Having DIO A4, A8, and A14 connected to the spi master output pads
prevents reef from booting. We need to tristate those pins when spi ccd
is not in use.
This change disconnects those pins from the spi peripheral when spi is
disabled and reconnects them when spi is enabled.
BUG=chrome-os-partner:53582
BRANCH=none
TEST=manual
use 'pinmux' to verify DIOA4, DIOA8, and DIOA14 are set have
GPIO 7, 8, and 9 as their output sources when not using the usb
spi interface.
Check the usb spi interface still works.
Enable usb spi then disable ccd and check that the pins are
connected back to the non-peripheral gpios.
Verify the AP on kevin and reef can be flashed using servo.
Verify the AP boots successfully on both.
Change-Id: I85d70422a30da445076432d2bfc81960aeba8578
Signed-off-by: Mary Ruthven <mruthven@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/357883
Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
41f872ed53