scottk/OpenCellular
1
0
Fork 0
mirror of https://github.com/Telecominfraproject/OpenCellular.git synced 2026-01-14 00:26:30 +00:00
Code Issues Packages Projects Releases Wiki Activity
Files
36980ec169795231ba5ddaba86decb2e05512581
OpenCellular/common
History
Aseda Aboagye 36980ec169 pd: Properly assign data role on reset 
According to PD spec:
- Data role shall not be reset on soft reset.
- Data role shall be reset to power-role default on hard reset.

Implement the above. Even if both ports follow spec, it's still possible
for a data role conflict to occur if, for example, data role swap occurs
(data role mismatches power role default) followed by a hardware reset
of one port (such that data role gets reset to power role default).
Handle such cases by taking error recovery actions.

BUG=b:71333840,chromium:805040

TEST=Connect scarlet to powered Apple accessory, verify scarlet comes up
in SNK-DFP after soft reset and issuing "reboot" on EC console.  After
issuing a hard reset, the port comes up in SNK-UFP (which is the
power-role default).

BRANCH=None

Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Signed-off-by: Aseda Aboagye <aaboagye@google.com>
Change-Id: I65139f277d59a0612f8323d711080f52425ff5e7
Reviewed-on: https://chromium-review.googlesource.com/885462
Commit-Ready: Aseda Aboagye <aaboagye@chromium.org>
Tested-by: Aseda Aboagye <aaboagye@chromium.org>
Reviewed-by: Jett Rink <jettrink@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
2018-04-25 23:00:01 -07:00
..
vboot
EFS: Clarify vboot_main entry logic
2018-04-04 18:52:13 -07:00
acpi.c
battery: Allow 2 batteries to be fetched via ACPI
2018-02-09 07:55:33 -08:00
adc.c
cleanup: DECLARE_CONSOLE_COMMAND only needs 4 args
2016-08-24 16:30:10 +00:00
als.c
ec_als: ALS now uses CPRINT macros
2017-12-28 14:50:29 -08:00
ap_hang_detect.c
Code cleanup: Remove cold reset logic
2018-04-03 18:47:12 -07:00
backlight_lid.c
backlight: Adding support for active low GPIO signal
2018-01-18 05:09:37 -08:00
base32.c
common: Substitute modified CRC8 with CRC-5-USB
2017-09-12 16:17:03 -07:00
battery.c
battery: treat error codes properly
2018-04-10 19:13:11 -07:00
bluetooth_le.c
btle: Cleanup: Moved constants, renamed functions
2016-08-11 14:46:33 -07:00
btle_hci_controller.c
cleanup: DECLARE_CONSOLE_COMMAND only needs 4 args
2016-08-24 16:30:10 +00:00
btle_ll.c
btle_ll.c: Initialize variables to fix GCC warnings
2016-11-16 19:04:31 -08:00
build.mk
cr50: use run time generated public RMA key definition
2018-04-04 18:52:03 -07:00
button.c
Code cleanup: Remove cold reset logic
2018-04-03 18:47:12 -07:00
capsense.c
Deferred: Use deferred_data instead of function pointer
2016-04-18 17:32:40 -07:00
cbi.c
system: update board version to return an error if encountered
2018-04-19 12:46:14 -07:00
ccd_config.c
cr50: add vendor CCD subcommand to report CCD information
2018-04-10 16:29:16 -07:00
charge_manager.c
usbc: add config support for multiple (and no) vbus adc channels
2018-03-09 20:05:13 -08:00
charge_ramp_sw.c
chg_ramp: Add charge_is_consuming_full_input_current().
2017-11-01 16:47:21 -07:00
charge_ramp.c
charge_ramp: Ramp USB-C DTS sources
2017-10-19 12:56:42 -07:00
charge_state_v2.c
chgstv2: Check charger power in prevent_power_on.
2018-04-10 19:13:32 -07:00
charger_profile_override.c
charger_profile: support multiple battery voltage range thresholds
2017-02-10 19:02:55 -08:00
charger.c
cleanup: DECLARE_CONSOLE_COMMAND only needs 4 args
2016-08-24 16:30:10 +00:00
chipset.c
Code cleanup: Remove cold reset logic
2018-04-03 18:47:12 -07:00
clz.c
Add option to enable GCC LTO
2015-05-19 02:46:27 +00:00
console_output.c
Cr50: The chan command is not safe.
2016-10-01 03:13:43 +00:00
console.c
Fix inconsistent task function declarations
2017-08-08 14:56:13 -07:00
crc8.c
crc8: Support crc calculation across non-contiguous data
2016-03-18 22:16:53 -07:00
crc.c
ec: add crc32_ctx..() to take context parameter.
2018-02-23 23:13:01 -08:00
ctz.c
common: Add software CTZ implementation when needeed
2017-11-16 23:32:11 -08:00
curve25519-generic.c
core/cortex-m0/curve25519: Integrate fast curve25519 implementation
2017-07-03 21:44:34 -07:00
curve25519.c
core/cortex-m0/curve25519: Integrate fast curve25519 implementation
2017-07-03 21:44:34 -07:00
device_event.c
Add support for reporting device events
2017-06-30 03:08:42 -07:00
device_state.c
cr50: Clean up device state code
2017-08-08 17:34:09 -07:00
dptf.c
eve: Move DPTF tablet mode support to common code
2017-02-14 14:50:36 -08:00
ec_ec_comm_master.c
common/ec_ec_comm_master/slave: Add support for EC hibernate
2018-03-28 23:23:31 -07:00
ec_ec_comm_slave.c
common/ec_ec_comm_master/slave: Add support for EC hibernate
2018-03-28 23:23:31 -07:00
ec_features.c
Features: Add EXEC_IN_RAM
2018-04-04 18:52:15 -07:00
ec.libsharedobjs.ld
build-infr: Add support for shared RO library.
2015-07-17 03:17:50 +00:00
espi.c
espi: Add API to test if signal is eSPI virtual wire
2018-01-02 15:48:20 -08:00
event_log.c
pd_log: Make PD logging more generic for general purpose logging
2017-08-02 15:02:34 -07:00
extension.c
cr50: Allow spihash extension command over USB
2018-02-20 22:50:10 -08:00
extpower_gpio.c
extpower: Allow board to override signal debounce time
2016-09-02 07:11:33 -07:00
fan.c
fan: Allow board to configure fans at run time
2018-03-06 09:59:21 -08:00
firmware_image.lds.S
npcx: Build RW_B and support sysjump to it
2017-07-13 19:45:57 -07:00
firmware_image.S
npcx: Build RW_B and support sysjump to it
2017-07-13 19:45:57 -07:00
flash.c
flash: Allow currently active regions to be modified
2018-04-05 15:20:43 -07:00
fmap.c
EFS: Add SIG_RW_B in fmap
2018-01-10 12:58:55 -08:00
fpsensor.c
fpsensor: fix bug in fpcapture console command
2018-04-06 14:44:06 -07:00
gesture.c
Fix various misspellings in comments
2016-11-15 17:41:53 -08:00
gpio_commands.c
Cr50: Mark several console commands as safe
2016-08-31 17:20:26 +00:00
gpio.c
ec_gpio: Add GPIO power down support
2017-12-28 12:35:08 -08:00
hooks.c
stm32/usb: Add HOOK_USB_PM_CHANGE, called when USB is resumed/suspended
2018-02-02 10:17:30 -08:00
host_command_master.c
cleanup: DECLARE_CONSOLE_COMMAND only needs 4 args
2016-08-24 16:30:10 +00:00
host_command_pd.c
Fix inconsistent task function declarations
2017-08-08 14:56:13 -07:00
host_command.c
host_command: Count suppressed host commands individually
2018-02-16 21:41:41 -08:00
host_event_commands.c
host_event_commands: Fix lpc_get_next_host_event for 64-bit events
2018-04-03 01:29:12 -07:00
i2c_master.c
i2c: Use the correct config variable for i2c board callback
2018-04-04 12:05:51 -07:00
i2c_slave.c
i2c: separate slave and master code
2017-04-26 13:37:04 -07:00
i2c_wedge.c
cleanup: DECLARE_CONSOLE_COMMAND only needs 4 args
2016-08-24 16:30:10 +00:00
i2cs_tpm.c
tpm: provide means of shutting down comms layer while in reset
2017-11-07 17:52:15 -08:00
inductive_charging.c
Deferred: Use deferred_data instead of function pointer
2016-04-18 17:32:40 -07:00
keyboard_8042_sharedlib.c
keyboard_8042: Allow scancode sets to be mutable
2017-05-18 18:07:29 -07:00
keyboard_8042.c
Code cleanup: Remove cold reset logic
2018-04-03 18:47:12 -07:00
keyboard_mkbp.c
host_events: Bump up host events and masks to 64-bit
2017-11-21 18:53:35 -08:00
keyboard_scan.c
Code cleanup: Remove cold reset logic
2018-04-03 18:47:12 -07:00
keyboard_test.c
Move keyboard dimension and key constants to keyboard_config.h
2013-03-22 11:24:29 -07:00
lb_common.c
cleanup: Remove 'ryu' board
2017-09-11 11:14:24 -07:00
led_common.c
led: Only report auto control for supported LEDs.
2018-01-31 18:01:04 -08:00
led_policy_std.c
chipset: Introduce CHIPSET_STATE_ANY_SUSPEND
2017-11-28 15:44:19 -08:00
led_pwm.c
led_pwm: Add a few more features to the ledtest command
2018-02-15 21:43:53 -08:00
lid_angle.c
oak: enable lid angle update
2016-03-02 13:39:47 -08:00
lid_switch.c
whiskers: Disable keyboard/USB interface when magnet sensor active
2018-02-08 06:57:51 -08:00
lightbar.c
cleanup: DECLARE_CONSOLE_COMMAND only needs 4 args
2016-08-24 16:30:10 +00:00
mag_cal.c
common: Add magnetometer online calibration.
2015-10-13 05:28:54 -07:00
main.c
Fizz: Execute PMIC reset before vboot_main
2018-02-08 12:58:20 -08:00
mat33.c
common: Add magnetometer online calibration.
2015-10-13 05:28:54 -07:00
mat44.c
common: Add magnetometer online calibration.
2015-10-13 05:28:54 -07:00
math_util.c
math_util: Use HW instruction for int_sqrtf when available
2017-06-19 15:33:09 -07:00
memory_commands.c
Add more CONFIG_CMD_* options for console commands
2016-10-01 00:02:01 -07:00
mkbp_event.c
power: Allow host to request higher-power wakeable S3
2017-07-28 15:04:24 -07:00
motion_lid.c
motion_lid: Increase precision in noisy mag check.
2017-07-13 08:32:58 -07:00
motion_sense.c
driver: sensor: Remove set_resolution when NOOP
2018-03-15 21:23:30 -07:00
nvcounter.c
Add non-volatile flash counter
2017-06-02 10:38:57 -07:00
nvmem_vars.c
cr50: Store console lock state in NvMem vars.
2017-02-27 18:50:12 -08:00
nvmem.c
cr50: Make sure TPM wipe only clears TPM data.
2017-02-23 01:19:07 -08:00
onewire.c
Move onewire bus support from chip/lm4 to common
2013-08-02 18:22:57 -07:00
panic_output.c
panic: Set EC_HOST_EVENT_PANIC on chipset reset
2017-11-30 11:48:57 -08:00
pd_log.c
pd_log: Make PD logging more generic for general purpose logging
2017-08-02 15:02:34 -07:00
physical_presence.c
pp: add API to show when press is expected
2018-01-12 03:27:08 -08:00
port80.c
port80: Clean up macros
2017-10-31 13:04:59 -07:00
power_button_x86.c
power button: Wait for charger and battery initialization
2018-03-13 19:00:18 -07:00
power_button.c
cleanup: DECLARE_CONSOLE_COMMAND only needs 4 args
2016-08-24 16:30:10 +00:00
printf.c
Add vsnprintf function.
2018-03-20 19:30:06 -07:00
pstore_commands.c
pstore: Fix issue with block calculation for pstore blocks
2017-01-03 15:13:58 -08:00
pwm_kblight.c
cleanup: DECLARE_CONSOLE_COMMAND only needs 4 args
2016-08-24 16:30:10 +00:00
pwm.c
pwm: PWM is disabled when duty is set to max value
2016-09-08 17:57:51 -07:00
queue_policies.c
consumer: Remove flush operation
2017-12-18 20:32:58 -08:00
queue.c
Queue: Add ability to modify contiguous units inplace
2015-07-15 21:57:36 +00:00
rma_auth.c
rma: mark key ID volatile so that it can be replaced post compilation
2018-04-05 22:12:13 -07:00
rollback.c
rollback: Add function to fetch secret
2017-06-14 01:19:31 -07:00
rsa.c
common/rsa: Add support for exponent 3 RSA keys
2016-11-10 21:28:28 -08:00
rtc.c
rtc: Add functions and tests for time conversion
2017-09-26 18:24:07 -07:00
rwsig.c
Fix inconsistent task function declarations
2017-08-08 14:56:13 -07:00
sha1.c
Add SHA-1 hash
2014-05-17 20:14:17 +00:00
sha256.c
common/sha256: agressive SHA-256 unrolling as an option
2017-09-11 04:42:59 -07:00
shared_mem.c
Cr50: Mark several console commands as safe
2016-08-31 17:20:26 +00:00
shmalloc.c
fix shmem console command
2018-03-01 12:39:05 -08:00
smbus.c
smbus: Re-write smbus driver
2016-03-21 16:35:33 -07:00
spi_commands.c
cleanup: DECLARE_CONSOLE_COMMAND only needs 4 args
2016-08-24 16:30:10 +00:00
spi_flash_reg.c
ec_flash: Add W25Q128 SPI flash
2017-12-28 14:50:32 -08:00
spi_flash.c
Enable spi_flash_read to read > SPI_FLASH_MAX_READ_SIZE
2016-10-05 20:58:37 -07:00
spi_nor.c
common/spi_nor: Differential erase support
2017-02-09 05:04:56 +00:00
switch.c
Allow lid-less configuration
2017-05-09 23:20:07 -07:00
system.c
system: update board version to return an error if encountered
2018-04-19 12:46:14 -07:00
tablet_mode.c
motion: Disable tablet mode if one accel is broken
2017-01-04 18:07:12 -08:00
temp_sensor.c
cleanup: DECLARE_CONSOLE_COMMAND only needs 4 args
2016-08-24 16:30:10 +00:00
test_util.c
cleanup: DECLARE_CONSOLE_COMMAND only needs 4 args
2016-08-24 16:30:10 +00:00
thermal.c
Fizz: Modify thermal table
2017-11-06 13:48:38 -08:00
throttle_ap.c
cleanup: DECLARE_CONSOLE_COMMAND only needs 4 args
2016-08-24 16:30:10 +00:00
timer.c
Allow repeated waitms commands without resetting
2018-03-08 19:28:50 -08:00
tpm_log.c
tpm: Add optional event logging
2017-08-10 22:47:24 -07:00
tpm_registers.c
tpm: ccd: allow alternative commands when ap is held in reset
2018-02-15 21:43:57 -08:00
u2f.c
u2f: accept short APDU
2018-04-11 04:39:07 -07:00
uart_buffering.c
uart: fix compile warning when !defined CONFIG_CONSOLE_ENABLE_READ_V1
2017-05-12 13:09:54 -07:00
update_fw.c
update_fw: Store complete touchpad FW hash
2017-09-15 10:50:27 -07:00
usb_charger.c
usb_charger: initialize VBUS supplier at startup
2018-04-10 19:12:55 -07:00
usb_i2c.c
consumer: Remove flush operation
2017-12-18 20:32:58 -08:00
usb_pd_policy.c
PD: Leave Vbus ON if Vconn and Vbus Requested is set to 0 in the AMA VDO
2018-04-25 14:40:45 -07:00
usb_pd_protocol.c
pd: Properly assign data role on reset
2018-04-25 23:00:01 -07:00
usb_pd_tcpc.c
PD: Make current USB PD Stack REV 3 compliant
2017-10-24 15:30:15 -07:00
usb_port_power_dumb.c
usb_port_power: Allow variable number of ports
2017-05-01 21:54:10 -07:00
usb_port_power_smart.c
usb_port_power_smart: Add CDP/SDP only option.
2017-08-28 15:24:10 -07:00
usb_update.c
consumer: Remove flush operation
2017-12-18 20:32:58 -08:00
usbc_ppc.c
ppc: Add driver for NX20P3483
2018-03-20 19:30:17 -07:00
util.c
host_events: Bump up host events and masks to 64-bit
2017-11-21 18:53:35 -08:00
vboot_hash.c
vboot: Add error message in hash command
2017-09-29 23:25:38 -07:00
vec3.c
common: Add magnetometer online calibration.
2015-10-13 05:28:54 -07:00
version.c
common/rollback: Add support for rollback protection
2017-04-06 03:29:38 -07:00
virtual_battery.c
virtual_battery: Avoid unexpected batt_mode_cache refreshing
2017-09-25 21:06:52 -07:00
vstore.c
ec: Add temporary secure storage for the host during boot
2016-01-25 21:46:48 -08:00
webusb_desc.c
Add WebUSB descriptor support
2017-09-22 10:18:50 -07:00
wireless.c
cleanup: DECLARE_CONSOLE_COMMAND only needs 4 args
2016-08-24 16:30:10 +00:00