The keyscan task is short enough on stack space that turning on
keyboard debugging causes a stack overflow. This was previously not
the default, but https://chromium-review.googlesource.com/#/c/174373/
made it the default. Reverting that change just masks the problem;
enabling keyboard debugging on Spring would still cause a stack
overflow.
Rather than reverting that change, increase the stack size of the
keyscan task so that it doesn't overflow. There is sufficient space
to do this. Even after increasing the keyboard stack from 256 bytes to
320 bytes and doing a 'sysjump rw' to force jump tags to populate,
'shmem' reports 132 bytes free.
BUG=chrome-os-partner:23834
BRANCH=none
TEST=Boot Spring.
ksstate on
Bang on keyboard for a bit
taskinfo -> shows KEYSCAN task at 292/320 bytes free
sysjump rw
shmem -> shows 132 bytes free, 0 used
Change-Id: Idf9fdce5b9e6ca4d05d80a62ae9ea831ed508e3a
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/177355
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Update comments with more info, or remove if no longer applicable.
No code changes.
BUG=chrome-os-partner:18343
BRANCH=none
TEST=build all platforms; pass unit tests
Change-Id: I5b56eeb500bc0f00e84e91ef99684f4b1b310972
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/175418
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
No code changes, just comment fixes. Added config #ifdefs for the
debug commands as requested; they're enabled for Spring, so
functionality is unchanged.
BUG=chrome-os-partner:18343
BRANCH=none
TEST=build spring; see that ilim and batdebug commands still exist
Change-Id: I7c9f12281afa7ec68aa7e62dcfcd51682d88a16a
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/175216
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
To conform to our mutating naming conventions, let's rename the
chip-specific PWM header file to have the string "_chip" in it.
BUG=chrome-os-partner:18343
BRANCH=none
TEST=build all platforms; pass unit tests
Change-Id: I6584be8e54fd24c8638559817e150c707bc0edb5
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/174884
Reviewed-by: Randall Spangler <rspangler@chromium.org>
This is tidier than every board defining its own module_id enum, and
encourages standard naming of modules.
A subsequent CL will do more cleanup (standardizing on MODULE_LED
instead of MODULE_POWER_LED and MODULE_LED_KIRBY), but it's easier to
do that as a separate CL than part of this one.
BUG=chrome-os-partner:18343
BRANCH=none
TEST=build all platforms; pass unit tests
Change-Id: If0fcef284fb3aa2fa145bc9ff3d1f3f2d25a2e47
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/174382
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Originally, the ARM boards printed the keyboard scan matrix whenever
it changed. This generated a lot of output, so we filtered that at
the console channel level. When we refactored the keyboard scan
module, that changed so that the scan matrix was not printed by
default, and the 'ksstate' debug command was used to enable printing
it. But on ARM boards, 'ksstate on' wouldn't do anything without ALSO
using 'chan -1' to turn the keyboard console channel back on. And
without the scan matrix printing by default, there's no reason to keep
the keyboard channel off by default.
BUG=chrome-os-partner:18343
BRANCH=none
TEST=build all boards
bang on keyboard on pit and don't see much debug output
ksstate on
now bang on keyboard and see matrix changes
Change-Id: I554b42e7582d507530cdecad7b35df71ca0e634f
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/174373
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Previously, it was really confusing whether I2C_PORT_HOST meant the
port where the EC was the master, or the port used to talk to the AP.
No functional changes, just a global find/replace and some tidying of
unused comments.
BUG=chrome-os-partner:18343
BRANCH=none
TEST=build all platforms; pass unit tests
Change-Id: Ia591ba4577d3399729556e0234ba0db3a0e3c5ea
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/174546
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Device-specific headers belong in driver/ or chip/. The include/
directory should be for common interfaces.
Code should not normally need to include driver-specific headers. If
it does, it should use the full relative path from the EC project root
(for example, drivers/charger/bq24715.h).
Change-Id: Id23db37a431e2d802a74ec601db6f69b613352ba
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/173746
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Every chipset had its own header file just to declare a GPIO interrupt
handler. Since this seems to be a common feature of the power
interface, make a standard power_interrupt() API provided by
chipset.h. This lets us get rid of 4 include files, and makes it
easier to add more chipsets in the future.
BUG=chrome-os-partner:18343
BRANCH=none
TEST=build all boards; pass unit tests
Change-Id: I1fc5612d42625ea46e0a8e16a83085b66d476664
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/173745
If we do this:
enum foo_v {
FOO_A,
FOO_B,
FOO_COUNT
};
struct foo_t foo[] = {
{...},
{...},
};
BUILD_ASSERT(ARRAY_SIZE(foo) == FOO_COUNT);
Then we can be sure we're at least initialized all the elements of foo,
although there's no particular guarantee that the order is correct.
However, if we use this:
struct foo_t foo[] = {
[FOO_A] = {...},
[FOO_B] = {...},
};
and we accidentally get one wrong:
struct foo_t foo[] = {
[FOO_B] = {...},
[FOO_B] = {...},
};
Then the assertion still passes, but we've only initialized one element.
Don't do that.
BUG=chrome-os-partner:18343
BRANCH=none
TEST=manual
Refactoring only. Build everything. It should still work.
Change-Id: I58f659207990f18c6fb74b1cac2ec1163cdb07ea
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/172115
Reviewed-by: Randall Spangler <rspangler@chromium.org>
battery.h is the high-level interface. battery_smart.h is the
low-level interface. Most things don't need the low-level interface,
but were including smart_battery.h solely to get at battery.h. Fixed
this. Also merged battery_pack.h into battery.h, since it was odd to
split that data across multiple header files. Tidied the function
comments in battery.h as well.
No functional changes, just renaming files and adding comments.
BUG=chrome-os-partner:18343
BRANCH=none
TEST=build all boards; pass unit tests
Change-Id: I5ef372f0a5f8f5f36e09a3a1ce24008685c1fd0d
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/171967
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
The LED state machine ends up being very board-specific, as does the
specific configuration of LEDs and whether they're PWM'd or just
GPIOs. dparker has some clever ideas for how to move more of the
functionality to common/led_common.c (used at present only by peppy);
that will be done as a follow-on to this CL.
There's a unit test for the spring LED implementation. To keep that
compiling, just use a symlink to the spring-specific implementation.
No code changes; just moving around files.
BUG=chrome-os-partner:18343
BRANCH=none
TEST=build all boards; pass unit tests
Change-Id: I5973e701a29a72575db9a161dc146855ab21cca6
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/171771
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
We only used I2C_PORTS_USED to iterate through the list of hardware ports
actually in use, but we defined it in board.h at the same place where we
matched particular I2C devices to the (possibly shared) buses they're on.
This CL makes I2C_PORTS_USED into a global constant, so it can be set
automatically where we initialize the ports, and doesn't have to be
related to the list of attached devices.
BUG=chrome-os-partner:18343
BRANCH=none
TEST=manual
Build everything, run all tests, should still work.
Change-Id: I65f22f5cadfc4b3afe51af48faa5fb369bc3aa09
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/171884
The charger interrupt is active-low. Snow and Spring properly
triggered on falling (asserting) edge, but Pit (and Daisy/Puppy)
didn't. Fix those boards, and rename the signal to end in _L so we
don't make that mistake again.
BUG=chrome-os-partner:22827
BRANCH=pit
TEST=unplug/replug AC adapter on pit; see debug output as follows:
[batt] state charging -> idle0
Charger IRQ received.
[batt] state idle0 -> charging
Charger IRQ received.
Change-Id: I1f5c9370d1118461dc033955ba77aab2cebb7ece
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/170256
Reviewed-by: Jaehoon Kim <jh228.kim@samsung.com>
Tested-by: Jaehoon Kim <jh228.kim@samsung.com>
Reviewed-by: Doug Anderson <dianders@chromium.org>
The battery files contain board-specific constants and a few small
methods like battery-detect and battery-cut. Most of these aren't
reused across platforms. The battery files have also been cleaned up
so those board-specific constants basically all that's left in them.
Where a file is used by a single board only, move it to
board/(boardname)/battery.c. Batteries used by more than one board
(e.g. battery_link.c used by both link and bolt) are still in
common/battery_*.c, since that's cleaner than duplicating the file in
each board's directory.
No code changes, just moving files.
BUG=chrome-os-partner:18343
BRANCH=none
TEST=build all boards and pass unit tests
Change-Id: I946c8eb874672c77f9b77105e5b900f98fa48d0f
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/169893
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
The console task should be higher priority than the host command task,
since that allows debugging problems with host commands.
The keyboard scanning task should be higher priority than both of
them, since it's extremely latency-sensitive. As currently written,
long-running host commands such as I2C passthru can interfere with
keyboard scanning.
BUG=chrome-os-partner:22681
BRANCH=none (potentially affects pit, but apparently not noticeably)
TEST=type bursts of 6-8 characters quickly while doing a flash update
of the EC; should not drop characters.
Change-Id: I48db014053750a5f1fae5d06df34768975bb8297
Reviewed-on: https://chromium-review.googlesource.com/169334
Tested-by: Randall Spangler <rspangler@chromium.org>
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Commit-Queue: Randall Spangler <rspangler@chromium.org>
The ID detection and charging circuits on Spring are very different from
that on Kirby. PWM current limit is no longer used. The ID detection
sequence is also different. Also, there is no boost circuit on Kirby.
Given those hardware issues that we had to work around on Spring, it's
unlikely that we will have another board that shares the same/similar
ID detection design with Spring. Let's rename extpower_usb to
extpower_spring to better reflect this.
BUG=None
TEST=Build and boot Spring.
BRANCH=None
Change-Id: I7c212a121eed55665593cb7e1b2b672891819940
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/67031
This unifies the PWM module interface for LM4 and STM32. Now PWM
channels are defined in board.h/board.c. Instead of calling functions
named pwm_set_fan_duty(x), one can now use pwm_set_duty(PWM_CH_FAN, x),
which prevents additional functions added when we have a new PWM
channel.
BUG=chrome-os-partner:18343
TEST=Limit input current on Spring.
TEST=Check power LED in S0/S3/S5 on Snow.
TEST=Check keyboard backlight functionality on Link.
TEST=Check fan speed control/detecting on Link.
BRANCH=None
Change-Id: Ibac4d79f72e65c94776d503558a7592f7db859dc
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/64450
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Rather than have every board check for tasks before declaring their
config macros, have config.h know what configs are invalid without
their corresponding tasks.
BUG=chrome-os-partner:18343
BRANCH=none
TEST=build all platforms and pass unit tests
Change-Id: Iecf6eb44782e15565eaaf6d69c6288ee8d2e4c4c
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/65010
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
GPIO alternate functions used to be configured throughout the code,
which made it hard to tell which ones you needed to configure yourself
in board.c. It also sometimes (chip/lm4/i2c.c) led to GPIOs being
configured as alternate functions even if they weren't used on a given
board.
With this change, every board has a table in board.c which lists ALL
GPIOs which have alternate functions. This is now the only place
where alternate functions are configured. Each module then calls
gpio_init_module() to set up its GPIOs.
This also fixes a bug where gpio_set_flags() ignored most of the flags
passed to it (only direction and level were actually used).
On stm32f, gpio_set_alternate() does not exist, and pins are
configured via direct register writes from board.c. Rather than
attempt to change that in the same CL, I've stubbed out
gpio_set_alternate() for stm32f, and will fix the register writes in a
follow-up CL.
BUG=chrome-os-partner:21618
BRANCH=peppy (fixes I2C1 being initialized even though those pins are used
for other things)
TEST=boot link, falco, pit, spring
Change-Id: I40f47025d8f767e0723c6b40c80413af9ba8deba
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/64400
This reverts commit 154c73f32d.
The kernel driver to control TPS65090 FETs is now submitted in our tree,
and turning on the FET3 connected the 3G modem by default.
So let's remove the hardcoded to allow better power management policy on
the CPU side.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BRANCH=spring
BUG=chrome-os-partner:17790
TEST=on Spring, boot and dump the TPS65090 configuration from the EC
command line by using "pmu" command.
See 0x1f in the register 0x11 for FET3.
Change-Id: Ie699fef0348138a7483f0e8e7bcaebc37810eba8
Original-Change-Id: I9de0f92a561397ceb81a67b8291d1e8bf04ade38
Reviewed-on: https://gerrit.chromium.org/gerrit/57978
Reviewed-by: Vic Yang <victoryang@chromium.org>
Commit-Queue: Vincent Palatin <vpalatin@chromium.org>
Tested-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/64271
Tested-by: Vic Yang <victoryang@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Commit-Queue: Vic Yang <victoryang@chromium.org>
We've been declaring a bunch of statically-sized arrays:
extern struct foo_t foo[FOO_COUNT];
And then initializing them like so:
struct foo_t foo[FOO_COUNT] = {
/* blah */
};
That only catches cases where we initialize with too many entries. It
doesn't catch cases where we haven't initialized enough. This change tests
for both cases like so:
extern struct foo_t foo[];
struct foo_t foo[] = {
/* blah */
};
BUILD_ASSERT(ARRAY_SIZE(foo) == FOO_COUNT);
The affected arrays are:
adc_channels[ADC_CH_COUNT]
gpio_list[GPIO_COUNT]
temp_sensors[TEMP_SENSOR_COUNT]
x86_signal_list[X86_SIGNAL_COUNT]
i2c_ports[I2C_PORTS_USED]
BUG=chrome-os-partner:18343
BRANCH=falco,peppy
TEST=build all platforms
All platforms should still build, all tests should still pass.
Change-Id: Ibb16dc3201f32df7cdc875648e89ba4ffb09f733
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/63833
Reviewed-by: Randall Spangler <rspangler@chromium.org>
This change moves vendor specific temperature ranges to battery pack
files or board setup files. And added a host test case to verify that
does not change x86 smart battery charging state machine behavior.
BUG=chrome-os-partner:21181
BRANCH=None
TEST=manual
build test: util/ecmakeall.sh
hosttests: make hosttests && make runtests
Change-Id: I48e76826b5555f64b78e3c063ce5f02416c72aa2
Signed-off-by: Rong Chang <rongchang@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/62978
Reviewed-by: Vic Yang <victoryang@chromium.org>
No functional changes, just renaming config options.
Remove README, now that all options described in it have been moved to
config.h, and the remaining information is out of date. (Yes, we
should have a README which describes the organization of the EC
repository, but that's a matter for another CL; this one's about
cleaning up config options.)
BUG=chrome-os-partner:18343
BRANCH=none
TEST=build all platforms
Change-Id: Iafefbe94369f1217c698f11d358bc0ecac2bdfde
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/63145
Reviewed-by: Vic Yang <victoryang@chromium.org>
All of these were defined on all but a few platforms, and those
explicitly #undef them. So define them as enabled by default in
config.h so the board.h files are cleaner.
No functional changes; just rearranging/renaming config constants.
BUG=chrome-os-partner:18343
BRANCH=none
TEST=build all platforms; FEATURES=test emerge-falco chromeos-ec
Change-Id: I1201a1472ae29641e9e219c2a0347691ca64cd28
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/63102
Reviewed-by: Vic Yang <victoryang@chromium.org>
No functional changes, just documenting and renaming.
All boards which use the PMU must provide pmu_board_init(). This was
already true - except that Daisy's pmu_board_init() was implemented as
part of pmu_init() instead of its code living in board.c; I've moved
the code there now.
BUG=chrome-os-partner:18343
BRANCH=none
TEST=build all platforms
Change-Id: I85ad06dc3b6287ad917fe13acf83182f24a8f23d
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/62906
Reviewed-by: Vic Yang <victoryang@chromium.org>
No functional changes, just documenting and renaming.
BUG=chrome-os-partner:18343
BRANCH=none
TEST=build all platforms
Change-Id: I0b0d3cdce535d90ce437e82e96346fc3ca9be7b0
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/62673
This gets rid of mystery files like "ir357x" and "lp5562". All chip
names are now prefixed with their module type (e.g. "chipset_",
"led_driver_", etc.)
No functional changes; renaming files and CONFIG constants only.
BUG=chrome-os-partner:18343
BRANCH=none
TEST=build all platforms
Change-Id: I3227fb0f6b0243bb08a13577cdb0f6def0e15d54
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/60922
Previously, code which needed to work on all STM32F platforms needed
to specify them by name (CHIP_VARIANT_stm32f100 ||
CHIP_VARIANT_stm32f10x), and we needed extra symlinks in the
chip/stm32/ directory to allow the build system to find
family-specific files.
Add a CHIP_FAMILY level of abstraction, so that things which are
common across all STM32F platforms don't need to specify every STM32F
variant. Make the chip build look for family-specific filenames
instead of variant-specific filenames (except for config*.h, which is
actually variant specific).
In the few places where things actually are variant-specific, keep
using the existing CHIP_VARIANT defines.
Code refactoring only; no functional changes.
BUG=chrome-os-partner:20567
BRANCH=none
TEST=build all platforms
Change-Id: I1da831aadabf8b8dd9dfde423cac13c9f43eb953
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/60247
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-by: Vic Yang <victoryang@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Clean up timer initialization code to be more general, so that we can
use timer 9 for the LSB on STM32L. Then use timer 4 for the watchdog
helper.
BUG=chrome-os-partner:18781
BRANCH=none
TEST=From EC console:
timerinfo -> current time still counts up properly
waitms 2000 -> prints watchdog info before rebooting
Change-Id: Ib0ba496b0eadb93756dcd1841857546910baf2a9
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/59612
Reviewed-by: Simon Glass <sjg@chromium.org>
Starting DVT, Spring boards have updated hardware to prevent cap ringing
when a charger is plugged.
Adjust T01, T12, T23 and T34 current limit to 87.5% as expected by this
mechanism.
Push all termination voltages to 2.1v as the actual temperature range is
not related to the real charge temperature.
On pre-DVT boards, this will just reduce the max charging rate by 12.5%.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BRANCH=spring
BUG=chrome-os-partner:18987
TEST=on Spring EVT, use "pmu" command on the EC console and see
registers 0x5 to 0x9 contain : "3e 5e be fe ff"
Original-Change-Id: Ie078a38251cd2cb50ee605c34a6818bf994d148d
Reviewed-on: https://gerrit.chromium.org/gerrit/49484
Commit-Queue: Jon Salz <jsalz@chromium.org>
Reviewed-by: Jon Salz <jsalz@chromium.org>
Tested-by: Jon Salz <jsalz@chromium.org>
(cherry picked from commit 4122b222859db34cb6eee827cba4988df458d916)
Change-Id: I78355651f5f7abc0546fec0c4df8d38ea3549b2d
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/59197
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
GPIO_HI_Z was a bit misleading (it's high impedance by default, but it's
actually an output not an input), but when we added GPIO_HI_Z_OPEN to mean
"open-drain output, pulled low by default", it got too confusing.
This renames those macros to:
#define GPIO_ODR_HIGH (GPIO_OUTPUT | GPIO_OPEN_DRAIN | GPIO_HIGH)
#define GPIO_ODR_LOW (GPIO_OUTPUT | GPIO_OPEN_DRAIN | GPIO_LOW)
BUG=chrome-os-partner:18788
BRANCH=none
TEST=none
No functional change, just renaming some macros. If it compiles, it should
be unchanged in behavior.
Change-Id: Ic84d7be8531f2b240a8eca4f6cfe5291ebd2d5ef
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/58596
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Write protect signal naming is now consistent across boards.
New CONFIG_WP_ACTIVE_HIGH is present on systems where the write
protect signal is active-high (e.g. Link). This will be used in the
next CL, which moves flash_get_protect() to flash_common.c
BUG=chrome-os-partner:15613
BRANCH=none
TEST=flashinfo properly reports WP signal status
Change-Id: I502ab033c3eb36661cc3ee97320874b3fbf6fc0d
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/56087
Reviewed-by: Vic Yang <victoryang@chromium.org>
When system is locked, the console is disabled. However, we need console
for debugging and testing. This CL uses a bit from back-up register to
indicate if the console should always be enabled. (This bit is currently
used by fake WP, which is removed in this CL.) With this, we can set
this bit with console command 'forceen 1' to ensure console is never
disabled.
To prevent device shipped in this state, the chip name is postfixed with
'-unsafe' so that the device is not able to pass HWID check.
BUG=chrome-os-partner:19293
TEST=Manual
BRANCH=spring
Change-Id: I88556e973ca542c1bdc27ba64988718291e01a26
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/51086
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Also moves the handy i2cscan command to i2c_common. The
platform-dependent interface is now i2c_xfer().
Still more to do in follow-up CLs; for example, i2c_read_string() has
platform-dependent implementation, and the i2c/i2cread console
commands aren't common yet.
BUG=chrome-os-partner:18969
BRANCH=none
TEST=i2cscan on link, spring
Change-Id: Ia53d57beaa157bece293a4262257e20b4107589e
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/49492
Reviewed-by: Simon Glass <sjg@chromium.org>
Commit-Queue: Daniel Erat <derat@chromium.org>
Commit-Queue: Simon Glass <sjg@chromium.org>
I2C communication doesn't work on pit yet, so the charger task is
spewing errors to the console. This change allows the task to be
disabled cleanly on pit, and has no effect on other platforms.
BUG=chrome-os-partner:18657
BRANCH=none
TEST=build all platforms and see that charger task is still compiled
everywhere but pit
Change-Id: I788e817d5630fb1a28694819f4ef9948a503a744
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/49344
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
CONFIG_ macros should be set directly. Expanding the task names in the same
way made it difficult to tell what was a configuration choice and what was
due to changes in ec.tasklist
BUG=chrome-os-partner:18343
TEST=build all, run link
BRANCH=none
Change-Id: Ib82e34f974238ee2dd216f33b701b6f4c6a4f1f1
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/49098
Reviewed-by: Randall Spangler <rspangler@chromium.org>
STM32-based platforms now use the same lid debouncing code as
LM4-based platforms, generate lid-open / lid-closed events, and
trigger lid-change hooks.
This is needed for disabling keyboard scanning when the lid is closed,
as well as future changes to mask off wake events when the lid is
closed.
BUG=chrome-os-partner:18896
BRANCH=spring
TEST=build all platforms; check that spring boots when lid is opened
Change-Id: I09a6e91119c3739297fe49b7eacac6efda988284
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/48924
Reviewed-by: Vic Yang <victoryang@chromium.org>
This is left over from when we had a pair of macros for each GPIO
register, one which concatenated its base address name and one which
took a base address. Only the latter has survived, but its naming is
longer than it needs to be and isn't consistent with other register
banks (USART, TIM, etc.).
No code changes, just renaming macros.
BUG=chrome-os-partner:18343
BRANCH=none
TEST=build all platforms
Change-Id: I15a282fd01db2a25219970e28ce551d8dc80193f
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/48226
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
gpio_set_level() now allows setting the pin level if GPIO_LOW or
GPIO_HIGH is specified. Previously, stm32 platforms did this even
though the definition of gpio_set_level() said it wouldn't work.
Fixed gpio_set_level() not setting level after warm reboot on stm32
because it was checking the GPIO_DEFAULT flag in the wrong place.
Fixed LM4 still mucking with alternate function settings and levels
even if GPIO_DEFAULT was specified.
And checked gpio_list[] and all of the calls to gpio_set_flags() to
make sure everything still behaves the same way it did before (or
better, in the case of actual bugs).
BUG=chrome-os-partner:18718
BRANCH=none
TEST=build all platforms; boot spring and link
Change-Id: I4b84815f76060252df235ff9a37da52c54a8eac5
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/48058
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
For most tests, we don't need to power the AP. Let's exclude chipset
task to save memory space.
BUG=chrome-os-partner:18598
TEST=Run pingpong test on Spring
BRANCH=none
Change-Id: I545c5b3e1c27b0067d4ffe09a7971d32b75d6039
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/47833
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Make internal APIs static, and remove board_ prefix for clarity.
Move TSU6721 calls from charger task to extpower_usb functions for
better encapsulation.
No functional changes, just moving code. Yes, this will make
cherry-picking back from spring to TOT less convenient, but now the
code is more readable and it will make maintaining the PMU code easier
as we add boards.
BUG=chrome-os-partner:18343
BRANCH=none
TEST=build spring
Change-Id: I52b37e57fc8519859996a110b0503277c6f0bbc8
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/47657
This changes current TASK() syntax to TASK_BASE() and TASK_NORMAL(),
where TASK_BASE is necessary for the EC to boot on a board and
TASK_NORMAL represents the task that can be removed in a test binary.
Tasks introduced by a test should be listed as TASK_TEST().
Note that this CL breaks current tests (many of them are broken anyway),
which will be fixed in up coming CLs.
BUG=chrome-os-partner:18598
TEST=Build link/bds/spring/snow/daisy/mccroskey. (mccroskey failed for
unrelated issue)
BRANCH=none
Change-Id: Ic645cdae0906ed21dc473553f1f43c2537ec4bb9
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/47531
This more clearly indicates what it does - it manages external power
supplied by USB. This code will be common to multiple boards which
take power via USB, so it might as well move now.
No code changes, just moving the file.
BUG=chrome-os-partner:18343
BRANCH=none
TEST=build spring
Change-Id: Iae74122db38666bc346104a5096fa82df8cb0c19
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/47656
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Board configuration interfaces are now defined in board_config.h, not
in every board.h file.
Tidied /alphabetized CONFIG defines.
No functional changes, just rearranging code.
BUG=chrome-os-partner:18343
BRANCH=none
TEST=build all targets
Change-Id: I6196591784f8fa9ce6dfccd31891b679fb200063
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/47419
Hard reset is done by shorting 3.3V to ground. This is only really
necessary to work around the PMU's I2C engine getting into a weird /
uncommunicative state.
This should not make any functional changes; the code is behaving the
same way it did before.
BUG=chrome-os-partner:18343
BRANCH=none
TEST=build daisy, snow, spring
Change-Id: I0edbdfc11bd5f6643075ffc83f4df3e11fc14675
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/47199
