GitBook: [2.0.0] 26 pages and 4 assets modified

This commit is contained in:
Chris Busch
2021-07-28 21:12:08 +00:00
committed by gitbook-bot
parent 9ad35193e1
commit 1eb40a6edc
5 changed files with 39 additions and 1 deletions

Binary file not shown.

After

Width:  |  Height:  |  Size: 46 KiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 102 KiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 138 KiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 5.4 KiB

View File

@@ -4,5 +4,43 @@ description: OpenWiFi 2.0
# User Interface
##
Release 2.0 uses a Single-Page Application \(SPA\) as an example user interface built using React to demonstrate several interactions using the northbound OpenAPI.
### Login to OpenWiFi SDK
![Login Page](.gitbook/assets/screen-shot-2021-07-28-at-4.40.17-pm.png)
Default username is: tip@ucentral.com and password is: openwifi
### Devices
Upon login the first page presented is a Devices table. This table reflects all discovered and managed devices known by the OpenWiFi SDK.
![Devices Table](.gitbook/assets/screen-shot-2021-07-28-at-4.42.14-pm.png)
Devices table indicates device Connected or Disconnected state in the first column with green and red respectively.
Certificate column indicates invalid, valid with mismatch serial, or valid device certificate identity state as red crossed seal, yellow seal and green seal respectively.
Serial Number column links to the device record.
Compatible model, Tx, Rx, and connected IP Address present basic information of the device type and its connection.
Three final columns provide Details \(also obtained by selecting the serial number\), Wi-Fi Analysis presenting current Wi-Fi associations and their performance and Refresh commands.
### Displaying Associations
From the Devices table, second from right column icon the WiFi Analysis may be accessed. This may also be accessed within the Device View page of a single record along the top right of Statistics section.
![WiFi Analysis Icon](.gitbook/assets/screen-shot-2021-07-28-at-4.58.03-pm.png)
Within the WiFi Analysis page, all active associations are displayed with the ability to view approximately the last 30 minutes of data reported from the Access Point.
For each association the device MAC address, mode of connection and SSID are displayed. This will include end devices as well as Wi-Fi infrastructure such as WDS and Mesh associations.
![](.gitbook/assets/screen-shot-2021-07-28-at-4.54.43-pm.png)
Associations have RSSI, Rx Rate & Bytes, Tx Rate & Bytes, MCS negotiated, Number Spatial Streams and IP Address information.