Gwendal Grignou cf30d5c29d driver: bma2x2: Add perform_calib ...

Add fast compensation automatic calibration, like bmi160.
Use timestamp_expired for timeout measurement for both perform_calib
functions.
Remove driver offset field, remove private bma2x2 structure.

BUG=b:73205042
BRANCH=master
TEST=echo 1 > calibrate perform calibration.
Reading in_accel_*_calibbias is within range.
Check on Lami for both bma2x2 and bmi160.

Change-Id: I3472865287fa4769a05e6f872b92d7c3f933cb4e
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/957872
Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>

2018-03-16 13:29:58 -07:00

..

battery

battery/max17055: Fix the unit of cycle count

2018-03-14 04:07:09 -07:00

bc12

bc12: add support for active low/high on all gpio signals

2018-03-09 20:05:12 -08:00

charger

charger/rt946x: Enable charge current termination

2018-03-12 20:57:02 -07:00

led

Nami: add keyboard backlight function

2018-03-02 22:22:34 -08:00

ppc

sn5s330: Disable vSafe0V interrupts

2018-02-09 16:07:10 -08:00

tcpm

tcpm/fusb302: Update VBUS supplier when VBUS level changes

2018-03-08 14:04:40 -08:00

temp_sensor

Nami: Add remote temperture 2 reading function

2018-02-27 05:14:31 -08:00

accel_bma2x2.c

driver: bma2x2: Add perform_calib

2018-03-16 13:29:58 -07:00

accel_bma2x2.h

driver: bma2x2: Add perform_calib

2018-03-16 13:29:58 -07:00

accel_kionix.c

driver: kionix: Use base accelgyro structure

2018-03-15 17:58:02 -07:00

accel_kionix.h

driver: kionix: Use base accelgyro structure

2018-03-15 17:58:02 -07:00

accel_kx022.h

sensors: add bmi160 & kionix orientation driver

2017-08-08 17:34:11 -07:00

accel_kxcj9.h

common: sensors: add extra sensor attributes

2017-05-18 21:05:23 -07:00

accel_lis2dh.c

driver: sensor: Remove set_resolution when NOOP

2018-03-15 21:23:30 -07:00

accel_lis2dh.h

motion_sense: Put set_range in common code

2017-11-17 20:18:30 -08:00

accelgyro_bmi160.c

driver: bma2x2: Add perform_calib

2018-03-16 13:29:58 -07:00

accelgyro_bmi160.h

driver: bm160: Fix minimal gyro frequency

2017-09-20 16:37:57 -07:00

accelgyro_lsm6ds0.c

driver: sensor: Remove set_resolution when NOOP

2018-03-15 21:23:30 -07:00

accelgyro_lsm6ds0.h

common: sensors: add extra sensor attributes

2017-05-18 21:05:23 -07:00

accelgyro_lsm6dsm.c

driver: sensor: Remove set_resolution when NOOP

2018-03-15 21:23:30 -07:00

accelgyro_lsm6dsm.h

driver: lsm6dsm/lsm6dsl: Fix LSM6DSM_ODR_TO_NORMALIZE macro

2017-09-20 05:50:22 -07:00

als_al3010.c

driver: add support ambient light sensor AL3010

2016-09-13 01:10:47 -07:00

als_al3010.h

driver: add support ambient light sensor AL3010

2016-09-13 01:10:47 -07:00

als_bh1730.c

motion: Add bh1730 as a motion sensor

2017-12-08 00:37:03 -08:00

als_bh1730.h

motion: Add bh1730 as a motion sensor

2017-12-08 00:37:03 -08:00

als_isl29035.c

ALS: Disable the ALS task if all the ALS inits fail

2015-10-02 12:55:51 -07:00

als_isl29035.h

ALS: Disable the ALS task if all the ALS inits fail

2015-10-02 12:55:51 -07:00

als_opt3001.c

driver: OPT3001: Re-order application of scale.

2018-03-14 04:07:08 -07:00

als_opt3001.h

OPT3001: Support MOTIONSENSE_CMD_SENSOR_[OFFSET|RANGE] for calibration.

2017-11-26 05:21:39 -08:00

als_si114x.c

motion: Lower jitter of Sensor->EC timestamp

2018-03-14 04:06:52 -07:00

als_si114x.h

driver: sensor: tune MAX_FREQ

2017-07-13 15:08:42 -07:00

baro_bmp280.c

motion_sense: Put set_range in common code

2017-11-17 20:18:30 -08:00

baro_bmp280.h

cleanup: motion_sense: Remove driver data structure externs

2017-06-15 23:54:00 -07:00

build.mk

sensors: Add driver for SYNC

2018-03-14 04:06:53 -07:00

gyro_l3gd20h.c

driver: sensor: Remove set_resolution when NOOP

2018-03-15 21:23:30 -07:00

gyro_l3gd20h.h

common: sensors: add extra sensor attributes

2017-05-18 21:05:23 -07:00

ina2xx.c

cleanup: DECLARE_CONSOLE_COMMAND only needs 4 args

2016-08-24 16:30:10 +00:00

ina2xx.h

cleanup: fix all the header guards

2015-06-18 19:07:00 +00:00

ioexpander_pca9534.c

Plankton: Add console command to reset USB hub

2014-09-23 06:28:38 +00:00

ioexpander_pca9534.h

cleanup: fix all the header guards

2015-06-18 19:07:00 +00:00

ioexpander_pca9555.h

driver: Add driver header for PCA9555 I/O port controller

2017-08-07 22:18:49 -07:00

mag_bmm150.c

driver: bmi160: Remove unnecessary delay

2016-11-21 18:22:56 -08:00

mag_bmm150.h

driver: BMM150: Set max frequency based on repetitions setting

2017-10-30 14:03:10 -07:00

mcdp28x0.c

chip/stm32/usart: Add flags to usart_config

2017-10-18 08:30:16 -07:00

mcdp28x0.h

cleanup: fix all the header guards

2015-06-18 19:07:00 +00:00

pi3usb9281.h

driver/bc12/pi3usb9281: Make a few functions static

2018-01-03 22:43:02 -08:00

pi3usb30532.h

Enforce compilation without system headers

2016-02-03 15:00:50 -08:00

pmic_tps650x30.h

meowth: zoombini: Mask off 5V PGOOD and COMP_C.

2017-12-18 20:33:00 -08:00

regulator_ir357x.c

cleanup: DECLARE_CONSOLE_COMMAND only needs 4 args

2016-08-24 16:30:10 +00:00

stm_mems_common.c

driver: sensor: Remove set_resolution when NOOP

2018-03-15 21:23:30 -07:00

stm_mems_common.h

driver: sensor: Remove set_resolution when NOOP

2018-03-15 21:23:30 -07:00

sync.c

sensors: Add driver for SYNC

2018-03-14 04:06:53 -07:00

sync.h

sensors: Add driver for SYNC

2018-03-14 04:06:53 -07:00

touchpad_elan.c

touchpad_elan: Power off when USB is suspended without wake

2018-02-05 19:08:22 -08:00

usb_mux_it5205.c

driver: add IT5205 mux driver

2017-10-31 21:49:24 -07:00

usb_mux_it5205.h

driver: add IT5205 mux driver

2017-10-31 21:49:24 -07:00

usb_mux_pi3usb30532.c

cleanup: Fix gcc 5.2.1 compile errors

2015-11-11 11:00:56 -08:00

usb_mux_ps874x.c

usb_mux: Merge PS8743 & PS8740 as PS874X

2017-08-11 20:10:23 -07:00

usb_mux_ps874x.h

usb_mux: Merge PS8743 & PS8740 as PS874X

2017-08-11 20:10:23 -07:00

usb_mux_virtual.c

kevin / gru: Notify host of HPD IRQ status

2016-08-10 20:07:32 -07:00

usb_mux.c

usb_mux: Correct an error print.

2016-08-24 17:40:52 -07:00