Mary Ruthven a285debf1f g: remove sleep disable/enable in rdd ...

Enabling and disabling sleep in the rdd interrupt is redundant because
USB already takes care of that. When USB is initialized it will disable
sleep. If it is released or suspended then it will re-enable sleep. This
change removes the sleep enable and disable from the rdd interrupt. With
this change now sleep can be enabled while suzyq is still plugged in
using the command 'ccd disable'.

BUG=none
BRANCH=none
TEST=manual
	The consoles still work

	Updating the EC, AP and Cr50 still works

	After running 'reboot ap-off' in the EC console and 'ccd
	disable' in the Cr50 console Cr50 will go to sleep.

Change-Id: Ie8e6201e9fd611c514e93bc70d298d3b0d228611
Signed-off-by: Mary Ruthven <mruthven@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/413606
Reviewed-by: Bill Richardson <wfrichar@chromium.org>

2016-11-28 20:55:02 -08:00

..

accelgyro.h

Fix various misspellings in comments

2016-11-15 17:41:53 -08:00

acpi.h

…

adc.h

servo_v4: Fix ADC console command

2016-05-26 16:17:26 -07:00

als.h

ALS: Disable the ALS task if all the ALS inits fail

2015-10-02 12:55:51 -07:00

ap_hang_detect.h

…

backlight.h

gpio: Refactor IRQ handler pointer out of gpio_list

2015-04-10 22:08:25 +00:00

battery_bq27621_g1.h

battery: Add support for TI's BQ27621_g1 fuel gauge.

2014-12-31 00:01:00 +00:00

battery_smart.h

Fix various misspellings in comments

2016-11-15 17:41:53 -08:00

battery.h

BD9995X/reef/snappy/pyro: Boot from the shipmode battery

2016-11-18 20:07:47 -08:00

bluetooth_le_ll.h

btle: Accepts and maintains connections

2016-08-23 15:36:55 -07:00

bluetooth_le.h

btle: Timeout of ble_rx now based on chip time

2016-08-12 20:49:45 -07:00

board_config.h

power: Add board callback before RSMRST# state change

2016-10-26 01:44:06 -07:00

btle_hci2.h

include: Add HCI include files from NewBlue

2016-07-22 20:37:17 -07:00

btle_hci_int.h

include/btle_hcl_int.h: Fix misspellings in #defines and struct name

2016-11-15 17:41:58 -08:00

button.h

…

byteorder.h

Move include/byteorder.h -> builtin/endian.h

2016-04-22 20:40:03 -07:00

capsense.h

…

case_closed_debug.h

g: use devid 0 and 1 to create a serial number

2016-10-11 23:01:59 -07:00

charge_manager.h

kevin: set accurate current limit on USB load switch

2016-10-31 03:27:49 -07:00

charge_ramp.h

charge_manager: Pass uncapped / max current to current limit callback

2016-09-13 22:21:23 -07:00

charge_state_v1.h

…

charge_state_v2.h

i2c: get battery information from charge state

2015-10-27 11:52:34 -07:00

charge_state.h

cleanup: Rename charge_temp_sensor_get_val() to charge_get_battery_temp()

2016-10-14 18:49:36 -07:00

charger_detect.h

lucid: add support to detect BC1.2 suppliers

2016-02-26 21:22:07 -08:00

charger.h

Fix various misspellings in comments

2016-11-15 17:41:53 -08:00

chipset.h

apollolake: ignore PLTRST# from SOC unless RSMRST# is deasserted

2016-05-03 15:40:46 -07:00

clock.h

stm32: Add delay after enabling peripheral clock

2015-02-10 10:47:07 +00:00

common.h

common.h: Create __bss_slow tag.

2015-11-08 07:59:40 -08:00

compile_time_macros.h

NPCX: Refactor GPIO driver for functionality and size

2016-03-02 11:22:51 -08:00

config_std_internal_flash.h

cleanup: Remove CONFIG_FW_IMAGE_SIZE

2015-09-24 18:07:01 -07:00

config.h

Revert "ec: Improve efficiency of host command dispatcher"

2016-11-26 01:29:24 +00:00

console_channel.inc

driver/touchpad_elan: Basic elan touchpad driver

2016-11-08 23:24:52 -08:00

console.h

Add console support for restricted commands

2016-08-31 17:12:58 +00:00

consumer.h

cleanup: fix all the header guards

2015-06-18 19:07:00 +00:00

crc8.h

crc8: Support crc calculation across non-contiguous data

2016-03-18 22:16:53 -07:00

crc.h

cleanup: fix all the header guards

2015-06-18 19:07:00 +00:00

device_state.h

cr50: notify chipset hooks when the AP state changes

2016-09-22 18:04:57 +00:00

dma.h

common: Change interface to dma_test

2015-07-27 22:19:16 +00:00

dptf.h

…

ec_commands.h

Revert "ec: Improve efficiency of host command dispatcher"

2016-11-26 01:29:24 +00:00

eeprom.h

…

espi.h

npcx: Add espi driver of npcx5mng for x86-based platform.

2016-08-10 22:16:57 -07:00

extension.h

tpm: move extension and vendor command definitions into own file

2016-11-28 20:53:50 -08:00

extpower.h

Remove obsolete board-specific code

2015-06-10 18:24:05 +00:00

fan.h

Samus: Handle fan startup in the EC, not the fan controller

2014-11-06 02:28:22 +00:00

flash.h

flash: Call lock function prior to mapped external read

2016-09-16 21:59:08 -07:00

gesture.h

common: motion: move gesture actions in motion task.

2015-09-18 17:55:32 -07:00

gpio_list.h

Add check to prevent duplicate PIN assignments

2016-09-09 17:15:25 -07:00

gpio_signal.h

mec1322: Simplify GPIO lists

2015-05-27 03:58:16 +00:00

gpio.h

servo_micro: add gpio mode get and set

2016-04-27 14:04:07 -07:00

gpio.wrap

mec1322: Simplify GPIO lists

2015-05-27 03:58:16 +00:00

hooks.h

common: Add TABLET_MODE hook.

2016-09-07 14:01:18 -07:00

host_command.h

Revert "ec: Improve efficiency of host command dispatcher"

2016-11-26 01:29:24 +00:00

hwtimer.h

…

i2c.h

Fix various misspellings in comments

2016-11-15 17:41:53 -08:00

i8042_protocol.h

…

inductive_charging.h

cleanup: fix all the header guards

2015-06-18 19:07:00 +00:00

jtag.h

gpio: Refactor IRQ handler pointer out of gpio_list

2015-04-10 22:08:25 +00:00

keyboard_8042_sharedlib.h

libsharedobjs: Add 8042 scancodes to shared lib.

2015-07-17 03:18:03 +00:00

keyboard_8042.h

keyboard: Always call keyboard_state_changed

2016-11-17 07:08:25 -08:00

keyboard_config.h

common: Add new recovery mode button combination

2016-11-08 20:30:07 -08:00

keyboard_mkbp.h

mkbp: Add support for buttons and switches.

2016-07-19 18:33:36 -07:00

keyboard_protocol.h

keyboard: Always call keyboard_state_changed

2016-11-17 07:08:25 -08:00

keyboard_raw.h

ectool: Support keyboard factory scanning

2016-04-01 00:21:35 -07:00

keyboard_scan.h

common: Add new recovery mode button combination

2016-11-08 20:30:07 -08:00

keyboard_test.h

…

lb_common.h

common: lightbar: put multiple commands under i2c_lock

2015-09-19 12:27:21 -07:00

led_common.h

Fix various misspellings in comments

2016-11-15 17:41:53 -08:00

libsharedobjs.h

libsharedobjs: Add libsharedobjs.h.

2015-07-17 03:17:57 +00:00

lid_angle.h

Cyan: Added Clamshell/Tablet mode support

2015-08-10 20:42:18 +00:00

lid_switch.h

…

lightbar_msg_list.h

Remove PULSE and TEST sequences from lightbar module

2014-10-08 02:50:54 +00:00

lightbar_opcode_list.h

lightbar: interpreter additions to encode other patterns

2014-10-15 18:22:37 +00:00

lightbar.h

common: lightbar: Add histeresis to prevent flickering

2015-10-23 18:03:12 -07:00

link_defs.h

cr50: reset only the TPM state on SYS_RST_L

2016-09-24 13:53:26 -07:00

lpc.h

lpc: Add function for host reset without RCIN GPIO

2016-10-26 01:44:08 -07:00

mag_cal.h

common: Add magnetometer online calibration.

2015-10-13 05:28:54 -07:00

mat33.h

common: Add magnetometer online calibration.

2015-10-13 05:28:54 -07:00

mat44.h

common: Add magnetometer online calibration.

2015-10-13 05:28:54 -07:00

math_util.h

common: Add magnetometer online calibration.

2015-10-13 05:28:54 -07:00

memory_commands.h

…

mkbp_event.h

mkbp_event: Properly queue events during host sleep

2016-11-04 18:31:37 -07:00

module_id.h

stm32f446e-eval: add support for stm32f446

2016-08-17 16:19:07 -07:00

motion_lid.h

common: Add tablet_mode API

2016-11-08 17:11:28 -08:00

motion_sense.h

motion: remove accel_int_xxx, dead code

2016-09-09 12:33:25 -07:00

nvmem.h

Cr50: Prevent rebooting when unlocking the console

2016-11-19 00:14:24 -08:00

onewire.h

…

panic.h

nds32: fix panic

2015-10-07 17:51:36 -07:00

peci.h

…

pmu_tpschrome.h

cleanup: fix all the header guards

2015-06-18 19:07:00 +00:00

port80.h

mec1322: Change the Port 80 task to a timer IRQ.

2015-10-19 18:21:22 -07:00

power_button.h

cleanup: Fix signed vs unsigned typing

2016-02-03 21:34:47 -08:00

power_led.h

…

power.h

Apollolake: Enter/exit from S0ix based on host commands from kernel

2016-11-17 16:09:44 -08:00

printf.h

printf: Add sign ('+') flag

2016-07-29 10:51:22 -07:00

producer.h

cleanup: fix all the header guards

2015-06-18 19:07:00 +00:00

pwm.h

pwm: Increse PWM duty resolution to 16bits

2016-09-02 15:12:13 -07:00

queue_policies.h

cleanup: fix all the header guards

2015-06-18 19:07:00 +00:00

queue.h

Queue: Add ability to modify contiguous units inplace

2015-07-15 21:57:36 +00:00

rsa.h

cleanup: Handle signed RW images a bit cleaner

2015-09-25 19:36:37 -07:00

sfdp.h

common: Fixes the SFDP_BITFIELD() macro.

2016-01-29 02:59:58 +00:00

sha1.h

cleanup: fix all the header guards

2015-06-18 19:07:00 +00:00

sha256.h

cleanup: fix all the header guards

2015-06-18 19:07:00 +00:00

shared_mem.h

…

smbus.h

Fix various misspellings in comments

2016-11-15 17:41:53 -08:00

software_panic.h

samus: panic reboot EC if PD MCU crashes

2015-02-18 04:53:59 +00:00

spi_flash_reg.h

Celes: Add define to support GD25Q41B for External EC ROM.

2015-09-15 19:17:53 -07:00

spi_flash.h

flash: Add command to get SPI flash chip info

2016-09-23 12:21:51 -07:00

spi_nor.h

common: Adds a JEDEC SFDP v1.* based Serial NOR Flash driver

2016-01-28 21:45:37 +00:00

spi.h

cr50: adds the SPI master driver

2015-12-21 14:58:54 -08:00

stack_trace.h

cleanup: fix all the header guards

2015-06-18 19:07:00 +00:00

switch.h

gpio: Refactor IRQ handler pointer out of gpio_list

2015-04-10 22:08:25 +00:00

system.h

g: remove sleep disable/enable in rdd

2016-11-28 20:55:02 -08:00

tablet_mode.h

common: Add tablet_mode API

2016-11-08 17:11:28 -08:00

task_id.h

Add cts.tasklist

2016-07-11 21:27:46 -07:00

task.h

stm32f446e-eval: add support for stm32f446

2016-08-17 16:19:07 -07:00

temp_sensor_chip.h

cleanup: fix all the header guards

2015-06-18 19:07:00 +00:00

temp_sensor.h

…

test_util.h

host: mock i2c_xfer

2015-09-16 14:49:46 -07:00

thermal.h

Show the fan-cooling percentage for each active temp sensor

2015-01-14 03:15:41 +00:00

throttle_ap.h

Add more build conditions on x86-only code.

2014-08-10 18:39:24 +00:00

timer.h

timer: fix clock() implementation to match TPM2 library expectations

2016-07-21 17:32:28 -07:00

tpm_manufacture.h

CR50: add endorsement certificate flow

2016-07-23 02:18:49 +00:00

tpm_registers.h

Cr50: Prevent rebooting when unlocking the console

2016-11-19 00:14:24 -08:00

tpm_vendor_cmds.h

tpm: move extension and vendor command definitions into own file

2016-11-28 20:53:50 -08:00

trng.h

Enforce compilation without system headers

2016-02-03 15:00:50 -08:00

uart.h

UART: Remove enable/disable interrupt functions

2016-04-27 10:10:02 -07:00

update_fw.h

servo_v4: copypasta usb updater code into common

2016-07-21 13:13:35 -07:00

usb_api.h

cr50: Detect debug cable and switch the PHY

2016-04-13 20:10:38 -07:00

usb_bb.h

cleanup: fix all the header guards

2015-06-18 19:07:00 +00:00

usb_charge.h

bd99955: Improve interrupt / USB charger task wake scheme

2016-06-16 12:27:42 -07:00

usb_console.h

update case closed debugging partial mode policy

2015-09-08 13:49:09 -07:00

usb_descriptor.h

sweetberry: add usb power logging interface

2016-11-11 17:20:19 -08:00

usb_hid_touchpad.h

chip/stm32/usb_hid: Add USB HID touchpad driver

2016-11-22 18:36:37 -08:00

usb_hid.h

chip/stm32/usb_hid: Separate HID keyboard support

2016-11-16 19:04:47 -08:00

usb_i2c.h

usb_i2c: refactor into common

2016-11-02 17:39:56 -07:00

usb_mux.h

kevin / gru: Notify host of HPD IRQ status

2016-08-10 20:07:32 -07:00

usb_pd_tcpc.h

tcpm: Add configuration struct for tcpc i2c params

2015-11-08 17:31:12 -08:00

usb_pd_tcpm.h

reef: enable tcpc-controlled drp toggle

2016-11-02 06:42:04 -07:00

usb_pd.h

reef: enable tcpc-controlled drp toggle

2016-11-02 06:42:04 -07:00

util.h

CR50: remove dependence of assert.h on util.h

2016-05-25 18:51:07 -07:00

vboot_hash.h

vboot_hash: Abort hash calculation on flash write

2015-07-01 03:49:00 +00:00

vec3.h

common: Add magnetometer online calibration.

2015-10-13 05:28:54 -07:00

vec4.h

common: Add magnetometer online calibration.

2015-10-13 05:28:54 -07:00

version.h

zinger: samus_pd: change zinger SW ver to report commit count

2014-08-28 20:12:52 +00:00

watchdog.h

zinger: change watchdog timeout to 1.8 second

2014-06-17 18:34:03 +00:00

wireless.h

Initial Glower commit

2015-01-20 20:56:43 +00:00