Kevin K Wong 5efbecb770 kunimitsu: hibernate: enable PseudoG3 support at board level ...

this is to move the existing code from chipset level to board level
since PseudoG3 is a board feature that required specific hardware.

BUG=none
BRANCH=glados
TEST=use hibernate command to enter PseudoG3

Change-Id: I309ef89e0ff7057ce46c634baa9791731a771984
Signed-off-by: Kevin K Wong <kevin.k.wong@intel.com>
Reviewed-on: https://chromium-review.googlesource.com/327677
Reviewed-by: Shawn N <shawnn@chromium.org>

2016-02-18 17:35:16 -08:00

..

auron

pwm: Add common initialization for PWM pins

2015-12-04 01:20:33 -08:00

bds

cleanup: Standardize use of CONFIG_I2C and add MASTER/SLAVE CONFIGs

2015-11-03 09:08:21 -08:00

big

pwm: Add common initialization for PWM pins

2015-12-04 01:20:33 -08:00

chell

mec1322: clock: Use full-speed 48MHz processor clock during EC boot

2016-02-09 19:51:00 -08:00

cr50

cr50: upgrade command extension

2016-02-17 12:01:32 -08:00

dingdong

pd: Cleanup PD port-to-task macros

2015-11-11 08:05:40 -08:00

discovery

USART: Add DMA based receiver

2015-08-24 19:08:35 +00:00

discovery-stm32f072

USART: Add DMA based receiver

2015-08-24 19:08:35 +00:00

glados

mec1322: clock: Use full-speed 48MHz processor clock during EC boot

2016-02-09 19:51:00 -08:00

glados_pd

chell / chell_pd: Use power-optimized GPIO defaults

2015-12-24 01:43:00 -08:00

hadoken

cleanup: Standardize use of CONFIG_I2C and add MASTER/SLAVE CONFIGs

2015-11-03 09:08:21 -08:00

hoho

pd: Cleanup PD port-to-task macros

2015-11-11 08:05:40 -08:00

honeybuns

honeybuns: enable updates over USB-PD

2015-12-11 00:47:56 -08:00

host

pd: change battery and variable sink cap for voltage inaccuracy

2015-10-23 13:18:58 -07:00

it8380dev

config: it83xx: remove "CONFIG_IT83XX_PECI_WITH_INTERRUPT"

2016-02-17 20:57:01 -08:00

jerry

cleanup: Standardize use of CONFIG_I2C and add MASTER/SLAVE CONFIGs

2015-11-03 09:08:21 -08:00

kunimitsu

kunimitsu: hibernate: enable PseudoG3 support at board level

2016-02-18 17:35:16 -08:00

lars

kunimitsu: hibernate: enable PseudoG3 support at board level

2016-02-18 17:35:16 -08:00

lars_pd

Lars: Remove second port of PD firmware

2015-12-06 19:00:51 -08:00

llama

cleanup: Standardize use of CONFIG_I2C and add MASTER/SLAVE CONFIGs

2015-11-03 09:08:21 -08:00

lucid

lucid: add battery cutoff functionality

2016-02-16 13:34:13 -08:00

npcx_evb

nuc: Support hibernate_wake_pins on wheatley, npcx_evb and npcx_evb_arm.

2016-01-14 22:12:05 -08:00

npcx_evb_arm

nuc: Support hibernate_wake_pins on wheatley, npcx_evb and npcx_evb_arm.

2016-01-14 22:12:05 -08:00

oak

oak: pd: move power change notification to function board_set_charge_limit.

2016-01-08 05:04:45 -08:00

pdeval-stm32f072

pd: Add support for multiple distinct TCPC alert signals

2015-11-25 12:59:17 -08:00

pit

cleanup: Standardize use of CONFIG_I2C and add MASTER/SLAVE CONFIGs

2015-11-03 09:08:21 -08:00

plankton

Plankton: Added support for normal dualrole operation

2016-02-08 12:09:08 -08:00

rambi

pwm: Add common initialization for PWM pins

2015-12-04 01:20:33 -08:00

ryu

motion: minium interval between motion task now a variable

2015-11-13 01:00:39 -08:00

samus

charger: Change unlocked battery level ignore conditions

2016-01-06 18:48:11 -08:00

samus_pd

pwm: Add common initialization for PWM pins

2015-12-04 01:20:33 -08:00

snoball

stm32: Don't use HSI48 clock for chips which don't support it

2015-12-11 17:03:22 -08:00

strago

kunimitsu: hibernate: enable PseudoG3 support at board level

2016-02-18 17:35:16 -08:00

twinkie

GPIO: Prefer gpio_set_flags

2016-01-26 18:54:28 -08:00

wheatley

wheatley / nuc: Modified the internal ref voltage of ADC to 2.816V

2016-02-17 02:02:03 -08:00

zinger

stm32: add synchronous debug printf

2015-10-19 13:45:49 -07:00

chell_pd

chell: Add EC/PD configuration for chell board

2015-10-12 13:15:48 -07:00

kunimitsu_pd

kunimitsu_pd: enable kunimitsu PD build

2015-08-12 04:25:20 +00:00

minimuffin

zinger: minimuffin: add board support for minimuffin

2014-10-02 20:51:10 +00:00

oak_pd

oak_pd: change oak_pd to be a sym link to glados_pd

2015-11-04 07:08:35 -08:00

OWNERS

Add OWNERS files

2014-04-02 19:58:53 +00:00