Nearly every board had a buttons array defined in which its contents had
the standard volume buttons. This commit creates a single common
buttons array that can contain the standard volume buttons and recovery
buttons. If a board has volume up and down buttons, they can simply
define CONFIG_VOLUME_BUTTONS and it will populate the buttons array with
the standard definition. The buttons are active low and have a 30 ms
debounce period. Similiarly, if a board has a dedicated recovery
button, defining CONFIG_DEDICATED_RECOVERY_BUTTON will also populate the
buttons array with a recovery button.
BUG=chromium:783371
BRANCH=None
TEST=make -j buildall.
TEST=Flash a device with CONFIG_VOLUME_BUTTONS, verify pressing volume
buttons still work.
Change-Id: Ie5d63670ca4c6b146ec8ffb64d40ea9ce437b913
Signed-off-by: Aseda Aboagye <aaboagye@google.com>
Reviewed-on: https://chromium-review.googlesource.com/773794
Commit-Ready: Aseda Aboagye <aaboagye@chromium.org>
Tested-by: Aseda Aboagye <aaboagye@chromium.org>
Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-by: Shawn N <shawnn@chromium.org>
Implement the following required features in the USB PD Rev. 3.0
specification.
Not_supported control message: Inform a port partner that a
particular message is not supported.
Battery capabilities extended message: Report battery design
capacity and last full charge capacity.
Battery status data message: Report battery state of charge
Collision avoidance: New scheme to avoid collisions caused when both
source and sink want to send messages.
Cable communication: Only the VCONN source can communicate with the
cable plug. This is NOT implemented because although the drivers have
the capability of communicating with a cable plug, the PD stack doesn't
currently need to talk to a cable plug. This is okay since the current
PD design doesn't source or sink more than 3 amps and all Type-C cables
are required to be 3 amp capable.
BUG=b:64411727
BRANCH=None
TEST=`make -j buildall`
Passed relevant PD Rev 2.0 compliance tests
Successful PD negotiation with PD Rev 2.0 and 3.0 chargers
Tested with low power none PD charger.
Modified a Kevin to operate as a PD 3.0 charger and sent
all required messages and verified the return messages.
Also tested collision avoidance by verifying that a sink only
transmits when the source indicates it's okay.
Used Twinkie to verify that PD was operating as v3.0.
Signed-off-by: Sam Hurst <shurst@chromium.org>
Change-Id: Ifd77e92ec4e9106236f9221393d2bfb97263d979
Reviewed-on: https://chromium-review.googlesource.com/603003
Commit-Ready: Sam Hurst <shurst@google.com>
Tested-by: Sam Hurst <shurst@google.com>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
The decision on whether to ramp (and how high) depends on the quirks of
charger identification, so move the decision out of board, into the
drivers that implement usb_charger.
Also, rename CONFIG_CHARGE_RAMP to CONFIG_CHARGE_RAMP_SW, to better
contrast with the existing CONFIG_CHARGE_RAMP_HW.
BUG=None
TEST=Manual on kevin, verify ramp occurs when port plugged into Z840
workstation.
BRANCH=None
Change-Id: I5b395274133837a18a4f4ac34b59b623287be175
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/702681
Commit-Ready: Shawn N <shawnn@chromium.org>
Tested-by: Shawn N <shawnn@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Enable necessary flags for the Cr50 to start supporting RMA
authentication. This also requires that the RMA server public key
definition is split between the actual and test. Even though they are
the same at this time, the actual public key would be defined in the
new future and it would be different from the test key.
BRANCH=cr50
BUG=b:65253310
TEST=make buildall -j passes. More tests were conducted on the full
patchset.
Change-Id: I5a3f9d8c71374d78192e3f0a2752391b842da962
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/691554
Reviewed-by: Randall Spangler <rspangler@chromium.org>
The new vendor command operates in two modes: when received with a
zero size payload, it triggers the Cr50 to generate a new RMA
authentication challenge and the expected authentication code value.
When receive with the payload, it compares the received payload with
the pre-calculate authentication code, and returns to the host the
comparison result (passed/not passed).
A care is taken not to accept payload until at least there is a valid
calculated auth code present (to avoid reporting a match on a payload
of all zeros).
Test config needed to be modified to allow compiling of the ccprintf
wrapper.
BRANCH=cr50
BUG=b:37952913
TEST=with the rest of the patches applied observed expected behavior
of generating challenge/response and verifying the auth code.
Change-Id: I30638b0ceef68830565f222dd1f4af17cfc8d7ef
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/690992
To implement rtc driver for some ec chips, we
need to convert between calandar date and seconds
(since epoch time, 01-01-1970 00:00:00).
Sicne these functions are HW-independent, let's add
common/rtc.c, include/rtc.h, and unit test for this.
BUG=b:63908519
BRANCH=none
TEST=make buildall test -j
Change-Id: Icb1e768d2b3674d5225b83e09475e984eb104d06
Signed-off-by: Philip Chen <philipchen@google.com>
Reviewed-on: https://chromium-review.googlesource.com/666985
Commit-Ready: Philip Chen <philipchen@chromium.org>
Tested-by: Philip Chen <philipchen@chromium.org>
Reviewed-by: Shawn N <shawnn@chromium.org>
Reviewed-by: Brian Norris <briannorris@chromium.org>
This patch moves the code which can be shared with other data
verification schemes (e.g. RWSIG) under common/vboot. It also
adds unit tests for it.
BUG=b:38462249
BRANCH=none
TEST=make run-vboot. Verify verification succeeds on Fizz.
Change-Id: Icab4d96dd2c154a12b01c41ebe9b46286b4b590e
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/563463
Reviewed-by: Randall Spangler <rspangler@chromium.org>
RMA auth uses X25519 to generate a relatively small challenge and
response.
Currently, nothing calls the rma_auth code. We'll need console and
TPM vendor commands to do so.
BUG=b:37952913
BRANCH=none
TEST=make buildall
Change-Id: Iec7f2d0e3dc8243f79b009ead16bb3ba9f1bef9d
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/544184
Base32 encoding is used to turn the RMA reset binary
challenge/response into less-typo-prone text, at 5 bits per character.
BUG=b:37952913
BRANCH=none
TEST=make runtests
Change-Id: I474750a20204ba353cea1e91982aa03e8071c0c2
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/544177
Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
This commit enables the use of the nvmem vars module. The console lock
state is migrated from using the long life scratch register, to nvmem
vars instead which will persist across power on reboots.
BUG=b:35586145
BRANCH=None
TEST=Flash a dev image. Lock the console. Remove all power from the
system. Power on system and verify that console is still locked.
Unlock the console, remove power from the system, power on the system,
verify that the console is now unlocked.
TEST=Repeat the above test, but using the nvtestvar console command
instead.
Change-Id: I03a2098bb0017cfca59889457a332eafb0e95db6
Signed-off-by: Aseda Aboagye <aaboagye@google.com>
Reviewed-on: https://chromium-review.googlesource.com/445804
Commit-Ready: Aseda Aboagye <aaboagye@chromium.org>
Tested-by: Aseda Aboagye <aaboagye@chromium.org>
Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Keep only the most compact version of the curve25519 code
and remove the remaining unused code for easier compilation.
Do the minimal changes to make it compile in the EC code base,
there should be no real functional changes.
Re-use the wording from BoringSSL include/openssl/curve25519.h for the
header.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BRANCH=none
BUG=chrome-os-partner:62991
TEST=run x25519 on host (ie 'make run-x25519')
and the STM32L4 target:
make BOARD=eve_fp PROJECT=x25519 TEST_BUILD=y
./util/flash_ec --board=eve_fp --image=build/eve_fp/x25519.bin
execute 'runtest' in the console.
Change-Id: I13dbe453eff39b461effb1b3ffa549afc1749fef
Reviewed-on: https://chromium-review.googlesource.com/444187
Commit-Ready: Vincent Palatin <vpalatin@chromium.org>
Tested-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Adam Langley <agl@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
usbpd1 futility image type is deprecated and should not be used for
new designs. This adds proper support for rwsig image type.
Key and signatures are added at linker stage step (futility cannot
directly create such signed images). Thanks to VB21 header, rwsig.c
can now tell how many bytes of the RW image need to be
cryptographically verified, and ensure that the rest is blank (0xff).
BRANCH=none
BUG=chromium:690773
TEST=make BOARD=hammer; flash, RW image is verified correctly.
TEST=make runtests -j
TEST=For the rest of the tests:
Change config option to CONFIG_RWSIG_TYPE_RWSIG
TEST=make BOARD=hammer; flash, hammer still verifies correctly.
TEST=cp build/hammer/ec.RW.bin build/hammer/ec.RW.bin.orig;
futility sign --type rwsig --prikey build/hammer/key.vbprik2 \
build/hammer/ec.RW.bin
diff build/hammer/ec.RW.bin build/hammer/ec.RW.bin.orig
=> Same file
TEST=Add CONFIG_CMD_FLASH, flashwrite 0x1e000, reboot, EC does
not verify anymore.
TEST=dump_fmap build/hammer/ec.bin shows KEY_RO and SIG_RW at
correct locations.
Change-Id: I50ec828284c2d1eca67fa8cbddaf6f3b06606c82
Reviewed-on: https://chromium-review.googlesource.com/441546
Commit-Ready: Nicolas Boichat <drinkcat@chromium.org>
Tested-by: Nicolas Boichat <drinkcat@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
All boards have been transitioned to charge_state_v2.c
So charge_state_v1.c, HOOK_CHARGE_STATE_CHANGE, and
CONFIG_CHARGER_TIMEOUT_HOURS can be removed
BUG=chrome-os-partner:36272
TEST=make -j buildall
BRANCH=none
Change-Id: I3f20c5198ea75185f9894deb792575a1be31432a
Reviewed-on: https://chromium-review.googlesource.com/435467
Commit-Ready: Sam Hurst <shurst@google.com>
Tested-by: Sam Hurst <shurst@google.com>
Reviewed-by: Shawn N <shawnn@chromium.org>
With introduction of encryption it is becoming impossible to read
NVMEM contents directly from flash. Decrypting the contents each time
there is a read request creates a significant performance hit. NVMEM
needs to be rearchitecture such that there is no need to run
decryption each time NVMEM read is performed.
This patch does just that, implementation details are described in the
header comment in common/nvmem.c.
To reduce memory impact the size of NVMEM is being decreased from 16K
to 12K. This is acceptable because eviction objects stored in NVMEM
serialized now, which dramatically reduces NVMEM size requirements.
The TPM2 NVMEM size definition must be kept in sync.
Another optimization this change introduces is bypassing writing into
the flash if NVMEM contents did not change, which is verified by
examining the hash of the cached storage.
A test is added to verify that the new commit scheme works as
expected, and the nvmem test is re-introduced to the list of test ran
on each 'make buildall'.
CQ-DEPEND=CL:433839
BRANCH=none
BUG=chrome-os-partner:62260,chrome-os-partner:62421
BUG=chrome-os-partner:62437
TEST=ran the following tests, all succeeded
make buildall -j
TEST_LIST_HOST=nvmem make runtests
tcg test suite
corp enroll on reef, reboot a few times, verify that enrollment sticks
Change-Id: I177daa3ceb4fd7aac299ca26b4506b863e31b946
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/433184
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
In Sink mode, on the receipt of a GotoMin message,
reduce the current consumption to some minimum level.
BUG=chrome-os-partner:33688
TEST=Manual testing
Used a Kevin, with test routine, to test GotoMin feature
on another Kevin unit.
Test routine:
if (!strcasecmp(argv[2], "gm")) {
ccprintf("send goto min\n");
send_control(port, PD_CTRL_GOTO_MIN);
send_control(port, PD_CTRL_PS_RDY);
}
Kevin with GotoMin feature:
# ectool usbpdpower 0
Port 0: SNK DRP PD 4277mV / 3000mA, max 5000mV / 3000mA / 15000mW
Port 1: Disconnected
After Test routine is executed:
# ectool usbpdpower 0
Port 0: SNK DRP PD 4906mV / 500mA, max 5000mV / 500mA / 2500mW
Port 1: Disconnected
BRANCH=none
Change-Id: Iaac6e19706ceb10ccaff4d602d63fc086c808c8f
Reviewed-on: https://chromium-review.googlesource.com/425728
Commit-Ready: Sam Hurst <shurst@google.com>
Tested-by: Sam Hurst <shurst@google.com>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Use binary search in host command lookup dispatcher
BUG=chromium:570895
TEST=manual testing on kevin
- Kevin boots
- ectool hello
make buildall -j
Verify *.smap hcmds section is sorted:
BOARD with host commands and private host commands
0004d0ec R __hcmds
0004d0ec R __host_cmd_0x00000x0000
0004d0f8 R __host_cmd_0x00000x0001
0004d104 R __host_cmd_0x00000x0002
0004d110 R __host_cmd_0x00000x0003
0004d11c R __host_cmd_0x00000x0004
0004d128 R __host_cmd_0x00000x0005
0004d134 R __host_cmd_0x00000x0007
0004d140 R __host_cmd_0x00000x0008
0004d14c R __host_cmd_0x00000x000a
0004d158 R __host_cmd_0x00000x000d
0004d164 R __host_cmd_0x00000x0010
0004d170 R __host_cmd_0x00000x0011
0004d17c R __host_cmd_0x00000x0012
0004d188 R __host_cmd_0x00000x0013
0004d194 R __host_cmd_0x00000x0015
0004d1a0 R __host_cmd_0x00000x0016
0004d1ac R __host_cmd_0x00000x0017
0004d1b8 R __host_cmd_0x00000x0087
0004d1c4 R __host_cmd_0x00000x008c
0004d1d0 R __host_cmd_0x00000x008f
0004d1dc R __host_cmd_0x00000x0092
0004d1e8 R __host_cmd_0x00000x0093
0004d1f4 R __host_cmd_0x00000x0097
0004d200 R __host_cmd_0x00000x0098
0004d20c R __host_cmd_0x00000x00b6
0004d218 R __host_cmd_0x00000x00d2
0004d224 R __host_cmd_0x00000x00d3
0004d230 R __host_cmd_0x3E000x0000
0004d23c R __host_cmd_0x3E000x0002
0004d248 R __evt_src_EC_MKBP_EVENT_HOST_EVENT
0004d248 R __hcmds_end
BOARD with host commands only
100bc888 R __hcmds
100bc888 R __host_cmd_0x00000x0000
100bc894 R __host_cmd_0x00000x0001
100bc8a0 R __host_cmd_0x00000x0002
100bc8ac R __host_cmd_0x00000x0003
100bc8b8 R __host_cmd_0x00000x0004
100bc8c4 R __host_cmd_0x00000x0005
100bc8d0 R __host_cmd_0x00000x0006
100bc8dc R __host_cmd_0x00000x0007
100bc8e8 R __host_cmd_0x00000x0008
100bc8f4 R __host_cmd_0x00000x0009
100bc900 R __host_cmd_0x00000x000a
100bc90c R __host_cmd_0x00000x000b
100bc918 R __host_cmd_0x00000x000d
100bc924 R __host_cmd_0x00000x0010
100bc930 R __host_cmd_0x00000x0011
100bc93c R __host_cmd_0x00000x0012
100bc948 R __host_cmd_0x00000x0013
100bc954 R __host_cmd_0x00000x0015
100bc960 R __host_cmd_0x00000x0016
100bc96c R __host_cmd_0x00000x0017
100bc978 R __host_cmd_0x00000x0025
100bc984 R __host_cmd_0x00000x0026
100bc990 R __host_cmd_0x00000x0029
100bc99c R __host_cmd_0x00000x002a
100bc9a8 R __host_cmd_0x00000x002b
100bc9b4 R __host_cmd_0x00000x002c
100bc9c0 R __host_cmd_0x00000x0044
100bc9cc R __host_cmd_0x00000x0045
100bc9d8 R __host_cmd_0x00000x0046
100bc9e4 R __host_cmd_0x00000x0047
100bc9f0 R __host_cmd_0x00000x0061
100bc9fc R __host_cmd_0x00000x0062
100bca08 R __host_cmd_0x00000x0064
100bca14 R __host_cmd_0x00000x0065
100bca20 R __host_cmd_0x00000x0067
100bca2c R __host_cmd_0x00000x0087
100bca38 R __host_cmd_0x00000x008c
100bca44 R __host_cmd_0x00000x008d
100bca50 R __host_cmd_0x00000x008f
100bca5c R __host_cmd_0x00000x0092
100bca68 R __host_cmd_0x00000x0093
100bca74 R __host_cmd_0x00000x0096
100bca80 R __host_cmd_0x00000x0097
100bca8c R __host_cmd_0x00000x0098
100bca98 R __host_cmd_0x00000x0099
100bcaa4 R __host_cmd_0x00000x009e
100bcab0 R __host_cmd_0x00000x00a0
100bcabc R __host_cmd_0x00000x00a1
100bcac8 R __host_cmd_0x00000x00a8
100bcad4 R __host_cmd_0x00000x00a9
100bcae0 R __host_cmd_0x00000x00b6
100bcaec R __host_cmd_0x00000x00b7
100bcaf8 R __host_cmd_0x00000x00d2
100bcb04 R __host_cmd_0x00000x00d3
100bcb10 R __host_cmd_0x00000x00db
100bcb1c R __host_cmd_0x00000x0101
100bcb28 R __host_cmd_0x00000x0102
100bcb34 R __host_cmd_0x00000x0103
100bcb40 R __host_cmd_0x00000x0104
100bcb4c R __host_cmd_0x00000x0110
100bcb58 R __host_cmd_0x00000x0111
100bcb64 R __host_cmd_0x00000x0112
100bcb70 R __host_cmd_0x00000x0113
100bcb7c R __host_cmd_0x00000x0114
100bcb88 R __host_cmd_0x00000x0115
100bcb94 R __host_cmd_0x00000x0116
100bcba0 R __host_cmd_0x00000x0117
100bcbac R __host_cmd_0x00000x0118
100bcbb8 R __host_cmd_0x00000x011a
100bcbc4 R __evt_src_EC_MKBP_EVENT_KEY_MATRIX
100bcbc4 R __hcmds_end
BRANCH=none
Change-Id: I5d13d2a7fe7fa9a0fbeed43177cc612f572a58bb
Reviewed-on: https://chromium-review.googlesource.com/419702
Commit-Ready: Sam Hurst <shurst@google.com>
Tested-by: Sam Hurst <shurst@google.com>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Reviewed-by: Shawn N <shawnn@chromium.org>
The new code allows to replace the existing one buffer at a time
shared memory facility with a malloc/free implementation. A new
configuration option is being provided (CONFIG_MALLOC).
The names of functions allocating and freeing memory are not being
changed to allow to switch between the two implementations seamlessly.
A double linked list of buffers is used to keep track of free and
allocated memory. During initialization the entire free memory block
is considered a single free buffer. No allocations/frees are allowed
from within interrupts. The control structures are protected by a
semaphore, so allocate and free invocation could be blocking.
A test is added which randomly allocates and frees memory, continuing
until all branches in the allocate and free functions are taken.
BUG=chrome-os-partner:
TEST=make buildall -j succeeds, which includes testing the new
malloc/free implementation.
Change-Id: I5e71c0190c6c247ec73bb459f66a6d7a06e3d248
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/420466
Reviewed-by: Randall Spangler <rspangler@chromium.org>
The CONFIG_FLASH_NVMEM option implements persistent, reliable storage
regions in flash. This adds CONFIG_FLASH_NVMEM_VARS, which uses one of
those storage regions for free-form variables.
Refer to the comments in include/nvmem_vars.h and common/nvmem_vars.c
for usage and implementation details.
BUG=chrome-os-partner:61107
BRANCH=none
TEST=make runtests
This CL includes a number of new tests, specifically for this feature.
No target boards use this feature yet so there's nothing to test on
actual hardware, but the test/nvmem_vars executable includes console
commands ("get", "set", "print") to try it out.
Change-Id: I8597415dc3b00a1462f5b164eeb5073129030525
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/414194
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Simple API to set/get the tablet mode. It can be set via lid angle
calculation or if a board has a dedicated HAL sensor/GPIO.
Merged from glados branch, add MKBP switch support.
BUG=chromium:606718
BRANCH=gru
TEST=Check with Cave that both mode works.
Reviewed-on: https://chromium-review.googlesource.com/402089
Reviewed-by: Shawn N <shawnn@chromium.org>
(cherry picked from commit c940f36ceabcf2425284001298f03ebdb4c3079e)
Change-Id: I2ee5130f3e0a1307ec3ea543f7a32d66bc32b31d
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/404915
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
Using the lid angle, detect if we are in tablet mode or not.
We are in tablet mode when the lid angle is large enough:
tablet_mode:
1 | +-----<----+----------
| \/ /\
| | |
0 |------------------------>----+
+------------------+----------+----------+ lid angle
0 240 300 360
BRANCH=kevin
BUG=chrome-os-partner:55702,b:27849483
TEST=Check on Kevin event are sent on tablet mode transition.
Change-Id: Id9935ce4dd717e2c20fa6c9520defb504a1760d9
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/383073
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
When lid is closed, the lid angle can move to 358, 360, 0, 359 ...
Prevent transition 0 from/to 360 by keeping the last calculated value.
BRANCH=kevin
BUG=chrome-os-partner:55702
TEST=Check transition does not happen anymore.
Change-Id: Ifa8415470f425c893e2c3662c84c8fd0156e0524
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/373040
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
TPM2.0 needs more NvMem space and currently the whole block is
contiguous in memory with 2 partitions. This CL removes the
requirement that the partitions are in contiguous which allows for 1
partition to placed at top of RW_A and the other at RW_B.
This CL does not change the size of each partition as that will be
done in a subsequent CL.
BRANCH=none
BUG=chrome-os-partner:56798
TEST=manual
Tested with the unit test 'make runtests TEST_LIST_HOST=nvmem' and
verified that all tests pass.
Tested on Kevin, erased the existing NvMem area and verified that TPM
was still manufactured and executed the command: trunks_client --own
Erased parition 0 and 1 in the new locations and repeated the tests.
Change-Id: I295441f94dccdf5a152c32603c2638ffac23f471
Signed-off-by: Scott <scollyer@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/378675
Commit-Ready: Bill Richardson <wfrichar@chromium.org>
Tested-by: Bill Richardson <wfrichar@chromium.org>
Tested-by: Scott Collyer <scollyer@chromium.org>
Tested-by: Andrey Pronin <apronin@chromium.org>
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
CONFIG_POWER_TRACK_HOST_SLEEP_STATE has a dependency on
CONFIG_POWER_COMMON, so remove it from test builds that don't have a
chipset task, rather than heavy-handedly removing it from all test
builds.
BUG=chrome-os-partner:56197
BRANCH=None
TEST=`make BOARD=gru tests`
Change-Id: I86e20b4dccbb01ee285054a47093d6f60abc2166
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/378119
Commit-Ready: Shawn N <shawnn@chromium.org>
Tested-by: Shawn N <shawnn@chromium.org>
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
Currently, the matrix keyboard protocol does not have support for
handling non-matrixed keys. This commit adds support for buttons which
do not appear in the keyboard matrix as well as switches.
Additionally, the keyboard FIFO is now just a general MKBP events FIFO
which MKBP events are free to use. Now, buttons and switches wil join
the key matrix event.
BUG=chrome-os-partner:54988
BUG=chrome-os-partner:54976
BUG=chromium:626863
BRANCH=None
TEST=Flash kevin, and verify that keyboard is still functional.
TEST=make -j buildall
CQ-DEPEND=CL:358926
Change-Id: If4ada904cbd5d77823a0710d4671484b198c9d91
Signed-off-by: Aseda Aboagye <aaboagye@google.com>
Reviewed-on: https://chromium-review.googlesource.com/358633
Commit-Ready: Aseda Aboagye <aaboagye@chromium.org>
Tested-by: Aseda Aboagye <aaboagye@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Not everything with a temperature sensor uses thermal throttling. This
change modifies the conditional build to enable building temp sensor
source without thermal throttling.
BUG=none
BRANCH=none
TEST=make buildall -j
Change-Id: I8c0753f12899e9f203c04477ae520bcda40d5fd8
Signed-off-by: Mary Ruthven <mruthven@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/356484
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
Full implementation of NvMem read, write, and commit functions.
Includes partition definitions, shared memory allocation, and
initialization function.
Includes a set of unit tests located in ec/test/nvmem.c which
verify functionality.
This module is required by Cr50, however this CL does not
include any Cr50 specific code.
BUG=chrome-os-partner:44745
BRANCH=none
TEST=manual
make runtests TEST_LIST_HOST=nvmem and verify that all tests pass
Change-Id: I515b094f2179dbcb75dd11ab5b14434caad37edd
Signed-off-by: Scott <scollyer@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/345632
Commit-Ready: Scott Collyer <scollyer@chromium.org>
Tested-by: Scott Collyer <scollyer@chromium.org>
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
For TCPMs with an off chip TCPC, PD MCU host event status can be handled
in a common way. When a status flag is updated (ex. from
charge_manager), notify the AP through the host event, and save the
status flag for later retrieval.
BUG=chrome-os-partner:49124
BRANCH=None
TEST=Verify `cat /sys/class/power_supply/CROS_USB_PD_CHARGER1/online` on
chell reflects the actual online status of the charger. Also verify UI
charge icon tracks the online status correctly.
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Change-Id: I63bc70205627474590e38ffd282faedaea3bcc66
Reviewed-on: https://chromium-review.googlesource.com/320796
Commit-Ready: Shawn N <shawnn@chromium.org>
Tested-by: Shawn N <shawnn@chromium.org>
Reviewed-by: Benson Leung <bleung@chromium.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Some chips previously defined CONFIG_I2C and others didn't. Standardize
the usage by removing CONFIG_I2C from all config_chip files and force it
to be defined at the board level. Also, make boards define
CONFIG_I2C_MASTER and/or CONFIG_I2C_SLAVE based on the I2C interfaces
they will use - this will assist with some later cleanup.
BUG=chromium:550206
TEST=`make buildall -j`
BRANCH=None
Change-Id: I2f0970e494ea49611abc315587c7c9aa0bc2d14a
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/310070
Commit-Ready: Shawn N <shawnn@chromium.org>
Tested-by: Shawn N <shawnn@chromium.org>
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Enable USB PD logging.
BUG=chrome-os-partner:45933
BRANCH=none
TEST=make -j buildall
make -j BOARD=glados tests
Load on glados and test that PDLOG events show up in dmesg
Change-Id: I61dbc5019ea3228542c2c244228bbb483cf51ead
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/309881
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
When ALS is enabled, if light is around one threshold (say 40 lux),
the lightbar will flicker between readings.
Add a histeresis to prevent the flickering.
The current setting is:
setting ^
(dim) 2 | ------+---->---+
1 | +----<---+--->---+
(bright) 0 | +---<---+---------
+-------+--------+-------+--------> lux
20 40 60
BRANCH=smaug
BUG=chrome-os-partner:44400
TEST=check in a dark room (30~40 lux) there is no flickering.
Add unit test.
Change-Id: I4018e2c2ed764abf9c9ed28e2d50a3e94a7d5f75
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/308205
Add config option to use the old accelerometer reference frame,
which is used on samus and products using 3.14 or earlier kernel.
This fixes samus so that the lid angle calculation is correct
again.
This also moves the accel_orientation structure out of the board
directory and into common code, since it purely is a function of
the reference frame being used.
BUG=chrome-os-partner:43494
BRANCH=none
TEST=test on samus, verify lid angle calculation is correct once
again. also, enable the motion_lid test and verify that it passes.
Change-Id: I948a74a71964b54c68be66e828a030ddd0418947
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/300510
Tested-by: Aseda Aboagye <aaboagye@chromium.org>
Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
Instead of mocking i2c_read8/16/32, mock i2c_xfer.
We can now test code that call i2c_xfer directly and
test common/i2c.c
BRANCH=samus, ryu
BUG=chrome-os-partner:45223
TEST=Unit tests pass.
Change-Id: Iaa772515c40cf55d2050d0019e2062d63278adc0
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/299768
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Separate the bd99992gw ADC interface from the NCP15WB thermistor
adc-to-temp maths so that the thermistor can be used with various
other interfaces.
BUG=chrome-os-partner:44764
TEST=make buildall -j
Manual on Glados. Boot to S0, run "temps".
Verify that temperatures start around 28C and begin to increase after
system is powered-on for a long duration.
BRANCH=None
Change-Id: I3e72e9f390feebaac2440dbe722485f8d1cf8c56
Signed-off-by: Wonjoon Lee <woojoo.lee@samsung.com>
Reviewed-on: https://chromium-review.googlesource.com/296871
Reviewed-by: Shawn N <shawnn@chromium.org>
Add option to charge automatically from dual-role devices. This
also changes the charge override behavior such that any new
device attached will clear the override because any new source
is a potential device we might charge from.
BUG=chrome-os-partner:44958
BRANCH=smaug
TEST=tested charge_manager unittests with
CONFIG_CHARGE_MANAGER_DRP_CHARGING both defined and undefined
Change-Id: Iac77ff0c501826d5fb5a9d50f88399ebc3955b87
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/297789
Reviewed-by: Shawn N <shawnn@chromium.org>
Add support for ADC / thermistor reads on the BD99992GW PMIC.
BUG=chrome-os-partner:42156
TEST=Manual on Glados with subsequent commit. Boot to S0, run "temps".
Verify that temperatures start around 28C and begin to increase after
system is powered-on for a long duration.
BRANCH=None
Change-Id: Ic15f41046130317a0e0c3bce4a923ba624328c0d
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/289935
Reviewed-by: Alec Berg <alecaberg@chromium.org>
math library can be set independentely.
It is implied when motion sensor drivers are compiled in.
BRANCH=smaug
TEST=Build strago board specific tests, host test and ran
ryu image.
BUG=chromium:512329
Change-Id: I743ea7b44e4a3783602c11f3928cb3fa4b105ec4
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/287371
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Remove duplicate board_discharge_on_ac() functions and create
CONFIG_CHARGER_DISCHARGE_ON_AC_CUSTOM for boards that have a
unique implementation of board_discharge_on_ac().
BUG=chrome-os-partner:42294
BRANCH=none
TEST=make -j buildall.
load on samus and test 'ectool chargecontrol discharge' forces
discharging on AC, and 'ectool chargecontrol normal' resumes normal
charging.
Change-Id: I2b7c04b9278d07748d6d41798ceab1a7e90684e4
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/284911
Reviewed-by: Randall Spangler <rspangler@chromium.org>
This unifies all the EC header files to use __CROS_EC_FILENAME_H
as the include guard. Well, except for test/ util/ and extra/
which use __TEST_ __UTIL_ and __EXTRA_ prefixes respectively.
BUG=chromium:496895
BRANCH=none
TEST=make buildall -j
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Change-Id: Iea71b3a08bdec94a11239de810a2b2e152b15029
Reviewed-on: https://chromium-review.googlesource.com/278121
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Now that we've removed boards from ToT, also delete board-specific
code used only by the removed boards.
There are still more things to remove (unused charging chips, LED
drivers, COMx support). More CLs coming.
BUG=chromium:493866
BRANCH=none
TEST=make buildall -j
Change-Id: Ie6bdeaf96e61cadd77e3f6336c73b9b54ff4eabb
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/276524
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Move parts of usb_pd_config.h that are not part of the phy layer
out of usb_pd_config.h and into board.h. This cleans up the
division between the TCPC and TCPM as only the TCPC needs to
use usb_pd_config.h.
Also cleans up the use of the CC detection voltage thresholds
by creating standard macros to use based on Rp strength for the
board.
BUG=none
BRANCH=none
TEST=make -j buildall
Change-Id: I946cceb38bea8233095b8a4b287102bb8a3a296d
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/270337
Reviewed-by: Todd Broch <tbroch@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Add config options for various parts of USB PD stack:
CONFIG_USB_POWER_DELIVERY: The use of this option has changed
slightly. It now represents whether or not to include the USB
PD protocol and policy layers of the software stack.
CONFIG_USB_PD_TCPC: Compile in type-C port controller module
which performs the phy layer of the PD stack.
CONFIG_USB_PD_TCPM_STUB and CONFIG_USB_PD_TCPM_TCPCI: If
CONFIG_USB_POWER_DELIVERY is defined, then one TCPM needs to
be defined to declare which port management module to use
to drive the TCPC.
BUG=none
BRANCH=none
TEST=make -j buildall
Change-Id: I41aa65a478e36925745cd37a6707f242c0dfbf91
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/270171
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
