And if RW B isn't enabled, it's not even linked.
BUG=chrome-os-partner:10881
TEST=on link, should be no B image, and 'sysjump B' should fail
On BDS, still should be A and B images
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Change-Id: Icb2af07881cc7e28b9b877f45824486a22fde8d7
Reviewed-on: https://gerrit.chromium.org/gerrit/26116
EC computes a SHA-256 hash of its RW code on boot. Also adds host and
console commands to tell the EC to recompute the hash, or hash a
different section of flash memory.
BUG=chrome-os-partner:10777
TEST=manual
1) ectool echash -> should match what the EC precomputed
2a) ectool echash recalc 0 0x10000 5
2b) on EC console, 'hash 0 0x10000 5'
2c) results should agree
3a) on ec console, 'hash 0 0x3e000' then quickly 'hash abort'
3b) ectool echash -> status should be unavailable
4) ectool echash start 0 0x3e000 6 && ectool echash && ectool echash abort && sleep 2 && ectool echash
status should be busy, then unavailable
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Change-Id: I6806d7b4d4dca3a74f476092551b4dba875d558e
Reviewed-on: https://gerrit.chromium.org/gerrit/26023
This returns true when both HW and SW write protect are enabled.
Once WP is enabled, sysjump will be locked out.
system_is_locked() can be used to gate other dangerous-ish commands too.
Signed-off-by: Randall Spangler <rspangler@chromium.org>
BUG=chrome-os-partner:7468
TEST=manual
sysinfo -> unlocked, copy A
sysjump B -> works
flashwp lock
reboot
(make sure flashinfo shows WP asserted and flash locked; note there is a
HW bug on proto1 which makes this flaky)
sysinfo -> locked, copy A
sysjump B -> fails
(remove WP screw)
reboot hard
flashwp unlock
Change-Id: I849b573675c2c1cb4c44b9a05d6973e38247ca23
Additional help messages and usage are gated by
CONFIG_CONSOLE_CMDHELP, so we can turn it on if there's space (adds
about 3KB to image size) and turn it off when there isn't.
Signed-off-by: Randall Spangler <rspangler@chromium.org>
BUG=none
TEST=manual
1) help
2) help list
3) help gpioset
4) gpioset -> wrong number of params
5) gpioset fred 0 -> param1 bad
6) gpioset cpu_prochot fred -> param2 bad
Change-Id: Ibe99f37212020f763ebe65a068e6aa83a809a370
This cleans up I2C init and debug commands across boards.
Signed-off-by: Randall Spangler <rspangler@chromium.org>
BUG=none
TEST=on link and bds:
i2cscan
lightbar run
powerbtn (to power on system)
temps (to read i2c temp sensors)
battery (to read battery)
charger (to read charger)
Change-Id: If3fb0cdb8d3178592bf68cbb2e72bc4b7f71dec5
This was used on the hybrid Badger-Lumpy systems for one-off testing.
It wouldn't necessarily work on a bare Badger board, and maintaining
it resulted in frequent build breaks.
Signed-off-by: Randall Spangler <rspangler@chromium.org>
BUG=none
TEST=build link, bds, daisy; boot link and bds
Change-Id: Ib64ccad9f38d76832ab57f7254dbf32f3d5e4a5e
And start wiring to x86_power so it can detect AC state changes
(needed to enable/disable turbo).
*YES*, this compiles for BDS/Daisy now...
Signed-off-by: Randall Spangler <rspangler@chromium.org>
BUG=chrome-os-partner:9069
TEST=plug/unplug AC power and look for "x86 AC on" / "x86 AC off" in debug log
Change-Id: I8399fab9637d6635a1c615f07448fd45b86bc25f
The recovery switch is the DOWN button.
BUG=none
TEST=manual
Install on BDS, open console.
Press the reset button, it should boot to firmware A.
Hold the DOWN button, press the reset button. It should stay in RO.
Change-Id: I82f72a56df463c7cc67bde7e09f3be1545c76129
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
BUG=chrome-os-partner:7459
TEST=manual
In the chroot:
cd src/platform/ec
make BOARD=link
The firmware image (build/link/ec.bin) is signed with dev-keys. Reflash the
EC and try it, and it should verify and reboot into RW A.
Additional tests (setting USE_RO_NORMAL, poking random values into VBLOCK_A
or FW_MAIN_A to force RW B to run, etc.) are left as an exercise for the
reader. I've done them and they work, though.
Change-Id: I29a23ea69aef02a11aebd4af3b043f6864723523
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
This saves ~70mw of power.
To make this work, I also had to stretch the power button signal to
give the system a chance to come back up when the user taps the power
button.
Signed-off-by: Randall Spangler <rspangler@chromium.org>
BUG=chrome-os-partner:9574
TEST=manual
For each of the following tests, wait ~15 sec after the system is
powered off to give it a chance to drop DPWROK.
1) tap power button -> system turns on
2) hold power button 1 sec -> system turns on
3) open lid -> system turns on
4) silego reset (power+refresh, or power+esc on proto1) -> system stays off
5) silego recovery (power+esc+refresh) -> system turns on
6) hold down power button and type 'reboot' on EC console -> system turns on
7) type 'powerbtn' on EC console -> system turns on
Change-Id: I781cf3e665104192521b7fb9ff75a3c3e7f43464
fix small modularity issues to ensure we are able to compile all boards
in "tests" configuration.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BUG=chrome-os-partner:8546
TEST=make BOARD=link tests && make BOARD=bds tests
make BOARD=daisy tests && make BOARD=adv tests && make BOARD=discovery tests
Change-Id: I9eed0195af6bfd3b47ef74e3cb27966c4365c345
This completes console output cleanup. The remaining calls to
uart_puts() and uart_printf() actually need to be that way.
Signed-off-by: Randall Spangler <rspangler@chromium.org>
BUG=chrome-os-partner:7464
TEST=manual
Change-Id: Ib1d6d370d30429017b3d11994894fece75fab6ea
Mainly add a typematic task that counts down the delay. Set the initial delay
in the keyboard_state_changed() when key pressed and clean it when released.
BUS=chrome-os-partner:8463
TEST=press on a particular key and screen shows that key is repeating.
Change-Id: Ic8432f8b38b514476588e0b7ad8fdc8a0b0c0b51
I need to clean up the console commands and provide the same functionality
via ectool, but this is a good starting point.
BUG=chrome-os-partner:7839
TEST=manual
Power up the CPU. The lights should blink.
Change-Id: Ic05a171d2b647551f1cfc7d6b2fd101088cac137
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Add nopll command to turn off the PLL, reducing the system clock to 16Mhz.
Signed-off-by: Randall Spangler <rspangler@chromium.org>
BUG=chrome-os-partner:8798
TEST=manual
boot system
press power button to boot x86
temps // should print all temperatures
timerinfo
timerinfo
timerinfo // convince yourself this is counting up at about 1MHz
nopll // this drops the system clock to 16MHz
temps // should still print all temperatures
timerinfo
timerinfo
timerinfo // should still be counting up at about 1MHz
Change-Id: Ie29ceb17af348148bffadf63d60c1b731f4c3f6d
De-assert the lightbar reset GPIO to be able to access its registers.
According to the HW guys, it will consume less power in standby than in
reset due the pull-up on the reset line.
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
BUG=None
TEST=manual
On Link proto-1, type "lightbar test" in the EC console and see it blink.
On BDS, just build it. Nothing actually changes for BDS.
Change-Id: I9ec612c80f48d41ccf779f0962fc047966d4b7ba
We moved a while ago to a table of ADC channels, so having a
meaningless constant defined in board.h is more harmful than helpful.
BUG=none
TEST=build link, bds
Change-Id: I651a609c9ed13f879bb943c90731275407d77e50
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Board-specific features like lightbar should be config'd at the board
level, not at the chip level.
BUG=none
TEST=build link, bds, daisy
Change-Id: If1df2ca0422f7b8bdc172d0df7bd9f6a1af6a9d2
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Group temperature sensors into different types so we only have to set
temperature threshold for each type instead of each sensor.
Signed-off-by: Vic Yang <victoryang@google.com>
BUG=chrome-os-partner:8466
TEST=Fan control still works.
Change-Id: I7acc714c32f282cec490b9e02d402ab91a53becf
Allow to build without the power button task.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BUG=None
TEST=make qemu-tests
Change-Id: Ibc757a6641f195f0d10e6a673792b996694f8cec
This works similar to SCI/SMI events, but triggers a separate
level-sensitive signal to the PCH instead.
Signed-off-by: Randall Spangler <rspangler@chromium.org>
BUG=chrome-os-partner:8514
TEST=manual
From EC console:
gpioget PCH_WAKEn --> should be 1
hostevent wake 0x1
close lid switch (with magnet)
hostevent -> should show wake mask 0x1, raw events 0x1
gpioget PCH_WAKEn --> should be 0
hostevent clear 0x1
hostevent -> should show raw events 0
gpioget PCH_WAKEn --> should be 1
Change-Id: I29832c1dc30239a98987578f07dfeb25791dde11
Make temp sensor report 0xfd when sensor is unpowered.
Also refactor power specification of temp sensors from thermal.c to
temp_sensor.c.
Signed-off-by: Vic Yang <victoryang@google.com>
BUG=chrome-os-partner:8279
TEST=none
Change-Id: Ib13813bdbac2f048fbc3b98fae5bbf104ebf37d7
Signed-off-by: Randall Spangler <rspangler@chromium.org>
BUG=chrome-os-partner:8325
TEST=manual
Boot system with lid open. 'ectool switches' should show lid open.
Use 'dut-control goog_rec_mode:on'. 'ectool switches should show
dedicated recovery signal on.'
Use 'dut-control goog_rec_mode:off'. 'ectool switches should show
dedicated recovery signal off.'
Disable write protect via screw. 'ectool switches' should show WP
signal disabled.
Boot system in recovery mode (power+esc+reload). Should show 0x09.
Change-Id: I0434427c4b5f8c07c02a8714618f7eb101b86fed
Signed-off-by: Randall Spangler <rspangler@chromium.org>
BUG=chrome-os-partner:8324
TEST=manual
1. When system is off, open lid. Debug console should show PB PCH pwrbtn activity.
2. Wait for system to boot.
3. Quickly close and open lid. Debug console should not show pwrbtn activity.
Change-Id: Ia018ff06a31ac2a68f20021d17e47ddb06096eb8
Add a task to update fan speed in LPC mapped memory once per second.
Also added read_mapped_mem16 and read_mapped_mem32.
Signed-off-by: Vic Yang <victoryang@chromium.org>
BUG=chrome-os-partner:8183
TEST="ectool pwmgetfanrpm" shows same result as "faninfo" from ec
console.
Change-Id: Ibc536acd39f836ffcad0bfa7c9c14e730220bd49
On bds, always send the keyboard scan code for the power button.
Signed-off-by: Randall Spangler <rspangler@chromium.org>
BUG=none
TEST=none
Change-Id: I56ad8c9dd67edfd54190d64f16742896a86b9ac1
A temperature polling task is added to achieve temporal correction and
also reduce the latency of reading temperature.
Factor out sensor specific part to keep code clean.
Signed-off-by: Vic Yang <victoryang@chromium.org>
BUG=chrome-os-partner:7801
TEST=On link, 'temps' shows all temperature readings.
Cover each sensor with hand and see object temperature rise.
Compilation succeeded on bds/adv/daisy/discovery.
Change-Id: I3c44c8b2e3ab2aa9ce640d3fc25e7fba56534b86
This CL attempts to abstract underlying bus from i8042 code. Nearly
all i8042 logic is isolated already. This patch is intended to allow
us to use i8042 logic for processing keys and commands on boards which
do not necessarily use LPC as the host <--> KBC bus interface.
This CL does the following:
- Define KBC bus <--> host (kbc_host_bus) on a per-board basis in
board.c.
- Add generic wrappers in place of lpc_keyboard_* in i8042 code.
- Define the behavior of generic wrappers in EC-specific keyboard
sources. If board.c specifies LPC, then send via LPC.
TODO: This needs to be tested on real hardware...
Signed-off-by: David Hendricks <dhendrix@chromium.org>
BUG=None
TEST=Locally compiled for Link, BDS and Discovery.
Change-Id: I9cabd514bd44fd6b508c26994eccc3011eedbc0f
BUG=chrome-os-partner:7839
TEST=none, work in progress
Change-Id: I20acde8db7f250227adcd4b9dc59328362e68720
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Remove id field from temp_sensor_t struct, since it's only used by the
console command (which already knows the id, because it's looping over
it).
Signed-off-by: Randall Spangler <rspangler@chromium.org>
BUG=none
TEST='temps'
Change-Id: I0970850073d644509cd5501d7ac4421c7373143b
Implement TMP006 object temperature calculation. Also add a console
command to calculate temperature with manually entered data.
BUG=chrome-os-partner:7801
TEST=In console, "tempremote 29715 -105000 6390" gives 285.00K.
Change-Id: I0f9193fb970fdc36566399e7083e73ab58965a85
Battery charging state machine contains many file changes.
This is the 1st part of the break down. Refactor original
test code into board dummy driver. Normalize charger API.
And import link's charger IC driver.
Signed-off-by: Rong Chang <rongchang@google.com>
BUG=chrome-os-partner:7855
TEST=build without warning and error
BOARD=bds make
BOARD=link make
BOARD=discovery make
Change-Id: I34b6e9862a45331378916bc77653d4adb22ca548
Refactor board/chip-specific code into corresponding directories.
Add support of the four I2C temp sensor in Link.
Use table lookup to handle different types of temperature sensors.
BUG=chrome-os-partner:7527
TEST=Correctly read EC internal temperature on bds.
Compile for link succeeded.
Change-Id: I694cfa54e1545798d877fafdf18c5585ab5f03e2
Refactor ADC code and move board/chip-specific part to corresponding
directories.
Implement function and console command to read Link charger current.
BUG=chrome-os-partner:7527
TEST=Read EC temperature and POT input on BDS.
Change-Id: I7fafd310ea49d9b2781f10c3453f5488da29a08a
You can now enable/disable tasks more easily.
To conditionally compile a C file depending on the task FOO activation,
just write something like that in the build.mk file :
common-$(CONFIG_TASK_FOO)+=foo_source.o
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BUG=None
TEST=make all BOARD=link && make qemu-tests
Change-Id: I760fb248e1599d13190ccd937a68ef47da17b510
Signed-off-by: Randall Spangler <rspangler@chromium.org>
BUG=chrome-os-partner:7697
TEST=if it runs, it works
Change-Id: I36ab37a8cf1c3e4bf41bfb38e622e766cee8a4c4
Implement TPS2543 USB charging control.
It contains routine for setting each USB port as dedicated charging port
or standard downstream port. To allow us controlling the current
distributed to each port, we can select whether to allow 500mA or 1500mA
for each port.
BUG=chrome-os-partner:7476
TEST=Added USB port definition for BDS and tested GPIO output voltage
level is correct for all modes.
Change-Id: I19bc4b30d333aa802f868ebfc3a398b30e99ba0f
Signed-off-by: Randall Spangler <rspangler@chromium.org>
BUG=chrome-os-partner:7456
TEST=if it runs, it works
Change-Id: Ib82afab7d53203af31eefc9887feb98679266ac1
For bringup, this powers on the x86 unconditionally.
Signed-off-by: Randall Spangler <rspangler@chromium.org>
BUG=chrome-os-partner:7528
TEST=none
Change-Id: Ib23e56d38ab42f8d8a4dbd1ba9dce12f0c3eeec9
This just ensures the JTAG pins are reset to JTAG function on warm reboot.
Signed-off-by: Randall Spangler <rspangler@chromium.org>
BUG=chrome-os-partner:7448
TEST=none
Change-Id: I0cccdbe7a68c228db7f354898ed30598e9fabff0
