define CONFIG_CMD_BATDEBUG to enable console commands.
If the battery is larger than 6Ah or smaller than 150mAh, scale the parameters
transparently to the user using macros.
BUG=chrome-os-partner:34477
BRANCH=none
TEST=Custom console commands for the fuel gauge
I also used a Logic16 from Saleae and the fuel gauge on hadoken.
Signed-off-by: Myles Watson <mylesgw@chromium.org>
Change-Id: I959d51c3188336e4ad0983528ad7e53a2955a764
Reviewed-on: https://chromium-review.googlesource.com/234285
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Tested-by: Myles Watson <mylesgw@chromium.org>
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Commit-Queue: Myles Watson <mylesgw@chromium.org>
This conversion is needed in files outside of system.c, so add a new
function.
BUG=chrome-os-partner:34599
TEST=Manual on samus_pd. Run "pd 0 info" and verify "Image RW" is
printed.
BRANCH=Samus
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Change-Id: Ia905ba9cf985f3714fa75c81670b8a39e9608f3d
Reviewed-on: https://chromium-review.googlesource.com/236980
Tested-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Commit-Queue: Shawn Nematbakhsh <shawnn@chromium.org>
This addition allows the AP to query whether the PD device is currently
running from RO or RW FW.
BUG=chrome-os-partner:34599
TEST=Manual on Samus. Run 'ectool --name cros_pd infopddev 0' and verify
that correct RO/RW status of Zinger is printed. Verify that the output
matches the index printed by "pd 1 hash" on samus_pd console.
BRANCH=Samus
Change-Id: I4266cae931f5c7855ca0531717c4a18b138b2d62
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/236771
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Modify board_set_active_charge_port to return status indicating whether
the selected charge port was rejected. If rejected, zero out its
available charge and attempt to select a different charge port.
Also, reduce the length of related console prints.
BUG=chrome-os-partner:34677
TEST=Manual on Samus. Plug C-to-Arec into port 1, verify that charge
manager does not select port 1 as active and charging icon is not seen
in OS.
BRANCH=Samus.
Change-Id: I56e3337f90c04b93ef7cc9873af6ee0f4b1ffc7d
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/236361
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Allow CONFIG_CHARGER_MIN_BAT_PCT_FOR_POWER_ON to be defined at the board
level to be the minimum battery percentage required for power-on. If the
battery level is below the threshold, or if the battery is missing,
power button presses will be ignored.
BUG=chrome-os-partner:31127
TEST=Manual on Samus with subsequent commit. Verify that AP continues
to boot normally when charge level exceeds
CONFIG_CHARGER_MIN_BAT_PCT_FOR_POWER_ON. Verify that power button
presses are ignored when the charge level is below the threshold, and
we return to G3.
BRANCH=Samus
Change-Id: I0ff3f7ddabf38080332470e172c8b2e307bf1655
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/236021
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Added check for collision just before transmitting on CC line.
To check for collision, RX monitoring is left on all the time
(except when in the act of receiving or transmitting, or in
between receiving and sending a goodCRC), and a
simple check for RX transmission started is used to see if the
CC line is idle or not.
RX monitoring is also changed to only trigger on 3 edges within
20us, as per the PD spec.
When a collision is detected by seeing that CC is not idle, the
transmitting packet is dropped.
BUG=chrome-os-partner:30135
BRANCH=samus
TEST=load onto samus and zinger. make sure we negotiate and make
sure custom VDMs succeed. enabled pings and made sure we stay
alive with pings for a few min.
Also added code to pd_rx_handler to toggle a test point on EVT
board to verify the timing of when we get RX interrupts:
Change-Id: I22d172163319437d3d901e019eda79d4d592f6b8
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/226118
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Add a rate limiter to host commands so that a host that is continuously
sending host commands doesn't watchdog the EC.
BUG=chrome-os-partner:33905
BRANCH=samus
TEST=loaded onto samus and tested remote update of zinger 10 times.
also tested EC + PD software sync.
Change-Id: Ia024179c46b2180ee97ea1902de343306142311c
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/235530
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
In order to reduce flash size on some constrained boards this CL
modifies the GPIO macro in gpio_list.h to change the name field from
that listed 'name' to the concat of 'port' and 'pin'.
Signed-off-by: Todd Broch <tbroch@chromium.org>
BRANCH=samus
BUG=chrome-os-partner:34489
TEST=manual
1. build with and without CONFIG_COMMON_GPIO_SHORTNAMES
See 897 bytes savings with config option
2. See reduced names for gpioget
> gpioget
0 E6
0 F2
1 B0
Change-Id: Ife1e1e2bcfa620ba87fe6c1ce2b47fe258c46514
Reviewed-on: https://chromium-review.googlesource.com/234587
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Commit-Queue: Todd Broch <tbroch@chromium.org>
Tested-by: Todd Broch <tbroch@chromium.org>
Ryu sensor hub has asymectric RO/RW images. The first one is very limited
(not i2c master, no sensor drivers, gesture recognition).
Image size is alter to offer more space for the RW firmware image,
compiled with ryu_sh board.
To write RO image and basic RW image:
flashrom -V -p ec:type=sh,block=0x800 --fast-verify -w /tmp/ryu_sh_loader/ec.bin
To write the expected RW image:
flashrom -V -p ec:type=sh,block=0x800 --fast-verify -w -i EC_RW:/tmp/ryu_sh/ec.bin
BRANCH=ToT
BUG=chrome-os-partner:33908
CQ-DEPEND=CL:231970,CL:233233
TEST=load on Ryu, confirmed limited operation.
Change-Id: Ib976e2b048935adfb9b2b072c071db5be2bc1c09
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/231984
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Add high (and low) battery temperature warning which sends host
event to AP. After 30 seconds of out of range temp readings force
shut off AP and hibernate the EC.
BUG=chrome-os-partner:27641, chrome-os-partner:33111
BRANCH=samus
TEST=make buildall, and write unit tests to test this condition.
Change-Id: I95b7d9d753c17e4b76218a9845aa63dd1b96a500
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/235645
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
On samus it is possible to have AC plugged in but have the battery
discharging. So, add a new variable to charge state machine for
battery charging status and use that where necessary. For example,
the low battery shutdown code should now be based on whether or
not battery is charging rather than if AC is present.
This also changes the hibernate behavior when battery is low. The
change is to wait 30 seconds in G3 of low battery with no charging
before hibernating because for some chargers, like a USB PD charger,
the charger may increase it's current limit after a little bit of
time.
BUG=chrome-os-partner:34485
BRANCH=samus
TEST=test on samus. use low power charger and make sure that
ectool battery shows the "DISCHARGING" flag. use zinger and see
"CHARGING" flag. also use power_supply_info to make sure that
the battery state accurately reflects reality.
Change-Id: I8ac0267dd393071c4ca1fa24fbc9a13bf27848a9
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/235491
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Remove common code across all PD policy layers to select the requested
voltage and build a Request Data Object (RDO).
BUG=none
BRANCH=samus
TEST=Load onto samus and connect zinger. Make sure we request the right
voltage (first 5V, then after initial contract is made, 20V). Make
sure input current limit is set appropriately by checking limit on EC
console using charger command.
Change-Id: Ic6bda5e23b2d7b7d710ffdf085e7fbc1b0c3add9
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/233673
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Commit-Queue: Shawn Nematbakhsh <shawnn@chromium.org>
Tested-by: Shawn Nematbakhsh <shawnn@chromium.org>
This exposes the pd_exchange_status() function and lets it
return the charge port that the PD reports, so that the lightbar
TAP sequence can decide which direction to display.
BUG=chrome-os-partner:32227
BRANCH=ToT, samus
TEST=make buildall -j
Change-Id: I78b57fbeaaf38fee15c86eca4d90abce77e2f722
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/232092
Reviewed-by: Alec Berg <alecaberg@chromium.org>
If override charge is selected on a port currently acting as a charge
source, but the attached device is also capable of acting as a source,
request a charge role swap and initiate a pending delayed port override.
If the role swap completes successfully and a charge source is found,
the selected port will become the override port. If the role swap fails
or no charge source is found within 2 seconds, the delayed port override
will be lost.
BUG=chrome-os-partner:28343,chrome-os-partner:31195
TEST=Manual on Samus. Connect two Samus units together through charge
ports.
"pd 1 swap power" - put port on test device into source role
"chgoverride 1" - set charge override, verify that role swap takes
effect and charge manager selects PD charge source, 900mA @ 5V
Disconnect charge cable, verify that charge manager goes back to not
charging.
BRANCH=Samus
Change-Id: Iadcc4dc98631661f254245eeff18973df517f652
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/231900
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Before sysjump we need to send a soft reset to any attached devices
and then disable PD communication so that we don't re-negotiate again
before the sysjump. This will guarantee expected message ID is cleared
for after the sysjump.
This also moves executing soft reset from before sending the soft reset
command to after the port partner accepts a soft reset.
BUG=none
BRANCH=samus
TEST=test on samus. without this change, when sysjumping the PD MCU
has time to re-negotiate (at least partially) before the sysjump, which
causes various problems. with this change, when sysjumping, the PD
MCU sends soft reset, and then does not send anything else.
Change-Id: Id7a60c62c8908ee4ab33dfbe995ef136b0aa83de
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/233751
CL to migrate the flashing VDMs from zinger's custom vdm to
common/usb_pd_flash.c such that other updateable type-C devices can
share.
Additionally adds gaskets to call standard runtime flashing facilities
for USB-PD devices using it.
Signed-off-by: Todd Broch <tbroch@chromium.org>
BRANCH=samus
BUG=chrome-os-partner:31192,chrome-os-partner:31193
TEST=manual,
Try following:
1. From samus_pd console w/ zinger in port 1
pd 1 flash version
pd 1 flash reboot
pd 1 flash info
2. From samus linux prompt w/ zinger in port 1
ectool --name cros_pd flashpd 1 1 <zinger RW payload>
Reading 16384 bytes from
/usr/local/zinger_v1.1.2528-d809e42.ec.RW.bin...
Erasing expected RW hash
Rebooting
Erasing RW flash
Writing RW flash
Rebooting PD into new RW
Complete
3. Repeat 1&2 above on hoho & dingdong.
Change-Id: I018055fa9de128f937c57debdc21dea026137bcf
Reviewed-on: https://chromium-review.googlesource.com/231835
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Tested-by: Todd Broch <tbroch@chromium.org>
Commit-Queue: Todd Broch <tbroch@chromium.org>
dingdong/hoho have no capability to measure VBUS which is advantageous
in determining what timeouts to honor. Previously we simply assumed
vbus was on and that made things happy until,
e0c80ac pd: on hard reset go to a hard reset recovery state
which introduced proper handling around sink & source reset recovery.
With VBUS assumed 'on' this leads to short timeouts chosen
(PD_T_SAFE_0V) which in turn causes sink to resend hard resets before
source has had time (PD_T_SRC_RECOVER) to handle request.
This change creates config CONFIG_USB_PD_NO_VBUS_DETECT for devices
without the capability to account for lack of VBUS detect.
Signed-off-by: Todd Broch <tbroch@chromium.org>
BRANCH=samus
BUG=chrome-os-partner:34090
TEST=manual
from samus_pd 'pd 1 flash reboot' is successful
Change-Id: I9ef9b0115c7be6c56c64556d2ce8c296f95c614e
Reviewed-on: https://chromium-review.googlesource.com/233024
Tested-by: Todd Broch <tbroch@chromium.org>
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Commit-Queue: Todd Broch <tbroch@chromium.org>
A non-zero error code returned by the callback causes EP0 to STALL.
This is the common mechanism used in USB to indicate an error while
processing a control request. This simplifies the implementation
of interface callbacks.
Signed-off-by: Anton Staaf <robotboy@chromium.org>
BRANCH=None
BUG=None
TEST=make buildall -j
Change-Id: I89ceb4892f9f810fcaf6e975e6982fc5b2ae447b
Reviewed-on: https://chromium-review.googlesource.com/232368
Reviewed-by: Anton Staaf <robotboy@chromium.org>
Commit-Queue: Anton Staaf <robotboy@chromium.org>
Tested-by: Anton Staaf <robotboy@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
For accessories without software-sync mechanism, add the option to do a
RSA-based signature verification of the Read-Write firmware.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BRANCH=samus
BUG=chrome-os-partner:31192
TEST=enable the configuration on Fruitpie and see the RW firmware
validated and jump to. Tried with good and bad RW images.
Change-Id: I3c886c2cbe17ca9543e19bf8599061c3f9751d4f
Reviewed-on: https://chromium-review.googlesource.com/229594
Reviewed-by: Todd Broch <tbroch@chromium.org>
Commit-Queue: Todd Broch <tbroch@chromium.org>
Tested-by: Todd Broch <tbroch@chromium.org>
Add active charge port for the PD status exchange so that EC
knows which port we are currently charging from.
BUG=chromo-os-partner:32227
BRANCH=samus
TEST=load onto samus. use "pdcmd 0x100 0 0"
from EC console to read the active charge port and
verify that it matches which port we are charging from.
Change-Id: I419befef8f0a14ca2da237be1a4944fd08733b83
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/231349
Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org>
Remove host_event_commands.c from build to save flash space. The
PD MCU does not use host event infrastructure and instead has a
simple gpio line it uses to notify EC that it has info to share.
BUG=none
BRANCH=samus
TEST=make buildall. view the .map file and see we save about 700
bytes of flash.
Change-Id: I71b8a4e32b9ecb57eb1a57f6d28652476ee6afe6
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/231444
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
I need more information to find the source of some problems. This
just adds a little more context to the lightbar console messages.
BUG=chrome-os-partner:33401
BRANCH=ToT,samus
TEST=make buildall -j
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Change-Id: I97a210754833c9384eae517f9df2e97d3a9ea6b4
Reviewed-on: https://chromium-review.googlesource.com/231136
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Added new hard reset recovery states for sink and source state machines
and transition there on hard reset. This is necessary because on a hard
reset we are not supposed to turn off vconn, nor disconnect USB, nor
switch the data role. In other words hard reset is not the same as a
disconnect.
This also changes timing around when to send source cap after a hard
reset and when to expect source cap after hard reset.
This also adds a delay between sending hard reset and executing it to
give time for sink to recognize the hard reset as differentiated from
a disconnect when VBUS goes down.
For sink, when a hard reset is issued or received, sink waits for VBUS
to go away, then for VBUS to come back, and then starts the sink wait
cap timer.
BUG=none
BRANCH=samus
TEST=make buildall
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Change-Id: Icb6ceaf242cebfcf8d08d7317976f83286a256ff
Reviewed-on: https://chromium-review.googlesource.com/228111
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Ensure that the PD source changes the output voltage after
tSnkTransition delay after having sent the ACCEPT message
(rather than before).
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BRANCH=samus
BUG=chrome-os-partner:33684
TEST=connect Zinger to a PD power sink and monitor VBUS and CC while
doing a 20V to 5V transition.
Change-Id: If86f59eec67630491f4e8dc13a52015ac2de918a
Reviewed-on: https://chromium-review.googlesource.com/230805
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Commit-Queue: Vincent Palatin <vpalatin@chromium.org>
Tested-by: Vincent Palatin <vpalatin@chromium.org>
The latest gcc picked up a couple out-of-bounds issues, so
"make buildall" was failing. This fixes them.
BUG=none
BRANCH=ToT
TEST=make buildall -j
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Change-Id: Idcd6a3358ecbb0e0d2a610e1cd28c2f138ce520b
Reviewed-on: https://chromium-review.googlesource.com/231156
Reviewed-by: Randall Spangler <rspangler@chromium.org>
For USB console, we wait for USB host to grab the data before writing
the next chunk of characters. However, if the USB peripheral is
disabled, the current implementation is confused as to whether the host
has grabbed the previous chunk of data.
Fix this by explicitly checking for USB peripheral enabled.
BRANCH=ryu
BUG=None
TEST=Boot on Ryu and check console isn't slow.
Signed-off-by: Vic Yang <victoryang@chromium.org>
Change-Id: I438c95835e56707b7ca1796734f2e47062799f44
Reviewed-on: https://chromium-review.googlesource.com/231115
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Add host command to set charge port override.
BUG=chrome-os-partner:32003
BRANCH=Samus
TEST=Manual on Samus. Insert PD charger in port1 and BC1.2 charger in
port0.
./ectool --name=cros_pd chargeoverride 0 --> Charges from port 0
./ectool --name=cros_pd chargeoverride off --> Charges from port 1
./ectool --name=cros_pd chargeoverride dontcharge --> No charge port
./ectool --name=cros_pd chargeoverride 1 --> Charges from port 1
./ectool --name=cros_pd chargeoverride 2 --> Correctly returns error
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Change-Id: Ib35f797a4a24e96fd2e3c008ace3fd6291b89d25
Reviewed-on: https://chromium-review.googlesource.com/230910
Reviewed-by: Alec Berg <alecaberg@chromium.org>
The role of hoho & dingdong is UFP, and the corresponding protocol
fields in VDO (vdo_idh) should reflect it.
Fix error in IDH_PTYPE definitions of SVDM Identity Header, it's reversed
Adds more legible names to protocol field constants
BUG=none
BRANCH=none
TEST=make buildall
Change-Id: Idac9327bf3e8e9597221654bce80bb311b3304af
Reviewed-on: https://chromium-review.googlesource.com/230657
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Reviewed-by: Todd Broch <tbroch@chromium.org>
Commit-Queue: Bernard Shyu <bernard_shyu@bizlinktech.com>
Tested-by: Bernard Shyu <bernard_shyu@bizlinktech.com>
Add commands to send PD packets and to tweak individual parameters (TX
clock frequency, RX detection threshold, resistors on CCx).
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BRANCH=none
BUG=chrome-os-partner:28337
TEST=verify that the PD sniffing is still working by dumping traffic
between Zinger and Samus.
Connect Twinkie to Zinger, set Rd by using "tw res NONE RD" and see VBUS
going to 5V (reading it using "ina 0").
Send a BIST mode 2 request using the following command :
tw send 2 0x1043 50000000
and see the other end starting sending BIST.
Change-Id: I3c8ddf858435ac1c17a43f59351bbaa69603a209
Reviewed-on: https://chromium-review.googlesource.com/227778
Reviewed-by: Todd Broch <tbroch@chromium.org>
Commit-Queue: Vincent Palatin <vpalatin@chromium.org>
Tested-by: Vincent Palatin <vpalatin@chromium.org>
With this change we can use power event to configure sensors
and trigger motion detection in suspend.
BUG=chrome-os-partner:31071
BRANCH=ToT
TEST=Check power states. Check power up messages and commands are
present at the console.
Message at boot:
[0.007142 hash start 0x00010000 0x000096dd]
[0.007293 Inits done]
[0.007506 power state 2 = S3, in 0x0000]
[0.007765 power state 3 = S0, in 0x0000]
[0.007908 event set 0x00002000]
[0.008021 hostcmd init 0x2000]
[0.146870 hash done
f87d7824b439db923d270df016af5aabec51b73505b7c4faa6e40c16b12dd392]
Change-Id: I9c56fe5203506462f0820bbc8a5fe4528f6805ac
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/226881
Reviewed-by: Sheng-liang Song <ssl@chromium.org>
Reviewed-by: Alec Berg <alecaberg@chromium.org>
MOTIONSENSE_CMD_DUMP is deprecated, replaced with MOTIONSENSE_CMD_GET_DATA
Also use vector_3_t instead of x,y,z
ectool motionsense commands only work with newer firmware, to
handle a dynamic number of sensors.
- The host sends the number of sensor it has allocated space for.
- If 0, the EC just sends the number of sensors available
- Otherwise returns sensor information up to the limit imposed by the host.
Remove MOTIONSENSE_GET_STATUS: not needed. It is only useful for LPC,
to guarantee atomicity of the data.
Remove MOTIONSENSE_GET_DATA: not needed since we increase the version
number of MOTIONSENSE command.
BUG=chrome-os-partner:31071,chromium:430792
BRANCH=ToT
TEST=Compile. On a firmware that support the new command:
/usr/sbin/ectool --name=cros_sh motionsense
Motion sensing active
Sensor 0: 92 15 1030
Sensor 1: -94 -63 718
/usr/sbin/ectool --name=cros_sh motionsense active
0
On a machine with older firmware (samus), check these
functions are not working anymore.
Change-Id: I64b62afff96670fb93457760d43d4e64e26e029f
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/226880
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Factory test process need lid switch no function or keep lid opened
BUG=chrome-os-partner:33304
BRANCH=paine,yuna
TEST=Run command "ectool forcelidopen 1" and "reboot". Then lid close
quickly, the system boot as lid opened.
Deault value or run command "ectool forcelidopen 0" make the device normal.
Change-Id: I94527b7ef7f9efe779c6b86f3eab651f99af6000
Signed-off-by: Henry Hsu <Henry.Hsu@quantatw.com>
Reviewed-on: https://chromium-review.googlesource.com/230180
Reviewed-by: Mohammed Habibulla <moch@chromium.org>
Reviewed-by: Bowgo Tsai <bowgotsai@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Commit-Queue: Shawn Nematbakhsh <shawnn@chromium.org>
Tested-by: Shawn Nematbakhsh <shawnn@chromium.org>
Add a Google Firmware Update alternate mode to zinger. This mode must
be entered in order to allow the unstructured VDMs that we use for
sending a new firmware.
BUG=chrome-os-partner:33754
BRANCH=samus
TEST=load on samus and zinger. see that "GFU" is printed on zinger console
to represent that it entered GFU mode. use twinkie to see that samus
sent discover identity, discover svids, discover modes, enter mode, and
then read info. See on samus pd console that we received result of read
info. from samus pd console with zinger attached:
> pe 1 dump
IDENT:
[ID Header] 2c0018d1 :: AMA, VID:18d1
[Cert Stat] 00000000
[2] 50100001 [3] 00000003 [4] 52136b91 [5] 0401137d
SVID[0]: 18d1 MODES: [1] 00000000
MODE[1]: svid:18d1 caps:00000000
Also, use a samus with cros_pd_update running in kernel, and see that zinger
auto-updates when plugged in. Performed 10 updates with no failures.
Change-Id: I8d4d38e4a9f649fe0889f688f262630ef55106ee
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/229622
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Allow to use larger RSA keys by setting CONFIG_RSA_KEY_SIZE to 4096 or
8192 rather than using the default 2048-bit size.
It's mainly for benchmarking purpose right now as we don't have the RAM
to store the 3x key size buffer and the flash space for the public key
structure.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BRANCH=samus
BUG=none
TEST=build Zinger with CONFIG_RSA_KEY_SIZE equals to 4096 and run it.
Change-Id: I9839121bf158d0a30dde1e48d875f345191bfec2
Reviewed-on: https://chromium-review.googlesource.com/228925
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Commit-Queue: Vincent Palatin <vpalatin@chromium.org>
Tested-by: Vincent Palatin <vpalatin@chromium.org>
Allow policy layer to request a PR or DR swap upon formation of
a power contract. Zinger always asks for a data swap so it can
be a UFP, and Samus asks for a data swap only if it is a UFP to
become a DFP.
BUG=chrome-os-partner:33754, chrome-os-partner:31195
BRANCH=samus
TEST=load onto samus and zinger and make sure they swap roles
upon connect with no collisions
Change-Id: I275c9669549c26f25c58f80845daad8edab11313
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/229327
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Add support for DR_swap, data role swap command.
BUG=chrome-os-partner:33686, chrome-os-partner:28343
BRANCH=samus
TEST=test with samus and zinger. use "pd 1 swap data" command
and verify data role swaps by using twinkie and "pd 1 state".
Change-Id: I410309199cdeecb26847a6bf217523fdfe688cba
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/229192
Disable most of the pd console command to save space. The command
can still be used with subcommands "state" and "dump" to get state
information and change debug level.
BUG=none
BRANCH=none
TEST=make buildall with CONFIG_CMD_PD defined and undefined. Also
undefined the config option and loaded onto samus and verified that
the pd 0 state command still works.
Change-Id: Ie41bad53122a1e2a9ef4bad6423b9cdc85f53742
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/229420
Reviewed-by: Vic Yang <victoryang@chromium.org>
This enables forwarding of the local PD/EC console
over debug USB. It gates the console functionality
based on the CCD mode that is set.
Signed-off-by: Anton Staaf <robotboy@chromium.org>
BRANCH=None
BUG=None
TEST=make buildall -j
Enable partial CCD mode on ryu and verify that it is
enumerated by the host correctly, but doesn't respond
to console input, and doesn't generate output.
Enable full CCD mode on ryu and verify that it is
enumerated and that the console works as expected.
Verify that the console still works by default on the
discovery-stm32f072 board.
Change-Id: I0325ce9689486c41387d6075330be1d7d42f1d42
Reviewed-on: https://chromium-review.googlesource.com/229342
Reviewed-by: Anton Staaf <robotboy@chromium.org>
Commit-Queue: Anton Staaf <robotboy@chromium.org>
Tested-by: Anton Staaf <robotboy@chromium.org>
