Daisuke Nojiri d7c2e435c0 Nami: Set PD_MAX_POWER_MW to 70W ...

This patch sets PD_MAX_POWER_MW to 70W. The max current is 3.5A and
the max voltage is 20V.

Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>

BUG=b:74617335
BRANCH=none
TEST=make BOARD=nami

Change-Id: Iad811a08cbc72653a8618e3ed9bd9627315de6b4
Reviewed-on: https://chromium-review.googlesource.com/1060525
Commit-Ready: Daisuke Nojiri <dnojiri@chromium.org>
Tested-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>

2018-06-06 11:59:38 -07:00

..

atlas

atlas: config PCH_PWR_BTN as push-pull

2018-06-05 02:15:30 -07:00

bds

cleanup: remove transition code for LPC/ESPI cleanup

2018-05-23 09:13:50 -07:00

bip

it83xx: espi: enable eSPI_reset#

2018-06-06 01:16:12 -07:00

careena

stoney: Rename GPIO_PCH_RCIN_L to GPIO_SYS_RESET_L

2018-06-05 15:59:33 -07:00

chell

system: update board version to return an error if encountered

2018-04-19 12:46:14 -07:00

cheza

cheza: Switch USB port-0 HS to the hub

2018-06-01 21:43:33 -07:00

coffeecake

test/build.mk: Allow boards to specify test lists

2018-05-28 07:30:36 -07:00

coral

lpc: convert LPC only boards to use CONFIG_HOSTCMD_LPC

2018-05-22 21:56:38 -07:00

cr50

cr50: add command for factory reset

2018-05-31 16:22:35 -07:00

dingdong

cleanup: CONFIG_USB_PD_CUSTOM_VDM is not used

2018-04-09 15:19:00 -07:00

discovery

chip/stm32/usart: Add flags to usart_config

2017-10-18 08:30:16 -07:00

discovery-stm32f072

chip/stm32/usart: Add flags to usart_config

2017-10-18 08:30:16 -07:00

elm

system: update board version to return an error if encountered

2018-04-19 12:46:14 -07:00

eve

espi: rename remaining eSPI options

2018-05-23 09:13:49 -07:00

fizz

Fizz: Increase VR3 voltage to avoid boot failure

2018-05-30 01:02:36 -07:00

glados

system: update board version to return an error if encountered

2018-04-19 12:46:14 -07:00

glados_pd

test/build.mk: Allow boards to specify test lists

2018-05-28 07:30:36 -07:00

glkrvp

espi: convert all eSPI board to use CONFIG_HOSTCMD_ESPI

2018-05-22 21:56:37 -07:00

glkrvp_ite

it83xx: espi: enable eSPI_reset#

2018-06-06 01:16:12 -07:00

grunt

stoney: Rename GPIO_PCH_RCIN_L to GPIO_SYS_RESET_L

2018-06-05 15:59:33 -07:00

hadoken

test/build.mk: Allow boards to specify test lists

2018-05-28 07:30:36 -07:00

hammer

whiskers: Expose a switch for tablet mode

2018-06-06 05:00:49 -07:00

hoho

cleanup: CONFIG_USB_PD_CUSTOM_VDM is not used

2018-04-09 15:19:00 -07:00

host

Cr50: Add logging functionality to PinWeaver.

2018-04-27 12:22:26 -07:00

it83xx_evb

it83xx: Add a config option for enabling mouse LDN

2018-05-26 00:21:44 -07:00

jerry

stm32: Fix bkpdata accounting

2018-01-30 14:54:17 -08:00

kahlee

stoney: Rename GPIO_PCH_RCIN_L to GPIO_SYS_RESET_L

2018-06-05 15:59:33 -07:00

kevin

chip/npcx: Increase default stack size for tasks

2018-05-16 05:08:30 -07:00

mchpevb1

espi: rename remaining eSPI options

2018-05-23 09:13:49 -07:00

meowth_fp

meowth_fp: update AP interrupt configuration

2018-06-04 10:09:41 -07:00

nami

Nami: Set PD_MAX_POWER_MW to 70W

2018-06-06 11:59:38 -07:00

nautilus

espi: rename remaining eSPI options

2018-05-23 09:13:49 -07:00

nocturne

nocturne: Add NVMe power enable controls.

2018-06-01 17:44:50 -07:00

npcx7_evb

espi: rename remaining eSPI options

2018-05-23 09:13:49 -07:00

npcx_evb

lpc: convert LPC only boards to use CONFIG_HOSTCMD_LPC

2018-05-22 21:56:38 -07:00

npcx_evb_arm

system: update board version to return an error if encountered

2018-04-19 12:46:14 -07:00

nucleo-f072rb

eCTS: Add nested interrupt test (Low->High)

2016-11-09 23:26:30 -08:00

nucleo-f411re

board: In motion sensor array, remove assignment to 0

2018-03-14 07:04:02 -07:00

oak

system: update board version to return an error if encountered

2018-04-19 12:46:14 -07:00

pdeval-stm32f072

Makefile.rules: Add buildalltests target

2018-05-26 00:21:41 -07:00

phaser

battery: Move fuel gauge code to common

2018-06-01 17:44:20 -07:00

plankton

cleanup: CONFIG_USB_PD_CUSTOM_VDM is not used

2018-04-09 15:19:00 -07:00

polyberry

chip/stm32/usb: Replace reset handler by generic event handler

2017-08-16 04:03:24 -07:00

poppy

espi: rename remaining eSPI options

2018-05-23 09:13:49 -07:00

rainier

system: update board version to return an error if encountered

2018-04-19 12:46:14 -07:00

reef

lpc: convert LPC only boards to use CONFIG_HOSTCMD_LPC

2018-05-22 21:56:38 -07:00

reef_it8320

Makefile.rules: Add buildalltests target

2018-05-26 00:21:41 -07:00

rowan

Makefile.rules: Add buildalltests target

2018-05-26 00:21:41 -07:00

samus

test/build.mk: Allow boards to specify test lists

2018-05-28 07:30:36 -07:00

samus_pd

test/build.mk: Allow boards to specify test lists

2018-05-28 07:30:36 -07:00

scarlet

scarlet: Don't disable idle mode in S3

2018-05-31 03:50:24 -07:00

servo_micro

Documentation for CCD and servo_micro

2018-04-13 01:43:28 -07:00

servo_v4

servo_v4: use coreboot toolchain

2018-06-05 21:28:45 -07:00

stm32f446e-eval

chip/stm32/usb: Replace reset handler by generic event handler

2017-08-16 04:03:24 -07:00

stm32l476g-eval

eCTS: Expedite flashing time

2017-06-28 21:50:51 -07:00

strago

Makefile.rules: Add buildalltests target

2018-05-26 00:21:41 -07:00

sweetberry

sweetberry: expose i2c over usb

2018-05-21 18:19:29 -07:00

tigertail

usb_i2c: Remove usb_i2c_board_enable/disable

2017-11-20 23:25:45 -08:00

twinkie

twinkie: clean-up disabled SNIFFER_HEADER_V2 code

2017-10-31 03:54:43 -07:00

wheatley

espi: rename remaining eSPI options

2018-05-23 09:13:49 -07:00

yorp

battery: Move fuel gauge code to common

2018-06-01 17:44:20 -07:00

zinger

cleanup: CONFIG_USB_PD_CUSTOM_VDM is not used

2018-04-09 15:19:00 -07:00

zoombini

ppc: making driver non-const

2018-05-24 15:44:30 -07:00

chell_pd

chell: Add EC/PD configuration for chell board

2015-10-12 13:15:48 -07:00

gru

gru: Initial mainboard commit

2016-05-04 16:15:02 -07:00

lux

lux: Add lux board

2018-01-10 12:58:55 -08:00

meowth

Meowth: Added initial board file.

2017-11-15 20:21:12 -08:00

minimuffin

zinger: minimuffin: add board support for minimuffin

2014-10-02 20:51:10 +00:00

nocturne_fp

Add nocturne_fp board configuration

2018-04-10 19:12:40 -07:00

oak_pd

oak_pd: change oak_pd to be a sym link to glados_pd

2015-11-04 07:08:35 -08:00

OWNERS

Add OWNERS files

2014-04-02 19:58:53 +00:00

soraka

soraka: Replace individual files symlinks by directory symlinks

2018-01-05 12:10:01 -08:00

staff

hammer: Add staff board

2017-05-16 07:47:05 -07:00

wand

wand: Add wand board

2017-12-20 05:49:34 -08:00

whiskers

board: Add support for whiskers board

2017-11-09 16:43:54 -08:00