mediatek: Add EMPLUS WAP588M model

Specifications:
SoC: MediaTek MT7981B
RF Chipset: MT7976C @2.4GHz 2T2R
MT7976C @5ghz 2T2R
RAM: 512MB DDR4 RAM
Flash: SPI-NAND 128 MiB
Ethernet: 2 x 1GbE PHY
Reset Button: 1
Power on/off switch dip: 1
Power Source: Standard PoE 802.3af/at
LED Indicator: 5x Single-color LED indicator (GPIO Control)

Signed-off-by: 800246@emplustech.com <cp.chang@emplustech.com>

.github/workflows/build-dev.yml

@@ -21,7 +21,7 @@ jobs:
     strategy:
       fail-fast: false
       matrix:
-        target: [ 'cig_wf186h', 'cig_wf186w', 'cig_wf188n', 'cig_wf189', 'cig_wf196', 'cig_wf196', 'cybertan_eww631-a1', 'cybertan_eww631-b1', 'sonicfi_rap630w-312g', 'sonicfi_rap63xc-211g', 'sonicfi_rap630c-311g', 'sonicfi_rap630w-311g', 'sonicfi_rap630w-211g', 'sonicfi_rap7110c-341x', 'edgecore_eap101', 'edgecore_eap102', 'edgecore_eap104', 'edgecore_eap105', 'edgecore_eap111', 'edgecore_eap112', 'edgecore_oap101', 'edgecore_oap101-6e', 'edgecore_oap101e', 'edgecore_oap101e-6e', 'edgecore_oap103', 'hfcl_ion4xe', 'hfcl_ion4xi', 'hfcl_ion4x', 'hfcl_ion4x_2', 'hfcl_ion4x_3', 'hfcl_ion4xi_w', 'hfcl_ion4x_w', 'indio_um-305ax', 'senao_iap4300m', 'senao_iap2300m', 'senao_jeap6500', 'udaya_a6-id2', 'udaya_a6-od2', 'yuncore_ax820', 'yuncore_ax840', 'yuncore_fap640', 'yuncore_fap650', 'yuncore_fap655' ]
+        target: [ 'cig_wf186h', 'cig_wf186w', 'cig_wf188n', 'cig_wf189', 'cig_wf196', 'cig_wf196', 'cybertan_eww631-a1', 'cybertan_eww631-b1', 'sonicfi_rap630w-312g', 'sonicfi_rap63xc-211g', 'sonicfi_rap630c-311g', 'sonicfi_rap630w-311g', 'sonicfi_rap630w-211g', 'sonicfi_rap650c', 'sonicfi_rap7110c-341x', 'sonicfi_rap750w-311a', 'edgecore_eap101', 'edgecore_eap102', 'edgecore_eap104', 'edgecore_eap105', 'edgecore_eap111', 'edgecore_eap112', 'edgecore_oap101', 'edgecore_oap101-6e', 'edgecore_oap101e', 'edgecore_oap101e-6e', 'edgecore_oap103', 'hfcl_ion4xe', 'hfcl_ion4xi', 'hfcl_ion4x', 'hfcl_ion4x_2', 'hfcl_ion4x_3', 'hfcl_ion4xi_w', 'hfcl_ion4x_w', 'indio_um-305ax', 'senao_iap4300m', 'senao_iap2300m', 'senao_jeap6500', 'udaya_a6-id2', 'udaya_a6-od2', 'yuncore_ax820', 'yuncore_ax840', 'yuncore_fap640', 'yuncore_fap650', 'yuncore_fap655', 'emplus_wap588m' ]
     steps:
     - uses: actions/checkout@v3
 

feeds/hostapd/hostapd/patches/zzzz-001-fix-assoc-reject-during-roaming.patch

@@ -0,0 +1,46 @@
+Index: hostapd-2023-09-08-e5ccbfc6/src/ap/wpa_auth_ft.c
+===================================================================
+--- hostapd-2023-09-08-e5ccbfc6.orig/src/ap/wpa_auth_ft.c
++++ hostapd-2023-09-08-e5ccbfc6/src/ap/wpa_auth_ft.c
+@@ -3293,6 +3297,8 @@ static int wpa_ft_process_auth_req(struc
+ 	size_t identity_len = 0, radius_cui_len = 0;
+ 	size_t pmk_r1_len, kdk_len, len;
+ 	int retval = WLAN_STATUS_UNSPECIFIED_FAILURE;
++	struct os_reltime now;
++	struct rsn_ftie *ftie;
+ 
+ 	*resp_ies = NULL;
+ 	*resp_ies_len = 0;
+@@ -3324,6 +3330,9 @@ static int wpa_ft_process_auth_req(struc
+ 		goto out;
+ 	}
+ 
++	ftie = (struct rsn_ftie *) parse.ftie;
++	os_memcpy(sm->SNonce, ftie->snonce, WPA_NONCE_LEN);
++
+ 	if (parse.r0kh_id == NULL) {
+ 		wpa_printf(MSG_DEBUG, "FT: Invalid FTIE - no R0KH-ID");
+ 		retval = WLAN_STATUS_INVALID_FTIE;
+@@ -3424,10 +3433,18 @@ pmk_r1_derived:
+ 	os_memcpy(sm->pmk_r1, pmk_r1, pmk_r1_len);
+ 	sm->pmk_r1_len = pmk_r1_len;
+ 
+-	if (random_get_bytes(sm->ANonce, WPA_NONCE_LEN)) {
+-		wpa_printf(MSG_DEBUG, "FT: Failed to get random data for "
+-			   "ANonce");
+-		goto out;
++	if (os_get_reltime(&now) < 0 ||
++	    os_reltime_expired(&now, &sm->ANonce_time, 1)) {
++		if (random_get_bytes(sm->ANonce, WPA_NONCE_LEN)) {
++			wpa_printf(MSG_DEBUG, "FT: Failed to get random data for "
++				   "ANonce");
++			return WLAN_STATUS_UNSPECIFIED_FAILURE;
++		}
++		sm->ANonce_time.sec = now.sec;
++		sm->ANonce_time.usec = now.usec;
++		wpa_printf(MSG_INFO, "FT: ANonce was randomized");
++	} else {
++		wpa_printf(MSG_INFO, "FT: ANonce has not expired");
+ 	}
+ 
+ 	/* Now that we know the correct PMK-R1 length and as such, the length

feeds/ipq807x_v5.4/ath11k-wifi/Makefile

@@ -53,6 +53,7 @@ ALLWIFIBOARDS:= \
 	sonicfi-rap630c-311g \
 	sonicfi-rap630w-311g \
 	sonicfi-rap630w-312g \
+	sonicfi-rap650c \
 	tplink-ex227 \
 	tplink-ex447 \
 	yuncore-ax840 \
@@ -410,6 +411,7 @@ $(eval $(call generate-ath11k-wifi-package,indio-um-510axm-v1,Indio UM-510AXM V1
 $(eval $(call generate-ath11k-wifi-package,sonicfi-rap630c-311g,Sonicfi RAP630C 311G))
 $(eval $(call generate-ath11k-wifi-package,sonicfi-rap630w-311g,Sonicfi RAP630W 311G))
 $(eval $(call generate-ath11k-wifi-package,sonicfi-rap630w-312g,Sonicfi RAP630W 312G))
+$(eval $(call generate-ath11k-wifi-package,sonicfi-rap650c,SonicFi RAP650C))
 $(eval $(call generate-ath11k-wifi-package,tplink-ex227,TP-Link EX227))
 $(eval $(call generate-ath11k-wifi-package,tplink-ex447,TP-Link EX447))
 $(eval $(call generate-ath11k-wifi-package,yuncore-ax840,YunCore AX840))

feeds/ipq807x_v5.4/hostapd/patches/t00-013-proxy-arp-fail-gracefully.patch

@@ -0,0 +1,27 @@
+--- a/src/ap/hostapd.c
++++ b/src/ap/hostapd.c
+@@ -1527,19 +1527,15 @@ int hostapd_setup_bss(struct hostapd_dat
+ 		if (x_snoop_init(hapd)) {
+ 			wpa_printf(MSG_ERROR,
+ 				   "Generic snooping infrastructure initialization failed");
+-			return -1;
+-		}
+-
+-		if (dhcp_snoop_init(hapd)) {
++			conf->proxy_arp = 0;
++		} else if (dhcp_snoop_init(hapd)) {
+ 			wpa_printf(MSG_ERROR,
+ 				   "DHCP snooping initialization failed");
+-			return -1;
+-		}
+-
+-		if (ndisc_snoop_init(hapd)) {
++			conf->proxy_arp = 0;
++		} else if (ndisc_snoop_init(hapd)) {
+ 			wpa_printf(MSG_ERROR,
+ 				   "Neighbor Discovery snooping initialization failed");
+-			return -1;
++			conf->proxy_arp = 0;
+ 		}
+ 	}
+ 

feeds/ipq807x_v5.4/hostapd/patches/zzz-FT-Store-PMK-R0-PMK-R1-after-EAPOL-Key-msg-2-4-MIC-v.patch

@@ -0,0 +1,411 @@
+From: Jouni Malinen <quic_jouni@quicinc.com>
+Date: Tue, 14 Feb 2023 11:29:30 +0200
+Subject: [PATCH] FT: Store PMK-R0/PMK-R1 after EAPOL-Key msg 2/4 MIC
+ validation
+
+hostapd was previously storing the derived PMK-R0 and PMK-R1 as soon as
+these keys were derived. While that is fine for most purposes, it is
+unnecessary to do that so quickly and if anything were to fail before
+the supplicant is able to return a valid EAPOL-Key msg 2/4, there would
+not really be any real use for the derived keys.
+
+For the special case of FT-PSK and VLAN determination based on the
+wpa_psk file, the VLAN information is set in the per-STA data structures
+only after the EAPOL-Key msg 2/4 MIC has been verified. This ended up
+storing the PMK-R0/PMK-R1 entries without correct VLAN assignment and as
+such, any use of the FT protocol would not be able to transfer the VLAN
+information through RRB.
+
+Split local storing of the FT key hierarchy for the cases using the FT
+4-way handshake so that PMK-R0 and PMK-R1 are first derived and then
+stored as a separate step after having verified the MIC in the EAPOL-Key
+msg 2/4 (i.e., after having confirmed the per-STA passphrase/PSK was
+selected) and VLAN update. This fixes VLAN information for the
+wpa_psk_file cases with FT-PSK.
+
+Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
+---
+
+--- a/src/ap/wpa_auth.c
++++ b/src/ap/wpa_auth.c
+@@ -58,7 +58,9 @@ static int wpa_group_config_group_keys(s
+ 				       struct wpa_group *group);
+ static int wpa_derive_ptk(struct wpa_state_machine *sm, const u8 *snonce,
+ 			  const u8 *pmk, unsigned int pmk_len,
+-			  struct wpa_ptk *ptk, int force_sha256);
++			  struct wpa_ptk *ptk, int force_sha256,
++			  u8 *pmk_r0, u8 *pmk_r1, u8 *pmk_r0_name,
++			  size_t *key_len);
+ static void wpa_group_free(struct wpa_authenticator *wpa_auth,
+ 			   struct wpa_group *group);
+ static void wpa_group_get(struct wpa_authenticator *wpa_auth,
+@@ -940,6 +942,10 @@ static int wpa_try_alt_snonce(struct wpa
+ 	const u8 *pmk = NULL;
+ 	size_t pmk_len;
+ 	int vlan_id = 0;
++	u8 pmk_r0[PMK_LEN_MAX], pmk_r0_name[WPA_PMK_NAME_LEN];
++	u8 pmk_r1[PMK_LEN_MAX];
++	size_t key_len;
++	int ret = -1;
+ 
+ 	os_memset(&PTK, 0, sizeof(PTK));
+ 	for (;;) {
+@@ -961,8 +967,8 @@ static int wpa_try_alt_snonce(struct wpa
+ 			pmk_len = sm->pmk_len;
+ 		}
+ 
+-		if (wpa_derive_ptk(sm, sm->alt_SNonce, pmk, pmk_len, &PTK, 0) <
+-		    0)
++		if (wpa_derive_ptk(sm, sm->alt_SNonce, pmk, pmk_len, &PTK, 0,
++				   pmk_r0, pmk_r1, pmk_r0_name, &key_len) < 0)
+ 			break;
+ 
+ 		if (wpa_verify_key_mic(sm->wpa_key_mgmt, pmk_len, &PTK,
+@@ -983,7 +989,7 @@ static int wpa_try_alt_snonce(struct wpa
+ 	if (!ok) {
+ 		wpa_printf(MSG_DEBUG,
+ 			   "WPA: Earlier SNonce did not result in matching MIC");
+-		return -1;
++		goto fail;
+ 	}
+ 
+ 	wpa_printf(MSG_DEBUG,
+@@ -992,14 +998,26 @@ static int wpa_try_alt_snonce(struct wpa
+ 
+ 	if (vlan_id && wpa_key_mgmt_wpa_psk(sm->wpa_key_mgmt) &&
+ 	    wpa_auth_update_vlan(sm->wpa_auth, sm->addr, vlan_id) < 0)
+-		return -1;
++		goto fail;
++
++#ifdef CONFIG_IEEE80211R_AP
++	if (wpa_key_mgmt_ft(sm->wpa_key_mgmt) && !sm->ft_completed) {
++		wpa_printf(MSG_DEBUG, "FT: Store PMK-R0/PMK-R1");
++		wpa_auth_ft_store_keys(sm, pmk_r0, pmk_r1, pmk_r0_name,
++				       key_len);
++	}
++#endif /* CONFIG_IEEE80211R_AP */
+ 
+ 	os_memcpy(sm->SNonce, sm->alt_SNonce, WPA_NONCE_LEN);
+ 	os_memcpy(&sm->PTK, &PTK, sizeof(PTK));
+ 	forced_memzero(&PTK, sizeof(PTK));
+ 	sm->PTK_valid = true;
+ 
+-	return 0;
++	ret = 0;
++fail:
++	forced_memzero(pmk_r0, sizeof(pmk_r0));
++	forced_memzero(pmk_r1, sizeof(pmk_r1));
++	return ret;
+ }
+ 
+ 
+@@ -2283,7 +2301,9 @@ SM_STATE(WPA_PTK, PTKSTART)
+ 
+ static int wpa_derive_ptk(struct wpa_state_machine *sm, const u8 *snonce,
+ 			  const u8 *pmk, unsigned int pmk_len,
+-			  struct wpa_ptk *ptk, int force_sha256)
++			  struct wpa_ptk *ptk, int force_sha256,
++			  u8 *pmk_r0, u8 *pmk_r1, u8 *pmk_r0_name,
++			  size_t *key_len)
+ {
+ 	const u8 *z = NULL;
+ 	size_t z_len = 0, kdk_len;
+@@ -2311,7 +2331,8 @@ static int wpa_derive_ptk(struct wpa_sta
+ 						 sm->pairwise,
+ 						 kdk_len);
+ 		}
+-		return wpa_auth_derive_ptk_ft(sm, ptk);
++		return wpa_auth_derive_ptk_ft(sm, ptk, pmk_r0, pmk_r1,
++					      pmk_r0_name, key_len);
+ 	}
+ #endif /* CONFIG_IEEE80211R_AP */
+ 
+@@ -2934,6 +2955,9 @@ SM_STATE(WPA_PTK, PTKCALCNEGOTIATING)
+ 	struct wpa_eapol_ie_parse kde;
+ 	int vlan_id = 0;
+ 	int owe_ptk_workaround = !!wpa_auth->conf.owe_ptk_workaround;
++	u8 pmk_r0[PMK_LEN_MAX], pmk_r0_name[WPA_PMK_NAME_LEN];
++	u8 pmk_r1[PMK_LEN_MAX];
++	size_t key_len;
+ 
+ 	SM_ENTRY_MA(WPA_PTK, PTKCALCNEGOTIATING, wpa_ptk);
+ 	sm->EAPOLKeyReceived = false;
+@@ -2972,7 +2996,8 @@ SM_STATE(WPA_PTK, PTKCALCNEGOTIATING)
+ 		}
+ 
+ 		if (wpa_derive_ptk(sm, sm->SNonce, pmk, pmk_len, &PTK,
+-				   owe_ptk_workaround == 2) < 0)
++				   owe_ptk_workaround == 2, pmk_r0, pmk_r1,
++				   pmk_r0_name, &key_len) < 0)
+ 			break;
+ 
+ 		if (mic_len &&
+@@ -3021,7 +3046,7 @@ SM_STATE(WPA_PTK, PTKCALCNEGOTIATING)
+ 						 sm->last_rx_eapol_key,
+ 						 sm->last_rx_eapol_key_len);
+ 		sm->waiting_radius_psk = 1;
+-		return;
++		goto out;
+ 	}
+ 
+ 	if (!ok) {
+@@ -3029,7 +3054,7 @@ SM_STATE(WPA_PTK, PTKCALCNEGOTIATING)
+ 				"invalid MIC in msg 2/4 of 4-Way Handshake");
+ 		if (psk_found)
+ 			wpa_auth_psk_failure_report(sm->wpa_auth, sm->addr);
+-		return;
++		goto out;
+ 	}
+ 
+ 	/*
+@@ -3043,12 +3068,12 @@ SM_STATE(WPA_PTK, PTKCALCNEGOTIATING)
+ 	key_data_length = WPA_GET_BE16(mic + mic_len);
+ 	if (key_data_length > sm->last_rx_eapol_key_len - sizeof(*hdr) -
+ 	    sizeof(*key) - mic_len - 2)
+-		return;
++		goto out;
+ 
+ 	if (wpa_parse_kde_ies(key_data, key_data_length, &kde) < 0) {
+ 		wpa_auth_vlogger(wpa_auth, sm->addr, LOGGER_INFO,
+ 				 "received EAPOL-Key msg 2/4 with invalid Key Data contents");
+-		return;
++		goto out;
+ 	}
+ 	if (kde.rsn_ie) {
+ 		eapol_key_ie = kde.rsn_ie;
+@@ -3075,7 +3100,7 @@ SM_STATE(WPA_PTK, PTKCALCNEGOTIATING)
+ 		/* MLME-DEAUTHENTICATE.request */
+ 		wpa_sta_disconnect(wpa_auth, sm->addr,
+ 				   WLAN_REASON_PREV_AUTH_NOT_VALID);
+-		return;
++		goto out;
+ 	}
+ 	if ((!sm->rsnxe && kde.rsnxe) ||
+ 	    (sm->rsnxe && !kde.rsnxe) ||
+@@ -3091,7 +3116,7 @@ SM_STATE(WPA_PTK, PTKCALCNEGOTIATING)
+ 		/* MLME-DEAUTHENTICATE.request */
+ 		wpa_sta_disconnect(wpa_auth, sm->addr,
+ 				   WLAN_REASON_PREV_AUTH_NOT_VALID);
+-		return;
++		goto out;
+ 	}
+ #ifdef CONFIG_OCV
+ 	if (wpa_auth_uses_ocv(sm)) {
+@@ -3103,14 +3128,14 @@ SM_STATE(WPA_PTK, PTKCALCNEGOTIATING)
+ 		if (wpa_channel_info(wpa_auth, &ci) != 0) {
+ 			wpa_auth_logger(wpa_auth, sm->addr, LOGGER_INFO,
+ 					"Failed to get channel info to validate received OCI in EAPOL-Key 2/4");
+-			return;
++			goto out;
+ 		}
+ 
+ 		if (get_sta_tx_parameters(sm,
+ 					  channel_width_to_int(ci.chanwidth),
+ 					  ci.seg1_idx, &tx_chanwidth,
+ 					  &tx_seg1_idx) < 0)
+-			return;
++			goto out;
+ 
+ 		res = ocv_verify_tx_params(kde.oci, kde.oci_len, &ci,
+ 					   tx_chanwidth, tx_seg1_idx);
+@@ -3127,7 +3152,7 @@ SM_STATE(WPA_PTK, PTKCALCNEGOTIATING)
+ 					OCV_FAILURE "addr=" MACSTR
+ 					" frame=eapol-key-m2 error=%s",
+ 					MAC2STR(sm->addr), ocv_errorstr);
+-			return;
++			goto out;
+ 		}
+ 	}
+ #endif /* CONFIG_OCV */
+@@ -3135,7 +3160,7 @@ SM_STATE(WPA_PTK, PTKCALCNEGOTIATING)
+ 	if (ft && ft_check_msg_2_of_4(wpa_auth, sm, &kde) < 0) {
+ 		wpa_sta_disconnect(wpa_auth, sm->addr,
+ 				   WLAN_REASON_PREV_AUTH_NOT_VALID);
+-		return;
++		goto out;
+ 	}
+ #endif /* CONFIG_IEEE80211R_AP */
+ #ifdef CONFIG_P2P
+@@ -3171,7 +3196,7 @@ SM_STATE(WPA_PTK, PTKCALCNEGOTIATING)
+ 				   "DPP: Peer indicated it supports PFS and local configuration allows this, but PFS was not negotiated for the association");
+ 			wpa_sta_disconnect(wpa_auth, sm->addr,
+ 					   WLAN_REASON_PREV_AUTH_NOT_VALID);
+-			return;
++			goto out;
+ 		}
+ 	}
+ #endif /* CONFIG_DPP2 */
+@@ -3191,7 +3216,7 @@ SM_STATE(WPA_PTK, PTKCALCNEGOTIATING)
+ 				    sm->sup_pmk_r1_name, WPA_PMK_NAME_LEN);
+ 			wpa_hexdump(MSG_DEBUG, "FT: Derived PMKR1Name",
+ 				    sm->pmk_r1_name, WPA_PMK_NAME_LEN);
+-			return;
++			goto out;
+ 		}
+ 	}
+ #endif /* CONFIG_IEEE80211R_AP */
+@@ -3200,7 +3225,7 @@ SM_STATE(WPA_PTK, PTKCALCNEGOTIATING)
+ 	    wpa_auth_update_vlan(wpa_auth, sm->addr, vlan_id) < 0) {
+ 		wpa_sta_disconnect(wpa_auth, sm->addr,
+ 				   WLAN_REASON_PREV_AUTH_NOT_VALID);
+-		return;
++		goto out;
+ 	}
+ 
+ 	sm->pending_1_of_4_timeout = 0;
+@@ -3216,9 +3241,20 @@ SM_STATE(WPA_PTK, PTKCALCNEGOTIATING)
+ 
+ 	sm->MICVerified = true;
+ 
++#ifdef CONFIG_IEEE80211R_AP
++	if (wpa_key_mgmt_ft(sm->wpa_key_mgmt) && !sm->ft_completed) {
++		wpa_printf(MSG_DEBUG, "FT: Store PMK-R0/PMK-R1");
++		wpa_auth_ft_store_keys(sm, pmk_r0, pmk_r1, pmk_r0_name,
++				       key_len);
++	}
++#endif /* CONFIG_IEEE80211R_AP */
++
+ 	os_memcpy(&sm->PTK, &PTK, sizeof(PTK));
+ 	forced_memzero(&PTK, sizeof(PTK));
+ 	sm->PTK_valid = true;
++out:
++	forced_memzero(pmk_r0, sizeof(pmk_r0));
++	forced_memzero(pmk_r1, sizeof(pmk_r1));
+ }
+ 
+ 
+--- a/src/ap/wpa_auth_ft.c
++++ b/src/ap/wpa_auth_ft.c
+@@ -2175,13 +2175,13 @@ int wpa_ft_store_pmk_fils(struct wpa_sta
+ }
+ 
+ 
+-int wpa_auth_derive_ptk_ft(struct wpa_state_machine *sm, struct wpa_ptk *ptk)
++int wpa_auth_derive_ptk_ft(struct wpa_state_machine *sm, struct wpa_ptk *ptk,
++			   u8 *pmk_r0, u8 *pmk_r1, u8 *pmk_r0_name,
++			   size_t *key_len)
+ {
+-	u8 pmk_r0[PMK_LEN_MAX], pmk_r0_name[WPA_PMK_NAME_LEN];
+ 	size_t pmk_r0_len = wpa_key_mgmt_sha384(sm->wpa_key_mgmt) ?
+ 		SHA384_MAC_LEN : PMK_LEN;
+ 	size_t pmk_r1_len = pmk_r0_len;
+-	u8 pmk_r1[PMK_LEN_MAX];
+ 	u8 ptk_name[WPA_PMK_NAME_LEN];
+ 	const u8 *mdid = sm->wpa_auth->conf.mobility_domain;
+ 	const u8 *r0kh = sm->wpa_auth->conf.r0_key_holder;
+@@ -2189,13 +2189,6 @@ int wpa_auth_derive_ptk_ft(struct wpa_st
+ 	const u8 *r1kh = sm->wpa_auth->conf.r1_key_holder;
+ 	const u8 *ssid = sm->wpa_auth->conf.ssid;
+ 	size_t ssid_len = sm->wpa_auth->conf.ssid_len;
+-	int psk_local = sm->wpa_auth->conf.ft_psk_generate_local;
+-	int expires_in = sm->wpa_auth->conf.r0_key_lifetime;
+-	struct vlan_description vlan;
+-	struct rate_description rate;
+-	const u8 *identity, *radius_cui;
+-	size_t identity_len, radius_cui_len;
+-	int session_timeout;
+ 	const u8 *mpmk;
+ 	size_t mpmk_len;
+ 
+@@ -2211,10 +2204,41 @@ int wpa_auth_derive_ptk_ft(struct wpa_st
+ 		return -1;
+ 	}
+ 
++	*key_len = pmk_r0_len;
++	if (wpa_derive_pmk_r0(mpmk, mpmk_len, ssid, ssid_len, mdid,
++			      r0kh, r0kh_len, sm->addr,
++			      pmk_r0, pmk_r0_name,
++			      pmk_r0_len == SHA384_MAC_LEN) < 0 ||
++	    wpa_derive_pmk_r1(pmk_r0, pmk_r0_len, pmk_r0_name, r1kh, sm->addr,
++			      pmk_r1, sm->pmk_r1_name) < 0)
++		return -1;
++
++	return wpa_pmk_r1_to_ptk(pmk_r1, pmk_r1_len, sm->SNonce, sm->ANonce,
++				 sm->addr, sm->wpa_auth->addr, sm->pmk_r1_name,
++				 ptk, ptk_name, sm->wpa_key_mgmt, sm->pairwise,
++				 0);
++}
++
++
++void wpa_auth_ft_store_keys(struct wpa_state_machine *sm, const u8 *pmk_r0,
++			    const u8 *pmk_r1, const u8 *pmk_r0_name,
++			    size_t key_len)
++{
++	int psk_local = sm->wpa_auth->conf.ft_psk_generate_local;
++	int expires_in = sm->wpa_auth->conf.r0_key_lifetime;
++	struct vlan_description vlan;
++	struct rate_description rate;
++	const u8 *identity, *radius_cui;
++	size_t identity_len, radius_cui_len;
++	int session_timeout;
++
++	if (psk_local && wpa_key_mgmt_ft_psk(sm->wpa_key_mgmt))
++		return;
++
+ 	if (wpa_ft_get_vlan(sm->wpa_auth, sm->addr, &vlan) < 0) {
+ 		wpa_printf(MSG_DEBUG, "FT: vlan not available for STA " MACSTR,
+ 			   MAC2STR(sm->addr));
+-		return -1;
++		return;
+ 	}
+ 
+ 	wpa_ft_get_rate_limit(sm->wpa_auth, sm->addr, &rate);
+@@ -2224,32 +2248,16 @@ int wpa_auth_derive_ptk_ft(struct wpa_st
+ 					       &radius_cui);
+ 	session_timeout = wpa_ft_get_session_timeout(sm->wpa_auth, sm->addr);
+ 
+-	if (wpa_derive_pmk_r0(mpmk, mpmk_len, ssid, ssid_len, mdid,
+-			      r0kh, r0kh_len, sm->addr,
+-			      pmk_r0, pmk_r0_name,
+-			      wpa_key_mgmt_sha384(sm->wpa_key_mgmt)) < 0)
+-		return -1;
+-	if (!psk_local || !wpa_key_mgmt_ft_psk(sm->wpa_key_mgmt))
+-		wpa_ft_store_pmk_r0(sm->wpa_auth, sm->addr, pmk_r0, pmk_r0_len,
+-				    pmk_r0_name,
+-				    sm->pairwise, &vlan, expires_in,
+-				    session_timeout, identity, identity_len,
+-				    radius_cui, radius_cui_len, &rate);
+-
+-	if (wpa_derive_pmk_r1(pmk_r0, pmk_r0_len, pmk_r0_name, r1kh, sm->addr,
+-			      pmk_r1, sm->pmk_r1_name) < 0)
+-		return -1;
+-	if (!psk_local || !wpa_key_mgmt_ft_psk(sm->wpa_key_mgmt))
+-		wpa_ft_store_pmk_r1(sm->wpa_auth, sm->addr, pmk_r1, pmk_r1_len,
+-				    sm->pmk_r1_name, sm->pairwise, &vlan,
+-				    expires_in, session_timeout, identity,
+-				    identity_len, radius_cui, radius_cui_len,
+-				    &rate);
+-
+-	return wpa_pmk_r1_to_ptk(pmk_r1, pmk_r1_len, sm->SNonce, sm->ANonce,
+-				 sm->addr, sm->wpa_auth->addr, sm->pmk_r1_name,
+-				 ptk, ptk_name, sm->wpa_key_mgmt, sm->pairwise,
+-				 0);
++	wpa_ft_store_pmk_r0(sm->wpa_auth, sm->addr, pmk_r0, key_len,
++			    pmk_r0_name,
++			    sm->pairwise, &vlan, expires_in,
++			    session_timeout, identity, identity_len,
++			    radius_cui, radius_cui_len, &rate);
++
++	wpa_ft_store_pmk_r1(sm->wpa_auth, sm->addr, pmk_r1, key_len,
++			    sm->pmk_r1_name, sm->pairwise, &vlan,
++			    expires_in, session_timeout, identity,
++			    identity_len, radius_cui, radius_cui_len, &rate);
+ }
+ 
+ 
+--- a/src/ap/wpa_auth_i.h
++++ b/src/ap/wpa_auth_i.h
+@@ -302,7 +302,12 @@ int wpa_write_ftie(struct wpa_auth_confi
+ 		   const u8 *anonce, const u8 *snonce,
+ 		   u8 *buf, size_t len, const u8 *subelem,
+ 		   size_t subelem_len, int rsnxe_used);
+-int wpa_auth_derive_ptk_ft(struct wpa_state_machine *sm, struct wpa_ptk *ptk);
++int wpa_auth_derive_ptk_ft(struct wpa_state_machine *sm, struct wpa_ptk *ptk,
++			   u8 *pmk_r0, u8 *pmk_r1, u8 *pmk_r0_name,
++			   size_t *key_len);
++void wpa_auth_ft_store_keys(struct wpa_state_machine *sm, const u8 *pmk_r0,
++			    const u8 *pmk_r1, const u8 *pmk_r0_name,
++			    size_t key_len);
+ struct wpa_ft_pmk_cache * wpa_ft_pmk_cache_init(void);
+ void wpa_ft_pmk_cache_deinit(struct wpa_ft_pmk_cache *cache);
+ void wpa_ft_install_ptk(struct wpa_state_machine *sm, int retry);

feeds/ipq807x_v5.4/ipq50xx/base-files/etc/board.d/02_network

@@ -13,10 +13,10 @@ qcom_setup_interfaces()
 
 	case $board in
 	cig,wf186w)
-		ucidef_add_switch "switch0" "4:wan" "0:lan" "1:lan" "2:lan" "3:lan" "6@eth0"
+		ucidef_add_switch "switch0" "4:wan" "0:lan" "1:lan" "2:lan" "3:lan" "6u@eth0"
 		;;
 	cig,wf186h)
-		ucidef_add_switch "switch0" "4:wan" "1:lan" "2:lan" "6@eth0"
+		ucidef_add_switch "switch0" "4:wan" "1:lan" "2:lan" "6u@eth0"
 		;;
 	sonicfi,rap630c-311g|\
 	cybertan,eww631-a1)
@@ -25,7 +25,7 @@ qcom_setup_interfaces()
 		;;
 	sonicfi,rap630w-311g|\
 	cybertan,eww631-b1)
-		ucidef_add_switch "switch1" "5:wan" "2:lan" "3:lan" "4:lan" "6@eth0"
+		ucidef_add_switch "switch1" "5:wan" "2:lan" "3:lan" "4:lan" "6u@eth0"
 		;;
 	udaya,a6-id2)
 		ucidef_set_interface_wan "eth1"
@@ -46,7 +46,7 @@ qcom_setup_interfaces()
 	edgecore,eap104)
 		ucidef_set_interface_wan "eth0"
 		ucidef_add_switch "switch1" \
-			"6@eth1" "1:lan" "2:lan" "3:lan" "4:lan"
+			"6u@eth1" "1:lan" "2:lan" "3:lan" "4:lan"
 		;;
 	hfcl,ion4x_w|\
 	hfcl,ion4xi_w)
@@ -62,10 +62,10 @@ qcom_setup_interfaces()
 	sonicfi,rap630w-312g|\
 	yuncore,fap655)
 		ucidef_add_switch "switch1" \
-			"6@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan"
+			"6u@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan"
 		;;
 	glinet,b3000)
-		ucidef_add_switch "switch1" "6@eth1" "1:wan" "2:lan" "3:lan"
+		ucidef_add_switch "switch1" "6u@eth1" "1:wan" "2:lan" "3:lan"
 		;;
 	esac
 }

feeds/ipq807x_v5.4/ipq807x/base-files/etc/board.d/01_leds

@@ -21,6 +21,7 @@ edgecore,oap103)
         ucidef_set_led_wlan "power" "POWER" "green:power" "default-on"
 	;;
 sonicfi,rap630w-311g|\
+sonicfi,rap650c|\
 cybertan,eww631-b1)
 	ucidef_set_led_default "power" "POWER" "sys:blue" "on"
 	;;

feeds/ipq807x_v5.4/ipq807x/base-files/etc/board.d/02_network

@@ -24,6 +24,7 @@ qcom_setup_interfaces()
 	edgecore,eap102|\
 	edgecore,oap102|\
 	edgecore,oap103|\
+	sonicfi,rap650c|\
 	cig,wf196)
 		ucidef_set_interface_lan "eth1"
 		ucidef_set_interface_wan "eth0"
@@ -50,6 +51,16 @@ qcom_setup_macs()
 		ip link set eth1 address $lan_mac
 		ucidef_set_label_macaddr $wan_mac
 		;;
+	sonicfi,rap650c)
+		mac=$(fw_printenv -n BaseMacAddress)
+		[ -z "$mac" ] && return;
+		wan_mac=$(macaddr_canonicalize $mac)
+		lan_mac=$(macaddr_add "$wan_mac" 1)
+		ucidef_set_network_device_mac eth0 $wan_mac
+		ucidef_set_network_device_mac eth1 $lan_mac
+		ip link set eth0 address $wan_mac
+		ip link set eth1 address $lan_mac
+		;;
 	*)
 		wan_mac=$(cat /sys/class/net/eth0/address)
 		lan_mac=$(macaddr_add "$wan_mac" 1)

feeds/ipq807x_v5.4/ipq807x/base-files/etc/hotplug.d/firmware/10-ath11k-caldata

@@ -16,6 +16,20 @@ ath11k_generate_macs() {
 	echo -ne \\x${mac3//:/\\x} >> /lib/firmware/ath11k-macs
 }
 
+ath11k_generate_macs_sonicfi() {
+	mac=$(fw_printenv -n BaseMacAddress)
+	[ -z "$mac" ] && return;
+
+	touch /lib/firmware/ath11k-macs
+	eth=$(macaddr_canonicalize $mac)
+	mac1=$(macaddr_add $eth 2)
+	mac2=$(macaddr_add $eth 3)
+	mac3=$(macaddr_add $eth 4)
+	echo -ne \\x${mac1//:/\\x} >> /lib/firmware/ath11k-macs
+	echo -ne \\x${mac2//:/\\x} >> /lib/firmware/ath11k-macs
+	echo -ne \\x${mac3//:/\\x} >> /lib/firmware/ath11k-macs
+}
+
 ath11k_generate_macs_wf196() {
 	touch /lib/firmware/ath11k-macs
 	mac=$(grep BaseMacAddress= /dev/mtd18 | cut -dx -f2)
@@ -63,6 +77,7 @@ case "$FIRMWARE" in
 	tplink,ex227|\
 	tplink,ex447|\
 	yuncore,ax840|\
+	sonicfi,rap650c|\
 	sercomm,wallaby)
                 caldata_extract "0:ART" 0x1000 0x20000
 		;;
@@ -97,6 +112,9 @@ ath11k-macs)
 	cig,wf196)
 		ath11k_generate_macs_wf196
 		;;
+	sonicfi*)
+		ath11k_generate_macs_sonicfi
+		;;
 	esac
 	;;
 ath11k/IPQ8074/hw2.0/board.bin)

feeds/ipq807x_v5.4/ipq807x/base-files/etc/hotplug.d/firmware/11-ath11k-pdev-stats

@@ -10,7 +10,8 @@ case "$board" in
         ln -s /sys/kernel/debug/ath11k/ipq6018\ hw1.0/mac1/fw_stats/pdev_stats /tmp/pdev_stats_phy2g
         ;;
     "edgecore,eap102"|\
-    "edgecore,oap103")
+    "edgecore,oap103"|\
+    "sonicfi,rap650c")
         ln -s /sys/kernel/debug/ath11k/ipq8074\ hw2.0/mac0/fw_stats/pdev_stats /tmp/pdev_stats_phy5g
         ln -s /sys/kernel/debug/ath11k/ipq8074\ hw2.0/mac1/fw_stats/pdev_stats /tmp/pdev_stats_phy2g
         ;;

feeds/ipq807x_v5.4/ipq807x/base-files/lib/upgrade/platform.sh

@@ -29,6 +29,7 @@ platform_check_image() {
 	edgecore,oap102|\
 	edgecore,oap103|\
 	edgecore,eap106|\
+	sonicfi,rap650c|\
 	tplink,ex227|\
 	tplink,ex447)
 		[ "$magic_long" = "73797375" ] && return 0
@@ -83,5 +84,17 @@ platform_do_upgrade() {
 		fi
 		nand_upgrade_tar "$1"
 		;;
+	sonicfi,rap650c)
+		boot_part=$(fw_printenv -n bootfrom)
+		[ ${#boot_part} -eq 0 ] && boot_part=0
+		echo "Current bootfrom is $boot_part"
+		if [[ $boot_part == 1 ]]; then
+			CI_UBIPART="rootfs"
+			CI_FWSETENV="bootfrom 0"
+		elif [[ $boot_part == 0 ]]; then
+			CI_UBIPART="rootfs_1"
+			CI_FWSETENV="bootfrom 1"
+		fi
+		nand_upgrade_tar "$1"
 	esac
 }

feeds/ipq807x_v5.4/ipq807x/files/arch/arm64/boot/dts/qcom/qcom-ipq807x-rap650c.dts

@@ -0,0 +1,650 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/dts-v1/;
+/* Copyright (c) 2020 The Linux Foundation. All rights reserved.
+ */
+#include "ipq8074.dtsi"
+#include "ipq8074-hk-cpu.dtsi"
+
+/ {
+	#address-cells = <0x2>;
+	#size-cells = <0x2>;
+	model = "SonicFi RAP650C";
+	compatible = "sonicfi,rap650c", "qcom,ipq8074-ap-hk09", "qcom,ipq8074";
+	qcom,msm-id = <0x157 0x0>, <0x187 0x0>;
+	interrupt-parent = <&intc>;
+
+	aliases {
+		serial0 = &blsp1_uart5;
+		/* Aliases as required by u-boot to patch MAC addresses */
+		ethernet0 = "/soc/dp1";
+		ethernet1 = "/soc/dp2";
+
+		led-boot = &led_power;
+		led-failsafe = &led_power;
+		led-running = &led_power;
+		led-upgrade = &led_power;
+	};
+
+	chosen {
+		stdout-path = "serial0";
+	};
+
+	soc {
+		pinctrl@1000000 {
+			button_pins: button_pins {
+				reset_button {
+					pins = "gpio57";
+					function = "gpio";
+					drive-strength = <8>;
+					bias-pull-up;
+				};
+			};
+
+			usb_mux_sel_pins: usb_mux_pins {
+				mux {
+					pins = "gpio27";
+					function = "gpio";
+					drive-strength = <8>;
+					bias-pull-down;
+				};
+			};
+
+			pcie0_pins: pcie_pins {
+				pcie0_rst {
+					pins = "gpio58";
+					function = "pcie0_rst";
+					drive-strength = <8>;
+					bias-pull-down;
+				};
+				pcie0_wake {
+					pins = "gpio59";
+					function = "pcie0_wake";
+					drive-strength = <8>;
+					bias-pull-down;
+				};
+			};
+
+			mdio_pins: mdio_pinmux {
+				mux_0 {
+					pins = "gpio68";
+					function = "mdc";
+					drive-strength = <8>;
+					bias-pull-up;
+				};
+				mux_1 {
+					pins = "gpio69";
+					function = "mdio";
+					drive-strength = <8>;
+					bias-pull-up;
+				};
+				mux_2 {
+					pins = "gpio25";
+					function = "gpio";
+					bias-pull-up;
+				};
+				mux_3 {
+					pins = "gpio44";
+					function = "gpio";
+					bias-pull-up;
+				};
+			};
+
+			led_pins: led_pins {
+				red {
+					pins = "gpio0";
+					function = "gpio";
+					drive-strength = <8>;
+					bias-pull-down;
+				};
+
+				green {
+					pins = "gpio2";
+					function = "gpio";
+					drive-strength = <8>;
+					bias-pull-down;
+				};
+
+				blue {
+					pins = "gpio9";
+					function = "gpio";
+					drive-strength = <8>;
+					bias-pull-down;
+				};
+			};
+
+			spi_3_pins: spi_3_pins {
+				mux {
+					pins = "gpio50", "gpio52", "gpio53";
+					function = "blsp3_spi";
+					drive-strength = <8>;
+					bias-disable;
+				};
+				spi_cs {
+					pins = "gpio22";
+					function = "blsp3_spi2";
+					drive-strength = <8>;
+					bias-disable;
+				};
+				quartz_interrupt {
+					pins = "gpio47";
+					function = "gpio";
+					input;
+					bias-disable;
+				};
+				quartz_reset {
+					pins = "gpio21";
+					function = "gpio";
+					output-low;
+					bias-disable;
+				};
+			};
+		};
+
+		serial@78b3000 {
+			status = "ok";
+		};
+
+		dp1 {
+			device_type = "network";
+			compatible = "qcom,nss-dp";
+			qcom,id = <5>;
+			reg = <0x3a001800 0x200>;
+			qcom,mactype = <0>;
+			local-mac-address = [000000000000];
+			qcom,link-poll = <1>;
+			qcom,phy-mdio-addr = <24>;
+			phy-mode = "sgmii";
+		};
+
+		dp2 {
+			device_type = "network";
+			compatible = "qcom,nss-dp";
+			qcom,id = <6>;
+			reg = <0x3a001a00 0x200>;
+			qcom,mactype = <0>;
+			local-mac-address = [000000000000];
+			qcom,link-poll = <1>;
+			qcom,phy-mdio-addr = <28>;
+			phy-mode = "sgmii";
+		};
+
+		spi@78b5000 {
+			status = "ok";
+			pinctrl-0 = <&spi_0_pins>;
+			pinctrl-names = "default";
+			cs-select = <0>;
+
+			m25p80@0 {
+				  compatible = "n25q128a11";
+				  #address-cells = <1>;
+				  #size-cells = <1>;
+				  reg = <0>;
+				  spi-max-frequency = <50000000>;
+			};
+		};
+
+		spi@78b8000 {
+			status = "ok";
+			pinctrl-0 = <&spi_3_pins>;
+			pinctrl-names = "default";
+			cs-select = <2>;
+			quartz-reset-gpio = <&tlmm 21 1>;
+
+			spidev3: spi@3 {
+				  compatible = "qti,spidev";
+				  reg = <0>;
+				  spi-max-frequency = <24000000>;
+			};
+		};
+
+		dma@7984000 {
+			 status = "ok";
+		};
+
+		nand@79b0000 {
+			status = "ok";
+
+			nand@0 {
+				reg = <0>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				nand-ecc-strength = <4>;
+				nand-ecc-step-size = <512>;
+				nand-bus-width = <8>;
+			};
+		};
+
+		qusb@79000 {
+			status = "ok";
+		};
+
+		ssphy@78000 {
+			status = "ok";
+		};
+
+		usb3@8A00000 {
+			status = "ok";
+		};
+
+		qusb@59000 {
+			status = "ok";
+		};
+
+		ssphy@58000 {
+			status = "ok";
+		};
+
+		usb3@8C00000 {
+			status = "ok";
+		};
+
+		phy@84000 {
+			status = "ok";
+		};
+
+		phy@86000 {
+			status = "ok";
+		};
+
+		pci@20000000 {
+			perst-gpio = <&tlmm 58 1>;
+			status = "ok";
+		};
+
+		gpio_keys {
+			compatible = "gpio-keys";
+			pinctrl-0 = <&button_pins>;
+			pinctrl-names = "default";
+			status = "ok";
+
+			button@1 {
+				label = "reset";
+				linux,code = <KEY_RESTART>;
+				gpios = <&tlmm 57 GPIO_ACTIVE_LOW>;
+				linux,input-type = <1>;
+				debounce-interval = <60>;
+			};
+		};
+
+		leds {
+			compatible = "gpio-leds";
+			pinctrl-0 = <&led_pins>;
+			pinctrl-names = "default";
+
+			red {
+				label = "sys:red";
+				gpio = <&tlmm 0 GPIO_ACTIVE_HIGH>;
+				default-state = "off";
+			};
+
+			green {
+				label = "sys:green";
+				gpio = <&tlmm 2 GPIO_ACTIVE_HIGH>;
+				default-state = "off";
+			};
+
+			led_power: blue {
+				label = "sys:blue";
+				gpio = <&tlmm 9 GPIO_ACTIVE_HIGH>;
+				default-state = "off";
+			};
+		};
+
+		mdio: mdio@90000 {
+			pinctrl-0 = <&mdio_pins>;
+			pinctrl-names = "default";
+			phy-reset-gpio = <&tlmm 37 0 &tlmm 25 0 &tlmm 44 0>;
+			phy0: ethernet-phy@0 {
+				reg = <0>;
+			};
+			phy1: ethernet-phy@1 {
+				reg = <1>;
+			};
+			phy2: ethernet-phy@2 {
+				reg = <2>;
+			};
+			phy3: ethernet-phy@3 {
+				reg = <3>;
+			};
+			phy4: ethernet-phy@4 {
+				reg = <24>;
+			};
+			phy5: ethernet-phy@5 {
+				reg = <28>;
+			};
+		};
+
+		ess-switch@3a000000 {
+			switch_cpu_bmp = <0x1>;  /* cpu port bitmap */
+			switch_lan_bmp = <0x3e>; /* lan port bitmap */
+			switch_wan_bmp = <0x40>; /* wan port bitmap */
+			switch_mac_mode = <0x0>; /* mac mode for uniphy instance0*/
+			switch_mac_mode1 = <0xf>; /* mac mode for uniphy instance1*/
+			switch_mac_mode2 = <0xf>; /* mac mode for uniphy instance2*/
+			bm_tick_mode = <0>; /* bm tick mode */
+			tm_tick_mode = <0>; /* tm tick mode */
+			qcom,port_phyinfo {
+				port@0 {
+					port_id = <1>;
+					phy_address = <0>;
+				};
+				port@1 {
+					port_id = <2>;
+					phy_address = <1>;
+				};
+				port@2 {
+					port_id = <3>;
+					phy_address = <2>;
+				};
+				port@3 {
+					port_id = <4>;
+					phy_address = <3>;
+				};
+				port@4 {
+					port_id = <5>;
+					phy_address = <24>;
+					port_mac_sel = "QGMAC_PORT";
+				};
+				port@5 {
+					port_id = <6>;
+					phy_address = <28>;
+					port_mac_sel = "QGMAC_PORT";
+				};
+			};
+			port_scheduler_resource {
+				port@0 {
+					port_id = <0>;
+					ucast_queue = <0 143>;
+					mcast_queue = <256 271>;
+					l0sp = <0 35>;
+					l0cdrr = <0 47>;
+					l0edrr = <0 47>;
+					l1cdrr = <0 7>;
+					l1edrr = <0 7>;
+				};
+				port@1 {
+					port_id = <1>;
+					ucast_queue = <144 159>;
+					mcast_queue = <272 275>;
+					l0sp = <36 39>;
+					l0cdrr = <48 63>;
+					l0edrr = <48 63>;
+					l1cdrr = <8 11>;
+					l1edrr = <8 11>;
+				};
+				port@2 {
+					port_id = <2>;
+					ucast_queue = <160 175>;
+					mcast_queue = <276 279>;
+					l0sp = <40 43>;
+					l0cdrr = <64 79>;
+					l0edrr = <64 79>;
+					l1cdrr = <12 15>;
+					l1edrr = <12 15>;
+				};
+				port@3 {
+					port_id = <3>;
+					ucast_queue = <176 191>;
+					mcast_queue = <280 283>;
+					l0sp = <44 47>;
+					l0cdrr = <80 95>;
+					l0edrr = <80 95>;
+					l1cdrr = <16 19>;
+					l1edrr = <16 19>;
+				};
+				port@4 {
+					port_id = <4>;
+					ucast_queue = <192 207>;
+					mcast_queue = <284 287>;
+					l0sp = <48 51>;
+					l0cdrr = <96 111>;
+					l0edrr = <96 111>;
+					l1cdrr = <20 23>;
+					l1edrr = <20 23>;
+				};
+				port@5 {
+					port_id = <5>;
+					ucast_queue = <208 223>;
+					mcast_queue = <288 291>;
+					l0sp = <52 55>;
+					l0cdrr = <112 127>;
+					l0edrr = <112 127>;
+					l1cdrr = <24 27>;
+					l1edrr = <24 27>;
+				};
+				port@6 {
+					port_id = <6>;
+					ucast_queue = <224 239>;
+					mcast_queue = <292 295>;
+					l0sp = <56 59>;
+					l0cdrr = <128 143>;
+					l0edrr = <128 143>;
+					l1cdrr = <28 31>;
+					l1edrr = <28 31>;
+				};
+				port@7 {
+					port_id = <7>;
+					ucast_queue = <240 255>;
+					mcast_queue = <296 299>;
+					l0sp = <60 63>;
+					l0cdrr = <144 159>;
+					l0edrr = <144 159>;
+					l1cdrr = <32 35>;
+					l1edrr = <32 35>;
+				};
+			};
+			port_scheduler_config {
+				port@0 {
+					port_id = <0>;
+					l1scheduler {
+						group@0 {
+							sp = <0 1>; /*L0 SPs*/
+							/*cpri cdrr epri edrr*/
+							cfg = <0 0 0 0>;
+						};
+					};
+					l0scheduler {
+						group@0 {
+							/*unicast queues*/
+							ucast_queue = <0 4 8>;
+							/*multicast queues*/
+							mcast_queue = <256 260>;
+							/*sp cpri cdrr epri edrr*/
+							cfg = <0 0 0 0 0>;
+						};
+						group@1 {
+							ucast_queue = <1 5 9>;
+							mcast_queue = <257 261>;
+							cfg = <0 1 1 1 1>;
+						};
+						group@2 {
+							ucast_queue = <2 6 10>;
+							mcast_queue = <258 262>;
+							cfg = <0 2 2 2 2>;
+						};
+						group@3 {
+							ucast_queue = <3 7 11>;
+							mcast_queue = <259 263>;
+							cfg = <0 3 3 3 3>;
+						};
+					};
+				};
+				port@1 {
+					port_id = <1>;
+					l1scheduler {
+						group@0 {
+							sp = <36>;
+							cfg = <0 8 0 8>;
+						};
+						group@1 {
+							sp = <37>;
+							cfg = <1 9 1 9>;
+						};
+					};
+					l0scheduler {
+						group@0 {
+							ucast_queue = <144>;
+							ucast_loop_pri = <16>;
+							mcast_queue = <272>;
+							mcast_loop_pri = <4>;
+							cfg = <36 0 48 0 48>;
+						};
+					};
+				};
+				port@2 {
+					port_id = <2>;
+					l1scheduler {
+						group@0 {
+							sp = <40>;
+							cfg = <0 12 0 12>;
+						};
+						group@1 {
+							sp = <41>;
+							cfg = <1 13 1 13>;
+						};
+					};
+					l0scheduler {
+						group@0 {
+							ucast_queue = <160>;
+							ucast_loop_pri = <16>;
+							mcast_queue = <276>;
+							mcast_loop_pri = <4>;
+							cfg = <40 0 64 0 64>;
+						};
+					};
+				};
+				port@3 {
+					port_id = <3>;
+					l1scheduler {
+						group@0 {
+							sp = <44>;
+							cfg = <0 16 0 16>;
+						};
+						group@1 {
+							sp = <45>;
+							cfg = <1 17 1 17>;
+						};
+					};
+					l0scheduler {
+						group@0 {
+							ucast_queue = <176>;
+							ucast_loop_pri = <16>;
+							mcast_queue = <280>;
+							mcast_loop_pri = <4>;
+							cfg = <44 0 80 0 80>;
+						};
+					};
+				};
+				port@4 {
+					port_id = <4>;
+					l1scheduler {
+						group@0 {
+							sp = <48>;
+							cfg = <0 20 0 20>;
+						};
+						group@1 {
+							sp = <49>;
+							cfg = <1 21 1 21>;
+						};
+					};
+					l0scheduler {
+						group@0 {
+							ucast_queue = <192>;
+							ucast_loop_pri = <16>;
+							mcast_queue = <284>;
+							mcast_loop_pri = <4>;
+							cfg = <48 0 96 0 96>;
+						};
+					};
+				};
+				port@5 {
+					port_id = <5>;
+					l1scheduler {
+						group@0 {
+							sp = <52>;
+							cfg = <0 24 0 24>;
+						};
+						group@1 {
+							sp = <53>;
+							cfg = <1 25 1 25>;
+						};
+					};
+					l0scheduler {
+						group@0 {
+							ucast_queue = <208>;
+							ucast_loop_pri = <16>;
+							mcast_queue = <288>;
+							mcast_loop_pri = <4>;
+							cfg = <52 0 112 0 112>;
+						};
+					};
+				};
+				port@6 {
+					port_id = <6>;
+					l1scheduler {
+						group@0 {
+							sp = <56>;
+							cfg = <0 28 0 28>;
+						};
+						group@1 {
+							sp = <57>;
+							cfg = <1 29 1 29>;
+						};
+					};
+					l0scheduler {
+						group@0 {
+							ucast_queue = <224>;
+							ucast_loop_pri = <16>;
+							mcast_queue = <292>;
+							mcast_loop_pri = <4>;
+							cfg = <56 0 128 0 128>;
+						};
+					};
+				};
+				port@7 {
+					port_id = <7>;
+					l1scheduler {
+						group@0 {
+							sp = <60>;
+							cfg = <0 32 0 32>;
+						};
+						group@1 {
+							sp = <61>;
+							cfg = <1 33 1 33>;
+						};
+					};
+					l0scheduler {
+						group@0 {
+							ucast_queue = <240>;
+							ucast_loop_pri = <16>;
+							mcast_queue = <296>;
+							cfg = <60 0 144 0 144>;
+						};
+					};
+				};
+			};
+		};
+
+		nss-macsec0 {
+			compatible = "qcom,nss-macsec";
+			phy_addr = <0x18>;
+			phy_access_mode = <0>;
+			mdiobus = <&mdio>;
+		};
+		nss-macsec1 {
+			compatible = "qcom,nss-macsec";
+			phy_addr = <0x1c>;
+			phy_access_mode = <0>;
+			mdiobus = <&mdio>;
+		};
+	};
+};
+
+&wifi0 {
+	qcom,board_id = <0x90>;
+};
+
+&wifi1 {
+	qcom,board_id = <0x290>;
+};

feeds/ipq807x_v5.4/ipq807x/image/ipq807x.mk

@@ -57,6 +57,17 @@ define Device/edgecore_eap106
 endef
 #TARGET_DEVICES += edgecore_eap106
 
+define Device/sonicfi_rap650c
+  DEVICE_TITLE := SonicFi RAP650C
+  DEVICE_DTS := qcom-ipq807x-rap650c
+  DEVICE_DTS_CONFIG=config@hk09
+  SUPPORTED_DEVICES := sonicfi,rap650c
+  DEVICE_PACKAGES := ath11k-wifi-sonicfi-rap650c uboot-envtools
+  IMAGES := sysupgrade.tar nand-factory.bin nand-factory.ubi
+  IMAGE/nand-factory.ubi := append-ubi
+endef
+TARGET_DEVICES += sonicfi_rap650c
+
 define Device/tplink_ex227
   DEVICE_TITLE := TP-Link EX227
   DEVICE_DTS := qcom-ipq807x-ex227

feeds/ipq807x_v5.4/mac80211/patches/pending/a-001-fix-roaming-between-phys.patch

@@ -0,0 +1,116 @@
+Index: backports-20210222_001-5.4.164-b157d2276/drivers/net/wireless/ath/ath11k/peer.c
+===================================================================
+--- backports-20210222_001-5.4.164-b157d2276.orig/drivers/net/wireless/ath/ath11k/peer.c
++++ backports-20210222_001-5.4.164-b157d2276/drivers/net/wireless/ath/ath11k/peer.c
+@@ -789,8 +789,6 @@ int ath11k_peer_delete(struct ath11k *ar
+ #endif
+ 	lockdep_assert_held(&ar->conf_mutex);
+ 
+-	reinit_completion(&ar->peer_delete_done);
+-
+ 	ath11k_nss_peer_delete(ar->ab, vdev_id, addr);
+ #ifdef CCPTCFG_ATH11K_NSS_SUPPORTPTCFG_ATH11K_NSS_SUPPORT
+ 	mutex_lock(&ar->ab->base_ast_lock);
+@@ -799,33 +797,60 @@ int ath11k_peer_delete(struct ath11k *ar
+ 	spin_lock_bh(&ar->ab->base_lock);
+ 
+ 	peer = ath11k_peer_find_by_addr(ar->ab, addr);
+-	if (peer) {
++	/* Check if the found peer is what we want to remove.
++	 * While the sta is transitioning to another band we may
++	 * have 2 peer with the same addr assigned to different
++	 * vdev_id. Make sure we are deleting the correct peer.
++	 */
++	if (peer && peer->vdev_id == vdev_id)
++		ath11k_peer_rhash_delete(ar->ab, peer);
++
++	/* Fallback to peer list search if the correct peer can't be found.
++	 * Skip the deletion of the peer from the rhash since it has already
++	 * been deleted in peer add.
++	 */
++	if (!peer)
++		peer = ath11k_peer_find(ar->ab, vdev_id, addr);
++
++
++	if (!peer) {
++		spin_unlock_bh(&ar->ab->base_lock);
++		mutex_unlock(&ar->ab->tbl_mtx_lock);
+ #ifdef CPTCFG_ATH11K_NSS_SUPPORT
+-		peer->delete_in_progress = true;
+-		if (peer->self_ast_entry) {
+-			ath11k_peer_del_ast(ar, peer->self_ast_entry);
+-			peer->self_ast_entry = NULL;
+-		}
++		mutex_unlock(&ar->ab->base_ast_lock);
++#endif
++		ath11k_warn(ar->ab,
++			    "failed to find peer vdev_id %d addr %pM in delete\n",
++			    vdev_id, addr);
++		return -EINVAL;
++        }
++
++#ifdef CPTCFG_ATH11K_NSS_SUPPORT
++	peer->delete_in_progress = true;
++	if (peer->self_ast_entry) {
++		ath11k_peer_del_ast(ar, peer->self_ast_entry);
++		peer->self_ast_entry = NULL;
++	}
+ 
+-		list_for_each_entry_safe(ast_entry, tmp_ast,
+-					 &peer->ast_entry_list, ase_list)
+-			if ((ast_entry->type == ATH11K_AST_TYPE_WDS) ||
+-			    (ast_entry->type == ATH11K_AST_TYPE_MEC)) {
+-				if (!list_empty(&ast_entry->wmi_list)) {
+-					ath11k_dbg(ar->ab, ATH11K_DBG_MAC,
+-						   "%s deleting unprocessed ast entry %pM of peer %pM from wmi list\n",
+-						    __func__, ast_entry->addr, addr);
+-					list_del_init(&ast_entry->wmi_list);
+-				}
++	list_for_each_entry_safe(ast_entry, tmp_ast,
++				 &peer->ast_entry_list, ase_list)
++		if ((ast_entry->type == ATH11K_AST_TYPE_WDS) ||
++		    (ast_entry->type == ATH11K_AST_TYPE_MEC)) {
++			if (!list_empty(&ast_entry->wmi_list)) {
++				ath11k_dbg(ar->ab, ATH11K_DBG_MAC,
++					   "%s deleting unprocessed ast entry %pM of peer %pM from wmi list\n",
++					    __func__, ast_entry->addr, addr);
++				list_del_init(&ast_entry->wmi_list);
+ 			}
++		}
+ #endif
+-		ath11k_peer_rhash_delete(ar->ab, peer);
+-	}
+ 	spin_unlock_bh(&ar->ab->base_lock);
+ 	mutex_unlock(&ar->ab->tbl_mtx_lock);
+ #ifdef CPTCFG_ATH11K_NSS_SUPPORT
+ 	mutex_unlock(&ar->ab->base_ast_lock);
+ #endif
++	reinit_completion(&ar->peer_delete_done);
++
+ 	ret = ath11k_wmi_send_peer_delete_cmd(ar, addr, vdev_id);
+ 	if (ret) {
+ 		ath11k_warn(ar->ab,
+@@ -866,14 +891,20 @@ int ath11k_peer_create(struct ath11k *ar
+ 			    "failed to create peer due to insufficient peer entry resource in firmware\n");
+ 		return -ENOBUFS;
+ 	}
+-
++	mutex_lock(&ar->ab->tbl_mtx_lock);
+ 	spin_lock_bh(&ar->ab->base_lock);
+ 	peer = ath11k_peer_find_by_addr(ar->ab, param->peer_addr);
+ 	if (peer) {
+-		spin_unlock_bh(&ar->ab->base_lock);
+-		return -EINVAL;
++		if (peer->vdev_id == param->vdev_id) {
++			spin_unlock_bh(&ar->ab->base_lock);
++			mutex_unlock(&ar->ab->tbl_mtx_lock);
++			return -EINVAL;
++		}
++		ath11k_peer_rhash_delete(ar->ab, peer);
+ 	}
++
+ 	spin_unlock_bh(&ar->ab->base_lock);
++	mutex_unlock(&ar->ab->tbl_mtx_lock);
+ 
+ 	ret = ath11k_wmi_send_peer_create_cmd(ar, param);
+ 	if (ret) {

feeds/mediatek-sdk/mediatek/files-5.4/arch/arm64/boot/dts/mediatek/mt7981-emplus-wap588m.dts

@@ -0,0 +1,349 @@
+/dts-v1/;
+#include "mt7981.dtsi"
+/ {
+	model = "Emplus WAP588M";
+	compatible = "emplus,wap588m";
+	chosen {
+		bootargs = "console=ttyS0,115200n1 loglevel=8  \
+				earlycon=uart8250,mmio32,0x11002000";
+	};
+
+	memory {
+		reg = <0 0x40000000 0 0x10000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		reset {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&pio 1 GPIO_ACTIVE_LOW>;
+				};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		power {
+			label = "power";
+			gpios = <&pio 11 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "timer";
+			default-state = "on";
+
+		};
+		wifi2g {
+			label = "wifi2g";
+			gpios = <&pio 9 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "ra0";
+		};
+		wifi5g {
+			label = "wifi5g";
+			gpios = <&pio 12 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "rax0";
+		};
+		lan {
+			label = "lan";
+			gpios = <&pio 10 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "eth0";
+		};
+		wan {
+			label = "wan";
+			gpios = <&pio 13 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "eth1";
+		};
+	};
+
+	nmbm_spim_nand {
+		compatible = "generic,nmbm";
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		lower-mtd-device = <&spi_nand>;
+		forced-create;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "BL2";
+				reg = <0x00000 0x0100000>;
+				read-only;
+			};
+
+			partition@100000 {
+				label = "u-boot-env";
+				reg = <0x0100000 0x0080000>;
+			};
+
+			factory: partition@180000 {
+				label = "Factory";
+				reg = <0x180000 0x0200000>;
+			};
+
+			partition@380000 {
+				label = "FIP";
+				reg = <0x380000 0x0200000>;
+			};
+
+			partition@580000 {
+				label = "ubi"; //110MB
+				reg = <0x580000 0x3700000>;
+			};
+
+			partition@3C80000 {
+				label = "ubi_1"; //110MB
+				reg = <0x3C80000 0x3700000>;
+			};
+
+			partition@7380000 {
+				label = "cert"; //384KB
+				reg = <0x7380000 0x0060000>;
+			};
+
+			partition@73E0000 {
+				label = "userconfig"; //640KB
+				reg = <0x73E0000 0x00a0000>;
+			};
+
+			partition@7480000 {
+				label = "crashdump"; //384KB
+				reg = <0x7480000 0x0060000>;
+			};
+		};
+	};
+
+	sound_wm8960 {
+		compatible = "mediatek,mt79xx-wm8960-machine";
+		mediatek,platform = <&afe>;
+		audio-routing = "Headphone", "HP_L",
+				"Headphone", "HP_R",
+				"LINPUT1", "AMIC",
+				"RINPUT1", "AMIC";
+		mediatek,audio-codec = <&wm8960>;
+		status = "disabled";
+	};
+
+	sound_si3218x {
+		compatible = "mediatek,mt79xx-si3218x-machine";
+		mediatek,platform = <&afe>;
+		mediatek,ext-codec = <&proslic_spi>;
+		status = "disabled";
+	};
+};
+
+&afe {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcm_pins>;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c_pins>;
+	status = "disabled";
+
+	wm8960: wm8960@1a {
+		compatible = "wlf,wm8960";
+		reg = <0x1a>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
+
+&eth {
+        status = "okay";
+
+        gmac0: mac@0 {
+                compatible = "mediatek,eth-mac";
+                reg = <0>;
+                phy-mode = "sgmii";
+                phy-handle = <&phy1>;
+        };
+
+	gmac1: mac@1 {
+		compatible = "mediatek,eth-mac";
+		reg = <1>;
+		phy-mode = "gmii";
+		phy-handle = <&phy0>;
+	};
+
+        mdio: mdio-bus {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+		// MT7981 internal PHY
+		phy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-id03a2.9461";
+			reg = <0>;
+			phy-mode = "gmii";
+			nvmem-cells = <&phy_calibration>;
+			nvmem-cell-names = "phy-cal-data";
+		};
+
+
+		// RTL8211FS PHY
+		phy1: ethernet-phy@1 {
+			compatible = "ethernet-phy-id001c.c916";
+			reg = <1>;
+			reset-gpios = <&pio 39 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <120000>;
+			reset-deassert-us = <120000>;
+			phy-mode = "sgmii";
+		};
+    };
+};
+
+&hnat {
+	mtketh-wan = "eth1";
+	mtketh-lan = "eth0";
+	mtketh-max-gmac = <2>;
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_flash_pins>;
+	status = "okay";
+	spi_nand: spi_nand@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "spi-nand";
+		reg = <0>;
+		spi-max-frequency = <52000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+	};
+};
+
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spic_pins>;
+	status = "okay";
+
+	proslic_spi: proslic_spi@0 {
+		compatible = "silabs,proslic_spi";
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+		spi-cpha = <1>;
+		spi-cpol = <1>;
+		channel_count = <1>;
+		debug_level = <4>;       /* 1 = TRC, 2 = DBG, 4 = ERR */
+		reset_gpio = <&pio 15 0>;
+		ig,enable-spi = <1>;     /* 1: Enable, 0: Disable */
+	};
+};
+
+&wbsys {
+	mediatek,mtd-eeprom = <&factory 0x0000>;
+	status = "okay";
+	pinctrl-names = "dbdc";
+	pinctrl-0 = <&wf_dbdc_pins>;
+};
+
+&pio {
+
+	i2c_pins: i2c-pins-g0 {
+                mux {
+                        function = "i2c";
+                        groups = "i2c0_0";
+                };
+        };
+
+        pcm_pins: pcm-pins-g0 {
+                mux {
+                        function = "pcm";
+                        groups = "pcm";
+                };
+        };
+
+        pwm0_pin: pwm0-pin-g0 {
+                mux {
+                        function = "pwm";
+                        groups = "pwm0_0";
+                };
+        };
+
+        pwm1_pin: pwm1-pin-g0 {
+                mux {
+                        function = "pwm";
+                        groups = "pwm1_0";
+                };
+        };
+
+        pwm2_pin: pwm2-pin {
+                mux {
+                        function = "pwm";
+                        groups = "pwm2";
+                };
+        };
+
+	spi0_flash_pins: spi0-pins {
+		mux {
+			function = "spi";
+			groups = "spi0", "spi0_wp_hold";
+		};
+
+		conf-pu {
+			pins = "SPI0_CS", "SPI0_HOLD", "SPI0_WP";
+			drive-strength = <MTK_DRIVE_8mA>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_11>;
+		};
+
+		conf-pd {
+			pins = "SPI0_CLK", "SPI0_MOSI", "SPI0_MISO";
+			drive-strength = <MTK_DRIVE_8mA>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_11>;
+		};
+	};
+
+	spic_pins: spi1-pins {
+		mux {
+			function = "spi";
+			groups = "spi1_1";
+		};
+	};
+
+	uart1_pins: uart1-pins-g1 {
+                mux {
+                        function = "uart";
+                        groups = "uart1_1";
+                };
+        };
+
+	uart2_pins: uart2-pins-g1 {
+		mux {
+                        function = "uart";
+                        groups = "uart2_1";
+                };
+        };
+	wf_dbdc_pins: wf_dbdc-pins {
+		mux {
+			function = "eth";
+			groups = "wf0_mode1";
+		};
+		conf {
+			pins = "WF_HB1", "WF_HB2", "WF_HB3", "WF_HB4",
+			       "WF_HB0", "WF_HB0_B", "WF_HB5", "WF_HB6",
+			       "WF_HB7", "WF_HB8", "WF_HB9", "WF_HB10",
+			       "WF_TOP_CLK", "WF_TOP_DATA", "WF_XO_REQ",
+			       "WF_CBA_RESETB", "WF_DIG_RESETB";
+			drive-strength = <MTK_DRIVE_4mA>;
+		};
+	};
+};
+
+&xhci {
+	mediatek,u3p-dis-msk = <0x0>;
+	phys = <&u2port0 PHY_TYPE_USB2>,
+	       <&u3port0 PHY_TYPE_USB3>;
+	status = "disabled";
+};

feeds/mediatek-sdk/mediatek/files-5.4/arch/arm64/boot/dts/mediatek/mt7981b-sonicfi-rap630w-211g.dts

@@ -9,6 +9,11 @@
 / {
 	aliases {
 		serial0 = &uart0;
+
+		led-boot = &led_power;
+		led-failsafe = &led_power;
+		led-running = &led_power;
+		led-upgrade = &led_power;
 	};
 
 	chosen {
@@ -39,31 +44,22 @@
 	leds {
 		compatible = "gpio-leds";
 
-		led_blue {
+		led_power: led_blue {
 			label = "sys:blue";
 			gpios = <&pio 23 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "timer";
-			active-delay = <500>;
-			inactive-delay = <500>;
-			default-state="on";
+			default-state="off";
 		};
 
 		led_green {
 			label = "sys:green";
 			gpios = <&pio 24 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "timer";
-			active-delay = <500>;
-			inactive-delay = <500>;
-			default-state="on";
+			default-state="off";
 		};
 
 		led_red {
 			label = "sys:red";
 			gpios = <&pio 25 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "timer";
-			active-delay = <500>;
-			inactive-delay = <500>;
-			default-state="on";
+			default-state="off";
 		};
 	};
 };
@@ -113,7 +109,7 @@
 
 							port@0 {
 									reg = <0>;
-									label = "lan1";
+									label = "lan3";
 							};
 
 							port@1 {
@@ -123,7 +119,7 @@
 
 							port@2 {
 									reg = <2>;
-									label = "lan3";
+									label = "lan1";
 							};
 
 							port@6 {

feeds/mediatek-sdk/mediatek/image/mt7981.mk

@@ -307,3 +307,28 @@ define Device/senao_jeap6500
 endef
 TARGET_DEVICES += senao_jeap6500
 DEFAULT_DEVICE_VARS += FIT_KEY_DIR FIT_KEY_NAME
+
+define Device/emplus_wap588m
+   DEVICE_VENDOR := EMPLUS
+   DEVICE_MODEL := WAP588M
+   DEVICE_DTS := mt7981-emplus-wap588m
+   DEVICE_DTS_DIR := $(DTS_DIR)/mediatek
+   SUPPORTED_DEVICES := emplus,wap588m
+   DEVICE_PACKAGES := kmod-mt7981-firmware kmod-mt7915e uboot-envtools -procd-ujail
+   UBINIZE_OPTS := -E 5
+   BLOCKSIZE := 128k
+   PAGESIZE := 2048
+   IMAGE_SIZE := 65536k
+   KERNEL_IN_UBI := 1
+   FIT_KEY_DIR := $(DTS_DIR)/mediatek/keys/emplus_wap588m
+   FIT_KEY_NAME := fit_key
+   IMAGES += factory.bin
+   IMAGE/factory.bin := append-ubi | check-size $$$$(IMAGE_SIZE)
+   IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+   KERNEL = kernel-bin | lzma | \
+     fit-sign lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
+   KERNEL_INITRAMFS = kernel-bin | lzma | \
+     fit-sign lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd
+ endef
+ TARGET_DEVICES += emplus_wap588m
+ DEFAULT_DEVICE_VARS += FIT_KEY_DIR FIT_KEY_NAME

feeds/mediatek-sdk/mediatek/mt7981/base-files/etc/uci-defaults/30_uboot-envtools

@@ -18,6 +18,7 @@ case "$board" in
 edgecore,eap111|\
 edgecore,eap112|\
 senao,iap2300m|\
+emplus,wap588m|\
 senao,jeap6500)
 	ubootenv_add_uci_config "/dev/mtd2" "0x0" "0x20000" "0x20000"
 	;;

feeds/mediatek-sdk/mediatek/mt7981/base-files/lib/upgrade/platform.sh

@@ -2,13 +2,13 @@ REQUIRE_IMAGE_METADATA=1
 
 senao_swap_active_fw() {
 	echo "Doing swap active_fw" > /dev/console
-	tmp_active_fw=$(fw_printenv -n active_fw)
+        tmp_active_fw=$(fw_printenv | grep active_fw | awk -F= {'print $2'})
 	if [ $tmp_active_fw == "0" ]; then
 		fw_setenv active_fw 1
-		fw_setenv mtdparts nmbm0:1024k\(bl2\),512k\(u-boot-env\),2048k\(factory\),2048k\(fip\),112640k\(ubi_1\),112640k\(ubi\),384k\(cert\),640k\(userconfig\),384k\(crashdump\)
+                fw_setenv mtdparts nmbm0:1024k\(bl2\),512k\(u-boot-env\),2048k\(factory\),2048k\(fip\),56320k\(ubi_1\),56320k\(ubi\),384k\(cert\),640k\(userconfig\),384k\(crashdump\)
 	else
 		fw_setenv active_fw 0
-		fw_setenv mtdparts nmbm0:1024k\(bl2\),512k\(u-boot-env\),2048k\(factory\),2048k\(fip\),112640k\(ubi\),112640k\(ubi_1\),384k\(cert\),640k\(userconfig\),384k\(crashdump\)
+                fw_setenv mtdparts nmbm0:1024k\(bl2\),512k\(u-boot-env\),2048k\(factory\),2048k\(fip\),56320k\(ubi\),56320k\(ubi_1\),384k\(cert\),640k\(userconfig\),384k\(crashdump\)
 	fi
 }
 
@@ -47,6 +47,7 @@ platform_do_upgrade() {
 		nand_do_upgrade "$1"
 		;;
 	senao,iap2300m|\
+	emplus,wap588m|\
 	senao,jeap6500)
 		CI_UBIPART="ubi_1"
 		nand_do_upgrade "$1"
@@ -68,6 +69,7 @@ platform_check_image() {
 	edgecore,eap111|\
 	edgecore,eap112|\
 	senao,iap2300m|\
+	emplus,wap588m|\
 	senao,jeap6500)
 		nand_do_platform_check "$board" "$1"
 		return $?

feeds/qca-wifi-7/ath12k-firmware/Makefile

@@ -42,6 +42,15 @@ define Package/ath12k-firmware-ipq5332-peb/description
 Standard ath12k firmware for IPQ5332 + Pebble from QCA
 endef
 
+define Package/ath12k-firmware-ipq5332-peb-peb
+$(Package/ath12k-firmware-default)
+  TITLE:=ath12k firmware for IPQ5332 + Pebble + Pebble devices
+endef
+
+define Package/ath12k-firmware-ipq5332-peb-peb/description
+Standard ath12k firmware for IPQ5332 + Pebble + Pebble from QCA
+endef
+
 define Build/Compile
 
 endef
@@ -60,10 +69,23 @@ endef
 
 define Package/ath12k-firmware-ipq5332-peb/install
 	$(INSTALL_DIR) $(1)/lib/firmware/IPQ5332/
-	$(INSTALL_DATA) ./files/IPQ5332_peb/* \
+	$(INSTALL_DIR) $(1)/lib/firmware/qcn6432/
+	$(INSTALL_DATA) ./files/IPQ5332_peb/*.* \
 		$(1)/lib/firmware/IPQ5332/
+	$(INSTALL_DATA) ./files/IPQ5332_peb/qcn6432/* \
+		$(1)/lib/firmware/qcn6432/
+endef
+
+define Package/ath12k-firmware-ipq5332-peb-peb/install
+	$(INSTALL_DIR) $(1)/lib/firmware/IPQ5332/
+	$(INSTALL_DIR) $(1)/lib/firmware/qcn6432/
+	$(INSTALL_DATA) ./files/IPQ5332_peb_peb/*.* \
+		$(1)/lib/firmware/IPQ5332/
+	$(INSTALL_DATA) ./files/IPQ5332_peb_peb/qcn6432/* \
+		$(1)/lib/firmware/qcn6432/
 endef
 
 $(eval $(call BuildPackage,ath12k-firmware-qcn92xx))
 $(eval $(call BuildPackage,ath12k-firmware-ipq5332))
 $(eval $(call BuildPackage,ath12k-firmware-ipq5332-peb))
+$(eval $(call BuildPackage,ath12k-firmware-ipq5332-peb-peb))

feeds/qca-wifi-7/ath12k-firmware/files/IPQ5332_peb/qcn6432/fw_ini_cfg.bin

@@ -0,0 +1,16 @@
+//Number of VAPs
+{"Mode": 0,"num vap":17}    // Max VAP support is 17 per MAC
+{"Mode": 1,"num vap":17}    // Max VAP support is 17 per MAC
+{"Mode": 2,"num vap":17}    // Max VAP support is 17 per MAC
+
+//Number of clients
+{"Mode":0, "num clients":256}   // Max client support is 256 for both single MAC and dual MAC
+{"Mode":1, "num clients":256}   // Max client support is 256 per MAC
+{"Mode":2, "num clients":256}   // Max client support is 256 per MAC
+
+// Please do not reduce the default configuration while working in QWRAP Mode.
+
+//AFC Proxy ,Deployment type ,Power mode mask INI configuration
+{"afc_local_rsvd":0,"Deployment_Type":1,"Power_mode_mask":7}
+2<EFBFBD>=R<02>[I<>
+<EFBFBD>;<3B>b|G%<25><><19><05>ъ[<5B>nT

feeds/qca-wifi-7/ath12k-firmware/files/IPQ5332_peb/qcn6432/iu_fw.flist

@@ -0,0 +1,3 @@
+build/ms/bin/5332.wlan_fw2.mia_peb_eval/PIL_IMAGES/qcn6432/iu_fw.b00
+build/ms/bin/5332.wlan_fw2.mia_peb_eval/PIL_IMAGES/qcn6432/iu_fw.b01
+build/ms/bin/5332.wlan_fw2.mia_peb_eval/PIL_IMAGES/qcn6432/iu_fw.b02

feeds/qca-wifi-7/ath12k-firmware/files/IPQ5332_peb/qcn6432/qdss_trace_config.bin

@@ -0,0 +1,181 @@
+seq_start;
+seq_type:mem_req;
+sink:etr_ddr,0x1,0x400;
+seq_end;
+seq_start;
+seq_type:mac_event_trace;
+subsys_cfg_start:umac;
+cxc_eb0:0x2,0x42AAA8B3,0x64BFA3C0,0x00008000,0x0001C0FC;
+reo_eb0:0x4,0x61C81F4,0x0,0x0,0x0;
+tqm_eb0:0x5,0xCDB3C6C6,0x803007E0,0x0,0x0;
+tcl_eb0:0x6,0x25030034,0x3000,0x0,0x0;
+wbm_eb0:0x7,0x880004,0x380000,0x0,0x0;
+cxc_eb1:0x8,0x42AAA8B3,0x64BFA3C0,0x00008000,0x0001C0FC;
+tcl_eb1:0x9,0x25030034,0x3000,0x0,0x0;
+reo_eb1:0xA,0x61C81F4,0x0,0x0,0x0;
+tqm_eb1:0xB,0xCDB3C6C6,0x803007E0,0x0,0x0;
+wbm_eb1:0xC,0x880004,0x380000,0x0,0x0;
+mxi:0xD,0x122234,0x0,0x0,0x0;
+wsib:0xE,0x0,0x0,0x0,0x0;
+memw:0x0;
+subsys_cfg_end:umac;
+subsys_cfg_start:dmac;
+swevt:0x0,0xFFFFFFFF,0xFFFFFFFF,0x00000000,0x00000000;
+txdma_eb0:0x1,0x200,0x0,0x0,0x0;
+txdma_eb1:0x2,0xD9220,0xAF0,0x0,0x0;
+txdma_eb2:0x3,0xD9220,0xAF0,0x0,0x0;
+rxdma_eb0:0x4,0x93297E3F,0xC00000,0x0,0x0;
+rxdma_eb1:0x5,0x707F,0x0,0x0,0x0;
+txole_eb0:0x6,0xFFFFFFFF,0x0,0x0,0x0;
+txole_eb1:0x7,0x781F0734,0x6,0x0,0x0;
+txole_eb2:0x8,0x781F0734,0x6,0x0,0x0;
+rxole_eb0:0x9,0xF,0x0,0x0,0x0;
+rxole_eb1:0xA,0x7F,0x0,0x0,0x0;
+rxole_eb2:0xB,0x7F,0x0,0x0,0x0;
+crypto:0xC,0xFF3FFF,0x0,0x0,0x0;
+mxi:0xD,0x122234,0x0,0x0,0x0;
+sfm_eb0:0xE,0x40000003,0x7F8,0x0,0x0;
+rxmon_eb0:0x14,0x22800010,0x40A00,0x0,0x0;
+rxmon_eb1:0x15,0x18005000,0x18,0x0,0x0;
+txmon_eb0:0x12,0x22800010,0x40A00,0x0,0x0;
+txmon_eb1:0x13,0x98005000,0x199,0x0,0x0;
+memw:0x0;
+subsys_cfg_end:dmac;
+subsys_cfg_start:pmac0;
+swevt:0x0,0xFFFFFFFF,0xFFFFFFFF,0x00000000,0x00000000;
+hwsch:0x1,0x803FFFF7,0x30003,0x0,0x0;
+pdg:0x2,0xE430F87,0x622856E,0x0,0x0;
+txpcu_eb0:0x8,0xE87A047,0x132,0x0,0x0;
+rxpcu_eb0:0x9,0x10060217,0x1F24500,0x0,0x0;
+rri:0xa,0x0,0x0,0x0,0x0;
+ampi:0xb,0x69C07,0x0,0x0,0x0;
+mxi:0xd,0x122234,0x0,0x0,0x0;
+txpcu_eb1:0x10,0x0,0x0,0x0,0x0;
+sfm_eb1:0x12,0x40000003,0x7F8,0x0,0x0;
+rxpcu_eb1:0x13,0x0,0x0,0x0,0x0;
+hwmlo:0x1c,0x1C100004,0x7800,0x0,0x0;
+memw:0x0;
+subsys_cfg_end:pmac0;
+subsys_cfg_start:pmac1;
+swevt:0x0,0xFFFFFFFF,0xFFFFFFFF,0x00000000,0x00000000;
+hwsch:0x1,0x803FFFF7,0x30003,0x0,0x0;
+pdg:0x2,0xE430F87,0x622856E,0x0,0x0;
+txpcu_eb0:0x8,0xE87A047,0x132,0x0,0x0;
+rxpcu_eb0:0x9,0x10060217,0x1F24500,0x0,0x0;
+rri:0xa,0x0,0x0,0x0,0x0;
+ampi:0xb,0x69C07,0x0,0x0,0x0;
+mxi:0xd,0x122234,0x0,0x0,0x0;
+txpcu_eb1:0x10,0x0,0x0,0x0,0x0;
+sfm_eb1:0x12,0x40000003,0x7F8,0x0,0x0;
+rxpcu_eb1:0x13,0x0,0x0,0x0,0x0;
+hwmlo:0x1c,0x1C100004,0x7800,0x0,0x0;
+memw:0x0;
+subsys_cfg_end:pmac1;
+seq_end;
+seq_start;
+seq_type:phy_event_trace;
+subsys_cfg_start:phya0;
+data_tlv:0;
+wsi:0x0,0x00000000,0x00000000;
+rfcntl:0x0,0x00000000,0x00000000;
+tpc:0x0,0x00000000,0x00000000;
+cal:0x0,0x00000000,0x00000000;
+impcorr:0x0,0x00000000,0x00000000;
+mpi:0x6,0x00000006,0x00000000;
+fft:0x0,0x00000000,0x00000000;
+txtd:0x0,0x00000000,0x00000000;
+pmi:0x9,0x0000000A,0x00000000;
+rxtd:0xa,0x0000000A,0x00000000;
+demfront:0x0,0x00000000,0x00000000;
+pcss:0xc,0x0000003E,0x00000000;
+txfd:0x0,0x00000000,0x00000000;
+robe:0x0,0x00000000,0x00000000;
+dmac_0_1:0x0,0x00000000,0x00000000;
+dmac_2_3:0x0,0x00000000,0x00000000;
+dmac_4_5:0x0,0x00000000,0x00000000;
+dmac_6:0x0,0x00000000,0x00000000;
+eos:0x0,0x00000000,0x00000000;
+subsys_cfg_end:phya0;
+//subsys_cfg_start:phya1;
+//data_tlv:1;
+//wsi:0x0,0x00000000,0x00000000;
+//rfcntl:0x0,0x00000000,0x00000000;
+//tpc:0x0,0x00000000,0x00000000;
+//cal:0x0,0x00000000,0x00000000;
+//impcorr:0x0,0x00000000,0x00000000;
+//mpi:0x6,0x00000006,0x00000000;
+//fft:0x0,0x00000000,0x00000000;
+//txtd:0x0,0x00000000,0x00000000;
+//pmi:0x9,0x0000000A,0x00000000;
+//rxtd:0xa,0x0000000A,0x00000000;
+//demfront:0x0,0x00000000,0x00000000;
+//pcss:0xc,0x0000003E,0x00000000;
+//txfd:0x0,0x00000000,0x00000000;
+//robe:0x0,0x00000000,0x00000000;
+//dmac_0_1:0x0,0x00000000,0x00000000;
+//dmac_2_3:0x0,0x00000000,0x00000000;
+//dmac_4_5:0x0,0x00000000,0x00000000;
+//dmac_6:0x0,0x00000000,0x00000000;
+//eos:0x0,0x00000000,0x00000000;
+//subsys_cfg_end:phya1;
+seq_end;
+//seq_start;
+//seq_type:noc_trace;
+//noc_id:umacnoc;
+//syncoutperiod:0x1F;
+//probe_id:0x0;
+//probe_type:0x2;
+//probe_andinv:0x0;
+//probe_portsel:0x1;
+//filter0_path:0x0;
+//filter0_path_mask:0x0;
+//filter0_addr_min_lo:0x0;
+//filter0_addr_min_hi:0x0;
+//filter0_addr_max_lo:0xFFFFFFFF;
+//filter0_addr_max_hi:0xF;
+//filter0_opcode:0x3;
+//filter0_status:0x3;
+//filter0_trtype:0x0;
+//filter0_extid:0x0;
+//filter0_extid_mask:0x0;
+//filter1_path:0x0;
+//filter1_path_mask:0x0;
+//filter1_addr_min_lo:0x0;
+//filter1_addr_min_hi:0x0;
+//filter1_addr_max_lo:0xFFFFFFFF;
+//filter1_addr_max_hi:0xF;
+//filter1_opcode:0x3;
+//filter1_status:0x3;
+//filter1_trtype:0x0;
+//filter1_extid:0x0;
+//filter1_extid_mask:0x0;
+//seq_end;
+//seq_start;
+//seq_type:mac_tlv_trace;
+//subsys_cfg_start:pmac0;
+//tlv_port:tqm_hwsch_tlv;
+//tlv_config:tlv_type,other_tlv,specific_tlv,data_tlv;
+//tlv_config:1,3,3,3;
+//memw:0x2,0x10220A0,0xFFFFFDFF,0x10220B0,0x7FFFFFFF;
+//subsys_cfg_end:pmac0;
+//seq_end;
+//seq_start;
+//seq_start;
+//seq_type:mac_tlv_trace;
+//subsys_cfg_start:pmac1;
+//tlv_port:tqm_hwsch_tlv;
+//tlv_config:tlv_type,other_tlv,specific_tlv,data_tlv;
+//tlv_config:1,3,3,3;
+//memw:0x2,0x10220A0,0xFFFFFDFF,0x10220B0,0x7FFFFFFF;
+//subsys_cfg_end:pmac1;
+//seq_end;
+//seq_start;
+//seq_type:mac_obo_trace;
+//subsys_cfg_start:pmac0;
+//tbus_port:pdg_testbus, 0x7;
+//memw:0x0;
+//subsys_cfg_end:pmac0;
+//seq_end;
+//seq_start;
+//seq_type:irq_trace;
+//seq_end;

feeds/qca-wifi-7/ath12k-firmware/files/IPQ5332_peb_peb/iu_fw.flist

@@ -0,0 +1,3 @@
+build/ms/bin/5332.wlan_fw2.mia_peb_peb_eval_cs/PIL_IMAGES/iu_fw.b00
+build/ms/bin/5332.wlan_fw2.mia_peb_peb_eval_cs/PIL_IMAGES/iu_fw.b01
+build/ms/bin/5332.wlan_fw2.mia_peb_peb_eval_cs/PIL_IMAGES/iu_fw.b02

feeds/qca-wifi-7/ath12k-firmware/files/IPQ5332_peb_peb/q6_fw0.flist

@@ -0,0 +1,11 @@
+build/ms/bin/5332.wlan_fw2.mia_peb_peb_eval_cs/PIL_IMAGES/q6_fw0.b00
+build/ms/bin/5332.wlan_fw2.mia_peb_peb_eval_cs/PIL_IMAGES/q6_fw0.b01
+build/ms/bin/5332.wlan_fw2.mia_peb_peb_eval_cs/PIL_IMAGES/q6_fw0.b02
+build/ms/bin/5332.wlan_fw2.mia_peb_peb_eval_cs/PIL_IMAGES/q6_fw0.b03
+build/ms/bin/5332.wlan_fw2.mia_peb_peb_eval_cs/PIL_IMAGES/q6_fw0.b04
+build/ms/bin/5332.wlan_fw2.mia_peb_peb_eval_cs/PIL_IMAGES/q6_fw0.b05
+build/ms/bin/5332.wlan_fw2.mia_peb_peb_eval_cs/PIL_IMAGES/q6_fw0.b06
+build/ms/bin/5332.wlan_fw2.mia_peb_peb_eval_cs/PIL_IMAGES/q6_fw0.b07
+build/ms/bin/5332.wlan_fw2.mia_peb_peb_eval_cs/PIL_IMAGES/q6_fw0.b08
+build/ms/bin/5332.wlan_fw2.mia_peb_peb_eval_cs/PIL_IMAGES/q6_fw0.b09
+build/ms/bin/5332.wlan_fw2.mia_peb_peb_eval_cs/PIL_IMAGES/q6_fw0.b11

feeds/qca-wifi-7/ath12k-firmware/files/IPQ5332_peb_peb/q6_fw1.flist

@@ -0,0 +1,3 @@
+build/ms/bin/5332.wlan_fw2.mia_peb_peb_eval_cs/PIL_IMAGES/q6_fw1.b00
+build/ms/bin/5332.wlan_fw2.mia_peb_peb_eval_cs/PIL_IMAGES/q6_fw1.b01
+build/ms/bin/5332.wlan_fw2.mia_peb_peb_eval_cs/PIL_IMAGES/q6_fw1.b02

feeds/qca-wifi-7/ath12k-firmware/files/IPQ5332_peb_peb/q6_fw2.flist

@@ -0,0 +1,3 @@
+build/ms/bin/5332.wlan_fw2.mia_peb_peb_eval_cs/PIL_IMAGES/q6_fw2.b00
+build/ms/bin/5332.wlan_fw2.mia_peb_peb_eval_cs/PIL_IMAGES/q6_fw2.b01
+build/ms/bin/5332.wlan_fw2.mia_peb_peb_eval_cs/PIL_IMAGES/q6_fw2.b02

feeds/qca-wifi-7/ath12k-firmware/files/IPQ5332_peb_peb/q6_fw3.flist

@@ -0,0 +1,3 @@
+build/ms/bin/5332.wlan_fw2.mia_peb_peb_eval_cs/PIL_IMAGES/q6_fw3.b00
+build/ms/bin/5332.wlan_fw2.mia_peb_peb_eval_cs/PIL_IMAGES/q6_fw3.b01
+build/ms/bin/5332.wlan_fw2.mia_peb_peb_eval_cs/PIL_IMAGES/q6_fw3.b02

feeds/qca-wifi-7/ath12k-firmware/files/IPQ5332_peb_peb/q6_fw4.flist

@@ -0,0 +1,3 @@
+build/ms/bin/5332.wlan_fw2.mia_peb_peb_eval_cs/PIL_IMAGES/q6_fw4.b00
+build/ms/bin/5332.wlan_fw2.mia_peb_peb_eval_cs/PIL_IMAGES/q6_fw4.b01
+build/ms/bin/5332.wlan_fw2.mia_peb_peb_eval_cs/PIL_IMAGES/q6_fw4.b02

feeds/qca-wifi-7/ath12k-firmware/files/IPQ5332_peb_peb/qcn6432/fw_ini_cfg.bin

@@ -0,0 +1,16 @@
+//Number of VAPs
+{"Mode": 0,"num vap":17}    // Max VAP support is 17 per MAC
+{"Mode": 1,"num vap":17}    // Max VAP support is 17 per MAC
+{"Mode": 2,"num vap":17}    // Max VAP support is 17 per MAC
+
+//Number of clients
+{"Mode":0, "num clients":256}   // Max client support is 256 for both single MAC and dual MAC
+{"Mode":1, "num clients":256}   // Max client support is 256 per MAC
+{"Mode":2, "num clients":256}   // Max client support is 256 per MAC
+
+// Please do not reduce the default configuration while working in QWRAP Mode.
+
+//AFC Proxy ,Deployment type ,Power mode mask INI configuration
+{"afc_local_rsvd":0,"Deployment_Type":1,"Power_mode_mask":7}
+2<EFBFBD>=R<02>[I<>
+<EFBFBD>;<3B>b|G%<25><><19><05>ъ[<5B>nT

feeds/qca-wifi-7/ath12k-firmware/files/IPQ5332_peb_peb/qcn6432/iu_fw.flist

@@ -0,0 +1,3 @@
+build/ms/bin/5332.wlan_fw2.mia_peb_peb_eval_cs/PIL_IMAGES/qcn6432/iu_fw.b00
+build/ms/bin/5332.wlan_fw2.mia_peb_peb_eval_cs/PIL_IMAGES/qcn6432/iu_fw.b01
+build/ms/bin/5332.wlan_fw2.mia_peb_peb_eval_cs/PIL_IMAGES/qcn6432/iu_fw.b02

feeds/qca-wifi-7/ath12k-firmware/files/IPQ5332_peb_peb/qcn6432/qdss_trace_config.bin

@@ -0,0 +1,181 @@
+seq_start;
+seq_type:mem_req;
+sink:etr_ddr,0x1,0x400;
+seq_end;
+seq_start;
+seq_type:mac_event_trace;
+subsys_cfg_start:umac;
+cxc_eb0:0x2,0x42AAA8B3,0x64BFA3C0,0x00008000,0x0001C0FC;
+reo_eb0:0x4,0x61C81F4,0x0,0x0,0x0;
+tqm_eb0:0x5,0xCDB3C6C6,0x803007E0,0x0,0x0;
+tcl_eb0:0x6,0x25030034,0x3000,0x0,0x0;
+wbm_eb0:0x7,0x880004,0x380000,0x0,0x0;
+cxc_eb1:0x8,0x42AAA8B3,0x64BFA3C0,0x00008000,0x0001C0FC;
+tcl_eb1:0x9,0x25030034,0x3000,0x0,0x0;
+reo_eb1:0xA,0x61C81F4,0x0,0x0,0x0;
+tqm_eb1:0xB,0xCDB3C6C6,0x803007E0,0x0,0x0;
+wbm_eb1:0xC,0x880004,0x380000,0x0,0x0;
+mxi:0xD,0x122234,0x0,0x0,0x0;
+wsib:0xE,0x0,0x0,0x0,0x0;
+memw:0x0;
+subsys_cfg_end:umac;
+subsys_cfg_start:dmac;
+swevt:0x0,0xFFFFFFFF,0xFFFFFFFF,0x00000000,0x00000000;
+txdma_eb0:0x1,0x200,0x0,0x0,0x0;
+txdma_eb1:0x2,0xD9220,0xAF0,0x0,0x0;
+txdma_eb2:0x3,0xD9220,0xAF0,0x0,0x0;
+rxdma_eb0:0x4,0x93297E3F,0xC00000,0x0,0x0;
+rxdma_eb1:0x5,0x707F,0x0,0x0,0x0;
+txole_eb0:0x6,0xFFFFFFFF,0x0,0x0,0x0;
+txole_eb1:0x7,0x781F0734,0x6,0x0,0x0;
+txole_eb2:0x8,0x781F0734,0x6,0x0,0x0;
+rxole_eb0:0x9,0xF,0x0,0x0,0x0;
+rxole_eb1:0xA,0x7F,0x0,0x0,0x0;
+rxole_eb2:0xB,0x7F,0x0,0x0,0x0;
+crypto:0xC,0xFF3FFF,0x0,0x0,0x0;
+mxi:0xD,0x122234,0x0,0x0,0x0;
+sfm_eb0:0xE,0x40000003,0x7F8,0x0,0x0;
+rxmon_eb0:0x14,0x22800010,0x40A00,0x0,0x0;
+rxmon_eb1:0x15,0x18005000,0x18,0x0,0x0;
+txmon_eb0:0x12,0x22800010,0x40A00,0x0,0x0;
+txmon_eb1:0x13,0x98005000,0x199,0x0,0x0;
+memw:0x0;
+subsys_cfg_end:dmac;
+subsys_cfg_start:pmac0;
+swevt:0x0,0xFFFFFFFF,0xFFFFFFFF,0x00000000,0x00000000;
+hwsch:0x1,0x803FFFF7,0x30003,0x0,0x0;
+pdg:0x2,0xE430F87,0x622856E,0x0,0x0;
+txpcu_eb0:0x8,0xE87A047,0x132,0x0,0x0;
+rxpcu_eb0:0x9,0x10060217,0x1F24500,0x0,0x0;
+rri:0xa,0x0,0x0,0x0,0x0;
+ampi:0xb,0x69C07,0x0,0x0,0x0;
+mxi:0xd,0x122234,0x0,0x0,0x0;
+txpcu_eb1:0x10,0x0,0x0,0x0,0x0;
+sfm_eb1:0x12,0x40000003,0x7F8,0x0,0x0;
+rxpcu_eb1:0x13,0x0,0x0,0x0,0x0;
+hwmlo:0x1c,0x1C100004,0x7800,0x0,0x0;
+memw:0x0;
+subsys_cfg_end:pmac0;
+subsys_cfg_start:pmac1;
+swevt:0x0,0xFFFFFFFF,0xFFFFFFFF,0x00000000,0x00000000;
+hwsch:0x1,0x803FFFF7,0x30003,0x0,0x0;
+pdg:0x2,0xE430F87,0x622856E,0x0,0x0;
+txpcu_eb0:0x8,0xE87A047,0x132,0x0,0x0;
+rxpcu_eb0:0x9,0x10060217,0x1F24500,0x0,0x0;
+rri:0xa,0x0,0x0,0x0,0x0;
+ampi:0xb,0x69C07,0x0,0x0,0x0;
+mxi:0xd,0x122234,0x0,0x0,0x0;
+txpcu_eb1:0x10,0x0,0x0,0x0,0x0;
+sfm_eb1:0x12,0x40000003,0x7F8,0x0,0x0;
+rxpcu_eb1:0x13,0x0,0x0,0x0,0x0;
+hwmlo:0x1c,0x1C100004,0x7800,0x0,0x0;
+memw:0x0;
+subsys_cfg_end:pmac1;
+seq_end;
+seq_start;
+seq_type:phy_event_trace;
+subsys_cfg_start:phya0;
+data_tlv:0;
+wsi:0x0,0x00000000,0x00000000;
+rfcntl:0x0,0x00000000,0x00000000;
+tpc:0x0,0x00000000,0x00000000;
+cal:0x0,0x00000000,0x00000000;
+impcorr:0x0,0x00000000,0x00000000;
+mpi:0x6,0x00000006,0x00000000;
+fft:0x0,0x00000000,0x00000000;
+txtd:0x0,0x00000000,0x00000000;
+pmi:0x9,0x0000000A,0x00000000;
+rxtd:0xa,0x0000000A,0x00000000;
+demfront:0x0,0x00000000,0x00000000;
+pcss:0xc,0x0000003E,0x00000000;
+txfd:0x0,0x00000000,0x00000000;
+robe:0x0,0x00000000,0x00000000;
+dmac_0_1:0x0,0x00000000,0x00000000;
+dmac_2_3:0x0,0x00000000,0x00000000;
+dmac_4_5:0x0,0x00000000,0x00000000;
+dmac_6:0x0,0x00000000,0x00000000;
+eos:0x0,0x00000000,0x00000000;
+subsys_cfg_end:phya0;
+//subsys_cfg_start:phya1;
+//data_tlv:1;
+//wsi:0x0,0x00000000,0x00000000;
+//rfcntl:0x0,0x00000000,0x00000000;
+//tpc:0x0,0x00000000,0x00000000;
+//cal:0x0,0x00000000,0x00000000;
+//impcorr:0x0,0x00000000,0x00000000;
+//mpi:0x6,0x00000006,0x00000000;
+//fft:0x0,0x00000000,0x00000000;
+//txtd:0x0,0x00000000,0x00000000;
+//pmi:0x9,0x0000000A,0x00000000;
+//rxtd:0xa,0x0000000A,0x00000000;
+//demfront:0x0,0x00000000,0x00000000;
+//pcss:0xc,0x0000003E,0x00000000;
+//txfd:0x0,0x00000000,0x00000000;
+//robe:0x0,0x00000000,0x00000000;
+//dmac_0_1:0x0,0x00000000,0x00000000;
+//dmac_2_3:0x0,0x00000000,0x00000000;
+//dmac_4_5:0x0,0x00000000,0x00000000;
+//dmac_6:0x0,0x00000000,0x00000000;
+//eos:0x0,0x00000000,0x00000000;
+//subsys_cfg_end:phya1;
+seq_end;
+//seq_start;
+//seq_type:noc_trace;
+//noc_id:umacnoc;
+//syncoutperiod:0x1F;
+//probe_id:0x0;
+//probe_type:0x2;
+//probe_andinv:0x0;
+//probe_portsel:0x1;
+//filter0_path:0x0;
+//filter0_path_mask:0x0;
+//filter0_addr_min_lo:0x0;
+//filter0_addr_min_hi:0x0;
+//filter0_addr_max_lo:0xFFFFFFFF;
+//filter0_addr_max_hi:0xF;
+//filter0_opcode:0x3;
+//filter0_status:0x3;
+//filter0_trtype:0x0;
+//filter0_extid:0x0;
+//filter0_extid_mask:0x0;
+//filter1_path:0x0;
+//filter1_path_mask:0x0;
+//filter1_addr_min_lo:0x0;
+//filter1_addr_min_hi:0x0;
+//filter1_addr_max_lo:0xFFFFFFFF;
+//filter1_addr_max_hi:0xF;
+//filter1_opcode:0x3;
+//filter1_status:0x3;
+//filter1_trtype:0x0;
+//filter1_extid:0x0;
+//filter1_extid_mask:0x0;
+//seq_end;
+//seq_start;
+//seq_type:mac_tlv_trace;
+//subsys_cfg_start:pmac0;
+//tlv_port:tqm_hwsch_tlv;
+//tlv_config:tlv_type,other_tlv,specific_tlv,data_tlv;
+//tlv_config:1,3,3,3;
+//memw:0x2,0x10220A0,0xFFFFFDFF,0x10220B0,0x7FFFFFFF;
+//subsys_cfg_end:pmac0;
+//seq_end;
+//seq_start;
+//seq_start;
+//seq_type:mac_tlv_trace;
+//subsys_cfg_start:pmac1;
+//tlv_port:tqm_hwsch_tlv;
+//tlv_config:tlv_type,other_tlv,specific_tlv,data_tlv;
+//tlv_config:1,3,3,3;
+//memw:0x2,0x10220A0,0xFFFFFDFF,0x10220B0,0x7FFFFFFF;
+//subsys_cfg_end:pmac1;
+//seq_end;
+//seq_start;
+//seq_type:mac_obo_trace;
+//subsys_cfg_start:pmac0;
+//tbus_port:pdg_testbus, 0x7;
+//memw:0x0;
+//subsys_cfg_end:pmac0;
+//seq_end;
+//seq_start;
+//seq_type:irq_trace;
+//seq_end;

feeds/qca-wifi-7/ath12k-firmware/files/IPQ5332_peb_peb/qdss_trace_config.bin

@@ -0,0 +1,133 @@
+seq_start;
+seq_type:mem_req;
+sink:etr_ddr,0x1,0x400;
+seq_end;
+seq_start;
+seq_type:mac_event_trace;
+subsys_cfg_start:umac;
+cxc_eb0:0x2,0x42AAA8B3,0x64BFA3C0,0x00008000,0x0001C0FC;
+reo_eb0:0x4,0x61C81F4,0x0,0x0,0x0;
+tqm_eb0:0x5,0xCDB3C6C6,0x803007E0,0x0,0x0;
+tcl_eb0:0x6,0x25030034,0x3000,0x0,0x0;
+wbm_eb0:0x7,0x880004,0x380000,0x0,0x0;
+cxc_eb1:0x8,0x42AAA8B3,0x64BFA3C0,0x00008000,0x0001C0FC;
+tcl_eb1:0x9,0x25030034,0x3000,0x0,0x0;
+reo_eb1:0xA,0x61C81F4,0x0,0x0,0x0;
+tqm_eb1:0xB,0xCDB3C6C6,0x803007E0,0x0,0x0;
+wbm_eb1:0xC,0x880004,0x380000,0x0,0x0;
+wsib:0xE,0x0,0x0,0x0,0x0;
+memw:0x0;
+subsys_cfg_end:umac;
+subsys_cfg_start:dmac;
+swevt:0x0,0xFFFFFFFF,0xFFFFFFFF,0x00000000,0x00000000;
+txdma_eb0:0x1,0x0,0x0,0x0,0x0;
+txdma_eb1:0x2,0x286C0,0x83C304,0x0,0x0;
+txdma_eb2:0x3,0x286C0,0x83C304,0x0,0x0;
+rxdma_eb0:0x4,0x93297E3F,0xC00000,0x0,0x0;
+rxdma_eb1:0x5,0x707F,0x0,0x0,0x0;
+txole_eb0:0x6,0xFFFFFFFF,0x0,0x0,0x0;
+txole_eb1:0x7,0x781F0734,0x6,0x0,0x0;
+txole_eb2:0x8,0x781F0734,0x6,0x0,0x0;
+rxole_eb0:0x9,0xF,0x0,0x0,0x0;
+rxole_eb1:0xA,0x7F,0x0,0x0,0x0;
+rxole_eb2:0xB,0x7F,0x0,0x0,0x0;
+crypto:0xC,0xFF3FFF,0x0,0x0,0x0;
+mxi:0xD,0x122234,0x0,0x0,0x0;
+sfm_eb0:0xE,0x40000003,0x7F8,0x0,0x0;
+rxmon_eb0:0x14,0x0,0x0,0x0,0x0;
+rxmon_eb1:0x15,0x0,0x0,0x0,0x0;
+txmon_eb0:0x12,0x0,0x0,0x0,0x0;
+txmon_eb1:0x13,0x0,0x0,0x0,0x0;
+memw:0x0;
+subsys_cfg_end:dmac;
+subsys_cfg_start:pmac0;
+swevt:0x0,0xFFFFFFFF,0xFFFFFFFF,0x00000000,0x00000000;
+hwsch:0x1,0x3FFFF7,0x30000,0x0,0x0;
+pdg:0x2,0xE430F87,0x622856E,0x0,0x0;
+txpcu_eb0:0x8,0xE87A047,0x112,0x0,0x0;
+rxpcu_eb0:0x9,0x10060217,0x1824500,0x0,0x0;
+rri:0xa,0x0,0x0,0x0,0x0;
+ampi:0xb,0x69C07,0x0,0x0,0x0;
+mxi:0xd,0x122234,0x0,0x0,0x0;
+txpcu_eb1:0x10,0x0,0x0,0x0,0x0;
+sfm_eb1:0x12,0x40000003,0x7F8,0x0,0x0;
+rxpcu_eb1:0x13,0x0,0x0,0x0,0x0;
+hwmlo:0x1c,0x1C100004,0x0,0x0,0x0;
+memw:0x0;
+subsys_cfg_end:pmac0;
+seq_end;
+seq_start;
+seq_type:phy_event_trace;
+subsys_cfg_start:phya0;
+data_tlv:0;
+wsi:0x0,0x00000000,0x00000000;
+rfcntl:0x0,0x00000000,0x00000000;
+tpc:0x0,0x00000000,0x00000000;
+cal:0x0,0x00000000,0x00000000;
+impcorr:0x0,0x00000000,0x00000000;
+mpi:0x6,0x00000006,0x00000000;
+fft:0x0,0x00000000,0x00000000;
+txtd:0x0,0x00000000,0x00000000;
+pmi:0x9,0x0000000A,0x00000000;
+rxtd:0xa,0x0000000A,0x00000000;
+demfront:0x0,0x00000000,0x00000000;
+pcss:0xc,0x0000003E,0x00000000;
+txfd:0x0,0x00000000,0x00000000;
+robe:0x0,0x00000000,0x00000000;
+dmac_0_1:0x0,0x00000000,0x00000000;
+dmac_2_3:0x0,0x00000000,0x00000000;
+dmac_4_5:0x0,0x00000000,0x00000000;
+dmac_6:0x0,0x00000000,0x00000000;
+eos:0x0,0x00000000,0x00000000;
+subsys_cfg_end:phya0;
+seq_end;
+//seq_start;
+//seq_type:noc_trace;
+//noc_id:umacnoc;
+//syncoutperiod:0x1F;
+//probe_id:0x0;
+//probe_type:0x2;
+//probe_andinv:0x0;
+//probe_portsel:0x1;
+//filter0_path:0x0;
+//filter0_path_mask:0x0;
+//filter0_addr_min_lo:0x0;
+//filter0_addr_min_hi:0x0;
+//filter0_addr_max_lo:0xFFFFFFFF;
+//filter0_addr_max_hi:0xF;
+//filter0_opcode:0x3;
+//filter0_status:0x3;
+//filter0_trtype:0x0;
+//filter0_extid:0x0;
+//filter0_extid_mask:0x0;
+//filter1_path:0x0;
+//filter1_path_mask:0x0;
+//filter1_addr_min_lo:0x0;
+//filter1_addr_min_hi:0x0;
+//filter1_addr_max_lo:0xFFFFFFFF;
+//filter1_addr_max_hi:0xF;
+//filter1_opcode:0x3;
+//filter1_status:0x3;
+//filter1_trtype:0x0;
+//filter1_extid:0x0;
+//filter1_extid_mask:0x0;
+//seq_end;
+//seq_start;
+//seq_type:mac_tlv_trace;
+//subsys_cfg_start:pmac0;
+//tlv_port:txpcu_ampi_tlv;
+//tlv_config:tlv_type,other_tlv,specific_tlv,data_tlv;
+//tlv_config:1,3,3,3;
+//memw:0x0;
+//subsys_cfg_end:pmac0;
+//seq_end;
+//seq_start;
+//seq_type:mac_obo_trace;
+//subsys_cfg_start:pmac0;
+//tbus_port:pdg_testbus, 0x7;
+//memw:0x0;
+//subsys_cfg_end:pmac0;
+//seq_end;
+//seq_start;
+//seq_type:irq_trace;
+//seq_end;

feeds/qca-wifi-7/ath12k-wifi/Makefile

@@ -53,6 +53,27 @@ $(call Package/ath12k-wifi-default)
     TITLE:=board-2.bin for RAP750W_311a
 endef
 
+define Package/ath12k-wifi-cig-wf189h
+$(call Package/ath12k-wifi-default)
+    TITLE:=board-2.bin for WF189H
+endef
+
+define Package/ath12k-wifi-cig-wf189w
+$(call Package/ath12k-wifi-default)
+    TITLE:=board-2.bin for WF189W
+endef
+
+define Package/ath12k-wifi-sercomm-ap72tip
+$(call Package/ath12k-wifi-default)
+    TITLE:=board-2.bin for AP72TIP
+endef
+
+define Package/ath12k-wifi-sercomm-ap72tip-v4
+$(call Package/ath12k-wifi-default)
+    TITLE:=board-2.bin for AP72TIP-v4
+endef
+
+
 define Package/ath12k-wifi-cig-wf189/install
 	$(INSTALL_DIR) $(1)/lib/firmware/ath12k/QCN92XX/hw1.0/
 	$(INSTALL_DIR) $(1)/lib/firmware/ath12k/IPQ5332/hw1.0/
@@ -76,10 +97,49 @@ endef
 
 define Package/ath12k-wifi-sonicfi-rap750w-311a/install
 	$(INSTALL_DIR) $(1)/lib/firmware/ath12k/IPQ5332/hw1.0/
-	$(INSTALL_DATA) ./ board-2.bin.rap750w_311a.IPQ5332$(1)/lib/firmware/ath12k/IPQ5332/hw1.0/board-2.bin
+	$(INSTALL_DIR) $(1)/lib/firmware/ath12k/QCN6432/hw1.0/
+	$(INSTALL_DATA) ./board-2.bin.rap750w_311a.IPQ5332 $(1)/lib/firmware/ath12k/IPQ5332/hw1.0/board-2.bin
+	$(INSTALL_DATA) ./board-2.bin.rap750w_311a.QCN6432 $(1)/lib/firmware/ath12k/QCN6432/hw1.0/board-2.bin
+#	$(INSTALL_DATA) ./ipq5332_qcn6432.regdb $(1)/lib/firmware/ath12k/IPQ5332/hw1.0/regdb.bin
+	$(INSTALL_DATA) ./ipq5332_qcn6432.regdb $(1)/lib/firmware/ath12k/QCN6432/hw1.0/regdb.bin
+endef
+
+define Package/ath12k-wifi-cig-wf189w/install
+	$(INSTALL_DIR) $(1)/lib/firmware/ath12k/IPQ5332/hw1.0/
+	$(INSTALL_DIR) $(1)/lib/firmware/ath12k/QCN6432/hw1.0/
+	$(INSTALL_DATA) ./board-2.bin.189w.IPQ5332 $(1)/lib/firmware/ath12k/IPQ5332/hw1.0/board-2.bin
+	$(INSTALL_DATA) ./board-2.bin.189w.QCN6432 $(1)/lib/firmware/ath12k/QCN6432/hw1.0/board-2.bin
+	$(INSTALL_DATA) ./ipq5332_qcn6432.regdb $(1)/lib/firmware/ath12k/QCN6432/hw1.0/regdb.bin
+endef
+
+
+define Package/ath12k-wifi-cig-wf189h/install
+	$(INSTALL_DIR) $(1)/lib/firmware/ath12k/IPQ5332/hw1.0/
+	$(INSTALL_DIR) $(1)/lib/firmware/ath12k/QCN6432/hw1.0/
+	$(INSTALL_DATA) ./board-2.bin.189h.IPQ5332 $(1)/lib/firmware/ath12k/IPQ5332/hw1.0/board-2.bin
+	$(INSTALL_DATA) ./board-2.bin.189h.QCN6432 $(1)/lib/firmware/ath12k/QCN6432/hw1.0/board-2.bin
+	$(INSTALL_DATA) ./ipq5332_qcn6432.regdb $(1)/lib/firmware/ath12k/QCN6432/hw1.0/regdb.bin
+endef
+
+define Package/ath12k-wifi-sercomm-ap72tip/install
+	$(INSTALL_DIR) $(1)/lib/firmware/ath12k/QCN92XX/hw1.0/
+	$(INSTALL_DIR) $(1)/lib/firmware/ath12k/IPQ5332/hw1.0/
+	$(INSTALL_DATA) ./board-2.bin.ap72tip.QCN92XX $(1)/lib/firmware/ath12k/QCN92XX/hw1.0/board-2.bin
+	$(INSTALL_DATA) ./board-2.bin.ap72tip.IPQ5332 $(1)/lib/firmware/ath12k/IPQ5332/hw1.0/board-2.bin
+endef
+
+define Package/ath12k-wifi-sercomm-ap72tip-v4/install
+	$(INSTALL_DIR) $(1)/lib/firmware/ath12k/QCN92XX/hw1.0/
+	$(INSTALL_DIR) $(1)/lib/firmware/ath12k/IPQ5332/hw1.0/
+	$(INSTALL_DATA) ./board-2.bin.ap72tip-v4.QCN92XX $(1)/lib/firmware/ath12k/QCN92XX/hw1.0/board-2.bin
+	$(INSTALL_DATA) ./board-2.bin.ap72tip-v4.IPQ5332 $(1)/lib/firmware/ath12k/IPQ5332/hw1.0/board-2.bin
 endef
 
 $(eval $(call BuildPackage,ath12k-wifi-cig-wf189))
 $(eval $(call BuildPackage,ath12k-wifi-edgecore-eap105))
 $(eval $(call BuildPackage,ath12k-wifi-sonicfi-rap7110c-341x))
 $(eval $(call BuildPackage,ath12k-wifi-sonicfi-rap750w-311a))
+$(eval $(call BuildPackage,ath12k-wifi-cig-wf189w))
+$(eval $(call BuildPackage,ath12k-wifi-cig-wf189h))
+$(eval $(call BuildPackage,ath12k-wifi-sercomm-ap72tip))
+$(eval $(call BuildPackage,ath12k-wifi-sercomm-ap72tip-v4))

feeds/qca-wifi-7/ath12k-wifi/board-2-ap72tip-IPQ5332.json

@@ -0,0 +1,20 @@
+[
+    {
+        "board": [
+            {
+                "names": [
+                    "bus=ahb,qmi-chip-id=0,qmi-board-id=255"
+                ],
+                "data": "ap72tip-IPQ5332.bin"
+            }
+        ],
+        "regdb": [
+            {
+                "names": [
+                    "bus=ahb,qmi-chip-id=0,qmi-board-id=255"
+                ],
+                "data": "ipq5332.regdb"
+            }
+        ]
+    }
+]

feeds/qca-wifi-7/ath12k-wifi/board-2-ap72tip-QCN92XX.json

@@ -0,0 +1,20 @@
+[
+    {
+        "board": [
+            {
+                "names": [
+                    "bus=pci,qmi-chip-id=0,qmi-board-id=255"
+                ],
+                "data": "ap72tip-QCN92XX.bin"
+            }
+        ],
+        "regdb": [
+            {
+                "names": [
+                    "bus=pci,qmi-chip-id=0,qmi-board-id=255"
+                ],
+                "data": "qcn92xx.regdb"
+            }
+        ]
+    }
+]

feeds/qca-wifi-7/ath12k-wifi/board-2-ap72tip-v4-IPQ5332.json

@@ -0,0 +1,20 @@
+[
+    {
+        "board": [
+            {
+                "names": [
+                    "bus=ahb,qmi-chip-id=0,qmi-board-id=255"
+                ],
+                "data": "ap72tip-v4-IPQ5332.bin"
+            }
+        ],
+        "regdb": [
+            {
+                "names": [
+                    "bus=ahb,qmi-chip-id=0,qmi-board-id=255"
+                ],
+                "data": "ipq5332.regdb"
+            }
+        ]
+    }
+]

feeds/qca-wifi-7/ath12k-wifi/board-2-ap72tip-v4-QCN92XX.json

@@ -0,0 +1,20 @@
+[
+    {
+        "board": [
+            {
+                "names": [
+                    "bus=pci,qmi-chip-id=0,qmi-board-id=255"
+                ],
+                "data": "ap72tip-v4-QCN92XX.bin"
+            }
+        ],
+        "regdb": [
+            {
+                "names": [
+                    "bus=pci,qmi-chip-id=0,qmi-board-id=255"
+                ],
+                "data": "qcn92xx.regdb"
+            }
+        ]
+    }
+]

feeds/qca-wifi-7/ath12k-wifi/generate.sh

@@ -9,3 +9,9 @@ $encoder -c board-2-eap105-QCN92XX.json -o board-2.bin.eap105.QCN92XX
 
 $encoder -c board-2-rap7110c_341x-IPQ5332.json -o board-2.bin.rap7110c_341x.IPQ5332
 $encoder -c board-2-rap7110c_341x-QCN92XX.json -o board-2.bin.rap7110c_341x.QCN92XX
+
+$encoder -c board-2-ap72tip-IPQ5332.json -o board-2.bin.ap72tip.IPQ5332
+$encoder -c board-2-ap72tip-QCN92XX.json -o board-2.bin.ap72tip.QCN92XX
+
+$encoder -c board-2-ap72tip-v4-IPQ5332.json -o board-2.bin.ap72tip-v4.IPQ5332
+$encoder -c board-2-ap72tip-v4-QCN92XX.json -o board-2.bin.ap72tip-v4.QCN92XX