This module controls the inductive charging transmitter. For now, the
policy is to charge whenever possible.
BUG=chrome-os-partner:31392
TEST=Unit test passed
BRANCH=None
Change-Id: Ie48a38ad92fe2bc3329c4962e96572f2bc40b4e6
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/212715
This CL ensures that temporary "one-shot" sequences such as KONAMI, TEST,
TAP, etc. will revert to the previous "normal" sequences even when
interrupted by other one-shot sequences.
This also adds a test for those cases.
BUG=chrome-os-partner:29873
BRANCH=ToT
TEST=manual
make runtests
Change-Id: Ie83908731acdf2f7c9108568a1ba047943175d26
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/213230
Add back the test but only enable USB PD tasks for usb_pd test. This
should ensure that we do not break existing tests.
BUG=chrome-os-partner:31200,chromium:402335
TEST=make buildall
BRANCH=None
Change-Id: I4daa41a96a1067362b2c40a2a09fce733843bdff
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/211923
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Initial commit of usb_pd unit test. The test cases are very simple.
We'll add more test cases in similar format.
BUG=chrome-os-partner:31200
TEST=Pass usb_pd test
BRANCH=None
Change-Id: I9e3de5b2c032ee1d3670cde6d8227ce0378ae8a0
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/211643
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
When emerging chromeos-ec for ryu the build blows up when doing
tests. Remove all tests for RYU so that we can start building the
EC code through the build system.
BUG=chrome-os-partner:30659
BRANCH=None
TEST=Can emerge-rush_ryu chromeos-ec
Change-Id: I293f2640891f42cfea0eb8aeb1ff1de603db9a93
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/208063
Reviewed-by: Vic Yang <victoryang@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
This is a complete rewrite of the charge_state task used by x86 platforms.
Rather than having a bunch of state-specific functions, each with their own
error handling and special cases, this is organized like so:
Forever:
1. Read everything we can from the battery and charger.
2. Figure out what we'd like to do (including error handling).
3. Allow for customization to override that.
4. Do it.
Things I need to file bugs for are marked with "TODO(wfrichar)". I'll file
the bugs after this CL goes in, so that they'll have something relevant to
refer to.
BUG=chrome-os-partner:20881
BRANCH=ToT
TEST=manual
make buildall -j
Try it on Samus, watch it charge from nearly empty to full, both with and
without fastcharge enabled.
Also undefine CONFIG_BATTERY_PRESENT_CUSTOM, plug and unplug the battery to
be sure the trickle charging logic is correct when it can't tell if the
battery is present.
Change-Id: I3935cd3b87f322eb52178f8a675a886c16b75d58
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/191767
Reviewed-by: Randall Spangler <rspangler@chromium.org>
This adds golden wake count for each task and check at the end of the
test. The golden wake count is calculated with the seeds and the pseudo
random number generator.
BUG=chrome-os-partner:23800
TEST=Pass the test
BRANCH=None
Change-Id: I7e90336b3f0b0355795ada7baf7c052a047ee302
Signed-off-by: Vic (Chun-Ju) Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/181734
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
This provides us a way to inject interrupts during a test. If a test has
interrupt_generator() defined, it will run in a separate thread. The
generator can then trigger interrupts when it decides to. The current
running task is suspended while emulator is executing ISR.
Also fixes a bug that tasks run without scheduler notifying them during
emulator start-up.
BUG=chrome-os-partner:19235
TEST=Repeatedly run all tests.
BRANCH=None
Change-Id: I0f921c47c0f848a9626da6272d9040e2b7c5ac86
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/55671
Currently, per-board defines use mixed case (BOARD_pit). This causes
the presubmit script to complain because that's a style violation.
Using --no-verify to bypass that also allows other style violations to
creep in.
This change adds uppercase variants (BOARD_PIT). It also adds a CORE_
define with '-' changed to '_', since CORE_cortex-m isn't a valid
symbol but CORE_CORTEX_M is (so now we can #ifdef CORE_CORTEX_M).
This does not remove the old mixed-case defines yet, nor does it
find/replace them in the C source files. This is intentional, so this
change can be cherry-picked into branches without needing to change
files in the branch that may have picked up new #ifdefs.
I will rename the constants in the C source files and remove the old
mixed-case defines in a follow-on CL, which should not need to get
picked into existing branches.
BUG=chromium:322144
BRANCH=none (but might need it if you later cherry-pick something with
an uppercase #ifdef BOARD_FOO
TEST=Build each board with V=1 option: 'make V=1 BOARD=foo all tests'.
Check that the compile command line has both mixed-case and
uppercase defines. Check that per-board tests from test/build.mk
were built (for example, BOARD_PIT should compile kb_scan and
stress, and BOARD_SAMUS should build none of them).
Change-Id: I5eb0d1fe57f1c694d7449e5f148e2f13fb290a39
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/179205
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
These boards are unloved and unsupported. They'll never grow up to be
laptops, and hardware is increasingly hard to come by.
Comparable functionality is available in the other, more-loved boards.
Removing these boards speeds up util/make_all.sh by 40%. (If you're
not running that before every upload, you should be...)
BUG=chrome-os-partner:24062
BRANCH=none
TEST=build all remaining platforms and pass unit tests
Change-Id: I4d8a49e4d52d7393471f1b1cbef059c8db4a4f77
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/177373
QEMU tests served us well, but it has been more and more difficult to
maintain as we now have more chips and use more functionality from each
EC chip. With emulator tests in place to test common code and hardware
test to test per-chip/per-board drivers, it's time to remove QEMU tests
to simplify our code base.
QEMU tests that are covered by other emulator tests are removed
completely; tests that are not covered are left alone for now to
preserve the test logic.
BUG=chrome-os-partner:18343
TEST=util/make_all.sh
BRANCH=None
Change-Id: I5a4dd2f5ac42f7f66f86fdce0b62dbd2c65bf66a
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/174669
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Basic tests are actually working for most LM4-based boards. Let's
re-enable them except for Bolt and Samus. These two boards have
board-specific chipset code, which fails test compilation.
BUG=chrome-os-partner:18598
TEST=Run affected tests on Link
TEST=util/make_all.sh
TEST='make tests' for all board
BRANCH=None
Change-Id: I46bc39c14ec43ccc29e9b0c46f349cac2755e684
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/172982
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Reviewed-by: Jeremy Thorpe <jeremyt@chromium.org>
The LED state machine ends up being very board-specific, as does the
specific configuration of LEDs and whether they're PWM'd or just
GPIOs. dparker has some clever ideas for how to move more of the
functionality to common/led_common.c (used at present only by peppy);
that will be done as a follow-on to this CL.
There's a unit test for the spring LED implementation. To keep that
compiling, just use a symlink to the spring-specific implementation.
No code changes; just moving around files.
BUG=chrome-os-partner:18343
BRANCH=none
TEST=build all boards; pass unit tests
Change-Id: I5973e701a29a72575db9a161dc146855ab21cca6
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/171771
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
This just does a copy/rename from Bolt. Tweaking for Samus' peculiarities
will come next.
BUG=chrome-os-partner:22870
BRANCH=none
TEST=manual
The only thing we can check is that it compiles:
cd src/platform/ec
make BOARD=samus
Change-Id: Ied95ebdd1137548b21334b4a65a298c68482c517
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/171081
Reviewed-by: Randall Spangler <rspangler@chromium.org>
The old backlight_x86 code did
(backlight enable) = (lid is open) && (GPIO request from AP)
Newer systems will AND those signals in hardware. Support those
systems by separating CONFIG_BACKLIGHT_LID and
CONFIG_BACKLIGHT_REQ_GPIO, and add tests for the case where the enable
signal is dependent only on the lid position.
BUG=chrome-os-partner:22960
BRANCH=none
TEST=pass unit tests
Change-Id: I1909426e49f00a8acd5047fd88c801cba1dacd76
Reviewed-on: https://chromium-review.googlesource.com/170925
Tested-by: Randall Spangler <rspangler@chromium.org>
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Commit-Queue: Randall Spangler <rspangler@chromium.org>
This checks x86 backlight passthrough by toggling lid switch and PCH
backlight output, and also by host command.
Also fix a bug that backlight switch host command can never be invoked
due to incorrect version mask.
BUG=chrome-os-partner:19236
TEST=util/make_all.sh
BRANCH=None (unless some platform needs backlight switch host command)
Change-Id: Iefc5f4b7387c4d2aa43059d073bd70aed879fe34
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/170758
Reviewed-by: Randall Spangler <rspangler@chromium.org>
This adds a test for LP5562 LED control. The test mocks charging and
battery status and check LED behavior is as expected.
BUG=chrome-os-partner:19236
TEST=Pass the new test
BRANCH=None
Change-Id: Iac6b538b24c555bf48b6824f880091cd11a585d4
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/170597
Reviewed-by: Randall Spangler <rspangler@chromium.org>
This moves the mock function from common layer down to physical layer to
complete the test of common layer.
Also disable flash test for hardware tests, as this is only testing
common layer.
BUG=chrome-os-partner:19236
TEST=util/make_all.sh
BRANCH=None
Change-Id: Idd1c2c44591952894486f84d428872cfbf2cfdad
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/170297
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Depending on the system, the AP can be throttled in at least two different
ways - politely, where it's just asked to slow down a bit, and forcefully
using a hardware signal (like PROCHOT). In addition, the request for
throttling can come from multiple tasks.
This CL provides a single interface, specifying both the type of throttling
desired and the source of the throttling request.
For each type, any source can can start throttling, but all sources must
agree before it stops. The changes are protected by a mutex, so that
requests from multiple tasks don't interfere with each other.
BUG=chrome-os-partner:20739,chromium:287985,chromium:287983
BRANCH=ToT
TEST=manual
Build-time test:
cd src/platform/ec
make BOARD=falco runtests
Run-time test: Lower the temp thresholds, turn the fan off, and watch the
throttling turn off and on as things heat up. For example, on the EC
console:
> temps
PECI : 339 K = 66 C
ECInternal : 324 K = 51 C
G781Internal : 328 K = 55 C
G781External : 327 K = 54 C
> thermalset 0 341 343
sensor warn high halt fan_off fan_max name
0 341 343 383 333 363 PECI
1 0 0 0 0 0 ECInternal
2 0 0 0 0 0 G781Internal
3 0 0 0 0 0 G781External
>
> temps
PECI : 339 K = 66 C
ECInternal : 324 K = 51 C
G781Internal : 328 K = 55 C
G781External : 327 K = 54 C
>
> fanduty 0
Setting fan duty cycle to 0%
>
> apthrottle
AP throttling type 0 is off (0x00000000)
AP throttling type 1 is off (0x00000000)
>
[430.152000 thermal WARN]
[430.152233 event set 0x00020000]
[430.152497 event clear 0x00020000]
[430.152714 ACPI query = 18]
[430.152444 sci 0x00020000]
[430.153051 set AP throttling type 0 to on (0x00000001)]
> gpioget CPU_PROCHOT
0 CPU_PROCHOT
>
[436.153742 thermal HIGH]
[436.153979 set AP throttling type 1 to on (0x00000001)]
> gpioget CPU_PROCHOT
1* CPU_PROCHOT
> [441.155319 thermal no longer high]
[441.155587 set AP throttling type 1 to off (0x00000000)]
[442.155604 thermal HIGH]
[442.155841 set AP throttling type 1 to on (0x00000001)]
[446.156623 thermal no longer high]
[446.156890 set AP throttling type 1 to off (0x00000000)]
temps
PECI : 343 K = 70 C
ECInternal : 324 K = 51 C
G781Internal : 328 K = 55 C
G781External : 327 K = 54 C
>
[447.156827 thermal HIGH]
[447.157064 set AP throttling type 1 to on (0x00000001)]
apthrottle
AP throttling type 0 is on (0x00000001)
AP throttling type 1 is on (0x00000001)
> gpioget CPU_PROCHOT
1 CPU_PROCHOT
>
Now turn the fan back on:
> fanauto
>
[456.159306 thermal no longer high]
[456.159574 set AP throttling type 1 to off (0x00000000)]
> apthrottle
AP throttling type 0 is on (0x00000001)
AP throttling type 1 is off (0x00000000)
> temps
PECI : 341 K = 68 C
ECInternal : 324 K = 51 C
G781Internal : 328 K = 55 C
G781External : 327 K = 54 C
>
[473.163905 thermal no longer warn]
[473.164168 event set 0x00040000]
[473.164453 event clear 0x00040000]
[473.164670 ACPI query = 19]
[473.164379 sci 0x00040000]
[473.164987 set AP throttling type 0 to off (0x00000000)]
temps
PECI : 340 K = 67 C
ECInternal : 324 K = 51 C
G781Internal : 328 K = 55 C
G781External : 327 K = 54 C
>
> apthrottle
AP throttling type 0 is off (0x00000000)
AP throttling type 1 is off (0x00000000)
>
Change-Id: I9ee1491a637d7766395c71e57483fbd9177ea554
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/168802
When running an unit test, the emulator is sitting in idle task for most
of the time. Since we don't have interrupt support now, the emulator is
just waiting for the next wake-up timer to fire. To save time, we can
actually just figure out which task is the next to wake up, and then
fast-forward the system clock to that time.
With this, all tests run faster and we can remove time-scaling for all
current tests. This improves not only run time but also stability.
If one day we have interrupt support, then we will have to modify this
to take into account the fact that an interrupt might wake a task before
any wake-up timer fires.
BUG=chrome-os-partner:19235
TEST=Run all tests in parallel for 1000 times.
BRANCH=None
Change-Id: I4cd33b041230267c110af015d425dd78d124f963
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/167801
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
This includes:
- Charge mode control host command
- Low battery shutdown/hibernate
Also, speed up the test by 20x since we now need to wait for more than
30 seconds for low battery state test.
BUG=chrome-os-partner:19236
TEST=Pass the test
BRANCH=None
Change-Id: If2e91a33f3a80f58da01a6c3da128cb603101dea
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/167613
Reviewed-by: Rong Chang <rongchang@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Firmware development for this board is happening on the
firmware-wolf-4389.24.B branch.
BUG=chrome-os-partner:21815
BRANCH=None
TEST=Run util/make_all.sh. Verify all is made.
Change-Id: I4b58a982a87562231453f3f201024b809c6a24fb
Signed-off-by: Dave Parker <dparker@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/65514
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Some chargers can run in a "turbo" mode, which lets it draw from the battery
to provide extra power to the AP in short bursts. In order for this to work
properly, the EC has to watch the current closely to make sure specific
limits are observed. It also has to recognize specific adapters, since those
limits vary depending on the rated power that the adapter can provide.
This adds the basic functionality, plus a test for it.
BUG=chrome-os-partner:20739
BRANCH=falco,peppy
TEST=manual
make BOARD=${BOARD} runtests
On Falco, you can also use the "adapter" EC command to see what's going on.
Try replacing the adapters and running that command to be sure they're
correctly identified, too:
> adapter
Adapter 65W (590mv), turbo 1, AP_throttled 0
>
We currently support 45W, 65W, and 90W adapters. Unknown adapters are
treated as 65W, but don't enable turbo mode.
Change-Id: I7e5407db825ce7e596cb495fb8cb4d1dd1ff639c
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/63372
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
This change moves vendor specific temperature ranges to battery pack
files or board setup files. And added a host test case to verify that
does not change x86 smart battery charging state machine behavior.
BUG=chrome-os-partner:21181
BRANCH=None
TEST=manual
build test: util/ecmakeall.sh
hosttests: make hosttests && make runtests
Change-Id: I48e76826b5555f64b78e3c063ce5f02416c72aa2
Signed-off-by: Rong Chang <rongchang@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/62978
Reviewed-by: Vic Yang <victoryang@chromium.org>
The preliminary bolt support allows the board to boot
with all the necessary peripherals working except for the
following things:
- Not all board temp sensors are added.
- WLAN is not powered on because of inrush issues.
- USB power chargers are fixed to normal mode for now.
BUG=chrome-os-partner:20372
BRANCH=None
TEST=Built and booted
Change-Id: Iea7a39e812bb396e5731f212630b7fe97c164bf2
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/62210
Reviewed-by: Randall Spangler <rspangler@chromium.org>
This tests host event and hook are triggered when AC status changes.
BUG=chrome-os-partner:19236
TEST=Pass the test.
BRANCH=None
Change-Id: I9e4263f3f6e273bfb0b24671a4e5c56b20a04e1a
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/61554
Reviewed-by: Randall Spangler <rspangler@chromium.org>
This change copies the slippy board configuration as a starting
point for peppy. This change is essentially the same as
https://gerrit.chromium.org/gerrit/55820
BUG=chrome-os-partner:19640
BRANCH=none
TEST=manual
Tested on slippy as there are no peppy-specific changes yet.
cros_workon --board peppy start chromeos-ec
emerge-peppy chromeos-ec
~/trunk/src/platform/ec/util/flash_ec --board peppy
Signed-off-by: Dave Parker <dparker@chromium.org>
Change-Id: I4c5f7a77fa55a6364effe838f7a656d56bfad9fb
Reviewed-on: https://gerrit.chromium.org/gerrit/56332
Reviewed-by: Olof Johansson <olofj@chromium.org>
Commit-Queue: Dave Parker <dparker@chromium.org>
Tested-by: Dave Parker <dparker@chromium.org>
This change just copies slippy and tweaks a few things that were
slippy-specific instead of not-link-specific (there are still bugs
open for those things).
BUG=chrome-os-partner:18788
BRANCH=none
TEST=manual
Since there are no Falco-specific changes yet (just slippy with another
name), I can try it on Slippy:
cros_workon --board falco start chromeos-ec
emerge-falco chromeos-ec
~/trunk/src/platform/ec/util/flash_ec --board falco
I also built and tested Link EC, to make sure nothing broke there either.
Change-Id: I9b3682032bd51adab4450520dfe52e3036750ef9
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/55820
Reviewed-by: Randall Spangler <rspangler@chromium.org>
This is the first version of pthread-based RTOS emulator. With this, we
will be able to test high-level modules entirely on the host machine.
BUG=chrome-os-partner:19325
TEST='make runtests' and see tests passing.
BRANCH=None
Change-Id: I1f5fcd76aa84bdb46c7d35c5e60ae5d92fd3a319
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/49954
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
A test that check keyboard MKBP module using keyboard scanning module and
host commands.
BUG=chrome-os-partner:19236
TEST=Pass the test
BRANCH=None
Change-Id: Ic22a2c8f3069d8e72c1222882073d428b733bca3
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/50132
Some tests are not applicable to all boards. This change makes test-list
a per-board parameter so a test can be enabled/disabled for individual
boards. Also disable all the tests that don't compile now.
BUG=chrome-os-partner:18598
TEST=make tests for all boards
BRANCH=None
Change-Id: Id2d18e23856f5c64dbdc7c6ca5949f8ad61b5cc0
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/49452
We are moving to a per-function mock mechanism, which is less likely to
break when someone adds a function to a file with a mock.
BUG=chrome-os-partner:18598
TEST=None
BRANCH=None
Change-Id: Ie625064730d2224accbaf1febbdc4750e793d047
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/49451
