mirror of
https://github.com/Telecominfraproject/wlan-ap.git
synced 2025-10-30 01:52:51 +00:00
7d336070d7
Hardware:
* SoC: Qcom IPQ5018
* RAM: DDR3L 512MB
* Flash: 128MB Nand
* Ethernet: 3x GbE
* WLAN: 2x2 2.4GHz 574Mbps + 2x2 5GHz 2402Mbps (builtin + builtin)
* LEDS: 1x white, 1x blue
* Buttons: 1x reset
* Power: 12VDC, 1.5A
Installation:
* from qsdk to openwifi:
upgrade "openwrt-ipq50xx-glinet_b3000-squashfs-nand-factory.bin" via web ui without keep config.
* upgrade "openwrt-ipq50xx-glinet_b3000-squashfs-sysupgrade.tar" if you are already in openwifi.
Signed-off-by: Yin Ni <yin.ni@gl-inet.com>
OpenWiFi AP NOS
OpenWrt-based access point network operating system (AP NOS) for TIP OpenWiFi. Read more at openwifi.tip.build.
Building
Setting up your build machine
Building requires a recent Linux installation. Older systems without Python 3.7 will have trouble. See this guide for details: https://openwrt.org/docs/guide-developer/toolchain/beginners-build-guide
Install build packages on Debian/Ubuntu (or see above guide for other systems):
sudo apt install build-essential libncurses5-dev gawk git libssl-dev gettext zlib1g-dev swig unzip time rsync python3 python3-setuptools python3-yaml
Doing a native build on Linux
Use ./build.sh <target>, or follow the manual steps below:
- Clone and set up the tree. This will create an
openwrt/directory.
./setup.py --setup # for subsequent builds, use --rebase instead
- Select the profile and base package selection. This setup will install the
feeds and packages and generate the
.configfile.
cd openwrt
./scripts/gen_config.py linksys_ea8300
- Build the tree (replace
-j 8with the number of cores to use).
make -j 8 V=s
Build output
The build results are located in the openwrt/bin/ directory:
| Type | Path |
|---|---|
| Firmware images | openwrt/bin/targets/<target>/<subtarget>/ |
| Kernel modules | openwrt/bin/targets/<target>/<subtarget>/packages/ |
| Package binaries | openwrt/bin/packages/<platform>/<feed>/ |
Developer Notes
Branching model
main- Stable dev branchnext- Integration branchstaging-*- Feature/bug branchesrelease/v#.#.#- Release branches (major.minor.patch)
Repository structure
Build files:
Makefile- Calls Docker environment per targetdock-run.sh- Dockerized build environmentdocker/Dockerfile- Dockerfile for build imagebuild.sh- Build scriptsetup.py- Clone and set up the treeconfig.yml- Specifies OpenWrt version and patches to apply
Directories:
feeds/- OpenWiFi feedspatches/- OpenWiFi patches applied during buildsprofiles/- Per-target kernel configs, packages, and feeds- wifi-ax: Wi-Fi AX packages
- ucentral-ap: uCentral packages
- x64_vm: x86-64 VM image
uCentral packages
AP-NOS packages implementing the uCentral protocol include the following repositories (refer to the ucentral feed for a full list):
- ucentral-client: https://github.com/Telecominfraproject/wlan-ucentral-client
- ucentral-schema: https://github.com/Telecominfraproject/wlan-ucentral-schema
- ucentral-wifi: https://github.com/blogic/ucentral-wifi