Nicolas Boichat 043c550262 chip/stm32/usb_hid_touchpad: Widen pressure field to 10 bits ...

id only really needs 4 bits (16 touch events should be more than
enough), so we can steal 2 bits from that field.

We also reorder the fields to make sure that width/x are aligned
on 8-bit boundary.

BRANCH=none
BUG=b:63936194
TEST=Flash hammer, touchpad works, ABS_PRESSURE > 255 is reported
     when a palm is pressed on the touchpad.

Change-Id: I1abf1bf53cc9dd998082cea5dc7cd3be17f99ec6
Reviewed-on: https://chromium-review.googlesource.com/583297
Commit-Ready: Nicolas Boichat <drinkcat@chromium.org>
Tested-by: Nicolas Boichat <drinkcat@chromium.org>
Reviewed-by: Chun-ta Lin <itspeter@chromium.org>
Reviewed-by: KT Liao <kt.liao@emc.com.tw>

2017-07-31 07:38:06 -07:00

..

adc_chip.h

stm32: implement ADC support for STM32F0xx

2014-03-20 23:51:28 +00:00

adc-stm32f0.c

Fix various misspellings in comments

2016-11-15 17:41:53 -08:00

adc-stm32f3.c

stm32: Remove unused struct definitions

2017-01-02 14:04:10 -08:00

adc-stm32l.c

stm32: Remove unused struct definitions

2017-01-02 14:04:10 -08:00

build.mk

stm32f4: Add OTP support.

2017-07-28 17:45:13 -07:00

charger_detect.c

lucid: add support to detect BC1.2 suppliers

2016-02-26 21:22:07 -08:00

clock-f.c

stm32f4: clock stm32f412 at 96MHz

2017-06-21 01:02:59 -07:00

clock-f.h

stm32f4: clock stm32f412 at 96MHz

2017-06-21 01:02:59 -07:00

clock-stm32f0.c

usb: activate CRS on STM32F0

2017-01-26 18:43:53 -08:00

clock-stm32f3.c

Add support for STM32F373

2014-10-07 20:58:52 +00:00

clock-stm32f4.c

stm32f4: clock stm32f412 at 96MHz

2017-06-21 01:02:59 -07:00

clock-stm32l4.c

stm32f4: clock stm32f412 at 96MHz

2017-06-21 01:02:59 -07:00

clock-stm32l.c

stm32f4: clock stm32f412 at 96MHz

2017-06-21 01:02:59 -07:00

config_chip.h

rose: add stm32f4 family support

2017-03-28 11:27:57 -07:00

config-stm32f03x.h

snoball: Add support for proto 0.9 board

2016-04-19 19:19:10 -07:00

config-stm32f05x.h

stm32f05x: Use correct erase block size of 1kB

2015-10-19 15:15:36 -07:00

config-stm32f07x.h

cleanup: Remove redundant FLASH_SIZE CONFIGs

2015-09-16 14:49:33 -07:00

config-stm32f09x.h

stm32f09x: fix flash protection offset

2017-02-27 16:56:24 -08:00

config-stm32f373.h

cleanup: Remove redundant FLASH_SIZE CONFIGs

2015-09-16 14:49:33 -07:00

config-stm32f446.h

stm32f4: Add OTP support.

2017-07-28 17:45:13 -07:00

config-stm32l15x.h

cleanup: Remove redundant FLASH_SIZE CONFIGs

2015-09-16 14:49:33 -07:00

config-stm32l100.h

cleanup: Remove redundant FLASH_SIZE CONFIGs

2015-09-16 14:49:33 -07:00

config-stm32l442.h

stm32: add support for STM32L442

2017-02-17 01:47:29 -08:00

config-stm32l476.h

Bring up STM32L476G-Eval

2016-04-25 16:49:02 -07:00

crc_hw.h

cleanup: fix all the header guards

2015-06-18 19:07:00 +00:00

debug_printf.c

stm32: add synchronous debug printf

2015-10-19 13:45:49 -07:00

debug_printf.h

stm32: add synchronous debug printf

2015-10-19 13:45:49 -07:00

dma-stm32f4.c

stm32f446e-eval: add support for stm32f446

2016-08-17 16:19:07 -07:00

dma.c

stm32f446e-eval: add support for stm32f446

2016-08-17 16:19:07 -07:00

flash-f.c

chip/stm32/flash-f: Clear option byte write enable/erase operation when done

2017-07-07 02:40:03 -07:00

flash-stm32f0.c

flash: Add ROLLBACK flash region, that can be protected separately

2017-02-25 08:36:41 -08:00

flash-stm32f3.c

stm32f4: fix flash_physical_protect_now behavior

2017-06-28 00:58:59 -07:00

flash-stm32f4.c

stm32f4: fix flash_physical_protect_now behavior

2017-06-28 00:58:59 -07:00

flash-stm32l4.c

stm32: add internal flash support for STM32L4 family

2017-03-24 19:38:04 -07:00

flash-stm32l.c

flash: Pass more precise parameter to flash_[physical_]protect_at_boot

2017-02-12 21:05:11 -08:00

gpio_chip.h

GPIO: Move STM32 specific gpio_enabled_clocks

2016-03-02 20:26:20 -08:00

gpio-f0-l.c

servo_micro: add gpio mode get and set

2016-04-27 14:04:07 -07:00

gpio-stm32f0.c

Rename gpio_is_reboot_warm() to system_is_reboot_warm()

2015-09-29 21:11:40 -07:00

gpio-stm32f3.c

Rename gpio_is_reboot_warm() to system_is_reboot_warm()

2015-09-29 21:11:40 -07:00

gpio-stm32f4.c

rose: enable stm32f4 EXTI IRQs

2017-04-26 11:25:57 -07:00

gpio-stm32l4.c

stm32l4: Enable extended interrupts (EXTI)

2016-07-29 10:51:20 -07:00

gpio-stm32l.c

Rename gpio_is_reboot_warm() to system_is_reboot_warm()

2015-09-29 21:11:40 -07:00

gpio.c

stm32: gpio: implement gpio_disable_interrupt

2017-07-17 07:21:48 -07:00

hwtimer32.c

watchdog: Don't discard irqprio data due to CONFIG_LTO

2017-06-26 11:12:07 -07:00

hwtimer.c

watchdog: Don't discard irqprio data due to CONFIG_LTO

2017-06-26 11:12:07 -07:00

i2c-stm32f0.c

chip/stm32/i2c-stm32f0: Adjust 400kHz setting (48Mhz clock source)

2017-07-10 11:22:35 -07:00

i2c-stm32f3.c

Add support for STM32F373

2014-10-07 20:58:52 +00:00

i2c-stm32f4.c

stm32f4: i2c: process stop condition after slave receiver executed

2017-05-23 16:56:55 -07:00

i2c-stm32l4.c

cts: Add I2C tests for read8/16/32 and write8/16/32

2016-10-05 20:58:20 -07:00

i2c-stm32l.c

cleanup: DECLARE_CONSOLE_COMMAND only needs 4 args

2016-08-24 16:30:10 +00:00

jtag-stm32f0.c

stm32: add support for STM32F0xx family

2014-03-11 05:52:44 +00:00

jtag-stm32f3.c

Add support for STM32F373

2014-10-07 20:58:52 +00:00

jtag-stm32f4.c

stm32f446e-eval: add support for stm32f446

2016-08-17 16:19:07 -07:00

jtag-stm32l4.c

Bring up STM32L476G-Eval

2016-04-25 16:49:02 -07:00

jtag-stm32l.c

stm32: Clean up JTAG registers

2013-07-08 13:53:58 -07:00

keyboard_raw.c

stm32: invert keyboard col2 option

2014-10-02 20:51:05 +00:00

otp-stm32f4.c

stm32f4: Add OTP support.

2017-07-28 17:45:13 -07:00

power_led.c

cleanup: DECLARE_CONSOLE_COMMAND only needs 4 args

2016-08-24 16:30:10 +00:00

pwm_chip.h

stm32: pwm: Allow configuration of pwm frequency + complementary outputs

2015-12-04 01:20:33 -08:00

pwm.c

chip/stm32/pwm: Prevent sleeping while PWM output is active

2017-07-04 06:51:01 -07:00

registers.h

stm32f4: Add OTP support.

2017-07-28 17:45:13 -07:00

spi_master.c

rose: spi: add SPI master halfduplex mode

2017-05-22 05:02:46 -07:00

spi.c

eve_fp: setup SPI slave communication on STM32L442

2017-03-13 05:16:04 -07:00

stm32-dma.h

STM32: Add dma_select_channel

2016-04-25 16:49:01 -07:00

system.c

stm32: Add function to fetch unique id

2017-06-12 20:27:55 -07:00

trng.c

stm32: add TRNG support

2017-02-23 11:36:21 -08:00

uart.c

Fix various misspellings in comments

2016-11-15 17:41:53 -08:00

usart_info_command.c

cleanup: DECLARE_CONSOLE_COMMAND only needs 4 args

2016-08-24 16:30:10 +00:00

usart_rx_dma.c

USART: Add DMA based receiver

2015-08-24 19:08:35 +00:00

usart_rx_dma.h

Fix various misspellings in comments

2016-11-15 17:41:53 -08:00

usart_rx_interrupt-stm32f0.c

USART: Split RX driver between L and F families

2015-08-10 17:54:17 +00:00

usart_rx_interrupt-stm32f3.c

USART: Split RX driver between L and F families

2015-08-10 17:54:17 +00:00

usart_rx_interrupt-stm32l.c

USART: Add DMA based receiver

2015-08-24 19:08:35 +00:00

usart_rx_interrupt.c

USART: Add DMA based receiver

2015-08-24 19:08:35 +00:00

usart_tx_dma.c

USART: Add DMA based transmitter

2015-07-21 18:30:40 +00:00

usart_tx_dma.h

Fix various misspellings in comments

2016-11-15 17:41:53 -08:00

usart_tx_interrupt.c

USART: Add DMA based receiver

2015-08-24 19:08:35 +00:00

usart-stm32f0.c

Fix various misspellings in comments

2016-11-15 17:41:53 -08:00

usart-stm32f0.h

USART: Add usart_info command

2015-08-24 19:08:30 +00:00

usart-stm32f3.c

USART: Add usart_info command

2015-08-24 19:08:30 +00:00

usart-stm32f3.h

USART: Add usart_info command

2015-08-24 19:08:30 +00:00

usart-stm32l.c

USART: Add usart_info command

2015-08-24 19:08:30 +00:00

usart-stm32l.h

USART: Add usart_info command

2015-08-24 19:08:30 +00:00

usart.c

servo_micro: add parity setting

2017-07-13 17:30:40 -07:00

usart.h

servo_micro: add parity setting

2017-07-13 17:30:40 -07:00

usb_console.c

usb: Cleanup headers

2017-03-16 11:25:50 -07:00

usb_dwc_console.c

sweetberry: add usb fw update

2016-09-02 21:17:22 -07:00

usb_dwc_console.h

sweetberry: add dwc usb support

2016-09-01 22:56:22 -07:00

usb_dwc_hw.h

stm32: make usb_iface_request extern

2016-10-21 21:20:49 -07:00

usb_dwc_registers.h

sweetberry: add usb fw update

2016-09-02 21:17:22 -07:00

usb_dwc_stream.c

sweetberry: add usb fw update

2016-09-02 21:17:22 -07:00

usb_dwc_stream.h

sweetberry: add usb fw update

2016-09-02 21:17:22 -07:00

usb_dwc_update.h

sweetberry: add usb fw update

2016-09-02 21:17:22 -07:00

usb_dwc.c

Add OTP support

2017-07-28 17:45:13 -07:00

usb_endpoints.S

usb: fix undefined USB endpoints (bis)

2015-01-05 19:10:22 +00:00

usb_gpio.c

discovery-stm32f072: Blink the LEDs

2015-06-18 05:07:55 +00:00

usb_gpio.h

usb: Cleanup headers

2017-03-16 11:25:50 -07:00

usb_hid_hw.h

hammer: Make keyboard work at firmware screen

2017-05-18 06:03:52 -07:00

usb_hid_keyboard.c

hammer: Add support for new key

2017-06-02 23:59:05 -07:00

usb_hid_touchpad.c

chip/stm32/usb_hid_touchpad: Widen pressure field to 10 bits

2017-07-31 07:38:06 -07:00

usb_hid.c

hammer: Make keyboard work at firmware screen

2017-05-18 06:03:52 -07:00

usb_hw.h

chip/stm32/usb: Allow interface handler to reply with more than 64 bytes

2016-11-22 18:36:36 -08:00

usb_pd_phy.c

pd: remove unnecessary delay in phy init

2015-10-23 19:29:27 -07:00

usb_power.c

sweetberry: allow larger sense resistors

2017-07-24 22:54:04 -07:00

usb_power.h

sweetberry: add usb power logging interface

2016-11-11 17:20:19 -08:00

usb_spi.c

usb: Cleanup headers

2017-03-16 11:25:50 -07:00

usb_spi.h

usb: Cleanup headers

2017-03-16 11:25:50 -07:00

usb-stm32f0.c

stm32/usb: Add support for USB suspend

2017-03-01 07:25:03 -08:00

usb-stm32f3.c

stm32/usb: Add support for USB suspend

2017-03-01 07:25:03 -08:00

usb-stm32f3.h

USB: Add support for board specific connect/disconnect

2014-11-11 21:46:16 +00:00

usb-stm32l.c

stm32/usb: Add support for USB suspend

2017-03-01 07:25:03 -08:00

usb-stream.c

servo_micro: add parity setting

2017-07-13 17:30:40 -07:00

usb-stream.h

servo_micro: add parity setting

2017-07-13 17:30:40 -07:00

usb.c

Add OTP support

2017-07-28 17:45:13 -07:00

watchdog.c

zinger: fix bug, increase watchdog timeout to 1.8s

2014-06-20 18:27:26 +00:00