To reset the TPM task, we send it an event so that it will reset
only when it's not busy doing actual TPM stuff that might fiddle
with the stack or shared memory. But that means that we can't
always know when the task finally gets around to resetting
itself.
This CL adds a tpm_reset() function that blocks until the reset
actually occurs. Obviously it can't do that if it's being called
in interrupt context or from the TPM task itself, but otherwise
it does.
BUG=chrome-os-partner:52366
BRANCH=none
CQ-DEPEND=CL:361680
TEST=make buildall, test on Gru, manual tests
In addition to the normal rebooting, logging in/out, and so
forth. I added a temporary console command to call tpm_reset()
and scattered a bunch of ccprintfs around it. When called due to
SYS_RST_L, it didn't block. When invoked with the console
command, it did.
Change-Id: I51e8b1299dbdcd1a12273cf48a890e93ed32a8c8
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/388125
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Rather than doing a full cr50 reset when the system reset SYS_RST_L is
asserted, just reset the state of the TPM task and library. Re-clear
.bss for those modules, then re-initialize.
BRANCH=none
BUG=chrome-os-partner:52366
CQ-DEPEND=CL:366792
TEST=make buildall; test on Gru
Trigger a SYS_RST_L by using the AP's reboot command, power
off/on, log in/out/in.
See that the Cr50 does not reboot and the firmware and userspace
are still happy about the TPM.
Change-Id: I32cd2bb72316f68c74db77a20a8d09112b402d4b
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/361680
We found the api utility in ROM doesn't enable burst mode of GDMA. It
influences the performance of FW download a lot. The CL modified GDMA
for moving the code of the other region from flash to ram. And move a
function that kicks off GMDA transactions to suspend ram in case this
utility is erased by itself. This issue will be fixed in our next
generation.
Modified sources:
1. system.c: Implement GDMA bypass.
2. system_chip.h: Import flash addresses for GDMA bypass code.
3. registers.h: Add GDMA register definitions.
4. cortex-m/ec.lds.S: Add lowpower_ram2 section in linker script.
BRANCH=none
BUG=chrome-os-partner:56794
TEST=make BOARD=npcx_evb; test sysjump and measure download time
Change-Id: I8490f8f2e5a8cdcb6fd10511878c4a4af8073bbf
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
Reviewed-on: https://chromium-review.googlesource.com/381779
Commit-Ready: Shawn N <shawnn@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Add a hook to act when the a device is going in tablet mode and back.
BUG=chromium:606718
BRANCH=kevin
TEST=Test with evtest that an event is sent to the AP.
Change-Id: Ic9c3b158f1178504af41abff18b28de8e07fc7a7
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/380412
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
Even when CONFIG_RESTRICTED_CONSOLE_COMMANDS is enabled, there
are many commands that can't do anything dangerous. This marks
some of those commands as safe to use, even when restrictions are
enforced.
I'm only marking commands that are used by the Cr50, since that's
the only board that has restrictions.
BUG=chrome-os-partner:55322
BRANCH=none
TEST=make buildall, test on Cr50 hardware
Change-Id: I6289d332830175b6adcb6b20cb4c21d01d27a25e
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/376188
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Since pretty much always, we've declared console commands to take
a "longhelp" argument with detailed explanations of what the
command does. But since almost as long, we've never actually used
that argument for anything - we just silently throw it away in
the macro. There's only one command (usbchargemode) that even
thinks it defines that argument.
We're never going to use this, let's just get rid of it.
BUG=none
BRANCH=none
CQ-DEPEND=CL:*279060
CQ-DEPEND=CL:*279158
CQ-DEPEND=CL:*279037
TEST=make buildall; tested on Cr50 hardware
Everything builds. Since we never used this arg anyway, there had
better not be any difference in the result.
Change-Id: Id3f71a53d02e3dc625cfcc12aa71ecb50e35eb9f
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/374163
Reviewed-by: Myles Watson <mylesgw@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Add __keep attribute to irqprio entries to ensure they are not dropped
when CONFIG_LTO is enabled.
BUG=chrome-os-partner:55920
BRANCH=None
TEST=Manual on kevin. Check build/RO/ec.RO.map, verify that
.rodata.irqprio section is not empty.
Change-Id: I51ae23556d6f46b2cd7ba098f0e7a785292b2853
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/366571
Commit-Ready: Shawn N <shawnn@chromium.org>
Tested-by: Shawn N <shawnn@chromium.org>
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
cts.tasklist contains tasks run only for CTS. These tasks are added to the
tasks registered in ec.tasklist with higher priority. This design allows
board directories to be free from CTS stuff.
cts.tasklist can be placed in each suite directory (cts/suite/cts.tasklist).
If a suite does not define its own cts.tasklist, the common list is used
(i.e. cts/cts.tasklist).
BUG=chromium:624520
BRANCH=none
TEST=Ran the followings:
make buildall
make CTS_MODULE=gpio BOARD=nucleo-f072rb
make CTS_MODULE=gpio BOARD=stm32l476g-eval
Change-Id: Ibb242297ee10a397a8fcb6ff73d8cbc560daa885
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/359445
Reviewed-by: Chris Chen <twothreecc@google.com>
Previously the maximum number of deferred routines was specified by the
the default maximum number of deferred routines you had to override
this, and if you wanted fewer, you still payed the price of having the
defer_until array statically allocated to be the maximum size.
This change removes that define and instead creates the RAM state of
the deferred routine (the time to wait until to call the deferred) when
the deferred is declared.
Signed-off-by: Anton Staaf <robotboy@chromium.org>
BRANCH=None
BUG=None
TEST=make buildall -j
manually test on discovery-stm32f072
Change-Id: Id3db84ee1795226b7818c57f68c1f637567831dc
Reviewed-on: https://chromium-review.googlesource.com/335597
Commit-Ready: Anton Staaf <robotboy@chromium.org>
Tested-by: Anton Staaf <robotboy@chromium.org>
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
If OUTDIR brings in a "@", the build breaks because that delimits the
path, leading to invalid file names.
This can happen (and happened) when building on a Jenkins CI instance
which uses jobname@number as path for parallel checkouts on a
single build node.
BRANCH=none
BUG=none
TEST=build with make out=foo@bar ... failed and works now.
Change-Id: Id0594f0d7312419110091443755ec11b5f8ee2d8
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://chromium-review.googlesource.com/327110
Commit-Ready: Patrick Georgi <pgeorgi@chromium.org>
Tested-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-by: Martin Roth <martinroth@chromium.org>
To get better power consumption in S0, we add FW support for
CONFIG_LOW_POWER_S0.
Before entering deep idle in S0, we must enable Host interrupt to wake up
EC if it needs to service LPC bus.
This version also add a new bit of sleep_mask (SLEEP_MASK_FAN) in system.h
to prevent EC enter deep idle if fan's duty isn't zero. Normally, the freq of
PWM fan is 25 kHz. It means we must select apb2 clock as the source clock of
PWM fan. Or fan would stop when ec enters deep idle because of no PWM signal.
In hwtimer.c, we reset the preload counter to maximum value in ITEI32's ISR
since preload counter is changed by __hw_clock_source_set all the time.
We also found there're no event set if it's deadline is over 32 bits but
current source clock isn't. To prevent ec doesn't wake-up in deep-idle even if
ITIM32 expires, FW set an event for ITIM32 after process_timers().
Modified sources:
1. wheatley/board.h: Add CONFIG_LOW_POWER_S0 definition.
2. clock.c: Enable Host interrupt for LPC.
3. clock.c: Disable LP_WK_CTL for better power consumption.
4. gpio.c: Add ISR for Host interrupt.
5. uart.c: Introduce bit 6 of USTAT to make sure transmitting is completed.
6. register.h: Add uart_clear_pending_wakeup function.
7. hwtimer.c: Fixed watchdog issue when ITIM32 is closed to overflow.
8. fan.c: Enable deep sleep if duty cycle is zero.
9. include/system.h: Add SLEEP_MASK_FAN for fan control loop.
10. core/cortex-m/task.c: Add "isb" to flash the garbage data in the
instruction pipeline.
BUG=chrome-os-partner:34346
TEST=make buildall -j; test nuvoton IC specific drivers
BRANCH=none
Change-Id: Ibe3630d0d68cf3f32206adb2afa1b5958916a2be
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
Reviewed-on: https://chromium-review.googlesource.com/324651
Reviewed-by: Shawn N <shawnn@chromium.org>
There are hooks for chipset power sequencing but not one to indicate
that the system has reset at runtime. Add a hook for this and
implement for lm4 and mec1322. The hook is notified on any platform
reset, including those that happen on the way into S3/S5 state.
There is a new config variable added because the hook is notified in
the interrupt handler and needs a deferrable function that needs to
be added to every board.
BUG=chrome-os-partner:46049
BRANCH=none
TEST=tested on glados and samus
Change-Id: I3be639414e18586344e0ec84632a50dfc1df586b
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/315221
Commit-Ready: Aaron Durbin <adurbin@chromium.org>
Tested-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Shawn N <shawnn@chromium.org>
A typical EC image includes two similar in their functionality
subsections, RO and RW. CR50 has a small RO subsection, all it does -
detects a proper RW image to run and starts it up. To provide for
reliable firmware updates, the CR50 image needs to include two RW
sections, while the code is running from one RW subsection, the other
one can be upgraded.
This patch adds the ability to generate two identical RW sections,
mapped half flash size apart, and include them into the resulting EC
image.
To keep things simple the previously existing RW section's name is not
being changed, while the new (identical) RW section is named RW_B.
Two configuration options need to be defined to enable building of the
new image type: CONFIG_RW_B to enable the feature and
CONFIG_RW_B_MEM_OFF to define where RW_B should be mapped into the
flash.
A new rule added to Makefile.rules allows to generate a different lds
file from the same source (core/cortex-m/ec.lds.S) by defining a
compile time variable to pick a different base address for the
rewritable section, when RW_B is built.
BRANCH=none
BUG=chromium:43025
TEST=as follows:
- make buildall -j still succeeds
- verified that regular CR50 image starts successfully
- modified chip/g/loader/main.c to launch RW_B first, re-built and
re-run the image, observed on the console:
vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv
cr50 bootloader, 20151118_11218@80881, no USB, full crypto
Valid image found at 0x00084000, jumping
--- UART initialized after reboot ---
[Reset cause: power-on]
[Image: unknown, cr50_v1.1.4160-4c8a789-dirty 2015-12-07 18:54:27 vbendeb@eskimo.mtv.corp.google.com]
[0.001148 Inits done]
This FPGA image has no USB support
Console is enabled; type HELP for help.
> [0.002212 task 2 waiting for events...]
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
(note that the image base address is 0x840000, which is RW_B).
Change-Id: Ia2f90d5e5b7a9f252ea3ecf3ff5babfad8a97444
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/316703
Commit-Ready: Nicolas Boichat <drinkcat@chromium.org>
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
This patch introduces a facility which would allow to compile in
callbacks for arbitrary commands passed over various communication
protocols.
Typically this will be used for testing, when various test commands
are multiplexed over an existing protocol.
The callbacks are associated with 16 bit command codes. On input the
callback receives a buffer, containing the command's argument, the
size of the command argument and the maximum size of the buffer. On
output the callback stores processing result in the same buffer and
updates the size to the actual amount of returned data.
Callback descriptors are stored in a dedicated read only section which
is scanned by extension_route_command() to find a callback associated
with a certain command code.
A console channel is also being introduced to allow controlling
console output generated by extension commands handlers.
BRANCH=none
BUG=chrome-os-partner:47524
TEST=none yet
Change-Id: I8ae16a78ca7d72176a5e7f74dd7a232078e7c06c
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/312586
Reviewed-by: Randall Spangler <rspangler@chromium.org>
With the proper RO in place, RW must be signed in the same manner, as
RO. This patch makes sure that there is room in the RW header for the
signature.
BRANCH=none
BUG=chrome-os-partner:43025
TEST=with the rest of the patches applies the RO successfully boots up
the RW.
Change-Id: I1538195e0181c23c874ddd300887cf5da8c5a867
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/311421
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
The point at which we reloaded the loader was too early. When items are
placed into .bss.slow via CONFIG_REPLACE_LOADER_WITH_BSS_SLOW, other
tasks could still access their variables that may have been in that
region after we had replaced those contents with the loader. This
commit moves the reloading of the loader to as late as possible once all
tasks have done their HOOK_SYSJUMP work.
Also, fixed a bug with the .bss.slow section. If a board is not using
the config option but items are placed in that section, that part of RAM
would not be cleared out.
BUG=chrome-os-partner:46056
BRANCH=None
TEST=Enable config option on GLaDOS and add a few variables to the
.bss.slow section. 'sysjump' between RO and RW and verify that no data
bus error is encountered.
TEST=make -j buildall tests
Change-Id: I3084700b9d5c144e86e2e408b72d2e3075a67413
Signed-off-by: Aseda Aboagye <aaboagye@google.com>
Reviewed-on: https://chromium-review.googlesource.com/306173
Commit-Ready: Aseda Aboagye <aaboagye@chromium.org>
Tested-by: Aseda Aboagye <aaboagye@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Certain ECs which cannot load both the RO and RW images into memory
simultaneously have a little firmware (LFW) loader that is loaded into
the beginning of the program memory. This loader is responsible for
loading the RO/RW images, however once we begin executing code from
main(), the loader has already completed it's purpose. We can reuse
this space by allocating portions of the .bss section here. This
currently saves us 3k for mec1322. This section is .bss.slow.
To use this feature simply define the following config option in
board.h.
#define CONFIG_REPLACE_LOADER_WITH_BSS_SLOW
In some cases, such as the mec1322, this region of RAM is optimized for
code and not data. Therefore, ideally infrequently used data should go
into this region.
BUG=chrome-os-partner:46056
BUG=chrome-os-partner:46063
BRANCH=None
TEST=Flash GLaDOS; sysjump rw; Verify that we are in rw; sysjump ro;
Verify we are back in ro.
TEST=Build GLaDOS, check output memory map for LDR_REGION and .bss.slow
section.
TEST=make -j buildall tests
Change-Id: I5b95cacc211278cf780a857b5a2ecfc1a0a28c45
Signed-off-by: Aseda Aboagye <aaboagye@google.com>
Reviewed-on: https://chromium-review.googlesource.com/305254
Commit-Ready: Aseda Aboagye <aaboagye@chromium.org>
Tested-by: Aseda Aboagye <aaboagye@chromium.org>
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-by: Shawn N <shawnn@chromium.org>
Code for hard iron calibration: Every seconds (or faster if enough
samples), find a sphere that fit the compass data.
Based on Android code.
BRANCH=smaug
BUG=chrome-os-partner:39900
TEST=Check hard-iron bias is removed. Works better outside.
Change-Id: Iab479d5113b6560b4f01b0fd87373d2eecdb9b54
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/299583
Reviewed-by: Anton Staaf <robotboy@chromium.org>
For signed EC RW images (CONFIG_RWSIG), there's no point in
embedding the public key or signature into the image itself since
it will just be replaced by the signer (either as the next step
in the build process, or after the fact for MP releases). This
takes that out and just points to where the pubkey and signature
will be placed.
BUG=none
BRANCH=none
TEST=make buildall
I also checked the signatures with
futility show -t build/*/ec.bin
They still look good, and the one signed image I booted (Cr50)
works as before.
Change-Id: Ib39b7c508914851f81a1bebb2450e08ef0def76c
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/302630
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Since CONFIG_RO_SIZE and CONFIG_RW_SIZE now exist (which may
theoretically be different sizes), it is no longer useful to globally
define the size of an image.
BUG=chromium:535027
BRANCH=None
TEST=`make buildall -j`. Also, verify glados / glados_pd continue to
function as expected.
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Change-Id: Ie29959923bc5d02b4d7d6d507ff2191bcb7d24c8
Reviewed-on: https://chromium-review.googlesource.com/301743
Commit-Ready: Shawn N <shawnn@chromium.org>
Tested-by: Shawn N <shawnn@chromium.org>
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
The board-specific board.h defines things like this:
#define CONFIG_RO_SIZE 1000
#define CONFIG_RW_SIZE 1000
#define CONFIG_SHAREDLIB_SIZE 200
And in the linker scripts we define some preprocessor macros like
so:
#define FW_SIZE_(section) CONFIG_##section##_SIZE
#define FW_SIZE(section) FW_SIZE_(section)
So that we can say things like this:
FLASH (rx) : ORIGIN = FW_OFF(SECTION), LENGTH = FW_SIZE(SECTION)
Note that we have to use FW_SIZE, not FW_SIZE_
The difference is only noticeable when SECTION is #defined. If
${CFLAGS} has
-DSECTION=RW
Then the expansion is this:
FW_SIZE_(SECTION) => CONFIG_SECTION_SIZE
FW_SIZE_(RW) => 1000
There's no difference in the output for this particular CL, but
we should use the correct macro anyway to avoid confusion.
BUG=none
BRANCH=none
TEST=make buildall
Change-Id: I61edc76a1aaeb1c675b384371700f37dda39ed47
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/302150
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
Returns the most significant bit set.
Replace 31 - __builtin_clz(x), so x must be different from 0.
Use get_next_bit when not on the performance path,
on performance path set the bit field just after reading it.
BRANCH=smaug
BUG=none
TEST=compile, check Ryu still works.
Change-Id: Ie1a4cda4188f45b4bf92d0549d5c8fb401a30e5d
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/301300
CDRAM / CODERAM configs were previously used for chips which copied code
from external SPI to program memory prior to execution, and were used
inconsistently between npcx and mec1322.
These CONFIGs are now completely redundant given new configs like
CONFIG_MAPPED_STORAGE_BASE and CONFIG_EXTERNAL_STORAGE.
BRANCH=None
BUG=chrome-os-partner:23796
TEST=With entire patch series, on both Samus and Glados:
- Verify 'version' EC console command is correct
- Verify 'flashrom -p ec -r read.bin' reads back EC image
- Verify software sync correctly flashes both EC and PD RW images
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Change-Id: I0e054ab4c939f9dcf54abee8e5ebd9b2e42fe9c4
Reviewed-on: https://chromium-review.googlesource.com/297804
Commit-Ready: Shawn N <shawnn@chromium.org>
Tested-by: Shawn N <shawnn@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
When we add head room to the RO image, it's generally to provide
a chip-specific boot header of some sort. That header is only
needed for the RO image, not the RW image. The macro name implies
this, but this CL makes it so.
BRANCH=none
BUG=chrome-os-partner:43025, chrome-os-partner:44625
TEST=the cr50 image validates *and jumps to* the RW image at boot.
Change-Id: I0e5b2c32e232418970e01c7409ddcbbabd4786d5
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/296451
Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Some platforms might expect the header of the image to be a certain
platform specific blob. This patch adds an ability to insert an
arbitrary size header in the binary blob, if so desired, the intention
is to have the platform specific tools to postprocess the image and
replace the header with sensible data.
Ideally we should be able to produce an image which is mapped to start
at an offset to the FLASH_BASE, but the macros in ec.S.lds files are
way too smart for this.
BRANCH=none
BUG=chrome-os-partner:43025
TEST=with this and other changes the latest cr50 image gets signed and
booted properly.
Change-Id: Icabf00c6b90657b0ae3370ddad3567ccedf3ff49
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/295200
Reviewed-by: Shawn N <shawnn@chromium.org>
The code in core/cortex-m/init.S limits the number of installed
vectors to CONFIG_IRQ_COUNT. But the DECLARE_IRQ macro installing
interrupt servicing routines does not care about this limitation. This
results in corrupted interrupt configuration, which is hard to debug.
This patch makes sure that there is a compilation error in case
DECLARE_IRQ is passed interrupt number which out of bounds.
A similar change needs to be introduced for cortex-m0.
BRANCH=none
BUG=chromium:518898
TEST=tried building cr50 with one of interrupt numbers exceeding
CONFIG_IRQ_COUNT, observed a compilation error.
Change-Id: Ie7bc623da6bf7371579b2242064f81a83053df17
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/291843
Reviewed-by: Randall Spangler <rspangler@chromium.org>
The atomic_* functions are often used in contexts where the data they
will operate on are volatile (due to being shared between tasks or a
task and an interrupt handler). Adding volatile here makes using the
atomic_* functions a little easier in those cases and removes a cast
from the call sites (which could be obscuring a bug, if for instance
the variable was modified to be a uint16_t).
Signed-off-by: Anton Staaf <robotboy@chromium.org>
BRANCH=None
BUG=None
TEST=make buildall -j
Change-Id: I71356eb3cf2c0506df38532eee767c7d78f9240e
Reviewed-on: https://chromium-review.googlesource.com/287516
Trybot-Ready: Anton Staaf <robotboy@chromium.org>
Tested-by: Anton Staaf <robotboy@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Commit-Queue: Anton Staaf <robotboy@chromium.org>
Add ECST tool to modify the header used by npcx booter.
Modified drivers:
1. i2c.c: Modify for i2c_port design.
2. i2c.c: Fixed bugs when mutil-tasks use the same i2c port and pull-up issue.
3. hwtimer.c: Fixed bug whcih event expired time is behide current timer.
4. lpc.c: Add intializing host settings after pltrst is deasserted.
5. uart.c/clock.c/register.h: Fixed bug which cannot enter deep-idle
when gpio is any-edge trigger mode.
6. task.c: Add workaround method for hard fault issue.
7. keyboard_raw.c: Modified for support CONFIG_KEYBOARD_KSO_BASE
8. lpc.c: Modified for support CONFIG_KEYBOARD_IRQ_GPIO
9. lpc.c: fixed obe interrupt bug during 8042 initialization
10.Adjust path of flat files for new Makefile rules
11.Fixed build error on lpc.c without CONFIG_KEYBOARD_IRQ_GPIO
BUG=chrome-os-partner:34346
TEST=make buildall -j; test nuvoton IC specific drivers
BRANCH=none
Change-Id: Icf9494174b245b4026e396be877d578f36b6f6a5
Signed-off-by: Ian Chao <mlchao@nuvoton.com>
Reviewed-on: https://chromium-review.googlesource.com/284036
Reviewed-by: Shawn N <shawnn@chromium.org>
Tested-by: Shawn N <shawnn@chromium.org>
Commit-Queue: Shawn N <shawnn@chromium.org>
Implemented mec1322's heavysleep in idle task to
reduce further EC power down on S3.
MEC1322 needs sleep-enabled for all blocks to
acheive max power down including UART.
Real heavysleep will be effective only when
console/uart is not active.
To enable this commit, board-specific commit is required.
For example, check commit, "Enabling heavysleep idle task at S3".
Test:
1. Put device into S3 mode by typing 'powerd_dbus_suspend" in Linux
shell.
2. wait at least 1 min till EC console sleeps
3. measure EC power.
Since idle task is continuously scheduled, EC will enters/exits
to/from heavy sleep mode frequently in S3 and power consumption
will be changed dynamically.
For acurate power measurement, high-sampling-rate measurement
system might be required and using DMM might not give accurate
number.
BUG=None
TEST=Tested on evt1p0/evt1p7/DVT
BRANCH=None
Change-Id: I435ca347cab2f4d51cefeee802c3bf30fb393fa1
Signed-off-by: Kyoung Kim <kyoung.il.kim@intel.com>
Reviewed-on: https://chromium-review.googlesource.com/283603
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Tested-by: Alec Berg <alecaberg@chromium.org>
Commit-Queue: Alec Berg <alecaberg@chromium.org>
This commit introduces the build infrastructure changes needed for
creating a shared RO library. (libsharedobjs). The end goal is for the
library to contain various objects that can be shared with both the RO
and RW EC images.
Now, there are 3 make goals: ro, rw, and libsharedobjs.
In order for changes that are only specific to a single image (ie: RW
only) to be applied correctly, the object files are now built separately
for the RO, RW, shared objects library targets.
NOTE: Certain EC targets are incompatible with this model due to the
fact that only one image is present within flash at a time.
BRANCH=none
BUG=None
TEST=make -j buildall tests
TEST=make -j BOARD=cr50 xrefs
TEST=make BOARD=samus dis
TEST=Built samus EC image and compared that the final EC image was
identical to the upstream version (except for the git SHAs & version
strings).
CQ-DEPEND=CL:285934
Change-Id: I8e67f089710be9c6d7017718109262394bdad2f5
Signed-off-by: Aseda Aboagye <aaboagye@google.com>
Reviewed-on: https://chromium-review.googlesource.com/274079
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
Tested-by: Aseda Aboagye <aaboagye@chromium.org>
Commit-Queue: Aseda Aboagye <aaboagye@chromium.org>
This commit changes the way in which tasks are started. Instead of
having all tasks marked as ready to run upon initialization, only the
hooks task is marked as ready to run. HOOK_INITs are now run at the
beginning of the hooks task. After the HOOK_INITs, the hooks task calls
back to enable the rest of the tasks, reschedules, and proceeds as
usual. This also allows the removal of checks for task_start_called().
BUG=chrome-os-partner:27226
BRANCH=None
TEST=Built and flash EC image for samus and verified that EC boot was
successful as well as AP boot. Additionally, verified that charging,
keyboard, tap-for-battery were all still functional.
TEST=make -j buildall tests
Change-Id: Iea53670222c803c2985e9c86c96974386888a4fe
Signed-off-by: Aseda Aboagye <aaboagye@google.com>
Reviewed-on: https://chromium-review.googlesource.com/283657
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Commit-Queue: Aseda Aboagye <aaboagye@chromium.org>
Tested-by: Aseda Aboagye <aaboagye@chromium.org>
Add npcx_evb_arm board-level driver for arm-based platform.
Add header.c: for booting from NPCX5M5G A3 Booter.
Remove lfw folder due to those functionalitie have been replaced with Booter
Modified drivers for
Patch Set 1:
1. flash.c: Implement UMA lock, tri-state and selection register lock functionalities
2. hwtimer.c: Add ITIM32 for hwtimer
3. lpc.c: Add checking for LRESET
4. system.c: Modified CODERAM_ARCH functions for NPCX5M5G A3 Booter.
5. uart.c: Add support for module 2
Patch Set 2:
6. lpc.c: Modified lpc_get_pltrst_asserted() func
Patch Set 3:
7. minimize the changes for CONFIG_CODERAM_ARCH in common layer
8. comments of Patch Set1/2
Patch Set 4:
9. Modified CONFIG_RO_MEM_OFF point to ro image and keep header as a part of ec.RO.flat.
10. Fixed RO_FRID and RW_FRID issues which caused by CONFIG_CODERAM_ARCH.
Patch Set 5:
11. Modified system.c in common folder for supporting *_STORAGE_OFF.
12. Use *_STORAGE_OFF in firmware_image.lds.S to indicate flat file layout in flash.
Patch Set 6:
13. rebase to newest version
14. system.c: Modified for the newest include/system.h
Patch Set 7:
15. Merge from version 0625
BUG=chrome-os-partner:34346
TEST=make buildall -j; test nuvoton IC specific drivers
BRANCH=none
Change-Id: Ifd7c10b81b5781ccd75bb2558dc236486976e8ed
Signed-off-by: Ian Chao <mlchao@nuvoton.com>
Reviewed-on: https://chromium-review.googlesource.com/272034
Reviewed-by: Shawn N <shawnn@chromium.org>
Tested-by: Shawn N <shawnn@chromium.org>
Commit-Queue: Shawn N <shawnn@chromium.org>
This unifies all the EC header files to use __CROS_EC_FILENAME_H
as the include guard. Well, except for test/ util/ and extra/
which use __TEST_ __UTIL_ and __EXTRA_ prefixes respectively.
BUG=chromium:496895
BRANCH=none
TEST=make buildall -j
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Change-Id: Iea71b3a08bdec94a11239de810a2b2e152b15029
Reviewed-on: https://chromium-review.googlesource.com/278121
Reviewed-by: Randall Spangler <rspangler@chromium.org>
If task_get_current() is called early during initialization when we have
not yet done a context switch, our current_task pointer is invalid. Add
an assert to detect this case and put it behind CONFIG_DEBUG_BRINGUP, a
new config that's intended to enable possibly-costly pre-production
debugging.
BUG=chrome-os-partner:40677
TEST=Manual on glados. Define CONFIG_DEBUG_BRINGUP, then call i2c_write from
board_init and verify the new assert fails. Remove the i2c_write and verify
the new assert passes.
BRANCH=None
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Change-Id: I6014ccf739dcc4c8f4f960be2b89f01e423b65b5
Reviewed-on: https://chromium-review.googlesource.com/273541
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Add task_wait_event_mask() function to core/cortex-m0, core/host
and board/zinger/runtime in order to delay a task until a specific
event occurs.
BUG=none
BRANCH=smaug
TEST=make -j buildall
Change-Id: Ic89487fcae5352eec53b745179c7f0d5893ad3e0
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/276744
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Our USB buffers are just arrays of uint8_t in program RAM, so
let's treat them that way. The DMA descriptors are in normal RAM,
too.
BUG=chrome-os-partner:40693
BRANCH=none
TEST=make buildall
Change-Id: Ibafe1a557a328bbf8cf37ce113675fcd35bad376
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/273918
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Add CONFIG_LTO to use GCC Link-Time Optimizations to try to reduce the
flash footprint of the firmware.
Add additional protection to some functions/data to avoid removal by the
linker when their usage is not obvious.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BRANCH=none
BUG=none
TEST=make buildall (with and without LTO enable on all boards)
Change-Id: I586b8c1eda4592b416c85383b65153c1d5ab0059
Reviewed-on: https://chromium-review.googlesource.com/271291
Trybot-Ready: Vincent Palatin <vpalatin@chromium.org>
Tested-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Commit-Queue: Vincent Palatin <vpalatin@chromium.org>
Rename image geometry configs with a uniform naming scheme to make their
purposes more clear.
CONFIG_RO_MEM_OFF (was CONFIG_FW_RO_OFF) - RO image offset in program memory
CONFIG_RO_STORAGE_OFF (was CONFIG_RO_SPI_OFF) - RO image offset on storage
CONFIG_RO_SIZE (was CONFIG_FW_RO_SIZE) - Size of RO image
CONFIG_RW_MEM_OFF (was CONFIG_FW_RW_OFF) - RW image offset in program memory
CONFIG_RW_STORAGE_OFF (was CONFIG_RW_SPI_OFF) - RW image offset on storage
CONFIG_RW_SIZE (was CONFIG_FW_RW_SIZE) - Size of RW image
CONFIG_WP_OFF (was CONFIG_FW_WP_RO_OFF) - Offset of WP region on storage
CONFIG_WP_SIZE (was CONFIG_FW_WP_RO_SIZE) - Size of WP region on storage
BUG=chrome-os-partner:39741,chrome-os-partner:23796
TEST=Set date / version strings to constants then `make buildall -j`.
Verify that each ec.bin image is identical pre- and post-change.
BRANCH=None
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Change-Id: I6ea0a4e456dae71c266fa917a309b9f6fa4b50cd
Reviewed-on: https://chromium-review.googlesource.com/270189
Reviewed-by: Anton Staaf <robotboy@chromium.org>
Currently, ECs with internal flash store the write protect state for
RO in a separate write/erase block of flash. This is wasteful on
chips where there are not many blocks of flash.
Add a new CONFIG_FLASH_PSTATE_IN_BANK option which is defined by
default. This is the old behavior, for compatibility. (And we're
calling it 'bank' because that's what the existing code does, even if
the terminology is somewhat etymologically... bankrupt.)
If that config is #undef'd, then store the write protect flag directly
inside the RO image. This uses only 4 bytes of the RO image, instead
of an entire erase block. The magic numbers for the pstate values are
chosen such that when protecting RO, bits are only transitioned away
from their erased state. Unprotecting RO once it's protected requires
reflashing RO; it's no longer possible to 'flashwp disable'. But
that's ok, because realistically, the only reason to unprotect RO is
if you're about to flash the RO firmware anyway.
BUG=chromium:476659
BRANCH=none
TEST=Without undefining CONFIG_FLASH_PSTATE_IN_BANK, make sure everything
still works on samus and samus_pd. This ensures we didn't break the
existing functionality:
flashinfo -> no flags
flashwp enable
flashinfo -> ro_at_boot
reboot
flashinfo -> ro_at_boot
flashwp disable
flashinfo -> no flags
Then recompile with #undef CONFIG_FLASH_PSTATE_IN_BANK and test:
flashinfo -> no flags
flashwp enable
flashinfo -> ro_at_boot
reboot
flashinfo -> ro_at_boot
flashwp disable -> fails with access denied
flashinfo -> ro_at_boot
Then reflash to verify that clears the ro_at_boot flag:
flashinfo -> no flags
Change-Id: Ie794b8cfed2a10c50b0e36dcf185884070b04666
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/266095
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Trybot-Ready: Vincent Palatin <vpalatin@chromium.org>
This was causing the amount of data sent to be larger than the
total size of the descriptors.
Before this CL, connecting the Cr50 through USB gave this kernel
message:
usb 2-1.4.7: config 1 descriptor has 1 excess byte, ignoring
When the host requests the descriptor, the code in chip/*/usb.c
that handles it looks like this:
case USB_DT_CONFIGURATION: /* Setup : Get configuration desc */
desc = __usb_desc;
len = USB_DESC_SIZE;
break;
But include/usb.h has this:
#define USB_DESC_SIZE (__usb_desc_end - __usb_desc)
And both __usb_desc and __usb_desc_end come from the linker
script.
BUG=none
BRANCH=none
TEST=manual
Before this change, I built the Cr50 firmware from m/master,
tried it, and got the dmesg complaint on the host.
After this change, the dmesg complaint doesn't show up anymore.
Change-Id: I83ae2333a9e76af7acb18bd2f0e4cef5c095862a
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/265765
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
On hard reset / hibernate, RAM will be erased and panic data will
normally be lost. When software panic data saving is enabled, try to
save this data just before hard reset and restore it when we come back
up.
BUG=chrome-os-partner:37380
TEST=Manual on Samus with WP + SW sync enabled. Boot AP, then run "crash
divzero" on console. After hard reset, verify that "panicinfo" dumps
data and shows divzero exception code.
BRANCH=Samus
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Change-Id: I9516dd4b6db12ef35e512cc4710f9b97d7e663cb
Reviewed-on: https://chromium-review.googlesource.com/255912
Reviewed-by: Randall Spangler <rspangler@chromium.org>
