1. In combinational mode and clock source is 8MHz,
if timer 3 counter register always equals to 7, then timer 4 will be a
32-bit MHz free-running counter.
2. Fix TIMER_32P768K_CNT_TO_US(), each count should be 30.5175 us,
not 32.768us.
3. Fix TIMER_CNT_8M_32P768K().
4. Make sure LPC wake up interrupt is enabled before entering doze /
deep doze mode.
Signed-off-by: Dino Li <dino.li@ite.com.tw>
BRANCH=none
BUG=none
TEST=1. Console commands: 'gettime', 'timerinfo', 'waitms', and 'forcetime'.
2. Enabled Hook debug, no warning message received (48hrs).
3. Tested ectool command 'version' x 2000.
Change-Id: I796d985361d3c18bc5813c58705b41923e28c5b1
Reviewed-on: https://chromium-review.googlesource.com/310039
Commit-Ready: Dino Li <dino.li@ite.com.tw>
Tested-by: Dino Li <dino.li@ite.com.tw>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
1. To enable INT_PRI (hardware interrupt priority level 0~3)
register, bit0@INT_CTRL = 0.
2. GIE need to be enabled before UART is initialized.
[symptom]
To define CONFIG_RWSIG / CONFIG_RSA / CONFIG_SHA256, then power on:
after RW image is verified, firmware stuck in uart_flush_output().
Signed-off-by: Dino Li <dino.li@ite.com.tw>
BRANCH=none
BUG=none
TEST=1. bit0@INT_CTRL = 0.
2. The RW image is verified and jump to image RW.
Change-Id: I393a3d5f87ea257885b872c91bfce43aecbaea8b
Reviewed-on: https://chromium-review.googlesource.com/309400
Commit-Ready: Dino Li <dino.li@ite.com.tw>
Tested-by: Dino Li <dino.li@ite.com.tw>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
1. Implement deep doze mode for CONFIG_LOW_POWER_IDLE.
Signed-off-by: Dino Li <dino.li@ite.com.tw>
BRANCH=none
BUG=none
TEST=test the following items in deep doze mode.
1. WUI interrupts wake-up OK. (For example, power button, lid,
uart rx, keyboard ksi, and so on)
2. LPC access interrupt wake-up OK.
3. Enabled Hook debug, no warning message received (48hrs).
Change-Id: I8702a112632cb6c1c0fa75d682badf272130a7d4
Reviewed-on: https://chromium-review.googlesource.com/307060
Commit-Ready: Dino Li <dino.li@ite.com.tw>
Tested-by: Dino Li <dino.li@ite.com.tw>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
[chip config]
1. No hardware specific udelay().
2. Enable watchdog.
[watchdog]
3. Watchdog period is "CONFIG_WATCHDOG_PERIOD_MS" of config.h.
4. Watchdog auxiliary timer period is "CONFIG_AUX_TIMER_PERIOD_MS".
[task and irq]
5. Write 1 to clear interrupt pending status, no |.
6. A global variable for store interrupt number of software interrupt.
[uart]
7. Always reset UART module before config it.
[hwtimer]
8. Use more external timers for HW timer module.
[task]
9. Fix task profiling.
Signed-off-by: Dino Li <dino.li@ite.com.tw>
BRANCH=none
BUG=none
TEST=[watchdog]
1. console "waitms 1100", only pre-watchdog warning message.
2. console "waitms 1600", warning message and watchdog reset.
[hwtimer]
3. console commands "gettime", "timerinfo", and "forcetime".
4. enable hook debug and there is no delayed by more than 10%
warning message over 48 hours.
5. There is no watchdog reset too.
[task]
6. console 'taskinfo'
Task Ready Name Events Time (s) StkUsed
0 R << idle >> 00000000 32.927724 308/512
1 HOOKS 00000000 0.034267 372/768
2 R CONSOLE 00000000 0.116763 468/768
3 HOSTCMD 00000000 0.000641 372/512
4 KEYPROTO 00000000 0.000042 212/512
5 KEYSCAN 00000000 0.000908 356/512
IRQ counts by type:
38 2932
155 1
158 261
160 67
Service calls: 87
Total exceptions: 3348
Task switches: 167
Task switching started: 0.001999 s
Time in tasks: 33.282819 s
Time in exceptions: 0.164717 s
Change-Id: I234085cec231cd855d2a5e639ea1b0966c61d796
Reviewed-on: https://chromium-review.googlesource.com/296939
Commit-Ready: Dino Li <dino.li@ite.com.tw>
Tested-by: Dino Li <dino.li@ite.com.tw>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Returns the most significant bit set.
Replace 31 - __builtin_clz(x), so x must be different from 0.
Use get_next_bit when not on the performance path,
on performance path set the bit field just after reading it.
BRANCH=smaug
BUG=none
TEST=compile, check Ryu still works.
Change-Id: Ie1a4cda4188f45b4bf92d0549d5c8fb401a30e5d
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/301300
When there is an interrupt event, N8 CPU will save PSW register to IPSW
register and clear GIE then jump to interrupt service routine. N8 will
restore PSW from IPSW after "iret" instruction (the above are purely
hardware mechanism).
Nested interrupt will occur if we set GIE again in interrupt context.
symptom:
power button pressed while LID open -> exception or unknown reset.
Signed-off-by: Dino Li <dino.li@ite.com.tw>
BRANCH=none
BUG=none
TEST=1. Manually pressed power button x200.
2. Console "eflash" erase and write eflash OK.
Change-Id: Ic04a23d473ebc6417dffea814a27583cb8d63a1f
Reviewed-on: https://chromium-review.googlesource.com/289437
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Commit-Queue: Dino Li <dino.li@ite.com.tw>
Tested-by: Dino Li <dino.li@ite.com.tw>
symptom:
Enable debugging and profiling statistics for hook functions
(#define CONFIG_HOOK_DEBUG), and __muldi3 function is missing
while link.
Signed-off-by: Dino Li <dino.li@ite.com.tw>
BRANCH=none
BUG=none
TEST=1. compile successful and hook_notify starting to print message.
2. console "hookstats"
Change-Id: Ia2815bcefd0f9ac06dab9c75ea6ee06312878ca2
Reviewed-on: https://chromium-review.googlesource.com/293432
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Commit-Queue: Dino Li <dino.li@ite.com.tw>
Tested-by: Dino Li <dino.li@ite.com.tw>
The atomic_* functions are often used in contexts where the data they
will operate on are volatile (due to being shared between tasks or a
task and an interrupt handler). Adding volatile here makes using the
atomic_* functions a little easier in those cases and removes a cast
from the call sites (which could be obscuring a bug, if for instance
the variable was modified to be a uint16_t).
Signed-off-by: Anton Staaf <robotboy@chromium.org>
BRANCH=None
BUG=None
TEST=make buildall -j
Change-Id: I71356eb3cf2c0506df38532eee767c7d78f9240e
Reviewed-on: https://chromium-review.googlesource.com/287516
Trybot-Ready: Anton Staaf <robotboy@chromium.org>
Tested-by: Anton Staaf <robotboy@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Commit-Queue: Anton Staaf <robotboy@chromium.org>
This commit changes the way in which tasks are started. Instead of
having all tasks marked as ready to run upon initialization, only the
hooks task is marked as ready to run. HOOK_INITs are now run at the
beginning of the hooks task. After the HOOK_INITs, the hooks task calls
back to enable the rest of the tasks, reschedules, and proceeds as
usual. This also allows the removal of checks for task_start_called().
BUG=chrome-os-partner:27226
BRANCH=None
TEST=Built and flash EC image for samus and verified that EC boot was
successful as well as AP boot. Additionally, verified that charging,
keyboard, tap-for-battery were all still functional.
TEST=make -j buildall tests
Change-Id: Iea53670222c803c2985e9c86c96974386888a4fe
Signed-off-by: Aseda Aboagye <aaboagye@google.com>
Reviewed-on: https://chromium-review.googlesource.com/283657
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Commit-Queue: Aseda Aboagye <aaboagye@chromium.org>
Tested-by: Aseda Aboagye <aaboagye@chromium.org>
1. Add flash control module for emulation board.
2. Fix system jump for Andes core.
3. Change the physical size of the flash on the chip to 256KB.
note:
1. Only IT839x series supports flash write protect by registers.
2. Static DMA method of flash code only for IT839x series and IT838x Dx.
Signed-off-by: Dino Li <dino.li@ite.com.tw>
BRANCH=none
BUG=none
TEST=1. console command flashwp and flashinfo
1-a. flashwp enable
1-b. WP asserted and reboot
1-c. flashinfo RO protected now
1-d. WP deasserted and reboot
1-e. No protected
1-f. flashwp disable
1-g. WP asserted and reboot
1-h. No protected
2. console sysjump and sysinfo
2-a. sysjump rw
2-b. jumping to image RW
2-c. sysinfo, Copy : RW, Jumped : yes
2-d. sysjump ro
2-e. jumping to image RO
2-f. sysinfo, Copy : RO, Jumped : yes
3. RO/RW firmware image test
3-a. sysjump rw
3-b. use console command "eflash" to erase RO region,
erase OK and system still work.
3-c. reflash firmware
3-d. sysjump rw, sysjump ro
3-e. use console command "eflash" to erase RW region,
erase OK and system still work.
Change-Id: I7666a095e73026a02fb812e5143bc5172ab713e8
Reviewed-on: https://chromium-review.googlesource.com/271390
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Commit-Queue: Dino Li <dino.li@ite.com.tw>
Tested-by: Dino Li <dino.li@ite.com.tw>
"RO" is a workaround for GP base instructions.
And now we have added "-mno-gp-direct" option in the NDS32 toolchain.
So the compiler would not generate GP base instructions directly,
and we can remove this "RO".
Signed-off-by: Dino Li <dino.li@ite.com.tw>
BRANCH=none
BUG=chrome-os-partner:24378
TEST=console "version" and "gpioget"
Change-Id: I23cb6374fb8eb57081d713bf5c70b80a87dd2fb5
Signed-off-by: Dino Li <dino.li@ite.com.tw>
Reviewed-on: https://chromium-review.googlesource.com/281862
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Alec Berg <alecaberg@chromium.org>
This unifies all the EC header files to use __CROS_EC_FILENAME_H
as the include guard. Well, except for test/ util/ and extra/
which use __TEST_ __UTIL_ and __EXTRA_ prefixes respectively.
BUG=chromium:496895
BRANCH=none
TEST=make buildall -j
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Change-Id: Iea71b3a08bdec94a11239de810a2b2e152b15029
Reviewed-on: https://chromium-review.googlesource.com/278121
Reviewed-by: Randall Spangler <rspangler@chromium.org>
If task_get_current() is called early during initialization when we have
not yet done a context switch, our current_task pointer is invalid. Add
an assert to detect this case and put it behind CONFIG_DEBUG_BRINGUP, a
new config that's intended to enable possibly-costly pre-production
debugging.
BUG=chrome-os-partner:40677
TEST=Manual on glados. Define CONFIG_DEBUG_BRINGUP, then call i2c_write from
board_init and verify the new assert fails. Remove the i2c_write and verify
the new assert passes.
BRANCH=None
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Change-Id: I6014ccf739dcc4c8f4f960be2b89f01e423b65b5
Reviewed-on: https://chromium-review.googlesource.com/273541
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Add hook for battery state of charge change. Hook will be used
to cleanup the samus charging workarounds to follow.
BUG=none
BRANCH=samus
TEST=make -j buildall
Change-Id: I99cbb8264783802139cac689804b056623063695
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/245252
Reviewed-by: Shawn N <shawnn@chromium.org>
When another task is holding the lock, mutex_lock() should call
task_wait_event_mask() to wait only for TASK_EVENT_MUTEX events.
If it calls task_wait_event(), any pending events are silently
discarded while its waiting for the the lock.
BUG=chromium:435611
BRANCH=ToT,samus
TEST=make buildall -j, and:
Before this change, I watched the EC console while shutting down
and rebooting Samus. I saw the request event arrive:
[37.576295 LB lightbar_resume() requests 5 S3S0]
[46.055725 LB_version]
But the lightbar task never saw it. Adding a bunch of debug
messages showed that it was being lost in mutex_lock().
After this change, the event is delivered:
[30.167670 LB lightbar_resume() requests 5 S3S0]
[30.171009 LB cur_seq 2 S3 returned pending msg 5 S3S0]
[30.173816 LB running cur_seq 5 S3S0. prev_seq 2 S3]
[32.410073 LB cur_seq 5 S3S0 returned value 0]
[32.410865 LB running cur_seq 3 S0. prev_seq 2 S3]
[39.938388 LB_version]
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Change-Id: I011838538960cc57171f0a3c4cdee113d156e9ff
Reviewed-on: https://chromium-review.googlesource.com/231370
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Our code base contains a lot of debug messages in this pattern:
CPRINTF("[%T xxx]\n") or ccprintf("[%T xxx]\n")
The strings are taking up spaces in the EC binaries, so let's refactor
this by adding cprints() and ccprints().
cprints() is just like cprintf(), except that it adds the brackets
and the timestamp. ccprints() is equivalent to cprints(CC_CONSOLE, ...)
This saves us hundreds of bytes in EC binaries.
BUG=chromium:374575
TEST=Build and check flash size
BRANCH=None
Change-Id: Ifafe8dc1b80e698b28ed42b70518c7917b49ee51
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/200490
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Some section(entry point, interrupt vector, e-flash signature
and so on) of linker script file are not linked.
The start address of e-flash signature should always at 00000080h.
Default firmware treats VCC logic high to prevent pin 11 logic low
but use following functions.
(EC2I, KBC, SWUC, PMC, CIR, SSPI, UART, BRAM, and PECI)
Signed-off-by: Dino Li <dino.li@ite.com.tw>
BRANCH=none
BUG=none
TEST=Firmware can startup on IT8380 emulation board.
Change-Id: I9860ac5b99dcc6e9e00dbc9d1e79a141237b7789
Reviewed-on: https://chromium-review.googlesource.com/190008
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Tested-by: Dino Li <dino.li@ite.com.tw>
Commit-Queue: Dino Li <dino.li@ite.com.tw>
Put each functions in a separate section by using -ffunction-sections,
then discard the non-referenced ones in the linker with -gc-sections.
Force keeping a few special symbols by using the KEEP() linker
directive.
This modification is not saving a lot of spaces per se, but will enable
larger code pruning with future optional features.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BRANCH=none
BUG=none
TEST=make buildall, manually check discarded symbols in the .map file
and run on Spring and Link.
The size delta is the following:
Link: total 85.7k -> 84.9k (.text 60.3k -> 59.5k)
Spring: total 59.2k -> 57.2k (.text 44.4k -> 42.5k)
Change-Id: Ib6eb0d3f2cc4fc172c9fc26acac2e486921690a3
Reviewed-on: https://chromium-review.googlesource.com/189224
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Commit-Queue: Vincent Palatin <vpalatin@chromium.org>
Tested-by: Vincent Palatin <vpalatin@chromium.org>
When we are calling the re-scheduling routine at the end of an irq
handling routine, we need to ensure that the high registers are not
currently saved on the system stack.
On Cortex-M3/M4, the compiler is normally doing tail-call optimization
there and behaving properly, but this fixes the fact that insanely large
interrupt handling routines where sometimes not compile and not running
properly (aka issue 24515).
This also prepares for one more core-specific DECLARE_IRQ routine on
Cortex-M0.
Note: now on, the IRQ handling routines should no longer be "static".
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BRANCH=none
BUG=chrome-os-partner:24515
TEST=make -j buildall
revert the workaround for 24515, see the issue happening only without
this CL.
Change-Id: Ic419369231925568df05815fd079ed191a5446db
Reviewed-on: https://chromium-review.googlesource.com/189153
Reviewed-by: Vic Yang <victoryang@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Commit-Queue: Vincent Palatin <vpalatin@chromium.org>
Tested-by: Vincent Palatin <vpalatin@chromium.org>
Move the CLZ instruction emulation C code to the common directory, so it
can be reused for all CPU cores missing a CLZ instruction (e.g. CortexM0).
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BRANCH=none
BUG=none
TEST=run EC console on STM32F072B Discovery board with Cortex-M0 core,
and pass all available unit-tests on target.
Change-Id: Ief56cac7430fcb0fbced8a8925250c89cbd0bcfc
Reviewed-on: https://chromium-review.googlesource.com/188981
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Commit-Queue: Vincent Palatin <vpalatin@chromium.org>
Tested-by: Vincent Palatin <vpalatin@chromium.org>
Sometimes the toolchain tries to put a relocation which is not suitable
to access variables in a read-only section.
The nds32 gcc uses GP-relative signed 17-bit relocation to access
variables stored in .rodata (eg lwi.gp $r0, [ +gp ])
That's wrong since $gp is pointing in the middle of .data and .bss in
the SRAM, while .rodata is sitting in flash.
Since on IT8380, the flash is at 0x00000 and the SRAM is at 0x80000
(512kB further), the linker will fail trying to create the signed 17-bit
relocation (it detect that it needs to truncate it)
Force the compiler to put another relocation as a workaround for now.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BRANCH=none
BUG=chrome-os-partner:24378
TEST=./util/make_all.sh ; make BOARD=it8380dev
check "version" and "gpioget" on spring, link and it8380dev.
Change-Id: Ife50adf3a26be28f113292f73a1a70e8d74b5d8c
Reviewed-on: https://chromium-review.googlesource.com/176913
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Commit-Queue: Vincent Palatin <vpalatin@chromium.org>
Tested-by: Vincent Palatin <vpalatin@chromium.org>
