft_psk_generate_local=$ft_psk_generate_local" "$N"
 			append bss_conf "ft_over_ds=$ft_over_ds" "$N"
 			append bss_conf "reassociation_deadline=$reassociation_deadline" "$N"
-			[ -n "$ft_l2_refresh" ] && append bss_conf "ft_l2_refresh=$ft_l2_refresh" "$N"
 
 			if [ "$skip_kh_setup" -eq "0" ]; then
-				json_get_vars r0_key_lifetime r1_key_holder pmk_r1_push ft_key
+				json_get_vars r0_key_lifetime r1_key_holder pmk_r1_push
 				json_get_values r0kh r0kh
 				json_get_values r1kh r1kh
 
@@ -1026,15 +961,12 @@ hostapd_set_bss_options() {
 				set_default pmk_r1_push 0
 
 				[ -n "$r0kh" -a -n "$r1kh" ] || {
-					[ -z "$ft_key" ] && {
-						key=`echo -n "$mobility_domain/$auth_secret" | md5sum | awk '{print $1}'`
+					key=`echo -n "$mobility_domain/$auth_secret" | md5sum | awk '{print $1}'`
 
-						set_default r0kh "ff:ff:ff:ff:ff:ff,*,$key"
-						set_default r1kh "00:00:00:00:00:00,00:00:00:00:00:00,$key"
-					}
+					set_default r0kh "ff:ff:ff:ff:ff:ff,*,$key"
+					set_default r1kh "00:00:00:00:00:00,00:00:00:00:00:00,$key"
 				}
 
-				[ -n "$ft_key" ] && append bss_conf "ft_key=$ft_key" "$N"
 				[ -n "$r1_key_holder" ] && append bss_conf "r1_key_holder=$r1_key_holder" "$N"
 				append bss_conf "r0_key_lifetime=$r0_key_lifetime" "$N"
 				append bss_conf "pmk_r1_push=$pmk_r1_push" "$N"

feeds/mediatek-sdk/hostapd/patches/600-ubus_support.patch

@@ -292,7 +292,7 @@
  
 -		wpa_msg(hapd->msg_ctx, MSG_INFO, AP_STA_CONNECTED "%s%s%s%s",
 -			buf, ip_addr, keyid_buf, dpp_pkhash_buf);
-+		hostapd_ubus_notify_authorized(hapd, sta);
++		hostapd_ubus_notify_authorized(hapd, sta, auth_alg);
 +		wpa_msg(hapd->msg_ctx, MSG_INFO, AP_STA_CONNECTED "%s%s%s%s%s",
 +			buf, ip_addr, keyid_buf, dpp_pkhash_buf, alg_buf);
  
@@ -458,6 +458,16 @@
  }
  
  
+@@ -352,6 +355,9 @@ void hostapd_handle_radio_measurement(st
+ 		   mgmt->u.action.u.rrm.action, MAC2STR(mgmt->sa));
+ 
+ 	switch (mgmt->u.action.u.rrm.action) {
++	case WLAN_RRM_LINK_MEASUREMENT_REPORT:
++		hostapd_ubus_handle_link_measurement(hapd, buf, len);
++		break;
+ 	case WLAN_RRM_RADIO_MEASUREMENT_REPORT:
+ 		hostapd_handle_radio_msmt_report(hapd, buf, len);
+ 		break;
 --- a/src/ap/vlan_init.c
 +++ b/src/ap/vlan_init.c
 @@ -22,6 +22,7 @@

feeds/mediatek-sdk/hostapd/patches/601-ucode_support.patch

@@ -88,14 +88,6 @@
  void hostapd_new_assoc_sta(struct hostapd_data *hapd, struct sta_info *sta,
  			   int reassoc);
  void hostapd_interface_deinit_free(struct hostapd_iface *iface);
-@@ -732,6 +741,7 @@ hostapd_switch_channel_fallback(struct h
- void hostapd_cleanup_cs_params(struct hostapd_data *hapd);
- void hostapd_periodic_iface(struct hostapd_iface *iface);
- int hostapd_owe_trans_get_info(struct hostapd_data *hapd);
-+void hostapd_owe_update_trans(struct hostapd_iface *iface);
- void hostapd_ocv_check_csa_sa_query(void *eloop_ctx, void *timeout_ctx);
- 
- void hostapd_switch_color(struct hostapd_data *hapd, u64 bitmap);
 --- a/src/ap/hostapd.c
 +++ b/src/ap/hostapd.c
 @@ -252,6 +252,8 @@ int hostapd_reload_config(struct hostapd
@@ -115,15 +107,6 @@
  	hostapd_ubus_free_bss(hapd);
  	accounting_deinit(hapd);
  	hostapd_deinit_wpa(hapd);
-@@ -538,7 +541,7 @@ void hostapd_free_hapd_data(struct hosta
-  * Most of the modules that are initialized in hostapd_setup_bss() are
-  * deinitialized here.
-  */
--static void hostapd_cleanup(struct hostapd_data *hapd)
-+void hostapd_cleanup(struct hostapd_data *hapd)
- {
- 	wpa_printf(MSG_DEBUG, "%s(hapd=%p (%s))", __func__, hapd,
- 		   hapd->conf ? hapd->conf->iface : "N/A");
 @@ -600,6 +603,7 @@ void hostapd_cleanup_iface_partial(struc
  static void hostapd_cleanup_iface(struct hostapd_iface *iface)
  {
@@ -140,25 +123,17 @@
  
  	return 0;
  }
-@@ -1211,7 +1216,7 @@ static int hostapd_start_beacon(struct h
+@@ -1211,8 +1216,7 @@ static int hostapd_start_beacon(struct h
   * initialized. Most of the modules that are initialized here will be
   * deinitialized in hostapd_cleanup().
   */
 -static int hostapd_setup_bss(struct hostapd_data *hapd, int first,
-+int hostapd_setup_bss(struct hostapd_data *hapd, int first,
- 			     bool start_beacon)
+-			     bool start_beacon)
++int hostapd_setup_bss(struct hostapd_data *hapd, int first, bool start_beacon)
  {
  	struct hostapd_bss_config *conf = hapd->conf;
-@@ -2237,7 +2242,7 @@ static int hostapd_owe_iface_iter2(struc
- #endif /* CONFIG_OWE */
- 
- 
--static void hostapd_owe_update_trans(struct hostapd_iface *iface)
-+void hostapd_owe_update_trans(struct hostapd_iface *iface)
- {
- #ifdef CONFIG_OWE
- 	/* Check whether the enabled BSS can complete OWE transition mode
-@@ -2698,7 +2703,7 @@ hostapd_alloc_bss_data(struct hostapd_if
+ 	u8 ssid[SSID_MAX_LEN + 1];
+@@ -2698,7 +2702,7 @@ hostapd_alloc_bss_data(struct hostapd_if
  }
  
  
@@ -167,7 +142,7 @@
  {
  	if (!hapd)
  		return;
-@@ -3491,7 +3496,8 @@ int hostapd_remove_iface(struct hapd_int
+@@ -3491,7 +3495,8 @@ int hostapd_remove_iface(struct hapd_int
  		hapd_iface = interfaces->iface[i];
  		if (hapd_iface == NULL)
  			return -1;
@@ -378,7 +353,7 @@
  				     tb[NL80211_ATTR_CENTER_FREQ1],
  				     tb[NL80211_ATTR_CENTER_FREQ2],
  				     tb[NL80211_ATTR_PUNCT_BITMAP],
-+					 NULL,
++				     NULL,
  				     1);
  		break;
  	case NL80211_CMD_DISCONNECT:
@@ -576,148 +551,3 @@
  	.send_mlme = driver_nl80211_send_mlme,
  	.get_hw_feature_data = nl80211_get_hw_feature_data,
  	.sta_add = wpa_driver_nl80211_sta_add,
---- a/src/ap/ieee802_11.c
-+++ b/src/ap/ieee802_11.c
-@@ -547,11 +547,16 @@ static const char * sae_get_password(str
- 				     struct sae_pt **s_pt,
- 				     const struct sae_pk **s_pk)
- {
-+	struct hostapd_bss_config *conf = hapd->conf;
-+	struct hostapd_ssid *ssid = &conf->ssid;
-+	struct hostapd_sta_wpa_psk_short *psk;
- 	const char *password = NULL;
--	struct sae_password_entry *pw;
--	struct sae_pt *pt = NULL;
--	const struct sae_pk *pk = NULL;
--	struct hostapd_sta_wpa_psk_short *psk = NULL;
-+	struct sae_password_entry *pw = NULL;
-+ 	struct sae_pt *pt = NULL;
-+ 	const struct sae_pk *pk = NULL;
-+ 
-+	if (sta && sta->use_sta_psk)
-+		goto use_sta_psk;
- 
- 	for (pw = hapd->conf->sae_passwords; pw; pw = pw->next) {
- 		if (!is_broadcast_ether_addr(pw->peer_addr) &&
-@@ -582,6 +587,31 @@ static const char * sae_get_password(str
- 		}
- 	}
- 
-+use_sta_psk:
-+	if (!password && sta) {
-+		for (psk = sta->psk; psk; psk = psk->next) {
-+			if (!psk->is_passphrase)
-+				continue;
-+
-+			password = psk->passphrase;
-+			if (!sta->use_sta_psk)
-+				break;
-+
-+			if (sta->sae_pt) {
-+				pt = sta->sae_pt;
-+				break;
-+			}
-+
-+			pt = sae_derive_pt(conf->sae_groups, ssid->ssid,
-+					   ssid->ssid_len,
-+					   (const u8 *) password,
-+					   os_strlen(password),
-+					   NULL);
-+			sta->sae_pt = pt;
-+			break;
-+		}
-+	}
-+
- 	if (pw_entry)
- 		*pw_entry = pw;
- 	if (s_pt)
-@@ -3105,6 +3135,12 @@ static void handle_auth(struct hostapd_d
- 		goto fail;
- 	}
- 
-+	res = hostapd_ucode_sta_auth(hapd, sta);
-+	if (res) {
-+		resp = res;
-+		goto fail;
-+	}
-+
- 	sta->flags &= ~WLAN_STA_PREAUTH;
- 	ieee802_1x_notify_pre_auth(sta->eapol_sm, 0);
- 
---- a/src/ap/sta_info.c
-+++ b/src/ap/sta_info.c
-@@ -425,6 +425,9 @@ void ap_free_sta(struct hostapd_data *ha
- 	forced_memzero(sta->last_tk, WPA_TK_MAX_LEN);
- #endif /* CONFIG_TESTING_OPTIONS */
- 
-+	if (sta->sae_pt)
-+		sae_deinit_pt(sta->sae_pt);
-+
- 	os_free(sta);
- }
- 
-@@ -1326,6 +1329,8 @@ void ap_sta_set_authorized(struct hostap
- 		sta->flags &= ~WLAN_STA_AUTHORIZED;
- 	}
- 
-+	if (authorized)
-+		hostapd_ucode_sta_connected(hapd, sta);
- #ifdef CONFIG_P2P
- 	if (hapd->p2p_group == NULL) {
- 		if (sta->p2p_ie != NULL &&
---- a/src/ap/sta_info.h
-+++ b/src/ap/sta_info.h
-@@ -198,6 +198,9 @@ struct sta_info {
- 	int vlan_id_bound; /* updated by ap_sta_bind_vlan() */
- 	 /* PSKs from RADIUS authentication server */
- 	struct hostapd_sta_wpa_psk_short *psk;
-+	struct sae_pt *sae_pt;
-+	int use_sta_psk;
-+	int psk_idx;
- 
- 	char *identity; /* User-Name from RADIUS */
- 	char *radius_cui; /* Chargeable-User-Identity from RADIUS */
---- a/src/ap/wpa_auth_glue.c
-+++ b/src/ap/wpa_auth_glue.c
-@@ -341,6 +341,7 @@ static const u8 * hostapd_wpa_auth_get_p
- 	struct sta_info *sta = ap_get_sta(hapd, addr);
- 	const u8 *psk;
- 
-+	sta->psk_idx = 0;
- 	if (vlan_id)
- 		*vlan_id = 0;
- 	if (psk_len)
-@@ -387,13 +388,18 @@ static const u8 * hostapd_wpa_auth_get_p
- 	 * returned psk which should not be returned again.
- 	 * logic list (all hostapd_get_psk; all sta->psk)
- 	 */
-+	if (sta && sta->use_sta_psk)
-+		psk = NULL;
- 	if (sta && sta->psk && !psk) {
- 		struct hostapd_sta_wpa_psk_short *pos;
-+		int psk_idx;
- 
- 		if (vlan_id)
- 			*vlan_id = 0;
- 		psk = sta->psk->psk;
-+		sta->psk_idx = psk_idx = 1;
- 		for (pos = sta->psk; pos; pos = pos->next) {
-+			psk_idx++;
- 			if (pos->is_passphrase) {
- 				if (pbkdf2_sha1(pos->passphrase,
- 						hapd->conf->ssid.ssid,
-@@ -406,10 +412,14 @@ static const u8 * hostapd_wpa_auth_get_p
- 				pos->is_passphrase = 0;
- 			}
- 			if (pos->psk == prev_psk) {
-+				sta->psk_idx = psk_idx;
- 				psk = pos->next ? pos->next->psk : NULL;
- 				break;
- 			}
- 		}
-+
-+		if (!psk)
-+			sta->psk_idx = 0;
- 	}
- 	return psk;
- }

feeds/mediatek-sdk/hostapd/patches/751-wispr-ft.patch

@@ -1,539 +0,0 @@
---- a/src/ap/wpa_auth.h
-+++ b/src/ap/wpa_auth.h
-@@ -16,7 +16,11 @@
- 
- struct vlan_description;
- struct mld_info;
--
-+struct rate_description {
-+	u32 rx;
-+	u32 tx;
-+};
-+ 
- #define MAX_OWN_IE_OVERRIDE 256
- 
- #ifdef _MSC_VER
-@@ -88,6 +92,7 @@ struct ft_rrb_frame {
- #define FT_RRB_IDENTITY      15
- #define FT_RRB_RADIUS_CUI    16
- #define FT_RRB_SESSION_TIMEOUT  17 /* le32 seconds */
-+#define FT_RRB_RATE_LIMIT	18
- 
- struct ft_rrb_tlv {
- 	le16 type;
-@@ -368,6 +373,10 @@ struct wpa_auth_callbacks {
- 			struct vlan_description *vlan);
- 	int (*get_vlan)(void *ctx, const u8 *sta_addr,
- 			struct vlan_description *vlan);
-+	int (*set_rate_limit)(void *ctx, const u8 *sta_addr,
-+			      struct rate_description *rate);
-+	int (*get_rate_limit)(void *ctx, const u8 *sta_addr,
-+			      struct rate_description *rate);
- 	int (*set_identity)(void *ctx, const u8 *sta_addr,
- 			    const u8 *identity, size_t identity_len);
- 	size_t (*get_identity)(void *ctx, const u8 *sta_addr, const u8 **buf);
-@@ -536,7 +545,7 @@ int wpa_ft_fetch_pmk_r1(struct wpa_authe
- 			struct vlan_description *vlan,
- 			const u8 **identity, size_t *identity_len,
- 			const u8 **radius_cui, size_t *radius_cui_len,
--			int *session_timeout);
-+			int *session_timeout, struct rate_description *rate);
- 
- #endif /* CONFIG_IEEE80211R_AP */
- 
---- a/src/ap/wpa_auth_glue.c
-+++ b/src/ap/wpa_auth_glue.c
-@@ -1200,6 +1200,40 @@ static int hostapd_wpa_auth_get_vlan(voi
- }
- 
- 
-+static int hostapd_wpa_auth_set_rate_limit(void *ctx, const u8 *sta_addr,
-+					   struct rate_description *rate)
-+{
-+	struct hostapd_data *hapd = ctx;
-+	struct sta_info *sta;
-+
-+	sta = ap_get_sta(hapd, sta_addr);
-+	if (!sta || !sta->wpa_sm)
-+		return -1;
-+
-+	memcpy(sta->bandwidth, rate, sizeof(*rate));
-+	hostapd_logger(hapd, sta->addr, HOSTAPD_MODULE_IEEE80211,
-+		       HOSTAPD_LEVEL_INFO, "rate-limit %d %d", sta->bandwidth[0], sta->bandwidth[1]);
-+
-+	return 0;
-+}
-+
-+
-+static int hostapd_wpa_auth_get_rate_limit(void *ctx, const u8 *sta_addr,
-+					   struct rate_description *rate)
-+{
-+	struct hostapd_data *hapd = ctx;
-+	struct sta_info *sta;
-+
-+	sta = ap_get_sta(hapd, sta_addr);
-+	if (!sta)
-+		return -1;
-+
-+	memcpy(rate, sta->bandwidth, sizeof(*rate));
-+
-+	return 0;
-+}
-+
-+
- static int
- hostapd_wpa_auth_set_identity(void *ctx, const u8 *sta_addr,
- 			      const u8 *identity, size_t identity_len)
-@@ -1640,6 +1674,8 @@ int hostapd_setup_wpa(struct hostapd_dat
- 		.add_tspec = hostapd_wpa_auth_add_tspec,
- 		.set_vlan = hostapd_wpa_auth_set_vlan,
- 		.get_vlan = hostapd_wpa_auth_get_vlan,
-+		.set_rate_limit = hostapd_wpa_auth_set_rate_limit,
-+		.get_rate_limit = hostapd_wpa_auth_get_rate_limit,
- 		.set_identity = hostapd_wpa_auth_set_identity,
- 		.get_identity = hostapd_wpa_auth_get_identity,
- 		.set_radius_cui = hostapd_wpa_auth_set_radius_cui,
---- a/src/ap/wpa_auth_ft.c
-+++ b/src/ap/wpa_auth_ft.c
-@@ -379,6 +379,14 @@ static size_t wpa_ft_vlan_len(const stru
- 	return tlv_len;
- }
- 
-+static size_t wpa_ft_rate_limit_len(const struct rate_description *rate)
-+{
-+	if (!rate || (!rate->rx && !rate->tx))
-+		return 0;
-+
-+	return (sizeof(struct ft_rrb_tlv) + 8);
-+}
-+
- 
- static size_t wpa_ft_vlan_lin(const struct vlan_description *vlan,
- 			      u8 *start, u8 *endpos)
-@@ -434,10 +442,48 @@ static size_t wpa_ft_vlan_lin(const stru
- }
- 
- 
-+static size_t wpa_ft_rate_limit_lin(const struct rate_description *rate,
-+				    u8 *start, u8 *endpos)
-+{
-+	size_t tlv_len;
-+	int i, len;
-+	struct ft_rrb_tlv *hdr;
-+	u8 *pos = start;
-+
-+	if (!rate)
-+		return 0;
-+
-+	tlv_len = 0;
-+	if (rate->rx || rate->tx) {
-+		tlv_len += sizeof(*hdr);
-+		if (start + tlv_len > endpos)
-+			return tlv_len;
-+		hdr = (struct ft_rrb_tlv *) pos;
-+		hdr->type = host_to_le16(FT_RRB_RATE_LIMIT);
-+		hdr->len = host_to_le16(2 * sizeof(le32));
-+		pos = start + tlv_len;
-+
-+		tlv_len += sizeof(u32);
-+		if (start + tlv_len > endpos)
-+			return tlv_len;
-+		WPA_PUT_LE32(pos, rate->rx);
-+		pos = start + tlv_len;
-+		tlv_len += sizeof(u32);
-+		if (start + tlv_len > endpos)
-+			return tlv_len;
-+		WPA_PUT_LE32(pos, rate->tx);
-+		pos = start + tlv_len;
-+	}
-+
-+	return tlv_len;
-+}
-+
-+
- static int wpa_ft_rrb_lin(const struct tlv_list *tlvs1,
- 			  const struct tlv_list *tlvs2,
- 			  const struct vlan_description *vlan,
--			  u8 **plain, size_t *plain_len)
-+			  u8 **plain, size_t *plain_len,
-+			  const struct rate_description *rate)
- {
- 	u8 *pos, *endpos;
- 	size_t tlv_len;
-@@ -445,6 +491,7 @@ static int wpa_ft_rrb_lin(const struct t
- 	tlv_len = wpa_ft_tlv_len(tlvs1);
- 	tlv_len += wpa_ft_tlv_len(tlvs2);
- 	tlv_len += wpa_ft_vlan_len(vlan);
-+	tlv_len += wpa_ft_rate_limit_len(rate);
- 
- 	*plain_len = tlv_len;
- 	*plain = os_zalloc(tlv_len);
-@@ -458,6 +505,7 @@ static int wpa_ft_rrb_lin(const struct t
- 	pos += wpa_ft_tlv_lin(tlvs1, pos, endpos);
- 	pos += wpa_ft_tlv_lin(tlvs2, pos, endpos);
- 	pos += wpa_ft_vlan_lin(vlan, pos, endpos);
-+	pos += wpa_ft_rate_limit_lin(rate, pos, endpos);
- 
- 	/* validity check */
- 	if (pos != endpos) {
-@@ -526,7 +574,8 @@ static int wpa_ft_rrb_build(const u8 *ke
- 			    const struct tlv_list *tlvs_auth,
- 			    const struct vlan_description *vlan,
- 			    const u8 *src_addr, u8 type,
--			    u8 **packet, size_t *packet_len)
-+			    u8 **packet, size_t *packet_len,
-+			    const struct rate_description *rate)
- {
- 	u8 *plain = NULL, *auth = NULL, *pos, *tmp;
- 	size_t plain_len = 0, auth_len = 0;
-@@ -534,10 +583,10 @@ static int wpa_ft_rrb_build(const u8 *ke
- 	size_t pad_len = 0;
- 
- 	*packet = NULL;
--	if (wpa_ft_rrb_lin(tlvs_enc0, tlvs_enc1, vlan, &plain, &plain_len) < 0)
-+	if (wpa_ft_rrb_lin(tlvs_enc0, tlvs_enc1, vlan, &plain, &plain_len, rate) < 0)
- 		goto out;
- 
--	if (wpa_ft_rrb_lin(tlvs_auth, NULL, NULL, &auth, &auth_len) < 0)
-+	if (wpa_ft_rrb_lin(tlvs_auth, NULL, NULL, &auth, &auth_len, NULL) < 0)
- 		goto out;
- 
- 	*packet_len = sizeof(u16) + auth_len + plain_len;
-@@ -700,6 +749,24 @@ static int wpa_ft_get_vlan(struct wpa_au
- }
- 
- 
-+static int wpa_ft_get_rate_limit(struct wpa_authenticator *wpa_auth,
-+				 const u8 *sta_addr, struct rate_description *rate)
-+{
-+	if (!wpa_auth->cb->get_rate_limit)
-+		return -1;
-+	return wpa_auth->cb->get_rate_limit(wpa_auth->cb_ctx, sta_addr, rate);
-+}
-+
-+
-+static int wpa_ft_set_rate_limit(struct wpa_authenticator *wpa_auth,
-+				 const u8 *sta_addr, struct rate_description *rate)
-+{
-+	if (!wpa_auth->cb->set_rate_limit)
-+		return -1;
-+	return wpa_auth->cb->set_rate_limit(wpa_auth->cb_ctx, sta_addr, rate);
-+}
-+
-+
- static int
- wpa_ft_set_identity(struct wpa_authenticator *wpa_auth, const u8 *sta_addr,
- 		    const u8 *identity, size_t identity_len)
-@@ -1025,7 +1092,7 @@ wpa_ft_rrb_seq_req(struct wpa_authentica
- 
- 	if (wpa_ft_rrb_build(key, key_len, NULL, NULL, seq_req_auth, NULL,
- 			     wpa_auth->addr, FT_PACKET_R0KH_R1KH_SEQ_REQ,
--			     &packet, &packet_len) < 0) {
-+			     &packet, &packet_len, NULL) < 0) {
- 		item = NULL; /* some other seq resp might still accept this */
- 		goto err;
- 	}
-@@ -1208,6 +1275,7 @@ struct wpa_ft_pmk_r0_sa {
- 	u8 spa[ETH_ALEN];
- 	int pairwise; /* Pairwise cipher suite, WPA_CIPHER_* */
- 	struct vlan_description *vlan;
-+	struct rate_description *rate;
- 	os_time_t expiration; /* 0 for no expiration */
- 	u8 *identity;
- 	size_t identity_len;
-@@ -1226,6 +1294,7 @@ struct wpa_ft_pmk_r1_sa {
- 	u8 spa[ETH_ALEN];
- 	int pairwise; /* Pairwise cipher suite, WPA_CIPHER_* */
- 	struct vlan_description *vlan;
-+	struct rate_description *rate;
- 	u8 *identity;
- 	size_t identity_len;
- 	u8 *radius_cui;
-@@ -1254,6 +1323,7 @@ static void wpa_ft_free_pmk_r0(struct wp
- 
- 	os_memset(r0->pmk_r0, 0, PMK_LEN_MAX);
- 	os_free(r0->vlan);
-+	os_free(r0->rate);
- 	os_free(r0->identity);
- 	os_free(r0->radius_cui);
- 	os_free(r0);
-@@ -1307,6 +1377,7 @@ static void wpa_ft_free_pmk_r1(struct wp
- 	eloop_cancel_timeout(wpa_ft_expire_pmk_r1, r1, NULL);
- 
- 	os_memset(r1->pmk_r1, 0, PMK_LEN_MAX);
-+	os_free(r1->rate);
- 	os_free(r1->vlan);
- 	os_free(r1->identity);
- 	os_free(r1->radius_cui);
-@@ -1360,7 +1431,8 @@ static int wpa_ft_store_pmk_r0(struct wp
- 			       const struct vlan_description *vlan,
- 			       int expires_in, int session_timeout,
- 			       const u8 *identity, size_t identity_len,
--			       const u8 *radius_cui, size_t radius_cui_len)
-+			       const u8 *radius_cui, size_t radius_cui_len,
-+			       struct rate_description *rate)
- {
- 	struct wpa_ft_pmk_cache *cache = wpa_auth->ft_pmk_cache;
- 	struct wpa_ft_pmk_r0_sa *r0;
-@@ -1388,6 +1460,14 @@ static int wpa_ft_store_pmk_r0(struct wp
- 		}
- 		*r0->vlan = *vlan;
- 	}
-+	if (rate) {
-+		r0->rate = os_zalloc(sizeof(*rate));
-+		if (!r0->rate) {
-+			bin_clear_free(r0, sizeof(*r0));
-+			return -1;
-+		}
-+		*r0->rate = *rate;
-+	}
- 	if (identity) {
- 		r0->identity = os_malloc(identity_len);
- 		if (r0->identity) {
-@@ -1447,7 +1527,8 @@ static int wpa_ft_store_pmk_r1(struct wp
- 			       const struct vlan_description *vlan,
- 			       int expires_in, int session_timeout,
- 			       const u8 *identity, size_t identity_len,
--			       const u8 *radius_cui, size_t radius_cui_len)
-+			       const u8 *radius_cui, size_t radius_cui_len,
-+			       struct rate_description *rate)
- {
- 	struct wpa_ft_pmk_cache *cache = wpa_auth->ft_pmk_cache;
- 	int max_expires_in = wpa_auth->conf.r1_max_key_lifetime;
-@@ -1477,6 +1558,14 @@ static int wpa_ft_store_pmk_r1(struct wp
- 		}
- 		*r1->vlan = *vlan;
- 	}
-+	if (rate) {
-+		r1->rate = os_zalloc(sizeof(*rate));
-+		if (!r1->rate) {
-+			bin_clear_free(r1, sizeof(*r1));
-+			return -1;
-+		}
-+		*r1->rate = *rate;
-+	}
- 	if (identity) {
- 		r1->identity = os_malloc(identity_len);
- 		if (r1->identity) {
-@@ -1513,7 +1602,7 @@ int wpa_ft_fetch_pmk_r1(struct wpa_authe
- 			struct vlan_description *vlan,
- 			const u8 **identity, size_t *identity_len,
- 			const u8 **radius_cui, size_t *radius_cui_len,
--			int *session_timeout)
-+			int *session_timeout, struct rate_description *rate)
- {
- 	struct wpa_ft_pmk_cache *cache = wpa_auth->ft_pmk_cache;
- 	struct wpa_ft_pmk_r1_sa *r1;
-@@ -1533,6 +1622,12 @@ int wpa_ft_fetch_pmk_r1(struct wpa_authe
- 				*vlan = *r1->vlan;
- 			if (vlan && !r1->vlan)
- 				os_memset(vlan, 0, sizeof(*vlan));
-+			if (rate) {
-+				if (r1->rate)
-+					*rate = *r1->rate;
-+				else
-+					memset(rate, 0, sizeof(*rate));
-+			}
- 			if (identity && identity_len) {
- 				*identity = r1->identity;
- 				*identity_len = r1->identity_len;
-@@ -2059,7 +2154,7 @@ static int wpa_ft_pull_pmk_r1(struct wpa
- 
- 	if (wpa_ft_rrb_build(key, key_len, req_enc, NULL, req_auth, NULL,
- 			     sm->wpa_auth->addr, FT_PACKET_R0KH_R1KH_PULL,
--			     &packet, &packet_len) < 0)
-+			     &packet, &packet_len, NULL) < 0)
- 		return -1;
- 
- 	ft_pending_req_ies = wpabuf_alloc_copy(ies, ies_len);
-@@ -2088,6 +2183,7 @@ int wpa_ft_store_pmk_fils(struct wpa_sta
- {
- 	int expires_in = sm->wpa_auth->conf.r0_key_lifetime;
- 	struct vlan_description vlan;
-+	struct rate_description rate;
- 	const u8 *identity, *radius_cui;
- 	size_t identity_len, radius_cui_len;
- 	int session_timeout;
-@@ -2099,6 +2195,7 @@ int wpa_ft_store_pmk_fils(struct wpa_sta
- 			   MAC2STR(sm->addr));
- 		return -1;
- 	}
-+	wpa_ft_get_rate_limit(sm->wpa_auth, sm->addr, &rate);
- 
- 	identity_len = wpa_ft_get_identity(sm->wpa_auth, sm->addr, &identity);
- 	radius_cui_len = wpa_ft_get_radius_cui(sm->wpa_auth, sm->addr,
-@@ -2108,7 +2205,7 @@ int wpa_ft_store_pmk_fils(struct wpa_sta
- 	return wpa_ft_store_pmk_r0(sm->wpa_auth, sm->addr, pmk_r0, pmk_r0_len,
- 				   pmk_r0_name, sm->pairwise, &vlan, expires_in,
- 				   session_timeout, identity, identity_len,
--				   radius_cui, radius_cui_len);
-+				   radius_cui, radius_cui_len, &rate);
- }
- 
- 
-@@ -2172,6 +2269,7 @@ void wpa_auth_ft_store_keys(struct wpa_s
- 	int psk_local = sm->wpa_auth->conf.ft_psk_generate_local;
- 	int expires_in = sm->wpa_auth->conf.r0_key_lifetime;
- 	struct vlan_description vlan;
-+	struct rate_description rate;
- 	const u8 *identity, *radius_cui;
- 	size_t identity_len, radius_cui_len;
- 	int session_timeout;
-@@ -2185,6 +2283,8 @@ void wpa_auth_ft_store_keys(struct wpa_s
- 		return;
- 	}
- 
-+	wpa_ft_get_rate_limit(sm->wpa_auth, sm->addr, &rate);
-+
- 	identity_len = wpa_ft_get_identity(sm->wpa_auth, sm->addr, &identity);
- 	radius_cui_len = wpa_ft_get_radius_cui(sm->wpa_auth, sm->addr,
- 					       &radius_cui);
-@@ -2195,11 +2295,12 @@ void wpa_auth_ft_store_keys(struct wpa_s
- 			    pmk_r0_name,
- 			    sm->pairwise, &vlan, expires_in,
- 			    session_timeout, identity, identity_len,
--			    radius_cui, radius_cui_len);
-+			    radius_cui, radius_cui_len, &rate);
- 	wpa_ft_store_pmk_r1(sm->wpa_auth, sm->addr, pmk_r1, key_len,
- 			    sm->pmk_r1_name, sm->pairwise, &vlan,
- 			    expires_in, session_timeout, identity,
--			    identity_len, radius_cui, radius_cui_len);
-+			    identity_len, radius_cui, radius_cui_len,
-+			    &rate);
- }
- 
- 
-@@ -3100,7 +3201,8 @@ static int wpa_ft_local_derive_pmk_r1(st
- 				      const u8 **radius_cui,
- 				      size_t *radius_cui_len,
- 				      int *out_session_timeout,
--				      size_t *pmk_r1_len)
-+				      size_t *pmk_r1_len,
-+				      struct rate_description *rate)
- {
- 	struct wpa_auth_config *conf = &wpa_auth->conf;
- 	const struct wpa_ft_pmk_r0_sa *r0;
-@@ -3136,7 +3238,8 @@ static int wpa_ft_local_derive_pmk_r1(st
- 			    out_pmk_r1_name,
- 			    sm->pairwise, r0->vlan, expires_in, session_timeout,
- 			    r0->identity, r0->identity_len,
--			    r0->radius_cui, r0->radius_cui_len);
-+			    r0->radius_cui, r0->radius_cui_len,
-+			    r0->rate);
- 
- 	*out_pairwise = sm->pairwise;
- 	if (vlan) {
-@@ -3146,6 +3249,13 @@ static int wpa_ft_local_derive_pmk_r1(st
- 			os_memset(vlan, 0, sizeof(*vlan));
- 	}
- 
-+	if (rate) {
-+		if (r0->rate)
-+			*rate = *r0->rate;
-+		else
-+			os_memset(rate, 0, sizeof(*rate));
-+	}
-+
- 	if (identity && identity_len) {
- 		*identity = r0->identity;
- 		*identity_len = r0->identity_len;
-@@ -3178,6 +3288,7 @@ static int wpa_ft_process_auth_req(struc
- 	u8 *pos, *end;
- 	int pairwise, session_timeout = 0;
- 	struct vlan_description vlan;
-+	struct rate_description rate = {};
- 	const u8 *identity, *radius_cui;
- 	size_t identity_len = 0, radius_cui_len = 0;
- 	size_t pmk_r1_len, kdk_len, len;
-@@ -3274,7 +3385,7 @@ static int wpa_ft_process_auth_req(struc
- 					pmk_r1, &pmk_r1_len, &pairwise, &vlan,
- 					&identity, &identity_len, &radius_cui,
- 					&radius_cui_len,
--					&session_timeout) == 0) {
-+					&session_timeout, &rate) == 0) {
- 			wpa_printf(MSG_DEBUG,
- 				   "FT: Found PMKR1Name (using SHA%zu) from local cache",
- 				   pmk_r1_len * 8);
-@@ -3290,7 +3401,7 @@ static int wpa_ft_process_auth_req(struc
- 				       pmk_r1_name, pmk_r1, &pairwise,
- 				       &vlan, &identity, &identity_len,
- 				       &radius_cui, &radius_cui_len,
--				       &session_timeout, &pmk_r1_len) == 0) {
-+				       &session_timeout, &pmk_r1_len, &rate) == 0) {
- 		wpa_printf(MSG_DEBUG,
- 			   "FT: Generated PMK-R1 based on local PMK-R0");
- 		goto pmk_r1_derived;
-@@ -3392,6 +3503,7 @@ pmk_r1_derived:
- 		wpa_printf(MSG_DEBUG, "FT: Failed to configure VLAN");
- 		goto out;
- 	}
-+	wpa_ft_set_rate_limit(sm->wpa_auth, sm->addr, &rate);
- 	if (wpa_ft_set_identity(sm->wpa_auth, sm->addr,
- 				identity, identity_len) < 0 ||
- 	    wpa_ft_set_radius_cui(sm->wpa_auth, sm->addr,
-@@ -3973,7 +4085,7 @@ static int wpa_ft_rrb_build_r0(const u8
- 
- 	ret = wpa_ft_rrb_build(key, key_len, tlvs, sess_tlv, tlv_auth,
- 			       pmk_r0->vlan, src_addr, type,
--			       packet, packet_len);
-+			       packet, packet_len, pmk_r0->rate);
- 
- 	forced_memzero(pmk_r1, sizeof(pmk_r1));
- 
-@@ -4113,7 +4225,7 @@ static int wpa_ft_rrb_rx_pull(struct wpa
- 		ret = wpa_ft_rrb_build(key, key_len, resp, NULL, resp_auth,
- 				       NULL, wpa_auth->addr,
- 				       FT_PACKET_R0KH_R1KH_RESP,
--				       &packet, &packet_len);
-+				       &packet, &packet_len, NULL);
- 	} else {
- 		ret = wpa_ft_rrb_build_r0(key, key_len, resp, r0, f_r1kh_id,
- 					  f_s1kh_id, resp_auth, wpa_auth->addr,
-@@ -4165,11 +4277,15 @@ static int wpa_ft_rrb_rx_r1(struct wpa_a
- 	size_t f_expires_in_len;
- 	size_t f_identity_len, f_radius_cui_len;
- 	size_t f_session_timeout_len;
-+	size_t f_rate_len;
-+	const u8 *f_rate;
- 	int pairwise;
- 	int ret = -1;
- 	int expires_in;
- 	int session_timeout;
- 	struct vlan_description vlan;
-+	struct rate_description rate;
-+	int has_rate = 0;
- 	size_t pmk_r1_len;
- 
- 	RRB_GET_AUTH(FT_RRB_R0KH_ID, r0kh_id, msgtype, -1);
-@@ -4279,6 +4395,13 @@ static int wpa_ft_rrb_rx_r1(struct wpa_a
- 	wpa_printf(MSG_DEBUG, "FT: vlan %d%s",
- 		   le_to_host16(vlan.untagged), vlan.tagged[0] ? "+" : "");
- 
-+	RRB_GET_OPTIONAL(FT_RRB_RATE_LIMIT, rate, msgtype, 2 * sizeof(le32));
-+	if (f_rate) {
-+		memcpy(&rate, f_rate, sizeof(rate));
-+		rate.rx = le_to_host32(rate.rx);
-+		rate.tx = le_to_host32(rate.tx);
-+		has_rate = 1;
-+	};
- 	RRB_GET_OPTIONAL(FT_RRB_IDENTITY, identity, msgtype, -1);
- 	if (f_identity)
- 		wpa_hexdump_ascii(MSG_DEBUG, "FT: Identity", f_identity,
-@@ -4301,7 +4424,7 @@ static int wpa_ft_rrb_rx_r1(struct wpa_a
- 				f_pmk_r1_name,
- 				pairwise, &vlan, expires_in, session_timeout,
- 				f_identity, f_identity_len, f_radius_cui,
--				f_radius_cui_len) < 0)
-+				f_radius_cui_len, has_rate ? &rate : 0) < 0)
- 		goto out;
- 
- 	ret = 0;
-@@ -4614,7 +4737,7 @@ static int wpa_ft_rrb_rx_seq_req(struct
- 
- 	if (wpa_ft_rrb_build(key, key_len, NULL, NULL, seq_resp_auth, NULL,
- 			     wpa_auth->addr, FT_PACKET_R0KH_R1KH_SEQ_RESP,
--			     &packet, &packet_len) < 0)
-+			     &packet, &packet_len, NULL) < 0)
- 		goto out;
- 
- 	wpa_ft_rrb_oui_send(wpa_auth, src_addr,

feeds/mediatek-sdk/hostapd/patches/999-ft-anonce.patch

@@ -1,10 +0,0 @@
---- a/src/ap/wpa_auth_i.h
-+++ b/src/ap/wpa_auth_i.h
-@@ -54,6 +54,7 @@ struct wpa_state_machine {
- 	bool MICVerified;
- 	bool GUpdateStationKeys;
- 	u8 ANonce[WPA_NONCE_LEN];
-+	struct os_reltime ANonce_time;
- 	u8 SNonce[WPA_NONCE_LEN];
- 	u8 alt_SNonce[WPA_NONCE_LEN];
- 	u8 alt_replay_counter[WPA_REPLAY_COUNTER_LEN];

feeds/mediatek-sdk/hostapd/patches/999-re-assoc-event.patch

@@ -1,147 +0,0 @@
---- a/src/ap/ieee802_11.c
-+++ b/src/ap/ieee802_11.c
-@@ -522,6 +522,7 @@ static void handle_auth_ft_finish(void *
- 
- 	hostapd_logger(hapd, dst, HOSTAPD_MODULE_IEEE80211,
- 		       HOSTAPD_LEVEL_DEBUG, "authentication OK (FT)");
-+	hostapd_ubus_notify(hapd, "ft-finish", sta->addr);
- 	sta->flags |= WLAN_STA_AUTH;
- 	mlme_authenticate_indication(hapd, sta);
- }
-@@ -5273,6 +5274,8 @@ static void handle_assoc(struct hostapd_
- 	}
- 
- 	sta = ap_get_sta(hapd, mgmt->sa);
-+	if (sta && reassoc)
-+		memcpy(sta->origin_ap, mgmt->u.reassoc_req.current_ap, 6);
- #ifdef CONFIG_IEEE80211R_AP
- 	if (sta && sta->auth_alg == WLAN_AUTH_FT &&
- 	    (sta->flags & WLAN_STA_AUTH) == 0) {
-@@ -5426,6 +5429,7 @@ static void handle_assoc(struct hostapd_
- 		.type = HOSTAPD_UBUS_ASSOC_REQ,
- 		.mgmt_frame = mgmt,
- 		.ssi_signal = rssi,
-+		.reassoc = reassoc,
- 	};
- 
- 	/* followed by SSID and Supported rates; and HT capabilities if 802.11n
-@@ -6496,7 +6500,7 @@ static void handle_assoc_cb(struct hosta
- 		 * Open, static WEP, FT protocol, or FILS; no separate
- 		 * authorization step.
- 		 */
--		ap_sta_set_authorized(hapd, sta, 1);
-+		_ap_sta_set_authorized(hapd, sta, 1, reassoc);
- 	}
- 
- 	if (reassoc)
---- a/src/ap/ubus.c
-+++ b/src/ap/ubus.c
-@@ -1870,6 +1870,8 @@ int hostapd_ubus_handle_event(struct hos
- 	if (req->ssi_signal)
- 		blobmsg_add_u32(&b, "signal", req->ssi_signal);
- 	blobmsg_add_u32(&b, "freq", hapd->iface->freq);
-+	if (req->reassoc && req->mgmt_frame)
-+		blobmsg_add_macaddr(&b, "origin", req->mgmt_frame->u.reassoc_req.current_ap);
- 
- 	if (req->elems) {
- 		if(req->elems->ht_capabilities)
-@@ -1940,6 +1942,7 @@ void hostapd_ubus_notify(struct hostapd_
- 	blob_buf_init(&b, 0);
- 	blobmsg_add_macaddr(&b, "address", addr);
- 	blobmsg_add_string(&b, "ifname", hapd->conf->iface);
-+	blobmsg_printf(&b, "target", MACSTR, MAC2STR(hapd->conf->bssid));
- 
- 	ubus_notify(ctx, &hapd->ubus.obj, type, b.head, -1);
- }
-@@ -1958,7 +1961,7 @@ void hostapd_ubus_notify_csa(struct host
- }
- 
- 
--void hostapd_ubus_notify_authorized(struct hostapd_data *hapd, struct sta_info *sta)
-+void hostapd_ubus_notify_authorized(struct hostapd_data *hapd, struct sta_info *sta, int reassoc)
- {
- 	if (!hapd->ubus.obj.has_subscribers)
- 		return;
-@@ -1975,6 +1978,9 @@ void hostapd_ubus_notify_authorized(stru
- 		blobmsg_add_u32(&b, "", sta->bandwidth[1]);
- 		blobmsg_close_array(&b, r);
- 	}
-+	if (reassoc)
-+		blobmsg_add_macaddr(&b, "origin", sta->origin_ap);
-+	blobmsg_printf(&b, "target", MACSTR, MAC2STR(hapd->conf->bssid));
- 
- 	ubus_notify(ctx, &hapd->ubus.obj, "sta-authorized", b.head, -1);
- }
---- a/src/ap/ubus.h
-+++ b/src/ap/ubus.h
-@@ -22,6 +22,7 @@ struct hostapd_ubus_request {
- 	const struct ieee802_11_elems *elems;
- 	int ssi_signal; /* dBm */
- 	const u8 *addr;
-+	int reassoc;
- };
- 
- struct hostapd_iface;
-@@ -49,7 +50,7 @@ void hostapd_ubus_remove_vlan(struct hos
- 
- int hostapd_ubus_handle_event(struct hostapd_data *hapd, struct hostapd_ubus_request *req);
- void hostapd_ubus_notify(struct hostapd_data *hapd, const char *type, const u8 *mac);
--void hostapd_ubus_notify_authorized(struct hostapd_data *hapd, struct sta_info *sta);
-+void hostapd_ubus_notify_authorized(struct hostapd_data *hapd, struct sta_info *sta, int reassoc);
- void hostapd_ubus_notify_beacon_report(struct hostapd_data *hapd,
- 				       const u8 *addr, u8 token, u8 rep_mode,
- 				       struct rrm_measurement_beacon_report *rep,
---- a/src/ap/sta_info.c
-+++ b/src/ap/sta_info.c
-@@ -1297,8 +1297,8 @@ const u8 * ap_sta_wpa_get_dpp_pkhash(str
- }
- 
- 
--void ap_sta_set_authorized(struct hostapd_data *hapd, struct sta_info *sta,
--			   int authorized)
-+void _ap_sta_set_authorized(struct hostapd_data *hapd, struct sta_info *sta,
-+			    int authorized, int reassoc)
- {
- 	const u8 *dev_addr = NULL;
- 	char buf[100];
-@@ -1404,7 +1404,7 @@ void ap_sta_set_authorized(struct hostap
- 					 dpp_pkhash, SHA256_MAC_LEN);
- 		}
- 
--		hostapd_ubus_notify_authorized(hapd, sta);
-+		hostapd_ubus_notify_authorized(hapd, sta, reassoc);
- 		wpa_msg(hapd->msg_ctx, MSG_INFO, AP_STA_CONNECTED "%s%s%s%s%s",
- 			buf, ip_addr, keyid_buf, dpp_pkhash_buf, alg_buf);
- 
-@@ -1434,6 +1434,11 @@ void ap_sta_set_authorized(struct hostap
- 	}
- #endif /* CONFIG_FST */
- }
-+void ap_sta_set_authorized(struct hostapd_data *hapd, struct sta_info *sta,
-+			   int authorized)
-+{
-+	_ap_sta_set_authorized(hapd, sta, authorized, 0);
-+}
- 
- 
- void ap_sta_disconnect(struct hostapd_data *hapd, struct sta_info *sta,
---- a/src/ap/sta_info.h
-+++ b/src/ap/sta_info.h
-@@ -102,6 +102,7 @@ struct sta_info {
- 	struct sta_info *next; /* next entry in sta list */
- 	struct sta_info *hnext; /* next entry in hash table list */
- 	u8 addr[6];
-+	u8 origin_ap[6];
- 	be32 ipaddr;
- 	struct dl_list ip6addr; /* list head for struct ip6addr */
- 	u16 aid; /* STA's unique AID (1 .. 2007) or 0 if not yet assigned */
-@@ -398,6 +399,9 @@ const u8 * ap_sta_wpa_get_dpp_pkhash(str
- void ap_sta_disconnect(struct hostapd_data *hapd, struct sta_info *sta,
- 		       const u8 *addr, u16 reason);
- 
-+void _ap_sta_set_authorized(struct hostapd_data *hapd,
-+			    struct sta_info *sta, int authorized,
-+			    int reassoc);
- void ap_sta_set_authorized(struct hostapd_data *hapd,
- 			   struct sta_info *sta, int authorized);
- static inline int ap_sta_is_authorized(struct sta_info *sta)

feeds/mediatek-sdk/hostapd/patches/t00-010-ft_refresh.patch

@@ -1,86 +0,0 @@
---- a/hostapd/config_file.c
-+++ b/hostapd/config_file.c
-@@ -3152,6 +3152,8 @@ static int hostapd_config_fill(struct ho
- 		bss->ft_over_ds = atoi(pos);
- 	} else if (os_strcmp(buf, "ft_psk_generate_local") == 0) {
- 		bss->ft_psk_generate_local = atoi(pos);
-+	} else if (os_strcmp(buf, "ft_l2_refresh") == 0) {
-+		bss->ft_l2_refresh = atoi(pos);
- #endif /* CONFIG_IEEE80211R_AP */
- #ifndef CONFIG_NO_CTRL_IFACE
- 	} else if (os_strcmp(buf, "ctrl_interface") == 0) {
---- a/src/ap/ap_config.h
-+++ b/src/ap/ap_config.h
-@@ -401,6 +401,7 @@ struct hostapd_bss_config {
- 	int pmk_r1_push;
- 	int ft_over_ds;
- 	int ft_psk_generate_local;
-+	int ft_l2_refresh;
- 	int r1_max_key_lifetime;
- #endif /* CONFIG_IEEE80211R_AP */
- 
---- a/src/ap/wpa_auth_glue.c
-+++ b/src/ap/wpa_auth_glue.c
-@@ -1495,6 +1495,28 @@ static void hostapd_request_radius_psk(v
- #endif /* CONFIG_NO_RADIUS */
- 
- 
-+static void wpa_ft_refresh(void *eloop_data, void *user_data)
-+{
-+	struct hostapd_data *hapd = eloop_data;
-+	struct ft_rrb_frame *frame;
-+	struct l2_ethhdr *buf;
-+	size_t len;
-+
-+	len = sizeof(*buf) + sizeof(*frame);
-+	buf = os_zalloc(len);
-+	frame = (struct ft_rrb_frame *)(buf + 1);
-+	frame->frame_type = RSN_REMOTE_FRAME_TYPE_FT_RRB;
-+	frame->packet_type = FT_PACKET_REQUEST;
-+	memset(buf->h_dest, 0xff, ETH_ALEN);
-+	os_memcpy(buf->h_source, hapd->own_addr, ETH_ALEN);
-+	buf->h_proto = host_to_be16(ETH_P_RRB);
-+	l2_packet_send(hapd->l2, buf->h_dest, ETH_P_RRB, (u8 *) buf, len);
-+	os_free(buf);
-+
-+	eloop_register_timeout(hapd->conf->ft_l2_refresh, 0, wpa_ft_refresh,
-+			       hapd, NULL);
-+}
-+
- int hostapd_setup_wpa(struct hostapd_data *hapd)
- {
- 	struct wpa_auth_config _conf;
-@@ -1640,6 +1662,9 @@ int hostapd_setup_wpa(struct hostapd_dat
- 				   "Failed to open ETH_P_OUI interface");
- 			return -1;
- 		}
-+
-+		if (hapd->conf->ft_l2_refresh)
-+			wpa_ft_refresh(hapd, NULL);
- 	}
- #endif /* CONFIG_IEEE80211R_AP */
- 
-@@ -1655,7 +1680,6 @@ void hostapd_reconfig_wpa(struct hostapd
- 	wpa_reconfig(hapd->wpa_auth, &wpa_auth_conf);
- }
- 
--
- void hostapd_deinit_wpa(struct hostapd_data *hapd)
- {
- 	ieee80211_tkip_countermeasures_deinit(hapd);
-@@ -1679,6 +1703,7 @@ void hostapd_deinit_wpa(struct hostapd_d
- 				   "information element from interface %s",
- 				   hapd->conf->iface);
- 		}
-+
- 	}
- 	ieee802_1x_deinit(hapd);
- 
-@@ -1687,6 +1712,7 @@ void hostapd_deinit_wpa(struct hostapd_d
- 	hostapd_wpa_ft_rrb_rx_later(hapd, NULL); /* flush without delivering */
- 	eloop_cancel_timeout(hostapd_oui_deliver_later, hapd, ELOOP_ALL_CTX);
- 	hostapd_oui_deliver_later(hapd, NULL); /* flush without delivering */
-+	eloop_cancel_timeout(wpa_ft_refresh, hapd, ELOOP_ALL_CTX);
- 	l2_packet_deinit(hapd->l2);
- 	hapd->l2 = NULL;
- 	hostapd_wpa_unregister_ft_oui(hapd);

feeds/mediatek-sdk/hostapd/patches/t00-011-owe_ssid_update.patch

@@ -1,27 +0,0 @@
---- a/src/ap/hostapd.c
-+++ b/src/ap/hostapd.c
-@@ -1995,6 +1995,13 @@ static int hostapd_owe_iface_iter(struct
- 		    is_zero_ether_addr(bss->own_addr))
- 			continue;
- 
-+		if (!os_memcmp(hapd->conf->owe_transition_bssid, bss->own_addr,
-+			       ETH_ALEN) &&
-+		    hapd->conf->owe_transition_ssid_len == bss->conf->ssid.ssid_len &&
-+		    !os_memcmp(hapd->conf->owe_transition_ssid, bss->conf->ssid.ssid,
-+			       bss->conf->ssid.ssid_len))
-+			return 0;
-+
- 		os_memcpy(hapd->conf->owe_transition_bssid, bss->own_addr,
- 			  ETH_ALEN);
- 		os_memcpy(hapd->conf->owe_transition_ssid,
-@@ -2011,10 +2018,6 @@ static int hostapd_owe_iface_iter(struct
- 
- int hostapd_owe_trans_get_info(struct hostapd_data *hapd)
- {
--	if (hapd->conf->owe_transition_ssid_len > 0 &&
--	    !is_zero_ether_addr(hapd->conf->owe_transition_bssid))
--		return 0;
--
- 	/* Find transition mode SSID/BSSID information from a BSS operated by
- 	 * this hostapd instance. */
- 	if (!hapd->iface->interfaces ||

feeds/mediatek-sdk/hostapd/patches/t00-012-hostapd-Fix-DVLAN-802.1x-issue.patch

@@ -1,53 +0,0 @@
-From 98b6503b87bb36bf2f5ae16e52e230e8870c867f Mon Sep 17 00:00:00 2001
-From: Venkat Chimata <venkata@shasta.cloud>
-Date: Fri, 28 Jun 2024 14:39:31 +0530
-Subject: [PATCH] hostapd: Fix DVLAN + 802.1x issue
-
-In case of swconfig switches, the basename of the interface should be based on the last dot.
-Earlier it was done based on the first dot, which would result in incorrect basename.
-For example if the interface name is eth0.4087 then the vlan->ifname would be eth0.4087.  (A dot at the end) .
-Before this patch, the basename was returned as eth0. It should be eth0.4087
-
-Also fixed the return code by adding a default value of 0 and removed an unncessary check
-for if_add before ubus add call.
-
-Signed-off-by: Venkat Chimata <venkata@shasta.cloud>
----
- src/ap/vlan_init.c | 7 ++++---
- 1 file changed, 4 insertions(+), 3 deletions(-)
-
-diff --git a/src/ap/vlan_init.c b/src/ap/vlan_init.c
-index 3e27671..cfeb1e5 100644
---- a/src/ap/vlan_init.c
-+++ b/src/ap/vlan_init.c
-@@ -23,7 +23,8 @@ static int vlan_if_add(struct hostapd_data *hapd, struct hostapd_vlan *vlan,
- 		       int existsok)
- {
- 	bool vlan_exists = iface_exists(vlan->ifname);
--	int ret;
-+	int ret = 0;
-+
- #ifdef CONFIG_WEP
- 	int i;
- 
-@@ -38,7 +39,7 @@ static int vlan_if_add(struct hostapd_data *hapd, struct hostapd_vlan *vlan,
- #endif /* CONFIG_WEP */
- 
- 	if (!hapd->driver || !hapd->driver->if_add) {
--		char *dot = strstr(vlan->ifname, ".");
-+		char *dot = strrchr(vlan->ifname, '.');
- 		if (dot)
- 			*dot = '\0';
- 		ret = 0;
-@@ -59,7 +60,7 @@ static int vlan_if_add(struct hostapd_data *hapd, struct hostapd_vlan *vlan,
- 	if (hapd->wpa_auth)
- 		ret = wpa_auth_ensure_group(hapd->wpa_auth, vlan->vlan_id);
- 
--	if (!ret && !vlan_exists && hapd->driver->if_add)
-+	if (!ret && !vlan_exists)
- 		hostapd_ubus_add_vlan(hapd, vlan);
- 
- 	if (ret == 0)
--- 
-2.34.1
-

feeds/mediatek-sdk/hostapd/patches/zzz-radius-extended-avp.patch

@@ -1,11 +0,0 @@
---- a/src/radius/radius.c
-+++ b/src/radius/radius.c
-@@ -755,7 +755,7 @@ struct radius_attr_hdr * radius_msg_add_
- 			ext->length = sizeof(*ext) + 1 + alen;
- 			ext->ext_type = ext_type;
- 			wpabuf_put_u8(msg->buf, data_len > alen ? 0x80 : 0);
--			wpabuf_put_data(msg->buf, data, data_len);
-+			wpabuf_put_data(msg->buf, data, alen);
- 			data += alen;
- 			data_len -= alen;
- 			if (radius_msg_add_attr_to_array(

feeds/mediatek-sdk/hostapd/patches/zzz-roaming-key.patch

@@ -1,69 +0,0 @@
---- a/hostapd/config_file.c
-+++ b/hostapd/config_file.c
-@@ -3154,6 +3154,8 @@ static int hostapd_config_fill(struct ho
- 		bss->ft_psk_generate_local = atoi(pos);
- 	} else if (os_strcmp(buf, "ft_l2_refresh") == 0) {
- 		bss->ft_l2_refresh = atoi(pos);
-+	} else if (os_strcmp(buf, "ft_key") == 0) {
-+		strncpy(bss->ft_key, pos, sizeof(bss->ft_key));
- #endif /* CONFIG_IEEE80211R_AP */
- #ifndef CONFIG_NO_CTRL_IFACE
- 	} else if (os_strcmp(buf, "ctrl_interface") == 0) {
-@@ -4996,8 +4998,22 @@ struct hostapd_config * hostapd_config_r
- 
- 	fclose(f);
- 
--	for (i = 0; i < conf->num_bss; i++)
-+	for (i = 0; i < conf->num_bss; i++) {
-+		if (*conf->bss[i]->ft_key) {
-+			u8 buffer[128];
-+			sprintf(buffer, "%02X:%02X:%02X:%02X:%02X:%02X %02X%02X%02X%02X%02X%02X %s", MAC2STR(conf->bss[i]->bssid), MAC2STR(conf->bss[i]->bssid), conf->bss[i]->ft_key);
-+			add_r0kh(conf->bss[i], buffer);
-+			sprintf(buffer, "%02X:%02X:%02X:%02X:%02X:%02X %02X:%02X:%02X:%02X:%02X:%02X %s", MAC2STR(conf->bss[i]->bssid), MAC2STR(conf->bss[i]->bssid), conf->bss[i]->ft_key);
-+			add_r1kh(conf->bss[i], buffer);
-+			sprintf(buffer, "ff:ff:ff:ff:ff:ff * %s", conf->bss[i]->ft_key);
-+			add_r0kh(conf->bss[i], buffer);
-+			sprintf(buffer, "00:00:00:00:00:00 00:00:00:00:00:00 %s", conf->bss[i]->ft_key);
-+			add_r1kh(conf->bss[i], buffer);
-+			hexstr2bin(conf->bss[i]->bssid, conf->bss[i]->r1_key_holder, FT_R1KH_ID_LEN); 
-+			conf->bss[i]->r0_key_holder_bssid = 1;
-+		}
- 		hostapd_set_security_params(conf->bss[i], 1);
-+	}
- 
- 	if (hostapd_config_check(conf, 1))
- 		errors++;
---- a/src/ap/ap_config.h
-+++ b/src/ap/ap_config.h
-@@ -403,6 +403,7 @@ struct hostapd_bss_config {
- 	int ft_psk_generate_local;
- 	int ft_l2_refresh;
- 	int r1_max_key_lifetime;
-+	u8 ft_key[65];
- #endif /* CONFIG_IEEE80211R_AP */
- 
- 	char *ctrl_interface; /* directory for UNIX domain sockets */
---- a/src/ap/ap_config.h
-+++ b/src/ap/ap_config.h
-@@ -390,6 +390,7 @@ struct hostapd_bss_config {
- 	/* IEEE 802.11r - Fast BSS Transition */
- 	u8 mobility_domain[MOBILITY_DOMAIN_ID_LEN];
- 	u8 r1_key_holder[FT_R1KH_ID_LEN];
-+	int r0_key_holder_bssid;
- 	u32 r0_key_lifetime; /* PMK-R0 lifetime seconds */
- 	int rkh_pos_timeout;
- 	int rkh_neg_timeout;
---- a/src/ap/wpa_auth_glue.c
-+++ b/src/ap/wpa_auth_glue.c
-@@ -80,7 +80,10 @@ static void hostapd_wpa_auth_conf(struct
- 	os_memcpy(wconf->ssid, conf->ssid.ssid, wconf->ssid_len);
- 	os_memcpy(wconf->mobility_domain, conf->mobility_domain,
- 		  MOBILITY_DOMAIN_ID_LEN);
--	if (conf->nas_identifier &&
-+	if (1 || conf->r0_key_holder_bssid) {
-+		sprintf(wconf->r0_key_holder, "%02X%02X%02X%02X%02X%02X", MAC2STR(conf->bssid));
-+		wconf->r0_key_holder_len = 12;
-+	} else if (conf->nas_identifier &&
- 	    os_strlen(conf->nas_identifier) <= FT_R0KH_ID_MAX_LEN) {
- 		wconf->r0_key_holder_len = os_strlen(conf->nas_identifier);
- 		os_memcpy(wconf->r0_key_holder, conf->nas_identifier,

feeds/mediatek-sdk/hostapd/src/hostapd/radius.c

@@ -431,10 +431,6 @@ radius_user_parse_methods(struct eap_user *eap, struct blob_attr *data)
 				eap->ttls_auth |= EAP_TTLS_AUTH_MSCHAPV2;
 				continue;
 			}
-			if (!strcmp(method, "MACACL")) {
-				eap->macacl = 1;
-				continue;
-			}
 		}
 		n++;
 	}

feeds/mediatek-sdk/hostapd/src/src/ap/ubus.c

@@ -276,10 +276,24 @@ hostapd_bss_get_clients(struct ubus_context *ctx, struct ubus_object *obj,
 			blobmsg_add_u8(&b, sta_flags[i].name,
 				       !!(sta->flags & sta_flags[i].flag));
 
+#ifdef CONFIG_MBO
+		blobmsg_add_u8(&b, "mbo", !!(sta->cell_capa));
+#endif
+
 		r = blobmsg_open_array(&b, "rrm");
 		for (i = 0; i < ARRAY_SIZE(sta->rrm_enabled_capa); i++)
 			blobmsg_add_u32(&b, "", sta->rrm_enabled_capa[i]);
 		blobmsg_close_array(&b, r);
+
+		r = blobmsg_open_array(&b, "extended_capabilities");
+		/* Check if client advertises extended capabilities */
+		if (sta->ext_capability && sta->ext_capability[0] > 0) {
+			for (i = 0; i < sta->ext_capability[0]; i++) {
+				blobmsg_add_u32(&b, "", sta->ext_capability[1 + i]);
+			}
+		}
+		blobmsg_close_array(&b, r);
+
 		blobmsg_add_u32(&b, "aid", sta->aid);
 #ifdef CONFIG_TAXONOMY
 		r = blobmsg_alloc_string_buffer(&b, "signature", 1024);
@@ -309,7 +323,7 @@ hostapd_bss_get_clients(struct ubus_context *ctx, struct ubus_object *obj,
 			blobmsg_add_u32(&b, "retries", sta_driver_data.tx_retry_count);
 			blobmsg_add_u32(&b, "failed", sta_driver_data.tx_retry_failed);
 			blobmsg_add_u32(&b, "signal", sta_driver_data.signal);
-		
+
 			r = blobmsg_open_table(&b, "mcs");
 			if (sta_driver_data.rx_hemcs) {
 				blobmsg_add_u32(&b, "he", 1);
@@ -339,7 +353,7 @@ hostapd_bss_get_clients(struct ubus_context *ctx, struct ubus_object *obj,
 				blobmsg_add_u32(&b, "tx", sta_driver_data.tx_mcs);
 			}
 			blobmsg_close_table(&b, r);
-		
+
 			if (sta->signal_mgmt)
 				blobmsg_add_u32(&b, "signal_mgmt", sta->signal_mgmt);
 		}
@@ -369,32 +383,6 @@ hostapd_bss_get_features(struct ubus_context *ctx, struct ubus_object *obj,
 	return 0;
 }
 
-/* Imported from iw/util.c
- *  https://git.kernel.org/pub/scm/linux/kernel/git/jberg/iw.git/tree/util.c?id=4b25ae3537af48dbf9d0abf94132e5ba01b32c18#n200
- */
-int ieee80211_frequency_to_channel(int freq)
-{
-	/* see 802.11-2007 17.3.8.3.2 and Annex J */
-	if (freq == 2484)
-		return 14;
-	/* see 802.11ax D6.1 27.3.23.2 and Annex E */
-	else if (freq == 5935)
-		return 2;
-	else if (freq < 2484)
-		return (freq - 2407) / 5;
-	else if (freq >= 4910 && freq <= 4980)
-		return (freq - 4000) / 5;
-	else if (freq < 5950)
-		return (freq - 5000) / 5;
-	else if (freq <= 45000) /* DMG band lower limit */
-		/* see 802.11ax D6.1 27.3.23.2 */
-		return (freq - 5950) / 5;
-	else if (freq >= 58320 && freq <= 70200)
-		return (freq - 56160) / 2160;
-	else
-		return 0;
-}
-
 static int
 hostapd_bss_get_status(struct ubus_context *ctx, struct ubus_object *obj,
 		       struct ubus_request_data *req, const char *method,
@@ -429,6 +417,12 @@ hostapd_bss_get_status(struct ubus_context *ctx, struct ubus_object *obj,
 	blobmsg_add_u32(&b, "channel", channel);
 	blobmsg_add_u32(&b, "op_class", op_class);
 	blobmsg_add_u32(&b, "beacon_interval", hapd->iconf->beacon_int);
+#ifdef CONFIG_IEEE80211AX
+	blobmsg_add_u32(&b, "bss_color", hapd->iface->conf->he_op.he_bss_color_disabled ? -1 :
+					 hapd->iface->conf->he_op.he_bss_color);
+#else
+	blobmsg_add_u32(&b, "bss_color", -1);
+#endif
 
 	snprintf(phy_name, 17, "%s", hapd->iface->phy);
 	blobmsg_add_string(&b, "phy", phy_name);
@@ -529,7 +523,6 @@ hostapd_bss_del_client_cb(struct hostapd_iface *iface, void *ctx)
 
 	hwaddr_aton(blobmsg_data(tb[DEL_CLIENT_ADDR]), addr);
 
-	syslog(0, "blogic %s:%s[%d]\n", __FILE__, __func__, __LINE__);
 	for (i = 0; i < iface->num_bss; i++) {
 		struct hostapd_data *bss = iface->bss[i];
 
@@ -547,7 +540,7 @@ hostapd_bss_del_client(struct ubus_context *ctx, struct ubus_object *obj,
 	struct hostapd_data *hapd = container_of(obj, struct hostapd_data, ubus.obj);
 	struct sta_info *sta;
 	bool deauth = false, global = false;
-	int reason, ban_time = 0;;
+	int reason, ban_time = 0;
 	u8 addr[ETH_ALEN];
 
 	blobmsg_parse(del_policy, __DEL_CLIENT_MAX, tb, blob_data(msg), blob_len(msg));
@@ -567,6 +560,9 @@ hostapd_bss_del_client(struct ubus_context *ctx, struct ubus_object *obj,
 	if (tb[DEL_CLIENT_GLOBAL_BAN])
 		global = blobmsg_get_bool(tb[DEL_CLIENT_GLOBAL_BAN]);
 
+	if (tb[DEL_CLIENT_GLOBAL_BAN])
+		global = blobmsg_get_bool(tb[DEL_CLIENT_GLOBAL_BAN]);
+
 	sta = ap_get_sta(hapd, addr);
 	if (sta) {
 		if (deauth) {
@@ -579,7 +575,7 @@ hostapd_bss_del_client(struct ubus_context *ctx, struct ubus_object *obj,
 	}
 
 	if (tb[DEL_CLIENT_BAN_TIME]) {
-		ban_time = blobmsg_get_u32(tb[DEL_CLIENT_BAN_TIME]); 
+		ban_time = blobmsg_get_u32(tb[DEL_CLIENT_BAN_TIME]);
 		if (global)
 			hapd->iface->interfaces->for_each_interface(hapd->iface->interfaces, hostapd_bss_del_client_cb, tb);
 		else
@@ -848,8 +844,11 @@ hostapd_switch_chan(struct ubus_context *ctx, struct ubus_object *obj,
 				css.freq_params.sec_channel_offset,
 				chwidth, seg0, seg1,
 				iconf->vht_capab,
-				mode ? &mode->he_capab[IEEE80211_MODE_AP] : NULL,
-                               mode ? &mode->eht_capab[IEEE80211_MODE_AP] : NULL);
+				mode ? &mode->he_capab[IEEE80211_MODE_AP] :
+				NULL,
+				mode ? &mode->eht_capab[IEEE80211_MODE_AP] :
+				NULL);
+
 	for (i = 0; i < hapd->iface->num_bss; i++) {
 		struct hostapd_data *bss = hapd->iface->bss[i];
 
@@ -951,6 +950,7 @@ hostapd_rrm_print_nr(struct hostapd_neighbor_entry *nr)
 enum {
 	BSS_MGMT_EN_NEIGHBOR,
 	BSS_MGMT_EN_BEACON,
+	BSS_MGMT_EN_LINK_MEASUREMENT,
 #ifdef CONFIG_WNM_AP
 	BSS_MGMT_EN_BSS_TRANSITION,
 #endif
@@ -978,6 +978,14 @@ __hostapd_bss_mgmt_enable_f(struct hostapd_data *hapd, int flag)
 			WLAN_RRM_CAPS_BEACON_REPORT_ACTIVE |
 			WLAN_RRM_CAPS_BEACON_REPORT_TABLE;
 
+		if (bss->radio_measurements[0] & flags == flags)
+			return false;
+
+		bss->radio_measurements[0] |= (u8) flags;
+		return true;
+	case BSS_MGMT_EN_LINK_MEASUREMENT:
+		flags = WLAN_RRM_CAPS_LINK_MEASUREMENT;
+
 		if (bss->radio_measurements[0] & flags == flags)
 			return false;
 
@@ -1015,6 +1023,7 @@ __hostapd_bss_mgmt_enable(struct hostapd_data *hapd, uint32_t flags)
 static const struct blobmsg_policy bss_mgmt_enable_policy[__BSS_MGMT_EN_MAX] = {
 	[BSS_MGMT_EN_NEIGHBOR] = { "neighbor_report", BLOBMSG_TYPE_BOOL },
 	[BSS_MGMT_EN_BEACON] = { "beacon_report", BLOBMSG_TYPE_BOOL },
+	[BSS_MGMT_EN_LINK_MEASUREMENT] = { "link_measurement", BLOBMSG_TYPE_BOOL },
 #ifdef CONFIG_WNM_AP
 	[BSS_MGMT_EN_BSS_TRANSITION] = { "bss_transition", BLOBMSG_TYPE_BOOL },
 #endif
@@ -1043,6 +1052,8 @@ hostapd_bss_mgmt_enable(struct ubus_context *ctx, struct ubus_object *obj,
 	}
 
 	__hostapd_bss_mgmt_enable(hapd, flags);
+
+	return 0;
 }
 
 
@@ -1293,13 +1304,105 @@ hostapd_rrm_beacon_req(struct ubus_context *ctx, struct ubus_object *obj,
 	return 0;
 }
 
+enum {
+	LM_REQ_ADDR,
+	LM_REQ_TX_POWER_USED,
+	LM_REQ_TX_POWER_MAX,
+	__LM_REQ_MAX,
+};
+
+static const struct blobmsg_policy lm_req_policy[__LM_REQ_MAX] = {
+	[LM_REQ_ADDR] = { "addr", BLOBMSG_TYPE_STRING },
+	[LM_REQ_TX_POWER_USED] = { "tx-power-used", BLOBMSG_TYPE_INT32 },
+	[LM_REQ_TX_POWER_MAX] = { "tx-power-max", BLOBMSG_TYPE_INT32 },
+};
+
+static int
+hostapd_rrm_lm_req(struct ubus_context *ctx, struct ubus_object *obj,
+		   struct ubus_request_data *ureq, const char *method,
+		   struct blob_attr *msg)
+{
+	struct hostapd_data *hapd = container_of(obj, struct hostapd_data, ubus.obj);
+	struct blob_attr *tb[__LM_REQ_MAX];
+	struct wpabuf *buf;
+	u8 addr[ETH_ALEN];
+	int ret;
+	int8_t txp_used, txp_max;
+
+	txp_used = 0;
+	txp_max = 0;
+
+	blobmsg_parse(lm_req_policy, __LM_REQ_MAX, tb, blob_data(msg), blob_len(msg));
+
+	if (!tb[LM_REQ_ADDR])
+		return UBUS_STATUS_INVALID_ARGUMENT;
+
+	if (tb[LM_REQ_TX_POWER_USED])
+		txp_used = (int8_t) blobmsg_get_u32(tb[LM_REQ_TX_POWER_USED]);
+
+	if (tb[LM_REQ_TX_POWER_MAX])
+		txp_max = (int8_t) blobmsg_get_u32(tb[LM_REQ_TX_POWER_MAX]);
+
+	if (hwaddr_aton(blobmsg_data(tb[LM_REQ_ADDR]), addr))
+		return UBUS_STATUS_INVALID_ARGUMENT;
+
+	buf = wpabuf_alloc(5);
+	if (!buf)
+		return UBUS_STATUS_UNKNOWN_ERROR;
+
+	wpabuf_put_u8(buf, WLAN_ACTION_RADIO_MEASUREMENT);
+	wpabuf_put_u8(buf, WLAN_RRM_LINK_MEASUREMENT_REQUEST);
+	wpabuf_put_u8(buf, 1);
+	/* TX-Power used */
+	wpabuf_put_u8(buf, txp_used);
+	/* Max TX Power */
+	wpabuf_put_u8(buf, txp_max);
+
+	ret = hostapd_drv_send_action(hapd, hapd->iface->freq, 0, addr,
+				      wpabuf_head(buf), wpabuf_len(buf));
+
+	wpabuf_free(buf);
+	if (ret < 0)
+		return -ret;
+
+	return 0;
+}
+
+
+void hostapd_ubus_handle_link_measurement(struct hostapd_data *hapd, const u8 *data, size_t len)
+{
+	const struct ieee80211_mgmt *mgmt = (const struct ieee80211_mgmt *) data;
+	const u8 *pos, *end;
+	u8 token;
+
+	end = data + len;
+	token = mgmt->u.action.u.rrm.dialog_token;
+	pos = mgmt->u.action.u.rrm.variable;
+
+	if (end - pos < 8)
+		return;
+
+	if (!hapd->ubus.obj.has_subscribers)
+		return;
+
+	blob_buf_init(&b, 0);
+	blobmsg_add_macaddr(&b, "address", mgmt->sa);
+	blobmsg_add_u16(&b, "dialog-token", token);
+	blobmsg_add_u16(&b, "rx-antenna-id", pos[4]);
+	blobmsg_add_u16(&b, "tx-antenna-id", pos[5]);
+	blobmsg_add_u16(&b, "rcpi", pos[6]);
+	blobmsg_add_u16(&b, "rsni", pos[7]);
+
+	ubus_notify(ctx, &hapd->ubus.obj, "link-measurement-report", b.head, -1);
+}
+
 
 #ifdef CONFIG_WNM_AP
 
 static int
 hostapd_bss_tr_send(struct hostapd_data *hapd, u8 *addr, bool disassoc_imminent, bool abridged,
 		    u16 disassoc_timer, u8 validity_period, u8 dialog_token,
-		    struct blob_attr *neighbors)
+		    struct blob_attr *neighbors, u8 mbo_reason, u8 cell_pref, u8 reassoc_delay)
 {
 	struct blob_attr *cur;
 	struct sta_info *sta;
@@ -1307,6 +1410,8 @@ hostapd_bss_tr_send(struct hostapd_data *hapd, u8 *addr, bool disassoc_imminent,
 	int rem;
 	u8 *nr = NULL;
 	u8 req_mode = 0;
+	u8 mbo[10];
+	size_t mbo_len = 0;
 
 	sta = ap_get_sta(hapd, addr);
 	if (!sta)
@@ -1358,8 +1463,37 @@ hostapd_bss_tr_send(struct hostapd_data *hapd, u8 *addr, bool disassoc_imminent,
 	if (disassoc_imminent)
 		req_mode |= WNM_BSS_TM_REQ_DISASSOC_IMMINENT;
 
+#ifdef CONFIG_MBO
+	u8 *mbo_pos = mbo;
+
+	if (mbo_reason > MBO_TRANSITION_REASON_PREMIUM_AP)
+		return UBUS_STATUS_INVALID_ARGUMENT;
+
+	if (cell_pref != 0 && cell_pref != 1 && cell_pref != 255)
+		return UBUS_STATUS_INVALID_ARGUMENT;
+
+	if (reassoc_delay > 65535 || (reassoc_delay && !disassoc_imminent))
+		return UBUS_STATUS_INVALID_ARGUMENT;
+
+	*mbo_pos++ = MBO_ATTR_ID_TRANSITION_REASON;
+	*mbo_pos++ = 1;
+	*mbo_pos++ = mbo_reason;
+	*mbo_pos++ = MBO_ATTR_ID_CELL_DATA_PREF;
+	*mbo_pos++ = 1;
+	*mbo_pos++ = cell_pref;
+
+	if (reassoc_delay) {
+		*mbo_pos++ = MBO_ATTR_ID_ASSOC_RETRY_DELAY;
+		*mbo_pos++ = 2;
+		WPA_PUT_LE16(mbo_pos, reassoc_delay);
+		mbo_pos += 2;
+	}
+
+	mbo_len = mbo_pos - mbo;
+#endif
+
 	if (wnm_send_bss_tm_req(hapd, sta, req_mode, disassoc_timer, validity_period, NULL,
-				dialog_token, NULL, nr, nr_len, NULL, 0))
+				dialog_token, NULL, nr, nr_len, mbo_len ? mbo : NULL, mbo_len))
 		return UBUS_STATUS_UNKNOWN_ERROR;
 
 	return 0;
@@ -1373,6 +1507,11 @@ enum {
 	BSS_TR_NEIGHBORS,
 	BSS_TR_ABRIDGED,
 	BSS_TR_DIALOG_TOKEN,
+#ifdef CONFIG_MBO
+	BSS_TR_MBO_REASON,
+	BSS_TR_CELL_PREF,
+	BSS_TR_REASSOC_DELAY,
+#endif
 	__BSS_TR_DISASSOC_MAX
 };
 
@@ -1384,6 +1523,11 @@ static const struct blobmsg_policy bss_tr_policy[__BSS_TR_DISASSOC_MAX] = {
 	[BSS_TR_NEIGHBORS] = { "neighbors", BLOBMSG_TYPE_ARRAY },
 	[BSS_TR_ABRIDGED] = { "abridged", BLOBMSG_TYPE_BOOL },
 	[BSS_TR_DIALOG_TOKEN] = { "dialog_token", BLOBMSG_TYPE_INT32 },
+#ifdef CONFIG_MBO
+	[BSS_TR_MBO_REASON] = { "mbo_reason", BLOBMSG_TYPE_INT32 },
+	[BSS_TR_CELL_PREF] = { "cell_pref", BLOBMSG_TYPE_INT32 },
+	[BSS_TR_REASSOC_DELAY] = { "reassoc_delay", BLOBMSG_TYPE_INT32 },
+#endif
 };
 
 static int
@@ -1400,6 +1544,9 @@ hostapd_bss_transition_request(struct ubus_context *ctx, struct ubus_object *obj
 	u32 dialog_token = 1;
 	bool abridged;
 	bool da_imminent;
+	u8 mbo_reason;
+	u8 cell_pref;
+	u8 reassoc_delay;
 
 	blobmsg_parse(bss_tr_policy, __BSS_TR_DISASSOC_MAX, tb, blob_data(msg), blob_len(msg));
 
@@ -1421,52 +1568,19 @@ hostapd_bss_transition_request(struct ubus_context *ctx, struct ubus_object *obj
 	da_imminent = !!(tb[BSS_TR_DA_IMMINENT] && blobmsg_get_bool(tb[BSS_TR_DA_IMMINENT]));
 	abridged = !!(tb[BSS_TR_ABRIDGED] && blobmsg_get_bool(tb[BSS_TR_ABRIDGED]));
 
+#ifdef CONFIG_MBO
+	if (tb[BSS_TR_MBO_REASON])
+		mbo_reason = blobmsg_get_u32(tb[BSS_TR_MBO_REASON]);
+
+	if (tb[BSS_TR_CELL_PREF])
+		cell_pref = blobmsg_get_u32(tb[BSS_TR_CELL_PREF]);
+
+	if (tb[BSS_TR_REASSOC_DELAY])
+		reassoc_delay = blobmsg_get_u32(tb[BSS_TR_REASSOC_DELAY]);
+#endif
+
 	return hostapd_bss_tr_send(hapd, addr, da_imminent, abridged, da_timer, valid_period,
-				   dialog_token, tb[BSS_TR_NEIGHBORS]);
-}
-
-enum {
-	WNM_DISASSOC_ADDR,
-	WNM_DISASSOC_DURATION,
-	WNM_DISASSOC_NEIGHBORS,
-	WNM_DISASSOC_ABRIDGED,
-	__WNM_DISASSOC_MAX,
-};
-
-static const struct blobmsg_policy wnm_disassoc_policy[__WNM_DISASSOC_MAX] = {
-	[WNM_DISASSOC_ADDR] = { "addr", BLOBMSG_TYPE_STRING },
-	[WNM_DISASSOC_DURATION] { "duration", BLOBMSG_TYPE_INT32 },
-	[WNM_DISASSOC_NEIGHBORS] { "neighbors", BLOBMSG_TYPE_ARRAY },
-	[WNM_DISASSOC_ABRIDGED] { "abridged", BLOBMSG_TYPE_BOOL },
-};
-
-static int
-hostapd_wnm_disassoc_imminent(struct ubus_context *ctx, struct ubus_object *obj,
-			      struct ubus_request_data *ureq, const char *method,
-			      struct blob_attr *msg)
-{
-	struct hostapd_data *hapd = container_of(obj, struct hostapd_data, ubus.obj);
-	struct blob_attr *tb[__WNM_DISASSOC_MAX];
-	struct sta_info *sta;
-	int duration = 10;
-	u8 addr[ETH_ALEN];
-	bool abridged;
-
-	blobmsg_parse(wnm_disassoc_policy, __WNM_DISASSOC_MAX, tb, blob_data(msg), blob_len(msg));
-
-	if (!tb[WNM_DISASSOC_ADDR])
-		return UBUS_STATUS_INVALID_ARGUMENT;
-
-	if (hwaddr_aton(blobmsg_data(tb[WNM_DISASSOC_ADDR]), addr))
-		return UBUS_STATUS_INVALID_ARGUMENT;
-
-	if (tb[WNM_DISASSOC_DURATION])
-		duration = blobmsg_get_u32(tb[WNM_DISASSOC_DURATION]);
-
-	abridged = !!(tb[WNM_DISASSOC_ABRIDGED] && blobmsg_get_bool(tb[WNM_DISASSOC_ABRIDGED]));
-
-	return hostapd_bss_tr_send(hapd, addr, true, abridged, duration, duration,
-				   1, tb[WNM_DISASSOC_NEIGHBORS]);
+				   dialog_token, tb[BSS_TR_NEIGHBORS], mbo_reason, cell_pref, reassoc_delay);
 }
 #endif
 
@@ -1601,8 +1715,8 @@ static const struct ubus_method bss_methods[] = {
 	UBUS_METHOD_NOARG("rrm_nr_list", hostapd_rrm_nr_list),
 	UBUS_METHOD("rrm_nr_set", hostapd_rrm_nr_set, nr_set_policy),
 	UBUS_METHOD("rrm_beacon_req", hostapd_rrm_beacon_req, beacon_req_policy),
+	UBUS_METHOD("link_measurement_req", hostapd_rrm_lm_req, lm_req_policy),
 #ifdef CONFIG_WNM_AP
-	UBUS_METHOD("wnm_disassoc_imminent", hostapd_wnm_disassoc_imminent, wnm_disassoc_policy),
 	UBUS_METHOD("bss_transition_request", hostapd_bss_transition_request, bss_tr_policy),
 #endif
 };
@@ -1644,7 +1758,7 @@ hostapd_wired_get_clients(struct ubus_context *ctx, struct ubus_object *obj,
 			blobmsg_add_u8(&b, sta_flags[i].name,
 				       !!(sta->flags & sta_flags[i].flag));
 
-		blobmsg_close_table(&b, c);
+			blobmsg_close_table(&b, c);
 	}
 	blobmsg_close_array(&b, list);
 	ubus_send_reply(ctx, req, b.head);
@@ -1700,21 +1814,21 @@ hostapd_wired_mac_auth(struct ubus_context *ctx, struct ubus_object *obj,
 {
 	struct hostapd_data *hapd = container_of(obj, struct hostapd_data, ubus.obj);
 	struct blob_attr *tb[__MAC_AUTH_MAX];
-        struct radius_sta rad_info;
+	struct radius_sta rad_info;
 	struct sta_info *sta;
 	u8 addr[ETH_ALEN];
 	int acl_res;
-	
+
 	blobmsg_parse(mac_auth_policy, __MAC_AUTH_MAX, tb, blob_data(msg), blob_len(msg));
 
 	if (hwaddr_aton(blobmsg_data(tb[MAC_AUTH_ADDR]), addr))
 		return UBUS_STATUS_INVALID_ARGUMENT;
 
-        acl_res = hostapd_allowed_address(hapd, addr, NULL, 0, &rad_info, 0);
-        if (acl_res == HOSTAPD_ACL_REJECT) {
-                wpa_printf(MSG_ERROR, "Ignore new peer notification\n");
-                return UBUS_STATUS_INVALID_ARGUMENT;
-        }
+	acl_res = hostapd_allowed_address(hapd, addr, NULL, 0, &rad_info, 0);
+	if (acl_res == HOSTAPD_ACL_REJECT) {
+		wpa_printf(MSG_ERROR, "Ignore new peer notification\n");
+		return UBUS_STATUS_INVALID_ARGUMENT;
+	}
 
 	return 0;
 }
@@ -1830,8 +1944,7 @@ ubus_event_cb(struct ubus_notify_request *req, int idx, int ret)
 {
 	struct ubus_event_req *ureq = container_of(req, struct ubus_event_req, nreq);
 
-	if (!ureq->resp)
-		ureq->resp = ret;
+	ureq->resp = ret;
 }
 
 int hostapd_ubus_handle_event(struct hostapd_data *hapd, struct hostapd_ubus_request *req)
@@ -1864,7 +1977,6 @@ int hostapd_ubus_handle_event(struct hostapd_data *hapd, struct hostapd_ubus_req
 
 	blob_buf_init(&b, 0);
 	blobmsg_add_macaddr(&b, "address", addr);
-	blobmsg_add_string(&b, "ifname", hapd->conf->iface);
 	if (req->mgmt_frame)
 		blobmsg_add_macaddr(&b, "target", req->mgmt_frame->da);
 	if (req->ssi_signal)
@@ -1957,8 +2069,8 @@ void hostapd_ubus_notify_csa(struct hostapd_data *hapd, int freq)
 	ubus_notify(ctx, &hapd->ubus.obj, "channel-switch", b.head, -1);
 }
 
-
-void hostapd_ubus_notify_authorized(struct hostapd_data *hapd, struct sta_info *sta)
+void hostapd_ubus_notify_authorized(struct hostapd_data *hapd, struct sta_info *sta,
+				    const char *auth_alg)
 {
 	if (!hapd->ubus.obj.has_subscribers)
 		return;
@@ -1966,8 +2078,10 @@ void hostapd_ubus_notify_authorized(struct hostapd_data *hapd, struct sta_info *
 	blob_buf_init(&b, 0);
 	blobmsg_add_macaddr(&b, "address", sta->addr);
 	if (sta->vlan_id)
-		blobmsg_add_u32(&b, "vlan", sta->vlan_id);
+		blobmsg_add_u32(&b, "vlan", sta->vlan_id);	
 	blobmsg_add_string(&b, "ifname", hapd->conf->iface);
+	if (auth_alg)
+		blobmsg_add_string(&b, "auth-alg", auth_alg);
 	if (sta->bandwidth[0] || sta->bandwidth[1]) {
 		void *r = blobmsg_open_array(&b, "rate-limit");
 
@@ -1975,7 +2089,6 @@ void hostapd_ubus_notify_authorized(struct hostapd_data *hapd, struct sta_info *
 		blobmsg_add_u32(&b, "", sta->bandwidth[1]);
 		blobmsg_close_array(&b, r);
 	}
-
 	ubus_notify(ctx, &hapd->ubus.obj, "sta-authorized", b.head, -1);
 }
 
@@ -2001,6 +2114,7 @@ void hostapd_ubus_notify_beacon_report(
 	blobmsg_add_macaddr(&b, "bssid", rep->bssid);
 	blobmsg_add_u16(&b, "antenna-id", rep->antenna_id);
 	blobmsg_add_u16(&b, "parent-tsf", rep->parent_tsf);
+	blobmsg_add_u16(&b, "rep-mode", rep_mode);
 
 	ubus_notify(ctx, &hapd->ubus.obj, "beacon-report", b.head, -1);
 }

feeds/mediatek-sdk/hostapd/src/src/ap/ubus.h

@@ -48,8 +48,8 @@ void hostapd_ubus_add_vlan(struct hostapd_data *hapd, struct hostapd_vlan *vlan)
 void hostapd_ubus_remove_vlan(struct hostapd_data *hapd, struct hostapd_vlan *vlan);
 
 int hostapd_ubus_handle_event(struct hostapd_data *hapd, struct hostapd_ubus_request *req);
+void hostapd_ubus_handle_link_measurement(struct hostapd_data *hapd, const u8 *data, size_t len);
 void hostapd_ubus_notify(struct hostapd_data *hapd, const char *type, const u8 *mac);
-void hostapd_ubus_notify_authorized(struct hostapd_data *hapd, struct sta_info *sta);
 void hostapd_ubus_notify_beacon_report(struct hostapd_data *hapd,
 				       const u8 *addr, u8 token, u8 rep_mode,
 				       struct rrm_measurement_beacon_report *rep,
@@ -66,7 +66,8 @@ void hostapd_ubus_free(struct hapd_interfaces *interfaces);
 int hostapd_ubus_notify_bss_transition_query(
 	struct hostapd_data *hapd, const u8 *addr, u8 dialog_token, u8 reason,
 	const u8 *candidate_list, u16 candidate_list_len);
-void hostapd_ubus_notify_csa(struct hostapd_data *hapd, int freq);
+void hostapd_ubus_notify_authorized(struct hostapd_data *hapd, struct sta_info *sta,
+				    const char *auth_alg);
 
 #else
 
@@ -101,6 +102,10 @@ static inline int hostapd_ubus_handle_event(struct hostapd_data *hapd, struct ho
 	return 0;
 }
 
+static inline void hostapd_ubus_handle_link_measurement(struct hostapd_data *hapd, const u8 *data, size_t len)
+{
+}
+
 static inline void hostapd_ubus_notify(struct hostapd_data *hapd, const char *type, const u8 *mac)
 {
 }
@@ -138,6 +143,13 @@ static inline int hostapd_ubus_notify_bss_transition_query(
 {
 	return 0;
 }
+
+static inline void
+hostapd_ubus_notify_authorized(struct hostapd_data *hapd, struct sta_info *sta,
+			       const char *auth_alg)
+{
+}
+
 #endif
 
 #endif

feeds/mediatek-sdk/hostapd/src/src/ap/ucode.c

@@ -9,7 +9,6 @@
 #include "ap_drv_ops.h"
 #include "dfs.h"
 #include "acs.h"
-#include "ieee802_11_auth.h"
 #include <libubox/uloop.h>
 
 static uc_resource_type_t *global_type, *bss_type, *iface_type;
@@ -52,7 +51,7 @@ hostapd_ucode_update_bss_list(struct hostapd_iface *iface, uc_value_t *if_bss, u
 	int i;
 
 	list = ucv_array_new(vm);
-	for (i = 0; iface->bss && i < iface->num_bss; i++) {
+	for (i = 0; i < iface->num_bss; i++) {
 		struct hostapd_data *hapd = iface->bss[i];
 		uc_value_t *val = hostapd_ucode_bss_get_uval(hapd);
 
@@ -256,7 +255,6 @@ uc_hostapd_bss_set_config(uc_vm_t *vm, size_t nargs)
 
 	hostapd_setup_bss(hapd, hapd == iface->bss[0], true);
 	hostapd_ucode_update_interfaces();
-	hostapd_owe_update_trans(iface);
 
 done:
 	ret = 0;
@@ -377,7 +375,6 @@ uc_hostapd_iface_add_bss(uc_vm_t *vm, size_t nargs)
 	conf->bss[idx] = NULL;
 	ret = hostapd_ucode_bss_get_uval(hapd);
 	hostapd_ucode_update_interfaces();
-	hostapd_owe_update_trans(iface);
 	goto out;
 
 deinit_ctrl:
@@ -606,7 +603,6 @@ out:
 
 		ieee802_11_set_beacon(hapd);
 	}
-	hostapd_owe_update_trans(iface);
 
 	return ucv_boolean_new(true);
 }
@@ -698,7 +694,6 @@ uc_hostapd_bss_rename(uc_vm_t *vm, size_t nargs)
 	hostapd_ubus_add_bss(hapd);
 
 	hostapd_ucode_update_interfaces();
-	hostapd_owe_update_trans(hapd->iface);
 out:
 	if (interfaces->ctrl_iface_init)
 		interfaces->ctrl_iface_init(hapd);
@@ -706,113 +701,6 @@ out:
 	return ret ? NULL : ucv_boolean_new(true);
 }
 
-int hostapd_ucode_sta_auth(struct hostapd_data *hapd, struct sta_info *sta)
-{
-	char addr[sizeof(MACSTR)];
-	uc_value_t *val, *cur;
-	int ret = 0;
-
-	if (wpa_ucode_call_prepare("sta_auth"))
-		return 0;
-
-	uc_value_push(ucv_get(ucv_string_new(hapd->conf->iface)));
-
-	snprintf(addr, sizeof(addr), MACSTR, MAC2STR(sta->addr));
-	val = ucv_string_new(addr);
-	uc_value_push(ucv_get(val));
-
-	val = wpa_ucode_call(2);
-
-	cur = ucv_object_get(val, "psk", NULL);
-	if (ucv_type(cur) == UC_ARRAY) {
-		struct hostapd_sta_wpa_psk_short *p, **next;
-		size_t len = ucv_array_length(cur);
-
-		next = &sta->psk;
-		hostapd_free_psk_list(*next);
-		*next = NULL;
-
-		for (size_t i = 0; i < len; i++) {
-			uc_value_t *cur_psk;
-			const char *str;
-			size_t str_len;
-
-			cur_psk = ucv_array_get(cur, i);
-			str = ucv_string_get(cur_psk);
-			str_len = strlen(str);
-			if (!str || str_len < 8 || str_len > 64)
-				continue;
-
-			p = os_zalloc(sizeof(*p));
-			if (len == 64) {
-				if (hexstr2bin(str, p->psk, PMK_LEN) < 0) {
-					free(p);
-					continue;
-				}
-			} else {
-				p->is_passphrase = 1;
-				memcpy(p->passphrase, str, str_len + 1);
-			}
-
-			*next = p;
-			next = &p->next;
-		}
-	}
-
-	cur = ucv_object_get(val, "force_psk", NULL);
-	sta->use_sta_psk = ucv_is_truish(cur);
-
-	cur = ucv_object_get(val, "status", NULL);
-	if (ucv_type(cur) == UC_INTEGER)
-		ret = ucv_int64_get(cur);
-
-	ucv_put(val);
-	ucv_gc(vm);
-
-	return ret;
-}
-
-void hostapd_ucode_sta_connected(struct hostapd_data *hapd, struct sta_info *sta)
-{
-	struct hostapd_sta_wpa_psk_short *psk = sta->psk;
-	char addr[sizeof(MACSTR)];
-	uc_value_t *val, *cur;
-	int ret = 0;
-
-	if (wpa_ucode_call_prepare("sta_connected"))
-		return;
-
-	uc_value_push(ucv_get(ucv_string_new(hapd->conf->iface)));
-
-	snprintf(addr, sizeof(addr), MACSTR, MAC2STR(sta->addr));
-	val = ucv_string_new(addr);
-	uc_value_push(ucv_get(val));
-
-	val = ucv_object_new(vm);
-	if (sta->psk_idx)
-		ucv_object_add(val, "psk_idx", ucv_int64_new(sta->psk_idx - 1));
-	if (sta->psk)
-		ucv_object_add(val, "psk", ucv_string_new(sta->psk->passphrase));
-	uc_value_push(ucv_get(val));
-
-	val = wpa_ucode_call(3);
-	if (ucv_type(val) != UC_OBJECT)
-		goto out;
-
-	cur = ucv_object_get(val, "vlan", NULL);
-	if (ucv_type(cur) == UC_INTEGER) {
-		struct vlan_description vdesc = {
-			.notempty = 1,
-			.untagged = ucv_int64_get(cur),
-		};
-
-		ap_sta_set_vlan(hapd, sta, &vdesc);
-		ap_sta_bind_vlan(hapd, sta);
-	}
-
-out:
-	ucv_put(val);
-}
 
 int hostapd_ucode_init(struct hapd_interfaces *ifaces)
 {
@@ -877,34 +765,6 @@ void hostapd_ucode_free_iface(struct hostapd_iface *iface)
 	wpa_ucode_registry_remove(iface_registry, iface->ucode.idx);
 }
 
-int hostapd_ucode_afc_request(struct hostapd_iface *iface, const char *request,
-			      char *buf, size_t len)
-{
-	uc_value_t *val;
-	size_t ret_len;
-	int ret = -1;
-
-	if (wpa_ucode_call_prepare("afc_request"))
-		return -1;
-
-	uc_value_push(ucv_get(ucv_string_new(iface->phy)));
-	uc_value_push(ucv_get(ucv_string_new(request)));
-	val = wpa_ucode_call(2);
-	if (ucv_type(val) != UC_STRING)
-		goto out;
-
-	ret_len = ucv_string_length(val);
-	if (ret_len >= len)
-		goto out;
-
-	memcpy(buf, ucv_string_get(val), ret_len + 1);
-	ret = (int)ret_len;
-
-out:
-	ucv_put(val);
-	return ret;
-}
-
 void hostapd_ucode_add_bss(struct hostapd_data *hapd)
 {
 	uc_value_t *val;

feeds/mediatek-sdk/hostapd/src/src/ap/ucode.h

@@ -23,13 +23,9 @@ int hostapd_ucode_init(struct hapd_interfaces *ifaces);
 
 void hostapd_ucode_free(void);
 void hostapd_ucode_free_iface(struct hostapd_iface *iface);
-int hostapd_ucode_sta_auth(struct hostapd_data *hapd, struct sta_info *sta);
-void hostapd_ucode_sta_connected(struct hostapd_data *hapd, struct sta_info *sta);
 void hostapd_ucode_add_bss(struct hostapd_data *hapd);
 void hostapd_ucode_free_bss(struct hostapd_data *hapd);
 void hostapd_ucode_reload_bss(struct hostapd_data *hapd);
-int hostapd_ucode_afc_request(struct hostapd_iface *iface, const char *request,
-			      char *buf, size_t len);
 
 #else
 
@@ -46,13 +42,6 @@ static inline void hostapd_ucode_free_iface(struct hostapd_iface *iface)
 static inline void hostapd_ucode_reload_bss(struct hostapd_data *hapd)
 {
 }
-static inline int hostapd_ucode_sta_auth(struct hostapd_data *hapd, struct sta_info *sta)
-{
-	return 0;
-}
-static inline void hostapd_ucode_sta_connected(struct hostapd_data *hapd, struct sta_info *sta)
-{
-}
 static inline void hostapd_ucode_add_bss(struct hostapd_data *hapd)
 {
 }

feeds/mediatek-sdk/hostapd/src/src/utils/ucode.c

@@ -52,12 +52,12 @@ uc_value_t *uc_wpa_freq_info(uc_vm_t *vm, size_t nargs)
 	uc_value_t *sec = uc_fn_arg(1);
 	int width = ucv_uint64_get(uc_fn_arg(2));
 	int freq_val, center_idx, center_ofs;
+	enum oper_chan_width chanwidth;
 	enum hostapd_hw_mode hw_mode;
 	u8 op_class, channel, tmp_channel;
 	const char *modestr;
 	int sec_channel = 0;
 	uc_value_t *ret;
-	int chanwidth;
 
 	if (ucv_type(freq) != UC_INTEGER)
 		return NULL;
@@ -77,13 +77,13 @@ uc_value_t *uc_wpa_freq_info(uc_vm_t *vm, size_t nargs)
 
 	switch (width) {
 	case 0:
-		chanwidth = CHANWIDTH_USE_HT;
+		chanwidth = CONF_OPER_CHWIDTH_USE_HT;
 		break;
 	case 1:
-		chanwidth = CHANWIDTH_80MHZ;
+		chanwidth = CONF_OPER_CHWIDTH_80MHZ;
 		break;
 	case 2:
-		chanwidth = CHANWIDTH_160MHZ;
+		chanwidth = CONF_OPER_CHWIDTH_160MHZ;
 		break;
 	default:
 		return NULL;

feeds/mediatek-sdk/hostapd/src/wpa_supplicant/ucode.c

@@ -136,6 +136,7 @@ static uc_value_t *
 uc_wpas_add_iface(uc_vm_t *vm, size_t nargs)
 {
 	uc_value_t *info = uc_fn_arg(0);
+	uc_value_t *driver = ucv_object_get(info, "driver", NULL);
 	uc_value_t *ifname = ucv_object_get(info, "iface", NULL);
 	uc_value_t *bridge = ucv_object_get(info, "bridge", NULL);
 	uc_value_t *config = ucv_object_get(info, "config", NULL);
@@ -154,6 +155,22 @@ uc_wpas_add_iface(uc_vm_t *vm, size_t nargs)
 		.ctrl_interface = ucv_string_get(ctrl),
 	};
 
+	if (driver) {
+		const char *drvname;
+		if (ucv_type(driver) != UC_STRING)
+			goto out;
+
+		iface.driver = NULL;
+		drvname = ucv_string_get(driver);
+		for (int i = 0; wpa_drivers[i]; i++) {
+			if (!strcmp(drvname, wpa_drivers[i]->name))
+				iface.driver = wpa_drivers[i]->name;
+		}
+
+		if (!iface.driver)
+			goto out;
+	}
+
 	if (!iface.ifname || !iface.confname)
 		goto out;
 

feeds/mediatek-sdk/mac80211/files/mac80211.hotplug

@@ -1,26 +1,5 @@
 #!/bin/sh
 
-. /lib/functions.sh
-. /lib/functions/system.sh
-
-mt76_generate_macs() {
-	sysfs="/sys/class/ieee80211"
-	board=$(board_name)
-
-	case ${board} in
-	sonicfi,rap630w-211g)
-		eth=$(fw_printenv | grep ethaddr | cut -d= -f2)
-		mac1=$(macaddr_add ${eth} 2)
-		mac2=$(macaddr_add ${eth} 3)
-		[ -d ${sysfs}/phy0 ] && echo ${mac1} > ${sysfs}/phy0/macaddress
-		[ -d ${sysfs}/phy1 ] && echo ${mac2} > ${sysfs}/phy1/macaddress
-		;;
-	*)
-		;;
-	esac
-}
-
 [ "${ACTION}" = "add" ] && {
-	mt76_generate_macs
 	/sbin/wifi config
 }

feeds/mediatek-sdk/mediatek/files-5.4/arch/arm64/boot/dts/mediatek/mt7981-edgecore-eap112.dts

@@ -1,378 +0,0 @@
-/dts-v1/;
-#include "mt7981.dtsi"
-/ {
-	model = "EdgeCore EAP112";
-	compatible = "edgecore,eap112";
-	chosen {
-		bootargs = "console=ttyS0,115200n1 loglevel=8  \
-				earlycon=uart8250,mmio32,0x11002000";
-	};
-
-	aliases {
-		led-boot = &led_green;
-		led-failsafe = &led_green;
-		led-running = &led_green;
-		led-upgrade = &led_green;
-		serial0 = &uart0;
-	};
-
-	memory {
-		// fpga ddr2: 128MB*2
-		reg = <0 0x40000000 0 0x20000000>;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		reset {
-			label = "reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&pio 1 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led_green: led@0 {
-			label = "green:power";
-			gpios = <&pio 9 GPIO_ACTIVE_HIGH>;
-		};
-
-		led_orange: led@1 {
-			label = "orange:wan";
-			gpios = <&pio 34 GPIO_ACTIVE_HIGH>;
-		};
-
-		led_blue: led@2 {
-			label = "blue:wlan5g";
-			gpios = <&pio 35 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	nmbm_spim_nand {
-		compatible = "generic,nmbm";
-
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		lower-mtd-device = <&spi_nand>;
-		forced-create;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "BL2";
-				reg = <0x00000 0x0100000>;
-				read-only;
-			};
-
-			partition@100000 {
-				label = "u-boot-env";
-				reg = <0x0100000 0x0080000>;
-			};
-
-			factory: partition@180000 {
-				label = "Factory";
-				reg = <0x180000 0x0200000>;
-			};
-
-			partition@380000 {
-				label = "FIP";
-				reg = <0x380000 0x0200000>;
-			};
-
-			partition@580000 {
-				label = "rootfs1";
-				reg = <0x580000 0x4000000>;
-				compatible = "linux,ubi";
-			};
-			
-			partition@4580000 {
-				label = "rootfs2";
-				reg = <0x4580000 0x4000000>;
-				compatible = "linux,ubi";
-			};
-		};
-	};
-
-	sound_wm8960 {
-		compatible = "mediatek,mt7986-wm8960-sound";
-		audio-routing = "Headphone", "HP_L",
-				"Headphone", "HP_R",
-				"LINPUT1", "AMIC",
-				"RINPUT1", "AMIC";
-
-		status = "disabled";
-
-		platform {
-			sound-dai = <&afe>;
-		};
-
-		codec {
-			sound-dai = <&wm8960>;
-		};
-	};
-
-	sound_si3218x {
-		compatible = "mediatek,mt7986-si3218x-sound";
-		status = "disabled";
-
-		platform {
-			sound-dai = <&afe>;
-		};
-
-		codec {
-			sound-dai = <&proslic_spi>;
-		};
-	};
-};
-
-&afe {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pcm_pins>;
-	status = "okay";
-};
-
-&i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c_pins>;
-	status = "disabled";
-
-	wm8960: wm8960@1a {
-		compatible = "wlf,wm8960";
-		reg = <0x1a>;
-	};
-};
-
-&uart0 {
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart2_pins>;
-	status = "okay";
-};
-
-&watchdog {
-	status = "okay";
-};
-
-&eth {
-        status = "okay";
-
-	gmac0: mac@0 {
-		compatible = "mediatek,eth-mac";
-		reg = <0>;
-		phy-mode = "sgmii";
-		phy-handle = <&phy1>;      // add phy handler
-		mtd-mac-address = <&factory 0x24>;
-	};
-
-	gmac1: mac@1 {
-		compatible = "mediatek,eth-mac";
-		reg = <1>;
-		phy-mode = "gmii";
-		phy-handle = <&phy0>;
-		mtd-mac-address = <&factory 0x2a>;
-	};
-
-        mdio: mdio-bus {
-                #address-cells = <1>;
-                #size-cells = <0>;
-
-		phy0: ethernet-phy@0 {
-			compatible = "ethernet-phy-id03a2.9461";
-			reg = <0>;
-			phy-mode = "gmii";
-			nvmem-cells = <&phy_calibration>;
-			nvmem-cell-names = "phy-cal-data";
-		};
-
-		phy1: ethernet-phy@1 {
-			compatible = "ethernet-phy-id03a2.9471";
-			reg = <24>;            // set phy address to 0x18
-			reset-gpios = <&pio 39 1>;
-			reset-assert-us = <600>;
-			reset-deassert-us = <20000>;
-			phy-mode = "sgmii";
-    };
-
-        };
-};
-
-&hnat {
-	mtketh-wan = "eth1";
-	mtketh-lan = "lan";
-	mtketh-max-gmac = <2>;
-	status = "okay";
-};
-
-&spi0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&spi0_flash_pins>;
-	status = "okay";
-	spi_nand: spi_nand@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "spi-nand";
-		reg = <0>;
-		spi-max-frequency = <52000000>;
-		spi-tx-bus-width = <4>;
-		spi-rx-bus-width = <4>;
-	};
-};
-
-&spi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&spic_pins>;
-	status = "okay";
-
-	proslic_spi: proslic_spi@0 {
-		compatible = "silabs,proslic_spi";
-		reg = <0>;
-		spi-max-frequency = <10000000>;
-		spi-cpha = <1>;
-		spi-cpol = <1>;
-		channel_count = <1>;
-		debug_level = <4>;       /* 1 = TRC, 2 = DBG, 4 = ERR */
-		reset_gpio = <&pio 15 0>;
-		ig,enable-spi = <1>;     /* 1: Enable, 0: Disable */
-	};
-};
-
-&wbsys {
-	mediatek,mtd-eeprom = <&factory 0x0000>;
-	status = "okay";
-	pinctrl-names = "dbdc";
-	pinctrl-0 = <&wf_dbdc_pins>;
-};
-
-&spi2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&spi2_pins>;
-	status = "okay";
-
-	slb9670: slb9670@0 {
-		compatible = "infineon,slb9670";
-		reg = <0>; /* CE0 */
-		#address-cells = <1>;
-		#size-cells = <0>;
-		spi-cal-enable;
-		spi-cal-mode = "read-data";
-		spi-cal-datalen = <2>;
-		spi-cal-data = /bits/ 8 <0x00 0x1b>;
-		spi-max-frequency = <40000000>;
-	};
-};
-
-&pio {
-
-	i2c_pins: i2c-pins-g0 {
-                mux {
-                        function = "i2c";
-                        groups = "i2c0_0";
-                };
-        };
-
-        pcm_pins: pcm-pins-g0 {
-                mux {
-                        function = "pcm";
-                        groups = "pcm";
-                };
-        };
-
-        pwm0_pin: pwm0-pin-g0 {
-                mux {
-                        function = "pwm";
-                        groups = "pwm0_0";
-                };
-        };
-
-        pwm1_pin: pwm1-pin-g0 {
-                mux {
-                        function = "pwm";
-                        groups = "pwm1_0";
-                };
-        };
-
-        pwm2_pin: pwm2-pin {
-                mux {
-                        function = "pwm";
-                        groups = "pwm2";
-                };
-        };
-
-	spi0_flash_pins: spi0-pins {
-		mux {
-			function = "spi";
-			groups = "spi0", "spi0_wp_hold";
-		};
-
-		conf-pu {
-			pins = "SPI0_CS", "SPI0_HOLD", "SPI0_WP";
-			drive-strength = <MTK_DRIVE_8mA>;
-			bias-pull-up = <MTK_PUPD_SET_R1R0_11>;
-		};
-
-		conf-pd {
-			pins = "SPI0_CLK", "SPI0_MOSI", "SPI0_MISO";
-			drive-strength = <MTK_DRIVE_8mA>;
-			bias-pull-down = <MTK_PUPD_SET_R1R0_11>;
-		};
-	};
-
-	spic_pins: spi1-pins {
-		mux {
-			function = "spi";
-			groups = "spi1_1";
-		};
-	};
-
-	spi2_pins: spi2-pins {
-		mux {
-			function = "spi";
-			groups = "spi2";
-		};
-	};
-
-	uart1_pins: uart1-pins-g1 {
-                mux {
-                        function = "uart";
-                        groups = "uart1_1";
-                };
-        };
-
-	uart2_pins: uart2-pins-g1 {
-		mux {
-                        function = "uart";
-                        groups = "uart2_1";
-                };
-        };
-
-	wf_dbdc_pins: wf_dbdc-pins {
-		mux {
-			function = "eth";
-			groups = "wf0_mode1";
-		};
-		conf {
-			pins = "WF_HB1", "WF_HB2", "WF_HB3", "WF_HB4",
-			       "WF_HB0", "WF_HB0_B", "WF_HB5", "WF_HB6",
-			       "WF_HB7", "WF_HB8", "WF_HB9", "WF_HB10",
-			       "WF_TOP_CLK", "WF_TOP_DATA", "WF_XO_REQ",
-			       "WF_CBA_RESETB", "WF_DIG_RESETB";
-			drive-strength = <MTK_DRIVE_4mA>;
-		};
-	};
-};
-
-&xhci {
-	mediatek,u3p-dis-msk = <0x0>;
-	phys = <&u2port0 PHY_TYPE_USB2>,
-	       <&u3port0 PHY_TYPE_USB3>;
-	status = "okay";
-};

feeds/mediatek-sdk/mediatek/files-5.4/arch/arm64/boot/dts/mediatek/mt7981b-sonicfi-rap630w-211g.dts

@@ -1,560 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-/dts-v1/;
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-
-#include "mt7981.dtsi"
-
-/ {
-	aliases {
-		serial0 = &uart0;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory {
-		reg = <0 0x40000000 0 0x10000000>;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		reset {
-			label = "reset";
-			gpios = <&pio 1 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-
-		mesh {
-			label = "mesh";
-			gpios = <&pio 0 GPIO_ACTIVE_LOW>;
-			linux,code = <BTN_9>;
-			linux,input-type = <EV_SW>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led_blue {
-			label = "sys:blue";
-			gpios = <&pio 23 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "timer";
-			active-delay = <500>;
-			inactive-delay = <500>;
-			default-state="on";
-		};
-
-		led_green {
-			label = "sys:green";
-			gpios = <&pio 24 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "timer";
-			active-delay = <500>;
-			inactive-delay = <500>;
-			default-state="on";
-		};
-
-		led_red {
-			label = "sys:red";
-			gpios = <&pio 25 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "timer";
-			active-delay = <500>;
-			inactive-delay = <500>;
-			default-state="on";
-		};
-	};
-};
-
-&eth {
-        status = "okay";
-
-        gmac0: mac@0 {
-                compatible = "mediatek,eth-mac";
-                reg = <0>;
-                phy-mode = "2500base-x";
-
-                fixed-link {
-                        speed = <2500>;
-                        full-duplex;
-                        pause;
-                };
-        };
-
-		gmac1: mac@1 {
-			compatible = "mediatek,eth-mac";
-			reg = <1>;
-			phy-mode = "gmii";
-			phy-handle = <&phy0>;
-		};
-
-        mdio: mdio-bus {
-                #address-cells = <1>;
-                #size-cells = <0>;
-
-		phy0: ethernet-phy@0 {
-			compatible = "ethernet-phy-id03a2.9461";
-			reg = <0>;
-			phy-mode = "gmii";
-			nvmem-cells = <&phy_calibration>;
-			nvmem-cell-names = "phy-cal-data";
-		};
-
-		switch@0 {
-					compatible = "mediatek,mt7531";
-					reg = <31>;
-					reset-gpios = <&pio 39 0>;
-
-					ports {
-							#address-cells = <1>;
-							#size-cells = <0>;
-
-							port@0 {
-									reg = <0>;
-									label = "lan1";
-							};
-
-							port@1 {
-									reg = <1>;
-									label = "lan2";
-							};
-
-							port@2 {
-									reg = <2>;
-									label = "lan3";
-							};
-
-							port@6 {
-									reg = <6>;
-									label = "cpu";
-									ethernet = <&gmac0>;
-									phy-mode = "2500base-x";
-
-									fixed-link {
-											speed = <2500>;
-											full-duplex;
-											pause;
-									};
-							};
-					};
-                };
-        };
-};
-
-&spi0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&spi0_flash_pins>;
-	status = "okay";
-
-	spi_nand: flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "spi-nand";
-		reg = <0>;
-
-		spi-max-frequency = <52000000>;
-		spi-tx-buswidth = <4>;
-		spi-rx-buswidth = <4>;
-
-		partitions: partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "BL2";
-				reg = <0x00 0x100000>;
-				read-only;
-			};
-
-			partition@100000 {
-				label = "u-boot-env";
-				reg = <0x0100000 0x0080000>;
-			};
-
-			factory: partition@180000 {
-				label = "Factory";
-				reg = <0x180000 0x200000>;
-				read-only;
-
-				compatible = "nvmem-cells";
-				#address-cells = <1>;
-				#size-cells = <1>;
-
-				macaddr_factory_4: macaddr@4 {
-					reg = <0x4 0x6>;
-				};
-			};
-
-			partition@380000 {
-				label = "FIP";
-				reg = <0x380000 0x200000>;
-				read-only;
-			};
-
-			partition@580000 {
-				label = "ubi";
-				reg = <0x580000 0x6000000>;
-			};
-
-			partition@7580000 {
-				label = "devinfo";
-				reg = <0x6580000 0x00080000>;
-			};
-
-			partition@7600000 {
-				label ="certificates";
-				reg = <0x6600000 0x00080000>;
-			};
-		};
-	};
-};
-
-&pio {
-	i2c_pins: i2c-pins-g0 {
-		mux {
-			function = "i2c";
-			groups = "i2c0_1";
-		};
-	};
-	spi0_flash_pins: spi0-pins {
-		mux {
-			function = "spi";
-			groups = "spi0", "spi0_wp_hold";
-		};
-
-		conf-pu {
-			pins = "SPI0_CS", "SPI0_HOLD", "SPI0_WP";
-			drive-strength = <MTK_DRIVE_8mA>;
-			bias-pull-up = <MTK_PUPD_SET_R1R0_11>;
-		};
-
-		conf-pd {
-			pins = "SPI0_CLK", "SPI0_MOSI", "SPI0_MISO";
-			drive-strength = <MTK_DRIVE_8mA>;
-			bias-pull-down = <MTK_PUPD_SET_R1R0_11>;
-		};
-	};
-	pse_out_en {
-			gpios = <&pio 27 GPIO_ACTIVE_HIGH>;
-			output-high;
-	};
-	pse_int_n {
-			gpios = <&pio 29 GPIO_ACTIVE_LOW>;
-			input;
-	};	
-};
-
-&hnat {
-        mtketh-wan = "eth1";
-        mtketh-lan = "lan";
-        mtketh-max-gmac = <2>;
-        status = "okay";
-};
-
-&i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c_pins>;
-	status = "okay";
-
-};
-
-&pio {
-	wf_dbdc_pins: wf_dbdc-pins {
-		mux {
-			function = "eth";
-			groups = "wf0_mode1";
-		};
-		conf {
-			pins = "WF_HB1", "WF_HB2", "WF_HB3", "WF_HB4",
-			       "WF_HB0", "WF_HB0_B", "WF_HB5", "WF_HB6",
-			       "WF_HB7", "WF_HB8", "WF_HB9", "WF_HB10",
-			       "WF_TOP_CLK", "WF_TOP_DATA", "WF_XO_REQ",
-			       "WF_CBA_RESETB", "WF_DIG_RESETB";
-			drive-strength = <MTK_DRIVE_4mA>;
-		};
-	};
-};
-
-&wbsys {
-	status = "okay";
-
-	mediatek,mtd-eeprom = <&factory 0x0>;
-	pinctrl-names = "dbdc";
-	pinctrl-0 = <&wf_dbdc_pins>;
-	power-limits {
-		r0 {
-			regdomain = "fcc";
-			txpower-2g {
-				r0 {
-					channels = <1 1>;
-					txs-delta = <0 0 0>;
-					rates-cck = <38 38 38 38>;
-					rates-ofdm = <37 37 37 37 37 37 37 37>;
-					rates-mcs =
-					<1 36 36 36 36 36 36 36 36 34 33>,
-					<3 34 34 34 34 34 34 34 34 34 33>;
-					rates-ru =
-					<4 36 36 36 36 36 36 36 36 34 33 32 32>,
-					<3 34 34 34 34 34 34 34 34 34 33 32 32>;
-				};
-				r1 {
-					channels = <2 3>;
-					txs-delta = <0 0 0>;
-					rates-cck = <38 38 38 38>;
-					rates-ofdm = <38 38 38 38 38 38 38 37>;
-					rates-mcs =
-					<1 38 38 38 38 38 38 37 36 34 33>,
-					<3 34 34 34 34 34 34 34 34 34 33>;
-					rates-ru =
-					<4 38 38 38 38 38 38 37 36 34 33 32 32>,
-					<3 34 34 34 34 34 34 34 34 34 33 32 32>;
-				};
-				r2 {
-					channels = <4 8>;
-					txs-delta = <0 0 0>;
-					rates-cck = <38 38 38 38>;
-					rates-ofdm = <38 38 38 38 38 38 38 37>;
-					rates-mcs =
-					<1 38 38 38 38 38 38 37 36 34 33>,
-					<3 36 36 36 36 36 36 36 36 34 33>;
-					rates-ru =
-					<4 38 38 38 38 38 38 37 36 34 33 32 32>,
-					<3 36 36 36 36 36 36 36 36 34 33 32 32>;
-				};
-				r3 {
-					channels = <9 14>;
-					txs-delta = <0 0 0>;
-					rates-cck = <38 38 38 38>;
-					rates-ofdm = <38 38 38 38 38 38 38 37>;
-					rates-mcs =
-					<1 38 38 38 38 38 38 37 36 34 33>,
-					<3 32 32 32 32 32 32 32 32 32 32>;
-					rates-ru =
-					<4 38 38 38 38 38 38 37 36 34 33 32 32>,
-					<3 32 32 32 32 32 32 32 32 32 32 32 32>;
-				};
-			};
-			txpower-5g {
-				r0 {
-					channels = <184 196>;
-					txs-delta = <0 0 0>;
-					rates-ofdm = <40 40 40 40 40 40 39 38>;
-					rates-mcs =
-					<2 40 40 40 40 40 39 38 36 35 34>,
-					<2 32 32 32 32 32 32 32 32 32 32>;
-					rates-ru =
-					<5 40 40 40 40 40 39 38 36 35 34 32 32>,
-					<1 32 32 32 32 32 32 32 32 32 32 32 32>,
-					<1 32 32 32 32 32 32 32 32 32 32 30 30>;
-				};
-				r1 {
-					channels = <8 16>;
-					txs-delta = <0 0 0>;
-					rates-ofdm = <40 40 40 40 40 40 39 38>;
-					rates-mcs =
-					<2 40 40 40 40 40 39 38 36 35 34>,
-					<2 32 32 32 32 32 32 32 32 32 32>;
-					rates-ru =
-					<5 40 40 40 40 40 39 38 36 35 34 32 32>,
-					<1 32 32 32 32 32 32 32 32 32 32 32 32>,
-					<1 32 32 32 32 32 32 32 32 32 32 30 30>;
-				};
-				r2 {
-					channels = <36 40>;
-					txs-delta = <0 0 0>;
-					rates-ofdm = <40 40 40 40 40 40 39 38>;
-					rates-mcs =
-					<1 40 40 40 40 40 39 38 36 35 34>,
-					<1 38 38 38 38 38 38 38 36 35 34>,
-					<2 32 32 32 32 32 32 32 32 32 32>;
-					rates-ru =
-					<4 40 40 40 40 40 39 38 36 35 34 32 32>,
-					<1 38 38 38 38 38 38 38 36 35 34 32 32>,
-					<1 32 32 32 32 32 32 32 32 32 32 32 32>,
-					<1 32 32 32 32 32 32 32 32 32 32 30 30>;
-				};
-				r3 {
-					channels = <44 44>;
-					txs-delta = <0 0 0>;
-					rates-ofdm = <40 40 40 40 40 40 39 38>;
-					rates-mcs =
-					<2 40 40 40 40 40 39 38 36 35 34>,
-					<2 32 32 32 32 32 32 32 32 32 32>;
-					rates-ru =
-					<5 40 40 40 40 40 39 38 36 35 34 32 32>,
-					<1 32 32 32 32 32 32 32 32 32 32 32 32>,
-					<1 32 32 32 32 32 32 32 32 32 32 30 30>;
-				};
-				r4 {
-					channels = <48 48>;
-					txs-delta = <0 0 0>;
-					rates-ofdm = <39 39 39 39 39 39 39 38>;
-					rates-mcs =
-					<2 40 40 40 40 40 39 38 36 35 34>,
-					<2 32 32 32 32 32 32 32 32 32 32>;
-					rates-ru =
-					<5 40 40 40 40 40 39 38 36 35 34 32 32>,
-					<1 32 32 32 32 32 32 32 32 32 32 32 32>,
-					<1 32 32 32 32 32 32 32 32 32 32 30 30>;
-				};
-				r5 {
-					channels = <52 96>;
-					txs-delta = <0 0 0>;
-					rates-ofdm = <36 36 36 36 36 36 36 36>;
-					rates-mcs =
-					<3 36 36 36 36 36 36 36 36 35 34>,
-					<1 32 32 32 32 32 32 32 32 32 32>;
-					rates-ru =
-					<6 36 36 36 36 36 36 36 36 35 34 32 32>,
-					<1 32 32 32 32 32 32 32 32 32 32 30 30>;
-				};
-				r6 {
-					channels = <100 112>;
-					txs-delta = <0 0 0>;
-					rates-ofdm = <36 36 36 36 36 36 36 36>;
-					rates-mcs =
-					<2 36 36 36 36 36 36 36 36 35 34>,
-					<1 35 35 35 35 35 35 35 35 35 34>,
-					<1 32 32 32 32 32 32 32 32 32 32>;
-					rates-ru =
-					<5 36 36 36 36 36 36 36 36 35 34 32 32>,
-					<1 35 35 35 35 35 35 35 35 35 34 32 32>,
-					<1 32 32 32 32 32 32 32 32 32 32 30 30>;
-				};
-				r7 {
-					channels = <116 144>;
-					txs-delta = <0 0 0>;
-					rates-ofdm = <36 36 36 36 36 36 36 36>;
-					rates-mcs =
-					<3 36 36 36 36 36 36 36 36 35 34>,
-					<1 32 32 32 32 32 32 32 32 32 32>;
-					rates-ru =
-					<6 36 36 36 36 36 36 36 36 35 34 32 32>,
-					<1 32 32 32 32 32 32 32 32 32 32 30 30>;
-				};
-				r8 {
-					channels = <149 181>;
-					txs-delta = <0 0 0>;
-					rates-ofdm = <40 40 40 40 40 40 39 38>;
-					rates-mcs =
-					<3 40 40 40 40 40 39 38 36 35 34>,
-					<1 32 32 32 32 32 32 32 32 32 32>;
-					rates-ru =
-					<6 40 40 40 40 40 39 38 36 35 34 32 32>,
-					<1 32 32 32 32 32 32 32 32 32 32 30 30>;
-				};
-			};
-		};
-		r1 {
-			regdomain = "etsi";
-			txpower-2g {
-				r0 {
-					channels = <1 14>;
-					txs-delta = <0 0 0>;
-					rates-cck = <29 29 29 29>;
-					rates-ofdm = <30 30 30 30 30 30 30 30>;
-					rates-mcs = 
-					<4 28 28 28 28 28 28 28 28 28 28>;
-					rates-ru = 
-					<7 28 28 28 28 28 28 28 28 28 28 28 28>;
-				};
-			};
-			txpower-5g {
-				r0 {
-					channels = <184 196>;
-					txs-delta = <0 0 0>;
-					rates-ofdm = <33 33 33 33 33 33 33 33>;
-					rates-mcs = 
-					<4 33 33 33 33 33 33 33 33 33 33>;
-					rates-ru = 
-					<6 33 33 33 33 33 33 33 33 33 33 32 32>,
-					<1 33 33 33 33 33 33 33 33 33 33 30 30>;
-				};
-				r1 {
-					channels = <8 16>;
-					txs-delta = <0 0 0>;
-					rates-ofdm = <33 33 33 33 33 33 33 33>;
-					rates-mcs = 
-					<4 33 33 33 33 33 33 33 33 33 33>;
-					rates-ru = 
-					<6 33 33 33 33 33 33 33 33 33 33 32 32>,
-					<1 33 33 33 33 33 33 33 33 33 33 30 30>;
-				};
-				r2 {
-					channels = <36 48>;
-					txs-delta = <0 0 0>;
-					rates-ofdm = <33 33 33 33 33 33 33 33>;
-					rates-mcs = 
-					<4 33 33 33 33 33 33 33 33 33 33>;
-					rates-ru = 
-					<6 33 33 33 33 33 33 33 33 33 33 32 32>,
-					<1 33 33 33 33 33 33 33 33 33 33 30 30>;
-				};
-				r3 {
-					channels = <52 96>;
-					txs-delta = <0 0 0>;
-					rates-ofdm = <33 33 33 33 33 33 33 33>;
-					rates-mcs = 
-					<1 32 32 32 32 32 32 32 32 32 32>,
-					<3 33 33 33 33 33 33 33 33 33 33>;
-					rates-ru = 
-					<4 32 32 32 32 32 32 32 32 32 32 32 32>,
-					<2 33 33 33 33 33 33 33 33 33 33 32 32>,
-					<1 33 33 33 33 33 33 33 33 33 33 30 30>;
-				};
-				r4 {
-					channels = <100 128>;
-					txs-delta = <0 0 0>;
-					rates-ofdm = <40 40 40 40 40 40 39 38>;
-					rates-mcs = 
-					<3 40 40 40 40 40 39 38 36 35 34>,
-					<1 40 40 40 39 39 38 36 35 34 33>;
-					rates-ru = 
-					<6 40 40 40 40 40 39 38 36 35 34 32 32>,
-					<1 40 40 40 39 39 38 36 35 34 33 30 30>;
-				};
-				r5 {
-					channels = <132 144>;
-					txs-delta = <0 0 0>;
-					rates-ofdm = <40 40 40 40 40 40 39 38>;
-					rates-mcs = 
-					<3 40 40 40 40 40 39 38 36 35 34>,
-					<1 32 32 32 32 32 32 32 32 32 32>;
-					rates-ru = 
-					<6 40 40 40 40 40 39 38 36 35 34 32 32>,
-					<1 32 32 32 32 32 32 32 32 32 32 30 30>;
-				};
-				r6 {
-					channels = <149 181>;
-					txs-delta = <0 0 0>;
-					rates-ofdm = <40 40 40 40 40 40 39 38>;
-					rates-mcs = 
-					<3 40 40 40 40 40 39 38 36 35 34>,
-					<1 32 32 32 32 32 32 32 32 32 32>;
-					rates-ru = 
-					<6 40 40 40 40 40 39 38 36 35 34 32 32>,
-					<1 32 32 32 32 32 32 32 32 32 32 30 30>;
-				};
-			};
-		};
-	};
-};
-
-&uart0 {
-	status = "okay";
-};
-
-&watchdog {
-	status = "okay";
-};
-
-
-/ {
-	model = "SONICFI RAP630W-211G";
-	compatible = "sonicfi,rap630w-211g", "mediatek,mt7981";
-};
-
-

feeds/mediatek-sdk/mediatek/image/mt7981.mk

@@ -61,52 +61,6 @@ define Device/edgecore_eap111
 endef
 TARGET_DEVICES += edgecore_eap111
 
-define Device/edgecore_eap112
-  DEVICE_VENDOR := EdgeCore
-  DEVICE_MODEL := EAP112
-  DEVICE_DTS := mt7981-edgecore-eap112
-  DEVICE_DTS_DIR := $(DTS_DIR)/mediatek
-  SUPPORTED_DEVICES := edgecore,eap112
-  UBINIZE_OPTS := -E 5
-  BLOCKSIZE := 128k
-  PAGESIZE := 2048
-  IMAGE_SIZE := 65536k
-  KERNEL_IN_UBI := 1
-  IMAGES += factory.bin
-  IMAGE/factory.bin := append-ubi | check-size $$$$(IMAGE_SIZE)
-  IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
-  DEVICE_PACKAGES := kmod-mt7981-firmware kmod-mt7915e
-endef
-TARGET_DEVICES += edgecore_eap112
-
-define Device/sonicfi_rap630w_211g
-  DEVICE_VENDOR := SONICFI
-  DEVICE_MODEL := RAP630W-211G
-  DEVICE_DTS := mt7981b-sonicfi-rap630w-211g
-  DEVICE_DTS_DIR := $(DTS_DIR)/mediatek
-  SUPPORTED_DEVICES := sonicfi,rap630w-211g
-  DEVICE_PACKAGES := kmod-mt7981-firmware kmod-mt7915e kmod-hwmon-tps23861 \
-	e2fsprogs f2fsck mkf2fs
-  KERNEL := kernel-bin | lzma | \
-	  fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
-  KERNEL_INITRAMFS := kernel-bin | lzma | \
-	fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
-  KERNEL_INITRAMFS_SUFFIX := -recovery.itb
-  KERNEL_IN_UBI := 1
-  UBINIZE_OPTS := -E 5
-  BLOCKSIZE := 128k
-  PAGESIZE := 2048
-  IMAGE_SIZE := 65536k
-  ROOTFSNAME_IN_UBI := rootfs
-  UBOOTENV_IN_UBI := 1
-  IMAGES := sysupgrade.tar
-  IMAGE/sysupgrade.itb := append-kernel | \
-	 fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | \
-	 pad-rootfs | append-metadata
-  IMAGE/sysupgrade.tar := sysupgrade-tar | append-metadata
-endef
-TARGET_DEVICES += sonicfi_rap630w_211g
-
 define Device/mt7981-spim-nand-gsw
   DEVICE_VENDOR := MediaTek
   DEVICE_MODEL := mt7981-spim-nand-gsw

feeds/mediatek-sdk/mediatek/mt7981-edgecore-eap112.dts

@@ -1,378 +0,0 @@
-/dts-v1/;
-#include "mt7981.dtsi"
-/ {
-	model = "EdgeCore EAP112";
-	compatible = "edgecore,eap112";
-	chosen {
-		bootargs = "console=ttyS0,115200n1 loglevel=8  \
-				earlycon=uart8250,mmio32,0x11002000";
-	};
-
-	aliases {
-		led-boot = &led_green;
-		led-failsafe = &led_green;
-		led-running = &led_green;
-		led-upgrade = &led_green;
-		serial0 = &uart0;
-	};
-
-	memory {
-		// fpga ddr2: 128MB*2
-		reg = <0 0x40000000 0 0x20000000>;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		reset {
-			label = "reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&pio 1 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led_green: led@0 {
-			label = "green:power";
-			gpios = <&pio 9 GPIO_ACTIVE_HIGH>;
-		};
-
-		led_orange: led@1 {
-			label = "orange:wan";
-			gpios = <&pio 34 GPIO_ACTIVE_HIGH>;
-		};
-
-		led_blue: led@2 {
-			label = "blue:wlan5g";
-			gpios = <&pio 35 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	nmbm_spim_nand {
-		compatible = "generic,nmbm";
-
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		lower-mtd-device = <&spi_nand>;
-		forced-create;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "BL2";
-				reg = <0x00000 0x0100000>;
-				read-only;
-			};
-
-			partition@100000 {
-				label = "u-boot-env";
-				reg = <0x0100000 0x0080000>;
-			};
-
-			factory: partition@180000 {
-				label = "Factory";
-				reg = <0x180000 0x0200000>;
-			};
-
-			partition@380000 {
-				label = "FIP";
-				reg = <0x380000 0x0200000>;
-			};
-
-			partition@580000 {
-				label = "rootfs1";
-				reg = <0x580000 0x4000000>;
-				compatible = "linux,ubi";
-			};
-			
-			partition@4580000 {
-				label = "rootfs2";
-				reg = <0x4580000 0x4000000>;
-				compatible = "linux,ubi";
-			};
-		};
-	};
-
-	sound_wm8960 {
-		compatible = "mediatek,mt7986-wm8960-sound";
-		audio-routing = "Headphone", "HP_L",
-				"Headphone", "HP_R",
-				"LINPUT1", "AMIC",
-				"RINPUT1", "AMIC";
-
-		status = "disabled";
-
-		platform {
-			sound-dai = <&afe>;
-		};
-
-		codec {
-			sound-dai = <&wm8960>;
-		};
-	};
-
-	sound_si3218x {
-		compatible = "mediatek,mt7986-si3218x-sound";
-		status = "disabled";
-
-		platform {
-			sound-dai = <&afe>;
-		};
-
-		codec {
-			sound-dai = <&proslic_spi>;
-		};
-	};
-};
-
-&afe {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pcm_pins>;
-	status = "okay";
-};
-
-&i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c_pins>;
-	status = "disabled";
-
-	wm8960: wm8960@1a {
-		compatible = "wlf,wm8960";
-		reg = <0x1a>;
-	};
-};
-
-&uart0 {
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart2_pins>;
-	status = "okay";
-};
-
-&watchdog {
-	status = "okay";
-};
-
-&eth {
-        status = "okay";
-
-	gmac0: mac@0 {
-		compatible = "mediatek,eth-mac";
-		reg = <0>;
-		phy-mode = "sgmii";
-		phy-handle = <&phy1>;      // add phy handler
-		mtd-mac-address = <&factory 0x24>;
-	};
-
-	gmac1: mac@1 {
-		compatible = "mediatek,eth-mac";
-		reg = <1>;
-		phy-mode = "gmii";
-		phy-handle = <&phy0>;
-		mtd-mac-address = <&factory 0x2a>;
-	};
-
-        mdio: mdio-bus {
-                #address-cells = <1>;
-                #size-cells = <0>;
-
-		phy0: ethernet-phy@0 {
-			compatible = "ethernet-phy-id03a2.9461";
-			reg = <0>;
-			phy-mode = "gmii";
-			nvmem-cells = <&phy_calibration>;
-			nvmem-cell-names = "phy-cal-data";
-		};
-
-		phy1: ethernet-phy@1 {
-			compatible = "ethernet-phy-id03a2.9471";
-			reg = <24>;            // set phy address to 0x18
-			reset-gpios = <&pio 39 1>;
-			reset-assert-us = <600>;
-			reset-deassert-us = <20000>;
-			phy-mode = "sgmii";
-    };
-
-        };
-};
-
-&hnat {
-	mtketh-wan = "eth1";
-	mtketh-lan = "lan";
-	mtketh-max-gmac = <2>;
-	status = "okay";
-};
-
-&spi0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&spi0_flash_pins>;
-	status = "okay";
-	spi_nand: spi_nand@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "spi-nand";
-		reg = <0>;
-		spi-max-frequency = <52000000>;
-		spi-tx-bus-width = <4>;
-		spi-rx-bus-width = <4>;
-	};
-};
-
-&spi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&spic_pins>;
-	status = "okay";
-
-	proslic_spi: proslic_spi@0 {
-		compatible = "silabs,proslic_spi";
-		reg = <0>;
-		spi-max-frequency = <10000000>;
-		spi-cpha = <1>;
-		spi-cpol = <1>;
-		channel_count = <1>;
-		debug_level = <4>;       /* 1 = TRC, 2 = DBG, 4 = ERR */
-		reset_gpio = <&pio 15 0>;
-		ig,enable-spi = <1>;     /* 1: Enable, 0: Disable */
-	};
-};
-
-&wbsys {
-	mediatek,mtd-eeprom = <&factory 0x0000>;
-	status = "okay";
-	pinctrl-names = "dbdc";
-	pinctrl-0 = <&wf_dbdc_pins>;
-};
-
-&spi2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&spi2_pins>;
-	status = "okay";
-
-	slb9670: slb9670@0 {
-		compatible = "infineon,slb9670";
-		reg = <0>; /* CE0 */
-		#address-cells = <1>;
-		#size-cells = <0>;
-		spi-cal-enable;
-		spi-cal-mode = "read-data";
-		spi-cal-datalen = <2>;
-		spi-cal-data = /bits/ 8 <0x00 0x1b>;
-		spi-max-frequency = <40000000>;
-	};
-};
-
-&pio {
-
-	i2c_pins: i2c-pins-g0 {
-                mux {
-                        function = "i2c";
-                        groups = "i2c0_0";
-                };
-        };
-
-        pcm_pins: pcm-pins-g0 {
-                mux {
-                        function = "pcm";
-                        groups = "pcm";
-                };
-        };
-
-        pwm0_pin: pwm0-pin-g0 {
-                mux {
-                        function = "pwm";
-                        groups = "pwm0_0";
-                };
-        };
-
-        pwm1_pin: pwm1-pin-g0 {
-                mux {
-                        function = "pwm";
-                        groups = "pwm1_0";
-                };
-        };
-
-        pwm2_pin: pwm2-pin {
-                mux {
-                        function = "pwm";
-                        groups = "pwm2";
-                };
-        };
-
-	spi0_flash_pins: spi0-pins {
-		mux {
-			function = "spi";
-			groups = "spi0", "spi0_wp_hold";
-		};
-
-		conf-pu {
-			pins = "SPI0_CS", "SPI0_HOLD", "SPI0_WP";
-			drive-strength = <MTK_DRIVE_8mA>;
-			bias-pull-up = <MTK_PUPD_SET_R1R0_11>;
-		};
-
-		conf-pd {
-			pins = "SPI0_CLK", "SPI0_MOSI", "SPI0_MISO";
-			drive-strength = <MTK_DRIVE_8mA>;
-			bias-pull-down = <MTK_PUPD_SET_R1R0_11>;
-		};
-	};
-
-	spic_pins: spi1-pins {
-		mux {
-			function = "spi";
-			groups = "spi1_1";
-		};
-	};
-
-	spi2_pins: spi2-pins {
-		mux {
-			function = "spi";
-			groups = "spi2";
-		};
-	};
-
-	uart1_pins: uart1-pins-g1 {
-                mux {
-                        function = "uart";
-                        groups = "uart1_1";
-                };
-        };
-
-	uart2_pins: uart2-pins-g1 {
-		mux {
-                        function = "uart";
-                        groups = "uart2_1";
-                };
-        };
-
-	wf_dbdc_pins: wf_dbdc-pins {
-		mux {
-			function = "eth";
-			groups = "wf0_mode1";
-		};
-		conf {
-			pins = "WF_HB1", "WF_HB2", "WF_HB3", "WF_HB4",
-			       "WF_HB0", "WF_HB0_B", "WF_HB5", "WF_HB6",
-			       "WF_HB7", "WF_HB8", "WF_HB9", "WF_HB10",
-			       "WF_TOP_CLK", "WF_TOP_DATA", "WF_XO_REQ",
-			       "WF_CBA_RESETB", "WF_DIG_RESETB";
-			drive-strength = <MTK_DRIVE_4mA>;
-		};
-	};
-};
-
-&xhci {
-	mediatek,u3p-dis-msk = <0x0>;
-	phys = <&u2port0 PHY_TYPE_USB2>,
-	       <&u3port0 PHY_TYPE_USB3>;
-	status = "okay";
-};

feeds/mediatek-sdk/mediatek/mt7981/base-files/etc/board.d/01_leds

@@ -6,8 +6,7 @@ board=$(board_name)
 board_config_update
 
 case $board in
-edgecore,eap111|\
-edgecore,eap112)
+edgecore,eap111)
 	ucidef_set_led_netdev "wan" "wan" "orange:wan" "eth1"
 	ucidef_set_led_netdev "wlan5g" "WLAN5G" "blue:wlan5g" "phy1-ap0"
 	;;

feeds/mediatek-sdk/mediatek/mt7981/base-files/etc/board.d/02_network

@@ -1,9 +1,8 @@
 #!/bin/sh
-. /lib/uboot-envtools.sh
+
 . /lib/functions.sh
 . /lib/functions/uci-defaults.sh
 . /lib/functions/system.sh
-. /lib/rap211g-envtools.sh
 
 mediatek_setup_interfaces()
 {
@@ -23,10 +22,7 @@ mediatek_setup_interfaces()
 	*2500wan-p5*)
 		ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" wan
 		;;
-	sonicfi,rap630w-211g)
-		ucidef_set_interfaces_lan_wan "lan1 lan2 lan3" eth1
-		;;		
-	*)	
+	*)
 		ucidef_set_interfaces_lan_wan "eth0" "eth1"
 		;;
 	esac
@@ -42,49 +38,10 @@ mediatek_setup_macs()
 	local wan_mac_offset=""
 
 	case $board in
-	edgecore,eap111|\
-	edgecore,eap112)
+	edgecore,eap111)
 		lan_mac_offset="0x24"
 		wan_mac_offset="0x2a"
 		;;
-	sonicfi,rap630w-211g)
-		sysfs="/sys/class/ieee80211"
-		env_dev=$(get_boot_param "boot_param.env_part")
-		if [ -n "$env_dev" ]; then
-			mtdnum="$( find_mtd_index "$CI_UBIPART" )"
-			if [ ! "$mtdnum" ]; then
-				echo "cannot find ubi mtd partition $CI_UBIPART"
-				return 1
-			fi
-
-			ubidev="$( nand_find_ubi "$CI_UBIPART" )"
-			if [ ! "$ubidev" ]; then
-				ubiattach -m "$mtdnum"
-				sync
-				ubidev="$( nand_find_ubi "$CI_UBIPART" )"
-			fi
-
-			env_ubivol="$( nand_find_volume "${ubidev}" ${env_dev} )"
-			if [ -n "${env_ubivol}" ]; then
-				#ubootenv_add_uci_config "/dev/$env_ubivol" "0" "0x80000" "0x80000" 1
-				echo "/dev/$env_ubivol 0 0x80000 0x80000 1" > /etc/fw_env.config
-			fi
-		fi
-		#echo "/dev/ubi0_0 0 0x80000 0x80000 1" > /etc/fw_env.config
-		mac=$(fw_printenv | grep ethaddr | cut -d= -f2)
-		wan_mac=$(macaddr_canonicalize $mac)
-		[ -z "$mac" ] && return;
-		wan_mac=$(macaddr_canonicalize $mac)
-		lan_mac=$(macaddr_add "$wan_mac" 1)
-		ucidef_set_interface_macaddr "lan" "$lan_mac"
-		ucidef_set_interface_macaddr "wan" "$wan_mac"
-		ucidef_set_label_macaddr "$wan_mac"
-		mac1=$(macaddr_add ${mac} 2)
-		mac2=$(macaddr_add ${mac} 3)
-		[ -d ${sysfs}/phy0 ] && echo ${mac1} > ${sysfs}/phy0/macaddress
-		[ -d ${sysfs}/phy1 ] && echo ${mac2} > ${sysfs}/phy1/macaddress
-		return
-		;;
 	*)
 		lan_mac_offset="0x2A"
 		wan_mac_offset="0x24"

feeds/mediatek-sdk/mediatek/mt7981/base-files/etc/init.d/boocount

@@ -4,8 +4,7 @@ START=99
 
 boot() {
 	case $(board_name) in
-	edgecore,eap111|\
-	edgecore,eap112)
+	edgecore,eap111)
 		bootcount=$(fw_printenv -n bootcount)
 		[ "$bootcount" != 0 ] && fw_setenv bootcount 0
 		;;

feeds/mediatek-sdk/mediatek/mt7981/base-files/etc/uci-defaults/30_uboot-envtools

@@ -8,42 +8,16 @@ touch /etc/config/ubootenv
 
 . /lib/uboot-envtools.sh
 . /lib/functions.sh
-. /lib/functions/uci-defaults.sh
-. /lib/functions/system.sh
-. /lib/rap211g-envtools.sh
 
 board=$(board_name)
 
 case "$board" in
-edgecore,eap111|\
-edgecore,eap112)
+edgecore,eap111)
 	ubootenv_add_uci_config "/dev/mtd2" "0x0" "0x20000" "0x20000"
 	;;
-sonicfi,rap630w-211g)
-	#env_dev=$(cat /sys/module/boot_param/parameters/env_part 2>/dev/null)
-	env_dev=$(get_boot_param "boot_param.env_part")
-	if [ -n "$env_dev" ]; then
-		mtdnum="$( find_mtd_index "$CI_UBIPART" )"
-		if [ ! "$mtdnum" ]; then
-			echo "cannot find ubi mtd partition $CI_UBIPART"
-			return 1
-		fi
-
-		ubidev="$( nand_find_ubi "$CI_UBIPART" )"
-		if [ ! "$ubidev" ]; then
-			ubiattach -m "$mtdnum"
-			sync
-			ubidev="$( nand_find_ubi "$CI_UBIPART" )"
-		fi
-
-		env_ubivol="$( nand_find_volume "${ubidev}" ${env_dev} )"
-		if [ -n "${env_ubivol}" ]; then
-			ubootenv_add_uci_config "/dev/$env_ubivol" "0" "0x80000" "0x80000" 1
-		fi
-	fi
-	;;	
 esac
 
 config_load ubootenv
 config_foreach ubootenv_add_app_config
+
 exit 0

feeds/mediatek-sdk/mediatek/mt7981/base-files/lib/rap211g-envtools.sh

@@ -1,99 +0,0 @@
-#
-# Copyright (C) 2021 OpenWrt.org
-#
-
-. /lib/uboot-envtools.sh
-. /lib/functions.sh
-. /lib/functions/uci-defaults.sh
-. /lib/functions/system.sh
-
-CI_UBIPART=ubi
-
-ubi_mknod() {
-        local dir="$1"
-        local dev="/dev/$(basename $dir)"
-
-        [ -e "$dev" ] && return 0
-
-        local devid="$(cat $dir/dev)"
-        local major="${devid%%:*}"
-        local minor="${devid##*:}"
-        mknod "$dev" c $major $minor
-}
-
-get_boot_param()
-{
-	local cmdline_param=$(cat /proc/cmdline)
-	local name
-	for var in $cmdline_param
-	do
-		#echo "aaa---$var"
-		if [ $var == $1 ];
-		then
-			echo "Y"
-			return
-		else
-			name=$(echo $var | awk -F '=' '{print $1}')
-			#echo "$name"
-			if [ $name == $1 ];
-			then
-					echo $(echo $var | awk -F '=' '{print $2}')
-					return
-			fi
-		fi
-	done
-	echo "N"
-}
-
-block_dev_path() {
-	local dev_path
-
-	case "$1" in
-	/dev/mmcblk*)
-		dev_path="$1"
-		;;
-	PARTLABEL=* | PARTUUID=*)
-		dev_path=$(blkid -t "$1" -o device)
-		[ -z "${dev_path}" -o $? -ne 0 ] && return 1
-		;;
-	*)
-		return 1;
-		;;
-	esac
-
-	echo "${dev_path}"
-	return 0
-}
-
-nand_find_volume() {
-	local ubidevdir ubivoldir
-	ubidevdir="/sys/devices/virtual/ubi/$1"
-	[ ! -d "$ubidevdir" ] && return 1
-	for ubivoldir in $ubidevdir/${1}_*; do
-		[ ! -d "$ubivoldir" ] && continue
-		if [ "$( cat $ubivoldir/name )" = "$2" ]; then
-			basename $ubivoldir
-			ubi_mknod "$ubivoldir"
-			return 0
-		fi
-	done
-}
-
-nand_find_ubi() {
-	local ubidevdir ubidev mtdnum
-	mtdnum="$( find_mtd_index $1 )"
-	[ ! "$mtdnum" ] && return 1
-	for ubidevdir in /sys/devices/virtual/ubi/ubi*; do
-		[ ! -d "$ubidevdir" ] && continue
-		cmtdnum="$( cat $ubidevdir/mtd_num )"
-		[ ! "$mtdnum" ] && continue
-		if [ "$mtdnum" = "$cmtdnum" ]; then
-			ubidev=$( basename $ubidevdir )
-			ubi_mknod "$ubidevdir"
-			echo $ubidev
-			return 0
-		fi
-	done
-}
-
-