Aaron Durbin 17e9c06a1a haswell: Add notes about PL6 weirdness ...

It was found that PL6 behaves in an inverted way when it is
configured as open drain. Add notes about determining why this
is. Apparently PL6 is an oddity w.r.t. the other pins.

BUG=chrome-os-partner:19811
BRANCH=None
TEST=built

Change-Id: I2d5b27f49c4e51ba4eb75cda9c798b9a5793f767
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/58679
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>

2013-06-14 16:16:09 -07:00

..

battery_bq20z453.c

Support battery cut-off mechanism for factory.

2012-08-28 04:39:56 -07:00

battery_falco.c

Use battery's precharge_current value for deep discharge recovery.

2013-06-13 15:52:16 -07:00

battery_link.c

Use battery's precharge_current value for deep discharge recovery.

2013-06-13 15:52:16 -07:00

battery_precharge.c

Add reinit state to charge_state module to distinguish it from at-ec-boot init

2013-02-28 16:12:05 -08:00

battery_slippy.c

Slippy: Adjust battery voltages to be closer to reality.

2013-06-12 15:01:01 -07:00

battery_spring.c

spring: Guard battery cut-off command with lock

2013-06-05 11:25:10 -07:00

build.mk

Falco: Add support for bq24738 charger (and guess at battery).

2013-06-13 09:02:08 -07:00

charge_state.c

Use battery's precharge_current value for deep discharge recovery.

2013-06-13 15:52:16 -07:00

charger_bq24707a.c

Enable ADC charger current monitor for Slippy

2013-06-07 13:13:48 -07:00

charger_bq24725.c

Add support for TI's Smart Battery Charger BQ24707A

2013-06-07 10:52:11 -07:00

charger_bq24738.c

Falco: Disable IFAULT_HI on the BQ24738 charger

2013-06-13 15:52:29 -07:00

charger_common.c

Add support for TI's Smart Battery Charger BQ24707A

2013-06-07 10:52:11 -07:00

chipset.c

Move common chipset console commands to chipset.c

2013-04-24 09:58:22 -07:00

console_output.c

Move files in preparation for merging keyboard_scan modules

2013-03-27 11:35:20 -07:00

console.c

Accept a command if it's a full match

2013-06-05 11:25:09 -07:00

eoption.c

Clean up a few modules in common/

2012-10-26 09:49:38 -07:00

extpower_gpio.c

Move enabling AC_PRESENT interrupt to extpower_gpio.c

2013-04-02 14:12:56 -07:00

extpower_snow.c

Add common implementation for daisy/snow extpower_is_present

2013-04-03 11:49:07 -07:00

extpower_usb.c

Incorporate CABLE_DET circuit change

2013-06-13 17:21:36 -07:00

firmware_image.lds.S

Clean up flash section defines and increase lm4 image size

2013-06-03 14:32:38 -07:00

firmware_image.S

Remove firmware B

2012-07-17 13:11:44 -07:00

flash_common.c

Clean up flash section defines and increase lm4 image size

2013-06-03 14:32:38 -07:00

fmap.c

Clean up flash section defines and increase lm4 image size

2013-06-03 14:32:38 -07:00

gaia_power.c

spring: Keep system power on sysjump

2013-05-28 12:54:02 -07:00

gpio_common.c

Move gpio_get_name() to gpio_common.c

2013-04-11 15:38:08 -07:00

hooks.c

Use uintptr_t when converting integer from/to pointer

2013-05-07 20:59:53 -07:00

host_command.c

Fix flash tests

2013-04-15 20:40:02 -07:00

host_event_commands.c

Change host command params/response pointers to void *

2012-07-26 16:25:34 -07:00

i2c_arbitration.c

Move I2C arbitration to its own file

2013-03-20 15:23:29 -07:00

i2c_common.c

Implement I2C passthru command

2013-05-09 16:36:53 -07:00

ir357x.c

Hook functions no longer return values

2012-10-23 16:49:29 -07:00

keyboard_8042.c

Split out power button code from switch.c

2013-04-25 17:03:18 -07:00

keyboard_mkbp.c

Replace generated CONFIG_TASK_ macros with HAS_TASK_

2013-04-24 16:32:58 -07:00

keyboard_scan.c

do not store the keyboard state on the stack

2013-05-14 10:17:13 -07:00

keyboard_test.c

Move keyboard dimension and key constants to keyboard_config.h

2013-03-22 11:24:29 -07:00

lid_switch.c

Add lid switch test and enable kb_mkbp test

2013-05-08 13:24:19 -07:00

lightbar.c

Split pwm.c into pwm_fan.c and pwm_kblight.c

2013-04-26 16:07:21 -07:00

lp5562_battery_led.c

spring: Show green LED when 94% charged

2013-06-13 22:16:06 -07:00

lp5562.c

Add LP5562 functions to control engine execution state

2013-04-23 10:39:13 -07:00

main.c

Pthread-based emulator for unit testing

2013-05-07 09:09:50 -07:00

memory_commands.c

Use uintptr_t when converting integer from/to pointer

2013-05-07 20:59:53 -07:00

mock_charger.c

Add a test of charging state machine

2012-07-08 20:25:17 -07:00

mock_i8042.c

Rename I8042CMD task to KEYPROTO

2013-03-29 15:39:32 -07:00

mock_smart_battery_stub.c

Add a test of charging state machine

2012-07-08 20:25:17 -07:00

mock_temp_sensor.c

Use SECOND and MSEC constants

2012-10-29 16:52:49 -07:00

mock_x86_power.c

Add parse_bool() to centralize parsing boolean options

2013-03-29 15:39:34 -07:00

onewire_led.c

Rename onewire_led functions and constants

2013-04-05 14:28:49 -07:00

pmu_tps65090_charger.c

Reset charge state machine on charge timeout

2013-05-20 10:54:00 -07:00

pmu_tps65090.c

Print error message before PMU hard reset

2013-06-03 14:32:49 -07:00

port80.c

Clean up a few modules in common/

2012-10-26 09:49:38 -07:00

power_button.c

Split out power button code from switch.c

2013-04-25 17:03:18 -07:00

printf.c

Clean up printf module

2012-10-25 14:12:10 -07:00

pstore_commands.c

Change host command params/response pointers to void *

2012-07-26 16:25:34 -07:00

queue.c

Only waste 1 byte in queue buffer

2013-06-10 01:48:44 -07:00

sha256.c

Clean up vboot hash support

2012-10-25 17:03:44 -07:00

shared_mem.c

Use uintptr_t when converting integer from/to pointer

2013-05-07 20:59:53 -07:00

smart_battery_stub.c

Stub smart battery read/write functions

2012-06-27 03:22:17 -07:00

smart_battery.c

Improve 'sb' command, add 'sbc' command

2013-06-07 10:52:13 -07:00

system_common.c

Enable flash unit test on emulator

2013-06-03 14:34:10 -07:00

temp_sensor.c

Revert "Revert "Add thermal engine test""

2013-05-17 09:52:26 -07:00

test_util.c

Enable flash unit test on emulator

2013-06-03 14:34:10 -07:00

thermal.c

Revert "Revert "Add thermal engine test""

2013-05-17 09:52:26 -07:00

tmp006.c

Handle bus errors on thermal I2C bus

2012-11-26 14:49:49 -08:00

tsu6721.c

Retry when TSU6721 initialization fails

2013-06-11 02:25:22 -07:00

uart_buffering.c

Software flow control in console

2013-04-23 10:39:09 -07:00

usb_port_power_dumb.c

usb: Disable ports on entry to S5

2013-05-22 12:29:20 -07:00

usb_port_power_smart.c

Split the USB port power control into smart and dumb versions.

2013-05-01 15:36:22 -07:00

util.c

Use uintptr_t when converting integer from/to pointer

2013-05-07 20:59:53 -07:00

vboot_hash.c

Invalidate hash if flash operation changes the hashed region

2012-12-10 15:14:38 -08:00

version.c

update versioning information stored in the EC

2012-03-02 16:46:26 +00:00

x86_power_haswell.c

haswell: Add notes about PL6 weirdness

2013-06-14 16:16:09 -07:00

x86_power_ivybridge.c

Split x86_power.c into Ivybridge and Haswell variants

2013-04-30 19:03:03 -07:00