Previously CONFIG_USB_PD_TCPM_VBUS had two uses which were independent:
- When operating as a TCPC, it indicated that the VBUS level should be
tracked (through GPIO inputs) and sent to the external TCPM when
appropriate.
- When operating as a TCPM, it indicated that the VBUS level should be
obtained by querying the TCPC.
These two independent uses have been split into
CONFIG_USB_PD_TCPC_TRACK_VBUS and CONFIG_USB_PD_VBUS_DETECT_TCPC, which
sould be more clear.
In addition, CONFIG_USB_PD_VBUS_DETECT_* CONFIGs have been added for
other means of VBUS detection.
BUG=chromium:616580
BRANCH=None
TEST=Verify kevin continues to boot + charge.
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Change-Id: I936821481d6577e17e3e9c61ff97c037574d6923
Reviewed-on: https://chromium-review.googlesource.com/348950
Commit-Ready: Shawn N <shawnn@chromium.org>
Tested-by: Shawn N <shawnn@chromium.org>
Reviewed-by: Shawn N <shawnn@chromium.org>
Previously the maximum number of deferred routines was specified by the
the default maximum number of deferred routines you had to override
this, and if you wanted fewer, you still payed the price of having the
defer_until array statically allocated to be the maximum size.
This change removes that define and instead creates the RAM state of
the deferred routine (the time to wait until to call the deferred) when
the deferred is declared.
Signed-off-by: Anton Staaf <robotboy@chromium.org>
BRANCH=None
BUG=None
TEST=make buildall -j
manually test on discovery-stm32f072
Change-Id: Id3db84ee1795226b7818c57f68c1f637567831dc
Reviewed-on: https://chromium-review.googlesource.com/335597
Commit-Ready: Anton Staaf <robotboy@chromium.org>
Tested-by: Anton Staaf <robotboy@chromium.org>
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
Previously calls to hook_call_deferred were passed the function to call,
which was then looked up in the .rodata.deferred section with a linear
search. This linear search can be replaced with a subtract by passing
the pointer to the deferred_data object created when DECLARE_DEFERRED
was invoked.
Signed-off-by: Anton Staaf <robotboy@chromium.org>
BRANCH=None
BUG=None
CQ-DEPEND=CL:*255812
TEST=make buildall -j
Change-Id: I951dd1541302875b102dd086154cf05591694440
Reviewed-on: https://chromium-review.googlesource.com/334315
Commit-Ready: Bill Richardson <wfrichar@chromium.org>
Tested-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
With commit e9883124ff, a GPIO_INT macro was added. That change
also required that all instances of GPIO_INT in a board's
gpio.inc file come before any GPIO macros, or the interrupt
handler wouldn't work properly.
This CL just adds a warning comment about requirement to all
gpio.inc files.
BUG=chromium:471331
BRANCH=none
TEST=make buildall, test image on Cr50
This is a change to comments only. There is no new behavior to
verify, although I did run try out one new image just to be sure
nothing stupid happened.
Change-Id: I83f7819929a53bce3a8bae04d15b3ee3bda11738
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/329334
Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
On Ryu EVT2, where sensors share a 100kb i2c bus with other device,
when the sensors set to their maximal frequency and sampling interval
set to 5ms, the power management task would wait forever for the i2c
lock.
Increase the minimal amount of time the task can wait from 3ms to 8ms in
that case.
This is not an issue for Ryu PVT where the sensors are on a separate SPI
bus. However, on EVT, when setting the accelerometer/gyro over 125Hz, EC
won't be able to deliver the data in non-batched mode.
BRANCH=smaug
BUG=b:25510300
TEST=Without this change, an evt2 board would crash when plugging/unplugging
the charger while the sensors are set with:
echo 200000 > iio:device0/frequency # Accel
echo 5 > iio:device0/sampling_frequency
echo 200000 > iio:device1/frequency # Gyro
echo 25000 > iio:device2/frequency # Mag
Change-Id: Idb30da9ab8da61284388db73365c37be3a250dec
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/311755
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Some chips previously defined CONFIG_I2C and others didn't. Standardize
the usage by removing CONFIG_I2C from all config_chip files and force it
to be defined at the board level. Also, make boards define
CONFIG_I2C_MASTER and/or CONFIG_I2C_SLAVE based on the I2C interfaces
they will use - this will assist with some later cleanup.
BUG=chromium:550206
TEST=`make buildall -j`
BRANCH=None
Change-Id: I2f0970e494ea49611abc315587c7c9aa0bc2d14a
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/310070
Commit-Ready: Shawn N <shawnn@chromium.org>
Tested-by: Shawn N <shawnn@chromium.org>
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Modify the former workaround for board revisions missing an external
pull-up to 1.8V on EN_PP3300 :
the 100kOhm resistor between GPE13 and EN_PP3300 is still stuffed even
on boards which don't need the workaround, so tri-state the pin to avoid
driving the net.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BRANCH=smaug
BUG=chrome-os-partner:46799
TEST=probed EN_3300 voltage level.
Change-Id: I48f2b2fa9a716cdbe07fbc8a006ba4d3fcfaa63d
Reviewed-on: https://chromium-review.googlesource.com/307868
Reviewed-by: Todd Broch <tbroch@chromium.org>
Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
Commit-Queue: Vincent Palatin <vpalatin@chromium.org>
Tested-by: Vincent Palatin <vpalatin@chromium.org>
(cherry picked from commit 53e49d6d6541183349bb7267fa5ec2b1db250d99)
Reviewed-on: https://chromium-review.googlesource.com/308514
Commit-Ready: Vincent Palatin <vpalatin@chromium.org>
When ALS is enabled, if light is around one threshold (say 40 lux),
the lightbar will flicker between readings.
Add a histeresis to prevent the flickering.
The current setting is:
setting ^
(dim) 2 | ------+---->---+
1 | +----<---+--->---+
(bright) 0 | +---<---+---------
+-------+--------+-------+--------> lux
20 40 60
BRANCH=smaug
BUG=chrome-os-partner:44400
TEST=check in a dark room (30~40 lux) there is no flickering.
Add unit test.
Change-Id: I4018e2c2ed764abf9c9ed28e2d50a3e94a7d5f75
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/308205
Gyro and compass is suspended but still powered on.
Therefore they don't need to be reinitialized.
Note that their init() does not do much, most is done when
initializing the accelerometer part of the BMI160.
BRANCH=smaug
BUG=none
TEST=Check that Gyro: MS Done Init... message are not present
when powering up the system in a loop.
Change-Id: If92727830c32407df49213db46b1d5f1cb0369af
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/308204
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Unless the lid is closed, the ALS is used for lightbar dimming.
Change the google colors depending on the light sensor result.
BUG=chrome-os-partner:44400
BRANCH=smaug
TEST=Check all 3 levels of brightness of the lightbar.
Check value using "adb shell ectool lightbar"
Check double tap color are not affected and is using full brightness.
Change-Id: I7b5e2890c3557f1dd3ae719f5f82ffb5fe7b24fb
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/301216
Reviewed-by: Alec Berg <alecaberg@chromium.org>
When the sensor is defined to be used in forced mode, ec rate was not
calculated properly: if the AP rate was rounded up, ec_rate requested by
the AP would always be 0. If the EC rate is 0, the sensor may potientally
never be queried.
Also, when the sensor was disable for a long time, the last timestamp of
collection may appear to be in the future, so collection was not
initiated. (long time more than 35 minutes, less than 71 minutes).
We still see instance where the sensor seems locked up.
accelinit would not help because the state machine was not reseted, fix
that.
BRANCH=smaug
BUG=chrome-os-partner:45627
TEST=With accelerate 3/4, check the value is now correct.
Check proximity sensor is not stuck 45 minutes after last collection.
Change-Id: Ia6805b75f67b048cb0b42c0f91a73dfaf94a254f
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/305823
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Remove duplicate code for checking request message, but keep
a board specific check of the request message for custom checks
needed on zinger and plankton.
BUG=chrome-os-partner:42490
BRANCH=none
TEST=make -j buildall. run on samus and connect a hoho, make
sure we successfully negotiate a contract.
Change-Id: I7398953a158d340e3e113f5a816b55445a857711
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/305374
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Code for hard iron calibration: Every seconds (or faster if enough
samples), find a sphere that fit the compass data.
Based on Android code.
BRANCH=smaug
BUG=chrome-os-partner:39900
TEST=Check hard-iron bias is removed. Works better outside.
Change-Id: Iab479d5113b6560b4f01b0fd87373d2eecdb9b54
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/299583
Reviewed-by: Anton Staaf <robotboy@chromium.org>
Rereading BMM150 spec, Z axis is pointing downward, so we should set
the rotation matrix accordingly.
BRANCH=smaug
BUG=chrome-os-partner:39900
TEST=Check value from sensor. TBD
Change-Id: Ib5d224fd7c84cdeaaeac06b683d554a373550e22
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/299581
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Export the board version through the usual EC_CMD_GET_BOARD_VERSION.
Add an option to use the board-specific board_get_version() callback
rather than doing the generic GPIO binary decoding since here the
version is ternary encoded.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BRANCH=smaug
BUG=none
TEST=execute 'ectool boardversion' on the AP and see the right number.
Change-Id: I89c328573d09be02232756797ba3fdd5979b0292
Reviewed-on: https://chromium-review.googlesource.com/303368
Trybot-Ready: Vincent Palatin <vpalatin@chromium.org>
Tested-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Commit-Queue: Vincent Palatin <vpalatin@chromium.org>
(cherry picked from commit 6c620c51e5ab812b4e6751e4c630da2e6bee4b74)
Reviewed-on: https://chromium-review.googlesource.com/303803
Commit-Ready: Vincent Palatin <vpalatin@chromium.org>
Some sensors are in forced mode, motion sense must be scheduled at
their ODR. However the host may not want the data right away,
so motion task may not wake up the host that often.
Add a new variable motion_int_interval that defines the maximum interval
between FIFO host event.
BRANCH=smaug
BUG=chrome-os-partner:43800
TEST=Check that light sensor is polled at ODR frequency.
Check that when AP does not want any event, no FIFO host event are
requested.
Check CTS tests work as before.
Reenable motion_lid unit test.
Change-Id: Ie25e6cbe28fed899073856057855ffa03c0cd9fd
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/301134
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Increase the change of false positive, but make double feels like Samus:
- increase time beetwen tap to 500ms
- decrease tap threshold to 100mg (actually 62.5mg)
- increase ODR during TAP.
BRANCH=smaug
BUG=b:24440423
TEST=check Ryu and Samus side by side, their tap behavior is more
similar.
run cts -c android.hardware.cts.SingleSensorTests
Change-Id: I260ad95136cb2be71ef4d71efc4bee0b28afa8e0
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/302627
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Similar to i2c_xfer: allow access to a SPI device registers.
We assume the protocol use is set MSB bit to the offset for read
operation.
id is the index of the device in spi_devices.
BRANCH=smaug
TEST=Read/Write SPI registers.
BUG=none
Change-Id: Id4aaffbb6f514fd47086aee240b556ea23298d33
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/289857
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
spi_devices array needs the SPI master port used.
It is defined as CONFIG_, use it.
BUG=none
BRANCH=smaug
TEST=Check the sensors still work.
Change-Id: I6ce978caa32f4135dced59417a81ae280777fe57
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/302021
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
In S0, allow the host to enable/disable double tap.
Set S0 accel frequency to 100Hz to track double tap event.
BRANCH=smaug
BUG=chrome-os-partner:44754
TEST=check CTS results are identical to previous runs.
Check we can enable/disable double tap from the host.
Change-Id: Ic36bdd77005a1152fd413fb3869c8a77ef680117
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/298685
The current largest task size is not big enough,
we get stack overflow after one or several calibration requests.
BRANCH=smaug
BUG=chrome-os-partner:45570
TEST=After the change a loop of calibrate does not crash the EC.
Change-Id: I9681a890eddf274ab496e8ca6249c7ebca5edab5
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/301215
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Set USB communications capable flag in source/sink
capabilities PDO on boards that support USB. This
signals to other side that we are capable of
communication over D+/D- or SS Tx/Rx.
BUG=chrome-os-partner:34982
BRANCH=samus,smaug
TEST=load on samus, use twinkie to sniff traffic,
verify that USB comms capable bit is set in source
cap packet
Change-Id: I0f49cf19eb141512298c3439a4708c53101d674f
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/300637
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Enable charging from other dual-role devices by default.
BUG=chrome-os-partner:44958
BRANCH=smaug
TEST=tested on ryu with samus and a third party true dual-role
device.
Change-Id: I6540d00c33394eb66185bc4b5c27cf7c6b405ae8
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/297807
Reviewed-by: Shawn N <shawnn@chromium.org>
When a debug accessory is connected to the type-C port while the write
protection is enabled, put the case closed debugging in "partial" mode
rather than "full".
Update the "partial" mode to provide read-only access to the AP and EC
consoles.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BRANCH=smaug
BUG=chrome-os-partner:44700
TEST=check the EC console input/output over USB is still working with SuzyQ
on a write-protected system, verify that the console input is disabled.
Change-Id: I5baa03d6e738d06437c45469f46b286e76a755a4
Reviewed-on: https://chromium-review.googlesource.com/297141
Commit-Ready: Vincent Palatin <vpalatin@chromium.org>
Tested-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Anton Staaf <robotboy@chromium.org>
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Instead of returning the amount of light returned,
convert the data into distance (cm). It can be adjust via range.
BRANCH=smaug
BUG=chrome-os-partner:42526
TEST=check the data is usable by HAL.
Change-Id: I97510246ce054af4e61325d7e295ca09cc536457
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/296472
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Add config settings for ODR and EC rate per requestor and
per power state (1 for the AP, 3 for the EC).
This way we can finely set ec rate and ODR depending on usage.
On chromeos, AP is not setting frequency, so EC sets for different power
state. On some platform, sensors can now be suspended in S3/S5.
Allow EC oversampling when AP is only looking for a few samples.
It is useful for double tap detection where high accelerator ODR is
required.
BRANCH=ryu
TEST=Tested on Ryu
BUG=chromium:513458
Change-Id: Ic3888a749699f07b10c5da3bc07204afd4de70da
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/295637
Good rule of thumb for charger current is that it should be set
between C/20 & C/50 for the battery of the device.
For ryu its presently set at 64mA which may explain why we see
charger's status as charging even when battery is full. In any case
its well below recommendation so lets change it to something within
that.
Sampled data (see issue tracker) indicates charging current is ~256mA
when battery reaches 100% charged. Setting to 192mA (3 * 64) to error
on the side of charging slightly longer. This number is still within
termination current recommendation:
C/20 > term_current >= C/50
Note, also changing bq2589x default termination to match its POR value
of 256 as no other board uses this charger presently.
Signed-off-by: Todd Broch <tbroch@chromium.org>
BRANCH=smaug
BUG=chrome-os-partner:42848
TEST=manual, read charger IC termination register and see termination
current set to 192mA
Change-Id: I60dbb9326c3abb8091fd9ab18eda08b9eabb197b
Reviewed-on: https://chromium-review.googlesource.com/293096
Commit-Ready: Todd Broch <tbroch@chromium.org>
Tested-by: Todd Broch <tbroch@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
(cherry-pick back to ToT)
FAFT needs these buttons (VolUp and VolDown) be controllable
such that it can automate the firmware mode switching flows.
It is done by EC overwriting the GPIO values such that AP can
see the results.
BRANCH=ToT,smaug
BUG=None
TEST=AP boots into the firmware menu screen. Run the following commands
in EC console:
> btnpress voldown 1
> btnpress voldown 0 # See the next option selected, like a real button pressed
> btnpress volup 1
> btnpress volup 0 # Boot in the selected option, like a real button pressed
> btnpress volup
Button volup pressed = 0
Change-Id: I5e0b514d9986b8e5729ffd3560560d650669e0b7
Signed-off-by: Vic Yang <victoryang@google.com>
Signed-off-by: Tom Wai-Hong Tam <waihong@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/294882
Reviewed-by: Randall Spangler <rspangler@chromium.org>
(cherry picked from commit 77291b156d10f31dd059a4662aa249a8f8ea762e)
Reviewed-on: https://chromium-review.googlesource.com/295162
Hit overflow while sending autocalibrate command.
At rest, we were already close to the limit:
7 HOSTCMD 00000000 0.104035 472/488
Increase to 640 bytes.
BUG=chrome-os-partner:44381
BRANCH=ryu
TEST=Check auto calibrate works.
Change-Id: Ife014baf4316cdca952104c5158f38cd106e023f
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/295590
Reviewed-by: Sheng-liang Song <ssl@chromium.org>
Add si1141 to the list of motion sensors.
Setup IRQ line and other constants.
BRANCH=smaug
TEST=Check sensor is working
BUG=chrome-os-partner:32829
Change-Id: Ic05bc24164d067a1dee6a6241681420348d7a843
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/291336
Reviewed-by: Sheng-liang Song <ssl@chromium.org>
PD charger voltage + current can now be limited with
EC_CMD_EXTERNAL_POWER_LIMIT. The limit is automatically cleared when the
AP transitions out of S0 into S3 / suspend.
BUG=chrome-os-partner:43285
TEST=Manual on Samus w/ zinger.
- Plug zinger, verify charging at 20V/3A.
- `ectool extpwrlimit 3000 12000 --dev=1`, verify charging at 12V/3A
- `ectool extpwrlimit 1000 5000 --dev=1`, verify charging at 5V/1A
- Plug zinger into other port, verify still charging at 5V/1A
- `powerd_dbus_suspend`, verify charging at 20V/3A
- `chglim 2000 12000`, verify charging at 12V/2A
- `ectool extpwrlimit 0xffff 0xffff --dev=1`, verify charging at 20V/3A
- `chglim 1000 20000`, verify charging at 20V/1A
- `chglim`, verify charging at 20V/3A
BRANCH=ryu
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Change-Id: I6cd5377be91b3df75f99cb414fd3fa5a463b56cb
Reviewed-on: https://chromium-review.googlesource.com/293954
Reviewed-by: Todd Broch <tbroch@chromium.org>
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Move common USB charger code out of board directory including
setting VBUS supplier when VBUS changes, and initializing BC1.2
supplier types on init.
This also enables re-enabling of Pericom BC1.2 detection interrupts
when VBUS is changed on all boards that use USB_CHG task.
BUG=chrome-os-partner:42292
BRANCH=none
TEST=make -j buildall. Tested on glados and samus by plugging in
a few different chargers and making sure we charge.
Change-Id: Ib102fbf7a6aace998e6fcb6d35f3c97e5f03f5c2
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/290453
Reviewed-by: Shawn N <shawnn@chromium.org>
Reviewed-by: Rong Chang <rongchang@chromium.org>
Now that HOOK_INIT hooks are called from a task switching context, most
calls to task_start_called() should no longer be needed. This commit
removes them.
BRANCH=None
BUG=chrome-os-partner:27226
TEST=make -j buildall tests
TEST=Flash EC image onto samus and verify EC boot, AP boot, keyboard,
lid, and tap-for-battery all functional.
TEST=Flash EC image onto samus_pd and verify charging still works.
TEST=Flash EC image onto ryu(P3) and verify that EC boot.
TEST=Added ASSERT(task_start_called()) to the places where I removed
task_start_called(). Booted samus, samus_pd, cyan, and ryu with AC
inserted and verified that no ASSERT's were hit upon boot.
Change-Id: Ic12c61862e85ca3a0a295beedbb4eeee6d5e515b
Signed-off-by: Aseda Aboagye <aaboagye@google.com>
Reviewed-on: https://chromium-review.googlesource.com/285635
Tested-by: Aseda Aboagye <aaboagye@chromium.org>
Reviewed-by: Shawn N <shawnn@chromium.org>
Commit-Queue: Aseda Aboagye <aaboagye@chromium.org>
Trybot-Ready: Aseda Aboagye <aaboagye@chromium.org>
Remove the last pieces of external Sensor Hub support:
- Sensor hub UART exported over case closed debugging
- Sensor hub related GPIOs
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BRANCH=smaug
BUG=chrome-os-partner:38333
TEST=plug Suzy-Q to Smaug and test debug UARTs and SPI flashing
Change-Id: I47b42f63647735bae37b9256e2704303c48b5854
Reviewed-on: https://chromium-review.googlesource.com/290115
Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
Commit-Queue: Vincent Palatin <vpalatin@chromium.org>
Trybot-Ready: Vincent Palatin <vpalatin@chromium.org>
Tested-by: Vincent Palatin <vpalatin@chromium.org>
boards version 6 / 7 / 8 have an I2C bus to sensors.
board version 0+ has a SPI bus to sensors
On board v0, enable 3rd SPI port and use it to accel the accelerometer.
BRANCH=smaug
BUG=chrome-os-partner:42304
TEST=Check accel on SPI enabled Ryu board,
on v7 and v0 boards, check closed case debugging and type-C features
Change-Id: Ic8de2bb0f9d8a15f86a2c1ea98ef27613f090b22
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/289960
Enable 3rd SPI port and use it to accel the accelerometer.
BRANCH=smaug
BUG=chrome-os-partner:42304
TEST=Check accel on SPI enabled Ryu board.
Change-Id: If17eff36e2a3ea0fe59d6677aa41ba5f802e33b6
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/288516
We are very close from the current limit (456 bytes).
Increase the limit to 640 bytes.
BRANCH=smaug
TEST=Hit the limit while debugging, check the new limit.
BUG=none
Change-Id: I6673000bcac48b88599082eb797f0782c4fee454
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/289837
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Remove assumption of only one SPI master going to the SPI flash.
SPI3 can be used as second SPI master.
Define a new module type, SPI_FLASH, that can be turned
on/off when flash is not in used without impacting other
SPI masters.
BRANCH=smaug
BUG=chrome-os-partner:42304
TEST=Test on Ryu board.
Change-Id: Ie72471cea6f0a357ffee055a610d032580a794e7
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/288514
Allow more than one SPI master.
Add CONFIG variables to address the system SPI flash.
To have SPI master ports, spi_ports array must be defined.
BRANCH=smaug
TEST=compile
BUG=chrome-os-partner:42304
Change-Id: Id43869f648965c1582b7be1c7fb3a38f175fda95
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/288512
Commit-Queue: David James <davidjames@chromium.org>
