Provide a valid ACPI path for coreboot's SSDT generators.
Fixes all ACPI errors found while booting GNU Linux 4.15 on
Lenovo T410.
Change-Id: Idd4986f39f21cb53cb019d0893d40fed94c6505b
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/26287
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
This commit fixes a bug where the base would not be powered after the
system was power cycled without disconnecting the base.
BUG=none
BRANCH=poppy
TEST=Flash nocturne; boot to S0, attach base, shutdown to S5. Boot to
S0, verify that base is powered.
Change-Id: Ia3de500afdc29cb601c1b5571cd3355711a3b368
Signed-off-by: Aseda Aboagye <aaboagye@google.com>
Reviewed-on: https://chromium-review.googlesource.com/1062993
Commit-Ready: Aseda Aboagye <aaboagye@chromium.org>
Tested-by: Aseda Aboagye <aaboagye@chromium.org>
Reviewed-by: Nicolas Boichat <drinkcat@chromium.org>
The vcu disable bit in efuse ipdisable register is valid
only if PL powered up so, consider PL powerup status for
determing EG/EV part. If PL is not powered up, display
EG/EV as a part of string. The PL powerup status will
be filled by pmufw based on PL PROGB status in the
9th bit of version field.This patch also used IPI
to get this info from pmufw instead of directly accessing
the registers. Accessing this info from pmufw using
IPI fixes the issue of PMUFW access denied error for
reading IPDISABLE register.
Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
This patch adds new API for processing secure images. This API
is used for authentication and decryption of secure images using
xilsecure in pmufw.
Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Existing code blocks each IPI send request in ipi_mb_notify()
function till pmu clears respective bit in ipi observation
register.
After sending PM_SYSTEM_SHUTDOWN request to PMU, PMU will
restart APU. While PMU is restarting APU, ATF is running out
of OCM, which can cause read/write hang from/to OCM.
There is no need to wait for notification from PMU in case
of SystemShutdown request in ATF, as APU is going to restart.
This patch fixes APU only restart issue.
Signed-off-by: Tejas Patel <tejasp@xilinx.com>
Acked-by: Wendy Liang <wendy.liang@xilinx.com>
This patch makes bitstream load blocking call and waits until
bitstream is loaded successfully or return with error.
Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Tested-by: Avesh Khan <aveshk@xilinx.com>
GET_CALLBACK_DATA function is not required now. IPI mailbox
can be used instead of GET_CALLBACK_DATA function.
Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
PMU IPI-1 is used for callbacks from PMU to master. Unsecure
master can also receive callbacks from PMU, so make PMU IPI-1
as non-secure.
All requests from master(s) to PMU would still go on PMU IPI-1
secure channel.
Signed-off-by: Rajan Vaja <rajanv@xilinx.com>
Remove includes of gic_common.h and string.h which
are not required.
Signed-off-by: Rajan Vaja <rajanv@xilinx.com>
Acked-by: Jolly Shah <jollys@xilinx.com>
Xilinx now requires the PMU FW when using ATF, so it doesn't make sense
to maintain checks for the PMU FW in ATF. This also means that cases
where ATF came up before the PMU FW (such as on QEMU) ATF will now hang
waiting for the PMU FW instead of aborting.
Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Use positive logic (pm_up instead of pm_down) to check whether PMU
services are available. This change also puts the variable into the
BSS section rather than the Data section as the variable is now
initialized to 0 rather than 1.
Signed-off-by: Will Wong <WILLW@xilinx.com>
Signed-off-by: Stefan Krsmanovic <stefan.krsmanovic@aggios.com>
Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
If we can't find the FSBL handoff struct don't panic and just use the
defaults instead.
We still print a warning to the user to let them know what we couldn't
find it.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Instead of calling panic() in fsbl_atf_handover() return the error
status so that bl31_early_platform_setup() can act accordingly.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Type "entry_point_info_t" is used in zynqmp_private.h. It is defined
in "bl_common.h". The header file which defines the type should be
included.
Signed-off-by: Wendy Liang <jliang@xilinx.com>
Added SHA to calculate SHA3 hash,RSA to encrypt data with
public key and decrypt with private key and AES to do symmetric
encryption with User key or device key.
Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Read ipdisable reg which needs to be used for cg/eg/ev device detection.
ATF runs in EL3 that's why this read can be done directly.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
This patch corrects the SVD mask for getting chip ID
using 0xe is wrong and 0x7 is correct.
Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
psci system_reset and system_off calls now retrieve shutdown scope on
the fly. The default scope is system, but it can be changed by calling
pm_system_shutdown(2, scope)
Until full support for different restart scopes becomes available with
PSCI 1.1 this change allows users to set the reboot scope to match
their application needs.
Possible scope values:
0 - APU subsystem: does not affect RPU, PMU or PL
1 - PS only: shutdown/restart entire PS without affecting PL
2 - System: shutdown/restart applies to entire system
Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Davorin Mista <davorin.mista@aggios.com>
The PM_INIT_FINALIZE PM API is required to inform the PFW that APU is
done with requesting nodes and that not-requested nodes can be powered
down. If PM is not enabled, this call will never be made and PFW will
never power down any of the nodes which APU can use.
Signed-off-by: Filip Drazic <filip.drazic@aggios.com>
This patch adds pm_secure_rsaaes() API to provide access to
the xilsecure library for loading secure images
Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Read boot mode register using pm_mmio_read if pmu is
present otherwise access it directly using mmio_read_32().
Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
The pm_req_wakeup PM API accepts start address (64-bit unsiged integer)
and a flag stating if address should be used. To save an argument
of the SMC call, flag is encoded in the LSB of the address, since
addresses are word aligned.
Decode start address and use-address flag in the PM SMC handler and
pass them to pm_req_wakeup.
Signed-off-by: Filip Drazic <filip.drazic@aggios.com>
Acked-by: Will Wong <willw@xilinx.com>
Call to pm_client_wakeup from pm_req_wakeup prevented the PM API
call to be used to wake up non-APU processor (e.g. from higher ELs),
since it clears power down request for specified APU processor.
Move this function out of pm_client_wakeup to allow passing wake up
requests to the PMU for other processor in the system.
Signed-off-by: Filip Drazic <filip.drazic@aggios.com>
Acked-by: Will Wong <willw@xilinx.com>
NODE_EXTERN is the slave node which represents an external wake
source.
Signed-off-by: Mirela Simonovic <mirela.simonovic@aggios.com>
Acked-by: Will Wong <willw@xilinx.com>
Beside standard suspend-to-RAM state, Zynq MPSoC supports
suspend-to-RAM state with additional power savings, called
power-off suspend-to-RAM. If this mode is set, only NODE_EXTERN
must be set as wake source. Standard suspend-to-RAM procedure
is unchanged.
This patch adds support for setting suspend mode from higher
ELs and ensuring that all conditions for power-off suspend mode
are set.
Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Filip Drazic <filip.drazic@aggios.com>
pm_get_node_status API function returns 3 values:
-status: Current power state of the node
-requirements: Current requirements for the node
-usage: Current usage of the node
The last two values only apply to slave nodes.
Signed-off-by: Anes Hadziahmetagic <anes.hadziahmetagic@aggios.com>
Signed-off-by: Filip Drazic <filip.drazic@aggios.com>
Acked-by: Will Wong <willw@xilinx.com>
Increase AP timeout limit for sgx_configure function. As per debug log
sgx_configure was not successful on all cores with given timeout value.
TEST=Ensures no timeout error in AP function execution.
Change-Id: Ia83f7a7eb6cd6c4808d55febfebe32724a633173
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/26286
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Caveh Jalali <caveh@google.com>
Make Esc+Refresh+Power on Grunt enter Recovery Mode.
If Power is released fast:
[0.045303 KB init state: -- 02 08 -- -- -- -- -- -- -- -- -- --]
Add CONFIG_KEYBOARD_IGNORE_REFRESH_BOOT_KEY to handle this case.
If Power is held longer:
[0.045448 KB init state: 08 0a 08 08 08 -- 08 -- 08 08 -- 08 08]
Add CONFIG_KEYBOARD_PWRBTN_ASSERTS_KSI3 to handle this case.
BUG=b:79758966
BRANCH=none
TEST=Esc+Refresh+Power gives recovery screen on Grunt
Change-Id: I43a7d485535ff7b0d9bfce59f28c0049ee989818
Signed-off-by: Edward Hill <ecgh@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/1063032
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
CPRINTS() macro is already adding the newline character, no need to
include it explicitly.
BRANCH=none
BUG=none
TEST=vefied that Coral EC does not print this newline any more
Change-Id: I1f6b1fcb90818a8d4a2d18cf5060669fc46d38a7
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/1062588
Reviewed-by: Jett Rink <jettrink@chromium.org>
When we exit DBGR mode on the ITE after flashing, it wedges the
SDA line, which prevents us from using dut-control cold_reset.
We do not need to exit DBGR mode since we will perform a cold reset
after we finish flashing.
BRANCH=none
BUG=b:79592483
TEST=flash bip multiple times and EC resets after flashing automatically
Change-Id: Iafbad7a88a528ec7385596fd7c674b151f276166
Signed-off-by: Jett Rink <jettrink@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/1060588
Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
The decimal converted value for i2c read does not work.
It just happens to work every other time I have seen it.
BUG=none
BRANCH=none
TEST=bip i2cxfer r works
Change-Id: I7d868e3fc79eea081867634b679120f2da6f9363
Signed-off-by: Jett Rink <jettrink@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/1060167
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Currently, field sizes are automatically set to the smallest size
which can fit a given value. This patch makes cbi-util allow field
sizes to be specified.
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
BUG=b:79514391
BRANCH=none
TEST=Tested as follows:
1. Create CBI image:
$ cbi-util create --file cbi.bin --board_version 0x202 \
--oem_id 0xabcd:2 --sku_id 0xff:4 --size 256
2. Verify the image:
$ cbi-util show --file cbi.bin
CBI image: /home/dnojiri/tmp/nami/tmp/cbi.new.bin
TOTAL_SIZE: 22
Data Field: name: value (hex, tag, size)
BOARD_VERSION: 514 (0x202, 0, 2)
OEM_ID: 43981 (0xabcd, 1, 2)
SKU_ID: 255 (0xff, 2, 4)
3. Verify the output matches with the previous output if field sizes
are not specified.
Change-Id: Ic7149274d6e4a118ea12bbf03199b548b7089a3e
Reviewed-on: https://chromium-review.googlesource.com/1056201
Commit-Ready: Daisuke Nojiri <dnojiri@chromium.org>
Tested-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
For Bip P0, we are using some of the Sanyo batteries. Need to add
support in battery.c/board.h so this battery is recognized and
battery disconnect and cutoff functions are supported.
BRANCH=none
BUG=b:79734977
TEST=Verfied Sanyo battery is found at EC init time and that 'cuttof'
EC console command works.
Change-Id: I4b69296869e1eed6248800eb4b7b3c35a79bae4c
Signed-off-by: Scott Collyer <scollyer@google.com>
Reviewed-on: https://chromium-review.googlesource.com/1059935
Commit-Ready: Scott Collyer <scollyer@chromium.org>
Tested-by: Scott Collyer <scollyer@chromium.org>
Reviewed-by: Jett Rink <jettrink@chromium.org>
Adding this config so that battery_get_disconnect_state() is called
directly as a condition in prevent_power_on instead of having this be
a condition battery_is_present. This change allows precharge current
to be sent to the battery when the battery is dead or recovering from
battery cutoff condition.
BRANCH=none
BUG=b:79133101
TEST=tested on Yorp and verfied that in both dead battery and battery
cutoff cases, the battery wakes up as expected.
Change-Id: Iefec578dd241ddb832630ffa2530ba7c631f9a96
Signed-off-by: Scott Collyer <scollyer@google.com>
Reviewed-on: https://chromium-review.googlesource.com/1053096
Commit-Ready: Scott Collyer <scollyer@chromium.org>
Tested-by: Scott Collyer <scollyer@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-by: Jett Rink <jettrink@chromium.org>
The ITE TCPC driver does not current support drp_toggle and so can't
have these config options defined. The driver method for drp_toggle is
set to NULL which causes the EC to reboot when power button is pressed
as that calls drp_toggle in the chipset hook.
BRANCH=none
BUG=b:79637786
TEST=Verfied that with these config options not defined the EC no
longer reboots when power button is pressed.
Change-Id: I08e27bb2541bac4fac52411d9c01a366b8874379
Signed-off-by: Scott Collyer <scollyer@google.com>
Reviewed-on: https://chromium-review.googlesource.com/1059580
Commit-Ready: Scott Collyer <scollyer@chromium.org>
Tested-by: Scott Collyer <scollyer@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-by: Jett Rink <jettrink@chromium.org>
This CL adds the port number to the error messages for the TI sn5330
PPC driver. It also adds 'ppc' so that its clear where the messages
are coming from.
BRANCH=none
BUG=b:79640678
TEST=Tested on Bip MLB and verfied that PPC EC console log errors
display the port number.
Change-Id: I7988e5e4008c005bb1ef9a78331d4a2597fdcb62
Signed-off-by: Scott Collyer <scollyer@google.com>
Reviewed-on: https://chromium-review.googlesource.com/1060105
Commit-Ready: Scott Collyer <scollyer@chromium.org>
Tested-by: Scott Collyer <scollyer@chromium.org>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
