This CL adds the driver support for the WoV module which inludes the
following files:
- wov.c
- wov_chip.h
- apm.c
- apm_chip.h
It also supports the console commad "wov" which can test different
configuration and audio quality by entering different parameters.
The detail description of WoV console command is listed below:
------------------------------------------------------------------------
[Note]: Before changing any of settings, please make sure the operation
mode is on the "OFF" state. (ie. run the command wov cfgmod off
first) .
> wov init
Initialize WoV interface, including pin mux and interrupt
registration etc.
> wov mute <enable / disable >
mute enable / disable.
> wov cfgsrc <mono | stereo | left | right>
set audio source, ex: wov cfgsrc left, means audio source from left
MIC.
> wov cfgbis <16|18|20|24>
set audio resolution, ex: wov cfgbit 16 means audio resolution are
16bits.
> wov cfgsfs <8000|12000|16000|24000|32000|48000>
set audio sampling frequency rate, ex: wov cfgsfs 48000 means audio
sampling rate are 48Khz.
> wov cfgbck <32fs|48fs|64fs|128fs|256fs>
set I2S bit clock rate, ex: wov cfgsfs 48000 and wov cfgbck 32fs
means audio sampling rate are 1536Khz (32*48000).
> wov cfgfmt <i2s|right|left|pcma|pcmb|tdm>
set I2S but format, ex: wov cfgfmt right means audio I2S format are
Right-Justify.
> wov cfgmod <off|vad|ram|i2s|rami2s>
set audio operation mode ,ex: wov cfgmod i2s means audio output via
I2S bus.
> wov cfgtdm <0~496 0~496 0~3>
set TDM time slot, the first values is left channel delay counter,
the second is right channel, and the 3rd is startup counting condition.
(chosen LRCK raising or falling edge) .
[Note: this command is just working on cfgmod equal to tdm]
> wov cfgget
retrieve above settings.
> wov vadsens
(currently not support, reserve for next version)
> wov gain (0~31)
set audio data gain value, ex: wov gain 10 means setting audio digital
gain are 10dB.
> wov cfgdck <1.0 | 2.4 | 3.0 >
set digital MIC PDM clock rate. ex: wov cfgdck 2.4 means PDM clock
are 2.4Mhz.
-----------------------------------------------------------------------
This CL also adds the chip ID (0x24) for npcx7m7w. So the console
command "version" can show the chip is npcx7m7w.
BRANCH=none
BUG=none
TEST=No build errors for make buildall.
TEST="BOARD=npcx7_evb make"; Flash the image on EVB; Test WoV function
with console commands described above.
Change-Id: Ief2b3e89edbd3e6d2a9d82d317a93c9f0b7a20cd
Signed-off-by: Dror Goldstein <dror.goldstein@nuvoton.com>
Signed-off-by: Simon Liang <CMLiang@nuvoton.com>
Signed-off-by: CHLin <CHLIN56@nuvoton.com>
Reviewed-on: https://chromium-review.googlesource.com/897314
Commit-Ready: ChromeOS CL Exonerator Bot <chromiumos-cl-exonerator@appspot.gserviceaccount.com>
Tested-by: CH Lin <chlin56@nuvoton.com>
Reviewed-by: Scott Collyer <scollyer@chromium.org>
5e614b1c98