This commit introduces the build infrastructure changes needed for
creating a shared RO library. (libsharedobjs). The end goal is for the
library to contain various objects that can be shared with both the RO
and RW EC images.
Now, there are 3 make goals: ro, rw, and libsharedobjs.
In order for changes that are only specific to a single image (ie: RW
only) to be applied correctly, the object files are now built separately
for the RO, RW, shared objects library targets.
NOTE: Certain EC targets are incompatible with this model due to the
fact that only one image is present within flash at a time.
BRANCH=none
BUG=None
TEST=make -j buildall tests
TEST=make -j BOARD=cr50 xrefs
TEST=make BOARD=samus dis
TEST=Built samus EC image and compared that the final EC image was
identical to the upstream version (except for the git SHAs & version
strings).
CQ-DEPEND=CL:285934
Change-Id: I8e67f089710be9c6d7017718109262394bdad2f5
Signed-off-by: Aseda Aboagye <aaboagye@google.com>
Reviewed-on: https://chromium-review.googlesource.com/274079
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
Tested-by: Aseda Aboagye <aaboagye@chromium.org>
Commit-Queue: Aseda Aboagye <aaboagye@chromium.org>
Our USB buffers are just arrays of uint8_t in program RAM, so
let's treat them that way. The DMA descriptors are in normal RAM,
too.
BUG=chrome-os-partner:40693
BRANCH=none
TEST=make buildall
Change-Id: Ibafe1a557a328bbf8cf37ce113675fcd35bad376
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/273918
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Rename image geometry configs with a uniform naming scheme to make their
purposes more clear.
CONFIG_RO_MEM_OFF (was CONFIG_FW_RO_OFF) - RO image offset in program memory
CONFIG_RO_STORAGE_OFF (was CONFIG_RO_SPI_OFF) - RO image offset on storage
CONFIG_RO_SIZE (was CONFIG_FW_RO_SIZE) - Size of RO image
CONFIG_RW_MEM_OFF (was CONFIG_FW_RW_OFF) - RW image offset in program memory
CONFIG_RW_STORAGE_OFF (was CONFIG_RW_SPI_OFF) - RW image offset on storage
CONFIG_RW_SIZE (was CONFIG_FW_RW_SIZE) - Size of RW image
CONFIG_WP_OFF (was CONFIG_FW_WP_RO_OFF) - Offset of WP region on storage
CONFIG_WP_SIZE (was CONFIG_FW_WP_RO_SIZE) - Size of WP region on storage
BUG=chrome-os-partner:39741,chrome-os-partner:23796
TEST=Set date / version strings to constants then `make buildall -j`.
Verify that each ec.bin image is identical pre- and post-change.
BRANCH=None
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Change-Id: I6ea0a4e456dae71c266fa917a309b9f6fa4b50cd
Reviewed-on: https://chromium-review.googlesource.com/270189
Reviewed-by: Anton Staaf <robotboy@chromium.org>
Currently, ECs with internal flash store the write protect state for
RO in a separate write/erase block of flash. This is wasteful on
chips where there are not many blocks of flash.
Add a new CONFIG_FLASH_PSTATE_IN_BANK option which is defined by
default. This is the old behavior, for compatibility. (And we're
calling it 'bank' because that's what the existing code does, even if
the terminology is somewhat etymologically... bankrupt.)
If that config is #undef'd, then store the write protect flag directly
inside the RO image. This uses only 4 bytes of the RO image, instead
of an entire erase block. The magic numbers for the pstate values are
chosen such that when protecting RO, bits are only transitioned away
from their erased state. Unprotecting RO once it's protected requires
reflashing RO; it's no longer possible to 'flashwp disable'. But
that's ok, because realistically, the only reason to unprotect RO is
if you're about to flash the RO firmware anyway.
BUG=chromium:476659
BRANCH=none
TEST=Without undefining CONFIG_FLASH_PSTATE_IN_BANK, make sure everything
still works on samus and samus_pd. This ensures we didn't break the
existing functionality:
flashinfo -> no flags
flashwp enable
flashinfo -> ro_at_boot
reboot
flashinfo -> ro_at_boot
flashwp disable
flashinfo -> no flags
Then recompile with #undef CONFIG_FLASH_PSTATE_IN_BANK and test:
flashinfo -> no flags
flashwp enable
flashinfo -> ro_at_boot
reboot
flashinfo -> ro_at_boot
flashwp disable -> fails with access denied
flashinfo -> ro_at_boot
Then reflash to verify that clears the ro_at_boot flag:
flashinfo -> no flags
Change-Id: Ie794b8cfed2a10c50b0e36dcf185884070b04666
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/266095
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Trybot-Ready: Vincent Palatin <vpalatin@chromium.org>
Add hook for battery state of charge change. Hook will be used
to cleanup the samus charging workarounds to follow.
BUG=none
BRANCH=samus
TEST=make -j buildall
Change-Id: I99cbb8264783802139cac689804b056623063695
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/245252
Reviewed-by: Shawn N <shawnn@chromium.org>
Allow to use larger RSA keys by setting CONFIG_RSA_KEY_SIZE to 4096 or
8192 rather than using the default 2048-bit size.
It's mainly for benchmarking purpose right now as we don't have the RAM
to store the 3x key size buffer and the flash space for the public key
structure.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BRANCH=samus
BUG=none
TEST=build Zinger with CONFIG_RSA_KEY_SIZE equals to 4096 and run it.
Change-Id: I9839121bf158d0a30dde1e48d875f345191bfec2
Reviewed-on: https://chromium-review.googlesource.com/228925
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Commit-Queue: Vincent Palatin <vpalatin@chromium.org>
Tested-by: Vincent Palatin <vpalatin@chromium.org>
Previously the USB RAM size was off by a factor of two
for chips that required 32-bit alignment of accesses,
even though the underlying memory was 16-bits in size.
This change adds an additional configuration for the
access size (it still assumes that the underlying memory
is 16-bits in size) and uses that to adjust the USB_RAM
memory section in the linker scripts.
This change also removes the default values for the USB
RAM from stm32/config_chip.h because they mask issues
when new chips are added. It is better for a new chip
to fail to compile until these values are provided.
Finally, this change introduces a common USB API header
so that common code doesn't need to include the STM32
specific header.
Signed-off-by: Anton Staaf <robotboy@chromium.org>
BRANCH=None
BUG=None
TEST=make buildall -j
Enable console on ryu_p2 and discovery-stm32f072 board
Verify that it works on both
Change-Id: Id118627f53e9e8ff1bd09fb51f1f9634ff495d19
Reviewed-on: https://chromium-review.googlesource.com/228833
Tested-by: Anton Staaf <robotboy@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Commit-Queue: Anton Staaf <robotboy@chromium.org>
This implements a new API for EC modules to define MKBP event sources
and send MKBP event to the AP. Also, a new host command
EC_CMD_GET_NEXT_EVENT is added for the AP to query the pending MKBP
events. Each event type may have custom event data sent along with the
event.
BRANCH=None
BUG=chrome-os-partner:33194
TEST=Enable MKBP event on Ryu. Set a host event from EC console, run
'ectool nextevent', and see MKBP event 0x01 (HOST_EVENT) and the set
host event.
Signed-off-by: Vic Yang <victoryang@chromium.org>
Change-Id: I28a1b7e826bcc102bbe39016c9bb3e37d125664c
Reviewed-on: https://chromium-review.googlesource.com/224905
Reviewed-by: Randall Spangler <rspangler@chromium.org>
The Zinger RW is now signed with 2048-bit RSA key (using SHA-256 as
digest).
This CL implements the verification mechanism.
note: the RSA key used for signing must be provided as a .pem file.
The path to .pem file must be provided in the PEM environment variable.
By default, it's using the dev key stored in zinger_dev_key.pem.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BRANCH=samus
BUG=chrome-os-partner:28336
TEST=on Zinger, run with properly signed RW firmware and corrupted
firmware and check the serial traces.
Change-Id: Ia58482458904a3ed72d6b0e95996cae86a0ead83
Reviewed-on: https://chromium-review.googlesource.com/220178
Commit-Queue: Vincent Palatin <vpalatin@chromium.org>
Tested-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Currently, on stm32f cortex-m0 systems, interrupts are always being
directed to the RO vector table. This can cause strange problems when
running RW software because it is still calling IRQ handlers in the RO
code.
Unfortunately, on cortex-m0 the ability to specify the vector table
location in flash (VTOR register) is optional, and stm32f0 parts do not
have it. Instead, in order to run RW IRQ handlers, at init time, this
CL copies the vector table from flash to the base address of SRAM
(0x20000000), and then selects SRAM to be mapped to 0x00000000 where
the core looks to find the vector table.
BUG=none
BRANCH=none
TEST=Tested on zinger.
- Verified that vector table is copied to SRAM by printing out 48 words
from SRAM base address 0x20000000 in main() and verifying that it matches
the vector table in flash in the disassembly.
- Verified the vector table at SRAM 0x20000000 points to the RW handlers
when in RW and the RO handlers when in RO.
- Also printed out PC in one IRQ handler and verified it was in the
appropriate section of code.
Also, ran on samus_pd and did a sysjump RW to make sure at least one other
system works.
Change-Id: I22aff1b5e0de9b23fd3324f0cbe4f6c45a81967e
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/210063
Reviewed-by: Vic Yang <victoryang@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Enough USB support to be able to enumerate the device and use bulk or
interrupt endpoints.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BRANCH=none
BUG=chrome-os-partner:28295
TEST=with the following USB console CL, connect a Fruitpie through USB
and use its console over USB.
Change-Id: I37b7f3b6a754cb82ab5f940ea20122d2e16b3b5b
Reviewed-on: https://chromium-review.googlesource.com/193983
Tested-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Todd Broch <tbroch@chromium.org>
Commit-Queue: Vincent Palatin <vpalatin@chromium.org>
Put each functions in a separate section by using -ffunction-sections,
then discard the non-referenced ones in the linker with -gc-sections.
Force keeping a few special symbols by using the KEEP() linker
directive.
This modification is not saving a lot of spaces per se, but will enable
larger code pruning with future optional features.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BRANCH=none
BUG=none
TEST=make buildall, manually check discarded symbols in the .map file
and run on Spring and Link.
The size delta is the following:
Link: total 85.7k -> 84.9k (.text 60.3k -> 59.5k)
Spring: total 59.2k -> 57.2k (.text 44.4k -> 42.5k)
Change-Id: Ib6eb0d3f2cc4fc172c9fc26acac2e486921690a3
Reviewed-on: https://chromium-review.googlesource.com/189224
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Commit-Queue: Vincent Palatin <vpalatin@chromium.org>
Tested-by: Vincent Palatin <vpalatin@chromium.org>
