Modified i2c driver into controllers and ports to support I2C0 port 0/1 at
the same time.
Modified drivers:
1. i2c.c: Support i2c controller mechanism and fixed bug for i2c_raw functions
used by i2c_wedge and i2c_unwedge.
2. gpio.c: Fixed bug for gpio_alt_sel since wrong type of func.
3. lpc.c: Fixed bug for port80. Since disabling SUPPORT_P80_SEG, we should
replace GLUE_SDP0/1 with DP80BUF.
BUG=chrome-os-partner:34346
TEST=make buildall -j; test nuvoton IC specific drivers
BRANCH=none
Change-Id: I9919269e4f5e795d9ceb8a4cd2c39abbd7bb6b1a
Signed-off-by: Ian Chao <mlchao@nuvoton.com>
Reviewed-on: https://chromium-review.googlesource.com/294015
Reviewed-by: Randall Spangler <rspangler@chromium.org>
npcx GPIO code calls out to an LPC function, which isn't defined on
platforms without LPC support.
BUG=chromium:520207
TEST=`make buildall -j`
BRANCH=None
Change-Id: I80c0d08fea4a2621df9646926959fc48af52a15a
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/293013
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Fixed bug during polling port 0x204 by BIOS.
We should set processing flag before reading command byte in ISR to prevent
EC_LPC_STATUS_FROM_HOST and EC_LPC_STATUS_PROCESSING bits are both low.
Modified drivers:
1. gpio.c: Add LRESET ISR.
2. lpc.c: Fixed bug during polling port 0x204 by BIOS.
3. flash_ec: Reset ec before flashing ec
BUG=chrome-os-partner:34346
TEST=make buildall -j; test nuvoton IC specific drivers
BRANCH=none
Change-Id: I8e557f2e2be41a7a9d40c03c775313b12668f283
Signed-off-by: Ian Chao <mlchao@nuvoton.com>
Reviewed-on: https://chromium-review.googlesource.com/291210
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Commit-Queue: Randall Spangler <rspangler@chromium.org>
Tested-by: Randall Spangler <rspangler@chromium.org>
system_get_chip_revision() would return a string which lacked the
terminating null. Increase the string length and enforce termination.
BUG=chromium:511405
BRANCH=none
TEST=version; should show chip revision without garbage chars at end
Change-Id: Icb9e36c5bfdf7de7400e5316934ccf28b4b57898
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/290392
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
Reviewed-by: Mulin Chao <mlchao@nuvoton.com>
Tested-by: Mulin Chao <mlchao@nuvoton.com>
Now that HOOK_INIT hooks are called from a task switching context, most
calls to task_start_called() should no longer be needed. This commit
removes them.
BRANCH=None
BUG=chrome-os-partner:27226
TEST=make -j buildall tests
TEST=Flash EC image onto samus and verify EC boot, AP boot, keyboard,
lid, and tap-for-battery all functional.
TEST=Flash EC image onto samus_pd and verify charging still works.
TEST=Flash EC image onto ryu(P3) and verify that EC boot.
TEST=Added ASSERT(task_start_called()) to the places where I removed
task_start_called(). Booted samus, samus_pd, cyan, and ryu with AC
inserted and verified that no ASSERT's were hit upon boot.
Change-Id: Ic12c61862e85ca3a0a295beedbb4eeee6d5e515b
Signed-off-by: Aseda Aboagye <aaboagye@google.com>
Reviewed-on: https://chromium-review.googlesource.com/285635
Tested-by: Aseda Aboagye <aaboagye@chromium.org>
Reviewed-by: Shawn N <shawnn@chromium.org>
Commit-Queue: Aseda Aboagye <aaboagye@chromium.org>
Trybot-Ready: Aseda Aboagye <aaboagye@chromium.org>
Allow more than one SPI master.
Add CONFIG variables to address the system SPI flash.
To have SPI master ports, spi_ports array must be defined.
BRANCH=smaug
TEST=compile
BUG=chrome-os-partner:42304
Change-Id: Id43869f648965c1582b7be1c7fb3a38f175fda95
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/288512
Commit-Queue: David James <davidjames@chromium.org>
Add ECST tool to modify the header used by npcx booter.
Modified drivers:
1. i2c.c: Modify for i2c_port design.
2. i2c.c: Fixed bugs when mutil-tasks use the same i2c port and pull-up issue.
3. hwtimer.c: Fixed bug whcih event expired time is behide current timer.
4. lpc.c: Add intializing host settings after pltrst is deasserted.
5. uart.c/clock.c/register.h: Fixed bug which cannot enter deep-idle
when gpio is any-edge trigger mode.
6. task.c: Add workaround method for hard fault issue.
7. keyboard_raw.c: Modified for support CONFIG_KEYBOARD_KSO_BASE
8. lpc.c: Modified for support CONFIG_KEYBOARD_IRQ_GPIO
9. lpc.c: fixed obe interrupt bug during 8042 initialization
10.Adjust path of flat files for new Makefile rules
11.Fixed build error on lpc.c without CONFIG_KEYBOARD_IRQ_GPIO
BUG=chrome-os-partner:34346
TEST=make buildall -j; test nuvoton IC specific drivers
BRANCH=none
Change-Id: Icf9494174b245b4026e396be877d578f36b6f6a5
Signed-off-by: Ian Chao <mlchao@nuvoton.com>
Reviewed-on: https://chromium-review.googlesource.com/284036
Reviewed-by: Shawn N <shawnn@chromium.org>
Tested-by: Shawn N <shawnn@chromium.org>
Commit-Queue: Shawn N <shawnn@chromium.org>
Avoid duplicating servo configurations for every chip.
BRANCH=none
BUG=chrome-os-partner:22990
TEST=None. This is an intermediate step to make it clear what's happening.
CQ-DEPEND=CL:273950
Change-Id: I448543b6ab9d39423955e8d2589b6035c59e838a
Signed-off-by: Myles Watson <mylesgw@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/273906
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Add npcx_evb_arm board-level driver for arm-based platform.
Add header.c: for booting from NPCX5M5G A3 Booter.
Remove lfw folder due to those functionalitie have been replaced with Booter
Modified drivers for
Patch Set 1:
1. flash.c: Implement UMA lock, tri-state and selection register lock functionalities
2. hwtimer.c: Add ITIM32 for hwtimer
3. lpc.c: Add checking for LRESET
4. system.c: Modified CODERAM_ARCH functions for NPCX5M5G A3 Booter.
5. uart.c: Add support for module 2
Patch Set 2:
6. lpc.c: Modified lpc_get_pltrst_asserted() func
Patch Set 3:
7. minimize the changes for CONFIG_CODERAM_ARCH in common layer
8. comments of Patch Set1/2
Patch Set 4:
9. Modified CONFIG_RO_MEM_OFF point to ro image and keep header as a part of ec.RO.flat.
10. Fixed RO_FRID and RW_FRID issues which caused by CONFIG_CODERAM_ARCH.
Patch Set 5:
11. Modified system.c in common folder for supporting *_STORAGE_OFF.
12. Use *_STORAGE_OFF in firmware_image.lds.S to indicate flat file layout in flash.
Patch Set 6:
13. rebase to newest version
14. system.c: Modified for the newest include/system.h
Patch Set 7:
15. Merge from version 0625
BUG=chrome-os-partner:34346
TEST=make buildall -j; test nuvoton IC specific drivers
BRANCH=none
Change-Id: Ifd7c10b81b5781ccd75bb2558dc236486976e8ed
Signed-off-by: Ian Chao <mlchao@nuvoton.com>
Reviewed-on: https://chromium-review.googlesource.com/272034
Reviewed-by: Shawn N <shawnn@chromium.org>
Tested-by: Shawn N <shawnn@chromium.org>
Commit-Queue: Shawn N <shawnn@chromium.org>
mutex_lock() is called from MEC1322_IRQ_ACPIEC0_IBF
interrupt context, causing deadlock and assertion
in __wait_evt().
In the interrupt context it now checks for mutex lock first.
If the mutex is already locked,, it will disable ACPI
interrupts and defer the memmap mutex lock.
Added LPC interrupt disable/enable functions as needed.
Increased deferred function count where needed.
BRANCH=None
BUG=chrome-os-partner:40820
TEST=Test for suspend-resume, cold, warm reboots and
other general stability.
Change-Id: I3dda0d4635a6b6281faf200c8c7b6fcba8877254
Signed-off-by: Chiranjeevi Rapolu <chiranjeevi.rapolu@intel.com>
Reviewed-on: https://chromium-review.googlesource.com/280418
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Reviewed-by: Shawn N <shawnn@chromium.org>
Commit-Queue: Divya Jyothi <divya.jyothi@intel.com>
Tested-by: Divya Jyothi <divya.jyothi@intel.com>
This unifies all the EC header files to use __CROS_EC_FILENAME_H
as the include guard. Well, except for test/ util/ and extra/
which use __TEST_ __UTIL_ and __EXTRA_ prefixes respectively.
BUG=chromium:496895
BRANCH=none
TEST=make buildall -j
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Change-Id: Iea71b3a08bdec94a11239de810a2b2e152b15029
Reviewed-on: https://chromium-review.googlesource.com/278121
Reviewed-by: Randall Spangler <rspangler@chromium.org>
changes added to support flashrom are:
sysjump support to be able to copy the RO/RW image
and jump to it without causing AP to reboot while
its alreday ON.
LPC init should be reinitialized on sysjump
corrected gpio_set_flags_by_mask to make sure we
update the register only for GPIO_LOW condition and not
all else conditions.
BUG=chrome-os-partner:38103
TEST=commands : flashrom -p ec -w ec.bin
flashrom -p ec -r ec.bin
BRANCH=none
Change-Id: I23892f0378d756052030e73034c3acdd41477e34
Signed-off-by: Divya Jyothi <divya.jyothi@intel.com>
Signed-off-by: Shamile Khan <shamile.khan@intel.com>
Reviewed-on: https://chromium-review.googlesource.com/272000
Reviewed-by: Shawn N <shawnn@chromium.org>
i2c_xfer was previously implemented at the chip-level, but now we want
to add some global retry logic. Rename the chip-level i2c_xfer functions
to chip_i2c_xfer and add a new global wrapper function i2c_xfer.
BUG=chrome-os-partner:39613
TEST=Run "battery" from EC console on Cyan, verify that values + strings
are correctly printed.
BRANCH=None
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Change-Id: If37c85cc3cf94fd53feb6931553e10c30ad6cad6
Reviewed-on: https://chromium-review.googlesource.com/272939
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Our existing GPIO macros use port# / gpio#, but the concept of different
GPIO ports does not exist on the mec1322. Therefore, add new GPIO macros
for chips which do not have distinct GPIO ports.
BUG=None
BRANCH=None
TEST=make buildall -j
Change-Id: Ibda97c6563ad447d16dab39ecadab43ccb25174b
Signed-off-by: Steven Jian <steven.jian@intel.com>
Reviewed-on: https://chromium-review.googlesource.com/262841
Reviewed-by: Anton Staaf <robotboy@chromium.org>
Since stm32 and mec1322 now support open-ended i2c_xfer, we can move the
lm4 i2c_read_string implementation to common code and delete all
chip-specific versions.
BUG=chrome-os-partner:39613
TEST=Run "battery" from EC console on Cyan and Oak, verify that battery
info + strings are correctly printed.
BRANCH=None
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Change-Id: I06369df64bb2eb747d163664b4c96eeacb4b1faa
Reviewed-on: https://chromium-review.googlesource.com/272938
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Add CONFIG_LTO to use GCC Link-Time Optimizations to try to reduce the
flash footprint of the firmware.
Add additional protection to some functions/data to avoid removal by the
linker when their usage is not obvious.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BRANCH=none
BUG=none
TEST=make buildall (with and without LTO enable on all boards)
Change-Id: I586b8c1eda4592b416c85383b65153c1d5ab0059
Reviewed-on: https://chromium-review.googlesource.com/271291
Trybot-Ready: Vincent Palatin <vpalatin@chromium.org>
Tested-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Commit-Queue: Vincent Palatin <vpalatin@chromium.org>
- Use CONFIG_*_MEM when dealing with images in program memory.
- Use CONFIG_*_STORAGE when dealing with images on storage.
- Use CONFIG_WP when dealing with the entire WP RO region.
BUG=chrome-os-partner:39741,chrome-os-partner:23796
TEST=Manual on Cyan with subsequent commit. Verify that FMAP matches
actual layout of image. Verify flashrom succeeds flashing + verifying EC
image using host command interface.
BRANCH=None
Change-Id: Iadc02daa89fe3bf07b083ed0f7be2e60702a1867
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/270269
Rename image geometry configs with a uniform naming scheme to make their
purposes more clear.
CONFIG_RO_MEM_OFF (was CONFIG_FW_RO_OFF) - RO image offset in program memory
CONFIG_RO_STORAGE_OFF (was CONFIG_RO_SPI_OFF) - RO image offset on storage
CONFIG_RO_SIZE (was CONFIG_FW_RO_SIZE) - Size of RO image
CONFIG_RW_MEM_OFF (was CONFIG_FW_RW_OFF) - RW image offset in program memory
CONFIG_RW_STORAGE_OFF (was CONFIG_RW_SPI_OFF) - RW image offset on storage
CONFIG_RW_SIZE (was CONFIG_FW_RW_SIZE) - Size of RW image
CONFIG_WP_OFF (was CONFIG_FW_WP_RO_OFF) - Offset of WP region on storage
CONFIG_WP_SIZE (was CONFIG_FW_WP_RO_SIZE) - Size of WP region on storage
BUG=chrome-os-partner:39741,chrome-os-partner:23796
TEST=Set date / version strings to constants then `make buildall -j`.
Verify that each ec.bin image is identical pre- and post-change.
BRANCH=None
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Change-Id: I6ea0a4e456dae71c266fa917a309b9f6fa4b50cd
Reviewed-on: https://chromium-review.googlesource.com/270189
Reviewed-by: Anton Staaf <robotboy@chromium.org>
In the gpio_info struct, we had a irq_handler pointer defined even
though a majority of the GPIOs did not have irq handlers associated. By
removing the irq_handler pointer out of the struct, we can save some
space with some targets saving more than others. (For example, ~260
bytes for samus_pd).
This change also brings about a new define:
GPIO_INT(name, port, pin, flags, signal)
And the existing GPIO macro has had the signal parameter removed since
they were just NULL.
GPIO(name, port, pin, flags)
In each of the gpio.inc files, all the GPIOs with irq handlers must be
defined at the top of the file. This is because their enum values from
gpio_signal are used as the index to the gpio_irq_handlers table.
BUG=chromium:471331
BRANCH=none
TEST=Flashed ec to samus and samus_pd, verified lightbar tap, lid, power
button, keyboard, charging, all still working.
TEST=Moved a GPIO_INT declaration after a GPIO declaration and watched the build
fail.
TEST=make -j BOARD=peppy tests
TEST=make -j BOARD=auron tests
TEST=make -j BOARD=link tests
Change-Id: Id6e261b0a3cd63223ca92f2e96a80c95e85cdefb
Signed-off-by: Aseda Aboagye <aaboagye@google.com>
Reviewed-on: https://chromium-review.googlesource.com/263973
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Tested-by: Aseda Aboagye <aaboagye@chromium.org>
Commit-Queue: Aseda Aboagye <aaboagye@chromium.org>
Trybot-Ready: Aseda Aboagye <aaboagye@chromium.org>
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Some platforms are unable to access the 900h-9ffh region over LPC and
must instead access memmap data through the ACPI CMD / DATA ports. To
avoid racing with data updates, disallow changes to multi-byte memmap
data while in burst mode.
Linux currently enables burst mode when accessing multi-byte data and
disables it immediately afterward, though the ACPI spec defines burst mode
in a more general way.
BUG=chrome-os-partner:38224
TEST=Manual on Samus. Undefine LPC_MEMMAP and modify asl to move memmap
data to ERAM at offset 0x20. Verify system boots cleanly and battery
status is updated immediately on plug / unplug.
BRANCH=None
Change-Id: Ib848bdb491fdfece96ad0cee7a44ba85b4a1a50b
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/262072
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
The npcx chip and evb use a SPI flash chip to hold the EC image. They
don't need pstate, and should use the SPI flash status register
directly.
1. Remove CONFIG_FLASH_PSTATE from npcx_evb.
2. Remap WP_L GPIO to GPIO 93 (this should be the same as the write protect
line to the SPI flash chip).
3. Change the npcx flash driver so that it directly reads/writes the SPI
status register instead of mucking with pstate.
BUG=chrome-os-partner:34346
BRANCH=none
TEST=manual
Add a switch or jumper to the EVB so R1 can be closed.
Toggle the switch and see that WP_L state changes. Leave enabled.
flashinfo -> nothing is protected, WP_L is enabled (=0)
(also do this after each flashwp command to check the protection status)
flashwp enable -> RO is protected now and at boot.
reboot
flashwp enable -> RO is still protected.
flashwp disable -> RO is still protected. (because WP switch is enabled).
Toggle the switch so WP_L is disabled (=1)
flashwp disable -> Succeeds, flash is not protected
Change-Id: Ifa959bce69f8eb4724057ecaa6a6c5075783c19d
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/253633
Reviewed-by: Shawn N <shawnn@chromium.org>
Issues fixed on 0216:
1.Modified CONFIG_KEYBOARD_COL2_INVERTED support in keyboard_raw.c
2.Modified warm_reset checking in gpio.c
3.Modified system_get_chip_name in system.c for package info.
4.Modified fan.c and pwm.c for:
● If the DCRn value is greater than the CTRn value, the PWM_n signal is always low.
● Fan stall condition event:
If the measured fan speed is lower than the lowLimit value (unless the Fan Speed Low Limit value is 0) or in case of erroneous measurement, the userCallback is called.
5. Change cycle_pluses to 480 in board.c
Issues fixed:
1. Jump data at top of RAM is getting corrupted. Changed the flag to
RESET_FLAG_RESET_PIN. Added a workaround method to fix VCC1_RST
issue.
2. Hibernate wake need to report whether wake reason was GPIO or RTC
3. Hibernate wake must be distinguishable from watchdog reset. The
booter will log reset reason in Code RAM. I copy the log data to
battery-backup RAM in little FW. And system driver will refer this
data to distinguish if it's watchdog reset or not.
4. Watchdog reset flag is not set. Same fix as 3.
5. Should return error if unable to clear SPI flash status register.
6. Remove chip_temp_sensor.c
7. Remove use of pstate from flash driver
8. Remove support for watchdog warm reset
9. Keyboard raw driver must support COL2 inverted
10. LPC memory mapped data must be read-only from host
11. LPC should support PLTRST# signal
12. Problems reading chip type/version. Use core registers and ROM data to read IDs.
13. When chip type/version is unknown, report hex value.
14. Watchdog does not consistently print panic information.
15. Remove console force enable logic.
16. Enable only the peripheral clocks that are needed. Please notice
user should add bit mask in CGC_XXX_MASK if they want to enable
additional module. For example, if user wants to enable PWM3, he must
add PWDWN_CTL2_PWM3_PD bit in CGC_PWM_MASK.
Please see HOOK_FREQ_CHANGE and HOOK_INIT these two hook functions.
If I turn off all I2C modules in system_pre_init and turn on the
modules I need in i2c_init, I found its freq is not correct. The root
cause is hook_notify(HOOK_FREQ_CHANGE) is executed first (in
clock_init) before i2c_init. At this time, i2c modules are power-down
and writing to freq register is useless. I re-execute freq-changed
hook function after turning on modules again.
17. MPU properly configured to prevent code execution from data RAM
18. Partial nvcontext implementation. Copy these 16 bytes in our battery-backup RAM.
Additional items we also modified:
1. pwm.c: Support open-drain IO type of PWM. (PWM IO-Type cannot by
determined by GPIO, we use bit 1 & 2 of function byte of gpio_alt_func
array to support it)
2. ec_npcxflash.c: Use definition to replace constant value. Stop
watchdog during flash programing.
3. npcx_cmds.tcl: Adjust script sequence for robustness. Add unlock
MPU commands for Data RAM.
BUG=chrome-os-partner:34346
BRANCH=none
TEST=manually verify changes
Change-Id: I722a77d29e7543b054819480c7b7477af4263119
Signed-off-by: Ian Chao <mlchao@nuvoton.com>
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/248670
Chipset sometimes needs I2C, therefore i2c_init should have a higher priority
than power_common_init so i2c is available by the time the chipset might be
talking to the battery.
BUG=chrome-os-partner:35502, chrome-os-partner:35173
TEST=There is no "battery not responding" message at startup on veyron
TEST=EC boot takes less than 1 second on veyron
BRANCH=none
Change-Id: Ib10b653decc7703e706d4dd1976abf0fdbc25ac2
Signed-off-by: Alexandru M Stan <amstan@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/241102
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Add npcx_evb in board folder for testing
Add shared-spi arch support in common layer.
Modified drivers for
1. Fan.c: console command “pwmduty”.
2. Pwm.c: for the issue when set duty to 0.
3. System.c: for hw reset only during system reset.
4. Flash.c: Fixed access denied bug of the flash driver for host command.
5. Comments from Patch Set 1
6. Comments from Patch Set 3 (except sha256.c)
7. Add openocd and flash_ec support for npcx_evb
8. Add little FW and spi-flash upload FW in chip folder
9. Add optional make rules for PROJECT_EXTRA
10.Replace CONFIG_SHRSPI_ARCH with CONFIG_CODERAM_ARCH and remove changes
in common layer sources for shared-spi arch. (except sysjump)
11.Find the root cause of JTAG issue and use workaround method
with SUPPORT_JTAG in clock.c
12 Execute hibernate in low power RAM for better power consumption
13 Add workaround method for version console command
14 Modified coding style issues by checkpatch.pl tool
BUG=chrome-os-partner:34346
TEST=make buildall -j; test nuvoton IC specific drivers
BRANCH=none
Change-Id: I5e383420642de1643e2bead837a55c8c58481786
Signed-off-by: Ian Chao <mlchao@nuvoton.com>
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/233742
