Jett Rink 9a80691c33 octopus: remove ADCs for VBUS ...

Hardware does not support ADCs for Vbus anymore for
all boards except bip. Make bip the same as other octopus
boards (i.e. not using ADCs for Vbus measurements).

BRANCH=none
BUG=b:109747036
TEST=CL stack works with current yorp

Change-Id: I96b82b70799e8b70bf5d479a1714524fc1652140
Signed-off-by: Jett Rink <jettrink@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/1089199
Reviewed-by: Furquan Shaikh <furquan@chromium.org>

2018-06-07 13:11:40 -07:00

..

atlas

atlas: config PCH_PWR_BTN as push-pull

2018-06-05 02:15:30 -07:00

bds

cleanup: remove transition code for LPC/ESPI cleanup

2018-05-23 09:13:50 -07:00

bip

octopus: remove ADCs for VBUS

2018-06-07 13:11:40 -07:00

careena

stoney: Rename GPIO_PCH_RCIN_L to GPIO_SYS_RESET_L

2018-06-05 15:59:33 -07:00

chell

system: update board version to return an error if encountered

2018-04-19 12:46:14 -07:00

cheza

cheza: Read board version from GPIO pins

2018-06-07 08:35:58 -07:00

coffeecake

test/build.mk: Allow boards to specify test lists

2018-05-28 07:30:36 -07:00

coral

lpc: convert LPC only boards to use CONFIG_HOSTCMD_LPC

2018-05-22 21:56:38 -07:00

cr50

cr50: add command for factory reset

2018-05-31 16:22:35 -07:00

dingdong

cleanup: CONFIG_USB_PD_CUSTOM_VDM is not used

2018-04-09 15:19:00 -07:00

discovery

chip/stm32/usart: Add flags to usart_config

2017-10-18 08:30:16 -07:00

discovery-stm32f072

chip/stm32/usart: Add flags to usart_config

2017-10-18 08:30:16 -07:00

elm

power: Rename mediatek to mt817x

2018-06-07 13:11:29 -07:00

eve

espi: rename remaining eSPI options

2018-05-23 09:13:49 -07:00

fizz

Fizz: Increase VR3 voltage to avoid boot failure

2018-05-30 01:02:36 -07:00

glados

system: update board version to return an error if encountered

2018-04-19 12:46:14 -07:00

glados_pd

test/build.mk: Allow boards to specify test lists

2018-05-28 07:30:36 -07:00

glkrvp

espi: convert all eSPI board to use CONFIG_HOSTCMD_ESPI

2018-05-22 21:56:37 -07:00

glkrvp_ite

it83xx: espi: enable eSPI_reset#

2018-06-06 01:16:12 -07:00

grunt

stoney: Rename GPIO_PCH_RCIN_L to GPIO_SYS_RESET_L

2018-06-05 15:59:33 -07:00

hadoken

test/build.mk: Allow boards to specify test lists

2018-05-28 07:30:36 -07:00

hammer

whiskers: Expose a switch for tablet mode

2018-06-06 05:00:49 -07:00

hoho

cleanup: CONFIG_USB_PD_CUSTOM_VDM is not used

2018-04-09 15:19:00 -07:00

host

Cr50: Add logging functionality to PinWeaver.

2018-04-27 12:22:26 -07:00

it83xx_evb

it83xx: Add a config option for enabling mouse LDN

2018-05-26 00:21:44 -07:00

jerry

power: Rename rockchip to rk3288

2018-06-07 13:11:29 -07:00

kahlee

stoney: Rename GPIO_PCH_RCIN_L to GPIO_SYS_RESET_L

2018-06-05 15:59:33 -07:00

kevin

chip/npcx: Increase default stack size for tasks

2018-05-16 05:08:30 -07:00

mchpevb1

espi: rename remaining eSPI options

2018-05-23 09:13:49 -07:00

meowth_fp

meowth_fp: update AP interrupt configuration

2018-06-04 10:09:41 -07:00

nami

Nami: Change battery config to AP15O5L for Akali

2018-06-07 08:35:56 -07:00

nautilus

espi: rename remaining eSPI options

2018-05-23 09:13:49 -07:00

nocturne

nocturne: Change SYS_RST_L to open drain.

2018-06-07 08:36:11 -07:00

npcx7_evb

espi: rename remaining eSPI options

2018-05-23 09:13:49 -07:00

npcx_evb

lpc: convert LPC only boards to use CONFIG_HOSTCMD_LPC

2018-05-22 21:56:38 -07:00

npcx_evb_arm

system: update board version to return an error if encountered

2018-04-19 12:46:14 -07:00

nucleo-f072rb

eCTS: Add nested interrupt test (Low->High)

2016-11-09 23:26:30 -08:00

nucleo-f411re

board: In motion sensor array, remove assignment to 0

2018-03-14 07:04:02 -07:00

oak

power: Rename mediatek to mt817x

2018-06-07 13:11:29 -07:00

pdeval-stm32f072

Makefile.rules: Add buildalltests target

2018-05-26 00:21:41 -07:00

phaser

octopus: remove ADCs for VBUS

2018-06-07 13:11:40 -07:00

plankton

cleanup: CONFIG_USB_PD_CUSTOM_VDM is not used

2018-04-09 15:19:00 -07:00

polyberry

chip/stm32/usb: Replace reset handler by generic event handler

2017-08-16 04:03:24 -07:00

poppy

espi: rename remaining eSPI options

2018-05-23 09:13:49 -07:00

rainier

system: update board version to return an error if encountered

2018-04-19 12:46:14 -07:00

reef

lpc: convert LPC only boards to use CONFIG_HOSTCMD_LPC

2018-05-22 21:56:38 -07:00

reef_it8320

Makefile.rules: Add buildalltests target

2018-05-26 00:21:41 -07:00

rowan

power: Rename mediatek to mt817x

2018-06-07 13:11:29 -07:00

samus

test/build.mk: Allow boards to specify test lists

2018-05-28 07:30:36 -07:00

samus_pd

test/build.mk: Allow boards to specify test lists

2018-05-28 07:30:36 -07:00

scarlet

scarlet: Don't disable idle mode in S3

2018-05-31 03:50:24 -07:00

servo_micro

Documentation for CCD and servo_micro

2018-04-13 01:43:28 -07:00

servo_v4

servo_v4: use coreboot toolchain

2018-06-05 21:28:45 -07:00

stm32f446e-eval

chip/stm32/usb: Replace reset handler by generic event handler

2017-08-16 04:03:24 -07:00

stm32l476g-eval

eCTS: Expedite flashing time

2017-06-28 21:50:51 -07:00

strago

Makefile.rules: Add buildalltests target

2018-05-26 00:21:41 -07:00

sweetberry

sweetberry: expose i2c over usb

2018-05-21 18:19:29 -07:00

tigertail

usb_i2c: Remove usb_i2c_board_enable/disable

2017-11-20 23:25:45 -08:00

twinkie

twinkie: clean-up disabled SNIFFER_HEADER_V2 code

2017-10-31 03:54:43 -07:00

wheatley

espi: rename remaining eSPI options

2018-05-23 09:13:49 -07:00

yorp

octopus: remove ADCs for VBUS

2018-06-07 13:11:40 -07:00

zinger

cleanup: CONFIG_USB_PD_CUSTOM_VDM is not used

2018-04-09 15:19:00 -07:00

zoombini

ppc: making driver non-const

2018-05-24 15:44:30 -07:00

chell_pd

chell: Add EC/PD configuration for chell board

2015-10-12 13:15:48 -07:00

gru

gru: Initial mainboard commit

2016-05-04 16:15:02 -07:00

lux

lux: Add lux board

2018-01-10 12:58:55 -08:00

meowth

Meowth: Added initial board file.

2017-11-15 20:21:12 -08:00

minimuffin

zinger: minimuffin: add board support for minimuffin

2014-10-02 20:51:10 +00:00

nocturne_fp

Add nocturne_fp board configuration

2018-04-10 19:12:40 -07:00

oak_pd

oak_pd: change oak_pd to be a sym link to glados_pd

2015-11-04 07:08:35 -08:00

OWNERS

Add OWNERS files

2014-04-02 19:58:53 +00:00

soraka

soraka: Replace individual files symlinks by directory symlinks

2018-01-05 12:10:01 -08:00

staff

hammer: Add staff board

2017-05-16 07:47:05 -07:00

wand

wand: Add wand board

2017-12-20 05:49:34 -08:00

whiskers

board: Add support for whiskers board

2017-11-09 16:43:54 -08:00