Fix bug on samus that the battery status doesn't always show on
lightbar when AC is plugged/unplugged. It doesn't show when the
battery is full is S3 or S5 because in these states we turn off
CHARGE_EN so that ACOK to the EC never toggles.
Instead, what we want to do is display battery status whenever the
active charge port changes. This will happen when AC is plugged or
unplugged OR if a user has AC on both ports and toggles between
them using the charge override hot-keys.
BUG=chrome-os-partner:36317
BRANCH=samus
TEST=test plugging and unplugging AC on both sides when battery is
full and unit is in S0, and when unit is in S5. also tested lightbar
flashes battery percentage when two zingers are plugged in and you
switch between them using Ctrl+Search+0|1|2.
Change-Id: I5cd7fff4f466adf857f1e63f07f3b0c7ae8422c7
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/245922
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Occasionally the charge circuit on samus gets wedged and will not
charge. This change detects when the charge circuit has failed
and automatically recovers from it. It uses the BQ PROCHOT warning
to detect the failure by setting PROCHOT to trigger when the BQ
thinks input current is higher than the input current limit. When
the failure is detected, the EC disables charging and tells PD MCU
to disable CHARGE_EN, then a couple seconds later, it re-enables
charging.
This CL also adds more communication between EC and PD for the EC
to be able to set the charge state for the PD. Valid charge states
are: No charging allowed, 5V charging only, and max charging. The
EC uses this as such:
- When the EC gets AC present interrupt, it sets off a deferred
function to change charge state to max charging after some delay
to give time for the charge circuit to settle down.
- When the EC gets AC disconnect interrupt, it disables charging
briefly, enables learn mode, and then sets 5V charging allowed.
This allows for the same starting conditions in the charge circuit
for every AC attach.
- When the EC detects a wedged charge circuit, it disables charging
and waits a few seconds before re-enabling 5V only charging.
Additionally, this change moves the charging cutoff in S3/S5/G3 when
the battery is full to the EC. With the added control for the EC
to set the PD charging state, it is more convenient for the EC to
manage cutting off charging when battery is full.
BUG=chrome-os-partner:36081
BRANCH=samus
TEST=test the basics:
- connect/disconnect zinger a bunch of times
- connect and disconnect two zingers in different order
- connect two zingers and charge override between the two
test the automatic charge wedge recover:
- wedge the charge circuit by setting charger voltage under battery
voltage: "charger voltage 7000"
- wait a few seconds for the system to recover and check it is charging
with "battery" command
test full battery charge cutoff:
- added console command to change battery soc in board/samus/extpower.c:
static int cmd_battfake(int argc, char **argv)
{
char *e;
battery_soc = strtoi(argv[1], &e, 10);
batt_soc_change();
return EC_SUCCESS;
}
DECLARE_CONSOLE_COMMAND(battfake, cmd_battfake, "", "", NULL);
- in S0, tested "battfake 100" does not disable charging.
- in G3, tested "battfake 100" disables charging and "battfake 99"
re-enables charging.
- set "battfake 100" and tested transitioning to S0 enables charging and
transitioning to S5 disables charging.
- attached two chargers and used charge override to select active port.
then toggled "battfake 100" to "battfake 99" back and forth and verified
charge override port is still the same.
test third-party 12V charger:
- plug in a bunch of times and make sure we stay at 5V for 500ms and then
transition to 12V
test with no battery:
- tested five different units with no battery and just zinger. 3/5 boot,
while the other 2 don't. But, the 2 that don't boot without battery also
can't boot w/o battery when this CL is reverted, so I don't think this
change is causing the problem, I think there is an electrical limitation.
test with EVT zinger:
- EVT zingers (P2 - C2) negotiate very quickly after connection, which
can cause INA problems w/o this CL. Tested an EVT zinger with samus and
did a bunch of connections and disconnections and verified that we always
wait at 5V for 500ms and that we don't wedge the INA circuit on connect.
test backwards compatibility:
- test new PD with old EC and make sure we can charge with zinger.
(note that if the charge circuit wedges, we won't be able to unwedge it).
- test old PD with new EC and make sure we can charge with zinger.
Change-Id: I7703b7a2ab1209d7f559b265b03517e79c74b16a
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/245253
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Add hook for battery state of charge change. Hook will be used
to cleanup the samus charging workarounds to follow.
BUG=none
BRANCH=samus
TEST=make -j buildall
Change-Id: I99cbb8264783802139cac689804b056623063695
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/245252
Reviewed-by: Shawn N <shawnn@chromium.org>
Ignore battery readings over 100%. This fixes a samus bug
where a false battery SOC reading causes charging to
stop.
BUG=chrome-os-partner:36115, chrome-os-partner:36081
BRANCH=samus
TEST=add following code to common/smart.c:
static int reset_soc;
in battery_get_params():
if (reset_soc) {
batt_new.state_of_charge = 65535;
reset_soc = 0;
}
after battery_get_params():
static int command_battsoc(int argc, char **argv)
{
reset_soc = 1;
return EC_SUCCESS;
}
DECLARE_CONSOLE_COMMAND(battsoc, command_battsoc,
"",
"",
NULL);
This changes the battery state of charge to 65535% for one
loop through charge state machine. w/o this CL, on samus the
battery stops charging when you call this, but with this CL
it is fixed.
Change-Id: I44f054a4e84260bd7cd7b77e44b1698645ab6c35
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/244346
Reviewed-by: Shawn N <shawnn@chromium.org>
When inductive charging just starts, there might be a blip on
CHARGE_DONE signal and it'd cause our charging control logic to shut
down charging. Fix this by waiting for a second before we start
monitoring CHARGE_DONE.
Also, once we see CHARGE_DONE=1 and disable charging, CHARGE_DONE will
go low. Handle this by ignoring all subsequent CHARGE_DONE change until
the next time the lid is opened.
BRANCH=Ryu
BUG=None
TEST=Pass the updated unit test.
TEST=Charge a base on Ryu P3.
Change-Id: I9d911cd689d8e88ebcd66e6eca7c86dd70704880
Signed-off-by: Vic Yang <victoryang@google.com>
Reviewed-on: https://chromium-review.googlesource.com/243365
Tested-by: Vic Yang <victoryang@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Commit-Queue: Vic Yang <victoryang@chromium.org>
Allow power button presses which turn the AP off.
TEST=Manual on Samus. Boot system with depleted battery, hit power
button at dev screen and verify AP powers off.
BUG=None
BRANCH=Samus
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Change-Id: I68c9b6c07520992ebba9dcbeccc60ebfb41ca112
Reviewed-on: https://chromium-review.googlesource.com/243710
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Current simplified implementation allows single mode entry. Specification
allows multiple mode entry and its advantageous for things like flashing RW
while staying in DisplayPort mode on video dongles.
CL adds capability on DFP to track as many alternate modes as supported by the
DFP. Initial mode entered is still the default supported mode ( 1st entry, 1st
opos). Policy manager can then use host command, EC_CMD_USB_PD_SET_AMODE, to
enter additional supported modes.
On the UFP (hoho, dingdong) a small modification to track multiple svid mode
entries was made.
Signed-off-by: Todd Broch <tbroch@chromium.org>
BRANCH=samus
BUG=chrome-os-partner:33946
TEST=manual, On hoho
1. Still successfully enter default mode DP
2. Using ectool's pdsetmode can successfully enter/exit multiple modes.
For example,
# port:1 svid:18d1 opos:1 cmd:1==enter
ectool --name cros_pd pdsetmode 1 0x18d1 1 1
Checking with pdgetmode shows both modes entered.
3. Works across hard & soft resets
4. Can flash via ectool --name cros_pd flashpd 4 <port> <RW image>
5. Still drives external display. With bootarg drm.debug=0x6 and following
command: 'tail -f /var/log/messages | grep "Received HPD" &'
I see HPD assert & deassert when switching between GFU and DP mode.
If both modes entered screen stays lit (after reboot) during write.
Change-Id: I7a21ebea377402eb1b0a0cf1d29df59694e301b1
Reviewed-on: https://chromium-review.googlesource.com/241790
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Tested-by: Todd Broch <tbroch@chromium.org>
Commit-Queue: Todd Broch <tbroch@chromium.org>
In preparation for supporting multiple mode entry this CL cleans up access to
the mode array via get_modep. Follow-on Cls will enhance that to include svid
lookup for multi-mode support.
Signed-off-by: Todd Broch <tbroch@chromium.org>
BRANCH=samus
BUG=chrome-os-partner:33946
TEST=manual, On hoho
1. Still successfully enter default mode DP
2. Using ectool's pdsetmode can successfully enter/exit
other modes (check w/ pdgetmode)
3. Works across hard & soft resets
4. Can flash via ectool --name cros_pd flashpd 4 <port> <RW image>
5. adding CONFIG_CMD_USB_PD_PE define still works for 'pe dump'
6. Still drives external display. With bootarg drm.debug=0x6 and following
command: 'tail -f /var/log/messages | grep "Received HPD" &'
I see HPD assert & deassert when switching between GFU and DP mode.
Change-Id: I7c50c76034bc0ae73b5b019361291c0ff2c21b2a
Reviewed-on: https://chromium-review.googlesource.com/241719
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Tested-by: Todd Broch <tbroch@chromium.org>
Commit-Queue: Todd Broch <tbroch@chromium.org>
Renaming this to 'opos' for consistency with USP-PD specifications
'object position' in VDM header.
Signed-off-by: Todd Broch <tbroch@chromium.org>
BRANCH=samus
BUG=chrome-os-partner:35495
TEST=manual, On hoho
1. Still successfully enter default mode DP
2. Using ectool's pdgetmode pdsetmode can successfully enter/exit
other modes
3. Works across hard & soft resets
Change-Id: I08cb8e003ced4de481adcb503bcba3437ebb1ab7
Reviewed-on: https://chromium-review.googlesource.com/241718
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Tested-by: Todd Broch <tbroch@chromium.org>
Commit-Queue: Todd Broch <tbroch@chromium.org>
Several modifications to samus fast charging to fix bug where
charging circuit stops charging the battery.
- Fix bug: if we have a bad temperature reading, fast charging should
ignore it.
- Change the fast charging high temperature profile to set a charging
voltage equal to the maximum of 8.3V and the current battery voltage.
- Divide the normal temperature profile into two phases, low voltage
charging and high voltage charging. Once we transition to second
phase, don't allow it to go back to phase 1 unless AC is removed.
On samus, we have to make sure we never command the BQ to a charging
voltage that is below the present battery voltage or else the INA will
lose power and we will not be able to charge the battery until AC
is disconnected.
This also changes charge_state_v2 so that the fast charging profile
override is called even when AC is disconnected to avoid jumps in
temperature as seen by the fast charging code.
Also changes the voltage threshold for transitioning from phase 1 to
phase 2 of normal temp charging so that the transition is taken a little
earlier to match the desired profile slightly better.
BUG=chrome-os-partner:35491
BRANCH=samus
TEST=Added custom console command to be able to directly control the
battery temperature that charger_profile_override() uses:
static int command_chgtemp(int argc, char **argv)
{
char *e;
if (argc < 2)
return EC_ERROR_PARAM_COUNT;
chg_temp = strtoi(argv[1], &e, 10);
if (*e)
return EC_ERROR_PARAM1;
return EC_SUCCESS;
}
DECLARE_CONSOLE_COMMAND(chgtemp, command_chgtemp,
"",
"",
NULL);
Using this command, I jumped back and forth between all three temperature
fast charging regions and made sure that (1) we never set a charging voltage
below the present battery voltage and (2) we never stop charging the battery.
I ran this test at low battery and high battery percentage and with low load
(G3) and high load (S0 with webgl aquarium).
Change-Id: I035603a4ab48a156ab43f8c93f21200c4b664aab
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/243143
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Change the charge override hot keys to ctrol+search+0|1|2
BUG=none
BRANCH=samus
TEST=use the hot keys and verify that the PD console shows
charge override host command
Change-Id: I5551190743ea064a967164b9d95143cc966662e1
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/242832
Reviewed-by: Shawn N <shawnn@chromium.org>
To achieve higher power efficiency, we want the input voltage to be as
low as possible. If the PD source advertise several choices over
PD_MAX_POWER_MW, choose the one with the lowest voltage.
BRANCH=Ryu
BUG=None
TEST=Plug in Ryu to Zinger and check that 12V is selected.
Change-Id: Id8c4da65bfd3dfd174e1fd5528af9f7df7da2a74
Signed-off-by: Vic Yang <victoryang@google.com>
Reviewed-on: https://chromium-review.googlesource.com/242670
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Commit-Queue: Vic Yang <victoryang@chromium.org>
Tested-by: Vic Yang <victoryang@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Currently, we only use PD_MAX_POWER_MW for battery power source and
PD_MAX_CURRENT_MA for other sources. This change makes it so that both
limits are honored no matter what the power source is.
BRANCH=Ryu
BUG=None
TEST=Set current limit to 1A on Ryu and charge from Zinger. Make sure
only 1A is pulled.
Change-Id: If9b2451f1351c6548b831d36c8162b2f86f42492
Signed-off-by: Vic Yang <victoryang@google.com>
Reviewed-on: https://chromium-review.googlesource.com/242629
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Commit-Queue: Vic Yang <victoryang@chromium.org>
Tested-by: Vic Yang <victoryang@chromium.org>
Poll USB PD accessories for event log entries only after we have
performed a Discover Identity and identified them as a Google device
(USB VID = 0x18d1) in order to avoid confusing third party devices with
our logging VDM.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BRANCH=samus
BUG=chrome-os-partner:35858
TEST=connect Zinger to Samus and see the proper PD log entries.
Change-Id: I022fa0d19dc012e46a27b786a724ff251280eeaf
Reviewed-on: https://chromium-review.googlesource.com/242871
Reviewed-by: Todd Broch <tbroch@chromium.org>
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Commit-Queue: Vincent Palatin <vpalatin@chromium.org>
Tested-by: Vincent Palatin <vpalatin@chromium.org>
Fix bug if we are executing a power swap to a sink, and we don't
get PS_RDY from port partner, then we transition to SNK_DISCONNECTED
without switching our power role to sink, which could cause us to
get wedged in the wrong state if we also receive a hard reset a
little later because we will have Rd asserted but are will transition
to source role and can never get out of it.
BUG=none
BRANCH=samus
TEST=load onto two samus' and executing a bunch of power swaps. load
custom code on one samus to never send PS_RDY when switching from sink
to source and make sure when power swap occurs the state machine does
not get wedged with the wrong role.
Change-Id: I7eb2bd4d48f32770b8d7a754fee8ac8da35fa949
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/242760
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
If our battery params seem uninitialized when calling
charge_prevent_power_on, try to retrieve them and make a decision based
upon the retrieved data. This should prevent the case where power-up is
incorrectly prevented early in the boot process.
BUG=chrome-os-partner:35762
TEST=Manual on Samus. Write protect unit and run "reboot" from the
console, verify that unit powers up. Verify that unit still correctly
prevents low-power power-on and correctly allows non-low-power power-on.
BRANCH=Samus
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Change-Id: I9030a2d5e526f4b03996a89bf2c801533683bb67
Reviewed-on: https://chromium-review.googlesource.com/242560
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Set the battery threshold for tap for battery to show red to match
the kernel percentage at which the battery icon turns red. This
threshold is 14% real battery percentage which is equivalent to 10%
battery for what the user is shown.
Note: due to rounding we may still be off, but this closes the window
at which these will differ.
BUG=chrome-os-partner:35664
BRANCH=samus
TEST=make buildall. compare to CL:48904 where we made a similar change
for the lightbar color to turn red when running.
Change-Id: I31d3c4544c57bc11967d0ba7a54d26e543f6bf5b
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/242255
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
When VBUS is initially present, we set a type-c charge_manager supplier.
Therefore, when we clear our VBUS present flag, we also need to zero our
supplier.
BUG=None
TEST=Manual on Samus. Quickly plug + unplug SDP charger, verify that pd
correctly detects that no charger is present on the board.
BRANCH=Samus
Change-Id: Ie72503f8a9b0f749b7529cfd6ff0675bd5640257
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/242092
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
For dual-role USB ports (host/device), let the AP know whether we are
currently DFP (USB host) or UFP (USB device) by exporting the data role
in addition to the power role in the EC_CMD_USB_PD_CONTROL response.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BRANCH=samus
BUG=none
TEST=ectool --name=cros_pd usbpd 0
plug various accessories on the port and see properly "SRC DFP" for the
USB key, "SNK DFP" for the power supply and "SNK UFP" for a regular
C-to-A charging cable.
Change-Id: I292da15fa8cf3566109dd05995ef1d00bed6f92d
Reviewed-on: https://chromium-review.googlesource.com/242012
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Trybot-Ready: Vincent Palatin <vpalatin@chromium.org>
Tested-by: Vincent Palatin <vpalatin@chromium.org>
Commit-Queue: Vincent Palatin <vpalatin@chromium.org>
This adds a sensor-specific attentuation factor, which will be
applied to the ALS raw sensor readings on the EC. This is to
account for the attenutation due to glass, tinting, etc.
BUG=chrome-os-partner:34590
BRANCH=ToT,Samus
TEST=manual
In a root shell, run this:
cd /sys/bus/acpi/drivers/acpi_als/ACPI0008:00/iio:device1
while true; do cat in_illuminance_raw; sleep 1 ;done
Shine a flashlight on the ALS. Note that the readings are 5X
higher than they were before this CL.
Change-Id: I2a53872ecb5fab62e5f443d43588a26d3d7e697f
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/241191
Reviewed-by: Bryan Freed <bfreed@chromium.org>
Fix bug in USB PD initialization after a sysjump. Since the CC pull
resistors weren't being initialized after a sysjump, we would sometimes
end up stuck in sink debounce state because we would have Rp applied
and our initial state of sink disconnected would think that a source
was attached. And since we continued to apply Rp, we would never make
a connection with a charger, so we would be stuck in sink debounce
until a reboot.
BUG=chrome-os-partner:35608
BRANCH=samus
TEST=load on samus and keep rebooting and sysjumping and making sure
that we don't falsely go to the sink debounce state.
Change-Id: Ic81fe02be78f3f4ffe00e3e3e378f5befe8545a5
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/241874
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Fix a couple bugs that cause problems when executing a power
swap with a poor PD connection.
1) If we are a sink switching to a source and we have turned on
vbus and then get an error, then make sure to turn off vbus.
2) If we are a sink switching to a source and we receive a
redundant PD_RDY, then ignore it.
BUG=chrome-os-partner:32392
BRANCH=samus
TEST=load on samus and connect port 0 to 1 creating a poor
PD connection with a lot of retries and missed responses. with
this change, I swapped power ~20 times with "pd 0 swap power"
and each time it was eventually successful.
Change-Id: Ib6b97961c7e40186a14ca1d2922b2ce6a6598180
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/241872
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Set the PD protocol last state to hard reset when executing a
hard reset. This fixes a bug in which if we receive a hard reset
while in one of the hard reset recovery states the last state
doesn't change, which means we don't restart timeout periods and
it is possible to be indefinitely stuck in the hard reset recovery
state until PD MCU reboots.
BUG=none
BRANCH=samus
TEST=when connecting samus port 0 to port 1 we get a very crappy
PD connection and about 1 in 5 times it causes us to get stuck in
SNK_HARD_RESET_RECOVER until a reboot. with this fix, we never get
stuck.
Change-Id: I294462ffa56a804ca613535ab9bdc466175f8066
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/241871
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Change charge_state_v2 to set the maximum input current limit when
there is no battery present AND the system is not locked. This allows
us to boot without a battery.
Note that using the max input current limit may cause us to overcurrent
our charger, but that's no worse than putting a limit on it and having
the system brownout. Either way you must have a high enough power
charger to boot without a battery.
BUG=chrome-os-partner:35570
BRANCH=samus
TEST=load on samus, remove battery and plug in zinger. check "charger"
has input current limit of 8128mA, and on PD MCU jump back and forth
between RO and RW and make sure system doesn't power off. Note that
without this CL, if you sysjump on the PD MCU it causes input current
limit to reset to 500mA and causes AP to shutoff.
Change-Id: Ie13d97a6b5c0937510cff0cf05fb032898c3b131
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/241762
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Fix some issues with how the battery present flag is reported
up to the host.
If there is no battery presence GPIO or custom function then
errors updating the smart battery info can result in the
battery present flag reporting BP_NOT_SURE and indicating to the
host that the battery is missing. In order to prevent spurious
events require a second back-to-back read of a missing battery
before the host is notified.
When the battery presence does change, the host needs to be told
to re-read the static battery info with EC_HOST_EVENT_BATTERY,
passed to the OS via Notify command to tell the OS to re-execute
_BIF/_BIX method on the ACPI battery device.
When sending these events to the host the battery flags should
first be updated in LPC shared memory so if the host handles
the event quickly it will read the correct updated flags value.
BUG=chrome-os-partner:34011
BRANCH=broadwell
TEST=manual testing on samus:
1) add a console command that allows the smart battery update
function to set batt.is_present to BP_NOT_SURE for a specified
number of update cycles.
2) ensure that when the smart battery update only returns the
battery missing for one update cycle that it does not result in
an event to the host.
3) ensure that if the smart battery update indicates the battery
is missing for more than one update cycle, such that the host is
notified the battery is missing, that it correctly gets an event
to re-read the battery info when it is indicated as present again.
Change-Id: I0da004b991ea1a89b34cd7c0f8f3628b813ffe44
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/241763
Reviewed-by: Alec Berg <alecaberg@chromium.org>
If a character is received between uart_init() and task_start(), we
shouldn't try to wake console task. Usually this shouldn't happen
because the input shouldn't be floating, but still, the EC should not
crash in this case.
BRANCH=None
BUG=chrome-os-partner:35308
TEST=Boot on Glower without servo connected. Check the LED is not
blinking.
Change-Id: I62157c3ecd50b5eca6b09c1cf594b65a605546f9
Signed-off-by: Vic Yang <victoryang@google.com>
Reviewed-on: https://chromium-review.googlesource.com/241512
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Tested-by: Vic Yang <victoryang@chromium.org>
Commit-Queue: Vic Yang <victoryang@chromium.org>
Separate macros for defining delays to turn on and off VBUS on the
Raiden ports.
Tune the delays for Samus to provide extra headroom based off of
measured worst case times.
BUG=chrome-os-partner:34525
BRANCH=samus
TEST=load onto samus. connect two samus' and use twinkie to analyze
time between request and PS_RDY on connect and then on a power swap.
Change-Id: I65cec911e34c22a4aad136423362a3a65bc2ab2a
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/241761
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Do not request a voltage that is within the deadband where we
aren't sure if the boost or the boost bypass is on.
BUG=chrome-os-partner:34938
BRANCH=samus
TEST=test on samus with zinger. change the deadband to [10V, 20V]
and see that we only negotiate to 5V. change the deadband to
[13V, 20V] and see that we negotiate to 12V. change the deadband
to [10V, 13V] and see that we negotiate to 20V.
Change-Id: Id761aef35eeadfa2ab7d2ca31a48d4324625ab32
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/241528
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
The AP informs us of the latest update image for a given device through
the EC_CMD_USB_PD_RW_HASH_ENTRY command. If the latest update image is
equivalent to our RW, we don't need to request an update.
BUG=chrome-os-partner:35510
TEST=Manual on Samus. Flash latest RW FW to Zinger. Verify that
subsequent Zinger insertion doesn't trigger the FW update host event.
Insert RO-stuck Zinger and verify that FW update host event is
triggered.
BRANCH=Samus
Change-Id: I300b150b3469e3fe32307e61273880a1a052ac5a
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/241172
Reviewed-by: Alec Berg <alecaberg@chromium.org>
More updates to connection state machine. Adds CONFIG option
for backwards compatible DFP (used on zinger), and change UFP
state machine to debounce CC while VBUS is not present.
BUG=chrome-os-partner:33680
BRANCH=samus
TEST=load on samus and zinger and connect a bunch of times. also
test samus to samus connection.
Change-Id: Ia967eb6a17b10aa0c05a30686235fbf8a24e9a7b
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/240587
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Some batteries report 0 charge when their charge level is very low.
powerd has a special interpretation of 0 charge, which causes
low-battery shutdown to not occur. Work-around this powerd behavior by
never reporting 0 charge if our battery is discharging.
BUG=chrome-os-partner:35188
TEST=Manual on Samus. Drain battery to critically low level, verify that
powerd correctly shuts down system.
BRANCH=Samus
Change-Id: I6bd50e038f0e22de7e7de754fa2ea459dc662f35
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/241101
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Certain platforms may wish to have a longer shutdown timeout, so make
the timeout a config option.
BUG=chrome-os-partner:35188
TEST=Manual on Samus with subsequent CL. Set config option to increase
timeout, verify that timeout is extended.
BRANCH=Samus
Change-Id: I69feb0d31fdc53e533671dec1e88ba96cc4553c2
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/240815
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Add the charging events to the PD event log FIFO
and add an ectool to retrieve/decode them.
BUG=chrome-os-partner:33248
TEST=Manual on Samus. Run `ectool --name cros_pd pdlog`, verify that
all log entries are dumped and the content matches expectation.
BRANCH=Samus
Change-Id: I65dd5696cc0487856ab42aff24134bcdfa1a8219
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/238093
Commit-Queue: Vincent Palatin <vpalatin@chromium.org>
Trybot-Ready: Vincent Palatin <vpalatin@chromium.org>
Tested-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Add a FIFO to log important events on the PD MCU and coming from the PD
accessories.
The retrieval of the accessories log from the accessories by the PD MCU
is not implemented yet.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BRANCH=samus
BUG=chrome-os-partner:32785
TEST=execute "ectool --name=cros_pd pdlog"
before and after plugging Zinger charger.
Change-Id: If96d73e711ff6ad64cfb99bd3e4d2d8f2643f19a
Reviewed-on: https://chromium-review.googlesource.com/238854
Tested-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Commit-Queue: Vincent Palatin <vpalatin@chromium.org>
Trybot-Ready: Vincent Palatin <vpalatin@chromium.org>
Assuming the dut has red/green battery led and a single power led
CONFIG_LED_POLICY_STD implements the chromeos spec:
* power led on in S0
* power led off in S5
* power led pulsing in S3
* battery led amber when charging
* battery led green when fully charged with AC
* battery led off when discharging
* battery led pulsing red when battery error
BUG=chrome-os-partner:35355
TEST=The Charging led behavior should match the cros spec
BRANCH=None
Change-Id: I645a939ecc2d44d73d2f52b295f9c7e8c923f77b
Signed-off-by: Alexandru M Stan <amstan@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/240705
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Shorten some PD protocol printf's to save flash space and add
port information to a handful of important ones to help find
errors when both ports are in use on samus.
BUG=none
BRANCH=samus
TEST=load onto samus and connect to zinger
Change-Id: Ieecb2a35ebb8c8275c520ad2bd3018e7608b5ecb
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/240482
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Fix bug causing firefly to disconnect when changing voltage request
too fast.
BUG=chrome-os-partner:35330
BRANCH=samus
TEST=test with firefly and zinger.
Change-Id: I6efb2f6fdd1ff64cee2cc722a538164cca946380
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/240460
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
BUG=chrome-os-partner:35312
BRANCH=none
TEST=make buildall -j
I added a debug message to nrf51/hwtimer.c to show when the timer overflowed.
"forcetime 4 0xfffff000" overflows to 5.00000000 in 4096 microseconds.
Define CONFIG_CMD_FORCETIME to enable it.
Change-Id: I30835d038ef8cd639565ffb7a638979d95d0a684
Signed-off-by: Myles Watson <mylesgw@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/239968
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Add npcx_evb in board folder for testing
Add shared-spi arch support in common layer.
Modified drivers for
1. Fan.c: console command “pwmduty”.
2. Pwm.c: for the issue when set duty to 0.
3. System.c: for hw reset only during system reset.
4. Flash.c: Fixed access denied bug of the flash driver for host command.
5. Comments from Patch Set 1
6. Comments from Patch Set 3 (except sha256.c)
7. Add openocd and flash_ec support for npcx_evb
8. Add little FW and spi-flash upload FW in chip folder
9. Add optional make rules for PROJECT_EXTRA
10.Replace CONFIG_SHRSPI_ARCH with CONFIG_CODERAM_ARCH and remove changes
in common layer sources for shared-spi arch. (except sysjump)
11.Find the root cause of JTAG issue and use workaround method
with SUPPORT_JTAG in clock.c
12 Execute hibernate in low power RAM for better power consumption
13 Add workaround method for version console command
14 Modified coding style issues by checkpatch.pl tool
BUG=chrome-os-partner:34346
TEST=make buildall -j; test nuvoton IC specific drivers
BRANCH=none
Change-Id: I5e383420642de1643e2bead837a55c8c58481786
Signed-off-by: Ian Chao <mlchao@nuvoton.com>
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/233742
