Caveh Jalali 0f9a4fba96 charger: set PPVAR_SYS to normal battery voltage ...

the isl9238 needs to see a higher PPVAR_SYS voltage than we were using
to avoid tripping Low_VSYS.  Low_VSYS is one of the terms causing the
isl9238 to assert PROCHOT.  its lowest default voltage threshold is
about 6.1v which is too close to the battery "minimum" that we were
using to set PPVAR_SYS.  it's better to use the "normal" battery
voltage so the running-on-AC case is similar to the running-on-battery
case.

BUG=b:78911901
BRANCH=none
TEST=examined isl9238 regs to verify it is no longer tripping Low_VSYS

Change-Id: Iafc39e988a5af668c6cc1b5485841f6d659b1e8b
Signed-off-by: Caveh Jalali <caveh@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/1043456
Commit-Ready: Caveh Jalali <caveh@google.com>
Tested-by: Caveh Jalali <caveh@google.com>
Tested-by: caveh jalali <caveh@chromium.org>
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
Reviewed-by: Caveh Jalali <caveh@google.com>

2018-05-08 01:21:59 -07:00

..

vboot

shared_mem: Assert that shared memory size is large enough

2018-05-07 20:45:54 -07:00

acpi.c

battery: Allow 2 batteries to be fetched via ACPI

2018-02-09 07:55:33 -08:00

adc.c

cleanup: DECLARE_CONSOLE_COMMAND only needs 4 args

2016-08-24 16:30:10 +00:00

als.c

ec_als: ALS now uses CPRINT macros

2017-12-28 14:50:29 -08:00

ap_hang_detect.c

Code cleanup: Remove cold reset logic

2018-04-03 18:47:12 -07:00

backlight_lid.c

backlight: Adding support for active low GPIO signal

2018-01-18 05:09:37 -08:00

base32.c

common: Substitute modified CRC8 with CRC-5-USB

2017-09-12 16:17:03 -07:00

battery.c

battery: treat error codes properly

2018-04-10 19:13:11 -07:00

bluetooth_le.c

btle: Cleanup: Moved constants, renamed functions

2016-08-11 14:46:33 -07:00

btle_hci_controller.c

cleanup: DECLARE_CONSOLE_COMMAND only needs 4 args

2016-08-24 16:30:10 +00:00

btle_ll.c

btle_ll.c: Initialize variables to fix GCC warnings

2016-11-16 19:04:31 -08:00

build.mk

Cr50: Added Pinweaver base implementation.

2018-04-27 12:22:25 -07:00

button.c

Code cleanup: Remove cold reset logic

2018-04-03 18:47:12 -07:00

capsense.c

Deferred: Use deferred_data instead of function pointer

2016-04-18 17:32:40 -07:00

cbi.c

CBI: Disallow board version and OEM ID to be reprogrammed

2018-05-04 03:02:49 -07:00

ccd_config.c

cr50: add vendor CCD subcommand to report CCD information

2018-04-10 16:29:16 -07:00

charge_manager.c

usbc: add config support for multiple (and no) vbus adc channels

2018-03-09 20:05:13 -08:00

charge_ramp_sw.c

chg_ramp: Add charge_is_consuming_full_input_current().

2017-11-01 16:47:21 -07:00

charge_ramp.c

charge_ramp: Ramp USB-C DTS sources

2017-10-19 12:56:42 -07:00

charge_state_v2.c

charger: set PPVAR_SYS to normal battery voltage

2018-05-08 01:21:59 -07:00

charger_profile_override.c

charger_profile: support multiple battery voltage range thresholds

2017-02-10 19:02:55 -08:00

charger.c

cleanup: DECLARE_CONSOLE_COMMAND only needs 4 args

2016-08-24 16:30:10 +00:00

chipset.c

Code cleanup: Remove cold reset logic

2018-04-03 18:47:12 -07:00

clz.c

Add option to enable GCC LTO

2015-05-19 02:46:27 +00:00

console_output.c

Cr50: The chan command is not safe.

2016-10-01 03:13:43 +00:00

console.c

Fix inconsistent task function declarations

2017-08-08 14:56:13 -07:00

crc8.c

crc8: Support crc calculation across non-contiguous data

2016-03-18 22:16:53 -07:00

crc.c

ec: add crc32_ctx..() to take context parameter.

2018-02-23 23:13:01 -08:00

ctz.c

common: Add software CTZ implementation when needeed

2017-11-16 23:32:11 -08:00

curve25519-generic.c

core/cortex-m0/curve25519: Integrate fast curve25519 implementation

2017-07-03 21:44:34 -07:00

curve25519.c

core/cortex-m0/curve25519: Integrate fast curve25519 implementation

2017-07-03 21:44:34 -07:00

device_event.c

Add support for reporting device events

2017-06-30 03:08:42 -07:00

device_state.c

cr50: Clean up device state code

2017-08-08 17:34:09 -07:00

dptf.c

eve: Move DPTF tablet mode support to common code

2017-02-14 14:50:36 -08:00

ec_ec_comm_master.c

common/ec_ec_comm_master/slave: Add support for EC hibernate

2018-03-28 23:23:31 -07:00

ec_ec_comm_slave.c

common/ec_ec_comm_master/slave: Add support for EC hibernate

2018-03-28 23:23:31 -07:00

ec_features.c

Features: Add EXEC_IN_RAM

2018-04-04 18:52:15 -07:00

ec.libsharedobjs.ld

build-infr: Add support for shared RO library.

2015-07-17 03:17:50 +00:00

espi.c

espi: Add API to test if signal is eSPI virtual wire

2018-01-02 15:48:20 -08:00

event_log.c

pd_log: Make PD logging more generic for general purpose logging

2017-08-02 15:02:34 -07:00

extension.c

cr50: Allow spihash extension command over USB

2018-02-20 22:50:10 -08:00

extpower_gpio.c

extpower: Allow board to override signal debounce time

2016-09-02 07:11:33 -07:00

fan.c

fan: Allow board to configure fans at run time

2018-03-06 09:59:21 -08:00

firmware_image.lds.S

npcx: Build RW_B and support sysjump to it

2017-07-13 19:45:57 -07:00

firmware_image.S

npcx: Build RW_B and support sysjump to it

2017-07-13 19:45:57 -07:00

flash.c

flash: Allow currently active regions to be modified

2018-04-05 15:20:43 -07:00

fmap.c

EFS: Add SIG_RW_B in fmap

2018-01-10 12:58:55 -08:00

fpsensor.c

fpsensor: fix bug in fpcapture console command

2018-04-06 14:44:06 -07:00

gesture.c

Fix various misspellings in comments

2016-11-15 17:41:53 -08:00

gpio_commands.c

Cr50: Mark several console commands as safe

2016-08-31 17:20:26 +00:00

gpio.c

ec_gpio: Add GPIO power down support

2017-12-28 12:35:08 -08:00

hooks.c

stm32/usb: Add HOOK_USB_PM_CHANGE, called when USB is resumed/suspended

2018-02-02 10:17:30 -08:00

host_command_master.c

cleanup: DECLARE_CONSOLE_COMMAND only needs 4 args

2016-08-24 16:30:10 +00:00

host_command_pd.c

Fix inconsistent task function declarations

2017-08-08 14:56:13 -07:00

host_command.c

shared_mem: Assert that shared memory size is large enough

2018-05-07 20:45:54 -07:00

host_event_commands.c

host_event_commands: Fix lpc_get_next_host_event for 64-bit events

2018-04-03 01:29:12 -07:00

i2c_master.c

i2c: Use the correct config variable for i2c board callback

2018-04-04 12:05:51 -07:00

i2c_slave.c

i2c: separate slave and master code

2017-04-26 13:37:04 -07:00

i2c_wedge.c

cleanup: DECLARE_CONSOLE_COMMAND only needs 4 args

2016-08-24 16:30:10 +00:00

i2cs_tpm.c

tpm: provide means of shutting down comms layer while in reset

2017-11-07 17:52:15 -08:00

inductive_charging.c

Deferred: Use deferred_data instead of function pointer

2016-04-18 17:32:40 -07:00

keyboard_8042_sharedlib.c

keyboard_8042: Allow scancode sets to be mutable

2017-05-18 18:07:29 -07:00

keyboard_8042.c

shared_mem: Assert that shared memory size is large enough

2018-05-07 20:45:54 -07:00

keyboard_mkbp.c

host_events: Bump up host events and masks to 64-bit

2017-11-21 18:53:35 -08:00

keyboard_scan.c

Code cleanup: Remove cold reset logic

2018-04-03 18:47:12 -07:00

keyboard_test.c

Move keyboard dimension and key constants to keyboard_config.h

2013-03-22 11:24:29 -07:00

lb_common.c

cleanup: Remove 'ryu' board

2017-09-11 11:14:24 -07:00

led_common.c

led: Only report auto control for supported LEDs.

2018-01-31 18:01:04 -08:00

led_policy_std.c

chipset: Introduce CHIPSET_STATE_ANY_SUSPEND

2017-11-28 15:44:19 -08:00

led_pwm.c

led_pwm: Add a few more features to the ledtest command

2018-02-15 21:43:53 -08:00

lid_angle.c

oak: enable lid angle update

2016-03-02 13:39:47 -08:00

lid_switch.c

whiskers: Disable keyboard/USB interface when magnet sensor active

2018-02-08 06:57:51 -08:00

lightbar.c

cleanup: DECLARE_CONSOLE_COMMAND only needs 4 args

2016-08-24 16:30:10 +00:00

mag_cal.c

common: Add magnetometer online calibration.

2015-10-13 05:28:54 -07:00

main.c

Fizz: Execute PMIC reset before vboot_main

2018-02-08 12:58:20 -08:00

mat33.c

common: Add magnetometer online calibration.

2015-10-13 05:28:54 -07:00

mat44.c

common: Add magnetometer online calibration.

2015-10-13 05:28:54 -07:00

math_util.c

math_util: Use HW instruction for int_sqrtf when available

2017-06-19 15:33:09 -07:00

memory_commands.c

Add more CONFIG_CMD_* options for console commands

2016-10-01 00:02:01 -07:00

mkbp_event.c

power: Allow host to request higher-power wakeable S3

2017-07-28 15:04:24 -07:00

motion_lid.c

motion_lid: Increase precision in noisy mag check.

2017-07-13 08:32:58 -07:00

motion_sense.c

driver: sensor: Remove set_resolution when NOOP

2018-03-15 21:23:30 -07:00

nvcounter.c

Add non-volatile flash counter

2017-06-02 10:38:57 -07:00

nvmem_vars.c

shared_mem: Assert that shared memory size is large enough

2018-05-07 20:45:54 -07:00

nvmem.c

cr50: Make sure TPM wipe only clears TPM data.

2017-02-23 01:19:07 -08:00

onewire.c

Move onewire bus support from chip/lm4 to common

2013-08-02 18:22:57 -07:00

panic_output.c

panic: Set EC_HOST_EVENT_PANIC on chipset reset

2017-11-30 11:48:57 -08:00

pd_log.c

pd_log: Make PD logging more generic for general purpose logging

2017-08-02 15:02:34 -07:00

physical_presence.c

pp: add API to show when press is expected

2018-01-12 03:27:08 -08:00

pinweaver.c

Cr50: Add logging functionality to PinWeaver.

2018-04-27 12:22:26 -07:00

port80.c

port80: Clean up macros

2017-10-31 13:04:59 -07:00

power_button_x86.c

power button: Ignore lid open in PWRBTN_STATE_INIT_ON

2018-04-27 12:22:41 -07:00

power_button.c

cleanup: DECLARE_CONSOLE_COMMAND only needs 4 args

2016-08-24 16:30:10 +00:00

printf.c

Add vsnprintf function.

2018-03-20 19:30:06 -07:00

pstore_commands.c

pstore: Fix issue with block calculation for pstore blocks

2017-01-03 15:13:58 -08:00

pwm_kblight.c

cleanup: DECLARE_CONSOLE_COMMAND only needs 4 args

2016-08-24 16:30:10 +00:00

pwm.c

pwm: PWM is disabled when duty is set to max value

2016-09-08 17:57:51 -07:00

queue_policies.c

consumer: Remove flush operation

2017-12-18 20:32:58 -08:00

queue.c

Queue: Add ability to modify contiguous units inplace

2015-07-15 21:57:36 +00:00

rma_auth.c

rma: mark key ID volatile so that it can be replaced post compilation

2018-04-05 22:12:13 -07:00

rollback.c

rollback: Add function to fetch secret

2017-06-14 01:19:31 -07:00

rsa.c

common/rsa: Add support for exponent 3 RSA keys

2016-11-10 21:28:28 -08:00

rtc.c

rtc: Add functions and tests for time conversion

2017-09-26 18:24:07 -07:00

rwsig.c

shared_mem: Assert that shared memory size is large enough

2018-05-07 20:45:54 -07:00

sha1.c

Add SHA-1 hash

2014-05-17 20:14:17 +00:00

sha256.c

common/sha256: agressive SHA-256 unrolling as an option

2017-09-11 04:42:59 -07:00

shared_mem.c

Cr50: Mark several console commands as safe

2016-08-31 17:20:26 +00:00

shmalloc.c

fix shmem console command

2018-03-01 12:39:05 -08:00

smbus.c

smbus: Re-write smbus driver

2016-03-21 16:35:33 -07:00

spi_commands.c

cleanup: DECLARE_CONSOLE_COMMAND only needs 4 args

2016-08-24 16:30:10 +00:00

spi_flash_reg.c

ec_flash: Add W25Q128 SPI flash

2017-12-28 14:50:32 -08:00

spi_flash.c

Enable spi_flash_read to read > SPI_FLASH_MAX_READ_SIZE

2016-10-05 20:58:37 -07:00

spi_nor.c

common/spi_nor: Differential erase support

2017-02-09 05:04:56 +00:00

switch.c

Allow lid-less configuration

2017-05-09 23:20:07 -07:00

system.c

system: update board version to return an error if encountered

2018-04-19 12:46:14 -07:00

tablet_mode.c

motion: Disable tablet mode if one accel is broken

2017-01-04 18:07:12 -08:00

temp_sensor.c

cleanup: DECLARE_CONSOLE_COMMAND only needs 4 args

2016-08-24 16:30:10 +00:00

test_util.c

cleanup: DECLARE_CONSOLE_COMMAND only needs 4 args

2016-08-24 16:30:10 +00:00

thermal.c

Fizz: Modify thermal table

2017-11-06 13:48:38 -08:00

throttle_ap.c

cleanup: DECLARE_CONSOLE_COMMAND only needs 4 args

2016-08-24 16:30:10 +00:00

timer.c

Allow repeated waitms commands without resetting

2018-03-08 19:28:50 -08:00

tpm_log.c

tpm: Add optional event logging

2017-08-10 22:47:24 -07:00

tpm_registers.c

tpm: ccd: allow alternative commands when ap is held in reset

2018-02-15 21:43:57 -08:00

u2f.c

u2f: accept short APDU

2018-04-11 04:39:07 -07:00

uart_buffering.c

uart: fix compile warning when !defined CONFIG_CONSOLE_ENABLE_READ_V1

2017-05-12 13:09:54 -07:00

update_fw.c

update_fw: Store complete touchpad FW hash

2017-09-15 10:50:27 -07:00

usb_charger.c

usb_charger: initialize VBUS supplier at startup

2018-04-10 19:12:55 -07:00

usb_i2c.c

consumer: Remove flush operation

2017-12-18 20:32:58 -08:00

usb_pd_policy.c

PD: Leave Vbus ON if Vconn and Vbus Requested is set to 0 in the AMA VDO

2018-04-25 14:40:45 -07:00

usb_pd_protocol.c

usb_pd_protocol: Add PD_ROLE_DISCONNECTED for data role swaps

2018-05-03 21:28:00 -07:00

usb_pd_tcpc.c

PD: Make current USB PD Stack REV 3 compliant

2017-10-24 15:30:15 -07:00

usb_port_power_dumb.c

usb_port_power: Allow variable number of ports

2017-05-01 21:54:10 -07:00

usb_port_power_smart.c

usb_port_power_smart: Add CDP/SDP only option.

2017-08-28 15:24:10 -07:00

usb_update.c

consumer: Remove flush operation

2017-12-18 20:32:58 -08:00

usbc_ppc.c

ppc: Add driver for NX20P3483

2018-03-20 19:30:17 -07:00

util.c

host_events: Bump up host events and masks to 64-bit

2017-11-21 18:53:35 -08:00

vboot_hash.c

shared_mem: Assert that shared memory size is large enough

2018-05-07 20:45:54 -07:00

vec3.c

common: Add magnetometer online calibration.

2015-10-13 05:28:54 -07:00

version.c

common/rollback: Add support for rollback protection

2017-04-06 03:29:38 -07:00

virtual_battery.c

virtual_battery: Avoid unexpected batt_mode_cache refreshing

2017-09-25 21:06:52 -07:00

vstore.c

ec: Add temporary secure storage for the host during boot

2016-01-25 21:46:48 -08:00

webusb_desc.c

Add WebUSB descriptor support

2017-09-22 10:18:50 -07:00

wireless.c

cleanup: DECLARE_CONSOLE_COMMAND only needs 4 args

2016-08-24 16:30:10 +00:00