Nick Sanders 750b4525da servo_micro: add USB I2C interface ...

Add a usb endpoint and class for i2c control via USB.
Used for servo micro and servo_v4 to export USB control
through servod.

BUG=chromium:571477
BRANCH=None
TEST=updated servod is able to control gpio extender on servo_micro

Signed-off-by: Nick Sanders <nsanders@google.com>

Change-Id: Id44096f8c9e2da917c0574d28dfcbcc0adf31950
Reviewed-on: https://chromium-review.googlesource.com/329322
Commit-Ready: Nick Sanders <nsanders@chromium.org>
Tested-by: Nick Sanders <nsanders@chromium.org>
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>

2016-03-15 21:49:35 -07:00

..

adc_chip.h

stm32: implement ADC support for STM32F0xx

2014-03-20 23:51:28 +00:00

adc-stm32f0.c

stm32: adc: Add support for DMA continuous mode

2015-12-21 14:58:56 -08:00

adc-stm32f3.c

ADC: Add common priority for the ADC init

2015-07-16 05:15:22 +00:00

adc-stm32l.c

Move ADC console command to common

2013-12-20 05:07:58 +00:00

build.mk

servo_micro: add USB I2C interface

2016-03-15 21:49:35 -07:00

charger_detect.c

lucid: add support to detect BC1.2 suppliers

2016-02-26 21:22:07 -08:00

clock-stm32f0.c

stm32: Don't use HSI48 clock for chips which don't support it

2015-12-11 17:03:22 -08:00

clock-stm32f3.c

Add support for STM32F373

2014-10-07 20:58:52 +00:00

clock-stm32l.c

stm32: Add delay after enabling peripheral clock

2015-02-10 10:47:07 +00:00

config_chip.h

stm32: Don't use HSI48 clock for chips which don't support it

2015-12-11 17:03:22 -08:00

config-stm32f03x.h

cleanup: Remove redundant FLASH_SIZE CONFIGs

2015-09-16 14:49:33 -07:00

config-stm32f05x.h

stm32f05x: Use correct erase block size of 1kB

2015-10-19 15:15:36 -07:00

config-stm32f07x.h

cleanup: Remove redundant FLASH_SIZE CONFIGs

2015-09-16 14:49:33 -07:00

config-stm32f09x.h

cleanup: Remove redundant FLASH_SIZE CONFIGs

2015-09-16 14:49:33 -07:00

config-stm32f373.h

cleanup: Remove redundant FLASH_SIZE CONFIGs

2015-09-16 14:49:33 -07:00

config-stm32l15x.h

cleanup: Remove redundant FLASH_SIZE CONFIGs

2015-09-16 14:49:33 -07:00

config-stm32l100.h

cleanup: Remove redundant FLASH_SIZE CONFIGs

2015-09-16 14:49:33 -07:00

crc_hw.h

cleanup: fix all the header guards

2015-06-18 19:07:00 +00:00

debug_printf.c

stm32: add synchronous debug printf

2015-10-19 13:45:49 -07:00

debug_printf.h

stm32: add synchronous debug printf

2015-10-19 13:45:49 -07:00

dma.c

stm32: Define second DMA controller present on STM32F3

2015-07-27 22:19:21 +00:00

flash-f.c

cleanup: Rename geometry constants

2015-09-16 14:49:31 -07:00

flash-stm32f0.c

stm32f0: flash: Don't check protect bits for flash that doesn't exist

2016-01-21 12:43:04 -08:00

flash-stm32f3.c

STM32F: Remove support for this family

2015-06-30 17:18:59 +00:00

flash-stm32l.c

cleanup: Rename geometry constants

2015-09-16 14:49:31 -07:00

gpio_chip.h

GPIO: Move STM32 specific gpio_enabled_clocks

2016-03-02 20:26:20 -08:00

gpio-f0-l.c

GPIO: Move STM32 specific gpio_enabled_clocks

2016-03-02 20:26:20 -08:00

gpio-stm32f0.c

Rename gpio_is_reboot_warm() to system_is_reboot_warm()

2015-09-29 21:11:40 -07:00

gpio-stm32f3.c

Rename gpio_is_reboot_warm() to system_is_reboot_warm()

2015-09-29 21:11:40 -07:00

gpio-stm32l.c

Rename gpio_is_reboot_warm() to system_is_reboot_warm()

2015-09-29 21:11:40 -07:00

gpio.c

GPIO: Move STM32 specific gpio_enabled_clocks

2016-03-02 20:26:20 -08:00

hwtimer32.c

STM32F: Remove support for this family

2015-06-30 17:18:59 +00:00

hwtimer.c

stm32: hwtimer: Use correct TIM1 interrupt

2015-11-19 18:14:17 -08:00

i2c-stm32f0.c

stm32: i2c: Use correct timingr values based on clock source

2015-11-03 09:08:28 -08:00

i2c-stm32f3.c

Add support for STM32F373

2014-10-07 20:58:52 +00:00

i2c-stm32l.c

I2C: Remove unused arbitration support

2015-09-08 10:38:20 -07:00

jtag-stm32f0.c

stm32: add support for STM32F0xx family

2014-03-11 05:52:44 +00:00

jtag-stm32f3.c

Add support for STM32F373

2014-10-07 20:58:52 +00:00

jtag-stm32l.c

stm32: Clean up JTAG registers

2013-07-08 13:53:58 -07:00

keyboard_raw.c

stm32: invert keyboard col2 option

2014-10-02 20:51:05 +00:00

power_led.c

Remove obsolete board-specific code

2015-06-10 18:24:05 +00:00

pwm_chip.h

stm32: pwm: Allow configuration of pwm frequency + complementary outputs

2015-12-04 01:20:33 -08:00

pwm.c

stm32: pwm: Allow configuration of pwm frequency + complementary outputs

2015-12-04 01:20:33 -08:00

registers.h

lucid: add support to detect BC1.2 suppliers

2016-02-26 21:22:07 -08:00

spi_master.c

stm32: spi: Add lock around spi_transaction

2015-08-01 02:50:29 +00:00

spi.c

GPIO: Remove gpio_get_level_reg function

2016-01-27 08:44:22 -08:00

system.c

hibernate: Inform PD MCU before calling board hibernate callback

2016-02-17 15:33:07 -08:00

uart.c

stm32: Add delay after enabling peripheral clock

2015-02-10 10:47:07 +00:00

usart_info_command.c

USART: Add DMA based receiver

2015-08-24 19:08:35 +00:00

usart_rx_dma.c

USART: Add DMA based receiver

2015-08-24 19:08:35 +00:00

usart_rx_dma.h

USART: Add DMA based receiver

2015-08-24 19:08:35 +00:00

usart_rx_interrupt-stm32f0.c

USART: Split RX driver between L and F families

2015-08-10 17:54:17 +00:00

usart_rx_interrupt-stm32f3.c

USART: Split RX driver between L and F families

2015-08-10 17:54:17 +00:00

usart_rx_interrupt-stm32l.c

USART: Add DMA based receiver

2015-08-24 19:08:35 +00:00

usart_rx_interrupt.c

USART: Add DMA based receiver

2015-08-24 19:08:35 +00:00

usart_tx_dma.c

USART: Add DMA based transmitter

2015-07-21 18:30:40 +00:00

usart_tx_dma.h

USART: Add DMA based receiver

2015-08-24 19:08:35 +00:00

usart_tx_interrupt.c

USART: Add DMA based receiver

2015-08-24 19:08:35 +00:00

usart-stm32f0.c

USART: Add usart_info command

2015-08-24 19:08:30 +00:00

usart-stm32f0.h

USART: Add usart_info command

2015-08-24 19:08:30 +00:00

usart-stm32f3.c

USART: Add usart_info command

2015-08-24 19:08:30 +00:00

usart-stm32f3.h

USART: Add usart_info command

2015-08-24 19:08:30 +00:00

usart-stm32l.c

USART: Add usart_info command

2015-08-24 19:08:30 +00:00

usart-stm32l.h

USART: Add usart_info command

2015-08-24 19:08:30 +00:00

usart.c

USART: Split RX driver between L and F families

2015-08-10 17:54:17 +00:00

usart.h

USART: Add DMA based receiver

2015-08-24 19:08:35 +00:00

usb_console.c

cleanup: Rename usb.h to usb_descriptor.h

2015-11-08 17:31:11 -08:00

usb_endpoints.S

usb: fix undefined USB endpoints (bis)

2015-01-05 19:10:22 +00:00

usb_gpio.c

discovery-stm32f072: Blink the LEDs

2015-06-18 05:07:55 +00:00

usb_gpio.h

cleanup: Rename usb.h to usb_descriptor.h

2015-11-08 17:31:11 -08:00

usb_hid.c

cleanup: Rename usb.h to usb_descriptor.h

2015-11-08 17:31:11 -08:00

usb_hw.h

cleanup: Remove device-specific stuff from include/usb.h

2015-05-28 23:02:08 +00:00

usb_i2c.c

servo_micro: add USB I2C interface

2016-03-15 21:49:35 -07:00

usb_i2c.h

servo_micro: add USB I2C interface

2016-03-15 21:49:35 -07:00

usb_pd_phy.c

pd: remove unnecessary delay in phy init

2015-10-23 19:29:27 -07:00

usb_spi.c

USB: Add bounds checking to USB-SPI bridge read

2016-03-02 20:26:20 -08:00

usb_spi.h

cleanup: Rename usb.h to usb_descriptor.h

2015-11-08 17:31:11 -08:00

usb-stm32f0.c

USB: Add support for board specific connect/disconnect

2014-11-11 21:46:16 +00:00

usb-stm32f3.c

USB: Fix cut and paste bug for board specific disconnection

2015-02-10 23:07:09 +00:00

usb-stm32f3.h

USB: Add support for board specific connect/disconnect

2014-11-11 21:46:16 +00:00

usb-stm32l.c

USB: Add support for board specific connect/disconnect

2014-11-11 21:46:16 +00:00

usb-stream.c

cleanup: Rename usb.h to usb_descriptor.h

2015-11-08 17:31:11 -08:00

usb-stream.h

cleanup: Rename usb.h to usb_descriptor.h

2015-11-08 17:31:11 -08:00

usb.c

cleanup: Rename usb.h to usb_descriptor.h

2015-11-08 17:31:11 -08:00

watchdog.c

zinger: fix bug, increase watchdog timeout to 1.8s

2014-06-20 18:27:26 +00:00