This adds a new host commmand for sending RW updates to PD devices.
The host command has a variety of sub-commands for performing the
update, including: erase RW, reboot, write new hash, write flash.
To program zinger RW, you should send host commands in this order:
write new hash to all 0's
reboot (zinger boots into RO since RW hash doesn't match)
erase RW
write flash
write new hash to match contents of RW
reboot
This also adds an ectool command to write a new RW. Just pass it
the RW .flat or .bin file.
BUG=chrome-os-partner:31361
BRANCH=none
TEST=ectool --dev=1 --interface=lpc flashpd 0 0 zinger.RW.flat
Change-Id: Ia81615001b83ad7ee69b1af2bf1d7059177cde04
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/213239
Reviewed-by: Randall Spangler <rspangler@chromium.org>
The original version of the script worked but as the USB PD protocol
SM has been enhanced to handle more complicated scenarios the
occurrence of collisions on the baseband comm has grown and script
needs to account for that.
Script now checks status of ACK from zinger 'DONE 0' and retries two
additional times for commands that failed. If those three attempts
are unsuccessful script raises exception and quits.
Also added some more logging around retries and progress of chunk
writes.
BRANCH=none
BUG=chrome-os-partner:30135
TEST=manual, util/flash_pd.py build/zinger/ec.RW.flat succeeds in
programming zinger even in light of some retries.
Change-Id: Iaa8a22c2510ea5f4ebd92e1715be5fe062e13c61
Signed-off-by: Todd Broch <tbroch@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/213131
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Passing the "--usb" argument will now utilized case-closed
debugging for flashing the EC. Currently this is only supported
for the samus LM4-based board.
BRANCH=none
BUG=none
TEST=verify that when the case-closed debugging flag is set, the
alternate openocd config file is used for samus, and an error is
thrown for all other boards
Change-Id: I0642bc2e9c2657cd8dbd83ee6e282365275d665a
Signed-off-by: Dominic Chen <ddchen@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/211744
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Change the VDM implementation in the PD task to allow for VDMs
at any time when connected without disrupting any regular PD
communications.
BUG=none
BRANCH=none
TEST=load on a samus and on a zinger and test sending VDMs:
pd 0 flash version
pd 0 flash reboot
Also, test using the flash_pd.py script to write zinger RW using
VDMs.
Change-Id: I48352978d8c45f78e8a5a7735d65b013a853f3e2
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/210746
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
This fixes the bug that SRC_ROOT is not set. This should be the last fix
for flash_ec. DEFAULT_BOARD is intentionally left as is. For developers
who don't want to use --board option every time, they need to set
DEFAULT_BOARD in their environment variables.
BUG=chromium:397202
TEST=util/flash_ec --board=link
BRANCH=None
Change-Id: If23f73adbd37f2a79cb5176e3665562e278f46db
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/210523
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
Add console commands to send the Vendor-Defined Messages used to flash a
USB-PD target.
Also add a simple test script to flash Zinger through its CC line. To
run the script, the board must have CONFIG_USB_PD_CUSTOM_VDM defined.
By default fruitpie has this config option enabled.
BRANCH=none
BUG=chrome-os-partner:28330
TEST=With a fruitpie connected to a zinger run
./util/flash_pd.py ./build/zinger/ec.RW.flat
and see Zinger booting on RW.
Change-Id: I06f8f545e28b93b2e646e668d81b594eb7976a2d
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/203375
Reviewed-by: Todd Broch <tbroch@chromium.org>
If chromeos-ec package hasn't been built, flash_ec tries to find
stm32mon in local build/ directory. However, this is broken in the last
CL when we move away from crosutils. Let's fix it.
BUG=chromium:397202
TEST=Flash samus_pd
BRANCH=None
Change-Id: I05395a727fa965032a24f51c07deaebf2d7c7e51
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/210419
Reviewed-by: Randall Spangler <rspangler@chromium.org>
The script currently depends on common.sh from crosutils, which is not
installed on beaglebone and also pulls in dependency on other
repositories. Let's switch to shared shflags library and include output
formatting functions in flash_ec script. This way we are independent
from crosutils.
BUG=chromium:397202
TEST=Run the script to flash EC
BRANCH=None
Change-Id: Ib18987410eb32d773d55fb4e53133adf230167b9
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/209827
Reviewed-by: Dan Shi <dshi@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Board support for Planton, the Raiden testing board for type-C
functional testing.
BUG=none
BRANCH=none
TEST=make BOARD=plankton, load onto a plankton, and verify
buttons are read correctly, and connect raiden to samus and
verify that PD communication is successful
Change-Id: I40922d5627d62f7f3540ac6a307596428d40baf5
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/207724
servo is already aware of the sensor hub.
Using samus_pd as an example, set the proper argument to flash
an image to the sensor hub.
BUG=chrome-os-partner:30801
BRANCH=None
TEST=None
Change-Id: I0c8465d1e34d515224675957c3e8482392585a56
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/209232
Reviewed-by: Randall Spangler <rspangler@chromium.org>
This patch is base on new hardware board, veyron has not some stuff,
such as power led, charge en
BUG=None
TEST=Read log with servo board, it has reponse when type some commends
BRANCH=None
Change-Id: I45502fd1278f69db5e46fc9ab1deaee02fc8708f
Signed-off-by: zyw <zyw@rock-chips.com>
Reviewed-on: https://chromium-review.googlesource.com/209231
Reviewed-by: Alexandru Stan <amstan@google.com>
Commit-Queue: Alexandru Stan <amstan@google.com>
Tested-by: Alexandru Stan <amstan@google.com>
This allows sending host commands to the PD chip through the EC.
The --interface option allows forcing a particular host interface.
This is necessary at present because the crosec device driver doesn't
support host protocol v3 so only has 8-bit command numbers.
BUG=chrome-os-partner:30079
BRANCH=none
TEST=from EC console,
ectool version -> prints EC version
ectool --interface=lpc --dev=0 version -> prints EC version
ectool --interface=lpc --dev=1 version -> prints PD version
ectool --interface=lpc --dev=2 version -> prints error
ectool --interface=i2c version -> can't find EC
ectool --interface=dev version -> prints EC version
Change-Id: I9dd10578dac77e3e104d19e2f37759814eec6ca2
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/207948
This is needed for supporting device passthru. Right now, the --dev
option simply prints an error.
BUG=chrome-os-partner:30079
BRANCH=none
TEST=manual
ectool -> prints an error
ectool help -> prints list of commands
ectool version -> prints EC version
ectool --dev=0 version -> prints EC version
ectool --dev=1 version -> prints error about bad device 1
ectool --dev=0 -> prints an error (because there's no command)
ectool --dev=0 foo -> prints 'unknown command foo'
Change-Id: I0f431a4789428cd6cc8ef48b396b38237935282a
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/207904
The 2 boards are similar enough to test stuff on big for now, at least
until the new hardware comes.
Also added veyron to flash_ec.
Also cleaned up the style: pre-upload.py was giving errors on files
that were unmodified from big(spaces instead of tabs).
I had to ignore this though:
> ERROR: Macros with complex values should be enclosed in parenthesis
> #471: FILE: board/veyron/board.h:35:
> +#define KB_OUT_PORT_LIST GPIO_A, GPIO_B, GPIO_C
BRANCH=none
BUG=chrome-os-partner:30167
TEST=~/trunk/src/platform/ec $ make BOARD=veyron clean &&
make -j BOARD=veyron && util/flash_ec --board=veyron --ro
verify ec is alive and version is reported as veyron
Change-Id: I1f4bd562c0ab55360a2160a753ad8ad9b58f8c47
Signed-off-by: Alexandru Stan <amstan@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/207270
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Reviewed-by: Doug Anderson <dianders@chromium.org>
ectool must support all prior versions of commands that shipped
EC binaries use.
BUG=chrome-os-partner:29830
BRANCH=None
TEST=Manual
With an EC that only supports version 0:
- Run 'ectool batterycutoff' -> success
- Run 'ectool batterycutoff at-shutdown' -> error with explicit
message about at-shutdown not being supported
- Run 'ectool batterycutoff foo' -> error, bad parameter
With an EC that support version 0 or 1:
- Run 'ectool batterycutoff' -> success
- Run 'ectool batterycutoff at-shutdown' -> success
- Run 'ectool batterycutoff foo' -> error, bad parameter
Change-Id: Ia88cfc5fa7c5125828ec0595f0b6a505916c97ea
Signed-off-by: Dave Parker <dparker@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/205155
Reviewed-by: Vic Yang <victoryang@chromium.org>
Twinkie only has test points for uart connection so nominally it will
need to be programmed via DFU mode over USB micro-B connection.
This CL changes from programming via flash_stm32 function and instead
adds dfu support.
BUG=chrome-os-partner:28337
TEST=util/flash_ec --board=twinkie successfully programs twinkie f/w
Change-Id: Ia5433b569579bb879bd405e98921450764510a73
Reviewed-on: https://chromium-review.googlesource.com/204749
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Commit-Queue: Todd Broch <tbroch@chromium.org>
Tested-by: Todd Broch <tbroch@chromium.org>
If at-shutdown is specified, the battery is cut off
1 seconds after the host has shutdown.
BUG=chrome-os-partner:29292,chrome-os-partner:28887
BRANCH=tot,nyan
TEST=Run batterycutoff ectool command and cutoff console
command with and without 'at-shutdown' option. Verify
the battery is cut off immediately without the option
specified and 1 seconds after shutdown with. View the
console log to see the deferred cutoff occur.
The following tests are verified on big.
console:
cutoff, AC on: system is off after removing AC.
cutoff, AC off: system is off immediately.
at-shutdown, AC on: system is off after "power off" and removing AC.
at-shutdown, AC off: system is off after "power off".
ectool:
batterycutoff, AC on: system is off after removing AC.
batterycutoff, AC off: system is off immediately.
at-shutdown, AC on: battery is cut off after 1s of shutdown.
system is off right after removing AC power.
at-shutdown, AC off: system is off after 1s of shutdown.
[84.058416 power state 3 = S0, in 0x0000]
[84.058803 power lost input; wanted 0x0001, got 0x0000]
[84.059120 power off 3]
[84.072148 Cutting off battery in 1 second(s)]
[84.123896 power shutdown complete]
[84.128790 power state 7 = S0->S3, in 0x0002]
[84.139694 power state 2 = S3, in 0x0002]
[84.150857 power state 8 = S3->S5, in 0x0002]
[84.166975 power state 1 = S5, in 0x0002]
[84.177972 power state 1 = S5, in 0x0002]
[85.080012 Battery cut off succeeded.]
Change-Id: Id4bacf79ad3add885260655f80cb8127bafe1ad6
Signed-off-by: Dave Parker <dparker@google.com>
Signed-off-by: Louis Yung-Chieh Lo <yjlou@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/203694
Reviewed-by: Vic Yang <victoryang@chromium.org>
This adds a new lightbar sequence (TAP), which temporarily displays the
battery level. It pulses if the system is charging.
BUG=chrome-os-partner:29041
BRANCH=ToT
TEST=manual
From the EC console, run
lightbar seq tap
The lightbar should change temporarily.
Then run
lightbar demo on
and press the Up, Down, Left, and Right keys to fake the battery charge
level (up & down) and the AC present state (left & right). Run the
lightbar seq tap
command periodically to watch it change.
Change-Id: I84ff928d93060f7ef7d46d608732d37cf5185aff
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/202964
Reviewed-by: Randall Spangler <rspangler@chromium.org>
CL manages various dut-control dependencies for readying the STM32
part for programming.
Additionally deprecated the short-lived --uart_prefix argument as
user's defining this could be problematic without knowledge of
necessary modifications to h/w & s/w.
Signed-off-by: Todd Broch <tbroch@chromium.org>
CQ-DEPEND=CL:200146
BRANCH=none
BUG=chrome-os-partner:28826
TEST=manual,
util/flash_ec --board=samus_pd succeeds.
util/flash_ec --board=spring succeeds.
Change-Id: I7627c77293da187700aeddf7382dbb12e163a2ef
Reviewed-on: https://chromium-review.googlesource.com/200148
Tested-by: Todd Broch <tbroch@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Commit-Queue: Todd Broch <tbroch@chromium.org>
There are CrOS devices that have multiple embedded controllers and
therefore multiple uarts that can be used for programming.
This CL allows user to set the uart_prefix to access the alternate
uarts via the --uart_prefix argument. Default is still 'ec'.
Signed-off-by: Todd Broch <tbroch@chromium.org>
BRANCH=none
BUG=chrome-os-partner:28826
TEST=util/flash_ec --board=samus_pd --uart_prefix=usbpd
Change-Id: I9fbe8d13067b7f514447645b2587dda706445661
Reviewed-on: https://chromium-review.googlesource.com/199900
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Tested-by: Todd Broch <tbroch@chromium.org>
Commit-Queue: Todd Broch <tbroch@chromium.org>
This adds three new lightbar subcommands to the EC_CMD_LIGHTBAR_CMD host
command, allowing the AP to read the current brightness level, the
current lightbar LED values, and the state of demo mode.
Because this is new, also update LIGHTBAR_IMPLEMENTATION_VERSION. All the
previous commands are unchanged, though.
BUG=chrome-os-partner:28596
BRANCH=ToT
TEST=manual
From the AP, run these commands to see the changes:
ectool version
ectool lightbar brightness
ectool lightbar 0
ectool lightbar 1
ectool lightbar 2
ectool lightbar 3
ectool lightbar demo
The version output is different, the other commands used to just emit
errors.
Change-Id: If32a5d2388217edc3ae7b9b091d66e9d2cf753be
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/199881
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Previously I neglected to increment the buffer pointer which would
allow double writing of same data and exclude tail if write didn't
complete in one call.
Also fixing bug with EAGAIN/EWOULDBLOCK to retry in those cases.
Previously we'd just have just failed for those errno values.
Signed-off-by: Todd Broch <tbroch@chromium.org>
BRANCH=none
BUG=chromium:371147
TEST=still compiles
Change-Id: I30dbe56b2a4c735c487464349786a9db430130a8
Reviewed-on: https://chromium-review.googlesource.com/199052
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Commit-Queue: Todd Broch <tbroch@chromium.org>
Tested-by: Todd Broch <tbroch@chromium.org>
While debugging reboot issue, it was difficult to get POST code from failing
boards. Currently POST code is only accessible from EC console. Not all boards
are fitted with servo board.
This patch adds Port 80 history access from ectool. Reuse command code 0x48,
EC_CMD_PORT80_LAST_BOOT with version 1.
Signed-off-by: Wenkai Du <wenkai.du@intel.com>
BUG=chrome-os-partner:28514
BRANCH=rambi
TEST=manually test on rambi to confirm port 80 history match EC console
Change-Id: If204d8fb457d8d8d18055f8282a406a35c03305e
Reviewed-on: https://chromium-review.googlesource.com/198012
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Reviewed-by: Wenkai Du <wenkai.du@intel.com>
Commit-Queue: Wenkai Du <wenkai.du@intel.com>
Tested-by: Wenkai Du <wenkai.du@intel.com>
Since we already created the firmware-nyan-5771.B branch, we can
remove this from ToT now. But for sure we are still able to
cherry-pick changes back to ToT or from ToT.
BUG=none
BRANCH=tot
TEST=make buildall
Change-Id: I637d27b9f8672c5d17b60e210a5211ab8e19b54a
Signed-off-by: Louis Yung-Chieh Lo <yjlou@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/197165
ectool gpioget - returns all GPIOs (with flag info)
ectool gpioget <GPIO_NAME> - get value of <GPIO_NAME>
ectool gpioget count - returns number of GPIOs
ectool gpioget all - returns all GPIOs (with flag info)
BUG=chromium:344969
TEST="ectool gpioget [<subcmd> <GPIO_NAME>]" returns correct information
on squawks
BRANCH=none
Change-Id: Ib6f0d8135a76501f08b084bfd7eb1f2689d5d6e0
Signed-off-by: Mohammed Habibulla <moch@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/196680
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Also adds 'battparam' console command.
BUG=chrome-os-partner:25145
BRANCH=ToT
TEST=Run 'ectool batteryparam set 0 0x1234'
'ectool batteryparam get 0'
and on the console:
'battparam 0'
'battparam 0 0x1234'
on a board that implements parameter 0.
Change-Id: I9cc54d001631f53dd39ae64cfdeececaa1747181
Original-Change-Id: Ib2812f57f2484309d613b23dab12ad43e0417bd2
Signed-off-by: Dave Parker <dparker@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/195824
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/197162
When using a "non-servo" debug dongle or integrated FTDI chip to flash a STM32
microcontroller, add the option to toggle the reset of the
microcontroller if the control exists.
This was not done for the original Toad version because it cannot
control the reset line, but now Firefly, Zinger, Fruitpie debug
interfaces can do it.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BRANCH=none
BUG=none
TEST=./util/flash_ec --board=zinger
Change-Id: Ia21e3b3403e56b4c0797582659d9a3a0c26bb8bb
Reviewed-on: https://chromium-review.googlesource.com/197050
Tested-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Todd Broch <tbroch@chromium.org>
Commit-Queue: Vincent Palatin <vpalatin@chromium.org>
When we use 'kill -9' to kill other users of the serial port then we
end up with stale lockfile warnings. Try to use a normal kill first
to be a little nicer.
BRANCH=ToT
BUG=None
TEST=flash_ec and no longer get stale lockfile messages from cu.
Change-Id: Idb39ca803a9c54b6fe972f6854515ea5a8bdab03
Signed-off-by: Doug Anderson <dianders@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/194190
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Added a sub-command to the motionsense host command (0x2b) for getting/setting
the lid angle at which the keyboard is disabled as a wake source in S3. The
value can be anywhere from 0 to 360 degrees, default set to 180. Note, this
only takes affect for boards that have CONFIG_LID_ANGLE_KEY_SCAN defined.
Modified ectool motionsense command to use new host sub-command.
Also modified the lid angle measurement in the EC to be in the range [0, 360],
instead of [-180, 180], and changed casting of lid angle as an int to round
to nearest.
BUG=none
BRANCH=rambi
TEST=Tested on a glimmer:
Using default keyboard disable lid angle of 180, made sure that when lid
angle is past 180, key presses do not wake system, and when lid angle is
less than 180, key presses do wake up system.
Used ectool motionsense kb_wake to set the keyboard disable lid angle to 0.
Made sure that keyboard never wakes up the system. Set keyboard disable lid
angle to 360 and made sure that the keyboard always wakes up the system.
Change-Id: I437164c6e38c29169ef6e20e86c9cf2a1c78f86e
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/193663
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/194172
Added enum for motion sensor ID's into ec_commands.h so that the host
can easily send host commands targeting the desired accelerometer.
Changed sensor present flag to just senosr flags, currently with only a
single mask defined for sensor present. This allows for easier future
expansion of various flags.
Also, added a motion sense module flags to the dump sub-command for flags
that represent all sensors, such as is the motion sense task active.
BUG=chrome-os-partner:27321
BRANCH=rambi
TEST=Manual test on a glimmer by testing ectool motionsense command
Change-Id: Iac052269a60db9ff4506f0490c3a0c6daad5b626
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/193122
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/193309
Created a host command to set/get various motion sensor parameters and
added an ectool command to use that host command.
The host command is created such that the first argument is a
sub-command. Sub-commands created include:
dump: dumps all current motion sensor data
info: returns general information about each motion sensor
ec_rate: set/get the EC sampling rate of sensors
sensor_range: set/get the sensor range (ie +/- 2G,4G,8G)
sensor_odr: set/get the sensor output data rate (ie 50Hz, 100Hz, ...)
For sensor_range and sensor_odr parameters, since the host doesn't know
what are valid values for the parameter, the host can specify to round
up or down to the nearest valid value. For example, the host can specify
to set the output data rate to at least 100Hz, and the EC will return
the closest valid output data rate that is at least 100Hz.
BUG=chrome-os-partner:27321
BRANCH=rambi
TEST=Test on a glimmer using ectool from vt-2 prompt:
> ectool motionsense help
Usage:
motionsense - dump all motion data
motionsense info NUM - print sensor info
motionsense ec_rate [RATE_MS] - set/get sample rate
motionsense odr NUM [ODR [ROUNDUP]] - set/get sensor ODR
motionsense range NUM [RANGE [ROUNDUP]]- set/get sensor range
>
> ectool motionsense
Sensor 0: 0, 0, 1024
Sensor 1: 1024, 0, 0
Sensor 2: None
> ectool motionsense info 0
Type: accel
Location: base
Chip: kxcj9
> ectool motionsense ec_rate
10
> ectool motionsense ec_rate 1000
1000
> ectool motionsense odr 0
100000
> ectool motionsense odr 0 40000 1
50000
> ectool motionsense range 0 8
8
After running this I verified on the EC console that all the parameters
were set appropriately. I tested the EC sampling rate was 1000ms by
running lidangle on and making sure samples were displayed roughly every
second. I verified the sensor odr and range by defining
CONFIG_CMD_ACCELS and typing:
> accelrange 0
8
> accelrate 0
50000
Change-Id: I444e2f0eafabd607f1c7aa78b5c4e91f6cb06387
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/192064
Reviewed-on: https://chromium-review.googlesource.com/193307
Reviewed-by: Randall Spangler <rspangler@chromium.org>
This replaces the obsolete and temporary (ha!) EC_CMD_CHARGE_DUMP host
command with EC_CMD_CHARGE_STATE. This is used to monitor and adjust the new
charge state implementation, including any board-specific customizations.
This command is a single catch-all command with multiple subcommands
(similar to EC_CMD_LIGHTBAR_CMD) so that we don't have to keep adding new
top-level host commands just to support incremental changes.
BUG=chrome-os-partner:23776
BRANCH=ToT
TEST=manual
From the AP, try these commands:
ectool chargestate show
ectool chargestate param
ectool chargestate param <NUM>
ectool chargestate param <NUM> <VALUE>
Watch the EC console and use its "chg" command to verify the effects of
setting various params.
Note: the Samus-specific fast-charging profile override is param 0x10000.
You can check it with the EC console "fastcharge" command.
Change-Id: Iad2f773a085bc25c05073b3eed9866f122ae9d78
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/193305
Reviewed-by: Randall Spangler <rspangler@chromium.org>
On some boards, the temperature sensor doesn't route to EC.
Thus the 'ectool temps all' would get "200" for every temp sensor.
This is misleading information.
So, check the EC_MEMMAP_THERMAL_VERSION before we dump. If it is 0,
then the temp data is not filled (and properly will not be filled).
BUG=chrome-os-partner:27460
BRANCH=all
TEST=Tested on big, which doesn't have sensor routed to EC.
Change-Id: I03e9736054ed602b7cc126e9fd958e0cecea79b4
Signed-off-by: Louis Yung-Chieh Lo <yjlou@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/192149
Reviewed-by: Mao Huang <littlecvr@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
once firmware branch exists, this commit need go into it and
doesn't need to be carried in master forever
BRANCH=blaze
BUG=chrome-os-partner:27120
TEST=USE="nyan_blaze" emerge-nyan_blaze chromeos-ec;flash nyan
board, verify ec is alive and version is reported as blaze
Change-Id: I115890a7122440a25c3d1f5e4b94248099a1de99
Signed-off-by: Neil Chen <neilc@nvidia.com>
Reviewed-on: https://chromium-review.googlesource.com/190610
Reviewed-by: Katie Roberts-Hoffman <katierh@chromium.org>
