scottk/OpenCellular
1
0
Fork 0
mirror of https://github.com/Telecominfraproject/OpenCellular.git synced 2025-12-27 18:25:05 +00:00
Code Issues Packages Projects Releases Wiki Activity
Files
930e001165c2df0b491288b2a8de1071b58ac6ec
OpenCellular/include
History
Alec Berg 930e001165 glados: limit max input current to 1.5A to avoid i2c errors 
Add workaround to limit the max input current to 1.5A due to
i2c communication problems at higher currents. Note that this
max should be removed when possible.

This introduces a new CONFIG option to define the maximum input
current limit for a board, as opposed to the already existing
default input current limit.

BUG=none
BRANCH=none
TEST=load on glados, charge with zinger, make sure input current
is set to 1.5A and no recurring i2c errors talking to battery
and charger.

Change-Id: Ib7070772e1bf5475e98a2dc946ae75bf08047b70
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/276169
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-06-09 00:13:54 +00:00
..
accelgyro.h
motion: Add decoding for MOTION_CMD_DUMP v1 command
2014-11-18 05:19:08 +00:00
acpi.h
Move ACPI stuff out of chip/lm4 and into common
2013-12-12 18:21:56 +00:00
adc.h
stm32: implement ADC support for STM32F0xx
2014-03-20 23:51:28 +00:00
als.h
samus: Add scale factor to account for ALS attenuation
2015-01-21 05:05:47 +00:00
ap_hang_detect.h
Add AP hang detection
2013-12-17 21:27:53 +00:00
backlight.h
gpio: Refactor IRQ handler pointer out of gpio_list
2015-04-10 22:08:25 +00:00
battery_bq27621_g1.h
battery: Add support for TI's BQ27621_g1 fuel gauge.
2014-12-31 00:01:00 +00:00
battery_smart.h
samus: Kick battery out of disconnect state when AC is attached
2014-07-23 02:29:59 +00:00
battery.h
samus: Kick battery out of disconnect state when AC is attached
2014-07-23 02:29:59 +00:00
blob.h
Cr50: Add usb_blob handler framework
2015-06-04 19:33:00 +00:00
board_config.h
Clean up board configuration
2013-04-05 14:28:42 -07:00
button.h
Samus: Support capsense input as keyboard events.
2014-02-08 04:15:39 +00:00
capsense.h
Samus: Support capsense input as keyboard events.
2014-02-08 04:15:39 +00:00
case_closed_debug.h
CCD: Remove CCD specific board connect and disconnect
2015-02-10 23:07:16 +00:00
charge_manager.h
pd_log: Add command to request PD MCU to write a log
2015-02-12 23:08:45 +00:00
charge_ramp.h
charge_ramp: fix flaky charge_ramp test
2015-05-02 01:14:13 +00:00
charge_state_v1.h
Move common charge_state time constants to a common header
2014-04-11 15:37:38 +00:00
charge_state_v2.h
samus: fix charge state machine's handling of low power chargers
2014-12-15 19:53:46 +00:00
charge_state.h
charger: Make critical battery shutdown timeout a config option
2015-01-15 05:13:14 +00:00
charger.h
Add "debug" option to charge_state_v2.c
2014-05-15 05:28:08 +00:00
chipset.h
gpio: Refactor IRQ handler pointer out of gpio_list
2015-04-10 22:08:25 +00:00
clock.h
stm32: Add delay after enabling peripheral clock
2015-02-10 10:47:07 +00:00
common.h
Add option to enable GCC LTO
2015-05-19 02:46:27 +00:00
compile_time_macros.h
Improved the BUILD_ASSERT macro to work outside of functions.
2013-04-29 11:05:08 -07:00
config_std_internal_flash.h
cleanup: Use appropriate image geometry CONFIGs
2015-05-15 06:42:30 +00:00
config.h
glados: limit max input current to 1.5A to avoid i2c errors
2015-06-09 00:13:54 +00:00
console.h
Add option to enable GCC LTO
2015-05-19 02:46:27 +00:00
consumer.h
Producer/Consumer: Refactor to use Queue policies
2015-05-26 19:36:21 +00:00
crc8.h
EC: Add smbus interface read & write APIs
2014-08-29 02:57:00 +00:00
crc.h
Move software CRC implementation to common
2014-08-08 03:11:38 +00:00
dma.h
samus: pd: fix potential junk at end of tx transmission
2015-01-09 05:40:18 +00:00
dptf.h
Support DPTF charger current limiting
2014-02-08 00:14:48 +00:00
ec_commands.h
motion: Add MOTIONSENSE_CMD_DATA: retrieve single sensor data
2015-06-03 19:46:19 +00:00
eeprom.h
cleanup: eeprom and option comments
2013-10-25 20:12:49 +00:00
eoption.h
Clean up a few modules in common/
2012-10-26 09:49:38 -07:00
extpower_falco.h
Rename charge_state.[ch] to charge_state_v1.[ch]
2014-03-20 23:51:00 +00:00
extpower_spring.h
cleanup: Still more TODO comments
2013-11-02 01:07:10 +00:00
extpower.h
Rename extpower_usb to extpower_spring
2013-08-28 01:54:48 +00:00
fan.h
Samus: Handle fan startup in the EC, not the fan controller
2014-11-06 02:28:22 +00:00
flash.h
cleanup: Use appropriate image geometry CONFIGs
2015-05-15 06:42:30 +00:00
gesture.h
Samus: move gesture to common
2014-10-29 22:23:43 +00:00
gpio_list.h
mec1322: Simplify GPIO lists
2015-05-27 03:58:16 +00:00
gpio_signal.h
mec1322: Simplify GPIO lists
2015-05-27 03:58:16 +00:00
gpio.h
gpio: Refactor IRQ handler pointer out of gpio_list
2015-04-10 22:08:25 +00:00
gpio.wrap
mec1322: Simplify GPIO lists
2015-05-27 03:58:16 +00:00
hooks.h
Add option to enable GCC LTO
2015-05-19 02:46:27 +00:00
host_command.h
Add option to enable GCC LTO
2015-05-19 02:46:27 +00:00
hwtimer.h
pit: Clean up timer init code
2013-06-26 09:08:23 -07:00
i2c_arbitration.h
Move I2C arbitration to its own file
2013-03-20 15:23:29 -07:00
i2c.h
i2c/mec1322: Lock all I2C port before sysjump.
2015-06-05 03:22:06 +00:00
i8042_protocol.h
More supports for A20 enable/disable
2012-11-04 20:27:57 -08:00
in_stream.h
Stream: Add In and Out stream interfaces and config
2014-09-18 02:59:29 +00:00
inductive_charging.h
Add inductive charging control module
2014-08-25 20:52:32 +00:00
jtag.h
gpio: Refactor IRQ handler pointer out of gpio_list
2015-04-10 22:08:25 +00:00
keyboard_8042.h
Add support for extra buttons not on the keyboard
2014-02-07 04:13:18 +00:00
keyboard_config.h
samus: change charge override hot keys to ctrl+search+0|1|2
2015-01-24 06:42:02 +00:00
keyboard_mkbp.h
cleanup: mkbp keyboard module
2013-10-30 23:10:13 +00:00
keyboard_protocol.h
8042: Add interface for handling off-matrix button changes
2014-02-07 04:13:14 +00:00
keyboard_raw.h
gpio: Refactor IRQ handler pointer out of gpio_list
2015-04-10 22:08:25 +00:00
keyboard_scan.h
Refactored keyboard scan enable flag to allow for multiple disable reasons
2014-04-11 20:02:30 +00:00
keyboard_test.h
Move keyboard dimension and key constants to keyboard_config.h
2013-03-22 11:24:29 -07:00
lb_common.h
Remove PULSE and TEST sequences from lightbar module
2014-10-08 02:50:54 +00:00
led_common.h
Peppy ectool led command
2013-08-07 12:43:48 -07:00
lid_angle.h
Convert motion sense calculations to fixed point.
2015-02-05 19:41:41 +00:00
lid_switch.h
Split lid switch code out of switch.c to its own file
2013-04-02 14:12:57 -07:00
lightbar_msg_list.h
Remove PULSE and TEST sequences from lightbar module
2014-10-08 02:50:54 +00:00
lightbar_opcode_list.h
lightbar: interpreter additions to encode other patterns
2014-10-15 18:22:37 +00:00
lightbar.h
Improve EC console messages for lightbar stuff
2014-11-21 06:23:16 +00:00
link_defs.h
USB: Fix memcpy routines
2015-04-13 20:00:58 +00:00
lpc.h
ACPI: Support accessing memmap data over ACPI CMD / DATA ports
2015-03-25 20:09:52 +00:00
math_util.h
Convert motion sense calculations to fixed point.
2015-02-05 19:41:41 +00:00
memory_commands.h
Initial sources import 2/3
2011-12-07 19:10:02 +00:00
mkbp_event.h
MKBP event signalling implementation
2014-10-24 01:37:58 +00:00
module_id.h
improve enum readability
2015-04-30 02:31:22 +00:00
motion_lid.h
motion_sense: Add required header
2015-03-06 08:48:39 +00:00
motion_sense.h
driver: Use common data structure to store default accel values
2015-05-12 23:35:51 +00:00
onewire.h
Clean up LED and onewire modules
2012-10-25 14:12:11 -07:00
out_stream.h
OutStream: Remove unused prototypes
2015-01-07 19:44:21 +00:00
panic.h
lm4: stm32: Store panic data in backup registers on hard reset
2015-03-14 03:22:37 +00:00
peci.h
Switch temp sensor polling to use hooks instead of task
2012-11-01 12:45:22 -07:00
pmu_tpschrome.h
rename power_state* to charge_state*
2014-01-07 04:53:20 +00:00
port80.h
mec1322: Added task-based Port80 POST code support.
2015-04-27 23:29:30 +00:00
power_button.h
skylake: Use a simulated power button press to force-shutdown the AP
2015-06-04 01:15:55 +00:00
power_led.h
Replace generated CONFIG_TASK_ macros with HAS_TASK_
2013-04-24 16:32:58 -07:00
power.h
power: Move EC_CMD_GSV_PAUSE_IN_S5 handler to common code
2015-05-07 17:25:40 +00:00
printf.h
Clean up printf module
2012-10-25 14:12:10 -07:00
producer.h
Producer/Consumer: Refactor to use Queue policies
2015-05-26 19:36:21 +00:00
pwm.h
Separate fan_t from pwm_t
2013-10-30 23:10:10 +00:00
queue_policies.h
Producer/Consumer: Refactor to use Queue policies
2015-05-26 19:36:21 +00:00
queue.h
Queue: Add policies to queues
2015-05-26 19:36:15 +00:00
rsa.h
Add RW firmware signature verification for common runtime
2014-12-01 20:30:46 +00:00
sha1.h
samus: add host commands for flashing zinger RW
2014-08-26 23:06:23 +00:00
sha256.h
Clean up vboot hash support
2012-10-25 17:03:44 -07:00
shared_mem.h
Tidy shared memory module
2012-08-09 17:40:37 -07:00
smbus.h
EC: Add smbus interface read & write APIs
2014-08-29 02:57:00 +00:00
software_panic.h
samus: panic reboot EC if PD MCU crashes
2015-02-18 04:53:59 +00:00
spi_flash_reg.h
spi_flash: Rework protection translation functions
2015-03-17 01:42:30 +00:00
spi_flash.h
spi_flash: Add protect support for W25X40
2015-03-11 23:18:09 +00:00
spi.h
cr50: add SPI Slave driver
2015-05-07 23:39:06 +00:00
sps.h
cr50: add SPI Slave driver
2015-05-07 23:39:06 +00:00
stack_trace.h
emulator: Move trace dump to a separate module
2014-01-22 04:52:49 +00:00
stream_adaptor.h
Cleanup: Use compound literals for static initialization
2015-05-27 01:27:20 +00:00
switch.h
gpio: Refactor IRQ handler pointer out of gpio_list
2015-04-10 22:08:25 +00:00
system.h
nuc: Add all IC specific drivers of NPCX5M5G
2015-01-14 03:16:10 +00:00
task_id.h
Add interrupt support for emulator
2014-01-06 12:40:45 +00:00
task.h
cortex-m0: Add deferred scheduler
2015-02-12 06:44:04 +00:00
temp_sensor_chip.h
cleanup: Rename and move header files
2013-10-23 21:27:40 +00:00
temp_sensor.h
Include battery fuel gauge temp sensor in temperature sensors
2014-02-08 04:21:26 +00:00
test_util.h
Optimize memset
2014-03-01 20:15:59 +00:00
thermal.h
Show the fan-cooling percentage for each active temp sensor
2015-01-14 03:15:41 +00:00
throttle_ap.h
Add more build conditions on x86-only code.
2014-08-10 18:39:24 +00:00
timer.h
cleanup: More comments in timer.h
2013-11-21 00:09:09 +00:00
uart.h
gpio: Refactor IRQ handler pointer out of gpio_list
2015-04-10 22:08:25 +00:00
usb_api.h
stm32: Do not wait for USB host if USB is disabled
2014-11-21 02:44:07 +00:00
usb_bb.h
usb: Groundwork for USB BOS & Billboard class descriptors.
2014-10-11 02:22:23 +00:00
usb_charge.h
rambi: Leave 5V rail on in S3 if USB ports are powered
2014-01-23 19:32:27 +00:00
usb_console.h
ryu: Enable PD/EC console over USB
2014-11-13 03:14:37 +00:00
usb_hid.h
usb: add USB HID driver
2014-06-19 03:28:43 +00:00
usb_pd_tcpc.h
pd: stm32f0: modify i2c driver to support TCPCI
2015-05-27 02:39:48 +00:00
usb_pd_tcpm.h
pd: implement TCPC RX Detect register to enable/disable TCPC RX
2015-06-03 03:50:06 +00:00
usb_pd.h
pd: Refine HPD debounce values.
2015-05-29 01:37:38 +00:00
usb.h
cleanup: Remove device-specific stuff from include/usb.h
2015-05-28 23:02:08 +00:00
util.h
Queue: Add methods that accept a memcpy routine
2015-01-08 00:38:13 +00:00
vboot_hash.h
Invalidate hash if flash operation changes the hashed region
2012-12-10 15:14:38 -08:00
version.h
zinger: samus_pd: change zinger SW ver to report commit count
2014-08-28 20:12:52 +00:00
watchdog.h
zinger: change watchdog timeout to 1.8 second
2014-06-17 18:34:03 +00:00
wireless.h
Initial Glower commit
2015-01-20 20:56:43 +00:00