Implement a driver to trigger a watchdog reboot if we are stuck
somewhere. Also display a nice warning when we reach half of the
watchdog period.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BRANCH=none
BUG=none
TEST=On the console, type "waitms 500" and see nothing,
type "waitms 2000" and see the watchdog warning.
Type "waitms 4000" and see the warning, the platform rebooting.
Change-Id: Iac5d0100febd5eab1ae6cfac5a47ff728ebda3a6
Reviewed-on: https://chromium-review.googlesource.com/233430
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Commit-Queue: Vincent Palatin <vpalatin@chromium.org>
Tested-by: Vincent Palatin <vpalatin@chromium.org>
Trybot-Ready: Vincent Palatin <vpalatin@chromium.org>
CL to migrate the flashing VDMs from zinger's custom vdm to
common/usb_pd_flash.c such that other updateable type-C devices can
share.
Additionally adds gaskets to call standard runtime flashing facilities
for USB-PD devices using it.
Signed-off-by: Todd Broch <tbroch@chromium.org>
BRANCH=samus
BUG=chrome-os-partner:31192,chrome-os-partner:31193
TEST=manual,
Try following:
1. From samus_pd console w/ zinger in port 1
pd 1 flash version
pd 1 flash reboot
pd 1 flash info
2. From samus linux prompt w/ zinger in port 1
ectool --name cros_pd flashpd 1 1 <zinger RW payload>
Reading 16384 bytes from
/usr/local/zinger_v1.1.2528-d809e42.ec.RW.bin...
Erasing expected RW hash
Rebooting
Erasing RW flash
Writing RW flash
Rebooting PD into new RW
Complete
3. Repeat 1&2 above on hoho & dingdong.
Change-Id: I018055fa9de128f937c57debdc21dea026137bcf
Reviewed-on: https://chromium-review.googlesource.com/231835
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Tested-by: Todd Broch <tbroch@chromium.org>
Commit-Queue: Todd Broch <tbroch@chromium.org>
dingdong/hoho have no capability to measure VBUS which is advantageous
in determining what timeouts to honor. Previously we simply assumed
vbus was on and that made things happy until,
e0c80ac pd: on hard reset go to a hard reset recovery state
which introduced proper handling around sink & source reset recovery.
With VBUS assumed 'on' this leads to short timeouts chosen
(PD_T_SAFE_0V) which in turn causes sink to resend hard resets before
source has had time (PD_T_SRC_RECOVER) to handle request.
This change creates config CONFIG_USB_PD_NO_VBUS_DETECT for devices
without the capability to account for lack of VBUS detect.
Signed-off-by: Todd Broch <tbroch@chromium.org>
BRANCH=samus
BUG=chrome-os-partner:34090
TEST=manual
from samus_pd 'pd 1 flash reboot' is successful
Change-Id: I9ef9b0115c7be6c56c64556d2ce8c296f95c614e
Reviewed-on: https://chromium-review.googlesource.com/233024
Tested-by: Todd Broch <tbroch@chromium.org>
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Commit-Queue: Todd Broch <tbroch@chromium.org>
Our pericom charge detectors can reset themselves on rapid charger plug
/ unplug, which resets the interrupt enable to the power-on default
(off). Work around this problem by re-enabling pericom interrupts from
the VBUS interrupt.
BUG=chrome-os-partner:33823
TEST=Manual on samus. Rapidly plug + unplug charger, verify that Pericom
continues to trigger interrupts.
BRANCH=Samus
Change-Id: I7370525e28c59bdde3765e52523d5158d1d6175d
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/231700
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Add active charge port for the PD status exchange so that EC
knows which port we are currently charging from.
BUG=chromo-os-partner:32227
BRANCH=samus
TEST=load onto samus. use "pdcmd 0x100 0 0"
from EC console to read the active charge port and
verify that it matches which port we are charging from.
Change-Id: I419befef8f0a14ca2da237be1a4944fd08733b83
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/231349
Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org>
Remove host_event_commands.c from build to save flash space. The
PD MCU does not use host event infrastructure and instead has a
simple gpio line it uses to notify EC that it has info to share.
BUG=none
BRANCH=samus
TEST=make buildall. view the .map file and see we save about 700
bytes of flash.
Change-Id: I71b8a4e32b9ecb57eb1a57f6d28652476ee6afe6
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/231444
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Change zinger/minimuffin product type from AMA to
undefined.
BUG=none
BRANCH=samus
TEST=make buildall. load onto zinger, plug in samus, see:
SVDM/4 [1] ff008041 040018d1 00000000 50120001
[19.163111 DONE]
Verify ID header, 2nd word, bits 27-29 are product type,
where 0 is undefined.
Also verify that product VDO is present, 4th word.
Change-Id: I34a70d9356b5a8ee7ad64a4e8f072d7748aa916e
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/231172
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Todd Broch <tbroch@chromium.org>
Remove dualrole power capable flag from source/sink cap packets
so that samus/ryu default to drawing power from plankton.
BUG=none
BRANCH=samus
TEST=load on plankton. select 20V to DUT, attach samus or ryu
and see that it charges
Change-Id: I3d31b14f65ee8dfa4d817d47598c505b0f6d7479
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/231342
Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org>
For P3, we'll use PI3USB9281A, which fixes the I2C clock problem. Let's
remove the workaround and leave the clock enabled all the time.
BRANCH=Ryu
BUG=chrome-os-partner:31526
TEST=Boot on Ryu
Signed-off-by: Vic Yang <victoryang@chromium.org>
Change-Id: I05a3ebbff82282b69e3c5573608e500a34d370c0
Reviewed-on: https://chromium-review.googlesource.com/231180
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Ensure that the PD source changes the output voltage after
tSnkTransition delay after having sent the ACCEPT message
(rather than before).
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BRANCH=samus
BUG=chrome-os-partner:33684
TEST=connect Zinger to a PD power sink and monitor VBUS and CC while
doing a 20V to 5V transition.
Change-Id: If86f59eec67630491f4e8dc13a52015ac2de918a
Reviewed-on: https://chromium-review.googlesource.com/230805
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Commit-Queue: Vincent Palatin <vpalatin@chromium.org>
Tested-by: Vincent Palatin <vpalatin@chromium.org>
If USB hub is connected to the type-C port, we need to reset the hub
whenever a cable plugs in. Otherwise, USB3.0 may fail to enumerate.
BRANCH=None
BUG=None
TEST=Plug/unplug cable and measure hub reset signal.
Change-Id: I60f67c83653d532971ee156914fe6ae0ecdb8d3a
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/229490
Reviewed-by: Pin-chih Lin <johnylin@chromium.org>
Reviewed-by: Alec Berg <alecaberg@chromium.org>
The role of hoho & dingdong is UFP, and the corresponding protocol
fields in VDO (vdo_idh) should reflect it.
Fix error in IDH_PTYPE definitions of SVDM Identity Header, it's reversed
Adds more legible names to protocol field constants
BUG=none
BRANCH=none
TEST=make buildall
Change-Id: Idac9327bf3e8e9597221654bce80bb311b3304af
Reviewed-on: https://chromium-review.googlesource.com/230657
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Reviewed-by: Todd Broch <tbroch@chromium.org>
Commit-Queue: Bernard Shyu <bernard_shyu@bizlinktech.com>
Tested-by: Bernard Shyu <bernard_shyu@bizlinktech.com>
Add commands to send PD packets and to tweak individual parameters (TX
clock frequency, RX detection threshold, resistors on CCx).
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BRANCH=none
BUG=chrome-os-partner:28337
TEST=verify that the PD sniffing is still working by dumping traffic
between Zinger and Samus.
Connect Twinkie to Zinger, set Rd by using "tw res NONE RD" and see VBUS
going to 5V (reading it using "ina 0").
Send a BIST mode 2 request using the following command :
tw send 2 0x1043 50000000
and see the other end starting sending BIST.
Change-Id: I3c8ddf858435ac1c17a43f59351bbaa69603a209
Reviewed-on: https://chromium-review.googlesource.com/227778
Reviewed-by: Todd Broch <tbroch@chromium.org>
Commit-Queue: Vincent Palatin <vpalatin@chromium.org>
Tested-by: Vincent Palatin <vpalatin@chromium.org>
Force enabling STOP mode when we have a power contract etablished but
the sink is consuming a low current (<500mA).
As a side effect, when the STOP mode is on, the fast OCP is no longer
reacting fast because the analog watchdog ADC conversion will only
happen on the next wake-up (dozens of milliseconds).
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BRANCH=samus
BUG=none
TEST=run on Zinger with the UART RX used as debug GPIO to record STOP
mode entry/exit.
Change-Id: If78b2651862782cee45cfcdb22425b94f1eee678
Reviewed-on: https://chromium-review.googlesource.com/230341
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Reviewed-by: Todd Broch <tbroch@chromium.org>
Commit-Queue: Vincent Palatin <vpalatin@chromium.org>
Tested-by: Vincent Palatin <vpalatin@chromium.org>
Extend the Zinger runtime to take into account the disable_sleep()
issued by the USB protocol stack and avoid going into deep-sleep while
connected.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BRANCH=samus
BUG=none
TEST=connect Zinger to a PD power sink (Twinkie) and monitor the stop
mode entry/exit on a GPIO.
Change-Id: I04e35fdd65f3be3da7a4304dc1a92e6268930888
Reviewed-on: https://chromium-review.googlesource.com/230340
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Commit-Queue: Vincent Palatin <vpalatin@chromium.org>
Tested-by: Vincent Palatin <vpalatin@chromium.org>
For samus, use learn mode on BQ24773 to avoid the soft start that
causes backboosting on some boards.
BUG=chrome-os-partner:33644
BRANCH=samus
TEST=tested in EE lab on a board that was backboosting reliable.
this fixes backboosting at 5V, and also on 20V to 5V transitions.
Change-Id: I97c52a55ba07662d444e67bfbc9ca488b530f423
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/229282
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Fix task_wait_event() so that it only wakes when an event is received
or on timeout. Currently it wakes up on any interrupt, which can cause
subtle timing issues with PD communication.
BUG=none
BRANCH=samus
TEST=load onto samus, see it negotiate for 20V a few times
Change-Id: Ia1268a1ac902433433949269d779ef11403eeae3
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/226811
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
With this change we can use power event to configure sensors
and trigger motion detection in suspend.
BUG=chrome-os-partner:31071
BRANCH=ToT
TEST=Check power states. Check power up messages and commands are
present at the console.
Message at boot:
[0.007142 hash start 0x00010000 0x000096dd]
[0.007293 Inits done]
[0.007506 power state 2 = S3, in 0x0000]
[0.007765 power state 3 = S0, in 0x0000]
[0.007908 event set 0x00002000]
[0.008021 hostcmd init 0x2000]
[0.146870 hash done
f87d7824b439db923d270df016af5aabec51b73505b7c4faa6e40c16b12dd392]
Change-Id: I9c56fe5203506462f0820bbc8a5fe4528f6805ac
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/226881
Reviewed-by: Sheng-liang Song <ssl@chromium.org>
Reviewed-by: Alec Berg <alecaberg@chromium.org>
MOTIONSENSE_CMD_DUMP is deprecated, replaced with MOTIONSENSE_CMD_GET_DATA
Also use vector_3_t instead of x,y,z
ectool motionsense commands only work with newer firmware, to
handle a dynamic number of sensors.
- The host sends the number of sensor it has allocated space for.
- If 0, the EC just sends the number of sensors available
- Otherwise returns sensor information up to the limit imposed by the host.
Remove MOTIONSENSE_GET_STATUS: not needed. It is only useful for LPC,
to guarantee atomicity of the data.
Remove MOTIONSENSE_GET_DATA: not needed since we increase the version
number of MOTIONSENSE command.
BUG=chrome-os-partner:31071,chromium:430792
BRANCH=ToT
TEST=Compile. On a firmware that support the new command:
/usr/sbin/ectool --name=cros_sh motionsense
Motion sensing active
Sensor 0: 92 15 1030
Sensor 1: -94 -63 718
/usr/sbin/ectool --name=cros_sh motionsense active
0
On a machine with older firmware (samus), check these
functions are not working anymore.
Change-Id: I64b62afff96670fb93457760d43d4e64e26e029f
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/226880
Reviewed-by: Alec Berg <alecaberg@chromium.org>
The minor revision was accidentally set back to 0 in CL:229622. Restoring
back to 1.
BUG=none
BRANCH=samus
TEST=load onto zinger, make sure minor revision is set to 1
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Change-Id: Ia934e4a6f1674f666defe9e4337dee45cd7ab7bd
Reviewed-on: https://chromium-review.googlesource.com/229985
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Add a Google Firmware Update alternate mode to zinger. This mode must
be entered in order to allow the unstructured VDMs that we use for
sending a new firmware.
BUG=chrome-os-partner:33754
BRANCH=samus
TEST=load on samus and zinger. see that "GFU" is printed on zinger console
to represent that it entered GFU mode. use twinkie to see that samus
sent discover identity, discover svids, discover modes, enter mode, and
then read info. See on samus pd console that we received result of read
info. from samus pd console with zinger attached:
> pe 1 dump
IDENT:
[ID Header] 2c0018d1 :: AMA, VID:18d1
[Cert Stat] 00000000
[2] 50100001 [3] 00000003 [4] 52136b91 [5] 0401137d
SVID[0]: 18d1 MODES: [1] 00000000
MODE[1]: svid:18d1 caps:00000000
Also, use a samus with cros_pd_update running in kernel, and see that zinger
auto-updates when plugged in. Performed 10 updates with no failures.
Change-Id: I8d4d38e4a9f649fe0889f688f262630ef55106ee
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/229622
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Lower the minimum input current limit on samus by 64mA to 448mA
to have the ability to limit input current to something below
500mA.
BUG=none
BRANCH=samus
TEST=load onto samus, and use charger console command to verify
input current limit is 448mA.
Change-Id: I05bcacce707faddd3addee50356d85281466e146
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/229281
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Allow policy layer to request a PR or DR swap upon formation of
a power contract. Zinger always asks for a data swap so it can
be a UFP, and Samus asks for a data swap only if it is a UFP to
become a DFP.
BUG=chrome-os-partner:33754, chrome-os-partner:31195
BRANCH=samus
TEST=load onto samus and zinger and make sure they swap roles
upon connect with no collisions
Change-Id: I275c9669549c26f25c58f80845daad8edab11313
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/229327
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
The pull-up on USB D+ is by default enabled, as needed by DFU mode. In
normal operation, we should disable it unless case-closed debugging is
enabled.
BRANCH=None
BUG=chrome-os-partner:33544
TEST=Build ryu
Change-Id: I18d216d8fff61640e4fbc3ce259209b3f149abf1
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/229797
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Add support for DR_swap, data role swap command.
BUG=chrome-os-partner:33686, chrome-os-partner:28343
BRANCH=samus
TEST=test with samus and zinger. use "pd 1 swap data" command
and verify data role swaps by using twinkie and "pd 1 state".
Change-Id: I410309199cdeecb26847a6bf217523fdfe688cba
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/229192
At 48Mhz, due to the flash accessing requiring 1 Wait-State, we need to
enable the flash prefetch buffer to get the full CPU execution speed.
The bit used to enable flash prefetching was fixed :
crosreview.com/219921 , but the change was overriden by the CL enabling
the STOP mode : crosreview.com/219933
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BRANCH=samus
BUG=chrome-os-partner:28335
TEST=plug Zinger into a PD power sink, with the Twinkie protocol
analyzer observe how long Zinger takes to send back GoodCRC after the
Request and SinkCap messages. With the patch, the average delay is going
from 160us to 50us.
Change-Id: I9de1bc10e14485919046c841eea16de3c3b3c800
Reviewed-on: https://chromium-review.googlesource.com/229671
Tested-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Commit-Queue: Vincent Palatin <vpalatin@chromium.org>
Disable most of the pd console command to save space. The command
can still be used with subcommands "state" and "dump" to get state
information and change debug level.
BUG=none
BRANCH=none
TEST=make buildall with CONFIG_CMD_PD defined and undefined. Also
undefined the config option and loaded onto samus and verified that
the pd 0 state command still works.
Change-Id: Ie41bad53122a1e2a9ef4bad6423b9cdc85f53742
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/229420
Reviewed-by: Vic Yang <victoryang@chromium.org>
Added hibernate wakeup pin(EC_WAKE) that covers both AC_PRESENT and LID_OPEN. It pulses a
rising edge when either of them have a rising edge.
The power button was also inverted to handle hibernation better, now it's low
except when pressed it temporarly goes high.
BRANCH=None
BUG=chrome-os-partner:33269 chrome-os-partner:32782
TEST=make BOARD=jerry
Try hibernating, all wakeup sources should work, it shouldn't stay hibernated.
All signals(AC, lid, power button) should work equally well as in pinky.
Change-Id: I894135bdfd5600919296f7510dc9cd1acd567ddc
Signed-off-by: Chris Zhong <zyw@rock-chips.com>
Signed-off-by: Alexandru M Stan <amstan@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/228763
This enables forwarding of the local PD/EC console
over debug USB. It gates the console functionality
based on the CCD mode that is set.
Signed-off-by: Anton Staaf <robotboy@chromium.org>
BRANCH=None
BUG=None
TEST=make buildall -j
Enable partial CCD mode on ryu and verify that it is
enumerated by the host correctly, but doesn't respond
to console input, and doesn't generate output.
Enable full CCD mode on ryu and verify that it is
enumerated and that the console works as expected.
Verify that the console still works by default on the
discovery-stm32f072 board.
Change-Id: I0325ce9689486c41387d6075330be1d7d42f1d42
Reviewed-on: https://chromium-review.googlesource.com/229342
Reviewed-by: Anton Staaf <robotboy@chromium.org>
Commit-Queue: Anton Staaf <robotboy@chromium.org>
Tested-by: Anton Staaf <robotboy@chromium.org>
This provides a framework for additional work. It
exposes an API (ccd_set_mode) that can be used by the
PD code to enable Case Closed Debug. Enabling CCD will
result in the USB 2.0 lines on Ryu (proto 2) to be
disconnected from the AP and for the USB peripheral to
be enabled and connected to the host. The result is
an enumerated device with no interfaces.
Signed-off-by: Anton Staaf <robotboy@chromium.org>
BRANCH=None
BUG=None
TEST=make buildall -j
Enable CCD ryu_p2 and verify that it is enumerated
by the host correctly. This requires a reworked
Ryu (proto 2 with pullup).
Change-Id: I1fbecdd5f94a61519cfc18c5e087892c6bd77fde
Reviewed-on: https://chromium-review.googlesource.com/229139
Reviewed-by: Anton Staaf <robotboy@chromium.org>
Commit-Queue: Anton Staaf <robotboy@chromium.org>
Tested-by: Anton Staaf <robotboy@chromium.org>
Previously enabling USB would automatically (using an
init hook) initialize the USB peripheral. This would
take over the GPIO lines assigned to the USB module.
This is not OK on Ryu for Case Closed Debug because it
interferes with the AP's access to the USB 2.0 lines
even when not in Case Close Debug mode.
This change adds a configuration option to inhibit this
default initialization of the USB peripheral. It also
renames the existing CONFIG_USB_INHIBIT to
CONFIG_USB_INHIBIT_CONNECT now that there are two
possible inhibitions.
Signed-off-by: Anton Staaf <robotboy@chromium.org>
BRANCH=None
BUG=None
TEST=make buildall -j
Enable console on ryu_p2 and discovery-stm32f072 board
Verify that it works on both
Change-Id: I6734357131b4356e3d4164349d6c74deac196ce5
Reviewed-on: https://chromium-review.googlesource.com/229138
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Commit-Queue: Anton Staaf <robotboy@chromium.org>
Tested-by: Anton Staaf <robotboy@chromium.org>
When a PD charger is detected, gets its max charge capability, but
initially negotiate for its minimum charge mode. If we later determine
that the port will be the one active charge port, re-negotiate for the
max charge capability.
BUG=chrome-os-partner:32003
TEST=Manual on Samus. Plug in Zinger, verify that current limit is
initially set to 500 mA, then switches to 3000 mA shortly after. Plug in
two Zingers, verify that one provides 3000 mA current while the other
negotiates to 500 mA. Verify that the 500 mA charger bumps up to a high
current once becoming active.
BRANCH=Samus
Change-Id: Ifa562b72d763642fc8bd62bc7f5aaa4eda1ef950
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/225922
Reviewed-by: Alec Berg <alecaberg@chromium.org>
