Kyoung Kim 6e2d298249 Skylake: prevent EC from continuing execution after turning 3.3V_DSW off. ...

Without this patch, EC continues to execute including board_pmic_init()
and its i2c transaction can be disturbed in the middle without proper
i2c stop and following new i2c transaction might fails.

BUG=none
BRANCH=master
TEST=none

Change-Id: Iaa39d3531faa5af24c1c4b445de014c9e263a021
Signed-off-by: Kyoung Kim <kyoung.il.kim@intel.com>
Reviewed-on: https://chromium-review.googlesource.com/321342
Commit-Ready: Kyoung Il Kim <kyoung.il.kim@intel.com>
Tested-by: Kyoung Il Kim <kyoung.il.kim@intel.com>
Reviewed-by: Kevin K Wong <kevin.k.wong@intel.com>
Reviewed-by: Shawn N <shawnn@chromium.org>

2016-01-13 15:03:43 -08:00

..

auron

pwm: Add common initialization for PWM pins

2015-12-04 01:20:33 -08:00

bds

cleanup: Standardize use of CONFIG_I2C and add MASTER/SLAVE CONFIGs

2015-11-03 09:08:21 -08:00

big

pwm: Add common initialization for PWM pins

2015-12-04 01:20:33 -08:00

chell

Skylake: prevent EC from continuing execution after turning 3.3V_DSW off.

2016-01-13 15:03:43 -08:00

cr50

Initial RSA implementation.

2016-01-11 22:03:13 -08:00

dingdong

pd: Cleanup PD port-to-task macros

2015-11-11 08:05:40 -08:00

discovery

USART: Add DMA based receiver

2015-08-24 19:08:35 +00:00

discovery-stm32f072

USART: Add DMA based receiver

2015-08-24 19:08:35 +00:00

glados

Skylake: prevent EC from continuing execution after turning 3.3V_DSW off.

2016-01-13 15:03:43 -08:00

glados_pd

chell / chell_pd: Use power-optimized GPIO defaults

2015-12-24 01:43:00 -08:00

hadoken

cleanup: Standardize use of CONFIG_I2C and add MASTER/SLAVE CONFIGs

2015-11-03 09:08:21 -08:00

hoho

pd: Cleanup PD port-to-task macros

2015-11-11 08:05:40 -08:00

honeybuns

honeybuns: enable updates over USB-PD

2015-12-11 00:47:56 -08:00

host

pd: change battery and variable sink cap for voltage inaccuracy

2015-10-23 13:18:58 -07:00

it8380dev

it8380dev: Implement GPIO mode for KBS pins and fix gpio_set_level()

2015-12-14 20:04:54 -08:00

jerry

cleanup: Standardize use of CONFIG_I2C and add MASTER/SLAVE CONFIGs

2015-11-03 09:08:21 -08:00

kunimitsu

Skylake: prevent EC from continuing execution after turning 3.3V_DSW off.

2016-01-13 15:03:43 -08:00

lars

Skylake: prevent EC from continuing execution after turning 3.3V_DSW off.

2016-01-13 15:03:43 -08:00

lars_pd

Lars: Remove second port of PD firmware

2015-12-06 19:00:51 -08:00

llama

cleanup: Standardize use of CONFIG_I2C and add MASTER/SLAVE CONFIGs

2015-11-03 09:08:21 -08:00

lucid

pd: Add common EC_HOST_EVENT_PD_MCU implementation

2016-01-07 20:12:58 -08:00

npcx_evb

nuc: Support rpm mode for fan control.

2016-01-06 20:43:32 -08:00

npcx_evb_arm

nuc: Support rpm mode for fan control.

2016-01-06 20:43:32 -08:00

oak

oak: pd: move power change notification to function board_set_charge_limit.

2016-01-08 05:04:45 -08:00

pdeval-stm32f072

pd: Add support for multiple distinct TCPC alert signals

2015-11-25 12:59:17 -08:00

pit

cleanup: Standardize use of CONFIG_I2C and add MASTER/SLAVE CONFIGs

2015-11-03 09:08:21 -08:00

plankton

pd: Cleanup PD port-to-task macros

2015-11-11 08:05:40 -08:00

rambi

pwm: Add common initialization for PWM pins

2015-12-04 01:20:33 -08:00

ryu

motion: minium interval between motion task now a variable

2015-11-13 01:00:39 -08:00

samus

charger: Change unlocked battery level ignore conditions

2016-01-06 18:48:11 -08:00

samus_pd

pwm: Add common initialization for PWM pins

2015-12-04 01:20:33 -08:00

snoball

stm32: Don't use HSI48 clock for chips which don't support it

2015-12-11 17:03:22 -08:00

strago

pd: Add common EC_HOST_EVENT_PD_MCU implementation

2016-01-07 20:12:58 -08:00

twinkie

pd: Cleanup PD port-to-task macros

2015-11-11 08:05:40 -08:00

wheatley

Skylake: prevent EC from continuing execution after turning 3.3V_DSW off.

2016-01-13 15:03:43 -08:00

zinger

stm32: add synchronous debug printf

2015-10-19 13:45:49 -07:00

chell_pd

chell: Add EC/PD configuration for chell board

2015-10-12 13:15:48 -07:00

kunimitsu_pd

kunimitsu_pd: enable kunimitsu PD build

2015-08-12 04:25:20 +00:00

minimuffin

zinger: minimuffin: add board support for minimuffin

2014-10-02 20:51:10 +00:00

oak_pd

oak_pd: change oak_pd to be a sym link to glados_pd

2015-11-04 07:08:35 -08:00

OWNERS

Add OWNERS files

2014-04-02 19:58:53 +00:00