Mulin Chao 6e0c60d11f npcx: Modify gpio's interrupt utilities ...

Setting NVIC_EN register is not a suitable method if you want to turn
on/off one GPIO's interrupt. Since there're eight sources belong to
the same interrupt, using MIWU_EN register which bit belongs to one
MIWU's source is a better way.

Modified sources:
1. gpio.c: Replace accessing NVIC_EN register with MIWU_EN in gpio's
interrupt utilities.

BRANCH=none
BUG=chrome-os-partner:34346
TEST=make buildall -j; test nuvoton IC specific drivers

Change-Id: I282a45f5a3ab7cb032b2282cf7e92cacc5e706b6
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
Reviewed-on: https://chromium-review.googlesource.com/342122
Commit-Ready: Shawn N <shawnn@chromium.org>
Tested-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>

2016-05-18 18:11:33 -07:00

..

lfw

nuc: Add SHI driver for arm-based platform in chip folder.

2015-06-26 18:57:32 +00:00

spiflashfw

nuc: Fixed flash layout issue for npcx

2015-09-21 20:50:56 -07:00

adc_chip.h

wheatley / nuc: Modified the internal ref voltage of ADC to 2.816V

2016-02-17 02:02:03 -08:00

adc.c

common: adc/i2c: Mark task_waiting volatile

2015-12-01 18:52:53 -08:00

build.mk

npcx: Rename CONFIG_SHI to CONFIG_HOSTCMD_SPS

2016-03-08 13:56:38 -08:00

clock_chip.h

nuc: Adjust core clock from 16/12 MHz to 15/13 MHz.

2016-01-20 20:36:53 -08:00

clock.c

npcx: Fixed bug that unexpected value of timer which source clock is 32K

2016-05-11 21:24:32 -07:00

config_chip.h

kevin: Move RAM from data section to code

2016-05-10 09:34:45 -07:00

config_flash_layout.h

kevin: Move RAM from data section to code

2016-05-10 09:34:45 -07:00

fan_chip.h

nuc: Support rpm mode for fan control.

2016-01-06 20:43:32 -08:00

fan.c

hooks: Add relative HOOK_INIT priority for peripherals

2016-05-05 01:12:25 -07:00

flash.c

shorten long console command names

2016-05-18 01:27:45 -07:00

gpio.c

npcx: Modify gpio's interrupt utilities

2016-05-18 18:11:33 -07:00

header.c

wheatley: Add CONFIG_LTO definition to reduce FW size.

2015-12-30 20:40:48 -08:00

hwtimer_chip.h

nuc: Add support for CONFIG_LOW_POWER_S0.

2016-02-06 01:57:58 -08:00

hwtimer.c

npcx: Fixed bug that unexpected value of timer which source clock is 32K

2016-05-11 21:24:32 -07:00

i2c.c

npcx: i2c: Fix spurious NACK after i2cscan

2016-05-17 12:51:17 -07:00

jtag.c

nuc: Enable JTAG directly by NPCX_ENABLE_JTAG definition

2015-10-17 04:56:09 -07:00

keyboard_raw.c

NPCX: Convert keyboard pins to use ALTERNATE macro

2016-03-02 11:22:51 -08:00

lpc_chip.h

nuc:Using LRESET interrupt to re-initialize LPC settings after warm boot

2015-08-12 18:12:27 +00:00

lpc.c

apollolake: ignore PLTRST# from SOC unless RSMRST# is deasserted

2016-05-03 15:40:46 -07:00

peci.c

nuc:

2015-07-25 01:22:32 +00:00

pwm_chip.h

pwm: Add PWM_CONFIG_DSLEEP config flag

2016-04-27 23:58:04 -07:00

pwm.c

hooks: Add relative HOOK_INIT priority for peripherals

2016-05-05 01:12:25 -07:00

registers.h

npcx: shi: Remove excessively verbose prints

2016-04-19 13:56:45 -07:00

rom_chip.h

nuc: Add SHI driver for arm-based platform in chip folder.

2015-06-26 18:57:32 +00:00

shi_chip.h

npcx: Rename CONFIG_SHI to CONFIG_HOSTCMD_SPS

2016-03-08 13:56:38 -08:00

shi.c

npcx: shi: Allow up to 10ms from CS assertion to first data byte

2016-05-12 18:45:40 -07:00

spi.c

npcx: spi: disable all port from board struct

2016-05-06 00:25:15 -07:00

system_chip.h

nuc: Support hibernate_wake_pins on wheatley, npcx_evb and npcx_evb_arm.

2016-01-14 22:12:05 -08:00

system.c

npcx: add device id for npcx586g/npcx576g

2016-05-04 02:42:21 -07:00

uart.c

UART: Remove enable/disable interrupt functions

2016-04-27 10:10:02 -07:00

watchdog.c

npcx: Fixed bug that unexpected value of timer which source clock is 32K

2016-05-11 21:24:32 -07:00