Replace the stubs by an actual implementation for ADC and Analog
watchdog support on STM32F0xx chips.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BRANCH=none
BUG=none
TEST=manually read ADC values on STM32F072B discovery.
TEST=read all ADC values at once.
TEST=Enable watchdog and check it fires when the voltage goes out of
range.
TEST=read ADC value(s) while watchdog is enabled.
TEST=Disable watchdog and check it's actually disabled.
Change-Id: Ie6fbd1aa95a3d76394fa47803e8cfc24bf5e4562
Reviewed-on: https://chromium-review.googlesource.com/190710
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Tested-by: Vic Yang <victoryang@chromium.org>
Commit-Queue: Vincent Palatin <vpalatin@chromium.org>
LM4 doesn't have implementation of adc_read_all_channels(). Let's use
adc_read_channel() in this case.
BUG=chrome-os-partner:18598
TEST=Build stress test for link. See no error about
adc_read_all_channels() undefined.
BRANCH=None
Change-Id: I5b13384468667cbd17b83faab9f9d3fdc48de91d
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/49589
Reviewed-by: Randall Spangler <rspangler@chromium.org>
This makes it possible to have ADC module monitor an input voltage and
trigger interrupt when it goes out of accepted range.
BUG=chrome-os-partner:18171
TEST=Manual
BRANCH=spring
Change-Id: Ia0c981fadd9bcaa40afe30ca2624c2f3644b95fe
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/45277
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
ADC config structs are now chip-specific; this saves code size
(several hundred bytes on LM4, since no need for 24-entry ADC channel
to GPIO mapping table).
BUG=chrome-os-partner:15579
BRANCH=none
TEST='adc' with system on and off; ChargerCurrent should be bigger when on.
Change-Id: Ia88b3f043438bec049f2d2ad39fc42dcf86d9424
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/36798
This adds basic ADC support for multiple channel conversion.
BUG=chrome-os-partner:14316
BRANCH=none
TEST=1. Boot on snow.
2. Use keyboard signal as input. Check read value changes as input
signal changes.
Change-Id: I3c15c37446fa9273d098f6d581573c11ced45b5e
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/33883
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
This covers modules which need to initialize before task_start(), but
don't particularly care in what order they're initialized.
Signed-off-by: Randall Spangler <rspangler@chromium.org>
BUG=none
TEST=if it boots, it works
Change-Id: I69829aac8d1c3c14ee04916a794b84bbf03a09eb
Board-specific features like lightbar should be config'd at the board
level, not at the chip level.
BUG=none
TEST=build link, bds, daisy
Change-Id: If1df2ca0422f7b8bdc172d0df7bd9f6a1af6a9d2
Signed-off-by: Randall Spangler <rspangler@chromium.org>
This is a trivial patch to fix compilation for boards that are not
based on LM4 (e.g. Discovery).
Signed-off-by: David Hendricks <dhendrix@chromium.org>
TEST=Compiled for Discovery
BUG=None
Change-Id: Ia1f29c61ff4a1f65fe65c43a8e58def7d1217ab2
The ADC input pin was always configured as BDS. Modified it to configure
the correct pin.
BUG=none
TEST=On Link, "rw 0x4002451C" show 0xff instead of 0xf7.
Change-Id: I1efd5cd59ad65f55cd673529afa6153add63ecac
Refactor ADC code and move board/chip-specific part to corresponding
directories.
Implement function and console command to read Link charger current.
BUG=chrome-os-partner:7527
TEST=Read EC temperature and POT input on BDS.
Change-Id: I7fafd310ea49d9b2781f10c3453f5488da29a08a
