No functional changes; just clean up comments and remove dead code
BUG=chrome-os-partner:15579
BRANCH=none
TEST=code compiles
Change-Id: Id006ae18f2b26cea1720196f696f937811b6ba5b
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/36448
Reviewed-by: Simon Glass <sjg@chromium.org>
It wastes time to erase blocks that are already erased and it is faster
on stm32 to check first. Add a check in flash_physical_erase() on all
chips, using a common flash_is_erased() function.
BUG=none
BRANCH=snow,link
TEST=manual
Do software sync in U-Boot and see that it succeeds. This tests that
we can still erase and then boot a written image. It typically saves
a second on a full sync over i2c.
SMDK5250 # cros_test swsync -f
SF: Detected W25Q32 with page size 4 KiB, total 4 MiB
Flashing RW EC image: erasing, writing, done
Flashing RO EC image: erasing, writing, done
Full software sync completed in 22.949s
SMDK5250 #
Also see that second erase is faster:
SMDK5250 # time mkbp erase rw
time: 0.952 seconds, 952 ticks
SMDK5250 # time mkbp erase rw
time: 0.054 seconds, 54 ticks
SMDK5250 #
Change-Id: I3699577217fdbb2f212d20d150d3ca15fdff03eb
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/30851
Reviewed-by: Randall Spangler <rspangler@chromium.org>
This is a significant rewrite of the flash module, since it turns out
that much less of the flash logic is actually common between stm32 and
lm4.
BUG=chrome-os-partner:11699
TEST=on link,
(enable hardware wp)
flashinfo -> wp_gpio_asserted
flashwp enable
flashinfo -> wp_gpio_asserted ro_at_boot
reboot
flashinfo -> wp_gpio_asserted ro_at_boot ro_now
flashwp disable -> error 7
flashwp now
flashinfo -> wp_gpio_asserted ro_at_boot ro_now rw_now
reboot
flashinfo -> wp_gpio_asserted ro_at_boot ro_now
(disable hardware wp)
reboot
flashinfo -> ro_at_boot
flashwp disable
flashinfo -> (no flags)
Change-Id: If22b02373946ce1c080d49ccded4f8fa3e380115
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/28200
Reviewed-by: Vic Yang <victoryang@chromium.org>
Everything now uses flash_dataptr() to get at flash memory rather than
calling the read function, since the read function adds a needless memcpy().
BUG=chrome-os-partner:11150
TEST=manual
flashwp enable
reboot
flashinfo -> should show ro_at_boot
flashwp disable
reboot
flashinfo -> should no longer show ro_at_boot
Change-Id: I1830e2f036cf6777115c782c1737335ff2eb4ce0
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/27796
Now that read-only code is protected iff the persistent state is
locked, we don't need to track per-block in the persistent state.
BUG=chrome-os-partner:11150
TEST=if it builds and boots, it's fine
Change-Id: I80e6a85c0c72136b7ed8964ce02c8abdbaafe637
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/27719
1. If the flash protection state is locked, RO firmware is explicitly locked.
2. Protecting flash now locks the entire flash.
BUG=chrome-os-partner:11150
TEST=manual
flashinfo -> nothing protected
flashwp now
flashinfo -> unlocked,applied; everything protected
reboot
flashinfo -> nothing protected
flashwp lock ->
flashinfo -> locked,applied; now has 40 Y's at start and 1 at end
reboot
flashinfo -> locked,applied; now has 40 Y's at start and 1 at end
remove WP screw
reboot
flashinfo -> locked, not applied; nothing protected
flashwp unlock
flashinfo -> nothing protected
Change-Id: I2cf0e8bfe82ab7a5bf88b9161b7a05b889cae71a
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/27717
If flash starts at zero, then flash_dataptr() will return NULL for a valid
region. Change the function around so that it can be used in this case.
BUG=chrome-os-partner:10146
TEST=manual:
Modify code it print out parameters and problems, then:
Writing 256 bytes to 0x0...
0 256 64
ok 131072
Command returned error 1
> flashwrite 0 256
Writing 256 bytes to 0x0...
0 256 64
ok 131072
Command returned error 1
> flashwrite 0 255
Writing 255 bytes to 0x0...
0 255 64
Command usage/param invalid.
Usage: flashwrite offset [size]
Change-Id: I5683fc181ef780310ceff50f120735659e973784
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/26749
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-by: Rong Chang <rongchang@chromium.org>
Sometimes it is useful to get access to the flash directly, without using
flash_read(). Add a function to do this.
Since the range checking is done in every function in flash_common,
use the new function to do it for us. That way we get a slight (64 byte)
code size reduction.
BUG=chrome-os-partner:10146
TEST=manual:
build and boot on snow with SPI flash emulation, in U-Boot:
See that the 32KB of flash has been provided correctly.
Change-Id: I6622a24234edaed371dd5b9bf43d1f3974d55e39
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/26174
This uses the last bank of flash to hold persistent settings, and
looks at the write protect GPIO to decide whether to protect the chip
at boot (chrome-os-partner:7453).
For ease of debugging, I've temporarily hacked this so flash uses the
RECOVERYn signal (dut-control goog_rec_mode:on) to enable WP instead
of the write protect signal; this works around chrome-os-partner:8580.
Also note that if you write protect any blocks even temporarily,
you'll need to do a power-on reset to clear them before you can
reprogram the flash. See chrome-os-partner:8632. At the EC console,
"hibernate 1" will do that, or you can just yank the power.
This also fixes a bug in the flash write and erase commands, where
they weren't properly detecting failure if you attempted to modify a
protected block (missed an interrupt reason...)
New "flashwp" console commands work. LPC commands need reworking.
Signed-off-by: Randall Spangler <rspangler@chromium.org>
BUG=chrome-os-partner:8448
TEST=manual
Change-Id: I49c38cc25c793094ae3331a4586fda0761b4bac6
More modules can be disabled individually through CONFIG_ defines.
Reordered early module pre-init and init, and added comments to
explain why things are ordered in main() the way they are.
Fixed a few assorted init-related bugs along the way, like st32m
keyboard scan double-initializing.
BUG=none
TEST=build link, bds, daisy
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Change-Id: I04a7fa51d743adfab4be4bdddaeef68943b96dec
