Make large battery struct array constant to save RAM space
BUG=none
BRANCH=samus
TEST=make -j buildall. check ec.RO.map and see 96 bytes
RAM saved.
Change-Id: I181138eb79138f6e7bb25738c669232cfa0d31b7
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/238211
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Previously if you were working on a single board you had to add BOARD=
to all of your make command lines. Now if you are in a board directory
you can just use "make", or "make clean", or any other top level make
command.
This commit also adds support for a top level "make flash" command that
can be used from the board directories as well. This command uses
openocd and requires that the board provides an openocd-flash.cfg file.
Signed-off-by: Anton Staaf <robotboy@chromium.org>
BRANCH=none
TEST=(from a few board directories) make clean; make -j
(from the discovery-stm32f072 directory) make flash
Change-Id: Ie09a74881371169a2c3cd9cd9922f39f4873f1a6
Reviewed-on: https://chromium-review.googlesource.com/209669
Tested-by: Anton Staaf <robotboy@chromium.org>
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Commit-Queue: Anton Staaf <robotboy@chromium.org>
This is a straightforward conversion of existing tables
into X-Macro style definitions for the GPIO alternate
functions. This change in itself, is not particularly
powerful, but having all GPIO settings in a single file
makes a board easier to understand.
Signed-off-by: Anton Staaf <robotboy@chromium.org>
BRANCH=none
TEST=make buildall -j
Followed by manual testing of interrupt on change and UART
functionality on STM32F0 based discovery board.
Change-Id: Ib7f1f014f4bd289d7c0ac3100470ba2dc71ca579
Reviewed-on: https://chromium-review.googlesource.com/207987
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Tested-by: Anton Staaf <robotboy@chromium.org>
Commit-Queue: Anton Staaf <robotboy@chromium.org>
(cherry-pick back to ToT)
The comment #20 of issue 29162 looks like a stack overflow to me.
The issue 29067 also shows the stack is overflowed in some case.
Let's increase that.
BUG=chrome-os-partner:29067,chrome-os-partner:29162
BRANCH=nyan,tot
TEST=build only. Should run RunIn.DozingStress.SuspendResume/RunIn.Reboot2.
Change-Id: Ic7fc7c8fa9e817b2db497ebedcdff6cb8c49c565
Origin-Change-Id: If3b97af578362eb6d2794b331716f499be7ad066
Signed-off-by: Louis Yung-Chieh Lo <yjlou@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/204277
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/206921
These files are tabular data more than source code. We discussed
and concluded that the 80-column limit makes them harder to read,
not easier. This commit reformats them to take advantage of
longer lines, mainly by putting per GPIO comments on the end of
the line that defines the GPIO.
Signed-off-by: Anton Staaf <robotboy@chromium.org>
BRANCH=none
TEST=make buildall -j
Change-Id: I60f3e3620680196eb9462f97b34c453289240465
Reviewed-on: https://chromium-review.googlesource.com/205672
Tested-by: Anton Staaf <robotboy@chromium.org>
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Commit-Queue: Anton Staaf <robotboy@chromium.org>
Previously each board.h and board.c contained an enum and an array
for gpio definitons that had to be manually kept in sync, with no
compiler assistance other than that their lengths matched.
This change adds a single gpio.inc file that declares all gpio's
that a board uses and is used as an X-macro include file to
generate both the gpio_signal enum and the gpio_list array.
Signed-off-by: Anton Staaf <robotboy@chromium.org>
BRANCH=none
TEST=make buildall -j
Change-Id: If9c9feca968619a59ff9f20701359bcb9374e4da
Reviewed-on: https://chromium-review.googlesource.com/205354
Tested-by: Anton Staaf <robotboy@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Commit-Queue: Anton Staaf <robotboy@chromium.org>
Our code base contains a lot of debug messages in this pattern:
CPRINTF("[%T xxx]\n") or ccprintf("[%T xxx]\n")
The strings are taking up spaces in the EC binaries, so let's refactor
this by adding cprints() and ccprints().
cprints() is just like cprintf(), except that it adds the brackets
and the timestamp. ccprints() is equivalent to cprints(CC_CONSOLE, ...)
This saves us hundreds of bytes in EC binaries.
BUG=chromium:374575
TEST=Build and check flash size
BRANCH=None
Change-Id: Ifafe8dc1b80e698b28ed42b70518c7917b49ee51
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/200490
Reviewed-by: Randall Spangler <rspangler@chromium.org>
So that host and EC commands will be defined in common/battery.c.
The board-specific battery.c can focus on the proprietary method.
BUG=chrome-os-partner:28248
BRANCH=tot,nyan
TEST=make buildall runtest
Tested "cutoff" in EC console on big.
Change-Id: I213c0d601d0241c8dea309d6ac60c72452d2d100
Signed-off-by: Louis Yung-Chieh Lo <yjlou@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/196621
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Charger v2 assumes the battery_get_info() always returns non-NULL even
if the battery is not detected, for example, in the over-drained
situation. Thus, add a new struct so that we know what the conservative
setting is to pre-charge the unknown battery.
BUG=chrome-os-partner:28112
BRANCH=nyan,big,blaze
TEST=See issue tracker for the test procedure.
Change-Id: Ica4fe75d154e2f195eb1da19ba045346da383b6c
Signed-off-by: Louis Yung-Chieh Lo <yjlou@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/195596
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-by: Devin Lu <Devin.Lu@quantatw.com>
Tested-by: Devin Lu <Devin.Lu@quantatw.com>
This would move all tegra boards to charger v2.
Also removed the unnecessary charge_keep_power_off(), which was
designed for USB power port and doesn't apply to Tegra platform.
BUG=none
BRANCH=nyan,big,blaze
TEST=build and run on nyan.
Change-Id: I9517a8885726ad6dce5a2865402da4b9551e009f
Signed-off-by: Louis Yung-Chieh Lo <yjlou@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/194384
Commit-Queue: Bill Richardson <wfrichar@chromium.org>
Reviewed-by: Devin Lu <Devin.Lu@quantatw.com>
Tested-by: Devin Lu <Devin.Lu@quantatw.com>
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Making room for a new charge_state implementation.
BRANCH=ToT
BUG=chrome-os-partner:23776
TEST=make buildall -j
No new functionality, just renaming some files.
Change-Id: I80ce861f09129a518e180cac20d32e867a93cd46
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/190852
Reviewed-by: Randall Spangler <rspangler@chromium.org>
After Alex's CL 8a9817a, the i2c driver no longer hardcodes the
I2C port pin (Ya!). Remove the conflict pin setting in board files.
BRANCH=nyan,big
BUG=chrome-os-partner:26620
TEST=build and run on nyan board. Everything looks good.
Change-Id: Iee2c5f10f642da7ad00f503b6e615cb6aa472459
Signed-off-by: Louis Yung-Chieh Lo <yjlou@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/189245
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Refactored the i2c unwedge code to place it in the common directory
so that any EC chip can use it.
Added to the STM32F and LM4 boards, code to automatically detect and
unwedge the i2c bus at the start of an i2c transaction. Note that STM32L
already had this ability.
To enable unwedging of the i2c port though, the gpio pins for SDA and
SCL must be defined in the i2c_ports[] array in the board.c file. This
allows the i2c module to bit bang the unwedging for the given port. If
SDA and SCL are not defined for the port, then the unwedge code will
not run.
BUG=chrome-os-partner:26315, chrome-os-partner:23802
BRANCH=none
TEST=Manual testing on machines with different EC chips.
Testing made extensive use of https://chromium-review.googlesource.com/66389
in order to force wedging of the i2c bus so that we can attempt to unwedge
it. Note that you can easily test if the bus is wedged by running i2cscan.
On pit and spring:
On pit, after each of the following, I verified that the bus was automatically
unwedged.
On spring, the unwedge only runs at reboot, so, for the non-reboot wedge
commands, I manually ran console command unwedge, and verified that the bus
became unwedged.
(1) Bit bang a transaction but only read part of the response.
Command to wedge: i2cwedge 0x90 0 2 2
(2) Bit bang a transaction to do a "write" and stop while the other side is
acking. Command to wedge: i2cwedge 0x90 0 1
(3) Same as (1) but do a reboot instead of returning and see
that the unwedge works at init time w/ no cancelled transactions.
Command to wedge: i2cwedge 0x90 0 6 2
(4) Same as (2) but do a reboot instead of returning and see
that the unwedge works at init time w/ no cancelled transactions.
Command to wedge: i2cwedge 0x90 0 5
On glimmer:
Added code to call i2c_unwedge in accel_init(). Then tested unwedging the
accelerometer with the following. One extra difficulty testing this with
the accelerometer is that sometimes the bit you stop on is high, which
means it won't be wedged at all, the next start transaction will reset
the bus. So, sometimes running i2cwedge won't wedge the bus and sometimes
it will depending on the acceleration data.
(1) Big bang transaction to do a "read" of accelerometer and stop partway:
i2cwedge 0x1c 0x0f 2 2
i2cscan to make sure bus is actually wedged
i2cunwedge
i2cscan to make sure bus is now unwedged.
(2) Bit bang transaction to do a "read" and stop partway, then reboot:
i2cwedge 0x1c 0x0f 6 2.
i2cscan to verify that the bus is working after the reboot.
Change-Id: Ie3328e843ffb40f5001c96626fea131c0f9ad9b1
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/188422
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Nyan uses common/charge_state instead. So, fix the dependence.
Since snow/spring/pit are using common/pmu_tps65090_charger, keep them.
BUG=None
BRANCH=Nyan
TEST=build and works fine on Nyan 3.2
Change-Id: I985f7980578ac22602b1fbffa51edf039078bc05
Signed-off-by: Louis Yung-Chieh Lo <yjlou@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/186337
Reviewed-by: Randall Spangler <rspangler@chromium.org>
For the better naming for power/common.h, we rename CONFIG_CHIPSET_X86
to CONFIG_POWER_COMMON (no one is actually using it). But keep
CONFIG_CHIPSER_TEGRA for power/build.mk.
BUG=chrome-os-partner:25068
BRANCH=nyan,falco,link,peppy,rambi,samus,squawks
TEST=build only
Change-Id: Ibf1a4c24088dfddac39b38a95b3b887c195152d5
Signed-off-by: Yung-Chieh Lo <yjlou@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/182732
Integrate with power/common.c -- a real state machine now. Also remove
duplicate and unused functions/consts.
BUG=chrome-os-partner:24831
BRANCH=nyan
TEST=on nyan rev 3.12.
re-plug AC: PASS, power on 2
reboot: PASS, power on 2
power off (S5), power on: PASS, power off 4, power on 5
power off (G3), power on: PASS, power off 4, power on 5
lid close / power off (S5)/ lid open: PASS, power on 3
lid close / power off (G3)/ lid open: PASS, power on 3
press power button and release: nothing happens after 15s.
button off (S5)/ on: PASS, power off 3, power on 4
button off (G3)/ on: PASS, power off 3, power on 4
power off (S5)/ button on: PASS, power off 4, power on 4
power off (G3)/ button on: PASS, power off 4, power on 4
button off (S5)/ power on: PASS, power off 3, power on 5
button off (G3)/ power on: PASS, power off 3, power on 4
button off (S5)/ lid open: PASS, power off 3, power on 3
button off (G3)/ lid open: PASS, power off 3, power on 3
is off, long press button (60s): power on 4, too long, shutdown, stay off
is on, long press button (60s): power off 3, stay off
apreset cold: entered to S5, power off 3, power on 5
apreset warm: power state is not changed, but reboots to BIOS.
Change-Id: Ie12fa4f79b6156f71f89155b2b01880914809c75
Signed-off-by: Louis Yung-Chieh Lo <yjlou@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/182348
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Vboot hash calculation takes ~350 ms during EC boot. Since the hash
task is higher priority than the hook task, this starves all the hooks
during boot.
We could, in theory, fix that simply by swapping the priority of the
hook and hash tasks. But then watchdog detection (in the hook task)
wouldn't detect hangs in the hash task.
A better fix (implemented here) is to convert the hashing operation to
a series of deferred function calls. This gets rid of the hash task
entirely, and allows all pending hooks and other deferred function
calls to take place between each chunk of hashing.
On STM32-based boards, we need to bump up the hook task stack size,
since hashing is called from several layers deep in the hook task
instead of at the top of its own task, but this is still a net win of
several hundred bytes of SRAM.
BUG=chrome-os-partner:24892
BRANCH=rambi
TEST=Boot EC; look for "hash start" and "hash done" debug output.
'taskinfo' shows at least 32 bytes of unused stack for HOOKS task.
'hash ro' runs properly from EC console.
Change-Id: I9e580dc10fc0bc8e44896d84451218ef67578bbe
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/181954
Old code reset some GPIO configurations with af->flags = 0 while
gpio_config_module(). This is bad because it could lead unexpected
behavior on the bus.
New code accepts GPIO_DEFAULT flag so that it doesn't touch the
GPIO setting while configuring alternate functions. This should not
effect other boards unless the GPIO_DEFAULT is set on that board.
BUG=chrome-os-partner:24607
BRANCH=nyan
TEST=run on nyan rev 3.12. No "SPI rx bad data" at boot. UART and i2c good.
Change-Id: Id451cfae21e1d764452429dc5adfe1317ff5b140
Signed-off-by: Louis Yung-Chieh Lo <yjlou@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/181135
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Follow up Randall's CL 616e709. Note that the nyan warm reset is in
another CL.
BRANCH=nyan
BUG=chrome-os-partner:24558
TEST=See test procedure and results on comment #7 of issue 24558.
Note that the suspend tests cannot be done because my nyan cannot suspend.
Change-Id: I77c59cab177bc2c6fdf9bb8828937fc7b84e6d76
Signed-off-by: Louis Yung-Chieh Lo <yjlou@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/181177
Reviewed-by: Randall Spangler <rspangler@chromium.org>
So that Tegra wants to drive the PMIC_WARM_RESET_L low it will not be
fighting the EC.
BUG=None
BRANCH=None
TEST=Verified on the board rev 3.12
Change-Id: I5980a3ba096c152a4ccc28ad64e675c53b7cb337
Signed-off-by: Louis Yung-Chieh Lo <yjlou@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/180520
Reviewed-by: Randall Spangler <rspangler@chromium.org>
New boards (rev >= 2.2) are not affected since chipset_force_shutdown()
is called. On old boards the power rails of old boards are not removed
completely. This CL ensures the AP is warm-reset after EC is reset.
BUG=None
BRANCH=nyan
TEST=nVidia verified on old boards.
Change-Id: Ia2c2b243534d8a73b9b4d5320aad4664b1ac8b12
Signed-off-by: Louis Yung-Chieh Lo <yjlou@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/179521
Reviewed-by: Randall Spangler <rspangler@chromium.org>
On older boards (< Rev2.2), AP_RESET_L was connecting to PMIC reset pin.
However, after 2.2 we use the PMIC_THERM pin instead. Thus, change this
pin to pull high for old boards. T\Otherwise cannot boot up.
BUG=None
BRANCH=nyan
TEST=verified on old board by nvidia.
Change-Id: If4dccaf0bd0671c55b0d703d4d4b16a2b9c4f543
Signed-off-by: Louis Yung-Chieh Lo <yjlou@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/179377
Reviewed-by: Randall Spangler <rspangler@chromium.org>
This is the first step of tegra power state re-factoring. Move the
power button logic to common/power_button.c.
Also, the GPIO KB_PWR_ON_L is renamed to POWER_BUTTON_L.
BUG=None
BRANCH=nyan
TEST=tested on nyan rev 3.12,
reboot: PASS, power on 2
power off / power on: PASS, power on 5
lid close / power off / lid open: PASS, power on 3
button on / off: PASS, ending loop 3, power on 4
power off / button on: PASS, ending loop 4, power on 4
button off / power on: PASS, ending loop 3, power on 5
button off / lid open: PASS, ending loop 3, power on 3
Change-Id: If07806b9c11cdba2b478a9a74d2b75be1d9f7acf
Signed-off-by: Louis Yung-Chieh Lo <yjlou@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/179451
Add a new pin PMIC_THERM_L (PA1) since AP_RESET_L (PA15) is removed.
To force shutdown, drive PMIC_THERM_L to low (default high) for 32us.
Also rename set_pmic_pwrok() -> set_pmic_pwron(). And add a debounce time
for PMIC_PWRON_L pin.
BUG=chrome-os-partner:24206
BRANCH=nyan
TEST=Verified on the frank's rework board.
'power off' shutdowns the AP immediately.
'reboot' reboots the EC and resets the AP as well.
'sysjump RW' still keeps AP alive.
Change-Id: I8643e19081a824e1f6adc812dfad0269222db8ea
Signed-off-by: Louis Yung-Chieh Lo <yjlou@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/178631
Nyan EC supports 2 different boards: Venice2 and Norrin. Venice2
uses 2S battery, and Norrin uses 3S battery. This CL is to support
2 different battery types (2S or 3S) automatically at init time by
reading battery's MANUF_NAME, DEVICE_NAME and DESIGN_VOLTAGE from
Smart Battery Interface to determine which battery type to use.
To workaround the problem that battery may not be attached at init
time, a patch is added to call battery_get_info() in PWR_STATE_INIT
state to get the current battery info. Note the battery info is only
determined once.
BUG=none
BRANCH=nyan
TEST=tested on Vencie2 with 2S battery and on Norrin with 3S battery
attached at init time and made sure correct battery info are
installed;
tested on Venice2 and Norrin without battery at init time, then
attached 2S or 3S battery and made sure correct battery info are
installed.
Change-Id: I135909c7fe1e1dfdb0f706e0eadba6e904b6221e
Signed-off-by: Yen Lin <yelin@nvidia.com>
Reviewed-on: https://chromium-review.googlesource.com/178088
Reviewed-by: Randall Spangler <rspangler@chromium.org>
This allows boards to detect the battery and return the correct temp
ranges, which will be needed for upcoming boards.
In the board-specific implementations, it's pretty much just moving
the fields from one const struct to another, so the impact is minor.
BUG=chrome-os-partner:24310
BRANCH=none
TEST=build all platforms; verify pit and rambi still charge
Change-Id: I7be075b3abb4039577f6362316adc1860c121d5c
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/178424
Reviewed-by: Yung-chieh Lo <yjlou@chromium.org>
Reviewed-by: Rong Chang <rongchang@chromium.org>
The charge state machine asks for all of this stuff at the same time
anyway. Bundling it into a single function removes a number of
redundant (and painfully slow) I2C reads.
Also refactor the battery debug command so it doesn't have so many
local variables all in one function; it was consuming considerably
more stack space than any other debug command.
Spring still needs low-level access to the smart battery, so move the
two functions it needs directly into the Spring implementation.
BUG=chrome-os-partner:20881
BRANCH=none
TEST=charge/discharge rambi, pit and spring; watch debug messages and
LED and output of 'battery' debug command. All should behave the
same as before. Then run 'taskinfo' and see that the console task
has at least 20 bytes unused.
Change-Id: I951b569542e28bbbb58853d62b57b0aaaf183e3f
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/177797
If EC_BL_OVERRIDE is low, backlight will be turned off. To allow AP to
control backlight, set EC_BL_OVERRIDE to high.
BUG=none
BRANCH=nyan
TEST=verified on nyan board 2.0 to see backlight turns on when system
boots up
Change-Id: I04e6052fbef4b17c3f9566c8c5cf691a2710b7b0
Signed-off-by: Yen Lin <yelin@nvidia.com>
Reviewed-on: https://chromium-review.googlesource.com/177553
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Reviewed-by: Yung-chieh Lo <yjlou@chromium.org>
The XPSHOLD is not floated. It connects to +1.8V_VDDIO, which indicates
high when AP is on. So, bring it back.
Also remove the duplicated GPIO definition (GPIO_PWR_LED1).
Signed-off-by: Louis Yung-Chieh Lo <yjlou@chromium.org>
BUG=chrome-os-partner:23929
BRANCH=nyan
TEST=verified on nyan. successfully boot up the machine.
Change-Id: I293a899bcdf255f36f6117627f66ed8231c9a70f
Reviewed-on: https://chromium-review.googlesource.com/176046
Reviewed-by: Yen Lin <yelin@nvidia.com>
Reviewed-by: Yung-chieh Lo <yjlou@chromium.org>
Commit-Queue: Yung-chieh Lo <yjlou@chromium.org>
Tested-by: Yung-chieh Lo <yjlou@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Refine the GPIO list according to the schematic. Comment out the XPSHOLD in
power/tegra.c for compiling. Will fix later.
BUG=None
BRANCH=None
TEST=emerge-nyan chromeos-ec &&
make runtests -j 32 && make BOARD=nyan tests -j 32
Change-Id: Id0d682fd5d48e8a8a07785e86c07f45f07d866ab
Signed-off-by: Louis Yung-Chieh Lo <yjlou@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/175534
To conform to our mutating naming conventions, let's rename the
chip-specific PWM header file to have the string "_chip" in it.
BUG=chrome-os-partner:18343
BRANCH=none
TEST=build all platforms; pass unit tests
Change-Id: I6584be8e54fd24c8638559817e150c707bc0edb5
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/174884
Reviewed-by: Randall Spangler <rspangler@chromium.org>
This is tidier than every board defining its own module_id enum, and
encourages standard naming of modules.
A subsequent CL will do more cleanup (standardizing on MODULE_LED
instead of MODULE_POWER_LED and MODULE_LED_KIRBY), but it's easier to
do that as a separate CL than part of this one.
BUG=chrome-os-partner:18343
BRANCH=none
TEST=build all platforms; pass unit tests
Change-Id: If0fcef284fb3aa2fa145bc9ff3d1f3f2d25a2e47
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/174382
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Originally, the ARM boards printed the keyboard scan matrix whenever
it changed. This generated a lot of output, so we filtered that at
the console channel level. When we refactored the keyboard scan
module, that changed so that the scan matrix was not printed by
default, and the 'ksstate' debug command was used to enable printing
it. But on ARM boards, 'ksstate on' wouldn't do anything without ALSO
using 'chan -1' to turn the keyboard console channel back on. And
without the scan matrix printing by default, there's no reason to keep
the keyboard channel off by default.
BUG=chrome-os-partner:18343
BRANCH=none
TEST=build all boards
bang on keyboard on pit and don't see much debug output
ksstate on
now bang on keyboard and see matrix changes
Change-Id: I554b42e7582d507530cdecad7b35df71ca0e634f
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/174373
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Previously, it was really confusing whether I2C_PORT_HOST meant the
port where the EC was the master, or the port used to talk to the AP.
No functional changes, just a global find/replace and some tidying of
unused comments.
BUG=chrome-os-partner:18343
BRANCH=none
TEST=build all platforms; pass unit tests
Change-Id: Ia591ba4577d3399729556e0234ba0db3a0e3c5ea
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/174546
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Every chipset had its own header file just to declare a GPIO interrupt
handler. Since this seems to be a common feature of the power
interface, make a standard power_interrupt() API provided by
chipset.h. This lets us get rid of 4 include files, and makes it
easier to add more chipsets in the future.
BUG=chrome-os-partner:18343
BRANCH=none
TEST=build all boards; pass unit tests
Change-Id: I1fc5612d42625ea46e0a8e16a83085b66d476664
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/173745
The new boards will be populated with STM32L100RBT6,
so let's update the CHIP_VARIANT accordingly.
This is backward-compatible with the STM32L151RBT6 which is soldered on
older boards (it just doesn't use the full memory).
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BRANCH=none
BUG=none
TEST=boot the system on Nyan reworked with STM32L100RBT6
Change-Id: I73a4c587c7dc3646777166606e06f3dfaed2400c
Reviewed-on: https://chromium-review.googlesource.com/173633
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Reviewed-by: Vic Yang <victoryang@chromium.org>
Tested-by: Vincent Palatin <vpalatin@chromium.org>
Commit-Queue: Vincent Palatin <vpalatin@chromium.org>
Commit-Queue: David James <davidjames@chromium.org>
This is to add nyan board support:
- new files in board/nyan folder, including battery.c
- new common/chipset_tegra.c, which is mostly based on
chipset_gaia.c
- new include/tegra_power.h
- modified build.mk and flash_ec for nyan
BUG=none
BRANCH=nyan
TEST=tested on Venice 2 board
Change-Id: I36895f34f2f4d144a9440aff358c8274797ebbd6
Signed-off-by: Yen Lin <yelin@nvidia.com>
Reviewed-on: https://chromium-review.googlesource.com/168078
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
