mirror of
https://github.com/Telecominfraproject/OpenCellular.git
synced 2025-12-29 18:11:05 +00:00
00ea73ab16
Add usb_i2c_board_is_enabled(). On Cr50, this is now also connected to the I2C CCD capability. The USB-I2C bridge can only be used when the capability is available. On other platforms (Servo V4, etc.) where usb_i2c_board_enable() is a no-op, add a dummy implementation which always returns true. See go/cr50-ccd-wp for more information. BUG=b:62537474 BRANCH=cr50 TEST=manual with CR50_DEV=1 Connect host PC to dev board USB port On host PC: sudo servod -c ccd_cr50.xml -c reef_r1_inas.xml dut-control pp3300_ec_shv_reg --> fail, error 0x8001 ccdoops --> reset I2C config ccd i2c disable --> I2C disabled On host PC: sudo servod -c ccd_cr50.xml -c reef_r1_inas.xml dut-control pp3300_ec_shv_reg --> fail, error 0x0006 ccd i2c enable --> I2C enabled ccdunlock --> I2C disabled ccdoops --> I2C enabled ccdset i2c unlesslocked ccdlock --> I2C disabled ccdunlock --> I2C enabled Change-Id: Ia3df32e239a5f7c5915bc6c7e408ce0dc8b26c89 Signed-off-by: Randall Spangler <rspangler@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/590577 Reviewed-by: Aseda Aboagye <aaboagye@chromium.org> Reviewed-by: Mary Ruthven <mruthven@chromium.org>
For an overview of the Embedded Controller firmware, refer to http://www.chromium.org/chromium-os/2014-firmware-summit For instructions on building from source, refer to http://www.chromium.org/chromium-os/ec-development/getting-started-building-ec-images-quickly