The same code exists in four (soon to be five!) different power
sequencing drivers, so move it up to common.
BUG=None
TEST=Manual on Samus. Run "pause_in_s5 on" on EC console, verify that
system stops in S5 on shutdown. Run "pause_in_s5 off" on EC console,
verify that system again goes to G3 on shutdown.
BRANCH=None
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Change-Id: Iaf05ef7ce017be4f9d173e83e985a7a879ba278c
Reviewed-on: https://chromium-review.googlesource.com/269566
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Our code base contains a lot of debug messages in this pattern:
CPRINTF("[%T xxx]\n") or ccprintf("[%T xxx]\n")
The strings are taking up spaces in the EC binaries, so let's refactor
this by adding cprints() and ccprints().
cprints() is just like cprintf(), except that it adds the brackets
and the timestamp. ccprints() is equivalent to cprints(CC_CONSOLE, ...)
This saves us hundreds of bytes in EC binaries.
BUG=chromium:374575
TEST=Build and check flash size
BRANCH=None
Change-Id: Ifafe8dc1b80e698b28ed42b70518c7917b49ee51
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/200490
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Previously, the AP could only set the current wireless power state.
It couldn't determine what the EC would do in S3, nor could it get the
current wireless power state. Extend the wireless command to do so,
and add an EC console command to aid in debugging.
BUG=chrome-os-partner:25655
BRANCH=rambi
TEST=manual; expected numbers are from EC 'wireless' command
AP off -> 0x0, 0x9
AP on -> 0xd 0x9
AP suspended -> 0x9 0x9
AP on -> 0xd 0x9
ectool wireless 0x1 -> 0x1 0x9
ectool wireless 0xd -> 0xd 0x9
ectool wireless 0 0 0 0 -> 0xd 0x9 (and prints 0xd 0x9 to root shell)
ectool wireless 5 -1 -1 0 -> 0x5 0x9
AP suspended -> 0x1 0x9 (doesn't turn on 0x8, just turns off 0x4)
AP on -> 0xd 0x9
ectool wireless 0 0 0 -1 -> 0xd 0x0
AP suspended -> 0x0 0x0
AP on -> 0xd 0x9
Change-Id: I8ead2d4a4423b51ec4f638bf94c62de98726b25c
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/187273
We noticed this on a baytrail board, but the same problem exists in
haswell as well. And while looking there, found that we skipped the
S5G3 state if the 5V rail failed to come up.
Fortunately, these are all rare corner cases; rails will always come
up on a good system. So this only affects systems during bringup and
factory, not devices in the field.
BUG=chrome-os-partner:24915
BRANCH=rambi (and technically haswell, but may not be worth merging)
TEST=Try booting a system with a bad power rail; see that SUSP_VR_EN=0
after the system fails to boot.
Change-Id: Ifd10841d298a0f2510a8b182250b717ea5643c99
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/183733
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Renaming file names is the first step. Please see issue tracker
for more details.
BUG=chrome-os-partner:24832
BRANCH=link,falco,samus,rambi,peppy
TEST=build all x86 boards.
make clean BOARD=link && make -j32 BOARD=link && \
make clean BOARD=falco && make -j32 BOARD=falco && \
make clean BOARD=samus && make -j32 BOARD=samus && \
make clean BOARD=rambi && make -j32 BOARD=rambi && \
make clean BOARD=peppy && make -j32 BOARD=peppy
Change-Id: I3a296a0c14f6bebefa858438b1320061ac71dd38
Signed-off-by: Louis Yung-Chieh Lo <yjlou@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/181400
Reviewed-by: Randall Spangler <rspangler@chromium.org>
This make minor syntactic changes and renames some camel-cased symbols
to keep checkpatch from complaining. The goal is to reduce the
temptation to use 'repo upload --no-verify'.
This is a big furball of find/replace, but no functional changes.
BUG=chromium:322144
BRANCH=none
TEST=build all boards; pass unit tests
Change-Id: I0269b7dd95836ef9a6e33f88c003ab0f24f842a0
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/180495
This fixes a bug in which after a sysjump, the sleep_mask is
reset, and the EC is allowed to go into a low power mode even
though the AP is still running. This causes numerous problems,
must notable of which is that a flashrom write fails with an
EC protocol mismatch error.
BUG=chrome-os-partner:23645
BRANCH=none
TEST=Execute a flashrom write and make sure the system does not
use the low power code immediately after.
Change-Id: I4d50282da0c5ba5b6488ed14a267a4d8cafe09a7
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/174943
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
The common/ subdir was getting cluttered. Move drivers for external
components to a new driver/ tree, and move what used to be called
chipset_*.c to a new power/ directory.
This does not move/rename header files or CONFIG options. That will
be done in subsequent steps, since moving and modifying .c files in
the same CL is harder to review.
BUG=chrome-os-partner:18343
BRANCH=none
TEST=build all boards; pass unit tests
Change-Id: I67a3003dc8564783a320335cf0e9620a21982d5e
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/173601
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Tested-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-by: Vic Yang <victoryang@chromium.org>
