scottk/OpenCellular
1
0
Fork 0
mirror of https://github.com/Telecominfraproject/OpenCellular.git synced 2025-12-28 02:35:28 +00:00
Code Issues Packages Projects Releases Wiki Activity
Files
5cc37f51d6047320dcff379a61e31987237ddf4c
OpenCellular/include
History
Alec Berg d2c4781266 pd: enable charging through suzyQ debug accessory 
Enable charging through debug accessory by setting input
current limit to 3A when debug accessory is detected.
Add new dual-role toggling state for stay sink unless VBUS
is detected, which allows us to detect debug accessory
when we are not normally dual-role toggling.

BUG=none
BRANCH=smaug
TEST=plug suzyQ into ryu in S0 and in S5 and make sure that
we go to the SRC_ACCESSORY state and set charger input
current limit appropriately.

Change-Id: I6262c9d6cd0ae7159f343d36e19d290c2f2e0181
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/276368
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
2015-06-10 03:33:33 +00:00
..
accelgyro.h
motion: Add decoding for MOTION_CMD_DUMP v1 command
2014-11-18 05:19:08 +00:00
acpi.h
Move ACPI stuff out of chip/lm4 and into common
2013-12-12 18:21:56 +00:00
adc.h
stm32: implement ADC support for STM32F0xx
2014-03-20 23:51:28 +00:00
als.h
samus: Add scale factor to account for ALS attenuation
2015-01-21 05:05:47 +00:00
ap_hang_detect.h
Add AP hang detection
2013-12-17 21:27:53 +00:00
backlight.h
gpio: Refactor IRQ handler pointer out of gpio_list
2015-04-10 22:08:25 +00:00
battery_bq27621_g1.h
battery: Add support for TI's BQ27621_g1 fuel gauge.
2014-12-31 00:01:00 +00:00
battery_smart.h
samus: Kick battery out of disconnect state when AC is attached
2014-07-23 02:29:59 +00:00
battery.h
samus: Kick battery out of disconnect state when AC is attached
2014-07-23 02:29:59 +00:00
blob.h
Cr50: Add usb_blob handler framework
2015-06-04 19:33:00 +00:00
board_config.h
Clean up board configuration
2013-04-05 14:28:42 -07:00
button.h
Samus: Support capsense input as keyboard events.
2014-02-08 04:15:39 +00:00
capsense.h
Samus: Support capsense input as keyboard events.
2014-02-08 04:15:39 +00:00
case_closed_debug.h
CCD: Remove CCD specific board connect and disconnect
2015-02-10 23:07:16 +00:00
charge_manager.h
pd_log: Add command to request PD MCU to write a log
2015-02-12 23:08:45 +00:00
charge_ramp.h
charge_ramp: fix flaky charge_ramp test
2015-05-02 01:14:13 +00:00
charge_state_v1.h
Move common charge_state time constants to a common header
2014-04-11 15:37:38 +00:00
charge_state_v2.h
samus: fix charge state machine's handling of low power chargers
2014-12-15 19:53:46 +00:00
charge_state.h
charger: Make critical battery shutdown timeout a config option
2015-01-15 05:13:14 +00:00
charger.h
Add "debug" option to charge_state_v2.c
2014-05-15 05:28:08 +00:00
chipset.h
gpio: Refactor IRQ handler pointer out of gpio_list
2015-04-10 22:08:25 +00:00
clock.h
stm32: Add delay after enabling peripheral clock
2015-02-10 10:47:07 +00:00
common.h
Add option to enable GCC LTO
2015-05-19 02:46:27 +00:00
compile_time_macros.h
Improved the BUILD_ASSERT macro to work outside of functions.
2013-04-29 11:05:08 -07:00
config_std_internal_flash.h
cleanup: Use appropriate image geometry CONFIGs
2015-05-15 06:42:30 +00:00
config.h
glados: limit max input current to 1.5A to avoid i2c errors
2015-06-09 00:13:54 +00:00
console.h
Add option to enable GCC LTO
2015-05-19 02:46:27 +00:00
consumer.h
Producer/Consumer: Refactor to use Queue policies
2015-05-26 19:36:21 +00:00
crc8.h
EC: Add smbus interface read & write APIs
2014-08-29 02:57:00 +00:00
crc.h
Move software CRC implementation to common
2014-08-08 03:11:38 +00:00
dma.h
samus: pd: fix potential junk at end of tx transmission
2015-01-09 05:40:18 +00:00
dptf.h
Support DPTF charger current limiting
2014-02-08 00:14:48 +00:00
ec_commands.h
motion: Add MOTIONSENSE_CMD_DATA: retrieve single sensor data
2015-06-03 19:46:19 +00:00
eeprom.h
cleanup: eeprom and option comments
2013-10-25 20:12:49 +00:00
eoption.h
Clean up a few modules in common/
2012-10-26 09:49:38 -07:00
extpower_falco.h
Rename charge_state.[ch] to charge_state_v1.[ch]
2014-03-20 23:51:00 +00:00
extpower_spring.h
cleanup: Still more TODO comments
2013-11-02 01:07:10 +00:00
extpower.h
Rename extpower_usb to extpower_spring
2013-08-28 01:54:48 +00:00
fan.h
Samus: Handle fan startup in the EC, not the fan controller
2014-11-06 02:28:22 +00:00
flash.h
cleanup: Use appropriate image geometry CONFIGs
2015-05-15 06:42:30 +00:00
gesture.h
Samus: move gesture to common
2014-10-29 22:23:43 +00:00
gpio_list.h
mec1322: Simplify GPIO lists
2015-05-27 03:58:16 +00:00
gpio_signal.h
mec1322: Simplify GPIO lists
2015-05-27 03:58:16 +00:00
gpio.h
gpio: Refactor IRQ handler pointer out of gpio_list
2015-04-10 22:08:25 +00:00
gpio.wrap
mec1322: Simplify GPIO lists
2015-05-27 03:58:16 +00:00
hooks.h
Add option to enable GCC LTO
2015-05-19 02:46:27 +00:00
host_command.h
Add option to enable GCC LTO
2015-05-19 02:46:27 +00:00
hwtimer.h
pit: Clean up timer init code
2013-06-26 09:08:23 -07:00
i2c_arbitration.h
Move I2C arbitration to its own file
2013-03-20 15:23:29 -07:00
i2c.h
i2c/mec1322: Lock all I2C port before sysjump.
2015-06-05 03:22:06 +00:00
i8042_protocol.h
More supports for A20 enable/disable
2012-11-04 20:27:57 -08:00
in_stream.h
Stream: Add In and Out stream interfaces and config
2014-09-18 02:59:29 +00:00
inductive_charging.h
Add inductive charging control module
2014-08-25 20:52:32 +00:00
jtag.h
gpio: Refactor IRQ handler pointer out of gpio_list
2015-04-10 22:08:25 +00:00
keyboard_8042.h
Add support for extra buttons not on the keyboard
2014-02-07 04:13:18 +00:00
keyboard_config.h
samus: change charge override hot keys to ctrl+search+0|1|2
2015-01-24 06:42:02 +00:00
keyboard_mkbp.h
cleanup: mkbp keyboard module
2013-10-30 23:10:13 +00:00
keyboard_protocol.h
8042: Add interface for handling off-matrix button changes
2014-02-07 04:13:14 +00:00
keyboard_raw.h
gpio: Refactor IRQ handler pointer out of gpio_list
2015-04-10 22:08:25 +00:00
keyboard_scan.h
Refactored keyboard scan enable flag to allow for multiple disable reasons
2014-04-11 20:02:30 +00:00
keyboard_test.h
Move keyboard dimension and key constants to keyboard_config.h
2013-03-22 11:24:29 -07:00
lb_common.h
Remove PULSE and TEST sequences from lightbar module
2014-10-08 02:50:54 +00:00
led_common.h
Peppy ectool led command
2013-08-07 12:43:48 -07:00
lid_angle.h
Convert motion sense calculations to fixed point.
2015-02-05 19:41:41 +00:00
lid_switch.h
Split lid switch code out of switch.c to its own file
2013-04-02 14:12:57 -07:00
lightbar_msg_list.h
Remove PULSE and TEST sequences from lightbar module
2014-10-08 02:50:54 +00:00
lightbar_opcode_list.h
lightbar: interpreter additions to encode other patterns
2014-10-15 18:22:37 +00:00
lightbar.h
Improve EC console messages for lightbar stuff
2014-11-21 06:23:16 +00:00
link_defs.h
USB: Fix memcpy routines
2015-04-13 20:00:58 +00:00
lpc.h
ACPI: Support accessing memmap data over ACPI CMD / DATA ports
2015-03-25 20:09:52 +00:00
math_util.h
accel: move X,Y,Z definition
2015-06-09 12:10:42 +00:00
memory_commands.h
Initial sources import 2/3
2011-12-07 19:10:02 +00:00
mkbp_event.h
MKBP event signalling implementation
2014-10-24 01:37:58 +00:00
module_id.h
improve enum readability
2015-04-30 02:31:22 +00:00
motion_lid.h
motion_sense: Add required header
2015-03-06 08:48:39 +00:00
motion_sense.h
driver: Use common data structure to store default accel values
2015-05-12 23:35:51 +00:00
onewire.h
Clean up LED and onewire modules
2012-10-25 14:12:11 -07:00
out_stream.h
OutStream: Remove unused prototypes
2015-01-07 19:44:21 +00:00
panic.h
lm4: stm32: Store panic data in backup registers on hard reset
2015-03-14 03:22:37 +00:00
peci.h
Switch temp sensor polling to use hooks instead of task
2012-11-01 12:45:22 -07:00
pmu_tpschrome.h
rename power_state* to charge_state*
2014-01-07 04:53:20 +00:00
port80.h
mec1322: Added task-based Port80 POST code support.
2015-04-27 23:29:30 +00:00
power_button.h
skylake: Use a simulated power button press to force-shutdown the AP
2015-06-04 01:15:55 +00:00
power_led.h
Replace generated CONFIG_TASK_ macros with HAS_TASK_
2013-04-24 16:32:58 -07:00
power.h
power: Move EC_CMD_GSV_PAUSE_IN_S5 handler to common code
2015-05-07 17:25:40 +00:00
printf.h
Clean up printf module
2012-10-25 14:12:10 -07:00
producer.h
Producer/Consumer: Refactor to use Queue policies
2015-05-26 19:36:21 +00:00
pwm.h
Separate fan_t from pwm_t
2013-10-30 23:10:10 +00:00
queue_policies.h
Producer/Consumer: Refactor to use Queue policies
2015-05-26 19:36:21 +00:00
queue.h
Queue: add peek_memcpy function
2015-06-09 12:10:37 +00:00
rsa.h
Add RW firmware signature verification for common runtime
2014-12-01 20:30:46 +00:00
sha1.h
samus: add host commands for flashing zinger RW
2014-08-26 23:06:23 +00:00
sha256.h
Clean up vboot hash support
2012-10-25 17:03:44 -07:00
shared_mem.h
Tidy shared memory module
2012-08-09 17:40:37 -07:00
smbus.h
EC: Add smbus interface read & write APIs
2014-08-29 02:57:00 +00:00
software_panic.h
samus: panic reboot EC if PD MCU crashes
2015-02-18 04:53:59 +00:00
spi_flash_reg.h
spi_flash: Rework protection translation functions
2015-03-17 01:42:30 +00:00
spi_flash.h
spi_flash: Add protect support for W25X40
2015-03-11 23:18:09 +00:00
spi.h
cr50: add SPI Slave driver
2015-05-07 23:39:06 +00:00
sps.h
cr50: add SPI Slave driver
2015-05-07 23:39:06 +00:00
stack_trace.h
emulator: Move trace dump to a separate module
2014-01-22 04:52:49 +00:00
stream_adaptor.h
Cleanup: Use compound literals for static initialization
2015-05-27 01:27:20 +00:00
switch.h
gpio: Refactor IRQ handler pointer out of gpio_list
2015-04-10 22:08:25 +00:00
system.h
nuc: Add all IC specific drivers of NPCX5M5G
2015-01-14 03:16:10 +00:00
task_id.h
Add interrupt support for emulator
2014-01-06 12:40:45 +00:00
task.h
cortex-m0: Add deferred scheduler
2015-02-12 06:44:04 +00:00
temp_sensor_chip.h
cleanup: Rename and move header files
2013-10-23 21:27:40 +00:00
temp_sensor.h
Include battery fuel gauge temp sensor in temperature sensors
2014-02-08 04:21:26 +00:00
test_util.h
Optimize memset
2014-03-01 20:15:59 +00:00
thermal.h
Show the fan-cooling percentage for each active temp sensor
2015-01-14 03:15:41 +00:00
throttle_ap.h
Add more build conditions on x86-only code.
2014-08-10 18:39:24 +00:00
timer.h
cleanup: More comments in timer.h
2013-11-21 00:09:09 +00:00
uart.h
gpio: Refactor IRQ handler pointer out of gpio_list
2015-04-10 22:08:25 +00:00
usb_api.h
stm32: Do not wait for USB host if USB is disabled
2014-11-21 02:44:07 +00:00
usb_bb.h
usb: Groundwork for USB BOS & Billboard class descriptors.
2014-10-11 02:22:23 +00:00
usb_charge.h
rambi: Leave 5V rail on in S3 if USB ports are powered
2014-01-23 19:32:27 +00:00
usb_console.h
ryu: Enable PD/EC console over USB
2014-11-13 03:14:37 +00:00
usb_hid.h
usb: add USB HID driver
2014-06-19 03:28:43 +00:00
usb_pd_tcpc.h
pd: stm32f0: modify i2c driver to support TCPCI
2015-05-27 02:39:48 +00:00
usb_pd_tcpm.h
pd: implement TCPC RX Detect register to enable/disable TCPC RX
2015-06-03 03:50:06 +00:00
usb_pd.h
pd: enable charging through suzyQ debug accessory
2015-06-10 03:33:33 +00:00
usb.h
cleanup: Remove device-specific stuff from include/usb.h
2015-05-28 23:02:08 +00:00
util.h
Queue: Add methods that accept a memcpy routine
2015-01-08 00:38:13 +00:00
vboot_hash.h
Invalidate hash if flash operation changes the hashed region
2012-12-10 15:14:38 -08:00
version.h
zinger: samus_pd: change zinger SW ver to report commit count
2014-08-28 20:12:52 +00:00
watchdog.h
zinger: change watchdog timeout to 1.8 second
2014-06-17 18:34:03 +00:00
wireless.h
Initial Glower commit
2015-01-20 20:56:43 +00:00