With introduction of encryption it is becoming impossible to read
NVMEM contents directly from flash. Decrypting the contents each time
there is a read request creates a significant performance hit. NVMEM
needs to be rearchitecture such that there is no need to run
decryption each time NVMEM read is performed.
This patch does just that, implementation details are described in the
header comment in common/nvmem.c.
To reduce memory impact the size of NVMEM is being decreased from 16K
to 12K. This is acceptable because eviction objects stored in NVMEM
serialized now, which dramatically reduces NVMEM size requirements.
The TPM2 NVMEM size definition must be kept in sync.
Another optimization this change introduces is bypassing writing into
the flash if NVMEM contents did not change, which is verified by
examining the hash of the cached storage.
A test is added to verify that the new commit scheme works as
expected, and the nvmem test is re-introduced to the list of test ran
on each 'make buildall'.
CQ-DEPEND=CL:433839
BRANCH=none
BUG=chrome-os-partner:62260,chrome-os-partner:62421
BUG=chrome-os-partner:62437
TEST=ran the following tests, all succeeded
make buildall -j
TEST_LIST_HOST=nvmem make runtests
tcg test suite
corp enroll on reef, reboot a few times, verify that enrollment sticks
Change-Id: I177daa3ceb4fd7aac299ca26b4506b863e31b946
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/433184
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
- Modified src attach state to enable vbus when debug accessory is
detected.
- servo_v4 has two pd ports, but each port requires a different default
power role. Port 0 can only ever be a SNK, but port 1 which acts is
intended to be a DTS port should default to a SRC so it can be be a
source debug accessory. It may also act as a sink debug accessory, but
is not intended to toggle automatically but will swap roles if
necessary via pd role swap messaging.
- Add hook for ccd enable/disable for DTS mode
BUG=chrome-os-partner:61878
BRANCH=servo
TEST=Manual Verfied that can still build servo_v4 project. All changes
in this CL are contingent on config option CONFIG_USB_PD_DTS being enabled.
Change-Id: Iab968b6fbdfc8f2d155c4f8618921b32f313b9ec
Signed-off-by: Scott <scollyer@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/428308
Commit-Ready: Scott Collyer <scollyer@chromium.org>
Tested-by: Scott Collyer <scollyer@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
In Sink mode, on the receipt of a GotoMin message,
reduce the current consumption to some minimum level.
BUG=chrome-os-partner:33688
TEST=Manual testing
Used a Kevin, with test routine, to test GotoMin feature
on another Kevin unit.
Test routine:
if (!strcasecmp(argv[2], "gm")) {
ccprintf("send goto min\n");
send_control(port, PD_CTRL_GOTO_MIN);
send_control(port, PD_CTRL_PS_RDY);
}
Kevin with GotoMin feature:
# ectool usbpdpower 0
Port 0: SNK DRP PD 4277mV / 3000mA, max 5000mV / 3000mA / 15000mW
Port 1: Disconnected
After Test routine is executed:
# ectool usbpdpower 0
Port 0: SNK DRP PD 4906mV / 500mA, max 5000mV / 500mA / 2500mW
Port 1: Disconnected
BRANCH=none
Change-Id: Iaac6e19706ceb10ccaff4d602d63fc086c808c8f
Reviewed-on: https://chromium-review.googlesource.com/425728
Commit-Ready: Sam Hurst <shurst@google.com>
Tested-by: Sam Hurst <shurst@google.com>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Servo_v4 requires the ability to have a different default state per
port. In previous devices, the assumption was that each supported port
had the same default usb pd state and power role. This CL moves the
by the default power role which in turn is derived from
CONFIG_USB_PD_DUAL_ROLE. In addiiton to moving the location, it now
uses 'port' as argument so it can be port specific if required.
PD_DEFAULT_STATE was a board.h specific config, but in practice each
instance used to date was set to PD_STATE_SNK_DISCONNECTED if
CONFIG_USB_PD_DUAL_ROLE was defined and set to
PD_STATE_SRC_DISCONNECTED otherwise.
BUG=chrome-os-partner:61878
BRANCH=servo
TEST=Manual run 'make -j buildall' to verify that all instances of
PD_DEFAULT_STATE were removed.
Change-Id: Iaf40718668732f525485ed7942ee7fc246d3f75d
Signed-off-by: Scott <scollyer@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/431787
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
(From CL 431233)
Limit battery charge voltage to prevent battery over-charge, due to
regulation inaccuracy. Since RO FW may charge > 8656 mV, ensure the
battery is not full before charging.
BUG=chrome-os-partner:61906
BRANCH=none
TEST=Manual on Electro, sysjump with battery @ 99%, verify battery
discharges, then re-charges to 100%, before discharging once again.
Change-Id: I28212c83057a442fd75e39f8ad51927a7a1f2817
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/432857
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This patch makes incompatible changes to the nvmem layout: the header
is increased to accommodate a 16 byte sha ans a 16 byte padding for
future extensions.
The layout version field is also introduced to make it easier to track
changes in the future. When calculating SHA the entire partition above
the SHA field is processed. Encryption covers everything above the
header.
Introducing encryption makes it impossible to use flash contents
directly for read and compare operations.
The nvmem_setup function is modified to use the nvnem_save() instead
of writing into the flash directly.
BRANCH=none
BUG=chrome-os-partner:62260
TEST=ran the following tests, all succeeded
make buildall -j
TEST_LIST_HOST=nvmem make runtests
tcg test suite
corp enroll on reef, reboot a few times, verify that enrollment sticks
Change-Id: I50b148ac0dc6bc924f4d65c67bc6610100d9dfc0
Reviewed-on: https://chromium-review.googlesource.com/428691
Commit-Ready: Vadim Bendebury <vbendeb@chromium.org>
Tested-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
On boards based on the g chip cryptographic functions come from
hardware, they should be implemented in chip/g as opposed to a
particular board.
The common modules (like nvmem) should be using some generic API,
which hopefully will be implemented by other chips, or could be
replaced by a purely software implementation where crypto hardware
support is not available.
Crypto API definition is being added in include/ and the g chip
implementation (a wrapper around dcrypto functions) is being added in
chip/g.
test/nvmem_vars.h needed to be edited to avoid conflict with
<string.h>.
BRANCH=none
BUG=chrome-os-partner:62260
TEST=make buildall -j still passes. Booting reef with the new image
works fine too.
Change-Id: Ifef281215f89239966882ecbe3e90c8351b9b91a
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/431313
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Reviewed-by: Nagendra Modadugu <ngm@google.com>
With upcoming versioning of NVMEM contents let's replace term
'version' with term 'generation' in the existing nvmem implementation.
Generation would allow to tell between two instances of NVMEM stored
in flash memory. The upcoming version field in the header will be used
to tell between different nvmem layouts.
This patch was created by invoking the following command:
sed -i 's/VERSION/GENERATION/g;s/version/generation/g' \
common/nvmem.c include/nvmem.h test/nvmem.c
and then editing a few remaining capitalized instances.
This also fixes nvmem test broken by an earlier patch.
BRANCH=none
BUG=chrome-os-partner:62260
TEST=the following tests succeed:
make buildall -j
TEST_LIST_HOST=nvmem make runtests
booitng reef with cr50
Change-Id: I96e52dc93ca7c52c55794ba3e8c2774571212de0
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/431312
Reviewed-by: Scott Collyer <scollyer@chromium.org>
Each device keeps track of the last known state. If device_set_state
updates the device state to a new known state, then return true. Cr50
uses this returned value to check if the state has changed instead of
calculating it itself.
BUG=none
BRANCH=none
TEST=device detection still works
Change-Id: I8afac178c2c731def6f4f62ff7023fe169ec1479
Signed-off-by: Mary Ruthven <mruthven@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/430970
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Add a config option that can be used by chipset to provide PMIC reset
using LDO_EN. This is required for ensuring that the AP is power
cycled properly. Implement the special pmic reset for skylake
chipsets.
BUG=chrome-os-partner:61883
BRANCH=None
TEST=Verified that reboot on EC console resets the AP and does not get
stuck in G3 on poppy.
Change-Id: I5f680fede5cb4effa86243f51edfdea09db4d975
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/431192
Reviewed-by: Duncan Laurie <dlaurie@google.com>
Specifically, we are using a bit to disable the
SMI pulse on x86 systems so that we can use the
power button for menu selection.
BUG=chrome-os-partner:61275
BRANCH=None
TEST=Try running with depthcharge sending the host command
during detachable FW menus and making sure power
button select doesn't turn off device on reef.
Change-Id: I4a68cf514d514a4abe98beb99e7934d6fb0f44bd
Signed-off-by: Shelley Chen <shchen@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/427413
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
A valid charge port is always detected as VBUS supplier type, 'USB charger'
can detect the same port as BC1.2 DCP supplier type & also 'TCPC' can
detect the same port as TYPEC supplier type. Thus a valid port is detected
as 2 or 3 supplier types. Depending on the supplier's priority and the
power that the supplier can provide, charge manager choses the charge
supplier type of the port.
If the USB charger detected supplier is BC1.2 DCP and the TCPC detected
supplier is TYPEC then the supplier can provide stable current from TYPEC
supplier's advertised current hence start ramping from TYPEC supplier's
advertised current.
BUG=chrome-os-partner:61420
BRANCH=none
TEST=Manually tested on reef. Donette bottom port can switch
from 1.5A to 3A upon high load.
Change-Id: I871eca3ae4041f00bb3fd50e6aa939643f30a1f2
Signed-off-by: Vijay Hiremath <vijay.p.hiremath@intel.com>
Reviewed-on: https://chromium-review.googlesource.com/427961
Commit-Ready: Vijay P Hiremath <vijay.p.hiremath@intel.com>
Tested-by: Vijay P Hiremath <vijay.p.hiremath@intel.com>
Reviewed-by: Shawn N <shawnn@chromium.org>
BRANCH=reef
BUG=chrome-os-partner:61849
TEST=1. DC mode, enter battery cutoff.
2. After system shutdown, wait 10sec.
3. Plug in AC to check system power on.
Change-Id: I5f4cf023fa70cff42c2d1cc888b1d2ee39226af4
Signed-off-by: David Huang <David.Huang@quantatw.com>
Reviewed-on: https://chromium-review.googlesource.com/427441
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Detachable devices need firmware help to process battery disconnect
requests promptly.
The request happens when the user keeps pressed both power and "volume
up" buttons and yanks the charger cable.
Once this condition is detected a 5 s timeout is started, and if the
charger cable is not plugged back in during this interval, the code
initiates a low polarity pulse on both EC_RST_L and BAT_EN outputs.
Lowering BAT_EN level will cause the battery cut off which is supposed
to cause an immediate system power down.
BRANCH=none
BUG=chrome-os-partner:59833
TEST=verified desired behavior on an H1 dev board with a H1B2-D chip.
Change-Id: Iecdcc93e228f4bc18734569bd896b0afa4bb752a
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/426345
Reviewed-by: Marius Schilder <mschilder@chromium.org>
* Rename PRIVATE_HOST_COMMAND_VALUE to EC_PRIVATE_HOST_COMMAND_VALUE to
make it clear it is part of EC and reduce the likelihood of collisions.
* Move PRIVATE_HOST_COMMAND_VALUE macro to ec_commands.h. This reduces the
transitive dependencies required to determine the value of a private host
command. This is beneficial for code outside of the ChromiumOS build
environment that needs to send private commands to an EC.
* Define DECLARE_PRIVATE_HOST_COMMAND when there is no host command task.
This will prevent builds with private commands from failing when the host
command task is not configured.
BUG=chromium:570895
BRANCH=none
TEST=make -j buildall
Change-Id: Iad938cb6a1521b65e4f893439d592ef375caace9
Reviewed-on: https://chromium-review.googlesource.com/426737
Commit-Ready: Carl Hamilton <carlh@chromium.org>
Tested-by: Carl Hamilton <carlh@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Reviewed-by: Shawn N <shawnn@chromium.org>
This commit adds a "spoof" mode feature to the motionsense stack. It
allows the user to arbitrarily set the outputs of the sensor in order to
"spoof" the readings of the sensor. This can be useful in emulating
tablet mode or device rotations. A command is available from the EC
console named `accelspoof` and there is a corresponding motionsense
command in ectool called `spoof`.
The usage is as follows:
- EC console
> accelspoof [id] [on/off] [X Y Z]
- ectool
# ectool motionsense spoof -- [id] [0/1] [X Y Z]
If on or off(or 0/1) is not specified, the current spoof mode status of
the sensor is returned. If on is specified, but no components are
provided, the sensor will lock the current values and provide those as
the spoofed values. If the components are provided, those will be used
as the spoofed values.
BUG=chromium:675263
BRANCH=cyan,glados,gru,oak
TEST=Flash a DUT with accels. From AP console, run `ectool motionsense
lid_angle` in a loop, use 'accelspoof' EC console command to set spoofed
values. Verify that the angle is fixed regardless of the actual angle
of the DUT.
TEST=Flash a DUT with accels. From AP console, use `ectool motionsense
spoof` to spoof values and verify that `ectool motionsense` reflects the
spoofed values. Test with both provided component values and no
component values.
Change-Id: Ie30688d22f38054e7243b1af493a3092b2cdfb72
Signed-off-by: Aseda Aboagye <aaboagye@google.com>
Reviewed-on: https://chromium-review.googlesource.com/421280
Commit-Ready: Aseda Aboagye <aaboagye@chromium.org>
Tested-by: Aseda Aboagye <aaboagye@chromium.org>
Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
Use binary search in host command lookup dispatcher
BUG=chromium:570895
TEST=manual testing on kevin
- Kevin boots
- ectool hello
make buildall -j
Verify *.smap hcmds section is sorted:
BOARD with host commands and private host commands
0004d0ec R __hcmds
0004d0ec R __host_cmd_0x00000x0000
0004d0f8 R __host_cmd_0x00000x0001
0004d104 R __host_cmd_0x00000x0002
0004d110 R __host_cmd_0x00000x0003
0004d11c R __host_cmd_0x00000x0004
0004d128 R __host_cmd_0x00000x0005
0004d134 R __host_cmd_0x00000x0007
0004d140 R __host_cmd_0x00000x0008
0004d14c R __host_cmd_0x00000x000a
0004d158 R __host_cmd_0x00000x000d
0004d164 R __host_cmd_0x00000x0010
0004d170 R __host_cmd_0x00000x0011
0004d17c R __host_cmd_0x00000x0012
0004d188 R __host_cmd_0x00000x0013
0004d194 R __host_cmd_0x00000x0015
0004d1a0 R __host_cmd_0x00000x0016
0004d1ac R __host_cmd_0x00000x0017
0004d1b8 R __host_cmd_0x00000x0087
0004d1c4 R __host_cmd_0x00000x008c
0004d1d0 R __host_cmd_0x00000x008f
0004d1dc R __host_cmd_0x00000x0092
0004d1e8 R __host_cmd_0x00000x0093
0004d1f4 R __host_cmd_0x00000x0097
0004d200 R __host_cmd_0x00000x0098
0004d20c R __host_cmd_0x00000x00b6
0004d218 R __host_cmd_0x00000x00d2
0004d224 R __host_cmd_0x00000x00d3
0004d230 R __host_cmd_0x3E000x0000
0004d23c R __host_cmd_0x3E000x0002
0004d248 R __evt_src_EC_MKBP_EVENT_HOST_EVENT
0004d248 R __hcmds_end
BOARD with host commands only
100bc888 R __hcmds
100bc888 R __host_cmd_0x00000x0000
100bc894 R __host_cmd_0x00000x0001
100bc8a0 R __host_cmd_0x00000x0002
100bc8ac R __host_cmd_0x00000x0003
100bc8b8 R __host_cmd_0x00000x0004
100bc8c4 R __host_cmd_0x00000x0005
100bc8d0 R __host_cmd_0x00000x0006
100bc8dc R __host_cmd_0x00000x0007
100bc8e8 R __host_cmd_0x00000x0008
100bc8f4 R __host_cmd_0x00000x0009
100bc900 R __host_cmd_0x00000x000a
100bc90c R __host_cmd_0x00000x000b
100bc918 R __host_cmd_0x00000x000d
100bc924 R __host_cmd_0x00000x0010
100bc930 R __host_cmd_0x00000x0011
100bc93c R __host_cmd_0x00000x0012
100bc948 R __host_cmd_0x00000x0013
100bc954 R __host_cmd_0x00000x0015
100bc960 R __host_cmd_0x00000x0016
100bc96c R __host_cmd_0x00000x0017
100bc978 R __host_cmd_0x00000x0025
100bc984 R __host_cmd_0x00000x0026
100bc990 R __host_cmd_0x00000x0029
100bc99c R __host_cmd_0x00000x002a
100bc9a8 R __host_cmd_0x00000x002b
100bc9b4 R __host_cmd_0x00000x002c
100bc9c0 R __host_cmd_0x00000x0044
100bc9cc R __host_cmd_0x00000x0045
100bc9d8 R __host_cmd_0x00000x0046
100bc9e4 R __host_cmd_0x00000x0047
100bc9f0 R __host_cmd_0x00000x0061
100bc9fc R __host_cmd_0x00000x0062
100bca08 R __host_cmd_0x00000x0064
100bca14 R __host_cmd_0x00000x0065
100bca20 R __host_cmd_0x00000x0067
100bca2c R __host_cmd_0x00000x0087
100bca38 R __host_cmd_0x00000x008c
100bca44 R __host_cmd_0x00000x008d
100bca50 R __host_cmd_0x00000x008f
100bca5c R __host_cmd_0x00000x0092
100bca68 R __host_cmd_0x00000x0093
100bca74 R __host_cmd_0x00000x0096
100bca80 R __host_cmd_0x00000x0097
100bca8c R __host_cmd_0x00000x0098
100bca98 R __host_cmd_0x00000x0099
100bcaa4 R __host_cmd_0x00000x009e
100bcab0 R __host_cmd_0x00000x00a0
100bcabc R __host_cmd_0x00000x00a1
100bcac8 R __host_cmd_0x00000x00a8
100bcad4 R __host_cmd_0x00000x00a9
100bcae0 R __host_cmd_0x00000x00b6
100bcaec R __host_cmd_0x00000x00b7
100bcaf8 R __host_cmd_0x00000x00d2
100bcb04 R __host_cmd_0x00000x00d3
100bcb10 R __host_cmd_0x00000x00db
100bcb1c R __host_cmd_0x00000x0101
100bcb28 R __host_cmd_0x00000x0102
100bcb34 R __host_cmd_0x00000x0103
100bcb40 R __host_cmd_0x00000x0104
100bcb4c R __host_cmd_0x00000x0110
100bcb58 R __host_cmd_0x00000x0111
100bcb64 R __host_cmd_0x00000x0112
100bcb70 R __host_cmd_0x00000x0113
100bcb7c R __host_cmd_0x00000x0114
100bcb88 R __host_cmd_0x00000x0115
100bcb94 R __host_cmd_0x00000x0116
100bcba0 R __host_cmd_0x00000x0117
100bcbac R __host_cmd_0x00000x0118
100bcbb8 R __host_cmd_0x00000x011a
100bcbc4 R __evt_src_EC_MKBP_EVENT_KEY_MATRIX
100bcbc4 R __hcmds_end
BRANCH=none
Change-Id: I5d13d2a7fe7fa9a0fbeed43177cc612f572a58bb
Reviewed-on: https://chromium-review.googlesource.com/419702
Commit-Ready: Sam Hurst <shurst@google.com>
Tested-by: Sam Hurst <shurst@google.com>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Reviewed-by: Shawn N <shawnn@chromium.org>
- Before the change was made, the "__ro_end" was at 00013520h.
We change to 00012760h.
- Rename "CONFIG_IT83XX_ILM_BLOCK_SIZE" to "IT83XX_ILM_BLOCK_SIZE"
this is because we don't support reconfiguration at board-level.
- Put some task functions into "__ram_code" section to
fill the gap and improving performance of code-fetch.
Signed-off-by: Dino Li <dino.li@ite.com.tw>
BRANCH=none
BUG=none
TEST=console commands: flasherase, flashwrite, and flashread.
Change-Id: I2f2906a2a0b6971aadd00120c282801161447808
Reviewed-on: https://chromium-review.googlesource.com/424248
Commit-Ready: Dino Li <Dino.Li@ite.com.tw>
Tested-by: Dino Li <Dino.Li@ite.com.tw>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
TPM NVMEM commits are reenabled as soon as the system boots into
Chrome OS. However, sometimes the device does not boot into Chrome OS,
in which case it is necessary to be able to reinstate NVMEM commits
explicitly.
The new vendor command will provide this functionality.
BRANCH=none
BUG=chrome-os-partner:59873
TEST=added code to depthcharge to issue the new vendor command if the
system falls into recovery mode, verify that commits are
re-instated once the command is issued.
Change-Id: I3c06b27175751dc2c095911441935eee62ed9c50
Reviewed-on: https://chromium-review.googlesource.com/424064
Commit-Ready: Vadim Bendebury <vbendeb@chromium.org>
Tested-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This patch eliminates NVMEM commits at system startup, namely between
the moment the TPM is reset and the moment the AP is trying to read a
PCR (which is an indication of the AP having booted into OS).
To avoid losing NVMEM changes in case TPM is reset before PCR Read
command is issued, pending changes (if any) are saved before TPM reset
is processed.
For the same reason TPM reset invocation is being added to the hard
reboot path; this will kick in when there is a restart after cr50
firmware update.
BRANCH=none
BUG=chrome-os-partner:59873
TEST=with instrumented coreboot/depthcharge observed the following
execution times for various TPM command issued at startup
command 0x144, 15203 us
command 0x14e, 11814 us
command 0x182, 12461 us
command 0x182, 12456 us
command 0x138, 11503 us
command 0x138, 11512 us
command 0x14e, 14648 us
command 0x14e, 12597 us
command 0x121, 11353 us
which totals 113 ms and shaves more than 200 ms off the boot time.
Change-Id: Ic52309291fdb9c3ede96e0ad015ad9fc076bddc5
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/424063
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Andrey Pronin <apronin@chromium.org>
The new code allows to replace the existing one buffer at a time
shared memory facility with a malloc/free implementation. A new
configuration option is being provided (CONFIG_MALLOC).
The names of functions allocating and freeing memory are not being
changed to allow to switch between the two implementations seamlessly.
A double linked list of buffers is used to keep track of free and
allocated memory. During initialization the entire free memory block
is considered a single free buffer. No allocations/frees are allowed
from within interrupts. The control structures are protected by a
semaphore, so allocate and free invocation could be blocking.
A test is added which randomly allocates and frees memory, continuing
until all branches in the allocate and free functions are taken.
BUG=chrome-os-partner:
TEST=make buildall -j succeeds, which includes testing the new
malloc/free implementation.
Change-Id: I5e71c0190c6c247ec73bb459f66a6d7a06e3d248
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/420466
Reviewed-by: Randall Spangler <rspangler@chromium.org>
ISL9237 and ISL9238 are almost identical, with few register changes,
let's make the driver generic, to support both chargers.
BRANCH=none
BUG=chrome-os-partner:61166
TEST=make buildall -j
Change-Id: I029894dd62ab7e45897d877289707ee8c1ff1d09
Reviewed-on: https://chromium-review.googlesource.com/422197
Commit-Ready: Nicolas Boichat <drinkcat@chromium.org>
Tested-by: Nicolas Boichat <drinkcat@chromium.org>
Reviewed-by: Nicolas Boichat <drinkcat@chromium.org>
This error code is used to indicates the data has not changed.
Motion sense task will therefore not add any entry in the sensor FIFO.
BUG=chrome-os-partner:59423
TEST=make -j buildall
BRANCH=reef
Change-Id: I58b9be5675d8949bd682d8c89dadea1dfff9bf2e
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/424856
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Added common code for charger profile override for fast charging.
Fast charging configs can be defined in the respective board battery
file and use the common code for imposing the custom data.
BUG=chrome-os-partner:59393
BRANCH=none
TEST=Enabled the config on Reef. Manually overrode the temperature
and voltage. Observed correct charge profile config is selected
for each tests.
Change-Id: I075d271258470b98d38e4d5395d749469d3fd469
Signed-off-by: Vijay Hiremath <vijay.p.hiremath@intel.com>
Reviewed-on: https://chromium-review.googlesource.com/407928
Commit-Ready: Vijay P Hiremath <vijay.p.hiremath@intel.com>
Tested-by: Vijay P Hiremath <vijay.p.hiremath@intel.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
For oak, set a different list of task (no als, no accel) for compiling
revision 4 or less. Fix GPIO include issue.
BUG=chrome-os-partner:59423,chrome-os-partner:59084
TEST=compile for oak with board 4 and 5, tested on Reef.
BRANCH=kevin,reef
Change-Id: I09051a69cbad6d477a7b3bf9907f4c5c144b5136
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/424220
Reviewed-by: Randall Spangler <rspangler@chromium.org>
The CONFIG_FLASH_NVMEM option implements persistent, reliable storage
regions in flash. This adds CONFIG_FLASH_NVMEM_VARS, which uses one of
those storage regions for free-form variables.
Refer to the comments in include/nvmem_vars.h and common/nvmem_vars.c
for usage and implementation details.
BUG=chrome-os-partner:61107
BRANCH=none
TEST=make runtests
This CL includes a number of new tests, specifically for this feature.
No target boards use this feature yet so there's nothing to test on
actual hardware, but the test/nvmem_vars executable includes console
commands ("get", "set", "print") to try it out.
Change-Id: I8597415dc3b00a1462f5b164eeb5073129030525
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/414194
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
After every reboot, we were resetting the write protect and console
lock states back to default. With this change the wp and lock states
will be preserved through deep sleep. They will still be reset on any
other type of reboot (like Power On reset or panic).
The states are also cleared if the system detects a rollback even when
booting from the deep sleep.
With this patch it is going to be impossible to remove hardware write
protection guarding writes into AP and EC firmware flash, unless the
cr50 console is unlocked.
Locking the console would reinstate hardware write protection
automatically even if it was disabled when the console was unlocked.
Two long life scratch register 1 bits are used to keep the console and
write protect states over resets. To make code cleaner bitmap
assignments of the long life scratch register is put in its own
include file.
BUG=chrome-os-partner:58961
BRANCH=none
TEST=manual
On prod/dev images verify that the default wp and console lock
states are still correct.
change the lock and write protect states from the default and
verify they are preserved through deep sleep.
reboot cr50 and make sure that they are reset.
unlock the console and enable flash writes, then set fallback
counter on cr50 to the value of 6 (rw 0x40000128 1; rw
0x4000012c 6) and put the AP into deep sleep by hitting
Alt-H-VolUp.
In five minutes press the power button on the device to bring
it back from s5. Observe cr50 fall back to an older image and
console lock and wp disabled.
Change-Id: Ie7e62cb0b2eda49b04a592ee1d0903e83246b045
Signed-off-by: Mary Ruthven <mruthven@chromium.org>
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/420812
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
There are plans to extend use of the LONG_LIFE_SCRATCH1 register for
other purposes than keeping board properties. Just as the board
properties, the new use is also very board specific. This patch moves
the board properties code from chip/g to board/cr50, where it belongs.
Instead of reading board properties bitmap and checking if various
bits are set, api functions are now provided to allow determining
various properties settings without actually looking at the properties
bitmap.
CQ-DEPEND=CL:*313057
BRANCH=none
BUG=chrome-os-partner:58961
TEST=verified that both Gru and Reef boot with the new image,
additionally, on Reef confirmed that it is possible to
communicate with the H1 over USB, and that plt_reset signal is
handled properly.
Change-Id: Id0dd2dc16389f773a149fb01eee1ce7bb99c4547
Reviewed-on: https://chromium-review.googlesource.com/422081
Commit-Ready: Vadim Bendebury <vbendeb@chromium.org>
Tested-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-by: Scott Collyer <scollyer@chromium.org>
This adds a vendor command to invalidate the old rw. It should be used
when the tpm has been validated.
BUG=chrome-os-partner:55667
BRANCH=none
TEST=manual
run the vendor command
run 'ver' on the cr50 console and verify the inactive RW version
is Error
reboot cr50 10 times and make sure there is no rollback.
Change-Id: Ibec3dde77d6b1ab921e43613d54638b7318f3f57
Signed-off-by: Mary Ruthven <mruthven@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/420407
Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
In some cases, the virtual battery code creates
transactions that violate SB spec.
One example:
If the host command is structured as two messages -
a write to 0x03 (reg addr), followed by two bytes of write data,
the first byte of the second message (write data) will be sent to
virtual_battery_read(), as if it were a reg read request.
Let's do the following change for virtual battery:
1. Parse the command more carefully with state machines.
2. Support write caching for some critical registers.
3. Cache more attributes (0x03 and 0x0f).
BUG=chrome-os-partner:59239, chromium:659819
BRANCH=none
TEST='power_supply_info' works on kevin
Change-Id: Icdeb12b21f0dc3c329f29b206b7b9395ca4c9998
Reviewed-on: https://chromium-review.googlesource.com/407987
Commit-Ready: Philip Chen <philipchen@chromium.org>
Tested-by: Philip Chen <philipchen@chromium.org>
Reviewed-by: Shawn N <shawnn@chromium.org>
During discovery, if adapter requests vconn power in the AMA flags,
make sure that we provide vconn.
This, for example, is necessary for the Apple HDMI adapter to work
on boot, when connected in S5. In that case, adapter does request
vconn swap, but we reject that as the system is off, and, therefore
5V supply is off. On boot, we send another discovery request, which
will detect this case and swap the power.
BRANCH=none
BUG=chromium:644663
TEST=On elm, S5. Plug adapter with power+HDMI. Switch on elm,
type "pd 0 vdm ident" in console, display works.
Change-Id: I55b6658c2bc0574b8427ae086f61daf03730a725
Reviewed-on: https://chromium-review.googlesource.com/415697
Commit-Ready: Nicolas Boichat <drinkcat@chromium.org>
Tested-by: Nicolas Boichat <drinkcat@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Rename the variable to actually tell us what it does (it sends a
Discover Identity command), instead of littering the code with
comments explaining why we set DATA_SWAPPED when the data roles
have not really been swapped.
BRANCH=none
BUG=chromium:644663
TEST=make buildall -j
Change-Id: Idbad38e48a55d6518ef82b32a4d96fee65264aae
Reviewed-on: https://chromium-review.googlesource.com/415696
Commit-Ready: Nicolas Boichat <drinkcat@chromium.org>
Tested-by: Nicolas Boichat <drinkcat@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Shawn N <shawnn@chromium.org>
* Include trng.h from trng.c before any other header to verify that the
header is self-contained.
* Add inclusion of stdint.h to trng.h to provide definition for uint32_t.
BUG=none
BRANCH=none
TEST=make -j buildall
Change-Id: I78fb6d915c357236ca0fed2a57f093f0eec07fe9
Reviewed-on: https://chromium-review.googlesource.com/417424
Commit-Ready: Carl Hamilton <carlh@chromium.org>
Tested-by: Carl Hamilton <carlh@chromium.org>
Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Modified the SPI NOR flash driver to implement
and expose a read JEDEC ID command as well as
support block (64KiB) erase operations.
BUG=None
BRANCH=None
TEST=Built all targets. Tested on two different EEPROMs.
Before:
-------------------------------------------
$ ~/haven_updater$ ./read_jedec_ftdi
[+] JEDEC_ID=0x1940ef
$ ~/haven_updater$ time ./chip_erase_ftdi
[+] Success!
real 4m0.440s
user 0m6.674s
sys 0m11.998s
-------------------------------------------
$ ~/haven_updater$ ./read_jedec_ftdi
[+] JEDEC_ID=0xc21a20c2
$ ~/haven_updater$ time ./chip_erase_ftdi
[+] Success!
real 5m57.291s
user 0m9.964s
sys 0m18.363s
-------------------------------------------
After:
-------------------------------------------
$ ~/haven_updater$ ./read_jedec_ftdi
[+] JEDEC_ID=0x1940ef
$ ~/haven_updater$ time ./chip_erase_ftdi
[+] Success!
real 1m33.176s
user 0m2.327s
sys 0m5.050s
-------------------------------------------
$ ~/haven_updater$ ./read_jedec_ftdi
[+] JEDEC_ID=0xc21a20c2
$ ~/haven_updater$ time ./chip_erase_ftdi
[+] Success!
real 2m41.923s
user 0m4.191s
sys 0m8.576s
-------------------------------------------
Change-Id: Ic20372ca9966499977a52a700d6492d3f648d7b2
Signed-off-by: Nadim Taha <ntaha@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/416903
Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-by: Shawn N <shawnn@chromium.org>
gru has circuitrythat selects the charge LED color based on the
frequency of the PWM.
By adjusting the PWM frequency instead of just the duty, we gain more
control over the brightness of the charge LED.
BUG=chrome-os-partner:54155
BRANCH=gru
TEST=activate each LED in turn and confirm color and brightness
Change-Id: Ie653125a528595c1ec68aea4d02cb70595a1b151
Signed-off-by: David Schneider <dnschneid@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/415517
Reviewed-by: Shawn N <shawnn@chromium.org>
If battery is not present, input current is set to PD_MAX_CURRENT_MA.
If the input power set is greater than the maximum allowed system power,
system might get damaged. Hence, limit the input current to meet maximum
allowed input system power.
BUG=chrome-os-partner:58498
BRANCH=none
TEST=Manually tested on Reef. Removed the battery & using 'charger'
console command observed the following.
With Zinger charger at 20V - Input current is set to 2.25A
With Type-C & other chargers - Input current is set to 3A
Change-Id: Ife8686f322e095aa74b740a7c469bfe87107fb9a
Signed-off-by: Vijay Hiremath <vijay.p.hiremath@intel.com>
Reviewed-on: https://chromium-review.googlesource.com/397865
Commit-Ready: Vijay P Hiremath <vijay.p.hiremath@intel.com>
Tested-by: Vijay P Hiremath <vijay.p.hiremath@intel.com>
Reviewed-by: Shawn N <shawnn@chromium.org>
Upon requesting a PD power contract at a new voltage, keep the input
current limit at 500mA until PD_RDY is received.
BUG=b:30744563,chrome-os-partner:59311,chrome-os-partner:44340
BRANCH=ryu, gru, glados
TEST=Manual on kevin, set ilim to 5V through `chglim` console command,
attach zinger. Set ilim to 20V through `chglim`, verify that ilim goes
from 3A to 500mA to 3A.
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Change-Id: I452f183cfb958780e336a9f99dc6398356de17a0
Reviewed-on: https://chromium-review.googlesource.com/399918
Commit-Ready: Shawn N <shawnn@chromium.org>
Tested-by: Shawn N <shawnn@chromium.org>
Reviewed-by: Todd Broch <tbroch@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
When a WAIT is received in response to a request, wait SinkRequestTime
before resending the request.
BUG=chrome-os-partner:34984
TEST=make -j buildall
BRANCH=none
Change-Id: I5c8429c4a7b9cf06609996f924b8d9d535ab6b5f
Reviewed-on: https://chromium-review.googlesource.com/414533
Commit-Ready: Sam Hurst <shurst@google.com>
Tested-by: Sam Hurst <shurst@google.com>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Common code is more flexible and supports more parts, so delete the
npcx-only register translation code.
BUG=chrome-os-partner:60029
BRANCH=gru
TEST=Manual on gru, run 'flashrom -p ec --wp-enable' and check that 0x28
gets written to SR1, which matches our desired 'protect botton 128KB',
according to the datasheet. Also run 'flashrom -p ec --erase' then read
back EC SPI contents, verify ROM is erased except for first 128KB
region.
Change-Id: I526401997ff7ec77f2a6047a4a9af74a671ed69a
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/413228
Reviewed-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit 43634d36d273887b1f2349c333a7b4b229a83365)
Reviewed-on: https://chromium-review.googlesource.com/415498
Commit-Ready: Shawn N <shawnn@chromium.org>
Tested-by: Shawn N <shawnn@chromium.org>
On the bd9995*, back boosting may occur when actual battery voltage
drops below VBAT register setting. Maintain the VBAT register at the
battery-requested charge voltage even when not charging to ensure the
bd9995* doesn't become a back boosted animal.
BUG=chrome-os-partner:56139,chrome-os-partner:54248
BRANCH=gru
TEST=Manual on kevin, unplug AC, run 'charger', verify that 'V_batt' is
maintained at 8688 mV. Attach charger, verify 'V_batt' stays at 8688 mV
and device charges.
Change-Id: Ia0cc7f9279cb460e20a8faf332ad432067dc5482
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/400087
Commit-Ready: Daisuke Nojiri <dnojiri@chromium.org>
Tested-by: Shawn N <shawnn@chromium.org>
Reviewed-by: Vijay P Hiremath <vijay.p.hiremath@intel.com>
Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
Enabling and disabling sleep in the rdd interrupt is redundant because
USB already takes care of that. When USB is initialized it will disable
sleep. If it is released or suspended then it will re-enable sleep. This
change removes the sleep enable and disable from the rdd interrupt. With
this change now sleep can be enabled while suzyq is still plugged in
using the command 'ccd disable'.
BUG=none
BRANCH=none
TEST=manual
The consoles still work
Updating the EC, AP and Cr50 still works
After running 'reboot ap-off' in the EC console and 'ccd
disable' in the Cr50 console Cr50 will go to sleep.
Change-Id: Ie8e6201e9fd611c514e93bc70d298d3b0d228611
Signed-off-by: Mary Ruthven <mruthven@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/413606
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Let's make sure that both embedded and host side use the same command
definitions. To avoid host compilation problems move the definitions
into a separate file.
BRANCH=none
BUG=none
TEST=compilation still works.
Change-Id: Id0d85a51aebabed0637965b3b19d7ed42c46e75e
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/414945
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Cr50 updates in development environment should allow resetting the
device immediately after update (without the need for SYS_RST_L to be
toggled).
This patch adds a vendor command to do just that.
BRANCH=none
BUG=chrome-os-partner:60013. chrome-os-partner:60321
TEST=none yet, with the rest of the patches applied the target gets
rebooted immediately after a cr50 code update. Also, observed
that flashing the console does not quite work, opend
crosbug.com/p/60321 to address this.
Change-Id: Ia6f99ad6d22004347ad02aac2cbf4dd6c5594928
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/414442
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
