scottk/OpenCellular
1
0
Fork 0
mirror of https://github.com/Telecominfraproject/OpenCellular.git synced 2025-12-28 10:45:22 +00:00
Code Issues Packages Projects Releases Wiki Activity
Files
1a0235e69ff197cb1add08ffaa38ba1470db8cbc
OpenCellular/include
History
Anton Staaf 1a0235e69f Streams: Define a lower level abstraction for queue access 
This adds a new pair of interfaces called producer and consumer
which are simpler (in that they don't hold onto the underlying
queue) than the stream interfaces.  This makes it easier to
share a single queue between the endpoints that will manipulate
it.  It was not possible to share a queue between two objects
that implemented the in_stream and out_stream interfaces.

This also adds a pair of adaptors that can convert a producer
or consumer into a stream of the correct type.  These adaptors
will be used for existing code once the usb-stream and usart
drivers are converted over to use the producer/consumer
interfaces instead of the stream interfaces.

Signed-off-by: Anton Staaf <robotboy@chromium.org>

BRANCH=None
BUG=None
TEST=make buildall -j

Change-Id: I42b4b1ac15cca28e1adc6d3cea315f15e17a0b4d
Reviewed-on: https://chromium-review.googlesource.com/250941
Trybot-Ready: Anton Staaf <robotboy@chromium.org>
Tested-by: Anton Staaf <robotboy@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Commit-Queue: Anton Staaf <robotboy@chromium.org>
2015-02-24 00:27:50 +00:00
..
accelgyro.h
motion: Add decoding for MOTION_CMD_DUMP v1 command
2014-11-18 05:19:08 +00:00
acpi.h
Move ACPI stuff out of chip/lm4 and into common
2013-12-12 18:21:56 +00:00
adc.h
stm32: implement ADC support for STM32F0xx
2014-03-20 23:51:28 +00:00
als.h
samus: Add scale factor to account for ALS attenuation
2015-01-21 05:05:47 +00:00
ap_hang_detect.h
Add AP hang detection
2013-12-17 21:27:53 +00:00
backlight.h
Support backlight control via lid only
2013-09-27 23:07:21 +00:00
battery_bq27621_g1.h
battery: Add support for TI's BQ27621_g1 fuel gauge.
2014-12-31 00:01:00 +00:00
battery_smart.h
samus: Kick battery out of disconnect state when AC is attached
2014-07-23 02:29:59 +00:00
battery.h
samus: Kick battery out of disconnect state when AC is attached
2014-07-23 02:29:59 +00:00
board_config.h
Clean up board configuration
2013-04-05 14:28:42 -07:00
button.h
Samus: Support capsense input as keyboard events.
2014-02-08 04:15:39 +00:00
capsense.h
Samus: Support capsense input as keyboard events.
2014-02-08 04:15:39 +00:00
case_closed_debug.h
CCD: Remove CCD specific board connect and disconnect
2015-02-10 23:07:16 +00:00
charge_manager.h
pd_log: Add command to request PD MCU to write a log
2015-02-12 23:08:45 +00:00
charge_ramp.h
charge_ramp: initial commit of charge ramp module
2015-02-18 04:53:22 +00:00
charge_state_v1.h
Move common charge_state time constants to a common header
2014-04-11 15:37:38 +00:00
charge_state_v2.h
samus: fix charge state machine's handling of low power chargers
2014-12-15 19:53:46 +00:00
charge_state.h
charger: Make critical battery shutdown timeout a config option
2015-01-15 05:13:14 +00:00
charger.h
Add "debug" option to charge_state_v2.c
2014-05-15 05:28:08 +00:00
chipset.h
x86: generalize power state machine for all platforms (2/2)
2014-01-09 05:30:49 +00:00
clock.h
stm32: Add delay after enabling peripheral clock
2015-02-10 10:47:07 +00:00
common.h
EC: Add smbus interface read & write APIs
2014-08-29 02:57:00 +00:00
compile_time_macros.h
Improved the BUILD_ASSERT macro to work outside of functions.
2013-04-29 11:05:08 -07:00
config.h
samus_pd: make shmem command optional, disable on samus_pd
2015-02-24 00:27:42 +00:00
console.h
Samus: Split motion sense and lid angle
2014-10-29 22:23:54 +00:00
consumer.h
Streams: Define a lower level abstraction for queue access
2015-02-24 00:27:50 +00:00
crc8.h
EC: Add smbus interface read & write APIs
2014-08-29 02:57:00 +00:00
crc.h
Move software CRC implementation to common
2014-08-08 03:11:38 +00:00
dma.h
samus: pd: fix potential junk at end of tx transmission
2015-01-09 05:40:18 +00:00
dptf.h
Support DPTF charger current limiting
2014-02-08 00:14:48 +00:00
ec_commands.h
samus: panic reboot EC if PD MCU crashes
2015-02-18 04:53:59 +00:00
eeprom.h
cleanup: eeprom and option comments
2013-10-25 20:12:49 +00:00
eoption.h
Clean up a few modules in common/
2012-10-26 09:49:38 -07:00
extpower_falco.h
Rename charge_state.[ch] to charge_state_v1.[ch]
2014-03-20 23:51:00 +00:00
extpower_spring.h
cleanup: Still more TODO comments
2013-11-02 01:07:10 +00:00
extpower.h
Rename extpower_usb to extpower_spring
2013-08-28 01:54:48 +00:00
fan.h
Samus: Handle fan startup in the EC, not the fan controller
2014-11-06 02:28:22 +00:00
flash.h
Support vboot hash and system version if flash isn't memory-mapped
2015-02-05 21:03:01 +00:00
gesture.h
Samus: move gesture to common
2014-10-29 22:23:43 +00:00
gpio_list.h
Add config option to reduce GPIO name string size.
2014-12-16 22:47:50 +00:00
gpio_signal.h
gpio: Replace duplication in gpio declarations with X-macro file
2014-06-26 02:43:01 +00:00
gpio.h
cr50: Separate ARM core GPIOs from pinmux configuration
2015-02-20 03:00:04 +00:00
gpio.wrap
GPIO: Move definition of alternate functions to gpio.inc
2014-07-17 00:39:52 +00:00
hooks.h
hooks: add hook for battery state of charge change
2015-02-03 05:39:18 +00:00
host_command.h
samus: fix lightbar tap sequence doesn't always show on AC event
2015-02-04 23:32:37 +00:00
hwtimer.h
pit: Clean up timer init code
2013-06-26 09:08:23 -07:00
i2c_arbitration.h
Move I2C arbitration to its own file
2013-03-20 15:23:29 -07:00
i2c.h
EC: Add smbus interface read & write APIs
2014-08-29 02:57:00 +00:00
i8042_protocol.h
More supports for A20 enable/disable
2012-11-04 20:27:57 -08:00
in_stream.h
Stream: Add In and Out stream interfaces and config
2014-09-18 02:59:29 +00:00
inductive_charging.h
Add inductive charging control module
2014-08-25 20:52:32 +00:00
jtag.h
lm4: Use low speed clock in deep sleep.
2013-10-21 23:59:38 +00:00
keyboard_8042.h
Add support for extra buttons not on the keyboard
2014-02-07 04:13:18 +00:00
keyboard_config.h
samus: change charge override hot keys to ctrl+search+0|1|2
2015-01-24 06:42:02 +00:00
keyboard_mkbp.h
cleanup: mkbp keyboard module
2013-10-30 23:10:13 +00:00
keyboard_protocol.h
8042: Add interface for handling off-matrix button changes
2014-02-07 04:13:14 +00:00
keyboard_raw.h
Replace generated CONFIG_TASK_ macros with HAS_TASK_
2013-04-24 16:32:58 -07:00
keyboard_scan.h
Refactored keyboard scan enable flag to allow for multiple disable reasons
2014-04-11 20:02:30 +00:00
keyboard_test.h
Move keyboard dimension and key constants to keyboard_config.h
2013-03-22 11:24:29 -07:00
lb_common.h
Remove PULSE and TEST sequences from lightbar module
2014-10-08 02:50:54 +00:00
led_common.h
Peppy ectool led command
2013-08-07 12:43:48 -07:00
lid_angle.h
Convert motion sense calculations to fixed point.
2015-02-05 19:41:41 +00:00
lid_switch.h
Split lid switch code out of switch.c to its own file
2013-04-02 14:12:57 -07:00
lightbar_msg_list.h
Remove PULSE and TEST sequences from lightbar module
2014-10-08 02:50:54 +00:00
lightbar_opcode_list.h
lightbar: interpreter additions to encode other patterns
2014-10-15 18:22:37 +00:00
lightbar.h
Improve EC console messages for lightbar stuff
2014-11-21 06:23:16 +00:00
link_defs.h
hooks: add hook for battery state of charge change
2015-02-03 05:39:18 +00:00
lpc.h
baytrail: Workaround for stuck boot process
2014-04-30 10:00:02 +00:00
math_util.h
Convert motion sense calculations to fixed point.
2015-02-05 19:41:41 +00:00
memory_commands.h
Initial sources import 2/3
2011-12-07 19:10:02 +00:00
mkbp_event.h
MKBP event signalling implementation
2014-10-24 01:37:58 +00:00
module_id.h
discovery-stm32f072: Enable SPI over USB tunnel
2014-10-23 01:41:37 +00:00
motion_lid.h
Convert motion sense calculations to fixed point.
2015-02-05 19:41:41 +00:00
motion_sense.h
motion: Add decoding for MOTION_CMD_DUMP v1 command
2014-11-18 05:19:08 +00:00
onewire.h
Clean up LED and onewire modules
2012-10-25 14:12:11 -07:00
out_stream.h
OutStream: Remove unused prototypes
2015-01-07 19:44:21 +00:00
panic.h
cortex-m*: Save panicinfo on non-exception panics
2015-02-18 04:53:51 +00:00
peci.h
Switch temp sensor polling to use hooks instead of task
2012-11-01 12:45:22 -07:00
pmu_tpschrome.h
rename power_state* to charge_state*
2014-01-07 04:53:20 +00:00
port80.h
port80: Track and export last post code in previous boot
2012-08-13 14:58:38 -07:00
power_button.h
Power Button: Wait for power button to be stable when waiting for release
2015-02-10 23:07:14 +00:00
power_led.h
Replace generated CONFIG_TASK_ macros with HAS_TASK_
2013-04-24 16:32:58 -07:00
power.h
stm32l: supports fake-hibernate
2014-03-06 23:14:07 +00:00
printf.h
Clean up printf module
2012-10-25 14:12:10 -07:00
producer.h
Streams: Define a lower level abstraction for queue access
2015-02-24 00:27:50 +00:00
pwm.h
Separate fan_t from pwm_t
2013-10-30 23:10:10 +00:00
queue.h
Queue: Add methods that accept a memcpy routine
2015-01-08 00:38:13 +00:00
rsa.h
Add RW firmware signature verification for common runtime
2014-12-01 20:30:46 +00:00
sha1.h
samus: add host commands for flashing zinger RW
2014-08-26 23:06:23 +00:00
sha256.h
Clean up vboot hash support
2012-10-25 17:03:44 -07:00
shared_mem.h
Tidy shared memory module
2012-08-09 17:40:37 -07:00
smbus.h
EC: Add smbus interface read & write APIs
2014-08-29 02:57:00 +00:00
software_panic.h
samus: panic reboot EC if PD MCU crashes
2015-02-18 04:53:59 +00:00
spi_flash.h
Fix errors discovered by new compiler.
2014-11-21 02:44:47 +00:00
spi.h
mec1322: Add SPI master driver
2014-06-26 06:48:37 +00:00
stack_trace.h
emulator: Move trace dump to a separate module
2014-01-22 04:52:49 +00:00
stream_adaptor.h
Streams: Define a lower level abstraction for queue access
2015-02-24 00:27:50 +00:00
switch.h
Split x86 power button logic out of switch.c
2013-07-17 10:49:48 -07:00
system.h
nuc: Add all IC specific drivers of NPCX5M5G
2015-01-14 03:16:10 +00:00
task_id.h
Add interrupt support for emulator
2014-01-06 12:40:45 +00:00
task.h
cortex-m0: Add deferred scheduler
2015-02-12 06:44:04 +00:00
temp_sensor_chip.h
cleanup: Rename and move header files
2013-10-23 21:27:40 +00:00
temp_sensor.h
Include battery fuel gauge temp sensor in temperature sensors
2014-02-08 04:21:26 +00:00
test_util.h
Optimize memset
2014-03-01 20:15:59 +00:00
thermal.h
Show the fan-cooling percentage for each active temp sensor
2015-01-14 03:15:41 +00:00
throttle_ap.h
Add more build conditions on x86-only code.
2014-08-10 18:39:24 +00:00
timer.h
cleanup: More comments in timer.h
2013-11-21 00:09:09 +00:00
uart.h
common: Add the possibility to filter UART input
2015-02-21 00:49:36 +00:00
usb_api.h
stm32: Do not wait for USB host if USB is disabled
2014-11-21 02:44:07 +00:00
usb_bb.h
usb: Groundwork for USB BOS & Billboard class descriptors.
2014-10-11 02:22:23 +00:00
usb_charge.h
rambi: Leave 5V rail on in S3 if USB ports are powered
2014-01-23 19:32:27 +00:00
usb_console.h
ryu: Enable PD/EC console over USB
2014-11-13 03:14:37 +00:00
usb_hid.h
usb: add USB HID driver
2014-06-19 03:28:43 +00:00
usb_pd.h
charge_manager: Store dualrole capability in charge manager
2015-02-11 04:48:32 +00:00
usb.h
USB: Add memcpy_from_usbram and update existing memcpy
2015-01-08 00:38:09 +00:00
util.h
Queue: Add methods that accept a memcpy routine
2015-01-08 00:38:13 +00:00
vboot_hash.h
Invalidate hash if flash operation changes the hashed region
2012-12-10 15:14:38 -08:00
version.h
zinger: samus_pd: change zinger SW ver to report commit count
2014-08-28 20:12:52 +00:00
watchdog.h
zinger: change watchdog timeout to 1.8 second
2014-06-17 18:34:03 +00:00
wireless.h
Initial Glower commit
2015-01-20 20:56:43 +00:00