Without this, the battery will discharge if we disallow battery
charging (e.g. calling charge_request with either voltage == 0 or
current == 0, either by policy, or when the battery is full).
Also update config.h to set the option whenever isl923x is used.
BRANCH=none
BUG=b:66575472
BUG=b:35585464
TEST=make buildall -j
Change-Id: Id5515d5ea82a393a3693a3da44cbdc2778296a95
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/856538
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
The decision on whether to ramp (and how high) depends on the quirks of
charger identification, so move the decision out of board, into the
drivers that implement usb_charger.
Also, rename CONFIG_CHARGE_RAMP to CONFIG_CHARGE_RAMP_SW, to better
contrast with the existing CONFIG_CHARGE_RAMP_HW.
BUG=None
TEST=Manual on kevin, verify ramp occurs when port plugged into Z840
workstation.
BRANCH=None
Change-Id: I5b395274133837a18a4f4ac34b59b623287be175
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/702681
Commit-Ready: Shawn N <shawnn@chromium.org>
Tested-by: Shawn N <shawnn@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Boards that use charge_manager have identical implementations of
typec_set_input_current_limit() and pd_set_input_current_limit(), so
move these functions to charge_manager.
BUG=b:67413505
TEST=`make buildall -j`, also verify that fizz continues to power-on and
boot AP, in both protected and unprotected mode, with barrel jack power
and with zinger.
BRANCH=None
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Change-Id: I99a5314d02c4696db944c0f8ac689405f4f1f707
Reviewed-on: https://chromium-review.googlesource.com/701412
Commit-Ready: Shawn N <shawnn@chromium.org>
Tested-by: Shawn N <shawnn@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Replace structure member "level" in power_signal_info with "flags".
"level" has been used on all boards to indicate active-high or
active-low levels. Addition of "flags" allows easy extension of
power_signal_info structure to define various flags that might be
applicable to power signals (e.g. "level"). Going forward, additional
flag will be added in follow-up CLs.
Also, provide a helper function power_signal_is_asserted that checks
the actual level of a signal and compares it to the flags level to
identify if a power signal is asserted.
BUG=b:65421825
BRANCH=None
TEST=make -j buildall
Change-Id: Iacaabd1185b347c17b5159f05520731505b824b8
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/679979
Reviewed-by: Nicolas Boichat <drinkcat@chromium.org>
SYSTEM_IMAGE_RW_B hasn't been globally treated as a RW copy.
This change makes EC treat it also as a RW copy.
BUG=none
BRANCH=none
TEST=make buildall
Change-Id: Iae5a9090cdf30f980014daca44cdf8f2a65ea1f2
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/656337
Reviewed-by: Randall Spangler <rspangler@chromium.org>
We can re-use our pd_log FIFO for other purposes, such as TPM logging.
Carve out event_log, a generic logging module which pd_log is compatible
with.
BUG=b:63760920
TEST=On kevin, verify PD logging is still functional and entries are
seen in dmesg.
BRANCH=None
Change-Id: I8e6ad6f93e9eebc676aca64652c60f81da471a94
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/597314
Commit-Ready: Shawn N <shawnn@chromium.org>
Tested-by: Shawn N <shawnn@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
The primary purpose of the Pericom PI3USB9281 is for BC1.2 detection.
Therefore, move the driver to the bc12/ directory.
Additonally, rename the config option to match.
CONFIG_USB_SWITCH_PI3USB9281 => CONFIG_BC12_DETECT_PI3USB9281
BUG=None
BRANCH=None
TEST=`make -j buildall`
Change-Id: I02f17064c0625e62d6779f895e69899c24898f74
Signed-off-by: Aseda Aboagye <aaboagye@google.com>
Reviewed-on: https://chromium-review.googlesource.com/594710
Commit-Ready: Aseda Aboagye <aaboagye@chromium.org>
Tested-by: Aseda Aboagye <aaboagye@chromium.org>
Reviewed-by: Shawn N <shawnn@chromium.org>
In order to ensure we are always meeting the deadlines for the IRQ_HPD
pulse, increase the priority of the processing by moving the rising edge
from the low-priority HOOK task (in a deferred function) to the caller
task (which is the high-priority PD task).
The downside is we are now sleeping in the PD task blocking the
processing of the PD messages during this time.
Changed HPD_DSTREAM_DEBOUNCE_IRQ to 500us instead of 750us. According
to DP spec, the IRQ_HPD pulse width is between 500us and 1000us.
Ensure there is a minimum of 2ms delay in between each IRQ_HPD as specified
by the DP spec, by sleeping before sending the next pulse if needed.
(in practice, this should not wait if we are not too off processing the
messages)
BUG=chromium:711334
BRANCH=glados strago reef oak
TEST=manual, on SKL platform with kernel 3.18 and MST, verify display is
functional on USB-C dock.
Change-Id: Ib2e9dd608c5f1c671cc5a0fd979a5742101375ff
Signed-off-by: Kevin K Wong <kevin.k.wong@intel.com>
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/508629
Reviewed-by: Todd Broch <tbroch@chromium.org>
Adds min_frequency and max_frequency to struct motion_sensor_t.
New attributes min_frequency and max_frequency are now returned in
ectool's MOTIONSENSE_CMD_INFO response.
Incremented ectool's MOTIONSENSE_CMD_INFO version to version 3.
Add constants for MIN_FREQUENCY and MAX_FREQUENCY to each sensor's
header file.
BRANCH=none
BUG=chromium:615059
TEST=build/boot and verify MOTIONSENSE_CMD_INFO response on kevin,
make buildall -j passes.
Change-Id: I66db9715c122ef6bb4665ad5d086a9ecc9c7c93a
Signed-off-by: Nick Vaccaro <nvaccaro@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/482703
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
Servo_v4 requires the ability to have a different default state per
port. In previous devices, the assumption was that each supported port
had the same default usb pd state and power role. This CL moves the
by the default power role which in turn is derived from
CONFIG_USB_PD_DUAL_ROLE. In addiiton to moving the location, it now
uses 'port' as argument so it can be port specific if required.
PD_DEFAULT_STATE was a board.h specific config, but in practice each
instance used to date was set to PD_STATE_SNK_DISCONNECTED if
CONFIG_USB_PD_DUAL_ROLE was defined and set to
PD_STATE_SRC_DISCONNECTED otherwise.
BUG=chrome-os-partner:61878
BRANCH=servo
TEST=Manual run 'make -j buildall' to verify that all instances of
PD_DEFAULT_STATE were removed.
Change-Id: Iaf40718668732f525485ed7942ee7fc246d3f75d
Signed-off-by: Scott <scollyer@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/431787
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
For oak, set a different list of task (no als, no accel) for compiling
revision 4 or less. Fix GPIO include issue.
BUG=chrome-os-partner:59423,chrome-os-partner:59084
TEST=compile for oak with board 4 and 5, tested on Reef.
BRANCH=kevin,reef
Change-Id: I09051a69cbad6d477a7b3bf9907f4c5c144b5136
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/424220
Reviewed-by: Randall Spangler <rspangler@chromium.org>
sensor private structure for bmi160 and bmp280 were defined
in the drivers themselves. It worked because there was only one
instance of each sensors on a board. However, this is an error it
should be in board files, as it was done for other sensors like the kionix.
BUG=none
TEST=buildall.
BRANCH=kevin,reef
Change-Id: Ica3aba358d141a7df9a3e97251d4c1e520cbf2c8
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/424218
Reviewed-by: Randall Spangler <rspangler@chromium.org>
If battery is not present, input current is set to PD_MAX_CURRENT_MA.
If the input power set is greater than the maximum allowed system power,
system might get damaged. Hence, limit the input current to meet maximum
allowed input system power.
BUG=chrome-os-partner:58498
BRANCH=none
TEST=Manually tested on Reef. Removed the battery & using 'charger'
console command observed the following.
With Zinger charger at 20V - Input current is set to 2.25A
With Type-C & other chargers - Input current is set to 3A
Change-Id: Ife8686f322e095aa74b740a7c469bfe87107fb9a
Signed-off-by: Vijay Hiremath <vijay.p.hiremath@intel.com>
Reviewed-on: https://chromium-review.googlesource.com/397865
Commit-Ready: Vijay P Hiremath <vijay.p.hiremath@intel.com>
Tested-by: Vijay P Hiremath <vijay.p.hiremath@intel.com>
Reviewed-by: Shawn N <shawnn@chromium.org>
charge_manager may request a charge current limit less than the
capability of the supply in certain cases (eg. during PD voltage
transition, to make an effort to comply with reduced load spec).
Depending on the battery / system state, setting a reduced charge
current limit may result in brownout.
Pass the uncapped / max negotiated current to board_set_charge_limit()
so that boards may use it instead of the requested limit in such
circumstances.
BUG=chrome-os-partner:56139
BRANCH=gru
TEST=Manual on kevin with subsequent commit, boot system with zinger +
low-charge battery, verify devices powers up to OS without brownout.
Change-Id: I2b8e0d44edcf57ffe4ee0fdec1a1ed35c6becbbd
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/383732
Commit-Ready: Shawn N <shawnn@chromium.org>
Tested-by: Shawn N <shawnn@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Not everything with a temperature sensor uses thermal throttling. This
change modifies the conditional build to enable building temp sensor
source without thermal throttling.
BUG=none
BRANCH=none
TEST=make buildall -j
Change-Id: I8c0753f12899e9f203c04477ae520bcda40d5fd8
Signed-off-by: Mary Ruthven <mruthven@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/356484
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
Added console commands for the debugging purpose
psys - Can be used to measure the system power
amonbmon - Can be used to measure AMON/BMON voltage diff, current
BUG=chrome-os-partner:54273
BRANCH=none
TEST=Manually tested on Amenia
psys - Ran fish task and observed psys value changes.
amonbmon - AMON & BMON voltage & current are same as measured
across sense resistors.
Change-Id: I6653e814d9b00efe7dae9ce1fbd7ddbc2356f8e0
Signed-off-by: Vijay Hiremath <vijay.p.hiremath@intel.com>
Reviewed-on: https://chromium-review.googlesource.com/353043
Commit-Ready: Vijay P Hiremath <vijay.p.hiremath@intel.com>
Tested-by: Vijay P Hiremath <vijay.p.hiremath@intel.com>
Reviewed-by: Shawn N <shawnn@chromium.org>
Previously CONFIG_USB_PD_TCPM_VBUS had two uses which were independent:
- When operating as a TCPC, it indicated that the VBUS level should be
tracked (through GPIO inputs) and sent to the external TCPM when
appropriate.
- When operating as a TCPM, it indicated that the VBUS level should be
obtained by querying the TCPC.
These two independent uses have been split into
CONFIG_USB_PD_TCPC_TRACK_VBUS and CONFIG_USB_PD_VBUS_DETECT_TCPC, which
sould be more clear.
In addition, CONFIG_USB_PD_VBUS_DETECT_* CONFIGs have been added for
other means of VBUS detection.
BUG=chromium:616580
BRANCH=None
TEST=Verify kevin continues to boot + charge.
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Change-Id: I936821481d6577e17e3e9c61ff97c037574d6923
Reviewed-on: https://chromium-review.googlesource.com/348950
Commit-Ready: Shawn N <shawnn@chromium.org>
Tested-by: Shawn N <shawnn@chromium.org>
Reviewed-by: Shawn N <shawnn@chromium.org>
Previously the maximum number of deferred routines was specified by the
the default maximum number of deferred routines you had to override
this, and if you wanted fewer, you still payed the price of having the
defer_until array statically allocated to be the maximum size.
This change removes that define and instead creates the RAM state of
the deferred routine (the time to wait until to call the deferred) when
the deferred is declared.
Signed-off-by: Anton Staaf <robotboy@chromium.org>
BRANCH=None
BUG=None
TEST=make buildall -j
manually test on discovery-stm32f072
Change-Id: Id3db84ee1795226b7818c57f68c1f637567831dc
Reviewed-on: https://chromium-review.googlesource.com/335597
Commit-Ready: Anton Staaf <robotboy@chromium.org>
Tested-by: Anton Staaf <robotboy@chromium.org>
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
Previously calls to hook_call_deferred were passed the function to call,
which was then looked up in the .rodata.deferred section with a linear
search. This linear search can be replaced with a subtract by passing
the pointer to the deferred_data object created when DECLARE_DEFERRED
was invoked.
Signed-off-by: Anton Staaf <robotboy@chromium.org>
BRANCH=None
BUG=None
CQ-DEPEND=CL:*255812
TEST=make buildall -j
Change-Id: I951dd1541302875b102dd086154cf05591694440
Reviewed-on: https://chromium-review.googlesource.com/334315
Commit-Ready: Bill Richardson <wfrichar@chromium.org>
Tested-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Use LARGER_TASK_STACK_SIZE to increase stack size to 640 bytes.
Check HOSTCMD stack usage with "taskinfo" command while running
the suspend/resume stress test.
8 R HOSTCMD 00000001 21.133553 496/640
It exceeds 488 bytes of TASK_STACK_SIZE.
BUG=chrome-os-partner:51773
BRANCH=none
TEST=enter "suspend_stress_test -i spi32766.0" in AP to do
suspend test. System won't do cold reboot which is cause by
"Stack overflow in HOSTCMD task!".
Change-Id: Ic5edebc6b77637ca2c648798398e3f24bc87ca27
Signed-off-by: YH Huang <yh.huang@mediatek.com>
Reviewed-on: https://chromium-review.googlesource.com/336593
Reviewed-by: Rong Chang <rongchang@chromium.org>
After a charger is attached, we may set a charge limit based upon BC1.2
or USB-C Rp before PD negotiation completes. Therefore, allow 2 seconds
for all negotiation to complete. Previously this behavior was implicit
when using SW charge ramp.
BUG=chrome-os-partner:51280
BRANCH=glados
TEST=Manual on chell. Insert stock charger, verify that it is detected
as TYPE_UNKNOWN until timeout.
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Change-Id: I52f02de46fa92b66a9fbaddb94a062310688f028
Reviewed-on: https://chromium-review.googlesource.com/334312
Commit-Ready: Shawn N <shawnn@chromium.org>
Tested-by: Shawn N <shawnn@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
On oak battery, when the battery is dead it reports 0 for desired
voltage, current, and state of charge. In this case we should allow
charging.
Added a CONFIG option for this that should be removed as soon as
the battery side is fixed.
With this CL, when a dead oak battery is used and a charger is
connected, we attempt to charge it.
BUG=chrome-os-partner:51454
BRANCH=none
TEST=test on an oak with a dead battery. w/o this CL, the battery
never charges because the charging not allowed flag is set. With this
CL, the battery charges.
Change-Id: If9f1250cd41aec265838e1d109f53c1bcd58c111
Signed-off-by: YH Huang <yh.huang@mediatek.com>
Reviewed-on: https://chromium-review.googlesource.com/334471
Reviewed-by: Rong Chang <rongchang@chromium.org>
CONFIG_PMIC_FW_LONG_PRESS_TIMER was ported long time ago from
Tegra, but the codes are actually not used and erroneous.
It might wrongly trigger set_pmic_pwron(0), and turn off
PMIC power accidentally. This causes POWER_GOOD lost and
power state will go back to S5 during boot up.
Clean up the codes by referencing check_for_power_off_event()
of Rockchip.
BRANCH=none
BUG=none
TEST=bootup and press power button quickly right after we are in S0.
Bootup should still complete normally.
Change-Id: Ie034efa3575dbebae4debb1afc206fddd9116350
Signed-off-by: Koro Chen <koro.chen@mediatek.com>
Reviewed-on: https://chromium-review.googlesource.com/332724
Reviewed-by: Rong Chang <rongchang@chromium.org>
Increase LED blink cycle time to reduce power consumption on Oak rev5
with GlaDOS ID.
BUG=chrome-os-partner:50317
TEST=`make EXTRA_CFLAGS=-DBOARD_REV=5 BOARD=oak -j`
Change-Id: Ic00512434965471a82b94ef431e0ec88c9e4c0c3
Reviewed-on: https://chromium-review.googlesource.com/332346
Commit-Ready: Wei-Ning Huang <wnhuang@chromium.org>
Tested-by: Wei-Ning Huang <wnhuang@chromium.org>
Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
rev5 battery LED control was misplaced in wrong function.
Move it back to oak_led_set_battery().
BRANCH=none
BUG=chrome-os-partner:49375
TEST=ectool led battery [green red off] are correct
Change-Id: I83bc24c7ea7695be2a638e97b7db6e0c38840a16
Signed-off-by: Koro Chen <koro.chen@mediatek.com>
Reviewed-on: https://chromium-review.googlesource.com/330509
Reviewed-by: Rong Chang <rongchang@chromium.org>
The base accelerometer on oak rev5 needs to be rotated 180 degrees
along the z-axis to match the standard reference frame.
BUG=chrome-os-partner:50312
BRANCH=none
TEST=manually rotate my oak rev5 and verify that `ectool motionsense`
reports correct accelerometer readings
Change-Id: I05a377b5f0827e2aad47d388dc3264d451580989
Signed-off-by: Ricky Liang <jcliang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/330484
Reviewed-by: Rong Chang <rongchang@chromium.org>
The default target hardware is rev5. This is a maintainess change for
old and deprecated HW.
BRANCH=none
BUG=chrome-os-partner:49114
BUG=chrome-os-partner:50720
TEST=manual
for N=1,5 do
make BOARD=oak clean && make BOARD=oak EXTRA_CFLAGS="-DBOARD_REV=$N" -j
Signed-off-by: Rong chang <rongchang@chromium.org>
Change-Id: Ibb4ebf9fab429964ace7c3e548598f0fb08e7dea
Reviewed-on: https://chromium-review.googlesource.com/330065
Commit-Ready: Rong Chang <rongchang@chromium.org>
Tested-by: Rong Chang <rongchang@chromium.org>
Reviewed-by: Wei-Ning Huang <wnhuang@chromium.org>
This change enables lid angle update that turns off keyboard scan in
tablet mode.
BRANCH=none
BUG=chrome-os-partner:49114
TEST=make BOARD=oak runtests
make BOARD=oak -j && make BOARD=oak_pd -j
load on oak and boot to vt2 console.
flip lid to disable range, type keyboard and check.
Signed-off-by: Rong Chang <rongchang@chromium.org>
Change-Id: Ibd2f0d6ae33a95380c9fc52a7568166a04c119e9
Reviewed-on: https://chromium-review.googlesource.com/328884
Reviewed-by: Wei-Ning Huang <wnhuang@chromium.org>
1. Muxer of USB C1 port changes to Parade PS8740.
2. Add control of DP switch TS3USB3000RSER, using for switch DP to port 0/1
(same as rev2).
3. LED control logic is same as rev2.
4. Updates GPIO setting for rev5 pinouts.
BUG=chrome-os-partner:49375
BRANCH=none
TEST=build -j buildall tests
Change-Id: Ifc45ac30be8d46caa1cdb032ccce7569e5a14b99
Signed-off-by: Ben Lok <ben.lok@mediatek.com>
Reviewed-on: https://chromium-review.googlesource.com/321024
Commit-Ready: Rong Chang <rongchang@chromium.org>
Tested-by: Rong Chang <rongchang@chromium.org>
Reviewed-by: Rong Chang <rongchang@chromium.org>
refer to commit d341615383,
adds the base accelerometer as well as the gyroscope to the list of
motion sensors on the board, connect with SPI bus. They are currently
wrapped behind an ifdef for HAS_TASK_MOTIONSENSE and OAK_REV5.
BUG=chrome-os-partner:50312
BRANCH=none
TEST=Build Oak EC with driver enabled and verify that we can calcuate
a valid lid angle.
TEST=Verify that signs of accelerometer conform to those shown in the
Chrome/Android/HTML5 doc/spec. See description in accelerometer_types.h
TEST=Verify that signs of gyroscope conform to those shown in the
"Sysfs interface to EC accelerometers" document.
TEST=make buildall tests
Change-Id: I4d900bc6bd7329db6ea53660fae86e5e2bbe9028
Signed-off-by: Ben Lok <ben.lok@mediatek.com>
Reviewed-on: https://chromium-review.googlesource.com/319295
Commit-Ready: Rong Chang <rongchang@chromium.org>
Tested-by: Rong Chang <rongchang@chromium.org>
Reviewed-by: Rong Chang <rongchang@chromium.org>
refer to commit 574c806571,
adds the lid accelerometer to the list of motion sensors on the rev5.
Since commit bc404c94b4,
math_util.c is no longer to include "math.h" header file.
BUG=chrome-os-partner:50312
BRANCH=none
TEST=Build Oak EC with driver enabled and verify that valid
accelerometer data is read, and that range, resolution, and odr can all
be modified.
TEST=Verified that signs of accelerometer data conform to those shown in
the doc.
TEST=make buildall tests
Change-Id: I8df1b2331a1fbea82015b97985541e2ebc393d10
Signed-off-by: Ben Lok <ben.lok@mediatek.com>
Reviewed-on: https://chromium-review.googlesource.com/319332
Commit-Ready: Rong Chang <rongchang@chromium.org>
Reviewed-by: Rong Chang <rongchang@chromium.org>
With commit e9883124ff, a GPIO_INT macro was added. That change
also required that all instances of GPIO_INT in a board's
gpio.inc file come before any GPIO macros, or the interrupt
handler wouldn't work properly.
This CL just adds a warning comment about requirement to all
gpio.inc files.
BUG=chromium:471331
BRANCH=none
TEST=make buildall, test image on Cr50
This is a change to comments only. There is no new behavior to
verify, although I did run try out one new image just to be sure
nothing stupid happened.
Change-Id: I83f7819929a53bce3a8bae04d15b3ee3bda11738
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/329334
Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Previously these were often done in board.c files, which made it
impossible to include the gpio.inc anywhere else. As part of
refactoring the GPIO code we now need to be able to include gpio.inc
from common/gpio.c. Moving these defines into gpio.inc makes them
available wherever gpio.inc is included.
Signed-off-by: Anton Staaf <robotboy@chromium.org>
BRANCH=None
BUG=None
TEST=make buildall -j
Change-Id: I28e7b5a1d40b113ae824b18f020b2d1e51e0c08a
Reviewed-on: https://chromium-review.googlesource.com/328822
Commit-Ready: Anton Staaf <robotboy@chromium.org>
Tested-by: Anton Staaf <robotboy@chromium.org>
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
if CONFIG_USB_PD_TCPM_VBUS is enabled, a race condition may happen:
In function pd_set_input_current_limit() and typec_set_input_current_limit(),
EC may notify AP power change event before PD send the up-to-date
POWER_STATUS TCPC alert to EC. It will cause the AP get the stale power
status. Move the power change event notification to board_set_charge_limit(),
it will be called after EC receives POWER_STATUS TCPC alert, and sending
power change event notification only if the "charge limit" or "charge port"
or supplier is changed.
BUG=chrome-os-partner:48801
BRANCH=none
TEST=make buildall -j; Tested on Oak by plug/unplug AC adapter to
type-C ports and verify the UI battery icon shows the correct status
instantly.
Change-Id: I52f0e268fdebc45e609d843847540ae48cd0a9eb
Signed-off-by: Ben Lok <ben.lok@mediatek.com>
Reviewed-on: https://chromium-review.googlesource.com/320066
Reviewed-by: Rong Chang <rongchang@chromium.org>
For TCPMs with an off chip TCPC, PD MCU host event status can be handled
in a common way. When a status flag is updated (ex. from
charge_manager), notify the AP through the host event, and save the
status flag for later retrieval.
BUG=chrome-os-partner:49124
BRANCH=None
TEST=Verify `cat /sys/class/power_supply/CROS_USB_PD_CHARGER1/online` on
chell reflects the actual online status of the charger. Also verify UI
charge icon tracks the online status correctly.
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Change-Id: I63bc70205627474590e38ffd282faedaea3bcc66
Reviewed-on: https://chromium-review.googlesource.com/320796
Commit-Ready: Shawn N <shawnn@chromium.org>
Tested-by: Shawn N <shawnn@chromium.org>
Reviewed-by: Benson Leung <bleung@chromium.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Stack of PDCMD task may be overflow during plug/unplug stree test
with Apple's AV Multiport Adapter. Enlarge the stack size to avoid
system reboot.
BUG=chrome-os-partner:47728
BRANCH=none
TEST=Manual
1.Connect DUT to sink monitor via HDMI dongle.
2.Unplug HDMI USB from DUT side.
3.Plug HDMI USB cable to DUT USB socket.
4.Repeat (Plug and unplug) USB from DUT for 10 times.
Change-Id: Ib6a1fbd0a552b2c6d4656c12554e1306c21adb8a
Signed-off-by: Ben Lok <ben.lok@mediatek.com>
Reviewed-on: https://chromium-review.googlesource.com/315020
Reviewed-by: Alec Berg <alecaberg@chromium.org>
