Add a new DRP policy to "freeze" the power role of each port, never
toggling automatically, though manual role swaps may still occur.
BUG=chromium:769895
BRANCH=servo
TEST=On servo_v4, verify DUT port stays in SRC role and POWER port
stays in SNK role while disconnected.
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Change-Id: Ibff3cd1ffaf0e884b030c231003763a57acbe02e
Reviewed-on: https://chromium-review.googlesource.com/715276
Commit-Ready: Shawn N <shawnn@chromium.org>
Tested-by: Shawn N <shawnn@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
On zoombini, we were taking enough power that the voltage dipped for a
little bit. This commit adds a 1 second delay after applying SPI VREF
but before actually flashing the EC.
BUG=b:65694390
BRANCH=None
TEST=`./util/flash_ec --board zoombini` still works.
Change-Id: I431cbfcc569fd5369971b06dedb85e8d5fdb9a32
Signed-off-by: Aseda Aboagye <aaboagye@google.com>
Reviewed-on: https://chromium-review.googlesource.com/722354
Commit-Ready: Aseda Aboagye <aaboagye@chromium.org>
Tested-by: Aseda Aboagye <aaboagye@chromium.org>
Reviewed-by: Shawn N <shawnn@chromium.org>
Requiring installation of the gsctool locally in the EC tree could
collide with debug versions or executables built for wrong
architectures.
Let's use the version installed in chroot and give user instructions
how to install it if it is not there.
BRANCH=cr50
BUG=none
TEST=verified that create_released_image.sh still works with the
chroot version of the tool
Change-Id: Ib155e166297d28c1660f7f33bb000b3bb8fe7a15
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/709739
Reviewed-by: Mary Ruthven <mruthven@chromium.org>
They're of really little consequence right now since an error in
verify_flash() is only followed by resource tear down and process exit.
verify_flash could gain other call-sites though, so better be safe than
sorry.
BUG=none
BRANCH=none
TEST=none
Change-Id: I5fa8276dc3b3e124dacceca1ea857430982f7567
Found-by: Coverity Scan #141761, #141762
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://chromium-review.googlesource.com/702482
Commit-Ready: Patrick Georgi <pgeorgi@chromium.org>
Tested-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-by: Chris Ching <chingcodes@chromium.org>
It was found on zoombini, when flashing via flash_ec failed, it would
prevent the board from booting as certain controls were left in their
"flashing" state. This was because these controls were missing from the
variables list which is what was used to restore the controls.
BUG=b:65694294
BRANCH=None
TEST=Attempt to flash zoombini without the flex connected. Attach the
servo flex, apply power, verify DUT boots up.
Change-Id: Ic2bc74ef1a61d4f10da6d3ceac77fbd373697838
Signed-off-by: Aseda Aboagye <aaboagye@google.com>
Reviewed-on: https://chromium-review.googlesource.com/714023
Commit-Ready: Aseda Aboagye <aaboagye@chromium.org>
Tested-by: Aseda Aboagye <aaboagye@chromium.org>
Reviewed-by: Shawn N <shawnn@chromium.org>
The usb_updater utility has long been not just an updater, and has
long been using other interfaces in addition to USB. gsctool is a much
more suitable name.
CQ-DEPEND=CL:709776
BRANCH=cr50
BUG=b:67007500
TEST=verified that make -C ./extra/usb_updater generates
./extra/usb_updater/gsctool:
$ ./extra/usb_updater/gsctool --help
Usage: gsctool [options] <binary image>
This updates the Cr50 RW firmware over USB.
The required argument is the full RO+RW image.
Options:
[...]
$
Change-Id: I3ab70c28acf3664ddefaa923a87ba1fd5c3c437b
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/709738
Reviewed-by: Mary Ruthven <mruthven@chromium.org>
For the Host Command vboot hash EC_VBOOT_HASH_GET case,
if the input parameter offset and size is 0 then change
offset to data_offset to obtain the latest hash value.
Else retain the offset to get the hash value at offset.
BUG=b:66957716
BRANCH=NONE
TEST=On Soraka, ectool echash commands
(RO, RW) should result in hash information.
Change-Id: Ife17d35b0dfeecb5ec799c9ed722ae48dbec5b5b
Signed-off-by: Jagadish Krishnamoorthy <jagadish.krishnamoorthy@intel.com>
Reviewed-on: https://chromium-review.googlesource.com/685738
Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
This will be used by the updater to first check that the touchpad
FW on AP side matches the one for which we stored hashes on EC
side.
This guarantee that we do not accidentally try to flash an
incorrect FW, which would render the touchpad non-functional.
BRANCH=none
BUG=b:63993173
TEST=make TOUCHPAD_FW=SA459C-1211_ForGoogleHammer_3.0.bin \
BOARD=hammer -j
TEST=./usb_updater2 -t
includes output of
sha256sum A459C-1211_ForGoogleHammer_3.0.bin
Change-Id: Id30ab2d7c7d7e2d0f25cc893f685d218c44c022e
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/641736
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
After mulptiple edits of the script, there is a case when bash
variable is not properly quoted, let's fix it.
BRANCH=cr50
BUG=b:64698702
TEST=verified proper tag description set by git
Change-Id: I5847437cde717bb6e1f4b672fe6008b8e6e6f4e3
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/667917
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Shawn N <shawnn@chromium.org>
With longer git SHA1s reported by git commands and longer version
strings, the entire SHA1 could be not fitting into the 32 byte version
of the VERSION string. So, instead of adding the 'dirty' marker to the
end of SHA1 let's replace the prefix dash with it in case the tree is
dirty.
This way the length of the version string does not change (as long as
the 'dirty' marker is one character long).
BRANCH=cr50
BUG=b:64698702
TEST=verified output of running getversion.sh with a clean tree
$ ./util/getversion.sh | grep VERSION32
#define CROS_EC_VERSION32 "_v1.1.7046-591608e2e"
and a 'dirty' tree
$ ./util/getversion.sh | grep VERSION32
#define CROS_EC_VERSION32 "_v1.1.7046+591608e2e"
Change-Id: I42684522beaff9e9714206cfaddaf97e6cd644be
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/665958
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Based on the passed TOUCHPAD_FW parameter to the make command, the
build system generates hashes for the touchpad FW.
To generate the hashes, gen_touchpad_hash splits the touchpad FW
in blocks of CONFIG_UPDATE_PDU_SIZE, that are hashed individually
(SHA-256), and then stored in the EC image.
This will allow the USB updater code to verify the integrity of
the touchpad firmware being flashed.
When no FW is provided, zeros are output, which do not match
any valid data.
BRANCH=none
BUG=b:63993173
TEST=make TOUCHPAD_FW=SA459C-1211_ForGoogleHammer_3.0.bin \
BOARD=hammer -j
TEST=Using variations of
make TOUCHPAD_FW=SA459C-1211_ForGoogleHammer_3.0.bin \
BOARD=hammer -j
make TOUCHPAD_FW=SA459C-1211_ForGoogleHammer_4.0.bin \
BOARD=hammer -j
make BOARD=hammer -j
Check that TPHASH touchpad_fw_hash.h is only regenerated when
the parameter changes.
Change-Id: Ie347270aa9c00342de13489c9422e45e681b94c2
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/615321
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
The script tries to determine the upstream branch name, and finds out
which is the first sha1 of the current branch.
Then the script tags the branch and generates a git command strings
the operator is supposed to check for sanity and enter to push the new
tag to the server.
With the new tag set each following run of ./util/getversion.sh would
generate version strings including the new tag name and number of
patches above the branch point.
More implementation details are included in the comments in the
script.
BRANCH=cr50
BUG=b:64698702
TEST=tried the script in cr50 and gru firmware branches:
cr50$ <path to>/tagbranch.sh
A new tag 'v1.9308_B.0' has been set. Use the following command
to push it to the server
git push --tags https://chromium.googlesource.com/chromiumos/platform/ec v1.9308_B.0
Or if you want to delete it:
git tag -d v1.9308_B.0
cr50$ ./util/getversion.sh | grep -w VERSION
#define VERSION "_v1.9308_B.192-b5c9d0aa7"
cr50$
cr50$ cd <path/to>gru
gru$ <path to>/tagbranch.sh
A new tag 'v1.8785_B.0' has been set. Use the following command
to push it to the server
git push --tags https://chromium.googlesource.com/chromiumos/platform/ec v1.8785_B.0
Or if you want to delete it:
git tag -d v1.8785_B.0
es^o: ~/new_projects/gru-8785/src/platform/ec 175 > ./util/getversion.sh | grep -w VERSION
gru$ #define VERSION "_v1.8785_B.218-5d857ed8c"
gru$
Change-Id: I0c0067f6b7bb837a0c119bc14ff48cb9223a3fa5
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/656575
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
The self signed images generated when running 'make BOARD=cr50' use
constant default values for the epoch, major and minor image header
fields. For the purposes of continuous testing we need the generated
images have sensible values in those header fields.
Since adding a full blown C++ based parser to the signer image is too
much trouble, let's just have a very basic Python based parser, which
pays attention only to the required fields from the current manifest.
BRANCH=cr50
BUG=none
TEST=built the new image and checked its version:
$ make BOARD=cr50
...
$ ./extra/usb_updater/usb_updater -b build/cr50/ec.bin
read 524288(0x80000) bytes from build/cr50/ec.bin
RO_A:0.0.23 RW_A:0.0.23[00000000:00000000:00000000] RO_B:-1.-1.-1 ...
Change-Id: I822475ed0a3c481b08e9268f9c13663b0b132d4a
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/651132
Reviewed-by: Marius Schilder <mschilder@chromium.org>
Reviewed-by: Mary Ruthven <mruthven@chromium.org>
Chromebox ECs performs EFS: verifying firmware before the AP boots.
This patch updates host commands which are required for the EFS.
The change includes:
* Update EC_CMD_FLASH_REGION_INFO to accept EC_FLASH_REGION_UPDATE
* Update EC_CMD_VBOOT_HASH to accept EC_VBOOT_HASH_OFFSET_UPDATE
When EC_FLASHS_REGION_UPDATE is specified, EC_CMD_FLASH_REGION_INFO
returns the slot which currently is not hosting a running RW copy.
When EC_VBOOT_HASH_OFFSET_UPDATE is specified, EC_CMD_VBOOT_HASH
computs the hash of the update slot. This hash covers the entire
region, including the signature at the end.
This patch undefines CONFIG_CMD_USBMUX and CONFIG_CMD_TYPEC
for gru to create space.
BUG=b:65028930
BRANCH=none
CQ-DEPEND=CL:648071
TEST=On Fizz, verify:
1. RW_B is old and updated by soft sync. RW_B is activated and
executed after reboot. System continues to boot to OS.
2. RW_A is old and updated by soft sync. RW_A is activated and
executed after reboot. System continues to boot to OS.
Change-Id: I9ece907b764d07ce94054ba27996e048c665a80a
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/648448
export_taskinfo is a utility used by the stack analyzer.
This patch makes sure it will be recompiled when the EC code changed.
BUG=none
BRANCH=none
TEST=make BOARD=eve -j && make BOARD=eve analyzestack
Add a fake task in board/eve/ec.tasklist
make BOARD=eve -j && make BOARD=eve analyzestack
The fake task shows in the report
Change-Id: I57c2700610680975571d254e0059571556f184fe
Signed-off-by: Che-yu Wu <cheyuw@google.com>
Reviewed-on: https://chromium-review.googlesource.com/651449
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Add the extra dependencies to "deps-y" and include it in "deps".
BUG=chromium:761922
BRANCH=none
TEST=Add "$(info $(deps))" before "-include $(deps)" in Makefile.rules
make BOARD=eve utils | grep "build/eve/util/usb_pd_policy.o.d"
There is "build/eve/util/usb_pd_policy.o.d"
Change-Id: I77670a8e90a1a913943fcba143402318aaf7d274
Signed-off-by: Che-yu Wu <cheyuw@google.com>
Reviewed-on: https://chromium-review.googlesource.com/649455
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
The chromeos-cr50 ebuild does not install dev images any more, and
chromeos-cr50-scripts do not try updating dev versions of H1 any more.
Let's stop releasing dev Cr50 images.
BRANCH=Cr50
BUG=none
TEST=tried creating a release image in the release branch, got a
tarball of the desired contents:
$ tar tf cr50.r0.0.10.w0.0.22_ZZAF_ffffffff_00007f80.tbz2
cr50.r0.0.10.w0.0.22_ZZAF_ffffffff_00007f80/
cr50.r0.0.10.w0.0.22_ZZAF_ffffffff_00007f80/cr50.bin.prod
Change-Id: Ib2acaf5f31f7067a98c35c0ec83e730736398a7d
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/624193
Reviewed-by: Mary Ruthven <mruthven@chromium.org>
New released images need higher version number.
BRANCH=none
BUG=none
TEST=built and ran an image, verified version number to be right.
Change-Id: I0b5b690d84b2f281752ad01b154efdebeba2e136
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/621296
Reviewed-by: Mary Ruthven <mruthven@chromium.org>
The STM32F76x is really close to the STM32F4 family, so the most concise
implementation is just using CHIP_FAMILY_STM32F4 and adding
CHIP_VARIANT_F76X.
Tune the clock settings to 180 Mhz CPU clock as the goal is performance.
(over-drive is not implemented yet to get to 216 Mhz)
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BRANCH=none
BUG=none
TEST=ran on nucleo-f767zi board.
'make BOARD=nucleo-f767 flash', the red LED is on and the green LED
turns on/off when pressing the user button, UART console works properly.
Change-Id: I1f67df3aec874c965c81188df46c72de210728d9
Reviewed-on: https://chromium-review.googlesource.com/612750
Commit-Ready: Vincent Palatin <vpalatin@chromium.org>
Tested-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Shawn N <shawnn@chromium.org>
On Goobuntu, the uapi copy of spidev.h doesnot contain
SPI_IOC_WR_MODE32, however the kernel supports the IOCTL.
To be able to build the tool outside of the ChromeOS chroot,
define it if it's not available.
Signed-off-by: Stefan Reinauer <reinauer@google.com>
BRANCH=none
TEST=make buildall -j outside of the chroot
BUG=b:35567067
Change-Id: I04ec968e221c7d43f1bdb364a195d371370ec886
Reviewed-on: https://chromium-review.googlesource.com/614645
Commit-Ready: Stefan Reinauer <reinauer@google.com>
Tested-by: Stefan Reinauer <reinauer@google.com>
Reviewed-by: Martin Roth <martinroth@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Add a shared library to export task information.
Modified the stack analyzer to get information from the shared library.
Show allocated stack sizes of tasks in the stack analyzer.
To get the all task information (including the allocated stack size),
A shared library is added and compiled with the board to export all
configurations of the tasklist.
BUG=chromium:648840
BRANCH=none
TEST=extra/stack_analyzer/stack_analyzer_unittest.py
make BOARD=elm && extra/stack_analyzer/stack_analyzer.py \
--objdump=arm-none-eabi-objdump \
--addr2line=arm-none-eabi-addr2line \
--export_taskinfo=./build/elm/util/export_taskinfo.so \
--section=RW \
./build/elm/RW/ec.RW.elf
make BOARD=${BOARD} SECTION=${SECTION} analyzestack
Change-Id: I72f01424142bb0a99c6776a55735557308e2cab6
Signed-off-by: Che-yu Wu <cheyuw@google.com>
Reviewed-on: https://chromium-review.googlesource.com/611693
Reviewed-by: Nicolas Boichat <drinkcat@chromium.org>
When CONFIG_USB_PD_MAX_SINGLE_SOURCE_CURRENT is defined for a board, as
its name implies, the board can source a higher current if there is
only one port acting as a source.
This commit fixes an issue with selecting the right source capability
message to advertise. charge_manager_get_source_pdo() was simply
checking if there was more than one sink connected, instead of checking
if there were any *other* sinks connected. In the event that a sink
was connected to a different port, we would advertise the max source
PDO.
BUG=b:64037926, b:35577509
BRANCH=gru,eve,reef
TEST=Connect sink to port 1. Connect a AMA to port 0 that claims that
VBUS isn't necessary. Start sending source caps, verify that the max
PDO is not being advertised in the source caps.
Change-Id: Ie4145ecaf98d5b9070ad3e8b139e5653685fa801
Signed-off-by: Aseda Aboagye <aaboagye@google.com>
Reviewed-on: https://chromium-review.googlesource.com/610479
Commit-Ready: Aseda Aboagye <aaboagye@chromium.org>
Tested-by: Aseda Aboagye <aaboagye@chromium.org>
Reviewed-by: Shawn N <shawnn@chromium.org>
The board ID fields are displayed by the Cr50 console command 'bid' as
follows: <board id>:<board id mask>:<board id flags>.
Make sure the user passes them in the same order when invoking the signer
to sign a board locked image.
BRANCH=none
BUG=none
TEST=verified proper order of the fields when generating and using a
prod signed image.
Change-Id: Ia4569c5e9e663b26edaa591bae881c719c4f199c
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/604218
Reviewed-by: Mary Ruthven <mruthven@chromium.org>
There are none cros_ec devices running EC codebase connected to
chromebook, which can be accessed by ectool with
`cros_ec --name=SOME_DEV ...`.
In the case when SOME_DEV is not found, do not fallback to other
communication methods such as LPC or I2C, since ectool will instead get
the reply of real cros_ec device.
BRANCH=none
BUG=b:64468324
TEST=on poppy, `ectool --name=cros_tp version` should show:
`Unable to establish host communication
Couldn't find EC`
Change-Id: I2ac232122e0f928703f7607da365d5c1dc6f7194
Signed-off-by: Wei-Ning Huang <wnhuang@google.com>
Reviewed-on: https://chromium-review.googlesource.com/604977
Commit-Ready: Wei-Ning Huang <wnhuang@chromium.org>
Tested-by: Wei-Ning Huang <wnhuang@chromium.org>
Reviewed-by: Nicolas Boichat <drinkcat@chromium.org>
Recent signer improvements allow to include hex values into the
manifest, this also makes it easier to process values with bid D31
set, let's use strings instead of ints.
BRANCH=none
BUG=none
TEST=verified signing of a prod release
Change-Id: Ia05198991bfdd8dfd831545a9edf70f1e06f24f4
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/604217
Reviewed-by: Mary Ruthven <mruthven@chromium.org>
If flash_ec was run without `servod` running and servod is needed, an
error message is printed out.
ERROR: Cannot communicate with servo. is servod running ?
However, in the case of flashing an stm32 without servod running,
execution would continue and would lead to claim_pty freezing and
thawing a bunch of unrelated processes. I believe the reason is that
the "die" was run in a subshell and therefore execution continued.
This commit now changes the way that servo_ec_uart_pty() works. If no
PTY is found, then flash_ec exits printing out the error message.
Additonally, claim_pty() will now warn if no arguments are passed to it
instead of finding random victims.
BUG=chromium:751386
BRANCH=maybe some fw branches.
TEST=Without servod running, try `./util/flash_ec --board hammer`;
Verify that flash_ec exists after the call to die.
Change-Id: I50784e0c43bbf0e32d408261cb83029377b576a0
Signed-off-by: Aseda Aboagye <aaboagye@google.com>
Reviewed-on: https://chromium-review.googlesource.com/598506
Commit-Ready: Aseda Aboagye <aaboagye@chromium.org>
Tested-by: Aseda Aboagye <aaboagye@chromium.org>
Reviewed-by: Nicolas Boichat <drinkcat@chromium.org>
this adds CLI support for the new PD_CHIP_ON subcommand of
ec_pd_control_cmd.
TEST=rebuilt ectool to see if "ectool pdcontrol on" does something useful.
copied new build to electro:
ec> i2cxfer rlen 0 0x50 1 0x10
Unknown error
Usage: i2cxfer r/r16/rlen/w/w16 port addr offset [value | len]
ec>
ap$ /tmp/ectool pdcontrol on 0
ec> i2cxfer rlen 0 0x50 1 0x10
Data: aa2934ad000000000000010000050500
ec>
so, "pdcontrol on" had the desired effect of bringing the chip
out of sleep mode.
BRANCH=none
BUG=b:35586895
Change-Id: I5275254fe797dda921a352b72f1683e1967efe58
Signed-off-by: Caveh Jalali <caveh@google.com>
Reviewed-on: https://chromium-review.googlesource.com/599361
Reviewed-by: Shawn N <shawnn@chromium.org>
One of the items that the presubmit check checks is that if any source
file has been modified, the unit tests are run again. However, flash_ec
is included in the list of files. This commit removes flash_ec from the
candidates because it's not run in any unit tests anyways and it's a
shell script that is not compiled.
Additionally, ignore changes to the presubmit_check.sh itself.
BUG=None
BRANCH=None
TEST=modify flash_ec, verify that presubmit check doesn't complain about
not running make buildall.
Change-Id: I473f269c7f0bba9be3216fcec39f266d896fb908
Signed-off-by: Aseda Aboagye <aaboagye@google.com>
Reviewed-on: https://chromium-review.googlesource.com/598505
Commit-Ready: Aseda Aboagye <aaboagye@chromium.org>
Tested-by: Aseda Aboagye <aaboagye@chromium.org>
Reviewed-by: Nicolas Boichat <drinkcat@chromium.org>
When an image with non-default board ID fields is released, the
generated tarball name should include the Board ID values to allow to
tell between images of the same version locked for different boards.
BRANCH=none
BUG=none
TEST=ran create_released_image.sh with and without specifying Board ID
fields, observed properly named file generated in both cases
Change-Id: I5f60a0e547d93c78caee34a9c307fc93f824b2ae
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/597121
Reviewed-by: Caveh Jalali <caveh@google.com>
Reviewed-by: Nick Sanders <nsanders@chromium.org>
The new signer (version: 1.2 00840c1b6) allows hex values in the
manifest, which means there is no need to explicitly convert the
values before adding them to the manifest.
A nice side effect of this is the fact that there is no need to care
about the sign of the values any more, the signer does the right
thing.
BRANCH=none
BUG=none
TEST=built an image using the following invocation:
$ make BOARD=cr50 H1_DEVIDS='0x12009015 0x90e95664' -j
and successfully ran it on a device. Note that the old signer was
chocking on hex values exceeding 0x7fffffff, the new one handles
them properly.
Change-Id: I08c0339f922d287c82d56fb51570bfbf7107531e
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/598728
Reviewed-by: Nick Sanders <nsanders@chromium.org>
There have been some new methods added to servod to retrieve the serial
numbers of the servos attached. Prior to this, with a servo micro
connected to a servo v4, retrieving the serial number would always
return that of the servo v4. This would cause flashing to fail. This
change updates the method to retrieve the serial numbers.
CQ-DEPEND=CL:597209
BUG=chromium:740026
BRANCH=maybe some fw branches.
TEST=With updated hdctools, flash a kevin using a servo micro connected
to a servo v4.
TEST=Flash kevin with a servo v2.
TEST=Attempt to flash a hammer and verify that the only issue is
stm32mon not being able to determine the startup of the monitor mode
(since I don't actually have a hammer).
Change-Id: I82c2907d689311fe65717a833390b8d0f6e15a94
Signed-off-by: Aseda Aboagye <aaboagye@google.com>
Reviewed-on: https://chromium-review.googlesource.com/597211
Commit-Ready: Aseda Aboagye <aaboagye@chromium.org>
Tested-by: Aseda Aboagye <aaboagye@chromium.org>
Reviewed-by: Nicolas Boichat <drinkcat@chromium.org>
The script assumes that usb_updater is present in the PPATH, but it is
not guaranteed to be available.
Use the version from the ec tree or stop if it is not available.
BRANCH=none
BUG=none
TEST=verified that the script uses proper instance of usb_updater
Change-Id: I3b861953e8d5d509b99131685e86aaf7a0693d23
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/597120
Reviewed-by: Caveh Jalali <caveh@google.com>
Reviewed-by: Mary Ruthven <mruthven@chromium.org>
Instead of invoking $(basename $0) multiple times, cache it in a
variable.
BRANCH=none
BUG=none
TEST=verified that the script still reports proper name when printing
error messages.
Change-Id: Iabdf40592cb4cecc975a48d93169f46614ce84c6
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/597119
Reviewed-by: Caveh Jalali <caveh@google.com>
Reviewed-by: Mary Ruthven <mruthven@chromium.org>
This version will be bettter sutied for chip manufacturing environment
(no contention with the test rig GPIO settings and formal confirmation
of successful certificate installation).
BRANCH=cr50
BUG=b:63686091
TEST=none
Change-Id: I6d394493b824c9d79bca4785d3d44b33f322b899
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/583990
Reviewed-by: Mary Ruthven <mruthven@chromium.org>
Allow host to request a higher-power S3 variant, "wakeable S3", in which
more wakeup sources will be enabled by the EC. The actual implementation
and list of wake sources is left up to the chipset power driver and/or
board code.
BUG=b:63037490
BRANCH=gru
TEST=With subsequent commit, compile on scarlet w/ power sequencing
version = 2.
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Change-Id: I469f0cd969052f173cb176196bb6d05f6f76fdb5
Reviewed-on: https://chromium-review.googlesource.com/572210
Commit-Ready: Shawn N <shawnn@chromium.org>
Tested-by: Shawn N <shawnn@chromium.org>
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
Reviewed-by: Philip Chen <philipchen@chromium.org>
