Adds min_frequency and max_frequency to struct motion_sensor_t.
New attributes min_frequency and max_frequency are now returned in
ectool's MOTIONSENSE_CMD_INFO response.
Incremented ectool's MOTIONSENSE_CMD_INFO version to version 3.
Add constants for MIN_FREQUENCY and MAX_FREQUENCY to each sensor's
header file.
BRANCH=none
BUG=chromium:615059
TEST=build/boot and verify MOTIONSENSE_CMD_INFO response on kevin,
make buildall -j passes.
Change-Id: I66db9715c122ef6bb4665ad5d086a9ecc9c7c93a
Signed-off-by: Nick Vaccaro <nvaccaro@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/482703
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
This patch declares recovery_buttons array, where each board
lists recovery buttons. Pressing those while the board reboots
makes the system enter recovery mode.
BUG=none
BRANCH=none
TEST=buildall
Change-Id: I1f204156efbd6d2a507d67ba90f75ce857b03559
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/486944
Allow EC to take Lid Accelerometer readings in S0 to support rotation,
but disable taking Gyro readings unless requested by AP.
Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
BRANCH=none
BUG=b:36668539
TEST=in ec console: accelinfo on
=> confirm Lid Accel values are non-zero
=> confirm Gyro values are zero
Change-Id: Ie0bf466a5877cf8d20fb3d5cd223696fbdc9c271
Reviewed-on: https://chromium-review.googlesource.com/484140
Commit-Ready: Daniel Kurtz <djkurtz@chromium.org>
Tested-by: Daniel Kurtz <djkurtz@chromium.org>
Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
Rowan uses BMI160 as g-sensor and gyro sensor.
This change removes KX022 settings and adds BMI160 settings.
The LID_ANGLE config is also removed.
BRANCH=none
BUG=chrome-os-partner:62673
TEST=check the values of the sensors are correct:
run ectool motionsense while the machine is flat on the table, raised on
its left side and raised on its front edge. With these 3 measurements
the accel data along the Z, X and Y axis are showing + 1G.
Change-Id: I03c84f143bbfc3037fd5232398d15e9c2a511291
Signed-off-by: Yidi Lin <yidi.lin@mediatek.com>
Reviewed-on: https://chromium-review.googlesource.com/427566
Commit-Ready: Rong Chang <rongchang@chromium.org>
Tested-by: Rong Chang <rongchang@chromium.org>
Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-by: Rong Chang <rongchang@chromium.org>
Enable more hardware related console commands to help hardware
validation.
BUG=chrome-os-partner:62673
TEST=manual
build and load into Rowan
check console commands:
gpioget
spixfer
BRANCH=none
Change-Id: I86d3b74cef77ed9244a140290241a9fac6af3f84
Signed-off-by: Rong Chang <rongchang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/441486
Reviewed-by: Nicolas Boichat <drinkcat@chromium.org>
EC controls SPI CS pin as GPIO. This CL remove the ALT function
config. And before trigger SPI hardware reset, the driver state needs to
be disable.
BUG=chrome-os-partner:62673
TEST=manual
load into Rowan and boot up AP.
check console command accelread
BRANCH=none
Change-Id: I511c5906efbbb42b09547c61414bcc24b0217ad3
Signed-off-by: Rong Chang <rongchang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/441485
Reviewed-by: Nicolas Boichat <drinkcat@chromium.org>
