Some platforms might expect the header of the image to be a certain
platform specific blob. This patch adds an ability to insert an
arbitrary size header in the binary blob, if so desired, the intention
is to have the platform specific tools to postprocess the image and
replace the header with sensible data.
Ideally we should be able to produce an image which is mapped to start
at an offset to the FLASH_BASE, but the macros in ec.S.lds files are
way too smart for this.
BRANCH=none
BUG=chrome-os-partner:43025
TEST=with this and other changes the latest cr50 image gets signed and
booted properly.
Change-Id: Icabf00c6b90657b0ae3370ddad3567ccedf3ff49
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/295200
Reviewed-by: Shawn N <shawnn@chromium.org>
This commit introduces the build infrastructure changes needed for
creating a shared RO library. (libsharedobjs). The end goal is for the
library to contain various objects that can be shared with both the RO
and RW EC images.
Now, there are 3 make goals: ro, rw, and libsharedobjs.
In order for changes that are only specific to a single image (ie: RW
only) to be applied correctly, the object files are now built separately
for the RO, RW, shared objects library targets.
NOTE: Certain EC targets are incompatible with this model due to the
fact that only one image is present within flash at a time.
BRANCH=none
BUG=None
TEST=make -j buildall tests
TEST=make -j BOARD=cr50 xrefs
TEST=make BOARD=samus dis
TEST=Built samus EC image and compared that the final EC image was
identical to the upstream version (except for the git SHAs & version
strings).
CQ-DEPEND=CL:285934
Change-Id: I8e67f089710be9c6d7017718109262394bdad2f5
Signed-off-by: Aseda Aboagye <aaboagye@google.com>
Reviewed-on: https://chromium-review.googlesource.com/274079
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
Tested-by: Aseda Aboagye <aaboagye@chromium.org>
Commit-Queue: Aseda Aboagye <aaboagye@chromium.org>
Add npcx_evb_arm board-level driver for arm-based platform.
Add header.c: for booting from NPCX5M5G A3 Booter.
Remove lfw folder due to those functionalitie have been replaced with Booter
Modified drivers for
Patch Set 1:
1. flash.c: Implement UMA lock, tri-state and selection register lock functionalities
2. hwtimer.c: Add ITIM32 for hwtimer
3. lpc.c: Add checking for LRESET
4. system.c: Modified CODERAM_ARCH functions for NPCX5M5G A3 Booter.
5. uart.c: Add support for module 2
Patch Set 2:
6. lpc.c: Modified lpc_get_pltrst_asserted() func
Patch Set 3:
7. minimize the changes for CONFIG_CODERAM_ARCH in common layer
8. comments of Patch Set1/2
Patch Set 4:
9. Modified CONFIG_RO_MEM_OFF point to ro image and keep header as a part of ec.RO.flat.
10. Fixed RO_FRID and RW_FRID issues which caused by CONFIG_CODERAM_ARCH.
Patch Set 5:
11. Modified system.c in common folder for supporting *_STORAGE_OFF.
12. Use *_STORAGE_OFF in firmware_image.lds.S to indicate flat file layout in flash.
Patch Set 6:
13. rebase to newest version
14. system.c: Modified for the newest include/system.h
Patch Set 7:
15. Merge from version 0625
BUG=chrome-os-partner:34346
TEST=make buildall -j; test nuvoton IC specific drivers
BRANCH=none
Change-Id: Ifd7c10b81b5781ccd75bb2558dc236486976e8ed
Signed-off-by: Ian Chao <mlchao@nuvoton.com>
Reviewed-on: https://chromium-review.googlesource.com/272034
Reviewed-by: Shawn N <shawnn@chromium.org>
Tested-by: Shawn N <shawnn@chromium.org>
Commit-Queue: Shawn N <shawnn@chromium.org>
Our USB buffers are just arrays of uint8_t in program RAM, so
let's treat them that way. The DMA descriptors are in normal RAM,
too.
BUG=chrome-os-partner:40693
BRANCH=none
TEST=make buildall
Change-Id: Ibafe1a557a328bbf8cf37ce113675fcd35bad376
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/273918
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Rename image geometry configs with a uniform naming scheme to make their
purposes more clear.
CONFIG_RO_MEM_OFF (was CONFIG_FW_RO_OFF) - RO image offset in program memory
CONFIG_RO_STORAGE_OFF (was CONFIG_RO_SPI_OFF) - RO image offset on storage
CONFIG_RO_SIZE (was CONFIG_FW_RO_SIZE) - Size of RO image
CONFIG_RW_MEM_OFF (was CONFIG_FW_RW_OFF) - RW image offset in program memory
CONFIG_RW_STORAGE_OFF (was CONFIG_RW_SPI_OFF) - RW image offset on storage
CONFIG_RW_SIZE (was CONFIG_FW_RW_SIZE) - Size of RW image
CONFIG_WP_OFF (was CONFIG_FW_WP_RO_OFF) - Offset of WP region on storage
CONFIG_WP_SIZE (was CONFIG_FW_WP_RO_SIZE) - Size of WP region on storage
BUG=chrome-os-partner:39741,chrome-os-partner:23796
TEST=Set date / version strings to constants then `make buildall -j`.
Verify that each ec.bin image is identical pre- and post-change.
BRANCH=None
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Change-Id: I6ea0a4e456dae71c266fa917a309b9f6fa4b50cd
Reviewed-on: https://chromium-review.googlesource.com/270189
Reviewed-by: Anton Staaf <robotboy@chromium.org>
Currently, ECs with internal flash store the write protect state for
RO in a separate write/erase block of flash. This is wasteful on
chips where there are not many blocks of flash.
Add a new CONFIG_FLASH_PSTATE_IN_BANK option which is defined by
default. This is the old behavior, for compatibility. (And we're
calling it 'bank' because that's what the existing code does, even if
the terminology is somewhat etymologically... bankrupt.)
If that config is #undef'd, then store the write protect flag directly
inside the RO image. This uses only 4 bytes of the RO image, instead
of an entire erase block. The magic numbers for the pstate values are
chosen such that when protecting RO, bits are only transitioned away
from their erased state. Unprotecting RO once it's protected requires
reflashing RO; it's no longer possible to 'flashwp disable'. But
that's ok, because realistically, the only reason to unprotect RO is
if you're about to flash the RO firmware anyway.
BUG=chromium:476659
BRANCH=none
TEST=Without undefining CONFIG_FLASH_PSTATE_IN_BANK, make sure everything
still works on samus and samus_pd. This ensures we didn't break the
existing functionality:
flashinfo -> no flags
flashwp enable
flashinfo -> ro_at_boot
reboot
flashinfo -> ro_at_boot
flashwp disable
flashinfo -> no flags
Then recompile with #undef CONFIG_FLASH_PSTATE_IN_BANK and test:
flashinfo -> no flags
flashwp enable
flashinfo -> ro_at_boot
reboot
flashinfo -> ro_at_boot
flashwp disable -> fails with access denied
flashinfo -> ro_at_boot
Then reflash to verify that clears the ro_at_boot flag:
flashinfo -> no flags
Change-Id: Ie794b8cfed2a10c50b0e36dcf185884070b04666
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/266095
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Trybot-Ready: Vincent Palatin <vpalatin@chromium.org>
This was causing the amount of data sent to be larger than the
total size of the descriptors.
Before this CL, connecting the Cr50 through USB gave this kernel
message:
usb 2-1.4.7: config 1 descriptor has 1 excess byte, ignoring
When the host requests the descriptor, the code in chip/*/usb.c
that handles it looks like this:
case USB_DT_CONFIGURATION: /* Setup : Get configuration desc */
desc = __usb_desc;
len = USB_DESC_SIZE;
break;
But include/usb.h has this:
#define USB_DESC_SIZE (__usb_desc_end - __usb_desc)
And both __usb_desc and __usb_desc_end come from the linker
script.
BUG=none
BRANCH=none
TEST=manual
Before this change, I built the Cr50 firmware from m/master,
tried it, and got the dmesg complaint on the host.
After this change, the dmesg complaint doesn't show up anymore.
Change-Id: I83ae2333a9e76af7acb18bd2f0e4cef5c095862a
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/265765
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Add hook for battery state of charge change. Hook will be used
to cleanup the samus charging workarounds to follow.
BUG=none
BRANCH=samus
TEST=make -j buildall
Change-Id: I99cbb8264783802139cac689804b056623063695
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/245252
Reviewed-by: Shawn N <shawnn@chromium.org>
Add npcx_evb in board folder for testing
Add shared-spi arch support in common layer.
Modified drivers for
1. Fan.c: console command “pwmduty”.
2. Pwm.c: for the issue when set duty to 0.
3. System.c: for hw reset only during system reset.
4. Flash.c: Fixed access denied bug of the flash driver for host command.
5. Comments from Patch Set 1
6. Comments from Patch Set 3 (except sha256.c)
7. Add openocd and flash_ec support for npcx_evb
8. Add little FW and spi-flash upload FW in chip folder
9. Add optional make rules for PROJECT_EXTRA
10.Replace CONFIG_SHRSPI_ARCH with CONFIG_CODERAM_ARCH and remove changes
in common layer sources for shared-spi arch. (except sysjump)
11.Find the root cause of JTAG issue and use workaround method
with SUPPORT_JTAG in clock.c
12 Execute hibernate in low power RAM for better power consumption
13 Add workaround method for version console command
14 Modified coding style issues by checkpatch.pl tool
BUG=chrome-os-partner:34346
TEST=make buildall -j; test nuvoton IC specific drivers
BRANCH=none
Change-Id: I5e383420642de1643e2bead837a55c8c58481786
Signed-off-by: Ian Chao <mlchao@nuvoton.com>
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/233742
Allow to use larger RSA keys by setting CONFIG_RSA_KEY_SIZE to 4096 or
8192 rather than using the default 2048-bit size.
It's mainly for benchmarking purpose right now as we don't have the RAM
to store the 3x key size buffer and the flash space for the public key
structure.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BRANCH=samus
BUG=none
TEST=build Zinger with CONFIG_RSA_KEY_SIZE equals to 4096 and run it.
Change-Id: I9839121bf158d0a30dde1e48d875f345191bfec2
Reviewed-on: https://chromium-review.googlesource.com/228925
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Commit-Queue: Vincent Palatin <vpalatin@chromium.org>
Tested-by: Vincent Palatin <vpalatin@chromium.org>
Previously the USB RAM size was off by a factor of two
for chips that required 32-bit alignment of accesses,
even though the underlying memory was 16-bits in size.
This change adds an additional configuration for the
access size (it still assumes that the underlying memory
is 16-bits in size) and uses that to adjust the USB_RAM
memory section in the linker scripts.
This change also removes the default values for the USB
RAM from stm32/config_chip.h because they mask issues
when new chips are added. It is better for a new chip
to fail to compile until these values are provided.
Finally, this change introduces a common USB API header
so that common code doesn't need to include the STM32
specific header.
Signed-off-by: Anton Staaf <robotboy@chromium.org>
BRANCH=None
BUG=None
TEST=make buildall -j
Enable console on ryu_p2 and discovery-stm32f072 board
Verify that it works on both
Change-Id: Id118627f53e9e8ff1bd09fb51f1f9634ff495d19
Reviewed-on: https://chromium-review.googlesource.com/228833
Tested-by: Anton Staaf <robotboy@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Commit-Queue: Anton Staaf <robotboy@chromium.org>
This implements a new API for EC modules to define MKBP event sources
and send MKBP event to the AP. Also, a new host command
EC_CMD_GET_NEXT_EVENT is added for the AP to query the pending MKBP
events. Each event type may have custom event data sent along with the
event.
BRANCH=None
BUG=chrome-os-partner:33194
TEST=Enable MKBP event on Ryu. Set a host event from EC console, run
'ectool nextevent', and see MKBP event 0x01 (HOST_EVENT) and the set
host event.
Signed-off-by: Vic Yang <victoryang@chromium.org>
Change-Id: I28a1b7e826bcc102bbe39016c9bb3e37d125664c
Reviewed-on: https://chromium-review.googlesource.com/224905
Reviewed-by: Randall Spangler <rspangler@chromium.org>
The Zinger RW is now signed with 2048-bit RSA key (using SHA-256 as
digest).
This CL implements the verification mechanism.
note: the RSA key used for signing must be provided as a .pem file.
The path to .pem file must be provided in the PEM environment variable.
By default, it's using the dev key stored in zinger_dev_key.pem.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BRANCH=samus
BUG=chrome-os-partner:28336
TEST=on Zinger, run with properly signed RW firmware and corrupted
firmware and check the serial traces.
Change-Id: Ia58482458904a3ed72d6b0e95996cae86a0ead83
Reviewed-on: https://chromium-review.googlesource.com/220178
Commit-Queue: Vincent Palatin <vpalatin@chromium.org>
Tested-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Enough USB support to be able to enumerate the device and use bulk or
interrupt endpoints.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BRANCH=none
BUG=chrome-os-partner:28295
TEST=with the following USB console CL, connect a Fruitpie through USB
and use its console over USB.
Change-Id: I37b7f3b6a754cb82ab5f940ea20122d2e16b3b5b
Reviewed-on: https://chromium-review.googlesource.com/193983
Tested-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Todd Broch <tbroch@chromium.org>
Commit-Queue: Vincent Palatin <vpalatin@chromium.org>
Put each functions in a separate section by using -ffunction-sections,
then discard the non-referenced ones in the linker with -gc-sections.
Force keeping a few special symbols by using the KEEP() linker
directive.
This modification is not saving a lot of spaces per se, but will enable
larger code pruning with future optional features.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BRANCH=none
BUG=none
TEST=make buildall, manually check discarded symbols in the .map file
and run on Spring and Link.
The size delta is the following:
Link: total 85.7k -> 84.9k (.text 60.3k -> 59.5k)
Spring: total 59.2k -> 57.2k (.text 44.4k -> 42.5k)
Change-Id: Ib6eb0d3f2cc4fc172c9fc26acac2e486921690a3
Reviewed-on: https://chromium-review.googlesource.com/189224
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Commit-Queue: Vincent Palatin <vpalatin@chromium.org>
Tested-by: Vincent Palatin <vpalatin@chromium.org>
BSS section is usually put at the beginning of the RAM, so large
alignemnt causes the least memory usage penalty here, compared to
alignment using __attribute__((aligned(x))).
Also remove .bss.tasks and .bss.task_scratchpad, which are both not
present anymore.
BUG=chrome-os-partner:24107
TEST=Build all boards. Boot mec1322_evb.
BRANCH=None
Change-Id: Ie19b9feb76773a94f0443c2a0d39505ddef7a1df
Signed-off-by: Vic (Chun-Ju) Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/178274
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Before this change drivers had no way of knowing that a frequency
change was coming. This could cause problems for some drivers (like
i2c) that need to make sure that a transaction isn't happening while a
frequency change is happening.
The PRE_FREQ_CHANGE archiecture is very simple here and we don't allow
any way to cancel it.
At the moment, we guarantee:
- We won't call PRE_FREQ_CHANGE with interrupts disabled, so acquiring
locks / sleeping is OK.
- We'll call the actual HOOK_FREQ_CHANGE after the PRE_FREQ_CHANGE.
PRE_FREQ_CHANGE and HOOK_FREQ_CHANGE should not use deferred function
calls.
BRANCH=pit
BUG=chrome-os-partner:22093
TEST=With all patches together:
- on AP: suspend_stress_test
- on EC: battery 10000 50
Change-Id: I2731a3e85d41e749fa571fdb74b5c9b12043cda6
Signed-off-by: Doug Anderson <dianders@chromium.org>
Previous-Reviewed-on: https://chromium-review.googlesource.com/167101
(cherry picked from commit d84c0dbbf7c5a72917a820e292ecfdfa698d0fb9)
Reviewed-on: https://chromium-review.googlesource.com/167148
Reviewed-by: Randall Spangler <rspangler@chromium.org>
The power button code is platform-independent. This change splits the
code out of the LM4 switch.c module so that a subseqent change to
STM32 platforms can start using it.
BUG=chrome-os-partner:18945
BRANCH=none
TEST=manual
1. Power+refresh+esc goes to recovery mode,
2. Press power button at recovery screen turns off.
3. With system off, power button turns system on.
4. Press power button for a second; screen locks.
5. Press power button while typing; blocks keystrokes while it's pressed.
6. Hold power button down for 8 sec; system forced to shutdown.
7. From EC console, with system on:
hostevent clear
hostevent -> event 0x04 is clear
press power button
hostevent -> event 0x04 is set
8. From EC console, with system off:
powerbtn -> system turns on
powerbtn 5000 -> system turns off, just like power button was held for 5 sec
Change-Id: If2a9b02514a201e1d03c857d128e2ccab51a16ef
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/49217
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
1) Check vs. number of allowable deferred function calls is made at
link time.
2) Added a check for whether hook_call_deferred() has been made after
the start of calculating the time when the hook task should wake. If
it has, go back and recalculate the wake time. This works around a
race condition.
BUG=chrome-os-partner:18473
BRANCH=none
TEST=add a bunch of deferrable functions and recompile; generates a link error
Change-Id: Ie833e2a699c47b6702957ed67bf7d3925f2df099
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/47266
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
This is a cleaner way of deferring work from interrupt-time to
task-time without requiring a task for each module which needs this.
Replaces/supersedes delayed hook notification, which didn't scale well
(since every function would have needed to be its own hook type).
BUG=chrome-os-partner:18473
BRANCH=none
TEST=boot system. plug/unplug AC power; notifies the host properly
Change-Id: I50263fe1ce37e74c1ef8db3671379098997102ed
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/46953
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
PWM and temp sensor monitoring want to happen every second,
vs. several times a second for watchdog and LPC.
This is still considerably simpler than having tick functions declare
an interval at which they want to be called, which would require a
RAM-based array of pending tick functions and alarm times. If you
need that level of complexity, you still need a task.
BUG=chrome-os-partner:15714
BRANCH=none
TEST=temporarily add HOOK_TICK and HOOK_SECOND hooks and see that on
LM4, HOOK_TICK is called 4x a second and HOOK_SECOND is called every
second.
Change-Id: I5c09842fd356d3254021486949b2799142068b4f
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/36938
Commit-Ready: Simon Glass <sjg@chromium.org>
Adds a new HOOK_TICK event which is called every 250ms (LM4) or 500ms
(STM32). This will be used to consolidate a number of tasks which do
small amounts of work infrequently, and previously needed their own
task functions.
This CL adds the tick task; subsequent CLs will consolidate watchdog
and other tasks into tick hooks.
BUG=chrome-os-partner:15714
BRANCH=none
TEST=taskinfo shows TICK task as lowest priority
Change-Id: I9068ee99d56a5bf5c12afd86ad51998c013f4954
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/36908
Reviewed-by: Simon Glass <sjg@chromium.org>
This is better than having the 0xea byte only appended in ec.bin,
since now the byte is present in ec.RW.flat and ec.RO.flat. Needed
for EC software sync.
BUG=chrome-os-partner:12412
BRANCH=link,snow
CQ-DEPEND=30305
TEST=manual
1. xxd ec.RW.bin | tail; should end with 0xea
2. xxd -g4 build/link/ec.bin | grep -C3 454e44ea
That word should be the last one before a bunch of 0xfffffff bytes.
There should be 2 matches (since there's RO and RW firmware)
Change-Id: I0de5cc78083f1a9b49202fbe2305a3101f401db3
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/30303
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
We need a simple way to build an EC image that is binary-wise much
different from the original one, so that we can test EC update as much
thoroughly as possible. By padding useless space, we can have an image
with exactly same functionality but binary-wise different.
BUG=chrome-os-partner:10264
TEST=Build and run without error.
Change-Id: I070bec7cec71db1662238ca6af10e864c82ba428
Reviewed-on: https://gerrit.chromium.org/gerrit/26083
Reviewed-by: Yung-Chieh Lo <yjlou%chromium.org@gtempaccount.com>
Tested-by: Vic Yang <victoryang@chromium.org>
Commit-Ready: Vic Yang <victoryang@chromium.org>
When copying .data section from flash to internal RAM at startup, we
assume the content of the section is aligned on a word size in flash.
Force the alignment in the linker file.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BUG=chrome-os-partner:10823
TEST=on Link EVT, type "sysjump RO" in EC console and see you are
jumping to RO partition and not getting a watchdog reset.
Change-Id: I1a1387ef8bff01d287d85ee2a660811c9e4620c6
Reviewed-on: https://gerrit.chromium.org/gerrit/26032
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Tested-by: Vincent Palatin <vpalatin@chromium.org>
Commit-Ready: Vincent Palatin <vpalatin@chromium.org>
Instead of storing task contexts in .data and wasting several kB of
flash with mostly 0s, move them to .bss and fill the initial context at EC
startup. The runtime overhead is small enough.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BUG=chrome-os-partner:9839
TEST=run on Link and check verified boot and chromeOS startup are OK.
Change-Id: Iaef23d46a4e3e80e49886dfbf7ab1f537c587362
This simplifies the re-flashing for stm32 based platforms.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BUG=chrome-os-partner:8865
TEST=On Daisy, flashrom -p internal:bus=lpc -w ec.bin
Change-Id: I66860383c34110b1edf852929c244a2b682bc105
On platform where the flash base address is non null (e.g. stm32), we need to
take it into account.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BUG=None
TEST=On Daisy, type "sysjump A" and "version" into the EC console
and observe that the commands succeed.
Change-Id: I95596d45f6970259d19d7063f6794fae0c400ab7
(Touchscreen was already disabled in S5)
Signed-off-by: Randall Spangler <rspangler@chromium.org>
BUG=chrome-os-partner:9736
TEST=from console, 'gpioget touchscreen_resetn' in these cases:
1) system is off -> 0
2) system is on with lid open -> 1
3) system is on with lid closed -> 1
4) system is suspended with lid open -> 1
5) system is suspended with lid closed -> 1
6) system is shut back down -> 0
7) suspend system with lid open, THEN close lid -> 0
Change-Id: I5fc80b72ea9dcfbf11f5280d79ae805c2ef1b6df
The VMA of the .data segment is in RAM, but we actually put it into FLASH.
The linker doesn't notice if it runs out of flash, so it creates an invalid
image.
This adds an explicit check to be sure it all fits. It also refactors the
region declarations to be more explicit. For vboot-enabled configurations,
CONFIG_SECTION_* - describes the extent of flash for one entire image
CONFIG_FW_* - the region within the SECTION for the firmware only
CONFIG_VBLOCK_* - the region within the RW SECTIONs for the vblocks
CONFIG_VBOOT_ROOTKEY - the region within the RO SECTION for the root key
Look at chip/lm4/config.h for the best example.
BUG=chrome-os-partner:9839
TEST=manual
Build it, run it.
Change-Id: I3c652e82d58a5328115cc750c80ecba6a3fd99a3
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
And start wiring to x86_power so it can detect AC state changes
(needed to enable/disable turbo).
*YES*, this compiles for BDS/Daisy now...
Signed-off-by: Randall Spangler <rspangler@chromium.org>
BUG=chrome-os-partner:9069
TEST=plug/unplug AC power and look for "x86 AC on" / "x86 AC off" in debug log
Change-Id: I8399fab9637d6635a1c615f07448fd45b86bc25f
When the flash memory base address is not 0 (e.g. stm32), the .google
section for FMAP was badly positioned inside the EC binary.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BUG=chrome-os-partner:8865
TEST=make BOARD=daisy && make BOARD=link
manually verify the .map file for Daisy and boot patched Daisy EC with CONFIG_VBOOT
activated.
Change-Id: Ibc994d4d52e49dc7bc642a1a138ac533ededbcd3
Use the linker to sort console commands by name,
this saves execution time and memory.
BUG=none
TEST=generate several images with 5N, 5N+1, 5N-1 commands and check the
output of the "help" command.
Change-Id: Ib5d8f3bca726621c68ab152f4fa662cee355abb1
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
This is cleaner than having x86_power explicitly know about everything
else in the system that cares about power transitions.
Signed-off-by: Randall Spangler <rspangler@chromium.org>
BUG=none
TEST=boot and shutdown system; still works. Mouse powered to system is off in S5.
Change-Id: Ib673ca2d9edd5473334e7604e98b99b02b768419
Implements the on-chip flash erasing and writing functions.
The actual writing is done from a routine in internal RAM (using the
special .iram.text section) with interrupt disabled as we cannot read
flash during the writing process.
The write-protect feature is only lightly tested.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BUG=chrome-os-partner:8865
TEST=run on Daisy, from the EC console, use flasherase and flashwrite
commands and observe the results using rw command.
Change-Id: I4c64cf28b23df52b18500b42a32a7d3668d45ba6
This just reserves room. It doesn't actually perform any verification yet.
BUG=chrome-os-partner:7459
TEST=manual
make BOARD=link
dump_fmap build/link/ec.bin
Change-Id: I424db1d601a614be3dfe5abb200e24e8bc62e47e
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
this fixes the build breakage on stm32-based platforms.
In the linker script, remove the ASSERT since this macro is not designed
to work in that context and this size condition is already verified by
the linker by setting the "length" of the "FLASH" memory region.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BUG=None
TEST=make BOARD=link && make BOARD=daisy
boot on Link and Daisy
Change-Id: I08964749d44f47caa0a359bc93c303a9611e5d73
This is very basic, so you can only rely on RO_SECTION, RW_SECTION_A, and
RW_SECTION_B for now. We'll fill in more regions as we add vboot stuff.
Still, you should be able to do things like this:
flashrom -p internal:bus=lpc -r ec.bin
flashrom -p internal:bus=lpc -w ec.bin -i RW_SECTION:ec.B.flat
BUG=chrome-os-partner:8198
TEST=manual
Build the image, look for the FMAP in it.
cd src/platform/ec
make BOARD=link
dump_fmap ./build/link/ec.bin
Change-Id: I0adbbfb8e975faae805bda271873fcef46590cf4
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
This also changes shared_mem to use all the remaining RAM, instead of
reserving a fixed-size buffer.
Signed-off-by: Randall Spangler <rspangler@chromium.org>
BUG=chrome-os-partner:9161
TEST=manual
hostevent --> all masks should be 0
hostevent smi 0x12300000
hostevent --> should confirm SMI mask was set
sysjump b
hostevent --> should confirm SMI mask is still set
reboot
hostevent --> should confirm SMI mask is back to 0
Change-Id: Iccb6da6ccc93ee5036a3f478d24b717a462d9150
This covers modules which need to initialize before task_start(), but
don't particularly care in what order they're initialized.
Signed-off-by: Randall Spangler <rspangler@chromium.org>
BUG=none
TEST=if it boots, it works
Change-Id: I69829aac8d1c3c14ee04916a794b84bbf03a09eb
This will be used for sleep/wake/sysjump/etc. For now it's just wired
up to clock frequency changing.
Signed-off-by: Randall Spangler <rspangler@chromium.org>
BUG=none
TEST=manual: use nopll command, should still work
Change-Id: Iedcea5830bc18eacfd955c29b8f793aba8905dd8
