Aaron Durbin 12cee55423 system: provide optional chip_save_reset_flags() ...

Certain boards may need to handle fixing up the RESET_FLAG_s
because of the boards' designs. Provide an optional per-chip
implementation to save the reset flags. Note that this
function is not protected by a CONFIG_ option as it can just
be implemented by the chip if a board requires it. Lastly,
implement chip_save_reset_flags() for mec1322 for future use.

BUG=chrome-os-partner:44527
BRANCH=None
TEST=Built and booted on glados.

Change-Id: I604fe4e6a069f31727bab52288595a349e3dbe72
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/295115
Reviewed-by: Robbie Zhang <robbie.zhang@intel.com>
Reviewed-by: Shawn N <shawnn@chromium.org>

2015-08-26 21:50:28 -07:00

..

accelgyro.h

motion_sense: Allow multiple IRQ based sensors

2015-08-22 09:31:45 +00:00

acpi.h

Move ACPI stuff out of chip/lm4 and into common

2013-12-12 18:21:56 +00:00

adc.h

ADC: Add common priority for the ADC init

2015-07-16 05:15:22 +00:00

als.h

samus: Add scale factor to account for ALS attenuation

2015-01-21 05:05:47 +00:00

ap_hang_detect.h

Add AP hang detection

2013-12-17 21:27:53 +00:00

backlight.h

gpio: Refactor IRQ handler pointer out of gpio_list

2015-04-10 22:08:25 +00:00

battery_bq27621_g1.h

battery: Add support for TI's BQ27621_g1 fuel gauge.

2014-12-31 00:01:00 +00:00

battery_smart.h

cleanup: fix all the header guards

2015-06-18 19:07:00 +00:00

battery.h

samus: Kick battery out of disconnect state when AC is attached

2014-07-23 02:29:59 +00:00

blob.h

Cr50: Add usb_blob handler framework

2015-06-04 19:33:00 +00:00

board_config.h

Clean up board configuration

2013-04-05 14:28:42 -07:00

button.h

Samus: Support capsense input as keyboard events.

2014-02-08 04:15:39 +00:00

capsense.h

Samus: Support capsense input as keyboard events.

2014-02-08 04:15:39 +00:00

case_closed_debug.h

cleanup: fix all the header guards

2015-06-18 19:07:00 +00:00

charge_manager.h

charge_manager: Support multiple independent charge ceilings

2015-08-19 01:50:21 +00:00

charge_ramp.h

cleanup: fix all the header guards

2015-06-18 19:07:00 +00:00

charge_state_v1.h

Move common charge_state time constants to a common header

2014-04-11 15:37:38 +00:00

charge_state_v2.h

samus: fix charge state machine's handling of low power chargers

2014-12-15 19:53:46 +00:00

charge_state.h

charger: Make critical battery shutdown timeout a config option

2015-01-15 05:13:14 +00:00

charger.h

charger: Inhibit power-on until charger is initialized

2015-07-22 22:30:00 +00:00

chipset.h

gpio: Refactor IRQ handler pointer out of gpio_list

2015-04-10 22:08:25 +00:00

clock.h

stm32: Add delay after enabling peripheral clock

2015-02-10 10:47:07 +00:00

common.h

nds32: remove macro "RO"

2015-07-01 03:49:14 +00:00

compile_time_macros.h

cleanup: fix all the header guards

2015-06-18 19:07:00 +00:00

config_std_internal_flash.h

build-infr: Add support for shared RO library.

2015-07-17 03:17:50 +00:00

config.h

glados: oak: Add charger AMONBMON console command

2015-08-25 13:11:19 +00:00

console.h

tpm: add a console channel for TPM subsystem

2015-07-25 08:47:31 +00:00

consumer.h

cleanup: fix all the header guards

2015-06-18 19:07:00 +00:00

crc8.h

cleanup: fix all the header guards

2015-06-18 19:07:00 +00:00

crc.h

cleanup: fix all the header guards

2015-06-18 19:07:00 +00:00

dma.h

common: Change interface to dma_test

2015-07-27 22:19:16 +00:00

dptf.h

Support DPTF charger current limiting

2014-02-08 00:14:48 +00:00

ec_commands.h

driver: si114x: Add ALS/Proxy sensor SI114x

2015-08-22 09:31:50 +00:00

eeprom.h

cleanup: eeprom and option comments

2013-10-25 20:12:49 +00:00

eoption.h

Clean up a few modules in common/

2012-10-26 09:49:38 -07:00

extpower.h

Remove obsolete board-specific code

2015-06-10 18:24:05 +00:00

fan.h

Samus: Handle fan startup in the EC, not the fan controller

2014-11-06 02:28:22 +00:00

flash.h

cleanup: Use appropriate image geometry CONFIGs

2015-05-15 06:42:30 +00:00

gesture.h

Samus: move gesture to common

2014-10-29 22:23:43 +00:00

gpio_list.h

mec1322: Simplify GPIO lists

2015-05-27 03:58:16 +00:00

gpio_signal.h

mec1322: Simplify GPIO lists

2015-05-27 03:58:16 +00:00

gpio.h

mec1322: Allow GPIO hibernate state to be specified at board-level

2015-08-11 21:21:28 +00:00

gpio.wrap

mec1322: Simplify GPIO lists

2015-05-27 03:58:16 +00:00

hooks.h

hooks: Move HOOK_INIT to after task switching.

2015-07-13 18:43:56 +00:00

host_command.h

acpi: Ensure continuity of memmap data with a read cache

2015-07-28 21:31:38 +00:00

hwtimer.h

pit: Clean up timer init code

2013-06-26 09:08:23 -07:00

i2c_arbitration.h

Move I2C arbitration to its own file

2013-03-20 15:23:29 -07:00

i2c.h

common: Add i2c 32bit read/write

2015-06-17 13:10:58 +00:00

i8042_protocol.h

More supports for A20 enable/disable

2012-11-04 20:27:57 -08:00

inductive_charging.h

cleanup: fix all the header guards

2015-06-18 19:07:00 +00:00

jtag.h

gpio: Refactor IRQ handler pointer out of gpio_list

2015-04-10 22:08:25 +00:00

keyboard_8042_sharedlib.h

libsharedobjs: Add 8042 scancodes to shared lib.

2015-07-17 03:18:03 +00:00

keyboard_8042.h

Add support for extra buttons not on the keyboard

2014-02-07 04:13:18 +00:00

keyboard_config.h

samus: change charge override hot keys to ctrl+search+0|1|2

2015-01-24 06:42:02 +00:00

keyboard_mkbp.h

cleanup: mkbp keyboard module

2013-10-30 23:10:13 +00:00

keyboard_protocol.h

8042: Add interface for handling off-matrix button changes

2014-02-07 04:13:14 +00:00

keyboard_raw.h

gpio: Refactor IRQ handler pointer out of gpio_list

2015-04-10 22:08:25 +00:00

keyboard_scan.h

Refactored keyboard scan enable flag to allow for multiple disable reasons

2014-04-11 20:02:30 +00:00

keyboard_test.h

Move keyboard dimension and key constants to keyboard_config.h

2013-03-22 11:24:29 -07:00

lb_common.h

Remove PULSE and TEST sequences from lightbar module

2014-10-08 02:50:54 +00:00

led_common.h

Peppy ectool led command

2013-08-07 12:43:48 -07:00

libsharedobjs.h

libsharedobjs: Add libsharedobjs.h.

2015-07-17 03:17:57 +00:00

lid_angle.h

Cyan: Added Clamshell/Tablet mode support

2015-08-10 20:42:18 +00:00

lid_switch.h

Split lid switch code out of switch.c to its own file

2013-04-02 14:12:57 -07:00

lightbar_msg_list.h

Remove PULSE and TEST sequences from lightbar module

2014-10-08 02:50:54 +00:00

lightbar_opcode_list.h

lightbar: interpreter additions to encode other patterns

2014-10-15 18:22:37 +00:00

lightbar.h

Improve EC console messages for lightbar stuff

2014-11-21 06:23:16 +00:00

link_defs.h

common: Add i2c 32bit read/write

2015-06-17 13:10:58 +00:00

lpc.h

Fix assertion crash in __wait_evt()

2015-06-25 17:21:50 +00:00

math_util.h

math: Add inverse matrix calculation

2015-08-24 19:08:20 +00:00

memory_commands.h

Initial sources import 2/3

2011-12-07 19:10:02 +00:00

mkbp_event.h

MKBP event signalling implementation

2014-10-24 01:37:58 +00:00

module_id.h

stm32: Enable 3rd SPI interface

2015-07-30 19:58:09 +00:00

motion_lid.h

motion_sense: Add required header

2015-03-06 08:48:39 +00:00

motion_sense.h

motion_sense: calculate threshold properly

2015-08-24 19:08:15 +00:00

onewire.h

Clean up LED and onewire modules

2012-10-25 14:12:11 -07:00

panic.h

lm4: stm32: Store panic data in backup registers on hard reset

2015-03-14 03:22:37 +00:00

peci.h

Switch temp sensor polling to use hooks instead of task

2012-11-01 12:45:22 -07:00

pmu_tpschrome.h

cleanup: fix all the header guards

2015-06-18 19:07:00 +00:00

port80.h

mec1322: Added task-based Port80 POST code support.

2015-04-27 23:29:30 +00:00

power_button.h

skylake: Use a simulated power button press to force-shutdown the AP

2015-06-04 01:15:55 +00:00

power_led.h

Replace generated CONFIG_TASK_ macros with HAS_TASK_

2013-04-24 16:32:58 -07:00

power.h

Braswell: Added SOC G3 / Pseudo G3 support

2015-07-14 07:35:27 +00:00

printf.h

Clean up printf module

2012-10-25 14:12:10 -07:00

producer.h

cleanup: fix all the header guards

2015-06-18 19:07:00 +00:00

pwm.h

Separate fan_t from pwm_t

2013-10-30 23:10:10 +00:00

queue_policies.h

cleanup: fix all the header guards

2015-06-18 19:07:00 +00:00

queue.h

Queue: Add ability to modify contiguous units inplace

2015-07-15 21:57:36 +00:00

rsa.h

cleanup: fix all the header guards

2015-06-18 19:07:00 +00:00

sha1.h

cleanup: fix all the header guards

2015-06-18 19:07:00 +00:00

sha256.h

cleanup: fix all the header guards

2015-06-18 19:07:00 +00:00

shared_mem.h

Tidy shared memory module

2012-08-09 17:40:37 -07:00

smbus.h

cleanup: fix all the header guards

2015-06-18 19:07:00 +00:00

software_panic.h

samus: panic reboot EC if PD MCU crashes

2015-02-18 04:53:59 +00:00

spi_flash_reg.h

cleanup: fix all the header guards

2015-06-18 19:07:00 +00:00

spi_flash.h

spi_flash: Add protect support for W25X40

2015-03-11 23:18:09 +00:00

spi.h

common: change interface to SPI flash

2015-07-30 19:57:55 +00:00

stack_trace.h

cleanup: fix all the header guards

2015-06-18 19:07:00 +00:00

switch.h

gpio: Refactor IRQ handler pointer out of gpio_list

2015-04-10 22:08:25 +00:00

system.h

system: provide optional chip_save_reset_flags()

2015-08-26 21:50:28 -07:00

task_id.h

cleanup: fix all the header guards

2015-06-18 19:07:00 +00:00

task.h

nds32: use INT_MASK instead of GIE

2015-08-20 01:37:56 +00:00

temp_sensor_chip.h

cleanup: fix all the header guards

2015-06-18 19:07:00 +00:00

temp_sensor.h

Include battery fuel gauge temp sensor in temperature sensors

2014-02-08 04:21:26 +00:00

test_util.h

common: Add i2c 32bit read/write

2015-06-17 13:10:58 +00:00

thermal.h

Show the fan-cooling percentage for each active temp sensor

2015-01-14 03:15:41 +00:00

throttle_ap.h

Add more build conditions on x86-only code.

2014-08-10 18:39:24 +00:00

timer.h

motion_sense: calculate threshold properly

2015-08-24 19:08:15 +00:00

tpm_registers.h

cr50: introduce tpm task skeleton

2015-08-14 21:04:38 +00:00

uart.h

gpio: Refactor IRQ handler pointer out of gpio_list

2015-04-10 22:08:25 +00:00

usb_api.h

cleanup: fix all the header guards

2015-06-18 19:07:00 +00:00

usb_bb.h

cleanup: fix all the header guards

2015-06-18 19:07:00 +00:00

usb_charge.h

usb_charger: move common usb charger code out of board directory

2015-08-05 16:50:46 +00:00

usb_console.h

cleanup: fix all the header guards

2015-06-18 19:07:00 +00:00

usb_hid.h

cleanup: fix all the header guards

2015-06-18 19:07:00 +00:00

usb_mux.h

usb_charger: cleanup: move setting usb 2 switches to usb_charger

2015-08-04 19:22:07 +00:00

usb_pd_tcpc.h

pd: Enable detection of VBUS via the TCPM/TCPCI interface

2015-08-21 08:10:03 +00:00

usb_pd_tcpm.h

pd: Enable detection of VBUS via the TCPM/TCPCI interface

2015-08-21 08:10:03 +00:00

usb_pd.h

usb_pd: Add host command to limit external charger voltage / current

2015-08-22 01:37:38 +00:00

usb.h

cleanup: fix all the header guards

2015-06-18 19:07:00 +00:00

util.h

Queue: Add methods that accept a memcpy routine

2015-01-08 00:38:13 +00:00

vboot_hash.h

vboot_hash: Abort hash calculation on flash write

2015-07-01 03:49:00 +00:00

version.h

zinger: samus_pd: change zinger SW ver to report commit count

2014-08-28 20:12:52 +00:00

watchdog.h

zinger: change watchdog timeout to 1.8 second

2014-06-17 18:34:03 +00:00

wireless.h

Initial Glower commit

2015-01-20 20:56:43 +00:00