mirror of
https://github.com/Telecominfraproject/wlan-lanforge-scripts.git
synced 2025-11-03 12:18:00 +00:00
test_l3.py : autopep8 refresh
Signed-off-by: Chuck SmileyRekiere <chuck.smileyrekiere@candelatech.com>
This commit is contained in:
Chuck SmileyRekiere
committed by
shivam
shivam
parent
32dad9be95
commit
fa09ecf78f
@@ -47,26 +47,26 @@ Example using wifi_settings
|
||||
--endp_type lf_udp --rates_are_totals --side_a_min_bps=20000 --side_b_min_bps=300000000
|
||||
--test_rig CT-US-001 --test_tag 'test_L3'
|
||||
|
||||
NOTES:
|
||||
command composer : <lanforge ip>:8080/help
|
||||
NOTES:
|
||||
command composer : <lanforge ip>:8080/help
|
||||
|
||||
Drop RX - in port manager is not the same are layer 3 cx Rx Drop %
|
||||
Notes from Ben Greear
|
||||
|
||||
Port Mgr Drop Rx
|
||||
unlikely you will see rx drop on port mgr
|
||||
layer-3 rx drop is related to gaps in rx sequence numbers,
|
||||
layer-3 rx drop is related to gaps in rx sequence numbers,
|
||||
which means network under test dropped frames somehow and/or re-ordered them.
|
||||
|
||||
Layer 3 cx Rx Drop %
|
||||
cx mgr drop% is based on number peer inpoint transmitted vs what we received.
|
||||
It would ignore reodering problem, and also detect complete path loss
|
||||
(where rx drop based on seq numbers would not since there is no gap).
|
||||
But, packets in-flight through network under test may be counted as dropped
|
||||
cx mgr drop% is based on number peer inpoint transmitted vs what we received.
|
||||
It would ignore reodering problem, and also detect complete path loss
|
||||
(where rx drop based on seq numbers would not since there is no gap).
|
||||
But, packets in-flight through network under test may be counted as dropped
|
||||
when really they are probably not dropped.
|
||||
|
||||
you can quiesce a test at the end, which means stop transmitter
|
||||
but leave received going to drain packets from the network and get better drop% calculations.
|
||||
you can quiesce a test at the end, which means stop transmitter
|
||||
but leave received going to drain packets from the network and get better drop% calculations.
|
||||
Stopping a test would record packets in flight at the moment it is stopped as dropped.
|
||||
|
||||
|
||||
@@ -399,13 +399,13 @@ class L3VariableTime(Realm):
|
||||
total_dl_rate += int(endp["rx rate"])
|
||||
total_dl_rate_ll += int(endp["rx rate ll"])
|
||||
total_dl_pkts_ll += int(endp["rx pkts ll"])
|
||||
dl_rx_drop_percent = round(endp["rx drop %"],2)
|
||||
dl_rx_drop_percent = round(endp["rx drop %"], 2)
|
||||
# -B upload side
|
||||
else:
|
||||
total_ul_rate += int(endp["rx rate"])
|
||||
total_ul_rate_ll += int(endp["rx rate ll"])
|
||||
total_ul_pkts_ll += int(endp["rx pkts ll"])
|
||||
ul_rx_drop_percent = round(endp["rx drop %"],2)
|
||||
ul_rx_drop_percent = round(endp["rx drop %"], 2)
|
||||
|
||||
return lat, jit, total_dl_rate, total_dl_rate_ll, total_dl_pkts_ll, dl_rx_drop_percent, total_ul_rate, total_ul_rate_ll, total_ul_pkts_ll, ul_rx_drop_percent
|
||||
|
||||
@@ -643,7 +643,6 @@ class L3VariableTime(Realm):
|
||||
# sta_json = super().json_get(
|
||||
# "port/1/{resource}/list?field=alias".format(resource=self.resource))['interfaces']
|
||||
|
||||
|
||||
def start(self, print_pass=False):
|
||||
logger.info("Bringing up stations")
|
||||
self.admin_up(self.side_b)
|
||||
@@ -861,7 +860,7 @@ class L3VariableTime(Realm):
|
||||
self.multicast_profile.stop_mc()
|
||||
# TODO the passes and expected_passes are not checking anything
|
||||
if passes == expected_passes:
|
||||
# Sets the pass indication
|
||||
# Sets the pass indication
|
||||
self._pass(
|
||||
"PASS: Requested-Rate: %s <-> %s PDU: %s <-> %s All tests passed" %
|
||||
(ul, dl, ul_pdu, dl_pdu), print_pass)
|
||||
@@ -1023,13 +1022,13 @@ class L3VariableTime(Realm):
|
||||
|
||||
self.csv_results_writer.writerow(row)
|
||||
self.csv_results_file.flush()
|
||||
|
||||
# quiesce the cx : quiesce a test at the end, which means stop transmitter
|
||||
# but leave received going to drain packets from the network and get better drop% calculations.
|
||||
|
||||
# quiesce the cx : quiesce a test at the end, which means stop transmitter
|
||||
# but leave received going to drain packets from the network and get better drop% calculations.
|
||||
# Stopping a test would record packets in flight at the moment it is stopped as dropped.
|
||||
def quiesce_cx(self):
|
||||
self.cx_profile.quiesce_cx()
|
||||
|
||||
|
||||
# Stop traffic and admin down stations.
|
||||
def stop(self):
|
||||
self.cx_profile.stop_cx()
|
||||
@@ -1632,9 +1631,9 @@ Setting wifi_settings per radio
|
||||
'--debug',
|
||||
help='--debug this will enable debugging in py-json method',
|
||||
action='store_true')
|
||||
parser.add_argument('--log_level',
|
||||
default=None,
|
||||
help='Set logging level: debug | info | warning | error | critical')
|
||||
parser.add_argument('--log_level',
|
||||
default=None,
|
||||
help='Set logging level: debug | info | warning | error | critical')
|
||||
parser.add_argument(
|
||||
'-t',
|
||||
'--endp_type',
|
||||
@@ -1908,7 +1907,7 @@ Setting wifi_settings per radio
|
||||
exit(1)
|
||||
wifi_mode_list.append(radio_info_dict['wifi_mode'])
|
||||
enable_flags_str = radio_info_dict['enable_flags'].replace(
|
||||
'(', '').replace(')', '').replace('|', ',').replace('&&',',')
|
||||
'(', '').replace(')', '').replace('|', ',').replace('&&', ',')
|
||||
enable_flags_list = list(enable_flags_str.split(","))
|
||||
wifi_enable_flags_list.append(enable_flags_list)
|
||||
else:
|
||||
@@ -2065,9 +2064,9 @@ Setting wifi_settings per radio
|
||||
report.start_content_div2()
|
||||
|
||||
report.set_obj_html("Objective", "The Layer 3 Traffic Generation Test is designed to test the performance of the "
|
||||
"Access Point by running layer 3 Cross-Connect Traffic. Layer-3 Cross-Connects represent a stream "
|
||||
"of data flowing through the system under test. A Cross-Connect (CX) is composed of two Endpoints, "
|
||||
"each of which is associated with a particular Port (physical or virtual interface).")
|
||||
"Access Point by running layer 3 Cross-Connect Traffic. Layer-3 Cross-Connects represent a stream "
|
||||
"of data flowing through the system under test. A Cross-Connect (CX) is composed of two Endpoints, "
|
||||
"each of which is associated with a particular Port (physical or virtual interface).")
|
||||
|
||||
report.build_objective()
|
||||
|
||||
@@ -2098,45 +2097,44 @@ Setting wifi_settings per radio
|
||||
report.build_table_title()
|
||||
|
||||
wifi_mode_dict = {
|
||||
0 : 'AUTO', # 802.11g
|
||||
1 : '802.11a', # 802.11a
|
||||
2 : '802.11b', # 802.11b
|
||||
3 : '802.11g', # 802.11g
|
||||
4 : '802.11abg', # 802.11abg
|
||||
5 : '802.11abgn', # 802.11abgn
|
||||
6 : '802.11bgn', # 802.11bgn
|
||||
7 : '802.11bg', # 802.11bg
|
||||
8 : '802.11abgnAC', # 802.11abgn-AC
|
||||
9 : '802.11anAC', # 802.11an-AC
|
||||
10: '802.11an', # 802.11an
|
||||
11: '802.11bgnAC', # 802.11bgn-AC
|
||||
12: '802.11abgnAX', # 802.11abgn-AX
|
||||
# a/b/g/n/AC/AX (dual-band AX) support
|
||||
13: '802.11bgnAX', # 802.11bgn-AX
|
||||
14: '802.11anAX', # 802.11an-AX
|
||||
15: '802.11aAX' # 802.11a-AX (6E disables /n and /ac)
|
||||
0: 'AUTO', # 802.11g
|
||||
1: '802.11a', # 802.11a
|
||||
2: '802.11b', # 802.11b
|
||||
3: '802.11g', # 802.11g
|
||||
4: '802.11abg', # 802.11abg
|
||||
5: '802.11abgn', # 802.11abgn
|
||||
6: '802.11bgn', # 802.11bgn
|
||||
7: '802.11bg', # 802.11bg
|
||||
8: '802.11abgnAC', # 802.11abgn-AC
|
||||
9: '802.11anAC', # 802.11an-AC
|
||||
10: '802.11an', # 802.11an
|
||||
11: '802.11bgnAC', # 802.11bgn-AC
|
||||
12: '802.11abgnAX', # 802.11abgn-AX
|
||||
# a/b/g/n/AC/AX (dual-band AX) support
|
||||
13: '802.11bgnAX', # 802.11bgn-AX
|
||||
14: '802.11anAX', # 802.11an-AX
|
||||
15: '802.11aAX' # 802.11a-AX (6E disables /n and /ac)
|
||||
}
|
||||
|
||||
|
||||
for (
|
||||
radio_,
|
||||
ssid_,
|
||||
ssid_password_,
|
||||
ssid_security_,
|
||||
mode_,
|
||||
wifi_enable_flags_list_,
|
||||
reset_port_enable_,
|
||||
reset_port_time_min_,
|
||||
reset_port_time_max_) in zip(
|
||||
radio_name_list,
|
||||
ssid_list,
|
||||
ssid_password_list,
|
||||
ssid_security_list,
|
||||
wifi_mode_list,
|
||||
wifi_enable_flags_list,
|
||||
reset_port_enable_list,
|
||||
reset_port_time_min_list,
|
||||
reset_port_time_max_list):
|
||||
radio_,
|
||||
ssid_,
|
||||
ssid_password_,
|
||||
ssid_security_,
|
||||
mode_,
|
||||
wifi_enable_flags_list_,
|
||||
reset_port_enable_,
|
||||
reset_port_time_min_,
|
||||
reset_port_time_max_) in zip(
|
||||
radio_name_list,
|
||||
ssid_list,
|
||||
ssid_password_list,
|
||||
ssid_security_list,
|
||||
wifi_mode_list,
|
||||
wifi_enable_flags_list,
|
||||
reset_port_enable_list,
|
||||
reset_port_time_min_list,
|
||||
reset_port_time_max_list):
|
||||
|
||||
mode_value = wifi_mode_dict[int(mode_)]
|
||||
|
||||
|
||||
Reference in New Issue
Block a user