We actually need to care about x, the PRI register is actually a list of
registers (and we have code that uses some of the later ones).
BUG=None, discovered while chrome-os-partner:33451
TEST=Change priorities of irqs(like UART over GPIO(spi_event)), note how they
actually work and override each other as told
BRANCH=None
Change-Id: I9f5bf7ba9d4211f782ff260fbce17deb7c53a31f
Signed-off-by: Alexandru M Stan <amstan@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/236087
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Cortex-m0 we supports 2 bit priorities for the NVIC, yet we clear with 0x7 (3
bits). Change so we now clear with 0x3
Also limited priority to the max available (so we don't set extra bits we don't
want or modulus the priority, otherwise setting priority 8 will actual give you
priority 0) in both cortex-m and cortex-m0.
BUG=None, discovered while looking at the code
TEST=Should be no functional change, NVIC priorities should still work the same.
BRANCH=None
Change-Id: I31ba041449cae96983753b297e2631c310a406c4
Signed-off-by: Alexandru M Stan <amstan@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/236086
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
When another task is holding the lock, mutex_lock() should call
task_wait_event_mask() to wait only for TASK_EVENT_MUTEX events.
If it calls task_wait_event(), any pending events are silently
discarded while its waiting for the the lock.
BUG=chromium:435611
BRANCH=ToT,samus
TEST=make buildall -j, and:
Before this change, I watched the EC console while shutting down
and rebooting Samus. I saw the request event arrive:
[37.576295 LB lightbar_resume() requests 5 S3S0]
[46.055725 LB_version]
But the lightbar task never saw it. Adding a bunch of debug
messages showed that it was being lost in mutex_lock().
After this change, the event is delivered:
[30.167670 LB lightbar_resume() requests 5 S3S0]
[30.171009 LB cur_seq 2 S3 returned pending msg 5 S3S0]
[30.173816 LB running cur_seq 5 S3S0. prev_seq 2 S3]
[32.410073 LB cur_seq 5 S3S0 returned value 0]
[32.410865 LB running cur_seq 3 S0. prev_seq 2 S3]
[39.938388 LB_version]
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Change-Id: I011838538960cc57171f0a3c4cdee113d156e9ff
Reviewed-on: https://chromium-review.googlesource.com/231370
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Allow to use larger RSA keys by setting CONFIG_RSA_KEY_SIZE to 4096 or
8192 rather than using the default 2048-bit size.
It's mainly for benchmarking purpose right now as we don't have the RAM
to store the 3x key size buffer and the flash space for the public key
structure.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BRANCH=samus
BUG=none
TEST=build Zinger with CONFIG_RSA_KEY_SIZE equals to 4096 and run it.
Change-Id: I9839121bf158d0a30dde1e48d875f345191bfec2
Reviewed-on: https://chromium-review.googlesource.com/228925
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Commit-Queue: Vincent Palatin <vpalatin@chromium.org>
Tested-by: Vincent Palatin <vpalatin@chromium.org>
Previously the USB RAM size was off by a factor of two
for chips that required 32-bit alignment of accesses,
even though the underlying memory was 16-bits in size.
This change adds an additional configuration for the
access size (it still assumes that the underlying memory
is 16-bits in size) and uses that to adjust the USB_RAM
memory section in the linker scripts.
This change also removes the default values for the USB
RAM from stm32/config_chip.h because they mask issues
when new chips are added. It is better for a new chip
to fail to compile until these values are provided.
Finally, this change introduces a common USB API header
so that common code doesn't need to include the STM32
specific header.
Signed-off-by: Anton Staaf <robotboy@chromium.org>
BRANCH=None
BUG=None
TEST=make buildall -j
Enable console on ryu_p2 and discovery-stm32f072 board
Verify that it works on both
Change-Id: Id118627f53e9e8ff1bd09fb51f1f9634ff495d19
Reviewed-on: https://chromium-review.googlesource.com/228833
Tested-by: Anton Staaf <robotboy@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Commit-Queue: Anton Staaf <robotboy@chromium.org>
This implements a new API for EC modules to define MKBP event sources
and send MKBP event to the AP. Also, a new host command
EC_CMD_GET_NEXT_EVENT is added for the AP to query the pending MKBP
events. Each event type may have custom event data sent along with the
event.
BRANCH=None
BUG=chrome-os-partner:33194
TEST=Enable MKBP event on Ryu. Set a host event from EC console, run
'ectool nextevent', and see MKBP event 0x01 (HOST_EVENT) and the set
host event.
Signed-off-by: Vic Yang <victoryang@chromium.org>
Change-Id: I28a1b7e826bcc102bbe39016c9bb3e37d125664c
Reviewed-on: https://chromium-review.googlesource.com/224905
Reviewed-by: Randall Spangler <rspangler@chromium.org>
We already have interrupt handlers for channel 4 to 7. We need channel 3
for the new Ryu boards. Add the handlers for channel 1 to 3. Also,
instead of copy-pasting interrupt handlers, define a macro and declare
interrupt handlers with it.
BRANCH=None
BUG=chrome-os-partner:32660
TEST=make buildall
TEST=Check PD communication on the new Ryu board (with other CLs to
enable the new boards.)
Change-Id: I51d6bd16739f31a7efbeb4ec19bb91a1546fe21d
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/224175
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Do not allow rescheduling tasks if task_start() has not been called.
This fixes a bug in which if console input occurs between uart_init()
and task_start(), the MCU crashes because uart_init() enables uart
interrupts which attempts to wake up the console task when RX data
is received, which then tries to task switch before we initialized
task scheduling.
BUG=chrome-os-partner:32561
BRANCH=samus
TEST=add while(1) loop to adc_init() to simulate stalled ADC
initialization. When stalled, send console character and observe
that without this CL MCU crashes, and with this CL the MCU does
not crash.
Change-Id: I34418e88ebe0063acf1cc55ab5a57b5fddcd9d23
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/221599
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
The Zinger RW is now signed with 2048-bit RSA key (using SHA-256 as
digest).
This CL implements the verification mechanism.
note: the RSA key used for signing must be provided as a .pem file.
The path to .pem file must be provided in the PEM environment variable.
By default, it's using the dev key stored in zinger_dev_key.pem.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BRANCH=samus
BUG=chrome-os-partner:28336
TEST=on Zinger, run with properly signed RW firmware and corrupted
firmware and check the serial traces.
Change-Id: Ia58482458904a3ed72d6b0e95996cae86a0ead83
Reviewed-on: https://chromium-review.googlesource.com/220178
Commit-Queue: Vincent Palatin <vpalatin@chromium.org>
Tested-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Alec Berg <alecaberg@chromium.org>
'powerindebug' is only used when there is a problem with power
sequencing. 'taskready' is rarely used and the same info can be
retrieved by 'taskinfo'.
Put both behind config flags and disable 'taskready' by default. Also
disable 'powerindebug' for Ryu.
BUG=chrome-os-partner:32203
TEST=Build Ryu and check flash space used.
BRANCH=None
Change-Id: I753a1f5411d6e840a80aba03afc94f9640d381a8
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/219490
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Currently, on stm32f cortex-m0 systems, interrupts are always being
directed to the RO vector table. This can cause strange problems when
running RW software because it is still calling IRQ handlers in the RO
code.
Unfortunately, on cortex-m0 the ability to specify the vector table
location in flash (VTOR register) is optional, and stm32f0 parts do not
have it. Instead, in order to run RW IRQ handlers, at init time, this
CL copies the vector table from flash to the base address of SRAM
(0x20000000), and then selects SRAM to be mapped to 0x00000000 where
the core looks to find the vector table.
BUG=none
BRANCH=none
TEST=Tested on zinger.
- Verified that vector table is copied to SRAM by printing out 48 words
from SRAM base address 0x20000000 in main() and verifying that it matches
the vector table in flash in the disassembly.
- Verified the vector table at SRAM 0x20000000 points to the RW handlers
when in RW and the RO handlers when in RO.
- Also printed out PC in one IRQ handler and verified it was in the
appropriate section of code.
Also, ran on samus_pd and did a sysjump RW to make sure at least one other
system works.
Change-Id: I22aff1b5e0de9b23fd3324f0cbe4f6c45a81967e
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/210063
Reviewed-by: Vic Yang <victoryang@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Import code to do 64-bit multiplication on Cortex-M0 core without SMULL
instruction.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BRANCH=none
BUG=none
TEST=make buildall
add a 64-bit multiplication and see it compiled properly.
verify in .map files that the code is discarded for cortex-M0 based
platforms not using the 64-bit multiplication.
Change-Id: I0a91b3502f4bee4bb79b193fe0854e56a7d498f7
Reviewed-on: https://chromium-review.googlesource.com/207132
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Tested-by: Vincent Palatin <vpalatin@chromium.org>
Commit-Queue: Vincent Palatin <vpalatin@chromium.org>
On panic, reboot properly the CPU rather than just jumping to the reset
vector as that might lead to some incorrect initializations.
Properly plug the div by 0 to the panic handling.
Add a small trace if the debug output is activated.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BRANCH=none
BUG=chrome-os-partner:29840
TEST=add adhoc code triggering a data abort and see the firmware
printing a trace, then rebooting immediatly in a working state.
Change-Id: I1d5a98d9113c8ae08e05588a40f941d1ed22cebe
Reviewed-on: https://chromium-review.googlesource.com/206268
Reviewed-by: Vic Yang <victoryang@chromium.org>
Tested-by: Vincent Palatin <vpalatin@chromium.org>
Commit-Queue: Vincent Palatin <vpalatin@chromium.org>
Enough USB support to be able to enumerate the device and use bulk or
interrupt endpoints.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BRANCH=none
BUG=chrome-os-partner:28295
TEST=with the following USB console CL, connect a Fruitpie through USB
and use its console over USB.
Change-Id: I37b7f3b6a754cb82ab5f940ea20122d2e16b3b5b
Reviewed-on: https://chromium-review.googlesource.com/193983
Tested-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Todd Broch <tbroch@chromium.org>
Commit-Queue: Vincent Palatin <vpalatin@chromium.org>
Our code base contains a lot of debug messages in this pattern:
CPRINTF("[%T xxx]\n") or ccprintf("[%T xxx]\n")
The strings are taking up spaces in the EC binaries, so let's refactor
this by adding cprints() and ccprints().
cprints() is just like cprintf(), except that it adds the brackets
and the timestamp. ccprints() is equivalent to cprints(CC_CONSOLE, ...)
This saves us hundreds of bytes in EC binaries.
BUG=chromium:374575
TEST=Build and check flash size
BRANCH=None
Change-Id: Ifafe8dc1b80e698b28ed42b70518c7917b49ee51
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/200490
Reviewed-by: Randall Spangler <rspangler@chromium.org>
This is another patch to fix the bug which causes a HardFault exception
at the "svc" instruction in __wait_evt().
The HardFault is due to a priority escalation problem in which "svc"
is called when the PRIMASK is high, meaning interrupts are disabled.
The issue was that an interrupt can occur just before the "svc"
instruction, and when an interrupt fires that performs a context switch,
the IRQ handler disables interrupts setting the PRIMASK reg high.
The arm v6 reference manual specifies that "PRIMASK unchanged on
exception exit". So, therefore, we must clear PRIMASK by running "cpsie"
before exiting IRQ handler.
BRANCH=none
BUG=chrome-os-partner:28296
TEST=
Reproduce the problem on a fruitpie by inserting dummy for loop in
__wait_evt() before "svc" call:
asm volatile("isb");
for (i = 0; i < 250; i++) ;
__schedule(1, resched);
Then, when running pd dev, the system gets the HardFault exception
within a few minutes because there is more time for an interrupt
to occur and disable interrupts right before call to "svc".
After applying this patch, the code has run for > 3 hours without
a HardFault.
Change-Id: Ic50252b09c40c7d76975ff7f16d799c9eae2bde6
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/197839
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
From time to time (usually under heavy interrupt load), the runtime on
Cortex-M0 was panic'ing at the "svc" instruction with a HardFault
exception (inside the wait_event() function).
The issue was probably the following :
the wait_event() code is doing an atomic_read_clear() whose critical
section disables interrupts and re-enables them using "cpsie i",
then do __schedule() call which is essentially a "svc" instruction.
According to ARMv6-m reference manual :
"If execution of a CPS instruction:
increases the execution priority, the CPS execution serializes that
change to the instruction stream.
decreases the execution priority, the architecture guarantees only that
the new priority is visible to instructions executed after either executing
an ISB instruction, or performing an exception entry or exception
return."
So, when we are executing the "svc", PRIMASK.PM can still be seen as 1
(while it was set to 0 by "cpsie i") and in that case the software
interrupt is replaced by a HardFault.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BRANCH=none
BUG=chrome-os-partner:28296
TEST=run Firefly board under load for extended periods of time.
Change-Id: Ie355c36f06e6fe2fee5cca8998a469fa096badad
Reviewed-on: https://chromium-review.googlesource.com/196659
Commit-Queue: Vincent Palatin <vpalatin@chromium.org>
Tested-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Alec Berg <alecaberg@chromium.org>
In order to achieve really tiny firmwares, make our runtime (tasks,
hooks, muxed timers, GPIO abstraction ...) optional.
Add 2 new build options for it : CONFIG_COMMON_RUNTIME and
CONFIG_COMMON_GPIO which are enabled by default, and ensure all the
source files are built according to the right configuration variable.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BRANCH=none
BUG=none
TEST=make buildall
build a minimal board with no runtime.
Change-Id: Icb621cbe0a75b3a320cb53c3267d6e578cd3c32f
Reviewed-on: https://chromium-review.googlesource.com/189403
Reviewed-by: Vic Yang <victoryang@chromium.org>
Commit-Queue: Vincent Palatin <vpalatin@chromium.org>
Tested-by: Vincent Palatin <vpalatin@chromium.org>
Put each functions in a separate section by using -ffunction-sections,
then discard the non-referenced ones in the linker with -gc-sections.
Force keeping a few special symbols by using the KEEP() linker
directive.
This modification is not saving a lot of spaces per se, but will enable
larger code pruning with future optional features.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BRANCH=none
BUG=none
TEST=make buildall, manually check discarded symbols in the .map file
and run on Spring and Link.
The size delta is the following:
Link: total 85.7k -> 84.9k (.text 60.3k -> 59.5k)
Spring: total 59.2k -> 57.2k (.text 44.4k -> 42.5k)
Change-Id: Ib6eb0d3f2cc4fc172c9fc26acac2e486921690a3
Reviewed-on: https://chromium-review.googlesource.com/189224
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Commit-Queue: Vincent Palatin <vpalatin@chromium.org>
Tested-by: Vincent Palatin <vpalatin@chromium.org>
