mirror of
https://github.com/Telecominfraproject/wlan-testing.git
synced 2025-10-30 18:38:06 +00:00
Add testbed ferdale-01 test configuration files.
Currently this is hosting an EA8300.
This commit is contained in:
Ben Greear
10
testbeds/ferndale-basic-01/NOTES.txt
Normal file
10
testbeds/ferndale-basic-01/NOTES.txt
Normal file
@@ -0,0 +1,10 @@
|
||||
|
||||
DUT is an MR8300, running TIP OpenWrt.
|
||||
This uses ath10k-ct firmware, and by default, the ath10k driver only supports 32 stations per
|
||||
radio. To improve this, I tweaked the setup using the fwcfg files.
|
||||
The radios also only work on certain frequencies, so one has to configure them
|
||||
carefully.
|
||||
|
||||
See the OpenWrt-overlay directory for files that should be copied onto the DUT
|
||||
to work with this test. Once OpenSync cloud stuff is complete, the overlay may
|
||||
not be needed.
|
||||
@@ -0,0 +1,46 @@
|
||||
|
||||
config wifi-device 'radio0'
|
||||
option type 'mac80211'
|
||||
option hwmode '11a'
|
||||
option path 'soc/40000000.pci/pci0000:00/0000:00:00.0/0000:01:00.0'
|
||||
option htmode 'VHT80'
|
||||
option disabled '0'
|
||||
option channel '149'
|
||||
|
||||
config wifi-iface 'default_radio0'
|
||||
option device 'radio0'
|
||||
option network 'lan'
|
||||
option mode 'ap'
|
||||
option encryption 'none'
|
||||
option ssid 'OpenWrt-5hi'
|
||||
|
||||
config wifi-device 'radio1'
|
||||
option type 'mac80211'
|
||||
option hwmode '11g'
|
||||
option path 'platform/soc/a000000.wifi'
|
||||
option htmode 'HT20'
|
||||
option disabled '0'
|
||||
option channel '1'
|
||||
|
||||
config wifi-iface 'default_radio1'
|
||||
option device 'radio1'
|
||||
option network 'lan'
|
||||
option mode 'ap'
|
||||
option encryption 'none'
|
||||
option ssid 'OpenWrt-2'
|
||||
|
||||
config wifi-device 'radio2'
|
||||
option type 'mac80211'
|
||||
option hwmode '11a'
|
||||
option path 'platform/soc/a800000.wifi'
|
||||
option htmode 'VHT80'
|
||||
option disabled '0'
|
||||
option channel '36'
|
||||
|
||||
config wifi-iface 'default_radio2'
|
||||
option device 'radio2'
|
||||
option network 'lan'
|
||||
option mode 'ap'
|
||||
option encryption 'none'
|
||||
option ssid 'OpenWrt-5lo'
|
||||
|
||||
Binary file not shown.
Binary file not shown.
@@ -0,0 +1,16 @@
|
||||
vdevs = 8
|
||||
peers = 162
|
||||
active_peers = 162
|
||||
stations = 162
|
||||
rate_ctrl_objs = 7
|
||||
regdom = 840
|
||||
#fwname = firmware-5-htt-mgt-b.bin
|
||||
fwver = 5
|
||||
nohwcrypt = 0
|
||||
ct_sta_mode = 0
|
||||
tx_desc = 2000
|
||||
#max_nss = 3
|
||||
tids = 260
|
||||
skid_limit = 360
|
||||
max_amsdus = 3
|
||||
|
||||
@@ -0,0 +1,16 @@
|
||||
vdevs = 8
|
||||
peers = 162
|
||||
active_peers = 162
|
||||
stations = 162
|
||||
rate_ctrl_objs = 7
|
||||
regdom = 840
|
||||
#fwname = firmware-5-htt-mgt-b.bin
|
||||
fwver = 5
|
||||
nohwcrypt = 0
|
||||
ct_sta_mode = 0
|
||||
tx_desc = 2000
|
||||
#max_nss = 3
|
||||
tids = 260
|
||||
skid_limit = 360
|
||||
max_amsdus = 3
|
||||
|
||||
@@ -0,0 +1,16 @@
|
||||
# 9888 chip
|
||||
vdevs = 8
|
||||
peers = 202
|
||||
active_peers = 202
|
||||
stations = 202
|
||||
rate_ctrl_objs = 7
|
||||
regdom = 840
|
||||
#fwname = firmware-5-htt-mgt-b.bin
|
||||
fwver = 5
|
||||
nohwcrypt = 0
|
||||
ct_sta_mode = 0
|
||||
tx_desc = 2200
|
||||
#max_nss = 3
|
||||
tids = 450
|
||||
skid_limit = 360
|
||||
max_amsdus = 3
|
||||
80
testbeds/ferndale-basic-01/ap_auto.txt
Normal file
80
testbeds/ferndale-basic-01/ap_auto.txt
Normal file
@@ -0,0 +1,80 @@
|
||||
[BLANK]
|
||||
sel_port-0: 1.1.sta00500
|
||||
show_events: 1
|
||||
show_log: 0
|
||||
port_sorting: 0
|
||||
kpi_id: AP Auto
|
||||
bg: 0xE0ECF8
|
||||
test_rig:
|
||||
show_scan: 1
|
||||
auto_helper: 1
|
||||
skip_2: 1
|
||||
skip_5: 1
|
||||
dut5-0: ea8300 OpenWrt-5lo
|
||||
dut2-0: ea8300 OpenWrt-2
|
||||
dut5-1: NA
|
||||
dut2-1: NA
|
||||
dut5-2: ea8300 OpenWrt-2
|
||||
dut2-2: NA
|
||||
spatial_streams: AUTO
|
||||
bandw_options: AUTO
|
||||
modes: Auto
|
||||
upstream_port: 1.1.2 eth2
|
||||
operator:
|
||||
mconn: 1
|
||||
tos: 0
|
||||
vid_buf: 1000000
|
||||
vid_speed: 700000
|
||||
reset_stall_thresh_udp_dl: 9600
|
||||
reset_stall_thresh_udp_ul: 9600
|
||||
reset_stall_thresh_tcp_dl: 9600
|
||||
reset_stall_thresh_tcp_ul: 9600
|
||||
reset_stall_thresh_l4: 100000
|
||||
reset_stall_thresh_voip: 20000
|
||||
stab_udp_dl_min: 56000
|
||||
stab_udp_dl_max: 0
|
||||
stab_udp_ul_min: 56000
|
||||
stab_udp_ul_max: 0
|
||||
stab_tcp_dl_min: 500000
|
||||
stab_tcp_dl_max: 0
|
||||
stab_tcp_ul_min: 500000
|
||||
stab_tcp_ul_max: 0
|
||||
dl_speed: 85%
|
||||
ul_speed: 85%
|
||||
max_stations_2: 128
|
||||
max_stations_5: 132
|
||||
max_stations_dual: 260
|
||||
lt_sta: 2
|
||||
voip_calls: 0
|
||||
lt_dur: 3600
|
||||
reset_dur: 600
|
||||
lt_gi: 30
|
||||
dur20: 20
|
||||
hunt_retries: 1
|
||||
cap_dl: 1
|
||||
cap_ul: 0
|
||||
cap_use_pkt_sizes: 0
|
||||
stability_reset_radios: 0
|
||||
pkt_loss_thresh: 10000
|
||||
frame_sizes: 200, 512, 1024, MTU
|
||||
capacities: 1, 2, 5, 10, 20, 40, 64, 128, 256, 512, 1024, MAX
|
||||
radio2-0: 1.1.4 wiphy0
|
||||
radio2-1: 1.1.6 wiphy2
|
||||
radio5-0: 1.1.5 wiphy1
|
||||
radio5-1: 1.1.7 wiphy3
|
||||
radio5-2: 1.1.8 wiphy4
|
||||
radio5-3: 1.1.9 wiphy5
|
||||
radio5-4: 1.1.10 wiphy6
|
||||
radio5-5: 1.1.11 wiphy7
|
||||
basic_cx: 1
|
||||
tput: 0
|
||||
dual_band_tput: 0
|
||||
capacity: 0
|
||||
longterm: 0
|
||||
mix_stability: 0
|
||||
loop_iter: 1
|
||||
reset_batch_size: 1
|
||||
reset_duration_min: 10000
|
||||
reset_duration_max: 60000
|
||||
|
||||
|
||||
55
testbeds/ferndale-basic-01/dpt-pkt-sz.txt
Normal file
55
testbeds/ferndale-basic-01/dpt-pkt-sz.txt
Normal file
@@ -0,0 +1,55 @@
|
||||
[BLANK]
|
||||
sel_port-0: 1.1.eth0
|
||||
show_events: 1
|
||||
show_log: 0
|
||||
port_sorting: 0
|
||||
bg: 0xE0ECF8
|
||||
test_rig:
|
||||
show_scan: 1
|
||||
auto_helper: 0
|
||||
skip_2: 0
|
||||
skip_5: 0
|
||||
selected_dut: mr8300
|
||||
duration: 15000
|
||||
traffic_port: 1.1.6 sta00000
|
||||
upstream_port: 1.1.1 eth0
|
||||
path_loss: 10
|
||||
speed: 85%
|
||||
speed2: 0Kbps
|
||||
min_rssi_bound: -150
|
||||
max_rssi_bound: 0
|
||||
channels: AUTO
|
||||
modes: Auto
|
||||
pkts: 60;142;256;512;1024;MTU;4000
|
||||
spatial_streams: AUTO
|
||||
security_options: AUTO
|
||||
bandw_options: AUTO
|
||||
traffic_types: UDP
|
||||
directions: DUT Transmit;DUT Receive
|
||||
txo_preamble: OFDM
|
||||
txo_mcs: 0 CCK, OFDM, HT, VHT
|
||||
txo_retries: No Retry
|
||||
txo_sgi: OFF
|
||||
txo_txpower: 15
|
||||
attenuator: 0
|
||||
attenuator2: 0
|
||||
attenuator_mod: 255
|
||||
attenuator_mod2: 255
|
||||
attenuations: 0..+50..950
|
||||
attenuations2: 0..+50..950
|
||||
chamber: 0
|
||||
tt_deg: 0..+45..359
|
||||
cust_pkt_sz:
|
||||
show_3s: 0
|
||||
show_ll_graphs: 0
|
||||
show_gp_graphs: 1
|
||||
show_1m: 1
|
||||
pause_iter: 0
|
||||
show_realtime: 1
|
||||
operator:
|
||||
mconn: 1
|
||||
mpkt: 1000
|
||||
tos: 0
|
||||
loop_iterations: 1
|
||||
|
||||
|
||||
55
testbeds/ferndale-basic-01/dpt.txt
Normal file
55
testbeds/ferndale-basic-01/dpt.txt
Normal file
@@ -0,0 +1,55 @@
|
||||
[BLANK]
|
||||
show_events: 1
|
||||
show_log: 0
|
||||
port_sorting: 0
|
||||
kpi_id: Dataplane
|
||||
bg: 0xE0ECF8
|
||||
test_rig:
|
||||
show_scan: 1
|
||||
auto_helper: 0
|
||||
skip_2: 0
|
||||
skip_5: 0
|
||||
selected_dut: ea8300
|
||||
duration: 15000
|
||||
traffic_port: 1.1.136 sta01001
|
||||
upstream_port: 1.1.2 eth2
|
||||
path_loss: 10
|
||||
speed: 85%
|
||||
speed2: 0Kbps
|
||||
min_rssi_bound: -150
|
||||
max_rssi_bound: 0
|
||||
channels: AUTO
|
||||
modes: Auto
|
||||
pkts: 60;142;256;512;1024;MTU;4000
|
||||
spatial_streams: AUTO
|
||||
security_options: AUTO
|
||||
bandw_options: AUTO
|
||||
traffic_types: UDP
|
||||
directions: DUT Transmit;DUT Receive
|
||||
txo_preamble: OFDM
|
||||
txo_mcs: 0 CCK, OFDM, HT, VHT
|
||||
txo_retries: No Retry
|
||||
txo_sgi: OFF
|
||||
txo_txpower: 15
|
||||
attenuator: 0
|
||||
attenuator2: 0
|
||||
attenuator_mod: 255
|
||||
attenuator_mod2: 255
|
||||
attenuations: 0..+50..950
|
||||
attenuations2: 0..+50..950
|
||||
chamber: 0
|
||||
tt_deg: 0..+45..359
|
||||
cust_pkt_sz:
|
||||
show_3s: 0
|
||||
show_ll_graphs: 1
|
||||
show_gp_graphs: 1
|
||||
show_1m: 1
|
||||
pause_iter: 0
|
||||
show_realtime: 1
|
||||
operator:
|
||||
mconn: 1
|
||||
mpkt: 1000
|
||||
tos: 0
|
||||
loop_iterations: 1
|
||||
|
||||
|
||||
60
testbeds/ferndale-basic-01/run_basic.bash
Executable file
60
testbeds/ferndale-basic-01/run_basic.bash
Executable file
@@ -0,0 +1,60 @@
|
||||
#!/bin/bash
|
||||
|
||||
# Example usage of this script
|
||||
# DUT_SW_VER=my-build-id ./run_basic.bash
|
||||
#
|
||||
# Other DUT variables in test_bed_cfg.bash may also be over-ridden,
|
||||
# including those below. See LANforge 'add_dut' CLI command for
|
||||
# details on what these variables are for.
|
||||
|
||||
# DUT_FLAGS DUT_FLAGS_MASK DUT_SW_VER DUT_HW_VER DUT_MODEL
|
||||
# DUT_SERIAL DUT_SSID1 DUT_SSID2 DUT_SSID3
|
||||
# DUT_PASSWD1 DUT_PASSWD2 DUT_PASSWD3
|
||||
# DUT_BSSID1 DUT_BSSID2 DUT_BSSID3
|
||||
|
||||
# Source config file
|
||||
. test_bed_cfg.bash
|
||||
|
||||
echo "<b>Top wlan-testing git commits.</b><br><pre>" > ./tmp_gitlog.html
|
||||
git log -n 8 --oneline >> ./tmp_gitlog.html
|
||||
echo "</pre>" >> ./tmp_gitlog.html
|
||||
|
||||
NOTES_HTML=`pwd`/testbed_notes.html
|
||||
GITLOG=`pwd`/tmp_gitlog.html
|
||||
export NOTES_HTML GITLOG
|
||||
|
||||
# TODO: Copy config file to cloud controller and restart it
|
||||
# and/or do other config to make it work.
|
||||
|
||||
# Change to scripts dir
|
||||
cd ../../lanforge/lanforge-scripts/gui
|
||||
|
||||
# Where to place results. basic_regression.bash will use this variable.
|
||||
RSLTS_DIR=/tmp/ferndale-01-basic-regression
|
||||
export RSLTS_DIR
|
||||
|
||||
# Clean any existing data from the results dir
|
||||
rm -fr $RSLTS_DIR
|
||||
|
||||
# Run one test
|
||||
# DEFAULT_ENABLE=0 DO_SHORT_AP_STABILITY_RESET=1 ./basic_regression.bash
|
||||
|
||||
|
||||
# Run all tests
|
||||
./basic_regression.bash
|
||||
|
||||
cd -
|
||||
|
||||
if [ ! -d $RSLTS_DIR ]
|
||||
then
|
||||
echo "Test did not run as expected, $RSLTS_DIR not found."
|
||||
mkdir -p $RSLTS_DIR
|
||||
fi
|
||||
|
||||
if [ -f ${MY_TMPDIR}/basic_regression_log.txt ]
|
||||
then
|
||||
echo "Found ${MY_TMPDIR}/basic_regression_log.txt, moving into $RSLTS_DIR"
|
||||
mv ${MY_TMPDIR}/basic_regression_log.txt $RSLTS_DIR/
|
||||
fi
|
||||
|
||||
echo "See results in $RSLTS_DIR"
|
||||
64
testbeds/ferndale-basic-01/run_basic_fast.bash
Executable file
64
testbeds/ferndale-basic-01/run_basic_fast.bash
Executable file
@@ -0,0 +1,64 @@
|
||||
#!/bin/bash
|
||||
|
||||
# Example usage of this script
|
||||
# DUT_SW_VER=my-build-id ./run_basic.bash
|
||||
#
|
||||
# Other DUT variables in test_bed_cfg.bash may also be over-ridden,
|
||||
# including those below. See LANforge 'add_dut' CLI command for
|
||||
# details on what these variables are for.
|
||||
|
||||
# DUT_FLAGS DUT_FLAGS_MASK DUT_SW_VER DUT_HW_VER DUT_MODEL
|
||||
# DUT_SERIAL DUT_SSID1 DUT_SSID2 DUT_SSID3
|
||||
# DUT_PASSWD1 DUT_PASSWD2 DUT_PASSWD3
|
||||
# DUT_BSSID1 DUT_BSSID2 DUT_BSSID3
|
||||
|
||||
# Source config file
|
||||
. test_bed_cfg.bash
|
||||
|
||||
echo "<b>Top wlan-testing git commits.</b><br><pre>" > ./tmp_gitlog.html
|
||||
git log -n 8 --oneline >> ./tmp_gitlog.html
|
||||
echo "</pre>" >> ./tmp_gitlog.html
|
||||
|
||||
NOTES_HTML=`pwd`/testbed_notes.html
|
||||
GITLOG=`pwd`/tmp_gitlog.html
|
||||
export NOTES_HTML GITLOG
|
||||
|
||||
# TODO: Copy config file to cloud controller and restart it
|
||||
# and/or do other config to make it work.
|
||||
|
||||
# Change to scripts dir
|
||||
cd ../../lanforge/lanforge-scripts/gui
|
||||
|
||||
# Where to place results. basic_regression.bash will use this variable.
|
||||
RSLTS_DIR=/tmp/ferndale-01-basic-regression-fast
|
||||
export RSLTS_DIR
|
||||
|
||||
# Clean any existing data from the results dir
|
||||
rm -fr $RSLTS_DIR
|
||||
|
||||
# Run a subset of available tests
|
||||
# See 'Tests to run' comment in basic_regression.bash for available options.
|
||||
|
||||
#DEFAULT_ENABLE=0 WCT_DURATION=20s DO_SHORT_AP_BASIC_CX=1 DO_WCT_BI=1 ./basic_regression.bash
|
||||
|
||||
DEFAULT_ENABLE=0 WCT_DURATION=20s DO_SHORT_AP_BASIC_CX=1 DO_WCT_BI=0 ./basic_regression.bash
|
||||
|
||||
|
||||
# Run all tests
|
||||
#./basic_regression.bash
|
||||
|
||||
cd -
|
||||
|
||||
if [ ! -d $RSLTS_DIR ]
|
||||
then
|
||||
echo "Test did not run as expected, $RSLTS_DIR not found."
|
||||
mkdir -p $RSLTS_DIR
|
||||
fi
|
||||
|
||||
if [ -f ${MY_TMPDIR}/basic_regression_log.txt ]
|
||||
then
|
||||
echo "Found ${MY_TMPDIR}/basic_regression_log.txt, moving into $RSLTS_DIR"
|
||||
mv ${MY_TMPDIR}/basic_regression_log.txt $RSLTS_DIR/
|
||||
fi
|
||||
|
||||
echo "See results in $RSLTS_DIR"
|
||||
15
testbeds/ferndale-basic-01/scenario.txt
Normal file
15
testbeds/ferndale-basic-01/scenario.txt
Normal file
@@ -0,0 +1,15 @@
|
||||
profile_link 1.1 STA-AC 64 'DUT: ea8300 Radio-1' NA wiphy0,AUTO -1
|
||||
profile_link 1.1 STA-AC 64 'DUT: ea8300 Radio-1' NA wiphy2,AUTO -1
|
||||
profile_link 1.1 STA-AC 64 'DUT: ea8300 Radio-2' NA wiphy1,AUTO -1
|
||||
profile_link 1.1 STA-AC 64 'DUT: ea8300 Radio-3' NA wiphy3,AUTO -1
|
||||
profile_link 1.1 upstream-dhcp 1 NA NA eth2,AUTO -1
|
||||
profile_link 1.1 uplink-nat 1 'DUT: upstream LAN 92.168.100.1/24' NA eth3,eth2 -1
|
||||
profile_link 1.1 STA-AC 1 'DUT: ea8300 Radio-2' NA wiphy4,AUTO -1
|
||||
profile_link 1.1 STA-AC 1 'DUT: ea8300 Radio-3' NA wiphy5,AUTO -1
|
||||
profile_link 1.1 STA-AC 1 'DUT: ea8300 Radio-2' NA wiphy6,AUTO -1
|
||||
profile_link 1.1 STA-AC 1 'DUT: ea8300 Radio-3' NA wiphy7,AUTO -1
|
||||
dut ea8300 393 148
|
||||
dut upstream 306 62
|
||||
resource 1.1 132 218
|
||||
|
||||
|
||||
58
testbeds/ferndale-basic-01/test_bed_cfg.bash
Normal file
58
testbeds/ferndale-basic-01/test_bed_cfg.bash
Normal file
@@ -0,0 +1,58 @@
|
||||
# Example test-bed configuration
|
||||
|
||||
# Scripts should source this file to set the default environment variables
|
||||
# and then override the variables specific to their test case (and it can be done
|
||||
# in opposite order for same results
|
||||
#
|
||||
# After the env variables are set,
|
||||
# call the 'lanforge/lanforge-scripts/gui/basic_regression.bash'
|
||||
# from the directory in which it resides.
|
||||
|
||||
PWD=`pwd`
|
||||
AP_SERIAL=${AP_SERIAL:-/dev/ttyUSB1}
|
||||
LF_SERIAL=${LF_SERIAL:-/dev/ttyUSB0}
|
||||
LFPASSWD=${LFPASSWD:-lanforge} # Root password on LANforge machine
|
||||
AP_AUTO_CFG_FILE=${AP_AUTO_CFG_FILE:-$PWD/ap-auto.txt}
|
||||
WCT_CFG_FILE=${WCT_CFG_FILE:-$PWD/wct.txt}
|
||||
DPT_CFG_FILE=${DPT_CFG_FILE:-$PWD/dpt-pkt-sz.txt}
|
||||
SCENARIO_CFG_FILE=${SCENARIO_CFG_FILE:-$PWD/scenario.txt}
|
||||
|
||||
# LANforge target machine
|
||||
LFMANAGER=${LFMANAGER:-192.168.100.209}
|
||||
|
||||
# LANforge GUI machine (may often be same as target)
|
||||
GMANAGER=${GMANAGER:-192.168.100.209}
|
||||
GMPORT=${GMPORT:-3990}
|
||||
MY_TMPDIR=${MY_TMPDIR:-/tmp}
|
||||
|
||||
# Test configuration (10 minutes by default, in interest of time)
|
||||
STABILITY_DURATION=${STABILITY_DURATION:-600}
|
||||
TEST_RIG_ID=${TEST_RIG_ID:-Ferndale-01-Basic-Testbed}
|
||||
|
||||
# DUT configuration
|
||||
#DUT_FLAGS=${DUT_FLAGS:-0x22} # AP, WPA-PSK
|
||||
DUT_FLAGS=${DUT_FLAGS:-0x2} # AP, Open
|
||||
DUT_FLAGS_MASK=${DUT_FLAGS_MASK:-0xFFFF}
|
||||
DUT_SW_VER=${DUT_SW_VER:-OpenWrt-Stock}
|
||||
DUT_HW_VER=Linksys-EA8300
|
||||
DUT_MODEL=Linksys-EA8300
|
||||
DUT_SERIAL=${DUT_SERIAL:-NA}
|
||||
DUT_SSID1=${DUT_SSID1:-OpenWrt-2}
|
||||
DUT_SSID2=${DUT_SSID2:-OpenWrt-5lo}
|
||||
DUT_SSID3=${DUT_SSID3:-OpenWrt-5hi}
|
||||
DUT_PASSWD1=${DUT_PASSWD1:-12345678}
|
||||
DUT_PASSWD2=${DUT_PASSWD2:-12345678}
|
||||
DUT_PASSWD3=${DUT_PASSWD3:-12345678}
|
||||
DUT_BSSID1=24:f5:a2:08:21:6c
|
||||
DUT_BSSID2=24:f5:a2:08:21:6d
|
||||
DUT_BSSID3=24:f5:a2:08:21:6e
|
||||
|
||||
export LF_SERIAL AP_SERIAL LFPASSWD
|
||||
export AP_AUTO_CFG_FILE WCT_CFG_FILE DPT_CFG_FILE SCENARIO_CFG_FILE
|
||||
export LFMANAGER GMANAGER GMPORT MY_TMPDIR
|
||||
export STABILITY_DURATION TEST_RIG_ID
|
||||
export DUT_FLAGS DUT_FLAGS_MASK DUT_SW_VER DUT_HW_VER DUT_MODEL
|
||||
export DUT_SERIAL DUT_SSID1 DUT_SSID2 DUT_SSID3
|
||||
export DUT_PASSWD1 DUT_PASSWD2 DUT_PASSWD3
|
||||
export DUT_BSSID1 DUT_BSSID2 DUT_BSSID3
|
||||
|
||||
323
testbeds/ferndale-basic-01/wct.txt
Normal file
323
testbeds/ferndale-basic-01/wct.txt
Normal file
@@ -0,0 +1,323 @@
|
||||
[BLANK]
|
||||
sel_port-0: 1.1.eth2
|
||||
sel_port-1: 1.1.sta00000
|
||||
sel_port-2: 1.1.sta01000
|
||||
sel_port-3: 1.1.sta00500
|
||||
sel_port-4: 1.1.sta01500
|
||||
sel_port-5: 1.1.sta03000
|
||||
sel_port-6: 1.1.sta03500
|
||||
sel_port-7: 1.1.sta04000
|
||||
sel_port-8: 1.1.sta04500
|
||||
sel_port-9: 1.1.sta00001
|
||||
sel_port-10: 1.1.sta01001
|
||||
sel_port-11: 1.1.sta00501
|
||||
sel_port-12: 1.1.sta01501
|
||||
sel_port-13: 1.1.sta00002
|
||||
sel_port-14: 1.1.sta01002
|
||||
sel_port-15: 1.1.sta00502
|
||||
sel_port-16: 1.1.sta01502
|
||||
sel_port-17: 1.1.sta00003
|
||||
sel_port-18: 1.1.sta01003
|
||||
sel_port-19: 1.1.sta00503
|
||||
sel_port-20: 1.1.sta01503
|
||||
sel_port-21: 1.1.sta00004
|
||||
sel_port-22: 1.1.sta01004
|
||||
sel_port-23: 1.1.sta00504
|
||||
sel_port-24: 1.1.sta01504
|
||||
sel_port-25: 1.1.sta00005
|
||||
sel_port-26: 1.1.sta01005
|
||||
sel_port-27: 1.1.sta00505
|
||||
sel_port-28: 1.1.sta01505
|
||||
sel_port-29: 1.1.sta00006
|
||||
sel_port-30: 1.1.sta01006
|
||||
sel_port-31: 1.1.sta00506
|
||||
sel_port-32: 1.1.sta01506
|
||||
sel_port-33: 1.1.sta00007
|
||||
sel_port-34: 1.1.sta01007
|
||||
sel_port-35: 1.1.sta00507
|
||||
sel_port-36: 1.1.sta01507
|
||||
sel_port-37: 1.1.sta00008
|
||||
sel_port-38: 1.1.sta01008
|
||||
sel_port-39: 1.1.sta00508
|
||||
sel_port-40: 1.1.sta01508
|
||||
sel_port-41: 1.1.sta00009
|
||||
sel_port-42: 1.1.sta01009
|
||||
sel_port-43: 1.1.sta00509
|
||||
sel_port-44: 1.1.sta01509
|
||||
sel_port-45: 1.1.sta00010
|
||||
sel_port-46: 1.1.sta01010
|
||||
sel_port-47: 1.1.sta00510
|
||||
sel_port-48: 1.1.sta01510
|
||||
sel_port-49: 1.1.sta00011
|
||||
sel_port-50: 1.1.sta01011
|
||||
sel_port-51: 1.1.sta00511
|
||||
sel_port-52: 1.1.sta01511
|
||||
sel_port-53: 1.1.sta00012
|
||||
sel_port-54: 1.1.sta01012
|
||||
sel_port-55: 1.1.sta00512
|
||||
sel_port-56: 1.1.sta01512
|
||||
sel_port-57: 1.1.sta00013
|
||||
sel_port-58: 1.1.sta01013
|
||||
sel_port-59: 1.1.sta00513
|
||||
sel_port-60: 1.1.sta01513
|
||||
sel_port-61: 1.1.sta00014
|
||||
sel_port-62: 1.1.sta01014
|
||||
sel_port-63: 1.1.sta00514
|
||||
sel_port-64: 1.1.sta01514
|
||||
sel_port-65: 1.1.sta00015
|
||||
sel_port-66: 1.1.sta01015
|
||||
sel_port-67: 1.1.sta00515
|
||||
sel_port-68: 1.1.sta01515
|
||||
sel_port-69: 1.1.sta00016
|
||||
sel_port-70: 1.1.sta01016
|
||||
sel_port-71: 1.1.sta00516
|
||||
sel_port-72: 1.1.sta01516
|
||||
sel_port-73: 1.1.sta00017
|
||||
sel_port-74: 1.1.sta01017
|
||||
sel_port-75: 1.1.sta00517
|
||||
sel_port-76: 1.1.sta01517
|
||||
sel_port-77: 1.1.sta00018
|
||||
sel_port-78: 1.1.sta01018
|
||||
sel_port-79: 1.1.sta00518
|
||||
sel_port-80: 1.1.sta01518
|
||||
sel_port-81: 1.1.sta00019
|
||||
sel_port-82: 1.1.sta01019
|
||||
sel_port-83: 1.1.sta00519
|
||||
sel_port-84: 1.1.sta01519
|
||||
sel_port-85: 1.1.sta00020
|
||||
sel_port-86: 1.1.sta01020
|
||||
sel_port-87: 1.1.sta00520
|
||||
sel_port-88: 1.1.sta01520
|
||||
sel_port-89: 1.1.sta00021
|
||||
sel_port-90: 1.1.sta01021
|
||||
sel_port-91: 1.1.sta00521
|
||||
sel_port-92: 1.1.sta01521
|
||||
sel_port-93: 1.1.sta00022
|
||||
sel_port-94: 1.1.sta01022
|
||||
sel_port-95: 1.1.sta00522
|
||||
sel_port-96: 1.1.sta01522
|
||||
sel_port-97: 1.1.sta00023
|
||||
sel_port-98: 1.1.sta01023
|
||||
sel_port-99: 1.1.sta00523
|
||||
sel_port-100: 1.1.sta01523
|
||||
sel_port-101: 1.1.sta00024
|
||||
sel_port-102: 1.1.sta01024
|
||||
sel_port-103: 1.1.sta00524
|
||||
sel_port-104: 1.1.sta01524
|
||||
sel_port-105: 1.1.sta00025
|
||||
sel_port-106: 1.1.sta01025
|
||||
sel_port-107: 1.1.sta00525
|
||||
sel_port-108: 1.1.sta01525
|
||||
sel_port-109: 1.1.sta00026
|
||||
sel_port-110: 1.1.sta01026
|
||||
sel_port-111: 1.1.sta00526
|
||||
sel_port-112: 1.1.sta01526
|
||||
sel_port-113: 1.1.sta00027
|
||||
sel_port-114: 1.1.sta01027
|
||||
sel_port-115: 1.1.sta00527
|
||||
sel_port-116: 1.1.sta01527
|
||||
sel_port-117: 1.1.sta00028
|
||||
sel_port-118: 1.1.sta01028
|
||||
sel_port-119: 1.1.sta00528
|
||||
sel_port-120: 1.1.sta01528
|
||||
sel_port-121: 1.1.sta00029
|
||||
sel_port-122: 1.1.sta01029
|
||||
sel_port-123: 1.1.sta00529
|
||||
sel_port-124: 1.1.sta01529
|
||||
sel_port-125: 1.1.sta00030
|
||||
sel_port-126: 1.1.sta01030
|
||||
sel_port-127: 1.1.sta00530
|
||||
sel_port-128: 1.1.sta01530
|
||||
sel_port-129: 1.1.sta00031
|
||||
sel_port-130: 1.1.sta01031
|
||||
sel_port-131: 1.1.sta00531
|
||||
sel_port-132: 1.1.sta01531
|
||||
sel_port-133: 1.1.sta00032
|
||||
sel_port-134: 1.1.sta01032
|
||||
sel_port-135: 1.1.sta00532
|
||||
sel_port-136: 1.1.sta01532
|
||||
sel_port-137: 1.1.sta00033
|
||||
sel_port-138: 1.1.sta01033
|
||||
sel_port-139: 1.1.sta00533
|
||||
sel_port-140: 1.1.sta01533
|
||||
sel_port-141: 1.1.sta00034
|
||||
sel_port-142: 1.1.sta01034
|
||||
sel_port-143: 1.1.sta00534
|
||||
sel_port-144: 1.1.sta01534
|
||||
sel_port-145: 1.1.sta00035
|
||||
sel_port-146: 1.1.sta01035
|
||||
sel_port-147: 1.1.sta00535
|
||||
sel_port-148: 1.1.sta01535
|
||||
sel_port-149: 1.1.sta00036
|
||||
sel_port-150: 1.1.sta01036
|
||||
sel_port-151: 1.1.sta00536
|
||||
sel_port-152: 1.1.sta01536
|
||||
sel_port-153: 1.1.sta00037
|
||||
sel_port-154: 1.1.sta01037
|
||||
sel_port-155: 1.1.sta00537
|
||||
sel_port-156: 1.1.sta01537
|
||||
sel_port-157: 1.1.sta00038
|
||||
sel_port-158: 1.1.sta01038
|
||||
sel_port-159: 1.1.sta00538
|
||||
sel_port-160: 1.1.sta01538
|
||||
sel_port-161: 1.1.sta00039
|
||||
sel_port-162: 1.1.sta01039
|
||||
sel_port-163: 1.1.sta00539
|
||||
sel_port-164: 1.1.sta01539
|
||||
sel_port-165: 1.1.sta00040
|
||||
sel_port-166: 1.1.sta01040
|
||||
sel_port-167: 1.1.sta00540
|
||||
sel_port-168: 1.1.sta01540
|
||||
sel_port-169: 1.1.sta00041
|
||||
sel_port-170: 1.1.sta01041
|
||||
sel_port-171: 1.1.sta00541
|
||||
sel_port-172: 1.1.sta01541
|
||||
sel_port-173: 1.1.sta00042
|
||||
sel_port-174: 1.1.sta01042
|
||||
sel_port-175: 1.1.sta00542
|
||||
sel_port-176: 1.1.sta01542
|
||||
sel_port-177: 1.1.sta00043
|
||||
sel_port-178: 1.1.sta01043
|
||||
sel_port-179: 1.1.sta00543
|
||||
sel_port-180: 1.1.sta01543
|
||||
sel_port-181: 1.1.sta00044
|
||||
sel_port-182: 1.1.sta01044
|
||||
sel_port-183: 1.1.sta00544
|
||||
sel_port-184: 1.1.sta01544
|
||||
sel_port-185: 1.1.sta00045
|
||||
sel_port-186: 1.1.sta01045
|
||||
sel_port-187: 1.1.sta00545
|
||||
sel_port-188: 1.1.sta01545
|
||||
sel_port-189: 1.1.sta00046
|
||||
sel_port-190: 1.1.sta01046
|
||||
sel_port-191: 1.1.sta00546
|
||||
sel_port-192: 1.1.sta01546
|
||||
sel_port-193: 1.1.sta00047
|
||||
sel_port-194: 1.1.sta01047
|
||||
sel_port-195: 1.1.sta00547
|
||||
sel_port-196: 1.1.sta01547
|
||||
sel_port-197: 1.1.sta00048
|
||||
sel_port-198: 1.1.sta01048
|
||||
sel_port-199: 1.1.sta00548
|
||||
sel_port-200: 1.1.sta01548
|
||||
sel_port-201: 1.1.sta00049
|
||||
sel_port-202: 1.1.sta01049
|
||||
sel_port-203: 1.1.sta00549
|
||||
sel_port-204: 1.1.sta01549
|
||||
sel_port-205: 1.1.sta00050
|
||||
sel_port-206: 1.1.sta01050
|
||||
sel_port-207: 1.1.sta00550
|
||||
sel_port-208: 1.1.sta01550
|
||||
sel_port-209: 1.1.sta00051
|
||||
sel_port-210: 1.1.sta01051
|
||||
sel_port-211: 1.1.sta00551
|
||||
sel_port-212: 1.1.sta01551
|
||||
sel_port-213: 1.1.sta00052
|
||||
sel_port-214: 1.1.sta01052
|
||||
sel_port-215: 1.1.sta00552
|
||||
sel_port-216: 1.1.sta01552
|
||||
sel_port-217: 1.1.sta00053
|
||||
sel_port-218: 1.1.sta01053
|
||||
sel_port-219: 1.1.sta00553
|
||||
sel_port-220: 1.1.sta01553
|
||||
sel_port-221: 1.1.sta00054
|
||||
sel_port-222: 1.1.sta01054
|
||||
sel_port-223: 1.1.sta00554
|
||||
sel_port-224: 1.1.sta01554
|
||||
sel_port-225: 1.1.sta00055
|
||||
sel_port-226: 1.1.sta01055
|
||||
sel_port-227: 1.1.sta00555
|
||||
sel_port-228: 1.1.sta01555
|
||||
sel_port-229: 1.1.sta00056
|
||||
sel_port-230: 1.1.sta01056
|
||||
sel_port-231: 1.1.sta00556
|
||||
sel_port-232: 1.1.sta01556
|
||||
sel_port-233: 1.1.sta00057
|
||||
sel_port-234: 1.1.sta01057
|
||||
sel_port-235: 1.1.sta00557
|
||||
sel_port-236: 1.1.sta01557
|
||||
sel_port-237: 1.1.sta00058
|
||||
sel_port-238: 1.1.sta01058
|
||||
sel_port-239: 1.1.sta00558
|
||||
sel_port-240: 1.1.sta01558
|
||||
sel_port-241: 1.1.sta00059
|
||||
sel_port-242: 1.1.sta01059
|
||||
sel_port-243: 1.1.sta00559
|
||||
sel_port-244: 1.1.sta01559
|
||||
sel_port-245: 1.1.sta00060
|
||||
sel_port-246: 1.1.sta01060
|
||||
sel_port-247: 1.1.sta00560
|
||||
sel_port-248: 1.1.sta01560
|
||||
sel_port-249: 1.1.sta00061
|
||||
sel_port-250: 1.1.sta01061
|
||||
sel_port-251: 1.1.sta00561
|
||||
sel_port-252: 1.1.sta01561
|
||||
sel_port-253: 1.1.sta00062
|
||||
sel_port-254: 1.1.sta01062
|
||||
sel_port-255: 1.1.sta00562
|
||||
sel_port-256: 1.1.sta01562
|
||||
sel_port-257: 1.1.sta00063
|
||||
sel_port-258: 1.1.sta01063
|
||||
sel_port-259: 1.1.sta00563
|
||||
sel_port-260: 1.1.sta01563
|
||||
show_events: 1
|
||||
show_log: 0
|
||||
port_sorting: 2
|
||||
kpi_id: WiFi Capacity
|
||||
bg: 0xE0ECF8
|
||||
test_rig:
|
||||
show_scan: 1
|
||||
auto_helper: 1
|
||||
skip_2: 0
|
||||
skip_5: 0
|
||||
batch_size: 1,5,10,20,40,80
|
||||
loop_iter: 1
|
||||
duration: 30000
|
||||
test_groups: 0
|
||||
test_groups_subset: 0
|
||||
protocol: TCP-IPv4
|
||||
dl_rate_sel: Total Download Rate:
|
||||
dl_rate: 1000000000
|
||||
ul_rate_sel: Total Upload Rate:
|
||||
ul_rate: 1000000000
|
||||
prcnt_tcp: 100000
|
||||
l4_endp:
|
||||
pdu_sz: -1
|
||||
mss_sel: 1
|
||||
sock_buffer: 0
|
||||
ip_tos: 0
|
||||
multi_conn: -1
|
||||
min_speed: -1
|
||||
ps_interval: 60-second Running Average
|
||||
fairness: 0
|
||||
naptime: 0
|
||||
before_clear: 5000
|
||||
rpt_timer: 1000
|
||||
try_lower: 0
|
||||
rnd_rate: 1
|
||||
leave_ports_up: 0
|
||||
down_quiesce: 0
|
||||
udp_nat: 1
|
||||
record_other_ssids: 0
|
||||
clear_reset_counters: 0
|
||||
do_pf: 0
|
||||
pf_min_period_dl: 128000
|
||||
pf_min_period_ul: 0
|
||||
pf_max_reconnects: 0
|
||||
use_mix_pdu: 0
|
||||
pdu_prcnt_pps: 1
|
||||
pdu_prcnt_bps: 0
|
||||
pdu_mix_ln-0:
|
||||
show_scan: 1
|
||||
show_golden_3p: 0
|
||||
save_csv: 0
|
||||
show_realtime: 1
|
||||
show_pie: 1
|
||||
show_per_loop_totals: 1
|
||||
show_cx_time: 1
|
||||
show_dhcp: 1
|
||||
show_anqp: 1
|
||||
show_4way: 1
|
||||
show_latency: 1
|
||||
|
||||
|
||||
Reference in New Issue
Block a user