Dave Parker 2b2f78d929 Console command for g781 temperature sensor. ...

Read status, set temperature alert thresholds, get and set
configuration options. I2c offsets and status/config register
bits are documented in temp_sensor_g781.h

Usage by example:
g781 - Print status info
g781 settemp 0x0e 12 - Set remote low temp alarm to 12C
g781 setbyte 0x09 0x40 - Enable single-shot mode
g781 getbyte 0xfe - Read device ID

BUG=None
BRANCH=falco,peppy
TEST=Manual. Run g781 console command

Signed-off-by: Dave Parker <dparker@chromium.org>

Change-Id: Id051f79ea643255d57c3fc694b7ae685a6611c81
Reviewed-on: https://gerrit.chromium.org/gerrit/65234
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Commit-Queue: Dave Parker <dparker@chromium.org>
Tested-by: Dave Parker <dparker@chromium.org>

2013-08-09 11:19:02 -07:00

..

backlight_x86.c

Move x86 backlight-enable passthru code to its own module

2013-07-11 16:51:39 -07:00

battery_bq20z453.c

Support battery cut-off mechanism for factory.

2012-08-28 04:39:56 -07:00

battery_falco.c

Move TPSChrome charging temperature range to battery pack

2013-07-24 13:07:13 -07:00

battery_link.c

Move TPSChrome charging temperature range to battery pack

2013-07-24 13:07:13 -07:00

battery_peppy.c

Move TPSChrome charging temperature range to battery pack

2013-07-24 13:07:13 -07:00

battery_slippy.c

Move TPSChrome charging temperature range to battery pack

2013-07-24 13:07:13 -07:00

battery_spring.c

spring: Guard battery cut-off command with lock

2013-06-05 11:25:10 -07:00

battery_wolf.c

Update Wolf from Slippy.

2013-08-08 20:29:17 -07:00

build.mk

Update Wolf from Slippy.

2013-08-08 20:29:17 -07:00

charge_state.c

x86: use charge state hook to wake up power button task

2013-08-02 17:32:42 -07:00

charger_bq24707a.c

Clean up charger config options

2013-07-23 11:14:14 -07:00

charger_bq24715.c

Clean up charger config options

2013-07-23 11:14:14 -07:00

charger_bq24725.c

Clean up charger config options

2013-07-23 11:14:14 -07:00

charger_bq24738.c

Clean up charger config options

2013-07-23 11:14:14 -07:00

charger_common.c

Constrain charging voltage to values chargers can provide.

2013-07-19 18:01:48 -07:00

chipset_gaia.c

pit: leave 1.35V rail on during warm reboot

2013-08-09 11:18:59 -07:00

chipset_haswell.c

Remove unneeded includes of registers.h

2013-08-02 17:32:25 -07:00

chipset_ivybridge.c

x86: Enable all wireless switches when going into S0

2013-07-12 16:49:14 -07:00

chipset_x86_common.c

Refactor x86 chipset code

2013-07-10 11:16:43 -07:00

chipset.c

Move common chipset console commands to chipset.c

2013-04-24 09:58:22 -07:00

console_output.c

console_output: Add commands for saving / restoring print mask.

2013-08-08 13:51:09 -07:00

console.c

Move input character processing from UART interrupt to console task

2013-08-02 17:32:26 -07:00

eoption.c

Remove unneeded direct includes of board.h and config.h

2013-07-16 12:06:30 -07:00

extpower_falco.c

Abstract polite AP throttling into a function

2013-07-31 12:33:31 -07:00

extpower_gpio.c

Move enabling AC_PRESENT interrupt to extpower_gpio.c

2013-04-02 14:12:56 -07:00

extpower_snow.c

Add common implementation for daisy/snow extpower_is_present

2013-04-03 11:49:07 -07:00

extpower_usb.c

spring: Shorten delay for charger redetect

2013-08-01 18:15:48 -07:00

firmware_image.lds.S

Make a top-level config.h file to include sub-configs

2013-07-16 12:06:31 -07:00

firmware_image.S

Make a top-level config.h file to include sub-configs

2013-07-16 12:06:31 -07:00

flash_common.c

Remove unneeded includes of registers.h

2013-08-02 17:32:25 -07:00

fmap.c

Clean up flash section defines and increase lm4 image size

2013-06-03 14:32:38 -07:00

gpio_common.c

Clean up configuring GPIO alternate functions

2013-08-07 12:43:35 -07:00

hooks.c

Add hook for changes in the charge state machine

2013-08-01 11:07:58 -07:00

host_command.c

Host commands don't set the response pointer

2013-08-02 13:05:56 -07:00

host_event_commands.c

Abstract polite AP throttling into a function

2013-07-31 12:33:31 -07:00

i2c_arbitration.c

Move I2C arbitration to its own file

2013-03-20 15:23:29 -07:00

i2c_common.c

Add build-time checks on board-specific array sizes.

2013-07-31 12:33:31 -07:00

keyboard_8042.c

Remove unneeded includes of registers.h

2013-08-02 17:32:25 -07:00

keyboard_mkbp.c

Replace generated CONFIG_TASK_ macros with HAS_TASK_

2013-04-24 16:32:58 -07:00

keyboard_scan.c

Clean up and document keyboard config options

2013-07-23 17:37:54 -07:00

keyboard_test.c

Move keyboard dimension and key constants to keyboard_config.h

2013-03-22 11:24:29 -07:00

led_common.c

Peppy ectool led command

2013-08-07 12:43:48 -07:00

led_driver_ds2413.c

Clean up onewire config options

2013-07-24 18:08:32 -07:00

led_driver_lp5562.c

Remove unneeded direct includes of board.h and config.h

2013-07-16 12:06:30 -07:00

led_falco.c

Falco: Swap battery LED colors to follow HW change

2013-07-19 18:01:57 -07:00

led_lp5562.c

spring: Show yellow LED for battery not fully charged in idle state

2013-08-01 18:15:46 -07:00

led_peppy.c

Peppy ectool led command

2013-08-07 12:43:48 -07:00

led_slippy.c

Battery LED control for Slippy

2013-07-22 15:28:58 -07:00

lid_switch.c

Add lid switch test and enable kb_mkbp test

2013-05-08 13:24:19 -07:00

lightbar.c

Split pwm.c into pwm_fan.c and pwm_kblight.c

2013-04-26 16:07:21 -07:00

main.c

Pthread-based emulator for unit testing

2013-05-07 09:09:50 -07:00

memory_commands.c

Use uintptr_t when converting integer from/to pointer

2013-05-07 20:59:53 -07:00

mock_charger.c

Move TPSChrome charging temperature range to battery pack

2013-07-24 13:07:13 -07:00

mock_i8042.c

Rename I8042CMD task to KEYPROTO

2013-03-29 15:39:32 -07:00

mock_smart_battery_stub.c

Move TPSChrome charging temperature range to battery pack

2013-07-24 13:07:13 -07:00

mock_temp_sensor.c

Add build-time checks on board-specific array sizes.

2013-07-31 12:33:31 -07:00

mock_x86_power.c

Refactor x86 chipset code

2013-07-10 11:16:43 -07:00

onewire.c

Move onewire bus support from chip/lm4 to common

2013-08-02 18:22:57 -07:00

pmu_tps65090_charger.c

Use macros for C <-> K conversions

2013-08-07 17:24:09 -07:00

pmu_tps65090_powerinfo.c

Add PMU powerinfo host command and console command

2013-07-29 11:07:31 -07:00

pmu_tps65090.c

Clean up and document PMU config options

2013-07-23 11:14:16 -07:00

port80.c

Clean up a few modules in common/

2012-10-26 09:49:38 -07:00

power_button_x86.c

x86: use charge state hook to wake up power button task

2013-08-02 17:32:42 -07:00

power_button.c

Fix leaving keyboard scanning disabled on brief power button press

2013-08-09 11:19:01 -07:00

printf.c

Clean up printf module

2012-10-25 14:12:10 -07:00

pstore_commands.c

Change host command params/response pointers to void *

2012-07-26 16:25:34 -07:00

queue.c

Only waste 1 byte in queue buffer

2013-06-10 01:48:44 -07:00

regulator_ir357x.c

Rename files in common/ to be more consistent

2013-07-08 11:30:38 -07:00

sha256.c

Clean up vboot hash support

2012-10-25 17:03:44 -07:00

shared_mem.c

Use uintptr_t when converting integer from/to pointer

2013-05-07 20:59:53 -07:00

smart_battery_stub.c

Stub smart battery read/write functions

2012-06-27 03:22:17 -07:00

smart_battery.c

Move TPSChrome charging temperature range to battery pack

2013-07-24 13:07:13 -07:00

switch.c

Move switch module from chip/lm4 to common

2013-07-17 10:49:48 -07:00

system_common.c

Pulse EC_ENTERING_RW instead of just leaving it high

2013-07-25 17:25:42 -07:00

temp_sensor_g781.c

Console command for g781 temperature sensor.

2013-08-09 11:19:02 -07:00

temp_sensor_tmp006.c

Rename files in common/ to be more consistent

2013-07-08 11:30:38 -07:00

temp_sensor.c

Use macros for C <-> K conversions

2013-08-07 17:24:09 -07:00

test_util.c

Host commands don't set the response pointer

2013-08-02 13:05:56 -07:00

thermal.c

Revert "Revert "Add thermal engine test""

2013-05-17 09:52:26 -07:00

uart_buffering.c

Move input character processing from UART interrupt to console task

2013-08-02 17:32:26 -07:00

usb_port_power_dumb.c

usb: Disable ports on entry to S5

2013-05-22 12:29:20 -07:00

usb_port_power_smart.c

Split the USB port power control into smart and dumb versions.

2013-05-01 15:36:22 -07:00

usb_switch_tsu6721.c

Remove unneeded direct includes of board.h and config.h

2013-07-16 12:06:30 -07:00

util.c

Use uintptr_t when converting integer from/to pointer

2013-05-07 20:59:53 -07:00

vboot_hash.c

Invalidate hash if flash operation changes the hashed region

2012-12-10 15:14:38 -08:00

version.c

Truncate version string to 32 characters

2013-07-19 18:01:55 -07:00

wireless.c

Split wireless power/radio control out of switch.c

2013-07-11 16:51:40 -07:00